Plug & Play (Initial Setup)
Getting Started
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the POWER
button. Plug & Play is available only when the Input source is set to
TV.
Accessories
LED TV
user manual
• Remote Control (AA59-00666A) &
Batteries (AAA x 2)
• Owner’s Instructions
• Warranty Card / Safety Guide
• Power Cord
• Component
• Composite (AV)
Cable
Still image warning
Important Warranty Information Regarding
Television Format Viewing
✎✎ See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height)
are primarily designed to view wide screen format full-motion video. The images
displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded
to fill the screen if your model offers this feature and the images are constantly moving.
Displaying stationary graphics and images on screen, such as the dark sidebars on
non- expanded standard format television video and programming, should be limited
to no more than 5% of the total television viewing per week. Additionally, viewing other
stationary images and text such as stock market reports, video game displays, station
logos, web sites or computer graphics and patterns, should be limited as described
above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LED Displays that leave subtle, but permanent burned-in
ghost images in the LED picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On LED
models that offer picture sizing features, use these controls to view different formats as
a full screen picture. Be careful in the selection and duration of television formats you
use for viewing. Uneven LED aging as a result of format selection and use, as well as
burned-in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original
Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the
requirements, conditions, exclusions and limitations contained herein, SAMSUNG
will additionally provide Warranty Repair Service in the United States on SAMSUNG
products purchased in Canada, and in Canada on SAMSUNG products purchased
in the United States, for the warranty period originally specified, and to the Original
Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized
Service Center. Along with this Statement, the Original Limited Warranty Statement
and a dated Bill of Sale as Proof of Purchase must be presented to the Service
Center. Transportation to and from the Service Center is the responsibility of the
purchaser. Conditions covered are limited only to manufacturing defects in material or
workmanship, and only those encountered in normal use of the product. Excluded, but
not limited to, are any originally specified provisions for, in-home or on-site services,
minimum or maximum repair times, exchanges or replacements, accessories, options,
upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
–– In Canada : 1-800-SAMSUNG
Avoid displaying still images (such as jpeg picture files) or still image elements (such as
TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom
etc.) on the screen. Constant displaying of still pictures can cause ghosting of LED
screen, which will affect image quality. To reduce risk of this effect, please follow below
recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image on full screen, use TV set picture format menu for
best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
English
Español
Français

Language
Do not plug cable upside down.
Be sure to check before plug-in.
TV Controller (Panel Key)
Select ‘Home Use’ when installing this TV in your home.
Function menu
Store Demo
MEDIA.P
m
Home Use
R
s
P
with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a wall-mount.
4inches
4inches
4inches
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung
products, please contact the SAMSUNG customer care center.
Country
CANADA
U.S.A
Address
Samsung Electronics
Canada Inc., Customer
Service 55 Standish
Court Mississauga,
Ontario L5R 4B2
Canada
Samsung Electronics
America, Inc.
85 Challenger Road
Ridgefield Park, NJ
07660-2112
Customer Care
Center 
1-800-SAMSUNG(726-7864)
Web Site
www.samsung.com

In Cable mode, you can select the correct
signal source among STD, HRC, and IRC
by pressing the ▲, ▼, ◄ or ► button.
Plug & Play
Select the Antenna source to memorize.
Remote control sensor
TV Controller
TV Controller
Power on
Adjusts the volume by moving the controller from side
to side when the power is on.
Selecting a channel
Selects a channel by moving the controller up and
down when the power is on.
Using the function
menu
Press the controller when the power is on, then the
function menu screen appears. If you press it again,
the function menu screen disappears.
Selecting the Media
Play
Selects the MEDIA.P by moving the controller in
the function menu screen. The Media Play main
screen appears.
Selecting the MENU
(m)
Selects the MENU(m) by moving the controller in the
function menu screen. The OSD(On Screen Display)
of your TV’s feature appears.
Selecting the Source
List (s)
Selects the Source List(s) by moving the
controller in the function menu screen. The Source
List screen appears.
Power Off (P)
Selects the Power Off (P) to turn the TV off by
moving the controller in the function menu screen.
Air
Start
Cable
Start
Auto
Start
U Move
ANT OUT
E Enter
PC


Media Play
G
R
Y
Setting the Clock Mode


E Enter
m Skip
B
PB

Enjoy your TV.


Press the ENTERE button.
Channel Menu
Add, delete or set Favorite channels and use the program guide for
digital broadcasts. Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by pressing the ▲ / ▼
buttons, and pressing the ENTERE button. Then you can watch
the selected channel.
Added Channels
Air 7-1 ♥ TV #7
Change the channel mode directly between Added Channels and
Favorite Channels.
3. Press the ENTERE button.
Channel List
Air
♥ TV #6
Channel Mode
2. A message will ask Stop Auto Program? Select Yes by pressing
the ◄ or ► button.
❑❑ Seeing Channels
6
6-1 ❑❑ Other Features
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
✎✎ Press the ENTERE button to stop the Clear Scrambled
Channel.
✎✎ This function is only available in Cable mode.
8
Air
9
Air
9-1
♥ TV #9
10
Air
10-1
♥ TV #10
11-1
♥ TV #11
' Zoom ' Select T Tools ► Next Program
Channel List
Channel List Option Menu t
■■ All Channels: Shows all currently available channels.
■■ Added Channels: Shows all added channels.
■■* Favorite: Shows all favorite channels.
■■ Programmed: Shows all currently reserved programs.
✎✎ Using the remote control buttons with the Channel List
xxGreen (Zoom): Enlarges or shrinks a channel number.
xxYellow (Select): Selects multiple channel lists. Select desired
menu in the same manner.
menus may differ depending on the situation.)
Channel Status Display icons
Operations
c
A channel selected.
*
A channel set as a favorite.
■■Add to Favorite / Delete from Favorite t: Set channels
you watch frequently as Favorites.
■■Timer Viewing: You can set a desired channel to be displayed
automatically at the set time; even when you are watching another
channel. Set the current time first to use this function.
✎✎ Only memorized channels can be reserved.
✎✎ Reserved programs will be displayed in the Programmed
menu.
A reserved program.
(
✎✎ When a digital channel is selected, press the ► (Next
Program) button to view the digital program. If you select
the ENTERE(Schedule) button on the next program, you
can set Timer Viewing directly.
A program currently being broadcast.
❑❑ Memorizing channels
Antenna (Air / Cable) t
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the
TV (i.e. an Air or a Cable system).
Auto Program
✎✎ When selecting the Cable TV system: Selects the cable
■■Channel Name Edit (analog channels only): Assign your own
channel name.
■■Select All: Select all the channels in the channel list.
■■Deselect All: Deselect all the selected channels.
✎✎ You can only select Deselect All when one or more
channels are selected.
■■Auto Program: Scans for a channel automatically and stores in
the TV.
Programmed
system. STD, HRC and IRC identify various types of cable TV (in Channel List)
systems. Contact your local cable company to identify the type
of cable system that exists in your particular area. At this point, You can view, modify or delete a show you have reserved to watch.
■■Change Info: Change a show you have reserved to watch.
the signal source has been selected.
■■Cancel Schedules: Cancel a show you have reserved to watch.
✎✎ After all the available channels are stored, it starts to
■■Information: Display a show you have reserved to watch. (You
remove scrambled channels. The Auto program menu then
can also change the reservation Information.)
reappears.
✎✎ Press the ENTERE button to stop the channel store during ■■Select All / Deselect All: You can select or deselect all channels
in the channel list.
Auto Program.
-5-
[UE4003-ZC]BN68-04466A-ENG.indd 1
■■Size: Your cable box/satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use
16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire
screen.
4:3: Sets the picture to basic (4:3) mode.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and center of the screen may
cause image retention (screen burn) which are not covered
by the warranty.
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as
this is done automatically during the search and store operation. If
the signal is weak or distorted, fine tune the channel manually.
✎✎ Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the
channel banner.
✎✎ To reset the fine-tuning, select Reset.
Picture Menu
✎✎ When connecting a PC, you can only select Entertain and
✎✎ The Add menu only appears for deleted channels.
✎✎ Delete a channel from the Added Channels or Favorite
xxT (Tools): Displays the Channel List option menu. (The Options
Fine Tune
■■Add / Delete: Delete or add a channel to display the channels
you want.
✎✎ All deleted channels will be shown on the All Channels
menu.
deleted.
Color Tone, Size and HDMI Black Level.
■■Color Tone (Cool / Standard / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Favorite.
Mode t
✎✎ A gray-colored channel indicates the channel has been
Picture Options
✎✎ When connecting a PC, you can only make changes to the
✎✎ The Favorite Channels is enabled only when you set Add to
Set each channel using the Channel List menu options. Option
menu items may differ depending on the channel status.
channels and press the Yellow button to set all the selected
channels at the same time. The c mark appears to the left of
the selected channels.
Icons
to UN32EH4003 / UN39EH5003 according to
connection numbers.
-2-
1. Press the ENTERE button.
Screen Fit (DTV): Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)
signals are inputted.
✎✎ HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p
(1280x720)
Select your preferred picture type.
Standard.
✎✎ Settings can be adjusted and stored for each external device
■■Dynamic: Suitable for a bright room.
■■Standard: Suitable for a normal environment.
■■Movie: Suitable for watching movies in a dark room.
■■Entertain: Suitable for watching movies and games.
✎✎ Only available when connecting a PC.
you have connected to an input on the TV.
✎✎ Picture Sizes available by Input Source:
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
Your television has several setting options for picture quality control.
✎✎ When connecting a PC, you can only make changes to
Input Source
Picture Size
ATV, AV, Component (480i,
480p)
16:9, Zoom1, Zoom2, 4:3
DTV(1080i, 1080p),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, Wide Fit, 4:3, Screen
Fit
■■Digital Noise Filter (Off / Low / Medium / High / Auto): If the
broadcast signal received by your TV is weak, you can activate
the Digital Noise Filter feature to reduce any static and ghosting
that may appear on the screen.
Backlight, Contrast, Brightness and Sharpness
Advanced Settings
(available in Standard / Movie mode)
✎✎ When the signal is weak, try other options until the best
Compared to previous models, new Samsung TVs have a more
precise picture.
picture is displayed.
✎✎ When connecting a PC, you can only make changes to
Gamma and White Balance.
■■Color Space (Auto / Native): Adjusts the range of colors
available to create the image.
■■White Balance: Adjusts the color temperature for a more natural
picture.
R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green,
blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)
brightness.
Reset: Resets the White Balance to it’s default settings.
■■Gamma: Adjusts the primary color intensity.
■■Dynamic Contrast (Off / Low / Medium / High): Adjusts the
screen contrast.
■■Black Tone (Off / Dark / Darker / Darkest): Select the black level
to adjust the screen depth.
■■Flesh Tone: Emphasize pink “flesh tone”.
■■Motion Lighting (Off / On): Reduce power consumption by
brightness control adapted motion.
✎✎ Available in Standard mode only.
■■HDMI Black Level (Normal / Low): Selects the black level on the
screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■Film Mode (Off / Auto): Sets the TV to automatically sense and
process film signals from all sources and adjusts the picture for
optimum quality.
✎✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i).
■■LED Motion Plus (Off / On): Removes drag from fast scenes with
a lot of movement to provide a clear picture.
Picture Reset
Resets your current picture mode to its default settings.
■■Reset Picture Mode: Returns all picture values in the currently
selected mode to the default settings.
-6-
R
R
W
R
W
Y
VIDEO OUT
AUDIO OUT
AUDIO OUT
Turns the TV on and off.
Displays and selects the available video sources.
Press to directly access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to
select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.
Returns to the previous channel.
Cuts off the sound temporarily.
R-AUDIO-L
R-AUDIO-L
PR
R
Adjusts the volume.
AV Device (3)
Using an Audio/Video
Cables
yy The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the TV. If
such a problem occurs, ask the manufacturer of the external device about the HDMI
version and, if out of date, request an upgrade.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display
or a connection error may occur.
Changes channels.
Displays the channel list on the screen.
VCR
yy DIGITAL AUDIO OUT(OPTICAL) is not supported.

right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
How to Stop Auto Programming
Information
Displays the main on-screen menu.
MEDIA.P
SLEEP
Automatically shuts off the TV at a preset time.
Quickly select frequently used functions.
Displays information on the TV screen.
Selects the on-screen menu items and changes the
values seen on the menu.
Returns to the previous menu.
Exit the menu.
Use these buttons according to the direction on screen.
P.SIZE: Lets you choose the picture size.
MTS: Press to choose stereo, mono or Separate Audio
Program (SAP broadcast).
CC: Controls the caption decoder.
Use these buttons in a specific feature.
yy PC/DVI AUDIO IN input are not supported.

✎✎ When selecting the function by moving the controller to the up/down/left/
-1-
W
Using an HDMI Cable or
an HDMI to DVI Cable.
Use the PC speakers for
audio.
yy For better picture and audio quality, connect to a digital device using an HDMI
cable.

HDMI / DVI IN port with HDMI to DVI cable, you should set the
TV to DVI mode under Edit Name.
Remote Control
✎✎ Note
✎✎ For UN22ES4003 connection, you can refer
BN68-04466A
R
Y
R
Blu-ray player
The connection method for the best HD screen quality is displayed.
✎✎ When connecting an AV devices to the HDMI IN 1(DVI) or
You can see detailed information about the connected external
device.
Views the Media Play.
UN22ES4003
IN port with HDMI to DVI cable, you should set the TV to DVI
PC mode under Edit Name.
■■TV / AV / Component / HDMI/DVI
✎✎ You can only choose external devices that are connected
to the TV. In the Source List, connected inputs will be
highlighted.
Power Input
Viewing the HD Connection Guide
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04466A-00
W
Using a Component Cable
(up to 1080p)

✎✎ Exits the menu when pressing the controller more than 1 second.
R
AV Device (2)
Set the Clock Mode automatically or
manually.
: Auto
B
COMPONENT OUT

Clock Mode
✎✎ When connecting a PC to the HDMI IN 1(DVI) or HDMI / DVI
UN22ES4003
PC
TV Rear Panel
m Skip
• If you select the Auto, set the
DST(Daylight Saving Time).
• On the DST screen, press ENTERE,
then select whether to turn DST
(Daylight Savings Time) on or off. Select
the time zone where you live.
UN32EH4003 / UN39EH5003
■■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
/ Blu-ray / HD DVD / DMA: Name the device connected to the
input jacks to make your input source selection easier.
✎✎ When connecting a PC to the HDMI IN 1(DVI) or HDMI / DVI
IN port with HDMI cable, you should set the TV to PC mode
under Edit Name.
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Using a USB Drive
G
Set the Clock Mode.
2. Select a desired external input source.
DVI OUT

Cable

Plug & Play
HDMI OUT


or


Turns the TV on by pressing the controller in standby
mode.
Adjusting the volume
4inches
4inches
E Enter


UN32EH4003 / UN39EH5003
• Select the Home Use mode. Store
Demo mode is for retail environments.
• When pressing TV controller, the
function menu screen appears. Select
the MENU(m) and press it more than 5
seconds using the controller. The Store
Demo mode is set. Cancel the Store
Demo by selecting Source List(s)
and pressing it more than 5 seconds.
Selecting an antenna
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics
only.
xxIf you use parts provided by another manufacturer, it may result in a problem
4inches

L Move
Return
Keep the required distances between the product and other objects (e.g. walls) to
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the
internal temperature of the product.
4inches
Blu-ray player / DVD / cable
box / sat box

Plug & Play
Securing the Installation Space
Installation with a stand.

Selecting a Home Use mode
1. Press the SOURCE button.
■■TV / AV / Component / HDMI1/DVI / HDMI2
E Enter

USB
HDMI OUT
VHF/UHF Antenna
U Move
Ports
UN22ES4003
Using an HDMI Cable (up
to 1080p)
UN32EH4003 / UN39EH5003
Select the desired OSD (On Screen
Display) language.
R
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
AV Device (1)
Plug & Play
✎✎ Check the cable before plug-in
HDMI
Use to select TV or an external input source such as a DVD player /
Blu-ray player / cable box / STB satellite receiver.
Power Input
Selecting a language
Select Language of the OSD.
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. The
following selections appear under Edit Name:
Source List
‘Connections’)
• Coaxial (RF)
How to use Edit Name
Changing the Input Source
TV Rear Panel
✎✎ Connecting the power cord and antenna. (refer to
• Wire-Holder Stand (BN61-05491A)
Input Cables (Sold Separately)
• HDMI
• HDMI-DVI
Connections
yy Connecting through the HDMI cable may not be supported depending on the PC.
Avoid use when nearby fluorescent lights or neon signs.
xxThe Color and shape may vary depending on the model.
yy SERVICE: Connector for service only.
-3-
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
■■Amplify: Increase the intensity of high-frequency sounds to allow a
better listening experience for the hearing impaired.
Equalizer
(standard sound mode only)
SRS TruSurround HD
(standard sound mode only)
SRS TruSurround HD is a patented SRS technology that solves the
problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal
television speakers. It is fully compatible with all multichannel formats.
(digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of
many audio tracks (for example, simultaneous translations of the
program into foreign languages).
✎✎ You can only select a language from among the ones being
broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
■■Mono: Choose for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
■■Stereo: Choose for channels that are broadcasting in stereo.
■■SAP: Choose to listen to the Separate Audio Program, which is
usually a foreign-language translation.
✎✎ Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Auto Volume
Because each broadcasting station has its own signal conditions,
the volume may fluctuate each time channel is changed. This feature
lets you automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
❑❑ Setting the Time
Time
✎✎ The current time will appear every time you press the INFO
button.
■■Clock: Setting the clock is for using various timer features of the
TV.
✎✎ If you disconnect the power cord, you have to set the clock
again.
Clock Mode: Set the current time manually or automatically.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎✎ Available only when Clock Mode is set to Manual.
■■Balance L/R: Adjusts the balance between the right and left
speaker.
■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■Reset: Resets the equalizer to its default settings.
Preferred Language
-4-
Setup Menu
Mode t
■■Reset All: Resets all sound settings to the factory defaults.
✎✎ NOTE
xxUse the remote control within 23 feet from TV.
xxBright light may affect the performance of the remote control.
yy If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) or HDMI / DVI IN port,
the audio does not work.
Sound Menu
Sound Reset
Installing batteries (Battery size: AAA)
yy For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) or HDMI / DVI
IN jack.
Time Zone: Select your time zone.
DST (Daylight Saving Time): Switches the DST (Daylight Saving
Time) function on or off.
✎✎ DST and Time Zone function is only available when the
Clock Mode is set to Auto.
■■Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
✎✎ To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the
clock first.
■■On Time / Off Time: Set the hour, minute, am/pm and Activate /
Inactivate. (To activate the timer with the setting you have chosen,
set to Activate.)
■■Volume: Set the desired volume level.
■■Contents: When the On Time is activated, you can turn on a
specific channel or play back contents such as photo or audio files.
-- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
-- Antenna: Displays the current antenna source.
-- Channel: Select the desired channel.
-- Music/Photo: Select the folder containing MP3/JPEG files on
the USB device.
✎✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
✎✎ The media may not be playing smoothly when using the
device lower than USB 2.0.
■■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at you convenience. If you select Manual, you can
set up the day you want to activate the timer.
❑❑ Other Features
Program Rating Lock
The Program Rating Lock feature automatically locks out programs
that are deemed inappropriate for children. The user must enter a
PIN (personal identification number) before any of the Program Rating
Lock restrictions are set up or changed.
✎✎ Program Rating Lock is not available in HDMI or Component
mode.
■■Program Rating Lock: You can block rated TV Programs.
■■TV Parental Guidelines: You can block TV programs depending
on their rating. This function allows you to control what your
children are watching.
■■MPAA Rating: You can block movies depending on their MPAA
rating. The Motion Picture Association of America(MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
■■Canadian English: You can block TV programs depending on
their Anglophone Canadian.
■■Canadian French: You can block TV programs depending on
their French Canadian rating.
■■Downloadable U.S. Rating: Parental restriction information can
be used while watching DTV channels.
■■Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter it in Enter New PIN. Re-enter
the same 4 digits in Confirm New PIN. When the Change PIN
screen disappears, press the OK button. The TV has memorized
your new PIN.
✎✎ If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to “0-0-0-0” :
POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)
■■Digital Caption Options: (digital channels only)
Size: Options include Default, Small, Standard and Large. The
default is Standard.
Font Style: Options include Default and Styles 0 to 7. The
default is Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options
include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent,
Solid and Flashing.
Return to Default: This option sets each Size, Font Style,
Foreground Color, Background Color, Foreground Opacity and
Background Opacity to its default.
✎✎ Digital Caption Options are available only when Default
and Service1 ~ Service6 can be selected in Caption
Mode.
✎✎ The Foreground and Background cannot be set to have the
same color.
Language
Set the menu language.
✎✎ Choose between English, Español and Français.
Game Mode
When connecting to a game console such as PlayStation™ or
Xbox™, you can enjoy a more realistic gaming experience by
selecting the game menu.
Melody
Set so that a melody plays when the TV is turned on or off.
✎✎ The Melody does not play.
xxWhen no sound is output from the TV because the MUTE
button has been pressed.
xxWhen no sound is output from the TV because the volume has
been reduced to minimum with the VOL – button.
✎✎ Precautions and limitations for game mode
xxTo disconnect the game console and connect another external
xxWhen the TV is turned off by Sleep Timer function.
device, set Game Mode to Off in the setup menu.
Auto Protection Time
slightly.
■■Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idle with a still image for a certain
period of time defined by the user, the screen saver is activated
to prevent the formation of ghost images on the screen.
xxIf you display the TV menu in Game Mode, the screen shakes
✎✎ Game Mode is not available when the input source is set to
TV.
✎✎ After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
Caption
(On-Screen Text Messages)
■■Caption: You can switch the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
✎✎ The Caption feature does not work in Component or
HDMI mode.
■■Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode or when a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4:
(digital channels only) The Digital Captions function works with
digital channels.
✎✎ Service1~6 may not be available in digital caption mode
depending on the broadcast.
Eco Solution
■■Energy Saving (Off / Low / Medium / High / Picture Off) :
This adjust the brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is turned
off, but the sound remains on. Press any button except volume
button to turn on the screen.
■■No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
✎✎ Disabled when the PC is in power saving mode.
■■Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
✎✎ The default PIN number of a new TV set is “0-0-0-0”.
-7-
-8-
2012-05-21 �� 9:41:47
2. Press the ▲ or ▼ button to select Media Play (USB), then press
the ENTERE button.
Support Menu
Videos
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), then press the ENTERE button.
Self Diagnosis
■■Picture Test: Use to check for picture problems. If the problem
continues to occur, check the color pattern.
■■Sound Test: Use the built-in melody sound to check for sound
problems.
■■Signal Strength: (digital channels only) An HD channel’s reception
quality is either perfect or the channels are unavailable. Adjust
your antenna to increase signal strength.
■■Reset: Reset all settings to the factory defaults.
✎✎ The PIN input screen appears before the setup screen.
File
Container Video Codec
Extension
►
Movie 01.avi
*.asf
*.wmv
xxMedia Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Flash Card Readers. Devices
should be connected directly to the TV’s USB port. USB HDD is
not supported.
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
Software Upgrade
xxA USB device that requires high power (more than 0.5A) may not
be supported.
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
xxDo not disconnect the USB device while it is loading.
xxThe higher the resolution of the image, the longer it takes to
display on the screen.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
xxThe maximum supported JPEG resolution is 15,360 x 8,704
pixels.
xxIf a file is corrupted or the TV does not support the file type, the
Contact Samsung
“Not Supported File Format” message appears.
xxThe TV cannot play MP3 files with DRM that have been
View this information when your TV does not work properly
or
POWER
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billings and settlements.
P
E Pause L Jump T Tools R Return
2. Press the ◄/►/▲/▼ button to select the desired video in the file
list.
3. When USB is connected to the TV, you can select Media Play
(USB) in Application menu.
you cannot play the game itself.
--
xxThe maximum displayed number of files, including sub folders, in
Name
File extension
MPEG-4 timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
.sub or .txt
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
--
Name
Container
Format
Xsub
AVI
Picture Format
SubStation Alpha
MKV
Text Format
Advanced SubStation Alpha
MKV
Text Format
SubRip
MKV
Text Format
MPEG-4 Timed text
MP4
Text Format
30Mbps
H. 264 BP / MP
1920x1080
/ HP
6~30
30Mbps
MPEG1
1920x1080
24/25/30
30Mbps
MPEG2
1920x1080
24/25/30
30Mbps
H. 264 BP / MP
1920x1080
/ HP
6~30
30Mbps
MPEG4 SP
/ ASP
1920x1080
6~30
30Mbps
H.264
1920x1080
6~30
30Mbps
H.264
1920x1080
6~30
30Mbps
Sorenson H.263 1920x1080
6~30
30Mbps
AC3 /
AAC /
MP3 /
DD+ /
HE-AAC
AC3 /
MPEG /
LPCM /
AAC
File
Container Video Codec
Extension
DivX
1920x1080
3.11/4.x/5.1/6.0
*.mp4
MP4
*.avi
*.mkv
AVI,
MKV
R Return
Frame
rate(fps)
6~30
Bit
rate(Mbps)
1920x1080
6~30
30Mbps
AVC
1920x1080
6~30
30Mbps
MJPEG
640x480
6~30
10Mbps
DivX
1920x1080
3.11/4.x/5.1/6.0
6~30
30Mbps
MPEG4 SP
/ ASP
1920x1080
6~30
30Mbps
H264
1920x1080
6~30
30Mbps
MJPEG
640x480
6~30
10Mbps
xxDo not use screws that do not comply with the VESA standard
Kensington Lock
xxDo not use screws that are longer than the standard dimension
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
xxFor wall mounts that do not comply with the VESA standard
✎✎ Please find a “K” icon on the rear of the TV. The Kensington
button.
✎✎ � (REW) and μ (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 and PCM file extension. Other
MP3 /
ADPCM /
AAC
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
Music 1
file extensions are not displayed, even if they are saved on the
same USB device.
You can move the other file
directly.
c
Repeat Mode
You can play movie and music
files repeatedly.
c
Picture Size
You can adjust the picture size to
your preference.
c
Picture Mode
You can adjust the picture
setting.
c
Sound Mode
You can adjust the sound
setting.
c
Subtile Setting
You can play the video with
Subtitles. This function only
works if the subtitles are the
same file name as the video.
c
Audio Language
You can change the audio
language if the video has more
than one language.
c
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
Stop Slide Show /
Start Slide Show
You can start or stop a Slide
Show.
c
2. Press the ◄/►/▲/▼ button to select the desired photo in the file
list.
Slide Show Speed
You can select the slide show
speed during the slide show.
c
3. Press the ENTERE button or � (Play) button.
Background Music
You can set and select
background music when
watching a Slide Show.
c
Zoom
You can zoom into images in full
screen mode.
c
Rotate
You can rotate images in full
screen mode.
c
Information
You can see detailed information
about the played file.
Photos
Image1024.jpg
1024x768
2011/10/24
3/15
E Pause L Previous/Next T Tools R Return
✎✎ NOTE
xxWhile a photo list is displayed, press the � (Play) / ENTERE
button on the remote control to start the slide show.
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using
(π) (REW) or (µ) (FF) button.
yy Supported Photo Formats
Music 5
No Singer
SUM
E Pause L Jump T Tools R Return
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
Music
Photos
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
c
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
c
c
c
c
c
JPEG
Photo
Resolution
Base-line
15360 x 8704
Progressive
1024 x 768
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways have two people mount the TV on a wall.
Other Information
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
■■Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
Deselect All.
Wall Mount Kit Specifications (VESA)
✎✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest
dealer. If you install the TV on a ceiling or slanted wall, it may fall and
result in severe personal injury.
3. Press the TOOLS button, and then select Play Selected
Contents.
- 10 -
For detailed information on installing the wall mount, see the
instructions provided with the wall mount items. Contact a technician
for assistance when installing the wall mount bracket. Samsung
Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the wall mount on your own.
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
19~22
75 X 75
26
100 X 100
32~40
200 X 200
M6
46~60
400 X 400
M8
LED-TV
- 11 -
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1
on the TV.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It
may take up to 20 minutes)
• Set output resolution of the cable box to 1080i or 720p.
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
• This function is only available for digital channels from an Antenna / RF/Coax connection.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
Model Name
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when you select the TV source.
Display Resolution
Unwanted Powering off
There is no sound or the sound is too
low at maximum volume.
• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select
TV mode, go to MENU → Setup → Plug & Play → ENTERE.
The picture is good but there is no
sound.
• If you are using an external device, check the device’s audio output option (ex. you may need to change your
cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• Reboot the connected device by reconnecting the device’s power cable.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
The speakers are making an
inappropriate noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen.
• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
No Picture, No Video
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with
the TV still on but, turns it off after a certain period of time so as not to waste energy.
The TV will not turn on.
yy Sleep Timer : User Menu → Setup → Time → Sleep Timer
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
There is no picture/video.
• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
• Reboot the connected device by reconnecting the device’s power cable.
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
yy No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
yy Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
Trouble Powering On
Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote
and it will blink about 5 times before turning on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check
before making a call to the service department.
yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite
box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly
• If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.
Cannot find channel
• Re-run plug and play.
Poor picture
First, perform the Picture Test and to see if your TV is properly displaying the test image.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as
it did in the store.
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after performing Auto program.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted: macroblock
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports
and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to view the default picture setting. (go to MENU - Picture - Picture Reset)
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
No Caption on digital channels.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
• Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set
in the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
• Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.
• Some channels may not have caption data.
• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports
and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
pixels on the screen. These pixels will have no impact on the performance of the product.
✎✎ Watch these troubleshooting on video at www.samsung.com/spsn.
✎✎ Some functions and pictures shown in this manual are available on specific models only.
✎✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
Storage and Maintenance
✎✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the settop-box has a grounding issue. Replace the Component video cables with an HDMI connection.
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
• Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work.
• Replace the remote control batteries with correct polarity (+/–).
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
UN22ES4003
UN32EH4003
Dimensions (W x H x D)
Body
symbol are trademarks of SRS Labs, Inc.
SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in
speakers, while maintaining steady volume and delivering rich bass and clear dialog.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.
request@samsung.com).
■ This product uses some software programs which are distributed under the Independent JPEG
Group.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so, provided that the above
copyright notice(s) and this permission notice appear in all copies of the Software and that both the
above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT
SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR
ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks & DTS
2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS,
Inc. All Rights Reserved.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to
resolution settings in this manual.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software without prior written authorization
of the copyright holder.
UN39EH5003
3W x 2
5W x 2
10W x 2
20.4 X 12.5 X 1.9 inches
(518.9 X 319.7 X 49.0 (mm))
20.4 X 13.9 X 4.8 inches
(518.9 X 354.1 X 123.4 (mm))
29.0 X 17.4 X 3.6 inches
(738.4 X 444.0 X 93.2 (mm))
29.0 X 19.5 X 7.5 inches
(738.4 X 497.7 X 191.7 (mm))
35.2 X 20.9 X 3.6 inches
(895.9 X 532.5 X 93.2 (mm))
35.2 X 23.2 X 8.9 inches
(895.9 X 589.3 X 227.6 (mm))
7.0 Ibs (3.2 kg)
7.2 Ibs (3.3 kg)
11.9 Ibs (5.4 kg)
13.2 Ibs (6.0 kg)
17.1 Ibs (7.8 kg)
21.6 Ibs (9.8 kg)
UN22ES4003
1
1
2
2
1
2
3
4
5
6
7
3
3
4
4
5
5
UN32EH4003 / UN39EH5003
1
1
UN32EH4003
2
2
3
3
4
4
5
5
1
2
3
4
5
6
7
7
7
6
6
UN39EH5003
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to
change without prior notice. Refer to the dimensions prior to performing installation of
your TV. Not responsible for typographical or printed errors.
© 2012 Samsung Electronics America, Inc
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
- 15 -
c
1920 x 1080
UN22ES4003
Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
the SAMSUNG TV code.
c
■■JACK PANEL DETAIL / REAR VIEW
COPYRIGHT AND PERMISSION NOTICE
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
c
c
c
c
c
c
c
c
c
✎✎ Design and specifications are subject to change without prior notice.
✎✎ This device is a Class B digital apparatus.
✎✎ For information about the power required and more about power consumption, refer to the label attached to the product.
✎✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.
ICU License - ICU 1.8.1 and later
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more
information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go
to vod. divx.com for more information on how to complete your registration. Covered by one or more of
the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and
associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
39" Class
(38.5" measured diagonally)
Weight
Without Stand
With Stand
License
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
1920 x
1080
c
c
c
c
32" Class
(31.5" measured diagonally)
Sound
Output
7
7
6
6
TheaterSound, SRS and the
1366 x
768
22" Class
(21.5" measured diagonally)
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.
com) Open Source License Notice is written only English.
[UE4003-ZC]BN68-04466A-ENG.indd 2
+/-/+
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
1366 x 768
Screen Size
(Diagonal)
Clean the product with a soft cloth dampened
with in a small amount of water. Do not use a
flammable liquid (e.g. benzene, thinners) or a
cleaning agent.
Do not spray water directly onto the product.
Any liquid that goes into the product may
cause a failure, fire, or electric shock.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
- 14-
25.175
28.322
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
Open Source License Notice
- 13 -
70.086
70.087
66.667
74.551
75.062
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
scratches.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
Others
31.469
31.469
35.000
49.726
68.681
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
Specifications
With stand
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark
Antenna(Air / Cable) Connection
The TV is not receiving all channels.
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
- 12 -
The picture is black and white.
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
you should check before calling for a repair.
yy Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to “Picture” on user Menu then try
adjusting options mentioned above.
Sync
Polarity
(H / V)
the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.
• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
Screen Brightness
Pixel Clock
Frequency
(MHz)
✎✎ Verify all connections are properly secured. Periodically check
Possible Solution
yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the
video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
VESA DMT
Vertical
Frequency
(Hz)
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
Caption on the TV menu is greyed out.
yy Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
MAC
Horizontal
Frequency
(KHz)
2. Remove the screws from the back center of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
Problem
yy If the test is ok, try making sure ;
IBM
Resolution
supplied, please purchase these additionally.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.
If you find that the color on your Samsung television’s screen is not correct or black and White, first run a Self
Diagnosis on the TV to make sure there are no device issues.
yy Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
Mode
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
Possible Solution
Component Connections /
Screen Color
Optimal resolution
4003 series:1366 x 768@60Hz / 5003 series: 1920 x 1080@60Hz
✎✎ Since the necessary clamps, screws, and string are not
There is a dotted line on the edge of
the screen.
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn
these features off or on.
yy Energy saving : User Menu → Setup → Eco Solution → Energy Saving
4
To prevent the TV from falling
Problem
Flickering and Dimming
Display Modes (HDMI/DVI Input)
M4
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit
samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Possible Solution
Quantity
Securing the TV to the Wall
Troubleshooting
Problem
Standard
Screw
Do not install your Wall Mount Kit while
your TV is turned on. It may result in
personal injury due to electric shock.
■■Information: Select to view information on the connected device.
Other Restrictions
Assembling the Wire Holder stand
xxSamsung is not liable for product damage or personal injury
Product
Family
c
slot is beside the “K” icon.
✎✎ The position and color may differ depending on the model.
xxDo not fasten the screws too firmly. This may damage the
Using the Setup Menu
✎✎ NOTE
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select
No Singer
Videos
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
Settings
xxYou can move to other file using ◄ or ► button.
2. Repeat the above operation to select multiple files.
Music 4
screw specifications.
Operation
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
wall are equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
manual and all parts necessary for assembly are provided.
Title
Music 3
No Singer
below.
Category
✎✎ If the sound is abnormal when playing MP3 files, adjust the
Music 2
No Singer
01:10 / 04:02
1. While a file list is displayed, move to any file in desired group.
■■Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
Playing Multiple Files
3/15
1. Press the MENU button. Press the ▲ or ▼ button to select
Application, then press the ENTERE button.
-9-
Media Play - Additional Functions
✎✎ During music playback, you can search using the ◄ and ►
yy CMYK, YCCK Color space JPEG are not supported.
Playlist
MP3 /
AC3 /
LPCM /
ADPCM /
DTS Core
xxWhen purchasing our wall mount kit, a detailed installation
Image
Audio
Codec
30Mbps
H264
2. Press the TOOLS button, and then select Play Folder.
yy Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
Music
Resolution
3. Press the ENTERE button or � (Play) button.
MP3
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode
of WMA Pro is not supported)
WMA Lossless is not supported.
✎✎ Install the TV close to the wall so that it does not fall.
✎✎ It is safe to connect the string so that the clamps fixed on the
■■Playing the video/music/photo file group
Normal
Audio Decoder
✎✎ NOTE
xxStandard dimensions for wall mount kits are shown in the table
2. Press the ◄/►/▲/▼ button to select the desired Music in the file
list.
MP3
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
yy Supported Video Formats
xxThe media may not be playing smoothly when using the device
E Enter
6~30
yy Video content can not be played, if there are many contents in one file.
Internal
lower than USB 2.0.
▒ Change Device
1920x1080
Video Decoder
Micro DVD
one folder of USB storage device is 2000.
Videos
MPEG2
yy The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
External
is approximately over 4000, the files and folders may not appear
and some folders may not be opened.
Media Play
30Mbps
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy Supported Subtitle Formats
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
xxIf the number of files and folders saved on a USB storage device
30Mbps
6~30
yy Video content will not play, or not play correctly, if there is an error in the
content or the container.
xxIf a file you deleted from the PC is still found when you run Media
the Videos.
❑❑ Using the Media Play Menu
6~30
1920x1080
MP3 /
AC3 /
LPCM /
ADPCM
/ WMA
/ WMA
Pro
During video playback, you can search using the ◄ and ►
button.
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
xxPhotos only supports sequential jpeg format.
xxThe scene search and thumbnail functions are not supported in
1920x1080
H.264
30Mbps
--
✎✎ In this mode, you can play movie clips contained in a game, but
flash
formats
MPEG4 SP
/ ASP
6~30
Other Restrictions
xxIf a USB device connected to the TV is not recognized, the list of
2. Connect a USB device containing photo, music and/or movie files
to the USB jack on the side of the TV.
3GPP
1920x1080
If video time information is unknown, playing time and the
progress bar are not displayed.
USB device or may not be able to read the files on the device.
1. Turn on your TV.
PS
DivX 3.11 / 4.x
/5.1 / 6.0
Audio
Codec
*.flv
*.swf
xxThe power-saving mode of some external hard disk drives may
❑❑ Connecting a USB Device
TS
Bit
rate(Mbps)
The selected file is displayed on the top with its playing time.
Time, the Screensaver will run.
xxIf you use a USB extension cable, the TV may not recognize the
ASF
Frame
rate(fps)
---
xxIf the TV has no input during the time set in Auto Protection
be released automatically when your connect them to the TV.
*.3gp
3. Press the ENTERE button or � (Play) button.
device, the device may not be recognized or may malfunction.
MEDIA.P
*.dat
*.mpg
*.mpeg
*.vob
1. Press the ◄ or ► button to select Videos, then press the
ENTERE button in the Media Play menu.
xxPTP device is not supported.
xxIf the device is over-powered while connecting or using a USB
Media Play
*.ts
*.trp
*.tp
*.m2ts
be compatible with this TV.
xxBefore connecting your device to the TV, please back up your
PIN option.
SUM
1/1
✎✎ It might not work properly with unlicensed multimedia files.
✎✎ Need-to-Know List before using Media Play (USB)
xxThe file system supports FAT16, FAT32 and NTFS.
xxCertain types of USB Digital camera and audio devices may not
✎✎ Enter your 4-digit PIN. Change the PIN using the Change
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
00:04:03 / 00:07:38
Resolution
1
2
3
4
5
6
7
(Unit: inches)
8.7
2.9
2.9
4.3
2.2
9.1
6.4
(Unit: inches)
10.5
7.8
7.8
3.4
3.9
19.0
7.7
(Unit: inches)
13.6
7.8
7.8
5.2
5.6
23.5
10.7
- 16 -
2012-05-21 �� 9:41:52