Voyager Legend

User Guide

Contents

What's in the Box 3

Accessories 4

Headset Overview 5

Pairing 6

Pair first time 6

Pair another phone 6

Charge 7

Fit 8

Change the eartip 8

Wear on the left or right 8

The Basics 9

Make/Take/End Calls 9

Mute 10

Adjust the volume 10

Use sensors 10

Play or pause streaming audio 10

More Features 11

Voice alerts 11

Voice commands 11

Customize your headset 12

Multipoint 12

Specifications 13

2

What's in the Box

Headset

AC charger

USB charge cable

Foam eartip covers and silicone eartips

3

Accessories

Sold separately.

1

3

6

1

Portable charge case

2

Desktop charge stand

3

AC charger

4

USB charge cable

5

Car charge adapter

6

Micro USB charge adapter

7

Eartip kit (available in S, M, L)

4

7

2

5

4

Headset Overview

Call button

Volume button

Headset LED (indicator light)

Power button

Magnetic charge port

Mute button

Voice button

Play/Pause button voice

5

Pairing

Pair first time

1

The first time you switch on your headset it begins the pairing process.

Put the headset on and turn it on.

2 While the headset LEDs are flashing red and blue, activate Bluetooth ® on your phone and set it to search for new devices.

• iPhone Settings > General > Bluetooth > On

• Android ™

Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devices

3

4

NOTE

Menus may vary by device.

Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”

NOTE

To enable caller name announcement, allow access to your contacts if your phone prompts you.

Pair another phone

After pairing your headset to your phone you may want to pair another or new phone.

1 Switch on your headset then choose:

• Tap the Voice button and say “Pair mode,” or

2

• Press and hold the Call button until you hear “Pairing”

While the headset LEDs are flashing red and blue, activate Bluetooth ® on your phone and set it to search for new devices.

3

4

Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”

NOTE

To enable caller name announcement, allow access to your contacts if your phone prompts you.

6

Charge

Your new headset has enough power to pair and make a few calls before charging is needed, though you may charge at any time.

1 Align snap-fit magnetic areas of headset and USB cable.

2 Attach cable to USB wall charger or laptop for 90 minutes. LEDs turn off once fully charged.

7

Fit

Change the eartip

1

Change the eartip for a better fit.

Push in eartip and rotate to the left to unlock it.

1

2 Align new eartip into slot.

3 Rotate it to the right to lock it into place.

1

Wear on the left or right

To wear the headset on your other ear, rotate the boom upwards then twist it around so the eartip is on the other side before lowering the boom.

1

3

2

8

The Basics

voice

Make/Take/End Calls

Answer a call

Choose:

• Put on the headset to answer call, or

• Say “answer” after call is announced, or

• Tap the Call button

Answer a second call

First, tap the Call button to end current call, then tap the Call button again to answer new call.

End a call

Tap the Call button to end current call.

Reject a call

Choose:

• Take off the headset , or

• Say “ignore” after call is announced, or

• Press Call button for 2 seconds

Call back last call

Double-tap the Call button .

Voice dial (phone feature)

Press the Call button for 2 seconds, wait for phone prompt and then tell the phone to dial the name of a stored contact.

Caller Announcement

When wearing your headset, you will hear the name of a contact calling you so you can decide whether to answer or ignore the call.

An incoming caller name is announced:

• if your phone has the Phone Book Access Profile (PBAP)

• if you granted access to your contacts during pairing process

• if they are a stored contact

However, in the following situations, an incoming caller name is not announced:

• if you use the sensors to automatically answer a call while putting on your headset

9

Mute

Adjust the volume

Use sensors

• if the caller is unknown, unlisted, or blocked

During a call, you can mute the microphone.

Tap the Mute button. You will hear “mute on” confirmation. An alert repeats every 15 minutes to remind you of microphone mute. Tap the Mute button again to open the microphone and hear “mute off” confirmation.

Toggle the Volume button up (+) or down (–) during a call or while streaming audio.

Smart Sensors ™ technology in this headset recognizes if the headset is being worn and can automatically perform time-saving functions.

Putting on your headset will:

• Answer an incoming call

• Transfer an active call from your phone

• Resume streaming audio

Taking off your headset will:

• Reject an incoming call

• Transfer an active call to your phone handset

• Pause streaming audio

• Lock the Call button to avoid accidental calls

Play or pause streaming audio

1

Reset Sensors

You may need to reset the sensors if they are not working as expected.

Test Wearing the headset, tap the Call button to test sensors.

A talk time voice alert means sensors are working. A tone means sensors need to be reset .

2 Reset To reset the sensors, charge your headset and place on a flat non-metallic surface for more than 10 seconds.

A 2-second press of the Play/Pause button will either pause or resume playback of streaming audio.

NOTE

You must pause your streaming audio before you:

• use your headset's voice commands

• initiate an outbound call with your headset (call back or voice dial)

NOTE

If you power off the headset or go out of phone range while streaming audio, your headset will not play/pause the stream upon reconnecting until you manually resume streaming with your phone.

10

More Features

Voice alerts

Voice commands

Your headset tells you about status changes in English. You can change the voice alert language by visiting plantronics.com/myheadset and downloading the MyHeadset ™ Updater tool. The available languages are Cantonese, English U.K., French, German, Mandarin and Spanish.

Voice alerts list

• "Power on/off"

• "Answering call"

• "Talk-time (x) hours"

• "Battery low"

• "Recharge headset"

• "Lost connection"

• "Phone 1 connected/Phone 2 connected"

• "Pairing"

• "Pairing incomplete, restart headset"

• "Mute on/off"

• "Volume maximum/minimum"

• "Voice recognition on/off"

• "Redialing last outgoing call"

Adjust voice alert volume

Toggle the volume button when the headset is powered on and idle (not on a call or streaming music) to adjust the volume of the headset's voice alerts.

Tap the Voice button , wait for command request, then say a command. For example, “What can I say?” tells you the full list of available commands. You can change the voice command language by visiting plantronics.com/myheadset and downloading the MyHeadset ™ Updater tool. The available languages are English U.K., French, German, and Spanish.

Voice commands list

• "Am I connected?"

• "Answer"

• "Call information"

• "Call Vocalyst"

• "Cancel"

• "Check battery"

• "Ignore"

• "Pair mode"

• "Redial"

• "What can I say"

11

NOTE

The voice-dial feature on your phone is initiated by pressing the Call button for 2 seconds.

The voice-dial feature is not a headset voice command.

1

2

3

Disable the answer/ignore voice commands

To disable the “answer/ignore” voice commands:

Switch on the headset.

Press and hold the Voice button until you hear a double tone.

Repeat to reactivate the voice answer commands.

Customize your headset

Your headset understands and speaks in English. You can change the language and other settings online.

MyHeadset

™

Updater tool enables you to:

• Receive firmware updates

• Change language for voice alerts and commands (English U.K., French, German, and Spanish.

Voice alerts are also available in Cantonese and Mandarin.)

• Change regional phone number for Vocalyst service

• Turn voice commands on/off

• Turn Smart Sensors

™ on/off

• Turn high quality audio (A2DP) streaming on/off

• Turn "mute off" voice alert on/off

1

2

3

Download MyHeadset

™

Updater

Connect your headset and USB cable to your computer.

Download the MyHeadset ™ Updater tool from plantronics.com/myheadset.

Edit language, regional settings, configure other features, and download updates when available.

Multipoint

1

2

Voyager Legend supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones. To pair your headset to a second phone, see "Pair another phone".

To answer a second call on the other phone, the current call must be terminated or transferred back to the first phone. If you choose not to answer, the second call will go to voice mail.

Tap the Call button to end the first call.

Tap the Call button again to answer the second call

NOTE

To avoid issues with multipoint, use the Call button on the headset rather than your phone controls.

12

Specifications

Talk Time

Standby Time

Operating Distance (Range)

Headset Weight

Charge Connector

Battery Type

Charge Time (Maximum)

Power Requirements

Bluetooth Version

Bluetooth Profiles

Noise and Wind Canceling

Operating Temperature

Storage Temperature

Charging Temperature

Up to 7 hours

Up to 11 days

Up to 33 feet (10 meters), Class II

18 grams

Micro USB cable with magnetic snap-fit connection to headset, modular AC wall charger 100-240v

Rechargeable non-replaceable lithium ion polymer

90 minutes for full

5V DC – 180mA

Bluetooth v3.0

Supports Advanced Audio Distribution (A2DP), Audio/

Video Remote Control (AVRCP),Wideband Hands-free v1.6 (HFP), Headset v1.2 (HSP), Phone Book Access

Profile (PBAP), Secure Simple Pairing (SSP2)

Triple-mic active Digital Signal Processing (DSP) plus:

• Internal, adaptive 20-band equalizer

• Acoustic echo cancellation

• Sidetone detection for noise conditions

Triple-barrier wind noise protection includes:

• Stainless steel windscreens

• Acoustic fabric mesh

• Electronic filter in microphone circuitry

32°F - 104°F (0 - 40°C)

32°F - 104°F (0 - 40°C)

32°F - 104°F (0 - 40°C)

13

NEED MORE HELP?

www.plantronics.com/support

Plantronics, Inc.

345 Encinal Street

Santa Cruz, CA 95060

United States

Plantronics BV

South Point Building C

Scorpius 140

2132 LR Hoofddorp, Netherlands

©

2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners.

Patents pending

88887-06 (12.12)