Philips Fidelio 9000 series BDP9700/12

Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
BDP9700
1 Hookup and play
EN
Before you connect this Blu-ray disc/ DVD player, read and understand all accompanying
instructions.
This product incorporates proprietary technology under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well
as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Cinavia Notice
This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information
Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a
postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
2
SMART TV
ZOOM
ANGLE
DISC MENU
POP-UP
MENU
TOP
MENU
OK
BDP9700
PC & Mac
1
HDMI OUT(MAIN)
VIDEO
HDMI OUT
(AV RECEIVER) COAXIAL OPTICAL
3
2
1 HDMI OUT(MAIN)
2 VIDEO+AUDIO L/R
4
OPTICAL
COAXIAL
HDMI OUT (AV RECEIVER)
7.1 CH AUDIO OUT
5
3
4
5
1
2
SOURCE
TV
6
6
2
BD/BD 3D
DVD/VCD/CD
DivX Plus HD/MKV
MP3 / JPEG
3
1
DISC MENU
POP-UP
MENU
4
TOP
MENU
OK
1
USB
2
3
DISC MENU
POP-UP
MENU
TOP
MENU
OK
7
Contents
1 Hookup and play 2-7
2 Use your Blu-ray disc/ DVD player 10
Basic play control Video, audio and picture options DivX videos Synchronize audio with video Play a musical slideshow BonusView on Blu-ray BD-Live on Blu-ray Play a Blu-ray 3D video View 2D video/picure in 3D effect Set up a network Smartphone control Browse PC through DLNA Browse Smart TV Skype Use a USB keyboard or mouse Use Philips EasyLink Stream media from an Android device 3 Change settings Picture Sound Network (installation, Smart TV...) Preference (languages, parental
control...) Advanced options (clear memory...) 10
11
12
13
13
13
13
14
14
14
15
16
16
16
17
17
18
19
19
19
20
20
21
4 Update software 22
22
22
5 Specifications 23
6 Troubleshooting 24
7 Trademarks 27
Update software via the Internet Update software via USB EN
9
2 Use your Bluray disc/ DVD
player
During play, press the following buttons to
control.
Button
SMART TV
Congratulations on your purchase, and
welcome to Philips! To fully benefit from
the support that Philips offers (e.g. product
software upgrade), register your product at
www.philips.com/welcome.
Basic play control
SMART TV
ZOOM
ANGLE
ZOOM
REPEAT
ANGLE
Color
buttons
DISC MENU
/ POP-UP
MENU
TOP MENU
DISC MENU
POP-UP
MENU
TOP
MENU
OK
OK
BACK
OPTIONS
/
/
10
EN
Action
Turn on the player, or switch
to standby.
Access online services. (This
function will be activated with
a software update in 2013.)
Zoom into a picture. Press
to select a zoom factor.
Repeat a chapter, title or
selected folder.
Select a camera angle.
Select tasks or options for
Blu-ray discs.
Access the home menu.
Access or exit the disc menu.
Access the main menu of a
video disc.
Navigate the menus.
Press
to rotate a picture
clockwise or counter-clockwise
during slideshow.
Confirm a selection or entry.
Return to a previous display
menu.
Access more options during
play.
Stop play.
Start or resume play.
Pause play.
Press repeatedly to slow
forward frame by frame.
Skip to the previous or next
track, chapter or file.
Fast backward or forward.
Press repeatedly to change the
search speed.
Press once, and then press
to slow forward.
TV VOL+/TV
TV CH+/Alphanumeric
buttons
SUBTITLE
AUDIO
Change TV volume.(Function
available for Philips TVs only.)
Mute TV sound.(Function
available for Philips TVs only.)
Open or close the disc
compartment.
Select a TV channel.(Function
available for Philips TVs only.)
Select an item to play.
Enter values.
Enter letters via SMS style
entry.
Select a subtitle language.
Select an audio language or
channel.
Video, audio and picture
options
More options are available for video or picture
play from a disc or USB storage device.
•
•
•
•
•
•
•
•
•
•
•
•
•
Video options
•
DISC MENU
MENU
POP UP
POP-UP
MENU
2
TOP
MENU
•
OK
3
1
[Character set]: Select a character set that
supports the DivX video subtitle (only for
DivX videos).
[Time search]: Skip to a specific time
via the numeric buttons on the remote
control.
[2nd audio language]: Select the second
audio language (only for Blu-ray discs that
support BonusView).
[2nd Subtitle Language]: Select the second
subtitle language (only for Blu-ray discs that
support BonusView).
[Titles]: Select a title.
[Chapters]: Select a chapter.
[Angle list]: Select a camera angle.
[Menus]: Display a disc menu.
[PIP selection]: Display a picture-in-picture
window (only for Blu-ray discs that support
BonusView).
[Zoom]: Zoom into a video picture. Press
to select a zoom factor.
[Repeat]: Repeat a chapter or title.
[Repeat A-B]: Mark two points within a
chapter for repeat play, or turn off repeat
mode.
[2D to 3D]: Convert instantly a 2D video
to be viewed in 3D effect.
[Picture settings]: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
[Audio sync]: Synchronize audio with
video (HDMI connection between this
player and your TV is needed).
Note
•• Available video options depend on the video source.
Access more options during video play.
• [Audio language]: Select an audio language.
• [Subtitle Language]: Select a subtitle
language.
• [Subtitle shift]: Change the subtitle
position on the screen. Press
to
change the subtitle position.
• [Information]: Display play information.
EN
11
•
Picture options
DISC MENU
MENU
POP UP
POP-UP
MENU
2
TOP
MENU
OK
3
1
Access more options during slideshow.
• [Rotate +90]: Rotate a picture 90 degrees
clockwise.
• [Rotate -90]: Rotate a picture 90 degrees
counter-clockwise.
• [Zoom]: Zoom into a picture. Press
to
select a zoom factor.
• [Information]: Display picture information.
• [Duration per slide]: Set a display interval
for a slideshow.
• [Slide animation]: Select a transition effect
for a slideshow.
• [Picture settings]: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
• [Repeat]: Repeat a selected folder.
• [2D to 3D]: Convert instantly a 2D picture
to be viewed in 3D effect.
Audio options
Turn off a repeat mode.
DivX videos
You can play DivX videos from a disc, a USB
storage device, or an online video store (see
"Rent online videos).
VOD code for DivX
• Before you purchase DivX videos and play
them on this player, register this player on
www.divx.com using the DivX VOD code.
• Display the DivX VOD code: press , and
select [Setup] > [Advanced] > [DivX®
VOD Code].
DivX subtitles
• Press SUBTITLE to select a language.
• If the subtitle is not displayed correctly,
change the character set that supports the
DivX subtitle. Select a character set: press
OPTIONS, and select [Character set].
Character
set
[Standard]
[Central
Europe]
[Cyrillic]
OK
[Greek]
[Baltic]
Press OPTIONS repeatedly to cycle through
the following options.
• Repeat the current track.
• Repeat all the tracks on the disc or folder.
• Play audio tracks in a random loop.
12
EN
Languages
English, Albanian, Danish,
Dutch, Finnish, French, Gaelic,
German, Italian, Kurdish (Latin),
Norwegian, Portuguese, Spanish,
Swedish, and Turkish
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene,
and Serbian
Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian, and Ukrainian
Greek
Northern Europe
Note
•• To play DivX DRM protected files from a USB storage
device, or an online video store, connect this player to a
TV through HDMI.
•• To use the subtitles, make sure that the subtitle file
has the same name as the DivX video file name. For
example, if the DivX video file is named “movie.avi",
save the subtitle file as “movie.srt”, or “movie.sub”.
•• This player can play subtitle files in the following
formats: .srt, .sub, .txt, .ssa, and .smi.
Synchronize audio with video
You can adjust the audio delay time when video
is out of sync with audio.
1
2
3
4
Make sure that this player is connected to
your TV through HDMI.
During play, press OPTIONS.
»» The options menu is displayed.
Select [Audio sync].
Press
to select a value until audio is in
sync with video.
Play a musical slideshow
This feature is only applicable to Blu-ray discs
compatible with BonusView (also known as
picture in picture).
1
2
3
2
3
1
2
4
5
BACK, and go to the picture
Select a picture from the same disc or
USB, and press OK to start slideshow.
Press
to stop slideshow.
Press
again to stop music play.
BonusView on Blu-ray
»» The secondary video window is
displayed.
Select [2nd audio language] or [2nd
Subtitle Language], and press OK.
Access exclusive online services, such as movie
trailers, games, ringtones and other bonus
contents.
This feature is only applicable to Blu-ray discs
that are BD-Live enabled.
From a disc or connected USB storage
device, play a music file.
Press
folder.
Select [PIP selection] > [PIP], and press
OK.
»» PIP options [1]/[2] depend on the
video contents.
BD-Live on Blu-ray
Play music and pictures simultaneously to create
a musical slideshow.
1
During play, press OPTIONS.
»» The options menu is displayed.
3
4
5
Prepare the Internet connection and set
up a network (see "Set up a network").
Connect a USB storage device to this
player.
• A USB storage device is used to store
the downloaded BD-Live content.
• To delete the BD-Live previously
downloaded on the USB storage
device for memory release, press
and select [Setup] > [Advanced] >
[Clear memory].
Play a disc that is BD-Live enabled.
On the disc menu, select the BD-Live icon,
and press OK.
»» BD-Live starts to load. The loading
time depends on the disc and the
Internet connection.
On the BD-Live interface, select an item
to access.
View special content (such as commentaries) in
a small screen window.
EN
13
Note
•• BD-Live services vary from discs and countries.
•• When you use BD-Live, data on the disc and this player
are accessed by the content provider
•• Use a USB storage device with at least 1GB of free
space to store the download.
Play a Blu-ray 3D video
What you need
• A 3D compliant TV
• This player is connected to the TV through
HDMI
• 3D glasses compatible with the TV
1
2
3
Make sure that 3D output is turned on:
press , and select [Setup] > [Video]
>[Watch 3D video] > [Auto].
Play a Blu-ray 3D video.
Put on the 3D glasses for 3D effects.
• To play 3D video in 2D, turn off Blu-ray
3D output (press , and select [Setup]
> [Video] > [Watch 3D video] >
[Off]).
View 2D video/picure in 3D
effect
4
Put on the 3D glasses for 3D effects.
Set up a network
Connect this player to a computer network and
the Internet to access the services:
• Browse PC (DLNA): play photos, music,
and video files streamed from your
computer.
• Browse Smart TV: access online services,
such as pictures, music and video stores.
• Video call: access Skype service.
• Update software: update the software of
this player via the Internet.
• BD-Live: access online bonus features
(applicable to Blu-ray discs that are BDLive enabled).
1
Connect this player to a computer
network and the Internet, through wired
(Ethernet) or wireless connection.
• For wired connection, connect a
network cable (not supplied) to the
LAN port on the back panel of this
player.
PC (DLNA)
You can convert 2D videos or pictures to be
viewed in 3D effect.
What you need
• A 3D compliant TV
• This player is connected to the TV through
HDMI
• 3D glasses compatible with the TV
1
2
3
14
Play 2D video or pictures on this player.
Press OPTIONS.
»» The options menu is displayed.
Select [2D to 3D] > [On].
»» 2D video or pictures are converted to
3D effect.
EN
• This player has a built-in Wi-Fi for a
wireless connection.
PC (DLNA)
• For Android based device, search for
the application in Android Market
Before you start
• Connect this player to a home network
(see "Set up a network").
• Connect your smartphone to the same
home network (see the user manual of the
smartphone for details).
• Turn on this player
Control your player
Use a smartphone to browse, control and play
media files from this player.
2
Perform the network installation.
1) Press .
2) Select [Setup], and press OK.
3) Select [Network] > [Network
installation], and press OK.
4) Follow the instructions on the TV screen to
complete the installation.
Caution
•• Before you connect to a network, familiarize yourself
with the network router, media server software for
DLNA, and networking principles. If necessary, read
documentation accompanying network components.
Philips is not responsible for lost, damaged, or corrupt
data.
1
2
3
4
5
Smartphone control
Use a smartphone to browse, control and play
media files from this player.
What you need
• An iPhone (iOS 3.1.3 and above) or
Android based device (Android 2.1 and
above)
• On your smartphone, download Philips
MyRemote application
• For iPhone, search for the application
in App Store
6
Insert a data disc or USB storage device
into this player.
On your smartphone, tap the MyRemote
icon from the home screen.
»» The name of this player is displayed on
the smartphone.
Select this player from the smartphone
screen.
»» The smartphone used as a virtual
remote control is enabled.
On the smartphone, tap the Media
(Media) tab, and then select the disc or
USB source.
»» The folders in the data disc or USB
storage device are displayed.
Open a folder, and select a file to play.
• To access the remote control, return
to the previous smartphone screen,
and then tap the Remote (Remote)
tab. Only the relevant control buttons
are enabled.
Tap the control buttons on the
smartphone to control play.
• To access more control buttons, swipe
the screen to the left or right.
• To exit the application, press the home
button on the smartphone.
EN
15
Browse PC through DLNA
Through this player, you can stream and play
video, music and photo from a computer on
your TV.
Before you start
• On your PC, install a DLNA-compliant
media server application (such as Windows
Media Player 11 or higher)
• On your PC, enable media sharing and file
sharing (see the "Help" document in the
media server application)
1
2
3
4
Connect this player and your PC in the
same home network (see "Set up a
network").
• For better video quality, use wired
network connection whenever
possible.
Press .
»» The home menu is displayed on the
TV screen.
Select [browse PC], and press OK.
»» A content browser is displayed.
Select a file, and press OK to play.
• Use the remote control to control play.
Browse Smart TV
You can access variety of Internet applications
and specially adapted Internet websites.
Note
•• Koninklijke Philips Electronics N.V. bears no
responsibility for content provided by Smart TV service
providers.
1
2
16
Connect this player to the Internet (see
"Set up a network").
Press .
»» The home menu is displayed on the
TV screen.
EN
3
4
5
Select [Smart TV], and press OK.
Follow the onscreen instructions to
confirm the onscreen message.
»» The online services available in your
country are displayed.
Use the remote control to navigate and
select an Internet application.
Button
OK
BACK
OPTIONS
Alphanumeric
buttons
TOP MENU
Action
Navigate and select an a
service or item.
Confirm a selection.
Return to a previous page, or
delete input text.
Access options related to a
current activity.
Input text (such as an email
address, web URL and
password).
Return to the Smart TV home
screen.
To remove the passwords and cookies from
this player, see the section: Change settings >
Network (installation, Smart TV...).
Skype
Use Skype to make video calls or voice calls
with your friends over the Internet.
No emergency calls with Skype.
Skype is not a replacement for your telephone
and cannot be used for emergency calling.
What you need
• A high-speed Internet connection to this
player.
• A dedicated Skype camera (not supplied):
to purchase the camera, visit www.freetalk.
me/philips.
1
Connect this player to the Internet (see
“Set up a network”).
2
3
4
5
6
Connect the Skype camera to the USB
connector at the rear panel of this player.
• If your connect more peripheral USB
devices, connect a USB hub to this
player to make multiple USB ports
available.
1
Press .
»» The home menu is displayed on the
TV screen.
Select [Video call], and press OK.
Log in your Skype account.
• If you do not have a Skype account,
follow the onscreen instructions to
create it.
• To enter your Skype name and
password, follow the onscreen
instructions.
Use the remote control to select onscreen
options (such as an audio or video call).
Button
OK
BACK
OPTIONS
Action
Navigate and select an a service
or item.
Confirm a selection.
Delete input text, or return to a
previous page.
Access options related to a
current activity.
Note
•• For more information on Skype, visit www.skype.com.
•• Use of a wireless network connection may cause
degradation of image and audio quality.
Use a USB keyboard or
mouse
For convenience of Internet usage, you can
connect a USB keyboard and/or mouse to type
text and navigate pages on the Internet.
2
Connect a USB keyboard or mouse to the
USB connector at the rear panel of this
player.
• If you connect more peripheral USB
devices, connect a USB hub to this
player to make multiple USB ports
available.
• You also can connect a wireless USB
keyboard or mouse (see the user
manual of the wireless device for
details).
Use the keyboard to type text, or the
mouse to navigate web pages.
• To change a language for the keyboard,
press , and select [Setup] >
[Preference] > [Keyboard layout].
Note
•• If a USB hub is used with this player, do not overload
the USB hub with many USB devices to avoid
insufficient USB power.
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1
2
3
4
Connect the HDMI CEC compliant devices
through HDMI, and turn on the HDMI
CEC operations on the TV and other
connected devices (see the user manual of
the TV or other devices for details).
Press
.
Select [Setup]> [EasyLink].
Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
»» EasyLink function is turned on.
EN
17
One Touch Play
When a video disc is in the disc compartment,
press to wake up the TV from standby, and
then play a disc.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
Stream media from an
Android device
With Philips SimplyShare, through this player
you can stream media files from an Android
based device on your TV. For details, visit www.
philips.com/support
18
EN
3 Change settings
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
This section helps you change the settings of
this player.
Note
•• If you change a setting, make sure that the TV supports
1
the new setting.
•• For settings related to HDMI, the TV must be
DISC MENU
POP-UP
MENU
2
TOP
MENU
connected through HDMI.
•• For the composite connection (via the VIDEO
OK
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.
DISC MENU
POP-UP
MENU
3
TOP
MENU
Watch 3D video
OK
Sound
1
2
Note
•• You cannot change a menu option that is grayed out.
•• To return to the previous menu, press
BACK. To
exit the menu, press
.
Picture
1
2
Press
.
Select [Setup] > [Video] to access the
video setup options.
• [TV display]: Select a picture display
format to fit the TV screen.
• [HDMI video]: Select an HDMI video
resolution.
• [HDMI Deep Color]: Display colors
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
• [Picture settings]: Select the most
optimum picture setting (powered by
CinemaPerfect HD).
Press
.
Select [Setup] > [Audio] to access the
audio setup options.
• [Night mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
• [Neo 6]: Enable or disable a surround
sound effect which is converted from
2.0 channel audio.
• [HDMI (MAIN) audio]: Select an audio
format for sound output when this
player is connected to a TV through
HDMI OUT (MAIN) connector.
• [HDMI (AVR) audio]: Select an audio
format for sound output when this
player is connected to a AV receiver
through HDMI OUT (AV RECEIVER)
connector ("AVR" is short for "AV
Receiver").
• [Digital Audio]: Select an audio format
for the sound output when this
player is connected through a digital
connector (COAXIAL or OPTICAL).
• [PCM Downsampling]: Set the
sampling rate for PCM audio output
EN
19
when this player is connected through
a digital connector (COAXIAL or
OPTICAL).
• [Speaker setup]: Set the volume level
and distance of each speaker to obtain
the best possible surround sound.
Note
•• For settings related to HDMI, the TV must be
connected through HDMI.
•• For a DSD compliant receiver through HDMI OUT
(AV RECEIVER) connection, select [Bitstream] under
[HDMI (AVR) audio] to enable DSD audio output.
•• For best audio quality through analog audio connection,
select [Off] under [HDMI (MAIN) audio] and select
[Bitstream] under [Digital Audio] to enable DSD audio
output.
•• If DSD audio output is enabled (HDMI or analog),
digital audio output is muted.
•• Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
Network (installation, Smart
TV...)
1
2
20
Press
.
Select [Setup] > [Network] to access the
network setup options.
• [Network installation]: Start a wired
or wireless installation to make the
network work.
• [View network settings]: Display the
current network status.
• [View wireless settings]: Display the
current Wi-Fi status.
• [Clear Smart TV memory]: Clear the
history of Smart TV browser (such as
cookies).
• [Name your Product:]: Re-name this
player for identification in a home
network.
EN
Preference (languages,
parental control...)
1
2
Press
.
Select [Setup] > [Preference] to access
the preference setup options.
• [Menu language]: Select an onscreen
display menu language.
• [Keyboard layout]: Select a language
for a connected keyboard.
• [Audio]: Select an audio language for
video.
• [Subtitle]: Select a subtitle language for
video.
• [Disc menu]: Select a menu language
for a video disc.
• [Parental control]: Restrict access to
discs that are encoded with ratings.
Input "0000" to access the restriction
options. To play all discs irrespective of
the rating, select level "8".
• [HDMI Out] : Set the number of
HDMI outputs in use.
• [Screen saver]: Enable or disable
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [Auto subtitle shift]: Enable or disable
subtitle shift. If enabled, the subtitle
position is changed automatically to fit
the TV screen (this feature works with
some Philips TVs only).
• [Change password]: Set or change
a password to play a restricted disc.
Input "0000" if you do not have a
password or if you have forgotten your
password.
• [Display panel]: Change the brightness
of the display panel of the player.
• [Auto standby]: Enable or disable
auto standby. If enabled, the player
switches to standby after 30 minutes
of inactivity (for example, in pause or
stop mode).
• [Fast wake up]: Enable or disable the
player to wake up faster from standby.
If fast wakeup is turned off, less power
is consumed during standby.
• [VCD PBC]: Display or skip the
content menu for VCD and SVCD.
• [SACD layer]: Select an option to play
SACD or CDDA on a hybrid SACD
(selectable only when no disc is loaded,
or the disc compartment is ejected).
• [Restore default settings]: Reset this
player to the default settings made at
the factory, except for password and
parental control level.
Note
•• You cannot restrict Internet access on commercial
Blu-ray discs.
•• Before you purchase DivX videos and play them on this
player, register this player on www.divx.com with the
DivX VOD code.
Note
•• If your preferred language is not available for disc
language, audio or subtitle, you can select [Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
•• If you select a language which is not available on a disc,
this player uses the default language of the disc.
Advanced options (clear
memory...)
1
2
Press
.
Select [Setup] > [Advanced] to access the
advanced setup options.
• [BD-Live security]: Restrict or allow
access to BD-Live (only for noncommercial, user-created BD-Live
discs).
• [Downmix mode]: Control 2-channel
stereo audio output.
• [Software update]: Select to update
software from a network or from USB
storage device.
• [Clear memory]: Delete the previous
BD-Live download on the USB
storage device. A "BUDA" folder is
automatically created to store the BDLive download.
• [DivX® VOD Code]: Display the
DivX® registration code or the
deregistration code for this player.
• [Version information]: Display the
software version of this player.
EN
21
4 Update software
Before you update the software of this player,
check the current software version:
• Press , and then select [Setup] >
[Advanced] > [Version information], and
press OK.
Update software via the
Internet
1
2
3
4
Connect the player to the Internet (see
"Set up a network").
Press
, and select [Setup].
Select [Advanced] > [Software update]>
[Network].
»» If an upgrade media is detected, you
are prompted to start the update.
Follow the instructions on the TV screen
to update the software.
»» When the update is complete, this
player automatically turns off and on
again.
Update software via USB
1
2
Check the latest software version on www.
philips.com/support.
• Search for your model and click on
"Software and drivers".
Download the software into a USB storage
device.
aUnzip the download, and make sure
that the unzipped folder is named
"UPG_ALL".
bPut the "UPG_ALL" folder in the root
directory.
22
EN
3
4
5
6
Connect the USB storage device to the
(USB) connector on this player.
Press
, and select [Setup].
Select [Advanced] > [Software update]>
[USB].
»» If an upgrade media is detected, you
are prompted to start the update.
Follow the instructions on the TV screen
to update the software.
»» When the update is complete, this
player automatically turns off and on
again.
Caution
•• Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
5Specifications
Note
•• Specifications are subject to change without notice
Region code
This player can play discs with the following
region codes.
DVD
Blu-ray
B
Countries
Europe,
United
Kingdom
Playable media
• BD-Video, BD 3D
• DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer)
• VCD/SVCD
• Audio CD, CD-R/CD-RW, MP3 media,
WMA media, JPEG files
• DivX (Ultra)/DivX Plus HD media, MKV
media
• USB storage device
• SACD
File container
• Video: .avi, .divx, .mp4/m4v, .mkv, .asf/wmv,
.mpg/mpeg, .m2ts
• Audio: .aac/m4a, .mp3, .wma, .mka, 3GP,
FLAC
• Picture: .jpg, .gif, .png
Video
• Signal system: PAL / NTSC
• Composite video output: 1 Vp-p (75 ohm)
• HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p/24Hz, 4KX2K(QDEO)
Audio
• 2 Channel analog output
• Audio Front L + R : 2 Vrms
(> 1 kohm)
• 7.1 Channel analog output
• Audio Front L + R : 2 Vrms
(> 1 kohm)
•
•
•
•
• Audio Surrond L + R : 2 Vrms
(> 1 kohm)
• Audio Center : 2 Vrms (> 1 kohm)
• Audio Subwoofer : 1.15 Vrms
(> 1 kohm)
• Audio Rear L + R: 2 Vrms (> 1 kohm)
Digital output: 0.5 Vp-p (75 ohm)
• Optical, Coaxial
HDMI output
Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 112 kbps - 320 kpbs
• WMA: 48 kpbs - 192 kpbs
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
• File system: FAT16, FAT32, NTFS
• USB port: 5V , 500mA (for each port)
• Support HDD (a portable hard disc drive):
an external power source may be needed.
Main unit
• Power supply rating: AC 220-240V~, 50 Hz
• Power consumption: 30 W
• Power consumption in standby mode (fast
wakeup disabled): < 0.16 W
• Dimensions (w x h x d):
435 x 90 x 268 (mm)
• Net Weight: 3.98 kg
Accessories supplied
• Remote control and batteries
• AC power cable
• User manual
• CD-ROM built in multi-lingual user manual
(Continental Europe only)
Laser Specification
• Laser Type (Diode): AlGaInN (BD), AlGaInP
(DVD/CD)
• Wave length: 398 ~ 412nm (BD), 650 ~
664nm (DVD), 784 ~ 796nm (CD)
• Output power (Max ratings): 20mW (BD),
7mW (DVD), 7mW (CD)
EN
23
6Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this player do not work.
• Disconnect this player from the power
supply for a few minutes, and then
reconnect.
Picture
No picture.
• Make sure that the TV is switched to the
correct source input for this player.
• For the composite connection (via the
VIDEO connector) to the TV, on this player
select a video resolution of 480i/576i or
480p/576p to enable video output (press
, and select [Setup] > [Video] > [HDMI
video]) .
No picture on HDMI connection.
• Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.
• On the remote control, press and then
press “731” (numeric buttons) to recover
24
EN
picture display. Or wait for 10 seconds for
auto recovery.
• If this player is connected to an
unauthorized display device with an HDMI
cable, the audio and video signals may not
be output.
The disc does not play high-definition video.
• Make sure that the disc contains highdefinition video.
• Make sure that the TV supports highdefinition video.
Sound
No audio output from the TV.
• Make sure that the audio cables are
connected to the audio input of the TV.
• Make sure that the TV is switched to the
correct source input for this player.
No audio output from the loudspeakers of
the external audio device (home theater or
amplifier).
• Make sure that the audio cables are
connected to the audio input of the audio
device.
• Switch the external audio device to the
correct audio source input.
No 7.1 channel audio from the loudspeaker of
the audio system.
• Make sure that the disc contains 7.1
channel audio.
• Make sure that the audio device supports
7.1 channel audio.
• Make sure that the audio format is
supported by the disc and the connected
audio device (amplifier/receiver).
• For play of video files with DTS multichannel audio from USB or DLNA, only 2
channel audio can be heard from multichannel connection.
No sound on HDMI connection.
• You may not hear any sound from the
HDMI output if the connected device
is non-HDCP compliant or only DVIcompatible.
•
No secondary audio output for Picture-inPicture feature.
• When [Bitstream] under [HDMI (MAIN)
audio], [HDMI (AVR) audio] or [Digital
Audio] menu is selected, interactive sound
like secondary sound for Picture-in-Picture
feature is muted. De-select [Bitstream].
No SACD/DSD audio output.
• For a hybrid SACD, select SACD option
under > [Setup] > [Preference] >
[SACD layer] (selectable only when no
disc is loaded, or the disc compartment is
ejected).
• For a DSD compliant receiver through
HDMI OUT (AV RECEIVER) connection,
to enable DSD audio output, select
[Bitstream] under [HDMI (AVR) audio]
(press > [Setup] > [Audio]).
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the disc is correctly loaded.
• Make sure that this player supports the
disc. See "Specifications".
• Make sure that this player supports the
region code of the DVD or BD.
• For DVD±RW or DVD±R, make sure that
the disc is finalized.
Cannot play DivX video files.
•• Make sure that the DivX video file is
complete.
•• Make sure that the video file name
extension is correct.
•• To play DivX DRM protected files from a
USB storage device or a network, connect
this player to a TV through HDMI.
DivX subtitles do not display correctly.
•• Make sure that the subtitle file has the
same name as the DivX video file.
•• Make sure that the subtitle file has an
extension name supported by this player
(.srt, .sub, .txt, .ssa, or .smi).
Cannot read the contents of a connected USB
storage.
•• Make sure that the format of the USB
storage device is compatible with this
player.
•• Make sure that the file system on the USB
storage device is supported by this player.
•• For a USB HDD (a portable hard disc
drive), an external power source may be
needed.
'No entry' or 'x' sign is displayed on the TV.
•• The operation is not possible.
EasyLink feature does not work.
• Make sure that this player is connected
to the Philips brand EasyLink TV, and the
EasyLink option is turned on (see "Use
your Blu-ray disc/ DVD player" > "Use
Philips EasyLink").
Cannot access BD-Live features.
• Make sure that this player is connected to
the network (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
• Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
• Make sure that the Blu-ray disc supports
BD-Live features.
• Clear memory storage (see "Change
settings" > "Advanced options (BD-Live
security, clear memory...)").
Network
Wireless network is not found or distorted.
• Make sure that the network is correctly
connected (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
• Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
• Make sure that the wireless network is
not disturbed by microwave ovens, DECT
phones, or other neighboring Wi-Fi devices.
• If the wireless network does not work
properly, try a wired network installation
EN
25
(see "Use your Blu-ray disc/ DVD player" >
"Set up a network").
Smart TV does not work.
• Make sure that the network is correctly
connected (see "Use your Blu-ray disc/
DVD player" > "Set up a network").
• Make sure that the network installation is
made (see "Use your Blu-ray disc/ DVD
player" > "Set up a network").
• Check the router connection (refer to the
user manual for the router).
Browse PC and Smart TV work slowly.
• Look in your wireless router’s user manual
for information on indoor range, transfer
rate, and other factors of signal quality.
• You need a high speed Internet connection
for your router.
3D videos
Cannot see 3D effects
• Make sure that 3D output is turned on(see
"Use your Blu-ray disc/ DVD player" >
"Play a Blu-ray 3D video").
• Make sure that the disc title being played is
Blu-ray 3D compliant.
• Make sure that the TV is 3D and HDMI
compliant, and the TV is set to 3D mode
(refer to the TV's user manual).
• Make sure that the 3D glasses are activated
(refer to the TV’s user manual).
26
EN
7Trademarks
‘Blu-rayTM’, ‘Blu-ray DiscTM’, ‘Blu-ray DiscTM’ logo,
‘Blu-ray 3DTM’ and ‘Blu-ray 3DTM’ logo are the
trademarks of Blu-ray Disc Association.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered
in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
DivX Certified® to play DivX® and DivX Plus®
HD (H.264/MKV) video up to 1080p HD
including premium content.
DivX®, DivX Certified®, DivX Plus® HD
and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
BONUSVIEW™
'BD LIVETM' and 'BONUSVIEWTM' are
trademarks of Blu-ray Disc Association.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-HD and
the Symbol together are registered trademarks
& DTS-HD Master Audio is a trademark of
DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
'DVD Video' is a trademark of DVD Format/
Logo Licensing Corporation.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
EN
27
Language Code
Abkhazian
Afar
Afrikaans
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
9072
Chuang; Zhuang
9065
Church Slavic; Slavonic 6785
Chuvash
6786
Corsican
6779
Česky
6783
Dansk
6865
Deutsch
6869
Dzongkha
6890
English
6978
Esperanto
6979
Estonian
6984
Euskara
6985
6976
Faroese
7079
Français
7082
Frysk
7089
Fijian
7074
Gaelic; Scottish Gaelic 7168
Gallegan
7176
Georgian
7565
Gikuyu; Kikuyu
7573
Guarani
7178
Gujarati
7185
Hausa
7265
Herero
7290
Hindi
7273
Hiri Motu
7279
Hrwatski
6779
Ido
7379
Interlingua (International)7365
Interlingue
7365
Inuktitut
7385
28
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
7574
7585
7679
7665
7686
7666
7673
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
6785
7982
7977
7983
8073
8065
7065
8076
8084
Pushto
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Shqip
Sindhi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
BDP9700_12_UM_V1.0