Philips docking speaker with Bluetooth® AD620

Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User Manual
AD620
Contents
1Important
3
2 Your Docking Speaker
3
3 Get started
5
4Play
5
5 Product information
7
6Troubleshooting
8
7Notice
9
Introduction3
What's in the box
3
Overview of the main unit
4
Connect power
Play from iPod/iPhone
Play from Bluetooth device
Play from an external audio device
Adjust volume
Specifications
About Bluetooth device
Disposal of your old product
Bluetooth Statement
5
5
6
7
7
7
8
9
9
EN
2
1Important
•
•
•
•
•
•
•
•
•
•
•
•
•
3
Read these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified
by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted
candles).
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
EN
2 Your Docking
Speaker
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this docking speaker, you can enjoy audio
from the iPod/iPhone, Bluetooth-enabled
devices, and other external audio devices.
What's in the box
Check and identify the contents of your
package:
• Main unit
• AC power adaptor
• Quick start guide
• Safety sheet
Overview of the main unit
a
b
e
c
d
a Dock for the iPod/iPhone
b VOL +/• Adjust volume.
c MP3-LINK
• Connect an external audio device.
d DC IN
• Connect power.
e
• Enable or disable Bluetooth function.
EN
4
3 Get started
Always follow the instructions in this chapter in
sequence.
4Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Connect power
Caution
•• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Note
•• The type plate is located at the back of the docking
speaker.
Connect the power adaptor to:
• the DC IN socket at the back of the
speaker.
• the wall outlet.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod classic
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Listen to the iPod/iPhone
1
2
Place an iPod/iPhone in the dock.
Play audio on the iPod/iPhone.
»» Audio streams from the iPod/iPhone
to the speaker.
DC IN
To remove the iPod/iPhone:
Pull the iPod/iPhone out of the dock.
5
EN
Charge the iPod/iPhone
When the docking speaker is connected to
power, the docked iPod/iPhone begins to
charge automatically.
Play from Bluetooth device
Pair with Bluetooth devices
Note
•• Before you connect a Bluetooth device to this docking
speaker, familiarize yourself with the Bluetooth
capabilities of the device.
•• The effective operational range between the docking
system and the paired device is approximately 10
meters.
•• Any obstacle between the docking speaker and the
paired device can reduce the operational range.
1
2
3
4
AD620
Press to select Bluetooth source.
»» The Bluetooth button blinks.
Turn on Bluetooth function on your device.
• Different devices may have different
way to activate Bluetooth.
Scan Bluetooth devices that can pair with
your device.
When “AD620” is displayed on your
device, select it to start connection.
»» If connection is successful, you will hear
double beep confirmation tone, and
the Bluetooth button stops flashing.
»» A different Bluetooth icon is displayed
on your device.
5
Play audio on your device.
»» Audio streams from your device to the
docking speaker.
Tip
•• If your Bluetooth device has been paired with this
speaker before, you just need to find out “AD620” on
your Bluetooth menu, then confirm the connection.
To disconnect Bluetooth:
• Press on the docking speaker again.
• Deactivate Bluetooth function on your
device; or
• Move the device beyond the
communication range.
EN
6
Play from an external audio
device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
5Product
information
Note
•• Product information is subject to change without prior
Note
notice.
•• Make sure that no iPod/iPhone is docked in the docking
speaker.
1
2
Specifications
Connect an MP3 link cable (not supplied)
to:
• the MP3-LINK socket at the back of
the docking speaker.
• the headphone socket on an external
device.
»» The docking speaker switches to MP3
link mode automatically.
Amplifier
Play music on the device (see the device's
user manual).
Standard
Adjust volume
During play, press VOL +/- to adjust volume.
Total Output Power
Signal to Noise Ratio
MP3 Link
10 W per channel x 2
> 62 dBA
650 mV RMS
Bluetooth
Frequency Band
Range
Bluetooth Standard Version
2.1+EDR
2.402~2.480 GHzISM Band
10m (free space)
General information
AC Power
Model: AS190-100AE180 (Philips);
Input: 100-240 V ~,
50/60Hz, 0.7A;
Output: 10 V 1.8 A
Operation Power
Consumption
15 W
Standby Power
Consumption
<0.5 W
Max. load for iPod/
iPhone
5V 1 A
Dimensions - Main Unit
(W x H x D)
275 x 117 x 121 mm
Weight (Main Unit)
1.2 kg
7
EN
6Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
•• Ensure that the AC power plug of the unit
is connected properly.
•• Ensure that there is power at the AC
outlet. Cannot connect with the system.
•• The device does not support the profiles
required for the system.
•• The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
•• The system is not in the pairing mode.
•• The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired device connects and disconnects
constantly.
•• The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
•• For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
No sound
•• Adjust the volume. No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the unit again. About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
•• The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•• The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
EN
8
7Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
This product complies with the radio
interference requirements of the European
Community.
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
9
EN
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area. Bluetooth Statement
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
AD620_12_UM_V1.0