Speco Technologies CVC61HRB surveillance camera Instruction manual
Add to my manuals4 Pages
Speco Technologies CVC61HRB is a miniature weatherproof color camera with a 1/3” Sony Super-HAD™ CCD sensor, delivering 540 TV lines of high resolution. Its compact size and vandal-resistant housing make it suitable for discreet surveillance in various indoor and outdoor locations. With its impressive picture quality, IP66 weatherproof rating, and easy installation process, the CVC61HRB is an ideal choice for security monitoring applications.
advertisement
INSTRUCTION
MANUAL
Miniature Weatherproof
Color Camera
CVC61HRB(Black)
CVC61HRW(White)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Rev. 4/20/2012
Precautions
•
•
•
•
•
•
•
To avoid electrical shock, do not open the case of this product.
Only use a regulated DC 12V Power supply to operate this product.
Do not overload electrical outlets or extension cords. This can result in a fire or electrical shock.
Keep this product away from strong magnetic fields.
Do not expose this product in direct sunlight or strong reflected rays.
Refer servicing to qualified personnel only.
Do not change or modify this product. This will void the warranty.
•
Features
1/3” Sony Super-HAD™ CCD
•
•
•
•
•
•
•
•
540 TV Lines Super High Resolution
Compact Size - Only 1.89” In Diameter!
Vandal Resistant Housing
Cast Aluminium Construction
Integrated 3mm Fixed Lens
Impressive Picture Quality
Weatherproof (IP66 Rated)
12V DC Required
Installation
1. Loosen the two locking screws①, using the supplied hex-head wrench and remove the mounting base.
2. Attach the mounting base② to a suitable solid surface, such as a wall or ceiling. On partitioning locate a wall stud or ceiling joist. Secure the mounting base using the supplied screws③. Fit the camera④ to the mounting base ② and fix in to position using the two locking screws①, secure them with the hex-head wrench.
3. How to set the angle of view:
Loosen the two locking screws①, using the supplied hex-head wrench, and set the desired camera angle by moving the camera right /left and up/down.
4. Connect the video connector (BNC) of the camera cable to the incoming video cable. The other end of the video cable should be connected to a DVR or Monitor.
Plug the camera power connector (red DC jack) into the DC12V regulated power supply. Switch on the power supply and the picture will be displayed on a monitor.
1.89” dia
Specifications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Image Sensor
Horizontal Resolution
Sensitivity
Lens
Effective Pixels (H x V)
Electronic Shutter Speed
Scanning System
Synchronization
Frequency
Video Output
S/N Ratio
Gain Control
White Balance
IP Rating
Operating Temperature
Power Supply
Power Consumption
Dimensions
Weight
1/3” Sony Super-HAD™ CCD
540 TV Lines
0.1 Lux
3mm Fixed Lens
768 x 594
Auto: 1/60 ~ 1/120,000 Seconds
2:1 Interlace
Internal
Horizontal: 15.734KHz / Vertical: 60Hz
1.0Vp-p~75 Ohm
>50dB (AGC Off)
Auto
Auto
IP66
-4 ~ +140° F
12V DC Required
120mA Max.
1.89”(Dia) x 1.46”(H)
0.25 lbs.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project