PPF 650
EN User Manual
Dear Customer
About this User Manual
Introduction Brand Variable
EN
With the purchase of this device, you have chosen a quality
PHILIPS product brand. Their device fulfils the most varied requirements for private use or in your office and business everyday.
Your device is delivered with an already inserted free ink
film for a few test pages. For this film, you do not require
any Plug’n’Print card (= chip card with information
regarding ink film capacity).
In the telephone book of your device, you can save entries
with multiple numbers and collect multiple entries into
groups. You can assign various ring tones to the entries.
You can assign short dial numbers to frequently dialled telephone numbers. The numeric keys help you to call these
numbers quickly.
The cordless telephone is provided with its own telephone
book. With the cordless telephone you can send and read
SMS messages (function is not supported in all countries
and networks).
You can individually set ringer tones and notification
tones, wallpaper and menu colours of the cordless telephone. Additional functions such as alarms, timer, birthday reminder or a room monitoring function are also available to you. You can register up to five cordless telephones
with your device.
You can send fax messages in different resolutions to one
or more recipients or a group. You can also poll faxes and
prepare documents for polling.
Five fax templates, which you can use, are stored in your
device. With these templates you can quickly create, for
example, a short fax note or an invitation.
Select the resolution for text and photo in order to copy
documents with your device. You can also create multiple
copies.
You can send SMS messages from your device if this service
is activated for your telephone line (this function is not
supported in all countries and networks). Received SMS
messages can be managed with the extensive functions of
the SMS menu.
Activate notification by SMS to receive an SMS message,
for instance on your mobile phone, when calls, fax transmissions or other messages arrive in your absence (this
function is not supported in all countries and networks).
If you want, your device can print Sudoku puzzles in four
different difficulty levels with solution.
We hope you enjoy your device and its many functions!
With the installation guide on the following pages, you can
start using your device quickly and easily. Detailed descriptions can be found in the following sections of this user
manual.
Read the entire user manual carefully. Follow all safety
instructions in order to ensure proper operation of your
device. The manufacturer accepts no liability if these
instructions are not followed.
Telephone Book
Symbols Used
Dangers
DANGER!
Short Dial
DANGER!
Warns about dangers for people, damage to the
device or other objects as well as possible loss of
data. Injuries or damage can result from
improper handling.
Telephone Book
Troubleshooting
Functions
Notice
Troubleshooting
This symbol designates tips that will help you to
use your device more effectively and easily.
Fax Templates
2
Philips · PPF 650
Table of Contents
Dear Customer ............................................................ 2
About this User Manual .............................................. 2
1 General Safety Information ................ 5
2 Overview............................................... 6
Overview of the Menu Functions ................................
Device Overview ..........................................................
Cordless Telephone Panel ............................................
Panel ...........................................................................
6
7
8
9
3 Initial Operation ................................ 10
Contained in the packing ..........................................
Attaching the Paper Tray ...........................................
Inserting Paper ..........................................................
Connecting the Telephone Cord ...............................
Connecting the Power Cord ......................................
Initial Installation ......................................................
Inserting Batteries in Cordless Telephone ..................
Putting Cordless Telephone in Operation .................
10
10
10
11
11
11
12
13
4 Telephone Functions ......................... 14
Putting a Call from Cordless Telephone ....................
Calling additional telephone functions ......................
Getting Outside Line .................................................
Hands-free .................................................................
Forwarding a call .......................................................
Placing internal calls ..................................................
Calling Line Identification (CLIP) .............................
Missed Calls ..............................................................
14
14
15
15
15
15
16
16
5 Telephone Book of the Device ......... 17
Saving entry ...............................................................
Edit Entry ..................................................................
Deleting an Entry ......................................................
Groups ......................................................................
Short Dial ..................................................................
17
17
17
17
18
6 Telephone Book of the Cordless Telephone ....................................................... 19
Saving Entry ..............................................................
Edit Entry ..................................................................
Deleting an Entry ......................................................
Adding an Additional Number ..................................
Changing the Ring Tone ...........................................
Calling Options .........................................................
19
19
19
20
20
20
8 Fax....................................................... 25
Sending fax ................................................................
Sending Fax Manually ...............................................
Chain Dialling ...........................................................
Insert Dialling Pause ..................................................
Direct Inward Dialling or Selecting Sub-address ........
Eavesdropping while Connection is Established .........
Sending to Multiple Recipients (= Broadcasting) .......
Sending Fax Later ......................................................
Fax Reception ............................................................
Receiving Fax Manually .............................................
Polling Faxes ..............................................................
Using Fax Templates .................................................
25
26
26
26
26
26
26
27
27
27
27
27
9 Copier ................................................. 28
Inserting Documents ................................................. 28
Making a Copy .......................................................... 28
Creating Multiple Copies ........................................... 28
10 SMS ..................................................... 29
SMS Requirements ....................................................
Sending SMS .............................................................
Notification by SMS ..................................................
Receiving SMS Messages ............................................
Reading SMS Messages ..............................................
Calling SMS Functions ..............................................
Printing SMS Messages ..............................................
Deleting SMS Messages .............................................
Modifying the Settings ...............................................
29
29
30
31
31
32
32
32
33
11 Fun and Games.................................. 34
Sudoku ...................................................................... 34
12 Settings on the Device ...................... 35
Entering the Date and Time ......................................
Selecting the Language ...............................................
Selecting the Country ................................................
Entering Number .......................................................
Entering Your Name ..................................................
Setting the Contrast ...................................................
Reducing Transmission Speed ...................................
Switching Page Adjustment On and Off ....................
Setting the Ring Tones ..............................................
Setting the Fax Switch ...............................................
Printing Lists and Help Pages ....................................
Starting Initial Installation .........................................
35
35
35
35
35
35
36
36
36
36
36
37
7 Cordless Telephone........................... 21
13 Settings on the Cordless Telephone 38
Looking for Cordless Telephone ................................
Switching On and Off ...............................................
Navigating in the Menu .............................................
Keypad Lock ..............................................................
Activating Emergency Call Number ..........................
Additional Functions .................................................
Selecting the Language ...............................................
Setting the Ring Tones ..............................................
Turning Key-Tones and Signal-Tones On and Off ....
Switching Silent Mode On/Off ..................................
Programmable Keys ...................................................
Automatic Picking up and Hanging up the Phone .....
Resetting the Cordless Telephone ..............................
Displaying Call Logs and Events ................................
Table of Contents
21
21
21
21
21
22
38
38
38
38
38
38
39
39
3
EN
14 Telephone Lines and Additional
Devices..................................................... 40
EN
Configuring Telephone Lines and Services ................ 40
Registering and De-Registering Additional Cordless Telephones ....................................................................... 40
Connecting Additional Devices ................................. 42
Using Additional Telephones (Easylink) .................... 42
15 Service................................................. 43
Checking the Ink Film Reserve ..................................
Changing the Ink Film ..............................................
Fixing a Paper Jam .....................................................
Fixing a Document Jam .............................................
Cleaning ....................................................................
Displaying the Battery Charge ...................................
Changing the Batteries in the Cordless Telephone .....
Checking the Firmware Version ................................
Using Service Codes ..................................................
Power Cycling ...........................................................
43
43
45
45
46
47
47
47
48
48
16 Appendix............................................. 50
Technical Data ..........................................................
Guarantee ..................................................................
Declaration of Conformity (DoC) .............................
Customer Information ...............................................
4
50
50
52
56
Philips · PPF 650
1 General Safety Information
Introduction 3
Your device has been tested in conformity with standards
EN 60950-1 and IEC 60950-1 and should only be operated with telephone systems and power equipment that
meet these standards. The device was built exclusively for
use in the indicated sales region.
Do not make any changes or settings that are not described
in this user manual. Physical injury or damage to the
device or loss of data can result from improper handling.
Take note of all warning and safety notes indicated.
Introduction 2
Power Supply
Check whether the mains voltage of your device
Check whether the mains voltage of your device (indicated on the
type label) matches the mains voltage available at the setup location.
Use only the power and telephones cables supplied.
Set up your device so that the power socket is easily accessible.
The device does not have an on/off button. In an emergency,
disconnect your device from the power supply by pulling the
power plug.
Never touch the power or telephone cable if the insulation
is damaged. Replace damaged wires immediately. Use suitable cables only; if necessary please contact our technical
customer service or your retailer.
Disconnect your device from the power and telephone networks during an electrical storm. If this is not possible, do not
use the device during an electrical storm.
Before cleaning the surface of your device, disconnect it from
the power and telephone networks. Use a soft, lint-free cloth.
Never use liquid, gaseous or easily flammable cleansers (sprays,
abrasives, polishes, alcohol). Do not allow any moisture to
reach the interior of the device.
Only clean the display with a dry, soft cloth. If the display
breaks, a mildly corrosive liquid may escape. Avoid all contact
with your skin and eyes.
In the event of a power failure, your device will not function;
saved data is retained.
Use only the power and telephones cables supplied.
The device does not have an on/off button.
Never touch the power or telephone cable if the insulation is damaged.
Setting Up the Machine
The device should rest securely on a stabile, flat surface.
The device should rest securely on a stabile, flat surface. If
the device should fall, it can be damaged or can cause
injury to people, especially small children. Position all
cables in such a way that no one will stumble on them, thus
avoiding possible injuries to persons or damage to the
device itself.
The distance between the device and other devices or
objects must be at least 15 centimetres; this also applies to
the use of additional cordless telephones. Do not place the
device in the vicinity of radios or televisions.
Lock the cover of the device completely into place when
opening the device. You could be injured if the cover falls
while you are working on the device.
Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the
device in the vicinity of heaters or air conditioners.
Observe the information on temperature and humidity in
the technical data.
The device must have sufficient ventilation and may not be
covered. Do not put your device in closed cabinets or
boxes. Do not place the machine on soft surfaces such as
tablecloths or carpets and do not cover the ventilation slits.
Otherwise, the device can overheat and catch on fire.
In the event that the device becomes too hot, or if you see
smoke coming from the device, you must immediately pull
the power cable out of the power socket. Have your device
examined by trained professionals at a technical service
location. To prevent the spread of fire, open flames should
be kept away from the device.
Do not plug in the device in moist rooms. Never touch the
mains cable, the mains connection or the telephone socket
with wet hands.
Do not allow liquids to enter into the device. Disconnect
the device from the power socket if liquids or foreign
objects have entered the device and have your device examined by trained professionals at a technical service location.
Do not allow children to handle the device without supervision. The packing materials should be kept out of the
hands of children.
The telephone handset of the device is magnetic. Caution,
small metallic objects (paper clips) may be retained if
placed near or on the telephone handset.
The distance between the device and other appliances or objects, must be at least 15 centimetres.
Lock the cover of the device completely into place
Protect the device against direct sunlight
The device must have sufficient ventilation
In the event that the device becomes too hot, or if you see smoke coming from the device
Do not plug in the device in moist rooms.
Do not allow liquids to enter into the device.
Do not allow children to handle the device without supervision.
Magnetic telephone handset
Disconnect your device from the power and telephone networks during an electrical storm.
Before cleaning the surface of your device, disconnect it from the power and telephone networks.
Only clean the display with a dry, soft cloth.
In the event of a power failure, your device will not function;
Repairs
Display
Should disruptions occur, follow the instructions on the display
and on the error report.
Do not make any repairs to the device yourself. Improper
maintenance can result in injuries or damage to the device.
Only have your device repaired by an authorised service centre.
Do not remove the type label from your device; this would
void the warranty.
Repairs
Consumable Materials
Original Consumable Material
Use only original consumable materials. These are available
from a specialised retailer or through our order service (see
back side of this user manual). Other consumable materials
could damage the device or shorten its service life.
Dispose of old consumable materials according to the waste
regulations of your country.
Environment
Cordless Telephone
Batteries 1
Never place the cordless telephone in the charging station without rechargeable batteries or with non-rechargeable batteries.
Do not install or use your cordless telephone in a damp environment. Never touch the cordless telephone with wet hands.
The functioning of security systems, medical equipment or
sensitive devices can be disrupted by the transmission
power of the cordless telephone. Observe any usage regulations (or restrictions) in the vicinity of such equipment.
The batteries used should be disposed of according to the
recycling regulations of your country.
Cordless Telephone 1
Cordless Telephone 2
Batteries 2
General Safety Information ·
5
EN
2 Overview
EN
Overview of the Menu Functions
The following functions are available on your device.
There are two ways in which you can call functions:
Navigating in the Menu: Press OK or one of the two
arrow keys [, to open the function menu. Page through
[ menu entries. Use OK to select a menu function. Press
C to return to the previous menu level. Press STOP to
close the menu and return to the starting mode.
Calling Functions Directly: You can call a menu function directly using the function number. Press OK and
enter the appropriate function number using the numeric
keypad. Confirm with OK. You will find the function
number in the following list.
Menu Navigation
4 Miscellaneous
41 Printing Call Log
41 Printing call log..................................... page 37
43 Using fax templates ............................... page 27
44 Setting the contrast................................ page 35
45 Using service codes................................ page 48
46 Checking the ink film reserve ................ page 43
47 Checking the firmware version .............. page 47
48 Sudoku.................................................. page 34
43 Using Fax Templates
44 Setting the Contrast
45 Using Service Codes
46 Checking the Ink Film Reserve
47 Checking the Firmware Version
48 Sudoku
Direct Loading
Help 6 · Function List
5 Fax switch
51 Configuring Day Mode
51 Configuring day mode .......................... page 36
52 Configuring night mode........................ page 36
53 Setting the timer.................................... page 36
54 Easylink................................................. page 42
55 Setting the ring tones ............................ page 36
52 Configuring Night Mode
53 Setting the Timer
54 Easylink
Notice
Printing the Functions List
Press i and 6 to print a list of all functions
and settings of your device.
55 Setting the Ring Tones
6 SMS
61 Sending SMS (PPF 650 · 685/695)
61 Sending SMS ........................................ page 29
62 Reading SMS ........................................ page 31
63 Printing SMS ........................................ page 32
64 Deleting SMS........................................ page 32
65 Notification by SMS ............................. page 30
66 SMS access ............................................ page 33
62 Reading SMS (PPF 650 · 685/695 · SPFX 40/45 · 48/49)
1 Telephone book
11 Looking Up an Entry (PPF 650)
11 Looking up an entry...............................page 25
12 New entry ..............................................page 17
13 Creating group.......................................page 17
14 Short dial ...............................................page 18
15 Modifying an entry ................................page 17
16 Deleting entries......................................page 17
17 Printing entries ......................................page 37
12 New Entry (PPF)
13 Creating Group
63 Printing SMS
64 Deleting SMS (PPF 650 · 685/695 · SPFX 40/45 · 48/49)
65 Notification by SMS
66 SMS Access
14 Short Dial without Short Dialling Button
15 Changing Entries
16 Deleting Entries
17 Printing Entries
2 Calls
21 Received Calls (PPF 650)
21 Received calls .........................................page 25
22 Outgoing calls........................................page 25
23 Printing entries ......................................page 36
22 Outgoing Calls (PPF 650)
23 Printing Entries
3 Fax
31 Polling
31 Polled reception .....................................page 27
32 Polling send ...........................................page 27
33 Sending fax later ....................................page 27
34 Sending to multiple recipients (= broadcast)
.......................................................................page 26
35 Printing fax journal ................................page 37
36 Printing transmission report...................page 37
37 Print reduced in size...............................page 36
38 Reducing transmission speed..................page 36
32 Polling Send
33 Sending Fax Later
8 Cordless Telephone
81 Locating Cordless Phones
81 Locating cordless phones ....................... page 21
82 Registering cordless telephone ............... page 41
83 De-registering cordless telephone .......... page 41
82 Registering Cordless Telephone
83 Deregistering Cordless Telephone
9 Settings
91 Entering the Date and Time
91 Entering the date and time .................... page 35
92 Selecting the language ........................... page 35
93 Selecting the country............................. page 35
94 Entering number................................... page 35
95 Entering name....................................... page 35
96 Configuring telephone lines and services
...................................................................... page 40
92 Selecting the Language
93 Selecting the Country
94 Entering Number
95 Entering Name (PPF)
96 Configuring Telephone Lines and Services
34 Broadcasting
35 Printing Fax Journal
36 Printing Transmission Report
37 Print Reduced in Size
38 Reducing Transmission Speed
6
Philips · PPF 650
Device Overview
Basic Description
‚ Paper tray
ƒ Document feeder (writing facing up)
„ Panel with display
… EXT socket—Connection socket for additional
devices
† LINE socket—Connection socket for telephone cable
PPF 620
‚ Scanner glass
ƒ Rollers of the automatic document feeder
„ Rests of the intake rollers
… Document guide / scanner film
† Cover for scanner and automatic document feeder
‡ Toothed wheel for tightening the ink film
ˆ Ink film roll in the rear ink film compartment
‰ Ink film roll in the front ink film compartment
Š Slot for the Plug’n’Print card
‹ Locks for the cover of the scanner and automatic document feeder
Innenansicht nummeriert
Internal Description
Overview · Device Overview
7
EN
Cordless Telephone Panel
Panel Monochrome Dect
Programmable Button Left
õ—Programmable key (the saved function appears on the
display)
ô—Programmable key (the saved function appears on
the display) / calling options / confirming selection
“/@—Press briefly: Place calls / receives calls / hands
free / press and hold: Redialling / switching on cordless telephones
’—Press briefly: Ending calls / aborting menu functions
/ press and hold: switching off cordless telephone
m—Press briefly: Calling up the telephone book from the
device / hold pressed: Calling the telephone book of the
cordless telephone
_—Calling the SMS menu (function is not supported
in all countries and networks)
[—Calling the menu functions / navigation within the
menu / selecting options / moving the cursor / adjusting
the volume level
C—Returning to the previous menu level / deleting individual digits
OK—Calling the menu functions / confirming input
*/•—Press and hold: Turning keypad lock on/off
0—Inputting special characters
R—Switching between calls (= call toggling)
{—Forwarding a call to the device or to other cordless
telephones
Programmable key Right
The Green Button
EN
Red Key
Telephone Book Key
SMS Key
Arrow Keys
C Key
OK Key
Keypad Lock
0 Key
R Key
Intercom Key
Symbols on the LCD Display
Display Monochrome Dect
·—Display of the battery charge
¢—Internal telephone call (= intercom) with another
cordless telephone or the device
£—External telephone call
_—New SMS received
¥—Alarm clock switched on
©—Timer switched on
1—Number with which the cordless telephone is registered with the base unit
Telephone INT
Telephone EXT
SMS
Alarm
Timer
Registration Number
Rechargeable Batteries
8
Philips · PPF 650
Panel
Message
ä—Lights up, if new messages are received / list of
the new messages with submenus / blinks in the case of
device error (for example no ink film)
{—Locating cordless phones (all registered cordless
phones start ringing)
ma—Press briefly: Calling up the telephone book
entries. Selecting the entries with the [ / press and hold:
saving new entries
¼/º/»—Setting the timer and the fax reception modes
(= fax switch). Modes set on the display ™ (day), ˜ (night).
Activated timer is indicated with ›
STOP—Function abort / return to the starting mode /
documents eject
C—Return to the previous menu level / press briefly:
deleting individual characters / press and hold: deleting
complete input
[—Calling the menu functions / navigation within the
menu / selecting options / moving the cursor / adjusting
the volume level
OK—Calling the menu functions / confirming input
Dect (PPF 650)
Telephone Book
Fax Switch
Stop
C
Arrow Keys
OK
Overview · Panel
Start
START—Press briefly: Starting transmission of messages
/ press and hold: Starting fax polling
i—Press briefly: Printing help pages and setting lists /
press and hold: Starting initial installation process
COPY—Press briefly: creating a copy / press and hold:
creating multiple copies / printing SMS
ã—Setting higher resolution for faxes and copying
(RESOL.: STANDARD, RESOL.: FINE, RESOL.:
PHOTO)
_—Calling the SMS menu (function is not supported
in all countries and networks)
Numeric keypad—Inputting digits, characters and special
characters / press and hold: Recalling short dial numbers
@—Press briefly: Toggling between the list of the last 10
dialled numbers (= redial list) / press and hold: List of last
ten callers (caller list)
ß—Listening while connection is established
R—Press briefly: insert short line interruption (Hook
Flash) as office index on PABX or for calling special functions in the public telephone network (PSTN)/long press:
Inserting dialling pause
Help
Copy (SMS)
Resolution
SMS (not supported everywhere)
Numeric Keys (short dial)
Redialling
Speaker (PPF 620 · 633 · 650 · SPFX 40 · 45)
R
PPF 650
9
EN
3 Initial Operation
EN
Contained in the packing
Inserting Paper
Basic Package Contents
Paper Format
‚ Device
ƒ Paper tray
„ Power cord with plug (country-specific)
… Telephone cord with plug (country-specific)
† Charging station
‡ Three rechargeable batteries
ˆ Cordless telephone
User manual with installation guide (not depicted)
Before you can receive documents or make copies, you
must load paper into the device. Please use only appropriate paper in standard format A4 (210 × 297 millimetre ·
preferably 80 g/m2). Follow the specifications in the technical data.
Dect packing contents
Loading Paper
Notice
Loading Paper
Separate the paper sheets by fanning them out,
then align them by tapping edge of the stack
lightly against a flat surface. This will prevent
several sheets of paper from being drawn in all at
once.
User Manual
Contained in the packing
Preparing Paper
Inserting Paper
1 Fold open the lever on the right beside the paper feed
towards front.
2 Insert paper in the paper feeder. You can insert maximum 50 sheets (A4 · 80 g/m2).
3 Fold open the lever on the right beside the paper feed
backward in order to enclose the paper.
Inserting Paper
Missing Package Contents
Notice
Missing Package Contents
If one of the parts is missing or damaged, please
contact your retailer or our customer service.
Attaching the Paper Tray
Attaching the Paper Tray
Insert the paper tray into the openings behind the paper
feed mechanism.
Attaching the Paper Tray
10
Philips · PPF 650
Connecting the Telephone
Cord
Connecting the Power Cord
Mains Voltage at the Site of Installation
CAUTION!
Connecting the Telephone Cable
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device
(indicated on the type label) matches the mains
voltage available at the setup location.
Notice
Analogue Fax Machine
Your device is an analogue fax device (Group 3).
It is not an ISDN device (Group 4), and therefore it cannot be operated directly on an ISDN
connection. In order to do this, you need either
an analogue adapter or a connection for analogue terminals.
Connecting the Telephone Cable
Connect the telephone cable to the device by inserting it in
the socket designated with LINE (RJ-11-Connector).
Insert the telephone plug into your PTT line socket.
Device Mains Cable
Connecting Mains Cable of the Device
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Plug the power cable into the electrical outlet.
Connecting the Power Cable
Connecting the Telephone Cable
Charging Station Mains Cable
Connecting the Mains Cable of the Charging Station
Connect the mains cable of the charging station to the
electrical socket.
PABX Systems 1
Notice
Ladestation anschließen
Connection to Private Automatic
Branch Exchange
If you connect your device as extension to a telephone system, you must set it for working as an
extension (also see Chapter Telephone connections and additional devices, page 40).
Ireland
Two-pin
When connecting to the telephone line socket, use only a
two-pin RJ-11-telephone cable (modular plug). The use
of a four-pin telephone cable may lead to the device not
functioning correctly.
Initial Installation
Starting Initial Installation
After you connect your device to the mains voltage, the initial installation commences. Press i. Your device prints a
help page.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Initial Operation · Connecting the Telephone Cord
11
EN
Selecting the Country
Setting the Country Correctly
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your device is not
adapted to the telephone network. If your country is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
EN
Inserting Batteries in Cordless Telephone
1 Insert the new rechargeable batteries in the battery
compartment with the positive and negative poles as
shown in the picture in the battery compartment.
DANGER!
No Non-Rechargeable Batteries!
Never use non-rechargeable batteries in the
cordless telephone. Follow the specifications
in the technical data.
Setting the Country
1 Use [ to select the country in which you are operating the device.
2 Confirm with OK.
After this input, the device prints another help page and
checks the telephone line.
Entering Number
Page Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
1 Enter your number. Using # or * you can enter a
plus sign.
2 Confirm with OK.
Entering Number
Entering Your Name
2 Place the cover on the battery compartment and slide it
upward until it snaps into place.
3 Place the cordless telephone into the charging station.
Entering Your Name
1 Enter your name. You can enter characters using the
numeric keys (see button labels). Enter special characters using 0. Press the respective button several times
until the desired character or special character appears
on the display.
DANGER!
Never Into the Charging Station
Without Batteries!
Never place the cordless telephone into the
charging station without batteries.
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters.
2 Confirm with OK.
After the input, the machine prints an overview of the
functions.
Entering the Date and Time
Entering Time/Date
1 Enter the time, e.g. 14 00 for 2 pm.
2 Enter the date (two digits for each field), for example
08 06 07 for June 8th, 2007.
3 Confirm with OK.
Help 2 · Initial Installation Process
Notice
Starting Initial Installation Process
You can restart the initial installation process
any time. Press i and 2.
12
Notice
Charging Batteries for 12 Hours
Leave the cordless telephone in the charging
station for at least twelve hours. The batteries
will heat up slightly during charging; this is
not dangerous.
Philips · PPF 650
Putting Cordless Telephone
in Operation
Switching on Cordless Telephone
Press the green “ key for at least two seconds for switching on your cordless telephone.
Normally your cordless telephone is registered with your
device in the factory. In the starting mode, press OK. The
display shows on which base unit and with which number
the cordless telephone is registered.
EN
Configuring the Cordless Telephone
Unregistered Cordless Telephones
Notice
Unregistered Cordless Telephones
If you acquired a model with several cordless telephones, only one cordless telephone is registered with your device in the factory. Insert the
batteries as described above and register the
cordless telephones with your device (also see
Chapter "Telephone Connections and Additional Devices", page 40).
Initial Operation · Putting Cordless Telephone in Operation
13
4 Telephone Functions
EN
For information on how to connect additional cordless telephones and another device and which functions are available to you, please refer the chapter on Telephone Connections and additional devices, Page 40.
Putting a Call from Cordless
Telephone
Caller List:
1 Press [, and using [ to select CALLS.
2 Confirm with OK.
3 Using [, select from which list you would like to dial
a number.
4 Confirm with OK.
5 Select the desired number using [.
Adjusting Volume Level
Dialling a Number
Dial the desired number. There are several ways to do this:
Then press “.
Notice
Adjusting Volume Level
You can adjust the volume level of the speaker
on the cordless telephone using [ even during
a call.
Direct Dialling
Notice
Direct Dialling
You can also press “ first and then dial a
number. The dialling process begins immediately.
Forwarding Fax to the Device
Notice
Forwarding Fax to the Device
If you receive a call on the cordless telephone
and hear that it is a fax call (whistling tone or
silence), you can start the fax reception on the
device. Press either START on the device or
*5 on the cordless telephone.
Manual Dialling: Dial the desired number using the
numeric keypad.
Telephone Book of the Cordless Telephone:
1 Hold m pressed (for at least two seconds).
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the telephone book.
Notice
Additional Number
If you have added an additional number to
an entry, this entry appears twice in the telephone book. The symbol of the category
appears before the name.
Telephone Book of the Device:
1 Press m.
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the telephone book.
Short Dialling:
1 Press and hold the relevant numeric key on the device
(at least two seconds).
2 Press “ on the cordless telephone.
Redial List: Press and hold @ (at least two seconds).
Use [ to select an entry from the list of the dialled numbers.
14
Looking Up Numbers
Looking Up Numbers
During a call, you can look up the telephone book entries.
1 During a call, press ô Menu.
2 Using [ select PHONEBOOK.
3 Using [, dial the desired entry.
One Menu back
Notice
Navigating in the Menu
Press õ Return to go back to the previous
menu level.
Calling additional telephone
functions
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
You can use additional telephone functions with your
device for example call toggling, three-way call or call forwarding. Contact your telephone company to inquire
whether or not these functions are available for your connection. The signal to the switchboard to call these services
is a short line interruption (Hook Flash). How to call up
the functions, depends on your telephone company and
may vary from the description found below.
Additional Telephone Functions
Receiving a Second Call
During a call, press ô ACCEPT to accept the new call.
Switching Between Calls (= Call
Toggling)
2: Call Toggling
Notice
Hot Key
Press R, to toggle between the calls.
1 During a call, press ô Menu.
2 Using [ select SWITCH.
3 Confirm with OK.
Philips · PPF 650
Making a Second Call
Switching Off Hands-free
Dialling Another Number
Notice
Hot Key
Pressõ, and dial the other number.
1
2
3
4
During a call, press ô Menu.
Using [ select SECOND CALL.
Enter the desired number using the numeric keypad.
Press ô Call.
1 Select Deact. again.
2 Press ô Deact..
Switching Hands-Free On/Off
Notice
EN
Switching Hands-Free On/Off
You can switch the hands-free mode on and off
by pressing “ key during a telephone call.
Forwarding a call
1: Ending a Call
Forwarding
Function
Only
a Call
Available
to Dectwith Several Cordless Telephones Registered to the device
Notice
Notice
Hot Key
Press õ and 1, to end the call and to activate
the call on hold.
Function Only Available with Several
Cordless Telephones Registered to the
device
This function is available only if you have registered several cordless telephones with your
device and the telephones are within the range of
the device.
Getting Outside Line
PABX Systems
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an outside line
access code in order to get a connection to the public telephone network (PSTN) from a PABX.
Enter the outside line access code with which you reach the
public telephone network before you enter the desired
number or select a stored entry. The outside line access
code is usually 0.
Inserting Outside Line Access Code
Incorrect Outside Line Access Code
Notice
Incorrect Outside Line Access Code
In rare cases, the outside line access code may be
a different number or a two-digit number. For
older telephone systems, the outside line access
code can be R (= Flash). Press R to enter this
outside line access code. If the connection to the
public telephone network is not possible, contact your telephone system supplier.
During a call, press ô Menu.
Using [ select CALL TRANSFER.
Confirm with OK.
Select the cordless telephone to which you would like
to transfer the call using [.
5 Confirm with OK.
6 Press ’, to hang up.
1
2
3
4
Getting Back the Telephone Call
You can get a transmitted telephone call back, before the
cordless telephone is picked up.
1 Press ô Menu.
2 Using [ select HANGING UP.
3 Confirm with OK.
Setting Up an Extension
Notice
Connection to Private Automatic
Branch Exchange
If you operate your device permanently at an
extension, store the outside line access code with
the 96 function (see page 40).
Hands-free
Low Battery Charge
Notice
Low Battery Charge
This function is not available if the battery
charge of the cordless telephone is low. Place the
cordless telephone into the charging station.
Switching On Hands-free
Placing internal calls
Intercom Dect
Function
Only Available with Several Cordless Telephones Registered to the device
Notice
Function Only Available with Several
Cordless Telephones Registered to the
device
This function is available only if you have registered several cordless telephones with your
device and the telephones are within the range of
the device.
1 In the starting mode, press {.
2 Using [ dial the cordless telephone you would like to
call.
3 Press ô Call.
1 During a call, press ô Menu.
2 Using [ select Deact..
3 Confirm with OK.
Telephone Functions · Getting Outside Line
15
Calling Line Identification
(CLIP)
Function is not supported in all countries and networks
EN
(Function is not supported in all countries and
networks)
The number of the caller appears on the display of the
device and the cordless telephone. For this function to
work, the Calling Line Identification Presentation (CLIP)
must be activated for your telephone connection. Enquire
with your telephone company. Caller Line Identification
may be associated with a fee.
CLIP Definition
Setting the Country Correctly
Notice
Setting the Country Correctly
If the Caller Line Identification does not work
even though the function is activated for your
telephone connection, check if you have set the
correct country (also see Chapter Settings, page
35).
Missed Calls
Displaying Telephone Book Names
Notice
Displaying Telephone Book Names
Your device displays the name with which you
have saved the number in the telephone book.
The number and name will not be shown if the
caller suppresses his number.
Missed Calls on Dect
If you receive calls in your absence, a message appears on
the display of the cordless telephone.
1 Press OK.
2 Using [, you can page through the list of missed calls.
3 Press “, to call back.
16
Philips · PPF 650
5 Telephone Book of the Device
Edit Entry
Help 3 · Telephone Functions
Notice
Printing Telephone Book Functions
Press i and 3 to print an overview of the telephone book functions.
Telephone Book
In the telephone book of your device, you can save entries
with multiple numbers and collect multiple entries into
groups. You can assign various ring tones to the entries.
Follow the specifications in the technical data.
Cursor Navigation 1
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters. Press STOP to
close the menu and return to the starting mode.
Saving entry
1 Hold ma pressed (for at least two seconds).
Press OK, 15 and OK.
Using [ select the entry which you would like to edit.
Confirm with OK.
Edit the name.
Confirm with OK.
Using [, select the category for which you would like
to enter a number: CATEGORY: HOME, CATEGORY: WORK, CATEGORY: MOBILE or CATEGORY: FAX.
7 Confirm with OK.
8 Enter the telephone number.
9 Confirm with OK.
10 You can assign a ring tone to the number. Use the
number keys 0 to 9 to select a ring tone. Using
[, set the volume.
11 Confirm with OK. The entry is saved.
1
2
3
4
5
6
Notice
Access Function
You can also call the function by pressing
OK, 12 and OK.
2 Enter the name. You can enter characters using the
numeric keys (see button labels). Enter special characters using 0. Press the respective button several times
until the desired character or special character appears
on the display.
3 Confirm with OK.
4 Using [, select the category for which you would like
to enter a number: CATEGORY: HOME, CATEGORY: WORK, CATEGORY: MOBILE or CATEGORY: FAX.
5 Confirm with OK.
6 Enter the telephone number.
7 Confirm with OK.
8 You can assign a ring tone to the number. Use the
number keys 0 to 9 to select a ring tone. Using
[, set the volume.
9 Confirm with OK. The entry is saved.
Telephone Book of the Device · Saving entry
Deleting an Entry
1 Press OK, 16 and OK.
2 Using [ select the entry which you would like to
delete.
3 Confirm with OK.
4 Confirm DELETE: YES with OK.
Groups
Groups
You can combine several telephone book entries into a
group. A message is sent to all members of this group in
succession.
Adding Group Entries
1 Press OK, 13 and OK.
2 Use [ to select the group you would like to create.
3 Confirm with OK. You can add entries to the group,
display the members of the group, delete the group or
send a fax to the group.
4 Using [ select ADD MEMBER?.
5 Confirm with OK.
6 Use [ to select the entry you would like to add to the
group.
7 Confirm with OK.
8 Repeat steps 4 to 6 to add additional entries to the
group.
9 Press STOP to end the input.
17
EN
Displaying Group Entries
EN
1
2
3
4
5
6
7
Press OK, 13 and OK.
Use [ to select the group you would like to display.
Confirm with OK.
Using [ select VIEW MEMBERS?.
Confirm with OK.
Page through the entries of the group with [.
Press STOP twice to return to the starting mode.
Deleting Individual or All Group
Entries
Short Dial
Short Dial
You can assign short dial numbers to frequently dialled telephone numbers. The numeric keys help you to call these
numbers quickly.
Assigning or Editing Short Dial
Entry
1 Press OK, 14 and OK.
2 Use [ or the respective number key to select the short
dial number you would like to assign or change.
CAUTION!
Overwriting Short Dial Entries!
If you select a short dial number that is
already assigned, the entry is overwritten.
Deleting an Individual Entry
1 Press OK, 13 and OK.
2 Using [ select the group from which you would like
to delete entries.
3 Confirm with OK.
4 Using [ select DELETE MEMBER?.
5 Confirm with OK.
6 Using [ select the entry which you would like to
delete.
7 Confirm with OK.
8 Using [ select DELETE: YES.
9 Confirm with OK. The entry is deleted.
Deleting a Group
1
2
3
4
5
6
7
18
Press OK, 13 and OK.
Using [ select the group you would like to delete.
Confirm with OK.
Using [ select DELETE MEMBER?.
Confirm with OK.
Using [ select DELETE: ALL.
Confirm with OK. All entries in the group are deleted.
3 Confirm with OK.
4 Use [ to select the telephone book entry you would
like to assign as a short dial entry.
5 Confirm with OK.
Deleting a Short Dial Entry
The Telephone Book Entry is Deleted!
CAUTION!
The Telephone Book Entry is Deleted!
This function not only deletes the short dial
entry, it also deletes the entire entry from the telephone book. Overwrite the short dial entry if
you would like to change the assignment.
1 Press OK, 14 and OK.
2 Use [ or the respective number key to select the entry
you would like to delete.
3 Press C.
4 Confirm the deletion with OK.
Philips · PPF 650
6 Telephone Book of the Cordless Telephone
Restricted Telephone Book Functions
Notice
Restricted Telephone Book Functions
All functions for the telephone book of the
device are not available to you on the cordless
telephone.
8 Modify the number.
9 Confirm with OK.
10 Select a category using [.
11 Confirm with OK.
EN
Deleting an Entry
Deleting and Closing
Notice
Navigating in the Menu
Use C to delete individual characters. Press ’
to close the menu and return to the starting
mode.
Saving Entry
Do Not Add to Device Entries
1 Hold m pressed (for at least two seconds).
2 Using [ select the entry which you would like to
delete.
3 Press ô Option.
4 Using [ select DELETE ENTRY.
5 Confirm with OK.
6 Confirm the deletion with ô Yes.
Notice
Restricted Telephone Book Functions
You can add entries to the telephone book of the
cordless telephone only.
Adding an Additional
Number
Additional Number
1 Hold m pressed (for at least two seconds).
2 Using [ select <New>.
3 Enter the name. You can enter characters using the
numeric keys (see key labels). Enter special characters
using 0 or #. Press and hold the respective key or
press it several times until the desired character appears
on the display.
4 Confirm with OK.
5 Enter the telephone number.
6 Confirm with OK.
7 Using [, select the category for which you would like
to enter a number: HOME, WORK, MOBILE or FAX.
8 Confirm with OK.
Edit Entry
Do not Edit Device Entries
Notice
Restricted Telephone Book Functions
You can edit the entries on the cordless telephone only.
Hold m pressed (for at least two seconds).
Using [ select the entry which you would like to edit.
Press ô Option.
Using [ select EDIT ENTRY.
Confirm with OK.
Modify the name. Use C to delete individual characters.
7 Confirm with OK.
1
2
3
4
5
6
Notice
Additional Number
If you have added an additional number to an
entry, this entry appears twice in the telephone
book. The symbol of the category appears before
the name.
1
2
3
4
5
6
7
8
9
Hold m pressed (for at least two seconds).
Using [ select the entry which you would like to edit.
Press ô Option.
Using [ select ADD NUMBER.
Confirm with OK.
Enter the additional number.
Confirm with OK.
Select a category using [.
Confirm with OK.
Changing the Ring Tone
Changing the Ring Tone
You can assign a separate ring tone to each entry. In this
way you can distinguish between business and personal
calls.
CLIP Prerequisite
Notice
Telephone Book of the Cordless Telephone · Saving Entry
Calling Line Identification (CLIP)
For this function to work, the Caller Line Identification (CLIP) must be activated for your telephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.
19
EN
1
2
3
4
5
6
7
Hold m pressed (for at least two seconds).
Using [ select the entry which you would like to edit.
Press ô Option.
Using [ select RINGER TYPE.
Confirm with OK.
Select the desired ring tone using [.
Confirm with OK.
Calling Options
Telephone Book Entries on the
Device
Press m.
Using [, dial the desired entry.
Press ô Option.
Select the desired option using [. You can have the
details of the entry displayed, call the number, send an
SMS to the number or search for some other entry.
5 Confirm with OK.
1
2
3
4
Telephone Book Entries of the
Cordless Telephone
Hold m pressed (for at least two seconds).
Using [, dial the desired entry.
Press ô Option.
Select the desired option using [. You can have the
details of the entry displayed, call the number, send an
SMS to the number, edit or delete the entry, assign a
special ring tone or add an additional number to the
entry, search for some other entry or save a new entry.
5 Confirm with OK.
1
2
3
4
20
Philips · PPF 650
7 Cordless Telephone
Looking for Cordless Telephone
No Actual Emergency Call Numbers
Notice
No Actual Emergency Call Numbers
It is recommended not to save any actual emergency call number (e.g. police or fire brigade)
with this function, so that you do not accidentally call this emergency call number.
Using the Search Function
This function helps you in locating cordless telephones,
which you have misplaced. For this purpose the cordless
telephones must be registered with the device and must be
within its range.
Press { on the device. All cordless telephones registered
with the device ring for approx. one minute.
Dect Look Up
Notice
Access Function
You can also call the function by pressing OK,
81 and OK.
Switching On and Off
You can switch your cordless telephone off to save power.
Press and hold ’ (at least two seconds) for switching off
the cordless telephone. Press and hold “ (at least two seconds) for switching on the cordless telephone.
Press [, and using [ to select SETTINGS.
Confirm with OK.
Using [ select SECURITY.
Confirm with OK.
Using [ select EMERGENCY.
Confirm with OK.
Press õ EDIT ENTRY.
Using [ select ACTIVATE to switch on the function. Using [ select DEACTIVATE to switch off the
function.
9 Confirm with OK.
1
2
3
4
5
6
7
8
Notice
Initial Activation
When you activate the function for the first
time, you must enter a number. This number
remains stored.
Navigating in the Menu
Navigating in the Menu
Press one of the two arrow keys [ to open the function
menu. Page through [ menu entries. Use OK to select a
menu function. Press C to return to the previous menu
level. Press ’ to close the menu and return to the starting
mode.
Keypad Lock
1
2
3
4
5
6
7
Press [, and using [ to select SETTINGS.
Confirm with OK.
Using [ select SECURITY.
Confirm with OK.
Using [ select KEYPAD LOCK.
Confirm with OK.
Using ô select Yes to switch on the function. Using
õ select No to switch on the function.
Activating Emergency Call
Number
Modifying the Emergency Call
Number
1 Press [, and using [ to select SETTINGS.
2 Confirm with OK.
3 Using [ select SECURITY.
4 Confirm with OK.
5 Using [ select EMERGENCY.
6 Confirm with OK.
7 Press õ EDIT ENTRY.
8 Using [ select CHANGE NO.
9 Confirm with OK.
10 Enter the telephone number.
11 Confirm with OK.
Emergency Call Number
Using this function you can save a number as an emergency call number. If the emergency call function is activated, the number is dialled as soon as “ is pressed. You
can dial and call other telephone numbers with the
numeric keypad.
Cordless Telephone · Looking for Cordless Telephone
21
EN
Additional Functions
Timer
Timer
Telephone Call at Alarm Time
Notice
Telephone Call at Alarm Time
If you place a call at a preset alarm time, the
cordless telephone rings after the call is terminated.
EN
Using the Timer function (countdown alarm) you can
enter a time, after which the cordless telephone rings. You
can set whether the remaining time should be shown on
the display. Press any key to switch off the alarm.
Timer
Notice
Telephone Call when Using Timer
Function
While the timer is running, you can talk on the
phone without interrupting the timer.
Back and Close
Notice
Navigating in the Menu
Press C to return to the previous menu level.
Press ’ to close the menu and return to the
starting mode.
Alarm
Alarm
The cordless telephone rings each day at the set time with
the selected ringer tone. Press any key to switch off the
alarm. If you would like to completely switch off the alarm,
you must deactivate the function.
Setting the Wake-up Alarm
1 Press [, and using [ to select ACCESSORIES.
2 Confirm with OK.
3 Using [ select ALARM.
4 Confirm with OK.
5 Press õ EDIT ENTRY.
6 Using [ select RINGER TYPE.
7 Confirm with OK.
8 Select the desired ring tone using [.
9 Confirm with OK.
10 Using [, set the volume.
11 Confirm with OK.
12 Using [ select SET TIME.
13 Confirm with OK.
14 Enter the time at which you would like to be woken up,
e.g. 07 00 for 7 a.m.
15 Confirm with OK.
16 Confirm with OK to switch on the alarm.
Deactivating the Alarm Clock
1
2
3
4
5
6
7
22
Press [, and using [ to select ACCESSORIES.
Confirm with OK.
Using [ select ALARM.
Confirm with OK.
Press õ EDIT ENTRY.
Using [ select DEACTIVATE.
Confirm with OK.
Setting the Timer
1 Press [, and using [ to select ACCESSORIES.
2 Confirm with OK.
3 Using [ select TIMER.
4 Confirm with OK.
5 Press õ EDIT ENTRY.
6 Using [ select SET DURATION.
7 Confirm with OK.
8 Enter the minutes (max. 99 minutes).
9 Confirm with OK.
10 Using [ select VIEW.
11 Confirm with OK.
12 Using ô select Yes to switch on the function. Using
õ select No to switch on the function.
13 Using [ select RINGER TYPE.
14 Confirm with OK.
15 Select the desired ring tone using [.
16 Confirm with OK.
17 Using [, set the volume.
18 Confirm with OK.
19 Press õ Return after carrying out all the settings.
20 Press ô Start to start the timer.
Modifying the Timer
Modifying the Timer
Before you can modify the timer settings, you must switch
off the current timer.
1 Press õ Stop.
2 You will be asked, whether you would like to switch off
the timer . Confirm with ô Yes.
You can now access the timer menu and modify settings.
Philips · PPF 650
Birthday Reminder
Deleting a Birthday
Birthday Reminder
1
2
3
4
5
Using the birthday reminder you can enter the dates for up
to ten birthdays. The cordless telephone rings at the
entered time on the entered date. Press any key to switch
off the alarm.
Entering a Birthday
1 Press [, and using [ to select ACCESSORIES.
2 Confirm with OK.
3 Using [ select BIRTHDAY.
4 Confirm with OK.
5 Using [ select <New>.
6 Confirm with OK.
7 Enter the name.
8 Confirm with OK.
9 Enter the birth day, e.g. 08 06 for 8th June.
10 Confirm with OK.
11 Enter the time, e.g. 14 00 for 2 pm.
12 Confirm with OK.
Displaying a Birthday
Press [, and using [ to select ACCESSORIES.
Confirm with OK.
Using [ select BIRTHDAY.
Confirm with OK.
Using [ select the entry which you would like to be
displayed.
6 Confirm with OK. Name, date and time of the birthday reminder are displayed.
7 End the function using ’.
1
2
3
4
5
Modifying a Birthday
Press [, and using [ to select ACCESSORIES.
Confirm with OK.
Using [ select BIRTHDAY.
Confirm with OK.
Using [ select the entry which you would like to
modify.
6 Press ô Option.
7 Using [ select EDIT ENTRY.
8 Confirm with OK.
9 Modify the name. Use C to delete individual characters.
10 Confirm with OK.
11 Modify the date.
12 Confirm with OK.
13 Modify the time.
14 Confirm with OK.
1
2
3
4
5
Cordless Telephone · Additional Functions
6
7
8
9
Press [, and using [ to select ACCESSORIES.
Confirm with OK.
Using [ select BIRTHDAY.
Confirm with OK.
Using [ select the entry which you would like to
delete.
Press ô Option.
Using [ select DELETE ENTRY.
Confirm with OK.
Confirm the deletion with ô Yes.
Changing the Ring Tone
Changing the Ring Tone
You can assign a separate ring tone to each birthday
reminder.
1 Press [, and using [ to select ACCESSORIES.
2 Confirm with OK.
3 Using [ select BIRTHDAY.
4 Confirm with OK.
5 Using [ select the entry to which you would like to
assign a new ring tone.
6 Press ô Option.
7 Using [ select RINGER TYPE.
8 Confirm with OK.
9 Select the desired ring tone using [.
10 Confirm with OK.
11 Using [, set the volume.
12 Confirm with OK.
Acoustic Room Monitoring
Function Only Available with Several Cordless Telephones Registered to the device
Notice
Function Only Available with Several
Cordless Telephones Registered to the
device
This function is available only if you have registered several cordless telephones with your
device and the telephones are within the range of
the device.
Room Monitoring
With this function you can acoustically "monitor" a room
(for example, a children's bedroom).
23
EN
Setting up Room Monitoring
EN
Set up the room monitoring on the receiver unit first.
1 On the receiver unit, press [, and using [ select
ACCESSORIES.
2 Confirm with OK.
3 Using [ select ROOM MONITOR..
4 Confirm with OK.
5 Using [ select the transmitting cordless telephone.
6 Press ô Call.
7 The transmitting unit starts ringing. Press OK to
accept the call.
8 Using ô Yes activate the baby-phone function on
the transmitting unit.
The cordless telephones are now connected to each other
in the monitoring mode. Place the transmitting unit in the
room which you would like to acoustically monitor. Keep
the receiver unit with you.
Room Monitoring
Notice
Telephone Calls During Room Monitoring
If you get a call when you are in the room monitoring mode, only the device rings. On the
cordless telephone, the display gets lit up and a
message appears.
Telephone Calls During Room Monitoring
If you get a call when you are in the room monitoring
mode, only the device rings. On the cordless telephone, the
display gets lit up and a message appears.
1 Press ô ACCEPT on the cordless telephone to accept
the call.
2 Press ’ to end the call. The cordless telephone returns
to the room monitoring mode.
You can place a call when in the room monitoring mode.
1 Press ô Call and dial the desired number.
2 Press “ to make the connection.
3 Press ’ to end the call. The cordless telephone returns
to the room monitoring mode.
Ending Room Monitoring
Press ’ on any one of the cordless telephones to end the
room monitoring mode.
24
Philips · PPF 650
8 Fax
cial features), RESOL.: FINE (for texts with small
print or drawings) and RESOL.: PHOTO (for photos). Press ã. The configured resolution appears on
the display. Press ã again to change the resolution.
Help 4 · Fax
Notice
Printing Informations for Fax Transmission
Press i and 4 to print instructions for sending fax messages and for configuring the fax
switch.
Notice
Setting the Contrast
They can adjust the preset contrast (also see
Chapter Settings, page 35).
Unsuitable Documents!
CAUTION!
Unsuitable Documents!
Do not insert any documents into the device
that ...
... are wet, have been edited with correction
fluid, are soiled or have a coated surface.
… that are written on with a soft pencil, with
paint, chalk or charcoal.
… originate from newspapers or magazines
(printing ink).
… that are held together with office or notebook
staples or with tape or glue.
… are pasted with note papers.
… are creased, crumpled or torn.
3 Dial the desired number. There are several ways to do
this:
4 Press START.
Busy Number
Notice
Automatic Redial
If the subscriber is busy, the device dials the
number again after some time. Press STOP, in
order to cancel the transmission process. After
the transmission, the device prints out a transmission report depending on the settings.
Manual Dialling: Dial the desired number using the
numeric keypad.
Recalling Short Dial Number
Notice
10 Documents · A5/A4
Access Function
You can also load short dial entries by holding
the respective number key pressed (for at least
two seconds).
Use documents with sizes A5 or A4 with 60 to 100 g/m2
weight. You can insert up to ten documents at a time.
Fax
Notice
Cancel Transmission
Press STOP to eject the documents without
sending them.
Telephone Book:
1 Press ma.
Notice
Sending fax
Access Function
You can also search for an entry in the telephone book by pressing OK, 11 and
OK.
1 Insert the documents face up into the document feeder.
The top most document will be fed in first.
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the telephone book.
Notice
Multiple Categories for One Entry
You can save an entry multiple times with
the same name but in a different category. In
the telephone book, the first letter of the category appears after the entry.
Redial List
Redial List: Press @. Use [ to select an entry from the
list of the dialled numbers.
Outgoing Calls
Notice
2 Set the desired resolution. You can choose between
RESOL.: STANDARD (for documents without speFax · Sending fax
Access Function
You can also load the redial list by pressing OK,
22 and OK.
25
EN
Caller List: Press and hold @ (at least two seconds).
Use the [ to select an entry from the list of callers.
Calls Received
Notice
Eavesdropping while Connection is Established
Eavesdropping while Connection is Established
Access Function
You can also load the caller list by pressing OK,
21 and OK.
EN
CLIP Prerequisite
You can listen while a connection is established, for example if a fax transmission constantly fails.
Enter the desired number using the numeric keypad or
select a saved entry. Press ß.
No Hands-free Operation Possible
Notice
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Identification (CLIP) must be activated for your telephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.
Sending Fax Manually
No Hands-free Operation Possible
Hands-free operation is not possible with this
function. You cannot answer if the subscriber
picks up.
Sending to Multiple Recipients (= Broadcasting)
Broadcast Transmissions
1 Insert the document.
2 Enter the desired number using the numeric keypad or
select a saved entry.
3 Press ß.
4 Press START.
You can send one fax to multiple recipients in succession.
Entering Recipients Individually
You can combine and edit manually entered digits and saved
entries, before the dialling process starts. If you have saved, for
example, the telephone number prefix of an inexpensive telephone service provider (call-by-call) as a telephone book entry,
select this entry and manually enter the subsequent telephone
number or select another saved entry.
1 Insert the document.
2 Press OK, 34 and OK. The document is now
read.
3 Enter the desired number using the numeric keypad or
select a saved entry.
4 Confirm with OK.
5 Enter the next telephone numbers.
6 Confirm with OK. You can enter up to 25 recipients.
7 Press START. The device transmits the fax message
successively to all recipients.
Insert Dialling Pause
Sending a Fax to a Group
Chain Dialling
It may be necessary to insert a dial pause in telephone
number, for example, for a direct-inward dialling number,
a sub-address or in a long distance number. Hold R
pressed (for at least two seconds). – appears on the display.
The second part of the number is dialled only after a short
pause.
Direct Inward Dialling or
Selecting Sub-address
Direct Inward Dialling or Sub-address
You can send a fax to a direct-inward dialling number or a
sub addressor or call from a direct-inward dialling number
or sub address - for example to use a certain service of a fax
database provider. For this purpose, attach the directinward dialling number or sub address with a short dialling
pause to the fax number.
1 Enter the desired number using the numeric keypad or
select a saved entry.
2 Hold R pressed (for at least two seconds).
3 Enter the direct-inward dialling number or sub address.
4 Press START. The direct-inward dialling number or
sub address is dialled only after a short pause.
26
1 Insert the document.
2 Press OK, 13 and OK.
3 Use [ to select the group to which you would like to
send a fax.
4 Confirm with OK.
5 Using [ select SEND FAX?.
6 Confirm with OK.
Transmission to Multiple Recipients
Notice
Transmission to Multiple Recipients
If your device cannot reach a recipient, the fax
message is sent to the other recipients. After the
device has called all recipients, it once again dials
the numbers that previously could not be
reached.
Philips · PPF 650
Sending Fax Later
Polling Faxes
Sending Fax Later
Fax Polling
If you would like to make use of the lower telephone tariffs
or if the recipient can be reached at some specific time
only, you can send the fax at a later time—within 24 hours.
1 Insert the document.
2 Press OK, 33 and OK.
3 Enter the time, at which the document should be transmitted, e.g. 14 00 for 2 pm.
4 Confirm with OK.
5 Enter the desired number using the numeric keypad or
select a saved entry.
6 Selecting a Saved Entry: Confirm the selected
entry using OK.
7 Press START. The device goes into standby mode and
transmits the fax at the entered time. You can continue
to make telephone calls and receive faxes
With the fax polling function, you can retrieve faxes that
lie ready in the dialled device. You can keep a document
ready in your device, which can be polled by others.
Sending Fax Later
Notice
Cancel a Scheduled Fax Transmission
Press STOP to eject the document. This interrupts the standby mode.
Fax Reception
1 Enter the desired number using the numeric keypad or
select a saved entry.
2 Hold START pressed (for at least two seconds).
Polling Secure Faxes
Secure Fax Polling
With this function, you can poll faxes that are protected
with a code.
1 Press OK, 31 and OK.
2 Enter the code.
3 Confirm with OK.
4 Enter the desired number using the numeric keypad or
select a saved entry.
5 Press START.
Polling Send of Faxes
Unauthorised Fax Polling!
CAUTION!
Fax Reception
If you have not changed the factory settings, received faxes
will be printed out automatically. If no paper or no ink
film is inserted, the device saves the incoming faxes. The
ä key blinks. Once paper or a new ink film is
inserted, the saved faxes are printed out.
Paper Not Inserted Correctly
Notice
Paper Not Inserted Correctly
Check if you have inserted clamped paper correctly. The lever on the right hand side next to
the paper feeder must be folded backwards.
Message Memory Full
If the message memory is full, no additional messages can
be received. A warning appears on the display. Follow the
specifications in the technical data.
Unauthorised Fax Polling!
Protect your document against unauthorised
polling with a code.
Secure Fax Polling
A caller who knows the code can poll the fax from your
device. You can continue to make telephone calls and
receive faxes
1 Insert the document.
2 Press OK, 32 and OK.
3 Enter a code (max. 20 characters).
4 Confirm with OK.
Sending Fax Later
Notice
Cancel a Scheduled Fax Transmission
Press STOP to eject the document. This interrupts the standby mode.
Delete Fax Memory Service Code
Notice
Delete Fax Messages Sent
If there are problems with printing out saved fax
messages, a service code is available (see also section Service, page 48).
Receiving Fax Manually
Select manual reception under number of rings of the fax
switch (see Chapter Setting the Fax Switch, page 36). The
device will not receive faxes on its own. This setting is useful, when you want to receive faxes via a modem connected
to a computer.
You can start fax reception manually, by pressing
START.
Receiving Fax Manually
Fax · Sending Fax Later
EN
Polling Faxes Directly
Using Fax Templates
Fax Templates
Five fax templates, which you can use, are stored in your
device. With these templates you can quickly create, for
example, a short fax note or an invitation.
1 Press OK, 43 and OK.
2 Use [ to select the template you would like to print.
3 Confirm with OK. The device prints the template.
4 Fill the template and send it to the desired recipient per
fax.
27
9 Copier
Making a Copy
Help 5 · Copier
Notice
Printing Informations for Copying
Press i and 5 to print the help for copying.
EN
10 Documents · A5/A4
Use documents with sizes A5 or A4 with 60 to 100 g/m2
weight. You can insert up to ten documents at a time.
Inserting Documents
1 Insert the documents face up into the document feeder.
The top most document will be fed in first.
Press COPY briefly. The copy is created.
Creating Multiple Copies
1 Hold COPY pressed (for at least two seconds).
2 Enter the number of times you would like to copy the
document (maximum of 15 copies).
3 Press COPY.
4 Using [ select whether to reduce or enlarge the document in size when copying. You can magnify up to
200 percent or reduce to as small as 50 percent of the
original size.
5 Confirm with OK. The copy is created.
Copier
Notice
Cancel Copying
Press STOP to eject the documents without
copying them.
2 Set the desired resolution. You can choose between
RESOL.: STANDARD (for documents without special features), RESOL.: FINE (for texts with small
print or drawings) and RESOL.: PHOTO (for photos). Press ã. The configured resolution appears on
the display. Press ã again to change the resolution.
Notice
Setting the Contrast
They can adjust the preset contrast (also see
Chapter Settings, page 35).
28
Philips · PPF 650
10 SMS
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
Notice
SMS Templates
The last five SMS messages written remain
saved as templates. Press @ until the
desired message appears.
Help 8 · SMS
Notice
Printing Instructions for SMS Functions
Press i and 8 to print the instructions for
SMS functions.
SMS Requirements
CLIP for SMS
Your device is preset for using the SMS (Short Messaging
Service) services. Caller Line Identification (CLIP) must be
activated for the SMS to work. It is possible that you will
not be able to send and receive SMS messages from a private branch exchange (depending on the country and network).
3 You can enter characters using the numeric keys (see
button labels). Press 0 to enter space or special characters.
You can enter 160 characters.
Notice
Navigating and Printing
You can move the cursor using [. Use C to
delete individual characters. Press and hold
C (at least two seconds) to delete the entire
text. Press COPY to print the message
before sending it.
SMS with Secret Number
Notice
SMS with Secret Number
Should you face problems in sending SMS, the
reason for the same could be that you are using
a secret number or that the device is connected
to an old ISDN System.
4 Confirm with OK.
5 Enter the desired number using the numeric keypad or
select a saved entry.
Notice
SMS Requirements
Notice
SMS Requirements
Ask your telephone service provider ...
... whether you must register for the SMS Service.
... to which mobile telephone service providers
you can send SMS
... which costs are applicable.
... which functions are available.
Sending to Multiple Recipients (=
Broadcasting)
You can send an SMS message to up to five
recipients. Press OK after entering the
number.
6 Press _. The message is sent.
On the Cordless Telephone
Sending SMS
Navigating, Deleting and Back
Sending SMS
SMS in Ireland
Notice
SMS in Ireland
In Ireland, some providers will only accept SMS
messages with a 140 character limit.
On the device
1 Press _.
2 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 61 and OK.
SMS · SMS Requirements
Notice
Navigating in the Menu
You can navigate within the text using [. Use
C to delete individual characters. Press ’ to
close the menu and return to the starting mode.
1 Press _.
Notice
Access Function
You can also call the function by pressing [
and selecting using [ SMS. Confirm with
OK.
2 Using [ select SEND SMS.
3 Confirm with OK.
4 You can enter characters using the numeric keys (see
key labels). Enter space or special characters using 0
or # Press and hold the respective key or press it several times until the desired character appears on the display.
29
EN
You can enter 160 characters.
Notice
Enter Letters
Switch the keyboard to enter capital or small
letters: Press ô Select. Using [ select
whether you would like to enter capital or
small letters. Confirm with OK. Press and
hold * (at least two seconds) to toggle
between capital and small letters.
Press ô Select. Using [ select
INSERT CHAR. to enter a character. Confirm with OK.
Press ô Select. Using [ select CANCEL to delete the entire text. Confirm with
OK. Confirm the deletion with ô Yes.
EN
6 Enter the e-mail address. Press and hold 0 until the
@ character appears.
Notice
Enter E-Mail Addresses
E-Mail addresses must not contain a space.
7 Confirm with OK.
8 Press ô Confirm to send the message. Press õ
EDIT ENTRY to edit the message again.
SMS Messages to Fax
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
You can send an SMS as a fax to a fax machine.
1 Press _.
5 Confirm with OK.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Confirm with OK.
8 Press ô Confirm to send the message. Press õ
EDIT ENTRY to edit the message again.
Notice
Saving SMS Message
After sending you can save the SMS. Using
ô select Yes to save the message. Press õ
No to delete the message.
Sending SMS from the Telephone Book
You can select an entry from the telephone book and then
call the SMS menu.
1 Short press m to call up the telephone book of the
device. Long press m (at least two seconds) to call up
the telephone book of the cordless telephone.
2 Using [, dial the desired entry.
3 Press ô Option.
4 Using [ select SEND SMS.
5 Confirm with OK. The Send SMS Menu appears.
SMS Messages to E-Mail
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
You can send an SMS to an E-Mail address.
1 Press _.
Notice
Access Function
You can also call the function by pressing [
and selecting using [ SMS. Confirm with
OK.
2
3
4
5
30
Using [ select EDIT EMAIL.
Confirm with OK.
Enter the text as described under Sending SMS.
Confirm with OK.
Notice
Access Function
You can also call the function by pressing [
and selecting using [ SMS. Confirm with
OK.
Using [ select EDIT FAX.
Confirm with OK.
Enter the text as described under Sending SMS.
Confirm with OK.
Enter the desired number using the numeric keypad or
select a saved entry.
7 Confirm with OK.
8 You can give a title (=¦reference) which appears in the
heading of the fax.
9 Press ô Confirm to send the message. Press õ
EDIT ENTRY to edit the message again.
2
3
4
5
6
Notification by SMS
SMS Notification
You can have an SMS message sent to a telephone number
of your choice when faxes or SMS messages are received or
the answering machine receives calls or voice messages in
your absence.
1 Press OK, 65 and OK.
2 Use [ to select whether you would like to be
informed about new SMS messages.
3 Confirm with OK.
4 Use [ to select whether you would like to be
informed about calls in your absence.
5 Confirm with OK.
6 Use [ to select whether you would like to be
informed about new fax messages.
7 Confirm with OK.
8 Use [ to select whether you would like to be
informed about new messages on the answering
machine.
9 Confirm with OK.
Philips · PPF 650
10 Enter the number to which the SMS should be sent.
11 Confirm with OK. A message appears on the display
stating the notification by SMS is activated.
Receiving SMS Messages
On the Cordless Telephone
Reading SMS Messages
1 Press _.
EN
Notice
Receiving
Paper
Notan
Inserted
SMS on
Correctly
the Device
Access Function
You can also call the function by pressing [
and selecting using [ SMS. Confirm with
OK.
Notice
Paper Not Inserted Correctly
Check if you have inserted clamped paper correctly. The lever on the right hand side next to
the paper feeder must be folded backwards.
SMS Reception
Received SMS messages are printed out automatically. If
you have turned the automatic printing function off, the
SMS messages will be stored. Your device can store up to
30 SMSs.
Reading SMS Messages
On the Device
Reading New SMS
Reading an SMS on the Device
After reception of a new SMS message, the ä key
lights up.
1 Press ä.
2 Select the SMS using [.
3 Press ä. The Read SMS menu opens.
2 Using [ select READ SMS.
3 Confirm with OK.
4 Select the desired message memory using [. The
number of the messages contained in the folder is given
in brackets.
NEW—Contains new messages
INBOX—Contains read and saved message.
SENT—Contains sent messages that you have saved.
DRAFT—Contains message that are yet to be sent
5 Confirm with OK.
6 Select the desired SMS using [.
7 Press ô Select.
8 Using [ select READ.
9 Confirm with OK.
Notice
Call Additional Functions
Press ô Select to call additional SMS
functions.
Loading Previously Read SMS Messages
1 Press OK, 62 and OK.
2 Using [ select the SMS that you would like to read.
Unread SMS messages are marked with a *.
3 Confirm with OK.
Notice
Navigating and Printing
You can move the cursor using [. Press
COPY to print the SMS message.
4 Press STOP to return to the SMS list.
Notice
Calling Further SMS Functions
Press OK to call additional SMS functions.
SMS · Receiving SMS Messages
Modifying the Read Mode
Modifying the Read Mode
You can display an SMS in different ways.
1 Select the SMS to Read.
2 Press ô Select.
3 Using [ select SMS MODE.
4 Using [, select the desired mode:
AUTO SCROLL—The text scrolls automatically.
MANUAL SCROLL—Using [ you can navigate
within the text.
2 LINES—Two rows of the text are displayed.
5 Confirm with OK.
31
EN
Calling SMS Functions
Deleting SMS Messages
On the Device
On the Device
SMS Functions on the Device
Deleting
SMS
Deletion
an SMS
Introduction
on the Device
1 While reading an SMS message, press OK to load additional SMS functions.
2 Use [ to select an option: You can display information about the SMS message, print or delete the message, forward the message to another recipient or send
an SMS response. You can return to the list of SMS
messages, or view the next or previous SMS message.
3 Confirm with OK.
If the message memory is full, the device cannot receive
any more messages. Delete SMS messages to free up memory.
1 Press OK, 64 and OK.
2 Use [ to select the SMS messages you would like to
delete:
DELETE: ALL SMS—Deletes all received and composed SMS messages that you have saved
DELETE: READ SMS—Deletes all read SMS messages
DELETE: SENT SMS—Deletes all sent SMS messages that you have saved
3 Confirm with OK.
4 Confirm the deletion with OK.
On the Cordless Telephone
1 Select the SMS to Read.
2 Press ô Select.
3 Use [ to select an option: You can reply the SMS.
You can move the message to the Archive folder, delete
it or forward it to some other recipient. You can call the
number of the sender or save it to the telephone book.
4 Confirm with OK.
Notice
Deleting Single SMS Message
If you would like to delete an individual SMS
message, load the message. Press OK, and
using [ to select DELETE. Confirm with
OK.
SMS in Ireland
Notice
SMS in Ireland
Some providers do not include the entire telephone number of the SMS sender. In such cases
a direct response to the SMS message will not be
delivered. Instead, create a new SMS message.
Pay attention when entering the area code.
Printing SMS Messages
Printing an SMS on the Device
1 Press OK, 63 and OK.
2 Using [ select the SMS message you would like to
print.
PRINT: ALL—Prints all received and composed
SMS messages that you have saved
PRINT: INBOX—Prints all received SMS messages
PRINT: OUTBOX—Prints all sent SMS messages
that you have saved
PRINT: NEW—Prints all unread SMS messages
3 Confirm with OK.
On the Cordless Telephone
Deleting Individual SMS
1
2
3
4
5
Emptying the Message Folder
Emptying the Message Folder
CAUTION!
Messages are Deleted!
This function deletes all SMS messages in a message folder.
1 Press _.
Notice
Notice
Printing an Individual SMS message
If you would like to print an individual SMS
message, load the message. Press COPY to
print the message.
Access Function
You can also call the function by pressing [
and selecting using [ SMS. Confirm with
OK.
2
3
4
5
6
32
Select the SMS to Read.
Press ô Select.
Using [ select DELETE ENTRY.
Confirm with OK.
Confirm the deletion with ô Yes.
Using [ select DELETE SMS.
Confirm with OK.
Select the folder you would like to clear using [.
Confirm with OK.
Confirm the deletion with ô Yes.
Philips · PPF 650
Modifying the Settings
Switching SMS Reception On and Off
Switching SMS Reception Off
Available Only on the Device
Notice
Available Only on the Device
These functions are available only on the device.
Changing Transmitting and
Receiving Numbers
Send and Receive Numbers
All numbers that you need to send and receive SMSs are
stored in your device. In case you moved to another telephone service provider, you must change these numbers.
You can set your device for two SMS service providers.
1 Press OK, 66 and OK.
2 Use [ to select the SMS service provider that you
would like to set.
3 Confirm with OK.
4 Enter the number for sending SMSs.
5 Confirm with OK.
6 Enter the number for receiving SMSs.
7 Confirm with OK.
8 Use [ to select the SMS service provider through
which you would like to send SMSs.
9 Confirm with OK.
Notice
Receiving SMS Messages
You can receive SMS messages via both providers.
Turning Off the Automatic Printing
Automatic Printing
You can deactivate the automatic printing of SMS messages.
1 Press OK, 66 then OK repeatedly until PRINT
SMS: YES appears on the display.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
SMS · Modifying the Settings
If you are using a cordless telephone with SMS function on
the same telephone line, then the specific device at which
you will receive an SMS message will depend on the specific manufacturer. Only one of the devices will receive the
SMS message. Try to turn off the SMS reception on your
cordless telephone. If this is not possible, switch off SMS
reception on the device. You can continue to send SMS
messages even while SMS reception is switched off.
Switching SMS Reception Off
1
2
3
4
5
Press OK, 45 and OK.
Enter the service code 31207.
Confirm with OK.
Using [ select SURE: YES.
Confirm with OK.
Notice
Cancelling Entry
If you have entered the incorrect code, you
can cancel the entry with SURE: NO.
Switching SMS Reception On
1
2
3
4
5
Press OK, 45 and OK.
Enter the service code 41206.
Confirm with OK.
Using [ select SURE: YES.
Confirm with OK.
Notice
Cancelling Entry
If you have entered the incorrect code, you
can cancel the entry with SURE: NO.
33
EN
11 Fun and Games
Printing the Solution
Help 7 Games and Fun
Notice
Printing informations for the Games
and Fun functions
Press i and 7 to print the instructions for
the Games and Fun functions of your device.
EN
Sudoku
Sudoku
Sudoku is a Japanese number puzzle. The game has 3 × 3
squares divided into 3 × 3 fields. Depending on the difficulty level, lesser or more digits are already given at the
beginning of the game. The aim of the game is to fill digits
from 1 to 9 in the game field is such a way that each digit
appears only once in a row, a column and each of the nine
blocks. There is only one solution.
Last Solution Available
Notice
Last Solution Available
The solution of the last printed game is saved.
The solutions of earlier games are no longer
available.
Printing a Game
Press OK, 48 and OK.
Using [ select SUDOKU:NEW.
Confirm with OK.
Using [ select the difficulty level.
Confirm with OK.
Enter, how many copies of the Sudoku you would like
to print (maximum 9 copies).
7 Confirm with OK.
8 Using [ select if you would like to print the solution.
9 Confirm with OK.
1
2
3
4
5
6
1 Press OK, 48 and OK.
2 Using [ select SUDOKU:SOLUTION.
3 Confirm with OK.
Sudoku for Every Day
Sudoku for Every Day
You can have a new Sudoku automatically printed each
day.
1 Press OK, 48 and OK.
2 Using [ select SUDOKU:AUTO.
3 Confirm with OK.
4 Enter the time, e.g. 14 00 for 2 pm.
5 Confirm with OK.
6 Using [ select the difficulty level.
7 Confirm with OK.
8 Enter, how many copies of the Sudoku you would like
to print (maximum 9 copies).
9 Confirm with OK.
10 Using [ select if you would like to print the solution.
11 Confirm with OK.
12 Using [ indicate whether you would like to turn
printing on or off.
13 Confirm with OK.
Sudoku for Every Day
Notice
Switching Off Function
You can turn off the daily Sudoku print by
selecting the function as described above and by
switching off the automatic printing under
point 12.
Printing the Last Game Again
Press OK, 48 and OK.
Using [ select SUDOKU:LAST.
Confirm with OK.
Enter, how many copies of the Sudoku you would like
to print (maximum 9 copies).
5 Confirm with OK.
6 Using [ select if you would like to print the solution.
7 Confirm with OK.
1
2
3
4
34
Philips · PPF 650
12 Settings on the Device
Entering Number
Cursor Navigation 1
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters. Press STOP to
close the menu and return to the starting mode.
Entering the Date and Time
1 Press OK, 91 and OK.
2 Enter the time, e.g. 14 00 for 2 pm.
3 Enter the date (two digits for each field), for example
08 06 27 for June 8th, 2027.
4 Confirm with OK.
Time and Date After a Short Power Failure
Notice
Time and Date After a Short Power
Failure
You must check the time and date after a short
power failure. Confirm with OK.
Selecting the Language
1 Press OK, 92 and OK.
2 Use [ to select the desired display language.
3 Confirm with OK.
Selecting the Country
Setting the Country Correctly
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your device is not
adapted to the telephone network. If your country is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
Page Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
1 Press OK, 94 and OK.
2 Enter your number. Using # or * you can enter a
plus sign.
3 Confirm with OK.
Entering Your Name
1 Press OK, 95 and OK.
2 Enter your name. You can enter characters using the
numeric keys (see button labels). Enter special characters using 0. Press the respective key several times
until the desired character or special character appears
on the display.
3 Confirm using OK.
Setting the Contrast
Setting the Contrast
For copying and printing of fax messages, you can select
different contrast levels.
1 Press OK, 44 and OK.
2 Using [, select the desired contrast:
CONTR.:LIGHT—For brighter copies and fax transmission
CONTR.:NEUTRAL—For all types of originals (for
example white text on black background or documents
with coloured background)
CONTR.:OPTIMISED (Factory settings)—Optimized adaptation for text and photo printing
CONTR.:DARK—For darker copies and fax transmission (for example documents with faint printing)
3 Confirm with OK.
Modifying the Basic Settings
Notice
Reset When Setting the Country
CAUTION!
Settings will be Deleted!
When you select a new country, all settings are
reset to the factory defaults for that country.
Saved data remains intact. Check the number
entered for the header.
Modifying the Basic Settings
The changed settings are stored as new default
settings. If you select a special function for a
one-time process, take care to restore the default
settings or factory settings after that.
1 Press OK, 93 and OK.
2 Use [ to select the country in which you are operating the device.
3 Confirm with OK.
4 Using [ select SURE: YES.
5 Confirm with OK.
Settings on the Device · Entering the Date and Time
35
EN
Reducing Transmission
Speed
Reducing Transmission Speed
EN
The device adapts the transmission speed to the line quality. This may take some time, especially for overseas connections. Set a lower transmission speed if you are sending
faxes into networks with poor line quality.
1 Press OK, 38 and OK.
2 Use [ to set whether you would like to use a lower
transmission speed.
3 Confirm with OK.
Switching Page Adjustment
On and Off
Page Adjustment
In order that no information is lost, received faxes are
reduced in size when printed.
1 Press OK, 37 and OK.
2 Use [ to select whether you would like to switch size
reduction on or off.
3 Confirm with OK.
Setting the Ring Tones
Selecting the Ring Tone
Ring Tones
You can select from among ten different ring tones.
1 Press OK, 55 and OK.
2 Use the number keys 0 to 9 to select a ring tone.
Using [, set the volume.
3 Confirm with OK.
Adjusting Volume Level
Setting the Ring Tone Volume
You can adjust the volume of the ring tone when the device
is ringing or when you set the ring tone. You can save different volumes for the ™ (day) and ˜ (night) modes, (also
see Chapter Fax Switch).
Using [ you can set adjust the volume when the device
is ringing.
Setting the Volume on the Device
Setting the Day Mode
1 Press OK, 51 and OK.
2 Use [ to select the total number of rings. The device
stops the ring after these total number of rings and
accepts a call or a possible silent fax.
3 Confirm with OK.
4 Use [ to select the number of rings for the fax switch.
After the number of rings, the fax switch switches on
and distinguishes between fax transmissions and telephone calls. While the device is checking the call, it
continues to ring.
5 Confirm with OK.
6 Using [, set the volume.
7 Confirm with OK.
Setting the Night Mode
1 Press OK, 52 and OK.
2 Configure the same settings as for the day mode (see
steps 2 to 7).
Setting the Timer
Timer
The timer switches between the modes ™ (day) and ˜
(night) at the configured times.
1 Press OK, 53 and OK.
2 Enter the time at which the device should switch to ™
(day) mode, for example 06 00 for 6 o'clock
a.m.
3 Confirm with OK.
4 Enter the time at which the device should switch to ˜
(day) mode, for example 22 00 for 2 o'clock
a.m.
5 Confirm with OK.
Special Settings
Silent Fax Reception
If you would like to accept a fax without preceding rings,
set the number of rings of the fax switch to 0.
Switching Off All Rings
All Rings Off
Setting the Fax Switch
Fax Switch
The built-in fax switch of your device distinguishes
between fax messages and telephone calls. Faxes are automatically received, telephone calls can be received—even
on additionally connected devices. While the device is
checking the call, it continues to ring.
You can set how often the device should ring before picking up separately for the modes ™ (day) and ˜ (night). This
makes it possible for you to receive faxes silently at night
without getting disturbed.
Press ¼/º/» to switch between day and night mode.
With the activated timer ›, the device switches between
the modes ™ (day) and ˜ (night) at the configured times.
Day and Night Mode
36
If you don't want to be disturbed, e.g. in the night, by any
incoming calls, you can set the number of rings to 0. The
device switches immediately to silent fax reception.
Printing Lists and Help Pages
Printing Numbers and Entries
List of Numbers
The list of numbers and entries contains the last ten calls
received and numbers dialled as well as the saved entries
and groups.
Press OK, 23 and OK. The list is printed.
Philips · PPF 650
Printing Call Log
Printing Help Pages
Call Log
The call log contains the last 50 dialled numbers.
1 Press OK, 41 and OK.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
4 Switch on printing: Use [, to select whether the
call list should be printed immediately or after every 50
calls.
5 Confirm with OK.
Printing the Telephone Book
Press OK, 17 and OK. The device prints a list with
the telephone book entries and saved assignments.
Printing Fax Journal
Fax Journal
The fax journal is a list of the last ten faxes sent and
received.
1 Press OK, 35 and OK.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
4 Switch on printing: Use [, to select whether the
fax journal should be printed immediately or after every
ten transmissions.
5 Confirm with OK.
Printing Transmission Report
Printing Transmission Report
After every transmission, the device prints out a transmission report. If a transmission error occurs, an error report
is printed out. You can switch off printing of the transmission report.
1 Press OK, 36 and OK.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
Settings on the Device · Starting Initial Installation
Help 1 · Overview
Press i and 1 to print an overview of the help pages.
EN
Help 3 · Telephone Book
Press i and 3 to print an overview of the telephone
book functions.
Help 4 · Fax Transmission
Press i and 4 to print instructions for sending fax messages and for configuring the fax switch.
Help 5 · Copier
Press i and 5 to print the help for copying.
Help 6 · Function List
Press i and 6 to print a list of all functions and settings
of your device.
Help 7 · Games and Fun
Press i and 7 to print the instructions for the Games
and Fun functions of your device.
Help 8 · SMS
Press i and 8 to print the instructions for SMS functions.
Starting Initial Installation
1 Press i and 2.
2 The device prints out a help page and starts the initial
installation process.
37
13 Settings on the Cordless Telephone
Back and Close
Notice
Navigating in the Menu
Press C to return to the previous menu level.
Press ’ to close the menu and return to the
starting mode.
EN
Selecting the Language
Selecting the Language
Your cordless telephone automatically adopts the language
setting of the device during registration. You can set a different language for the display of the cordless telephone.
All languages are not available on the cordless telephone.
Adopting the Language Setting
Notice
Adopting the Language Setting
The cordless telephone adopts the language setting of the device when you change it on the
device (also see Chapter Settings on the device,
Page 35)
1
2
3
4
5
6
7
Press [, and using [ to select SETTINGS.
Confirm with OK.
Using [ select LANGUAGE.
Confirm with OK.
Press õ EDIT ENTRY.
Use [ to select the desired display language.
Confirm with OK.
6 Confirm with OK.
7 Press õ EDIT ENTRY to switch the function on/off.
8 Confirm with OK.
Switching Silent Mode On/
Off
Silent Mode
In the silent mode, all ring tones, alarm tones and key
tones of the cordless telephone are turned off. However,
you can still place a call.
1 Press [, and using [ to select RINGER TYPE.
2 Confirm with OK.
3 Using [ select SILENT MODE.
4 Confirm with OK.
5 Using ô select Yes to switch on the function. Using
õ select No to switch on the function.
Programmable Keys
Programmable Keys
Your cordless telephone has two programmable keys õ and
ô, to which you can assign functions for the quick access.
The selected functions appear as display text at the lower
edge of the display.
Press õ and/or ô to access the function. You can assign
the answering machine functions, silent mode, alarm
clock, timer, keypad lock, number (= specific telephone
number) or redialling to the keys.
Setting the Ring Tones
Programming the Keys
1 Press [, and using [ to select RINGER TYPE.
2 Confirm with OK.
3 Using [ indicate, whether you would like to set the
ring tone for internal or external calls.
4 Confirm with OK.
5 Select the desired ring tone using [.
6 Confirm with OK.
7 Using [, set the volume.
8 Confirm with OK.
1
2
3
4
5
Turning Key-Tones and Signal-Tones On and Off
1
2
3
4
5
38
Press [, and using [ to select RINGER TYPE.
Confirm with OK.
Using [ select BEEPS.
Confirm with OK.
Using [, select whether you would like to turn the
key-tones, the notification tone for low battery charge
or the confirmation tone when replacing the cordless
telephone in the charging station on or off.
Press [, and using [ to select SETTINGS.
Confirm with OK.
Using [ select PROGRAM KEYS.
Confirm with OK.
Press õ EDIT ENTRY to assign a function to the left
programmable key.
6 Select the desired function using [.
7 Confirm with OK.
8 Press õ EDIT ENTRY to assign a function to the right
programmable key.
9 Select the desired function using [.
10 Confirm with OK.
Automatic Picking up and
Hanging up the Phone
Automatic Picking up and Hanging up the Phone
These functions enable you to accept or end call by picking
up the cordless telephone from the charging station or
placing it back into the charging station respectively.
Philips · PPF 650
Switching Automatic Picking Up
On/Off
1
2
3
4
5
6
Press [, and using [ to select SETTINGS.
Confirm with OK.
Using [ select AUTO PICKUP.
Confirm with OK.
Switch the function on/off using õ EDIT ENTRY.
Confirm with OK.
Switching Automatic Picking up
On/Off
1
2
3
4
5
6
Press [, and using [ to select SETTINGS.
Confirm with OK.
Using [ select AUTO HANG UP.
Confirm with OK.
Switch the function on/off using õ EDIT ENTRY.
Confirm with OK.
Resetting the Cordless Telephone
Resetting the Cordless Telephone
With this function you can delete all personal settings such
as ring tones or programmable keys and the cordless telephone is reset to factory settings. Saved data remains
intact.
1 On the cordless telephone, press [, and using [
select SETTINGS.
2 Confirm with OK.
3 Using [ select ADVANCED SET..
4 Confirm with OK.
5 Use [ to select SET HANDSET.
6 Confirm with OK.
7 Use [ to select RESET HANDSET.
8 Confirm with OK.
9 Confirm the deletion with ô Yes.
Calling Call Logs
1 Press [, and using [ to select CALLS.
2 Confirm with OK.
3 Using [, select from which list you would like to dial
a number.
4 Confirm with OK.
5 Select the desired number using [.
6 Press ô Option.
7 Use [ to select an option: You can have the call details
displayed, call the number, save it to the telephone
book or delete it from the log, send an SMS to the
number or delete all numbers from the list.
8 Confirm with OK.
Calling Events
1
2
3
4
5
6
7
8
Press [, and using [ to select CALLS.
Confirm with OK.
Using [ select EVENTS.
Confirm with OK.
Using [ select VIEW.
Confirm with OK.
Select the desired number or message using [.
Confirm with OK.
Setting up the Display
You can set, whether you would like to be informed about
new events (SMSs, missed calls) with a message on the display.
1 Press [, and using [ to select CALLS.
2 Confirm with OK.
3 Using [ select EVENTS.
4 Confirm with OK.
5 Use [ to select whether you would like to turn the
function on or off.
6 Confirm with OK.
Displaying Call Logs and
Events
Call Logs
The call logs contain the last dialled numbers, incoming
calls and other events (messages, missed calls).
Settings on the Cordless Telephone · Resetting the Cordless Telephone
39
EN
14 Telephone Lines and Additional Devices
EN
Configuring Telephone Lines
and Services
PABX Systems
PABX Systems
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an outside line
access code in order to get a connection to the public telephone network (PSTN) from a PABX.
Additional Telephone No Extension
Notice
Additional Telephone No Extension
An additional telephone connected to the device
on a telephone socket is not considered an extension.
1 Press OK, 96 and OK.
2 In some countries you can set the dialling process to
pulse dialling or tone dialling (DTMF tones). Use [
to select the desired dialling process.
Notice
Selecting the Dialling Process
Only use pulse dialling if tone dialling is not
yet activated for your telephone line.
3 Confirm with OK.
4 Use [ to set whether you operate your device on an
extension.
5 Confirm with OK.
6 Configuring an extension: Enter the outside line
access code with which you reach the public telephone
network. This is usually 0.
Notice
Incorrect Outside Line Access Code
In rare cases, the outside line access code may
be a different number or a two-digit number.
For older telephone systems, the outside line
access code can be R (= Flash). Press R to
enter this outside line access code. If the connection to the public telephone network is
not possible, contact your telephone system
supplier.
7 Confirm with OK.
8 When finished, the device tests the telephone line.
Confirm with OK.
9 Your device checks whether it can establish a connection with the public telephone network. If it cannot
establish the connection, you are once again asked for
input.
40
DSL Connection
DSL Connection
In the event that you use a DSL modem: Connect the
device to the slot intended for analogue telephones/fax
machines! For additional information, please consult the
operating manual of your DSL system. Ask your telephone
or internet service provider if necessary.
ISDN Connection
ISDN Connection
Your device is an analogue fax device (Group 3). It is not
an ISDN device (Group 4), and therefore it cannot be
operated directly on an ISDN connection. In order to do
this, you need either an analogue adapter or a connection
for analogue terminals. Details for ISDN connections can
be found in the instructions provided with the terminal
adapter or the dial-up router.
Voice Mailbox
You cannot simultaneously use the answering machine
facility of your telephone service provider (= voice-mail
box) and receive faxes on your devices. Get the mail-box
function for your telephone connection deactivated or set
the number of rings for the fax switch to lower than 5 on
your device (also see Chapter Setting the Fax Switch, page
36). When the fax switch accepts the call, the mail-box of
the service provider does not step in. Enquire with your
telephone company.
Registering and De-Registering Additional Cordless Telephones
Configuring the Cordless Telephone
Normally your cordless telephone is registered with your
device in the factory. In the starting mode, press OK. The
display shows on which base unit and with which number
the cordless telephone is registered.
Unregistered Cordless Telephones
Notice
Unregistered Cordless Telephones
If you acquired a model with several cordless telephones, only one cordless telephone is registered with your device in the factory. Insert the
batteries as described above and register the
cordless telephones with your device (also see
Chapter "Telephone Connections and Additional Devices", page 40).
Additional Cordless Telephones
You can register in all up to five cordless telephones with
your device. Using only original cordless phones as additional cordless phones ensures optimum use of all functions. You can get original cordless telephones through our
order service or at specialist shops.
Philips · PPF 650
On the Cordless Telephone
GAP Compatible
Notice
GAP Compatible
Additional cordless telephone must be GAPcompatible.
Registering Cordless Telephone
Registering Cordless Telephone
You must first bring the cordless telephone and then your
device (= base station) in the registration mode to register
a cordless telephone.
1 On the cordless telephone, press [, and using [
select SETTINGS.
2 Confirm with OK.
3 Using [ select ADVANCED SET..
4 Confirm with OK.
5 Using [ select SET HANDSET.
6 Confirm with OK.
7 Using [ select REGISTRATION.
8 Confirm with OK.
9 Confirm with ô Yes. The cordless telephone goes
into registration mode.
10 Press OK, 82 and OK on the device.
11 Confirm the preset PIN code (0000) using OK.
The cordless telephone is automatically registered. This
process can take a few minutes. Then the number with
which it is registered with the device appears on the display
of the cordless telephone.
1 On the cordless telephone, press [, and using [
select SETTINGS.
2 Confirm with OK.
3 Using [ select ADVANCED SET..
4 Confirm with OK.
5 Using [ select SET BASE.
6 Confirm with OK.
7 Using [ select DELETE HANDSET.
8 Confirm with OK.
9 Using [ to select which cordless telephone you are
would like to de-register.
10 Confirm with OK.
11 Confirm the de-registration with ô Yes. The connection with the device is disconnected.
Registering the Cordless Telephone with other Devices
You can register a cordless telephone on four different
devices (= base units).
On the Device
1 Register the cordless telephone with the first device as
described above.
2 Press OK, 82 and OK on the next device.
3 Confirm the preset PIN code (0000) or enter a new PIN code.
Notice
Registering other Cordless Telephones
Notice
Registering other Cordless Telephones
You can register other cordless telephones with
your device in the same manner. If you face any
difficulties in registering, de-register all cordless
telephones, and re-register them individually.
Deregistering Cordless Telephone
You may log off a cordless telephone either using the
device or using the cordless telephone.
On the Device
1 Press OK, 83 and OK.
2 Using [ to select which cordless telephone you are
would like to de-register.
3 Confirm with OK. The device disconnects from the
cordless telephone.
Identically PIN Codes
The pin code can be identical with the pin
code on the first device.
4 Confirm with OK.
On the Cordless Telephone
5 On the cordless telephone, press [, and using [
select SETTINGS.
6 Confirm with OK.
7 Using [ select ADVANCED SET..
8 Confirm with OK.
9 Using [ select SET HANDSET.
10 Confirm with OK.
11 Using [ select PERSON.REGISTR.
12 Confirm with OK.
13 Select the next device (= base station) using [.
14 Confirm with OK.
15 Confirm the name of the base unit, or enter a new name.
16 Confirm with OK.
17 Enter the same pin code which you entered on the
other device.
18 Confirm with OK.
19 Using [ select the number with which you would like
to register the cordless telephone on the device.
20 Confirm with OK.
Telephone Lines and Additional Devices · Registering and De-Registering Additional Cordless Tele-
EN
Setting the Preferred Base Unit
Starting Fax Reception
Preferred Base Unit
EN
With this function you can specify which device (= base
station) should be used for placing telephone calls if you
have registered your cordless telephone with multiple
devices. When you select AUTO, the cordless telephone
automatically connects to the device that is within the
range.
1 On the cordless telephone, press [, and using [
select SETTINGS.
2 Confirm with OK.
3 Using [ select ADVANCED SET..
4 Confirm with OK.
5 Using [ select SET HANDSET.
6 Confirm with OK.
7 Using [ select BASE PRIORITY.
8 Confirm with OK.
9 Press õ EDIT ENTRY.
10 Using [ select the device to which you would like to
assign the priority, or select auto setting.
11 Confirm with OK.
Connecting Additional
Devices
If you pick up at an additional device and hear that you are
receiving a fax (whistling tone or silence), you can start the
fax reception by pressing *5 on the additional telephone or pressing START on the device.
Taking Over the Line
If you pick up on an additional telephone and the device
continues to ring or attempts to receive a fax, you can disconnect the device from the line. Press ** on the
additional telephone.
Changing Code
Changing Easylink Codes!
CAUTION!
Changing Easylink Codes!
Only change the codes if it is absolutely necessary. The codes must begin with * or # and
must be different.
Press OK, 54 and OK.
Enter the new code for starting fax reception.
Confirm with OK.
Enter the new code for taking over the line on an additional device.
5 Confirm with OK.
1
2
3
4
Additional Devices
You can operate other devices on a telephone line, for
instance answering machines, modems or charge counters
Connection to the Device
Connection to the Device
You can connect additional devices directly to your device.
Insert the telephone cable of the additional device into the
EXT socket (RJ-11-connection) on the device.
Direct Connection Recommended
Notice
Direct Connection Recommended
We recommend direct connection to the device
because this allows the fax switch to function
optimally and to control the additional devices.
Using an External Answering
Machine
For the best operation, the answering machine must be
connected to the EXT socket of the device. The numbers
of rings set for the external answering machine should be
less than the one set under FAX RINGS by at least two.
Example of the setting:
Number of Rings of the External Answering Machine .. 1
FAX RINGS .............................................................. 3
(also see Chapter Setting the Fax Switch, page 36)
External Answering Machine
Notice
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must be
first in the series if multiple devices are connected to the
same telephone socket. Follow the correct order.
Using Additional Telephones
(Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, additional telephones must be set to the tone dialling mode
(DTMF/MFV tones) (for this purpose see the operating
manual of your additional telephone).
42
External Answering Machine
The outgoing message must be shorter than ten
seconds. Avoid music in your announcement.
If the external answering machine has a “conserving function” (i.e. a function that changes the number of rings as
soon as new messages have been recorded), deactivate this
function.
If the external answering machine records fax signals, but
your device cannot receive faxes, inspect the connection of
the external answering machine
Philips · PPF 650
15 Service
Disruptions
DANGER!
Notice
Troubleshooting
Should disruptions occur, follow the instructions on the display and on the error report.
Checking the Ink Film
Reserve
Device can Close with a Snap!
Lock the cover of the device completely into
place when opening the device. You could be
injured if the cover falls while you are working on the device.
3 Grip the rear ink film roll at both the sides and place it
next to the front ink film roll.
1 Press OK, 46 and OK.
2 The number of pages that can still be printed with the
ink film is shown on the display.
3 Press STOP to return to the starting mode.
If the ink film used up or if there is no ink film in the
device, a message appears on the display.
Changing the Ink Film
Use Original Consumable Materials!
CAUTION!
Use Original Consumable Materials!
Use only original consumable materials. These
are available from a specialised retailer or
through our order service (see back side of this
user manual). Other consumable materials can
cause damage to the device.
4 Remove both the rolls from the device. The used ink
film cannot be reused.
Observe Packaging Instructions
CAUTION!
Observe Packaging Instructions
Follow the instructions on the packaging of the
consumable materials.
Introduction to Plug’n’Print Card
For receiving or copying documents, an ink film must be
inserted in your device. Your device is delivered with an
already inserted free ink film for a few test pages. For this
film, you do not require any Plug’n’Print card (= chip card
with information regarding ink film capacity). For every
next ink film that you insert, you must load the capacity
memory with the included Plug’n’Print card.
1 Remove the paper from the paper feeder and take the
paper tray out of the device.
2 Open the device by lifting the panel using grip in the
centre and folding it up.
Service · Checking the Ink Film Reserve
CAUTION!
Data on Used Ink Films!
The messages and copies you have printed
out can be read from used ink films. Consider data protection issues when disposing
of used ink films.
5 Pull the used Plug’n’Print card out of the plug socket
on the left hand side next to the ink film tray. The
Plug’n’Print card cannot be reused.
43
EN
6 Carefully remove the rubber bands from the new ink
film. Make sure that the film is not damaged!
10 Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
EN
7 Place the larger roll with the ink film in the rear ink film
tray. The blue gear wheel must be on the right hand
side.
11 Close the device. Insert the paper tray in the opening
provided for it behind the paper feeder. Insert paper
again.
Fixing a Paper Jam
8 Place the smaller roll without ink film in the front tray.
The blue gear wheel must be on the right hand side and
the pin must be inserted in the depression on the left
hand side.
1 Remove the paper from the paper feeder and take the
paper tray out of the device.
2 Open the device by lifting the panel using grip in the
centre and folding it up.
DANGER!
9 Break the chip card from the Plug’n’Print card. Insert
the chip card in the plug socket on the left hand side
next to the ink film tray.
Device can Close with a Snap!
Lock the cover of the device completely into
place when opening the device. You could be
injured if the cover falls while you are working on the device.
3 Carefully pull out the paper.
44
Philips · PPF 650
4 Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
4 Carefully pull the document to the front or to the back
out of the device.
EN
5 Close the device. Insert the paper tray in the opening
provided for it behind the paper feeder. Insert paper
again.
Fixing a Document Jam
1 Remove the paper from the paper feeder and take the
paper tray out of the device.
2 Open the device by lifting the panel using grip in the
centre and folding it up.
DANGER!
Device can Close with a Snap!
Lock the cover of the device completely into
place when opening the device. You could be
injured if the cover falls while you are working on the device.
5 Close the scanner cover and the cover of the automatic
document feeder. Both the supports must securely snap
into place.
6 Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
7 Close the device. Insert the paper tray in the opening
provided for it behind the paper feeder. Insert paper
again.
3 Open the scanner cover and the cover of the automatic
document feeder by first pushing the support (A) and
then the support (B) inside. The cover (C) falls freely.
Service · Fixing a Document Jam
45
Cleaning
Instructions for Cleaning!
DANGER!
4 Lightly wipe the upper side of the scanner glass (A) and
the lower side of the document feeder/scanner film (=
white plastic plate) (B) with a cloth.
Instructions for Cleaning!
Unplug the device from the power socket before
cleaning it. Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers (sprays,
abrasives, polishes, alcohol, etc.). Do not allow
any moisture to reach the interior of the device.
EN
Fax Cleaning Sheets
Notice
Fax Cleaning Sheets
Special fax cleaning sheets are available as accessories from our call centre. Insert a sheet into the
document feeder. Press STOP; the page is
ejected. Repeat this process at a few times.
1 Remove the paper from the paper feeder and take the
paper tray out of the device.
2 Open the device by lifting the panel using grip in the
centre and folding it up.
DANGER!
Device can Close with a Snap!
Lock the cover of the device completely into
place when opening the device. You could be
injured if the cover falls while you are working on the device.
5 Clean the feed roller (A) and the underside of the support pad of the feeder roller (B) with a soft, lint-free
cloth moistened with cleaning alcohol (96 percent).
Rotate the feed roller; You must clean the entire roller.
6 Close the scanner cover and the cover of the automatic
document feeder. Both the supports must securely snap
into place.
7 Turn the blue gear wheel forward to tension the ink
film. The ink film must not have any creases.
3 Open the scanner cover and the cover of the automatic
document feeder by first pushing the support (A) and
then the support (B) inside. The cover (C) falls freely.
8 Close the device. Insert the paper tray in the opening
provided for it behind the paper feeder. Insert paper
again.
46
Philips · PPF 650
Displaying the Battery
Charge
6 Place the cordless telephone into the charging station.
DANGER!
Never Into the Charging Station
Without Batteries!
Never place the cordless telephone into the
charging station without batteries.
The charge indicator on the display shows the charge level
of the battery. If the charge is too low, the display illumination is switched off and the hands-free function is not
available. Place the cordless telephone into the charging
station.
Notice
Charging Batteries for 12 Hours
Leave the cordless telephone in the charging
station for at least twelve hours. The batteries
will heat up slightly during charging; this is
not dangerous.
Changing the Batteries in
the Cordless Telephone
1 Press and hold ’ (at least two seconds) for switching
off the cordless telephone.
2 Open the battery compartment on the backside of the
cordless telephone by pulling the cover down.
Checking the Firmware Version
1 Press OK, 47 and OK.
2 The model designation and the configured country
appear on the display.
3 Confirm with OK.
4 The information on the firmware version of the device
is displayed.
5 Confirm with OK.
Using Service Codes
3 Remove the old batteries.
Notice
Disposing of the Batteries
The batteries used should be disposed of
according to the recycling regulations of your
country.
4 Insert the new rechargeable batteries in the battery
compartment with the positive and negative poles as
shown in the picture in the battery compartment.
DANGER!
No Non-Rechargeable Batteries!
Never use non-rechargeable batteries in the
cordless telephone. Follow the specifications
in the technical data.
Introduction
The service codes delete all the changed settings and your
device is reset to factory settings. It may be possible that the
device with the changed settings reacts differently than
expected.
Using Service Codes
CAUTION!
Settings will be Deleted!
Only use the service codes if this is absolutely
necessary. Some service codes also delete saved
messages and telephone book entries.
1 Press OK, 45 and OK.
2 Enter a service code:
7117—Deletes all changed settings and
saved data. The device is reset to factory settings and
the initial installation process is started.
7140—Deletes all changed settings. Saved
data and telephone book entries remain intact.
7227—Deletes saved faxes, when there are
problems with printing.
3 Confirm with OK.
4 Using [ select SURE: YES.
5 Confirm with OK.
Notice
5 Place the cover on the battery compartment and slide it
upward until it snaps into place.
Service · Displaying the Battery Charge
Cancelling Entry
If you have entered the incorrect code, you
can cancel the entry with SURE: NO.
47
EN
Power Cycling
EN
If a problem occurs that cannot be corrected with the
instructions in this user manual (see also the help below),
follow the steps given here.
1 Pull out the power plug.
2 Wait at least ten seconds, then plug the power plug
back into the socket.
3 Follow the instructions on the display and in the error
report. If the problems repeats, please contact our technical customer service or your retailer.
General Information
The time and date flash on the display.
You must check the time and date after a short power failure. Confirm with OK.
Problems when Faxing or Printing
Faxes sent are of poor quality.
Change the resolution from RESOL.: STANDARD to
RESOL.: FINE or RESOL.: PHOTO.
Change the contrast.
Clean the scanner and the document feed slot.
Test the device by making a copy of the document. If the
device is in order, the device of the recipient might be defective.
The device produces black lines when sending or printing. Clean the scanner and the document feed slot.
Copy is blank.
Insert the documents face up into the document feeder.
Printing is interrupted.
Paper or document jam, no paper or ink film. Follow the
instructions on the display and in the error report.
There could be a small pause after printing several pages.
The device continues printing automatically.
No printing
Check if you have inserted clamped paper correctly. The lever on the right hand side next to the paper feeder must be
folded backwards.
Documents are not properly fed.
Clean the scanner and the document feed slot.
Problems with the Connection
The device rings once, remains silent for a short while and
starts ringing again.
This is absolutely normal. The fax switch checks the call after the first ring. If it is a voice call, the device continues to
ring.
No dial tone
Check the installation of the device. Connect the telephone
cable to the socket marked LINE. Insert the telephone plug
into your PTT line socket.
48
Philips · PPF 650
Problems with the Connection
Fax transmissions are constantly interrupted.
Try to send the fax manually: Press ß, and dial the number.
If the recipient is using an answering machine, wait until
you hear a whistling tone. Press START.
It is possible that the recipient's device is not ready to receive.
You hear a whistling tone or silence in the handset.
The call is a fax: Press START on the device. Press
*5 on the additional telephone. Hang up.
No fax reception or a short fax audio signal as message on
the answering machine
Using function 51, set the number of rings for the fax
switch to 4 and the total number or the number of rings for
the answering machine (model dependent) to 5 (see Page
36).
You cannot simultaneously use the answering machine facility of your telephone service provider (= voice-mail box)
and receive faxes on your devices(see page 40).
Problems with the Cordless Telephone
Cordless telephone does not function or does not function Check if the cordless telephone is functioning and is regisas expected.
tered with the device.
Display shows only the battery charge.
Switch the cordless telephone off. Open the battery compartment on the backside. Remove the batteries and insert
them again. Close the battery compartment and switch the
cordless telephone on again.
No dial tone
The cordless telephone is not registered with the device or
is out of range.
The cordless telephone cannot be switched on.
Place the cordless telephone into the charging station.
The cordless telephone cannot be switched on after 12
hours in the charging station.
Change the batteries in the cordless telephone (also see
Chapter Service, Page 47).
Service · Power Cycling
49
EN
16 Appendix
Technical Data
EN
Dimensions (L¦×¦H¦×¦W) ...................313¦×¦129¦×¦197¦mm
Weight ...................................................................1,9¦kg
Mains Connection.................. 220¦–¦240¦V¦~ / 50¦–¦60¦Hz
Power Consumption
Stand-by Mode...............................................<¦2,5¦W
Transmission ...................................................<¦20¦W
Recommended Ambient ..................................18¦–¦28¦ºC
Relative Humidity ............... 20¦–¦80¦% (non-condensing)
Connection Type...................................... PSTN · PABX
Dialling Mode Tone / pulse dialling (country dependent)
Guarantee
Dimensions
Weight
Mains Connection
Power Consumption
Stand-by Mode
Transmission
Recommended Ambient
Relative Humidity
Connection Type
Dialling Mode
Standards
Safety........................................................... EN¦60950-1
Emissions ........................................... EN¦55022 Class B
Immunity ........................................................EN¦55024
Safety EN 60950-1
Emissions EN 55022 Class B
Immunity to Electrical Noise EN 55024
Scanner
Scan Width ........................................................ 212¦mm
Horizontal Resolution ....................................8 dots/mm
Vertical Resolution ................... Standard: 3,85 lines/mm
..................................................... Fine: 7,7 lines/mm
Scan Width
Horizontal Resolution
Vertical Resolution Standard
Vertical Resolution Fine
Memory
Telephone Book ..................................... up to 50 entries
Fax Messages ............ up to 15 pages (standard test letter)
SMS Messages ............................ up to 30 SMS messages
Telephone Book
Fax Messages
SMS Messages
Cordless Telephone
Rechargeable Batteries ............................... AAA · NiMH
Talk Time ................................................up to 10 hours
Stand-by Period......................................up to 120 hours
Range .......................................up to 50¦m (in buildings)
........................................... up to 300¦m (in open-air)
Rechargeable Batteries
Talk Time
Stand-by Period
Range (in Buildings)
Range (in Open-Air)
Paper
Capacity ............................................................50 sheets
Size.................................................... A4 · 210¦×¦297¦mm
Thickness ................................................ 0,07¦–¦0,11¦mm
Weight .........................................................60¦–¦90¦g/m²
Capacity
Size
Thickness
Weight
Document Feed Slot
Capacity ............................................................10 sheets
Width........................................................ 148¦–¦212¦mm
Length .......................................................100¦–¦600¦mm
Thickness ................................................ 0,06¦–¦0,15¦mm
Capacity
Width
Length
Thickness
Fax
Type .................................................................. Group 3
Compatibility ...............................................ITU-T¦T.30
Data Compression...........................................MH · MR
Modulation ................................... V.21 · V.27ter · V.29
Transfer Speed.................................................. 9.600¦bps
Type Group 3
Compatibility
Data Compression
(Terms and Conditions for United Kingdom only)
In order to supply the guarantee, you should contact your
dealer or Sagem Communications Helpdesk. The proof of
purchase will be required.
Please make usage of your equipment for the purpose for
which it was designed and under normal usage conditions.
Sagem Communications do not accept any liability for any
usage made out of the frame of its original designed purpose and any consequence that may arise from this usage.
Should any malfunctioning arise, the dealer or Sagem
Communications Helpdesk will advise you what to do.
A) General Guarantee Conditions
Sagem Communications undertakes to remedy by repair
or exchange at its own convenience, free of charge for
labour and replacement parts, any defects in the equipment during the guarantee period of 12—twelve—months
(3—three—months for accessories), from the date of original invoice of the Equipment, where those defects are a
result of faulty workmanship.
Unless the customer has concluded with Sagem Communications a maintenance contract in respect of the equipment which specifically provides for repairs to be carried
out at the customer's premises, the repairs will not be carried out on the equipment at the customer premises. The
customer must however return the defective equipment at
his/her own expense, to the address given by the dealer or
Sagem Communications Helpdesk.
In case a product needs to be sent in for a repair, it always
has to be accompanied by a proof of purchase (which is not
altered, written on or in any way be made illegible) showing that the product is still under warrantee. In case no
proof of purchase is enclosed, the Sagem Communications
repair center will use the production date as a reference of
establishing the warrantee status of the product.
Apart from all legal obligatory rules, Sagem Communications, do not give any Guarantee, either implicit or explicit
which is not set force in the present section, and could not
be hold responsible for any direct or indirect, material or
immaterial damage, in or out of the frame of the present
guarantee.
If any provision of this guarantee shall be held to be in
whole or in part invalid or illegal due to an obligatory rule
applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect
the remaining provisions or parts of this guarantee.
This guarantee does not affect the Customer statutory rights.
Modulation
Transfer Speed
Subject to Change
Technical specifications subject to change without notice.
50
Philips · PPF 650
B) Exclusions From Guarantee
Sagem Communications shall have no liability under the
guarantee in respect of:
•) Damage, defects, breakdown or malfunction due to one
or more of the following:
– Failure to properly follow the installation process and
instructions for use
– An external cause to the equipment (including but not
limited to: lightening, fire, shock, vandalism, inappropriate conditions of electrical network or water damage of any
nature)
– Modifications made without the written approval of
Sagem Communications
– Unsuitable operating conditions, particularly of temperature and humidity
– Repair or maintenance of the equipment by persons not
authorized by Sagem Communications
•) Wear and tear from normal daily use of the equipment
and its accessories
•) Damage due to insufficient or bad packaging of equipment when returned to Sagem Communications
•) Usage of new versions of software without previous
approval of Sagem Communications
•) Work on any equipment or software modified or added
without the prior written consent of Sagem Communications
•) Malfunctions not resulting from the Equipment or from
software installed in user workstations for the purpose of
use of the equipment.
Communication problems related to an unsuitable environment including:
– Problems related to access and/or connection to the
Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent
– Transmission faults (for example poor geographical coverage
by radio transmitters, interference or poor line quality)
– The local network fault (wiring, servers, workstations) or
the failure of the transmission network (such as but not
limited to interferences, fault or poor quality of the network)
– Modification of the parameters of the cellular network
carried out after the sale of the Product
•) The normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to
servicing not being carried out. Servicing costs are in any
event always borne by the customer.
•) Malfunctions resulting from the usage of products, consumables or accessories not compatibles with the equipment.
The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United Kingdom.
Helpdesk: 08 45 - 090 03 15
EN
C) Out of Guarantee Repairs
In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the Authorized Sagem
Communications Repair Centre for a cost estimation.
The repair and delivery costs will be invoiced to the customer.
Appendix · Guarantee
51
EN
The CE symbol confirms conformity with the EU directives that apply to the device.
Declaration of Conformity
(DoC)
Hereby, Sagem Communications Austria GmbH
declares that this PPF¦650 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
You can find the complete Declaration of Conformity on
our website www.sagem-ca.at/doc
WWW
Energy Star 2007
Energy Star
As a participant in the ENERGY STAR programme,
Sagem Communications Austria GmbH has made sure
that this machine complies with the ENERGY STAR
requirements.
Recycling
Packaging: To facilitate packaging recycling, please conform to your local selective recycling rules.
Batteries: Old batteries have to be deposited in designated collection areas.
WEEE
Product: The crossed out dustbin logo on your product
signifies it is classified as Electrical and Electronic Equipment covered by special disposal regulations.
To enforce recycling, recovery of The Waste Electrical and
Electronic Equipment (WEEE) and to protect the environment and human health, European regulations requires
that you selectively collect waste equipment using one of
the following options:
• Your retailer will take your equipment back if you are
buying a replacement product.
• Waste equipment can also be deposited in designated collection areas.
The paper and cardboard packaging used can be disposed of as
recyclable paper. Have the plastic wrapping and Styrofoam
packaging recycled or dispose of it in the non-recyclable waste,
depending on the requirements in your country.
Trademarks: The references mentioned in this manual are
trademarks of the respective companies. The lack of the trade52
marks É and Ë does not justify the assumption that these
dedicated terminologies are free trademarks. Other product
names used herein are for identification purposes only and may
be trademarks of their respective owners. Sagem Communications disclaims any and all rights in those marks.
The reproduction of certain documents (e.g. by scanning,
printing, copying) is prohibited in many countries. The
list of such documents below is not intended to be complete, it only offers a general overview. In case of doubt,
consult your legal advisor.
· Passports (personal identification)
· Entrance and exit visa papers (immigration papers)
· Military service documents
· Bank notes, travel checks, payment orders
· Postage stamps, tax stamps (stamped or unstamped)
· Loan papers, certificates of deposit, bonds
· Documents protected by copyright
Follow the statutory regulations of your country with
regard to the legal validity of fax transmissions—particularly in connection with the validity of signatures, meeting
delivery deadlines or disadvantages resulting from the loss
of quality in the transmission, etc.
Take care to maintain the statutory regulations of your country
regarding telecommunications secrecy and data privacy.
This product is intended for use on an analogue public telecommunications network (PSTN) and in the country
specified on the packaging. Use in other countries can
result in faulty functioning.
For more information, please contact the technical service
centre for your country. Should problems arise during use
of your machine, please contact your retailer first.
Neither Sagem Communications nor its affiliates shall be
liable to the purchaser of this product or third parties for
damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or
abuse of this product or unauthorized modifications,
repairs, or alterations to this product, or failure to strictly
comply with Sagem Communications operating and
maintenance instructions.
Sagem Communications shall not be liable for any damages or problems arising from the use of any options or any
consumable materials other than those designated as original Sagem Communications products or Sagem Communications approved products.
Sagem Communications shall not be held liable for any
damage resulting from electromagnetic interference that
occurs from the use of any interface cables other than those
designated as Sagem Communications products.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or
by any means, electronic, mechanical, photocopying, recording,
or otherwise, without the prior written permission of Sagem
Communications. The information contained herein is designed
only for use with this product. Sagem Communications is not
responsible, if this information is applied to other devices.
This user manual is a document that does not represent a contract.
Errors, printing errors and changes are reserved.Copyright
È 2009 Sagem Communications Austria GmbH
Reproduction Not Permitted
Philips · PPF 650
EN
Appendix · Declaration of Conformity (DoC)
53
EN
54
Philips · PPF 650
EN
Appendix · Declaration of Conformity (DoC)
55
Customer Information
Introduction 1
Introduction 1
As part of our continuing quest for total customer satisfaction, all of our products are made with ease-of-use and reliability in mind.
In your user manual you will find all the information
required to use your machine. If, after consulting your user
manual, you still require assistance, you should contact our
Call Centre. Our personnel are highly trained specialists
who can ensure that you receive the maximum benefit
from your product.
We can assist your more quickly if you do not call us from
the machine, rather an external telephone. Keep a printout
of the settings as well as the serial number of the machine
handy. The serial number can be found on the type label.
You can order original accessories from our homepage
or—in some countries (see below)—per telephone on our
toll-free number.
Use only original consumable materials. The warrantee
does not cover damages to the device resulting from other
consumables.
Introduction 2
Introduction 3
Introduction 2
United Kingdom
Telephone: 0800 - 358 08 07
E-Mail
E-Mail: dti.faxinfoline@sagem.com
Internet: www.sagem-communications.com
Internet
United Kingdom
Telephone: 08 45 - 090 03 15
Fax: 08 70 - 124 02 02
We hope that you will have lots of joy using your new
product.
Spaltenumbruch
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V.
and are used by SAGEM COMMUNICATIONS under license from Koninklijke Philips Electronics N.V.
SAGEM COMMUNICATIONS
Printing Terminals
Headquarters : Le Ponant de Paris
27, rue Leblanc · 75015 Paris · FRANCE
Tél. : +33 1 58 11 77 00 · Fax : +33 1 58 11 77 77
www.sagem-communications.com
Limited company · Capital 167.038.185 Euros · 440 294 510 RCS PARIS
PPF 650
UK
253132343-B