SR8730
SR8750
SR8751
Vacuum Cleaning Robot
user manual
This manual is made with 100 % recycled paper.
✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
English
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
DJ68-00682F(0.0).indd 01
2012.9.7 9:17:8 AM
safety information
SAFETY INFORMATION
• Before operating the appliance, please read this manual thoroughly and retain it for your
reference.
• Because these following operating instructions cover various models, the characteristics of your
WARNING
vacuum cleaner may differ slightly from those described in this manual.
WARNING
CAUTION/WARNING SYMBOLS USED
WARNING
CAUTION
Indicates that a danger of death or serious injury exists.
Indicates that a risk of personal injury or material damage exists.
OTHER SYMBOLS USED
Indicates that a risk of personal injury or material damage exists.
NOTE
02_ safety information
DJ68-00682F(0.0).indd 02
2012.9.7 9:17:8 AM
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANING
ROBOT.
Unplug from outlet when not in use and before conducting maintenance.
WARNING: to reduce the risk of fire, electric shock, or injury:
GENERAL
• Use only as described in this manual.
• Do not operate the vacuum cleaning robot or charger if it has been damaged in any way.
• If the cleaner is not working as it should, has been dropped, damaged, left outdoors, or
dropped in water, return it to a customer care center.
• Do not handle the charger or vacuum cleaning robot with wet hands.
• Use only on dry, indoor surfaces.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that they do not play with the appliance.
BATTERY CHARGER
•
•
•
•
•
•
•
•
•
•
•
Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
Do not use outdoors or on wet surfaces.
Unplug the charger from the outlet when not in use and before servicing.
Use only the charger supplied by the manufacturer to recharge.
Do not use with a damaged cord or plug.
Do not pull or carry by the cord, use the cord as a handle, close the door on the cord, or pull
the cord around sharp edges or corners. Keep the cord away from heated surfaces.
Do not use extension cords or outlets with inadequate current carrying capacity.
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
Do not mutilate or incinerate batteries as they will explode at high temperatures.
Do not attempt to open the charger. Repairs should only be carried out by a qualified customer
care centre.
Do not expose the charger to high temperatures or allow moisture or humidity of any kind to
come into contact with the charger.
safety information _03
DJ68-00682F(0.0).indd 03
2012.9.7 9:17:8 AM
safety information
VACUUM CLEANING ROBOT
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc.
• Do not use without a filter in place. When servicing the unit, never put fingers or other objects
into the fan chamber in case the unit accidentally turns on.
• Do not put any objects into openings. Do not use with any openings blocked; keep openings
free of dust, lint, hair, and anything that may reduce air flow.
• Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).
• Do not pick up anything that is burning or smoke, such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids such as gasoline, nor use on areas
where they may be present.
• Do not use vacuum cleaning robot in an enclosed space filled with vapours given off by oil
based paint, paint thinner, moth proofing substances, flammable dust, or other explosive or
toxic vapours.
• Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid
gets on skin, wash quickly with water. If the liquid gets into the eyes, flush them immediately
with clean water for a minimum of 10 minutes. Seek medical attention.
04_ safety information
DJ68-00682F(0.0).indd 04
2012.9.7 9:17:8 AM
contents
SAFETY INFORMATION
02
06
07
10
11
Power Related
Before Use
In Use
Cleaning and Maintenance
PRODUCT FEATURES
13
ASSEMBLING THE CLEANER
15 Components
16 Name of each part
15
OPERATING THE CLEANER
20
MAINTAIN TOOLS AND FILTERS
30
TROUBLESHOOTING
20 Installing the vacuum cleaning robot
20 Installation order
20 Turning the Power Switch on or off
21 Installing the charger
22 Charging
23 About the Battery
24 Using the vacuum cleaning robot
24 Starting/Stopping Cleaning
25 Recharging
26 Auto Cleaning
27 Spot Cleaning
28 Max Cleaning
29 Manual Cleaning (Option)
30 Cleaning the vacuum cleaning robot
30 Please keep the cleaning and maintenance
methods in mind
30 Cleaning the Sensor Window and the Camera
31 Cleaning the Dust Bin and the Filters
32 Cleaning the vacuum cleaning robot
32 Cleaning the Power Brush
34 Cleaning the Edge-Cleaning Side rotating Brush
35 Cleaning the Driving Wheel
36 Checklist before SVC Calls
38 Troubleshooting for Error Codes
36
PRODUCT SPECIFICATION
39
contents _05
DJ68-00682F(0.0).indd 05
2012.9.7 9:17:8 AM
safety information
POWER RELATED
WARNING
WARNING
Do not bend the power cord forcefully or place a heavy object
on it that could break it.
- This may result in fire or electric shock.
Make sure to remove any dust or water from the power plug.
- Failing to do so may result in a malfunction or electric shock.
WARNING
Do not pull the power plug by the cord or touch the plug with
wet hands.
- This may result in fire or electric shock.
WARNING
Do not use multiple plugs in a single socket.
(Do not leave the cord lying exposed on the floor.)
- This may result in fire or electric shock.
WARNING
Do not use a damaged power cord, plug, or a loose power
outlet.
- This may result in fire or electric shock.
06_ safety information
DJ68-00682F(0.0).indd 06
2012.9.7 9:17:8 AM
BEFORE USE
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
01 SAFETY INFORMATION
CAUTION
Before activating the vacuum cleaning robot, make sure that
the dust bin is assembled.
- If the dust bin is not inserted, vacuum cleaning robot will not
operate.
Never use vacuum cleaning robot in locations with combustible
material such as.
- Locations with candles or desk lamps on the floor.
- Locations with unattended fires (fire or embers).
- Locations with gasoline, distilled alcohol, thinner, ashtrays with
burning cigarettes, etc.
Vacuum cleaning Robot is for domestic use only. Do not use it in the following
locations.
- Attics, basements, warehouses, industrial buildings, separate rooms distant from the
main building, locations exposed to wet or damp conditions such as bathrooms or wash
rooms, and narrow and highly situated locations such as tables or shelves. Critical damage
(abnormal operation and breakage) may occur when used in these locations.
Open all doors to clean all rooms.
- When a door is closed, the vacuum cleaning robot will not be able to enter that room.
- However, make sure to close the doors to the main entrance, the veranda and the
bathroom, and any other rooms where the vacuum cleaning robot may fall to a lower floor.
For carpets with long tassels, fold the tassels under the carpet.
- Unfolded tassels may result in critical damage to the carpet and
the machine itself, as they get caught in the driving wheel or the
power brush.
Do not use the cleaner on a black floor.
- The vacuum cleaning robot may not run normally in this case.
safety information _07
DJ68-00682F(0.0).indd 07
2012.9.7 9:17:8 AM
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
Remove small objects or brittle items from the area to be
cleaned in advance.
- Make sure to clear any objects before cleaning.
- Make sure to remove fragile items such as china, glass objects,
flowerpots, etc.
- Vacuum cleaning robot does not recognize coins, rings or other
valuable items such as jewelry.
Remove objects scattered on the floor before cleaning.
- Vacuum cleaning robot is designed to detect obstacles 5cm away
from it.
- Bath towels, pads in front of bathrooms and sinks, entrances,
utility rooms, power cords, table cloths or belts can become
entangled in the driving wheel or power brush. This can cause
objects to fall from the table.
Inform all family members (or relevant parties) to be cautious
before cleaning or when using the Scheduled Cleaning Mode.
- Vacuum cleaning robot may run into children, causing them to fall.
Ensure that children do not step or sit on the vacuum cleaning
robot.
- Children may fall and injure themselves or critical damage may
occur to the product.
When a child or pet is left alone, make sure to turn off the
Power Switch of the vacuum cleaning robot.
- Vacuum cleaning robot may attract their attention.
- When the rotating wheel or brush catches fingers, feet, clothing or
hair, this may result in injury.
- If a child or pet is in the way of the vacuum cleaning robot, it may
be identified as an obstacle and the area may not cleaned.
- When the Power Switch is turned off, it will cut off the power
supply and deactivate all functions.
When installing the charger station, do not leave the power
cord exposed on the floor.
- When the vacuum cleaning robot automatically recharges or
passes by the charger station, it may drag the power cord around
with it.
Always keep the power cord of the charger plugged into the
outlet.
- Although the vacuum cleaning robot has a self-charging function,
if the power cord of the charger station is unplugged, it cannot
charge its battery automatically.
08_ safety information
DJ68-00682F(0.0).indd 08
2012.9.7 9:17:9 AM
CAUTION
Objects in front of the charger will prevent the vacuum
cleaning robot from auto-charging itself.
- Clear the area.
m
0.5
ut
abo
m
0.5
ut
abo
ab
ou
t1
m
WARNING
There should be no obstacles and cliffs 0.5m to the left and
right and within 1m of the front.
.5m
ut 0
abo
u
m
t 0.5
abo
01 SAFETY INFORMATION
CAUTION
Install the charger in a location that can be easily accessed by
the vacuum cleaning robot.
- If the charger is installed in a corner, this may cause extra
movements and may disturb the automatic recharging process.
ab
ou
t1
m
WARNING
Do not short-circuit the charge pins with metal objects such
as chopsticks, screwdrivers, and etc.
- This will result in critical damage to the charger.
WARNING
Make sure that there is no trace of liquids on the charger
station.
- Failing to do so may result in fire or electric shock.
WARNING
WARNING
WARNING
Make sure the vacuum cleaning robot does not vacuum or
move over liquids such as water, oil or pet litter.
- This may result in critical damage to the product.
- Liquids may spread through the wheels resulting in contamination.
Do not use the charger for other purposes.
- This may result in critical damage to the charger or cause a fire.
Do not install the charger station on a dark floor.
- If the floor where the charger station is installed is dark, it is hard for the vacuum cleaning
robot to return to it.
safety information _09
DJ68-00682F(0.0).indd 09
2012.9.7 9:17:9 AM
IN USE
CAUTION
You cannot use the vacuum cleaning robot on thick carpets.
- This may result in problems with the vacuum cleaning robot.
- This may result in damage to carpets.
CAUTION
Do not use the vacuum cleaning robot on a table or other high
locations.
- This may result in damage when the unit accidentally drops.
CAUTION
CAUTION
CAUTION
WARNING
Vacuum cleaning robot may bump into furniture such as chair
legs, table legs, thin and long furniture, etc. while operating.
- For a quicker and cleaner performance, place the chairs on top of
the table.
Do not place any objects on top of the vacuum cleaning robot.
- This may result in malfunction.
Immediately remove any large pieces of paper or plastic bags
from the machine while cleaning.
- Using the machine for an extended period of time with its inlet port
obstructed may result in critical damage to the product.
If an unusual sound, smell or smoke is emitted from the
vacuum cleaning robot, immediately turn off the Power Switch
and call the customer care center.
10_ safety information
DJ68-00682F(0.0).indd 10
2012.9.7 9:17:9 AM
NOTE
NOTE
Vacuum cleaning Robot cannot completely clean locations
that it cannot reach, such as corners, and spaces between
sofas and walls.
- Please clean these locations occasionally.
Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to
pick up dust clusters that were formed while cleaning.
- In this case, sweep up the dust with another cleaning tool.
01 SAFETY INFORMATION
NOTE
Vacuum cleaning Robot may not be able to continue its
operation if it is stuck at the entrance or veranda doorsill.
- Vacuum cleaning Robot stops operating for safety reasons if it
cannot move for more than 5 minutes.
- To resume operating, turn the Power Switch off and then on again
after moving it to a location where it can continue cleaning.
CLEANING AND MAINTENANCE
CAUTION
CAUTION
CAUTION
WARNING
When cleaning the product, do not spray water directly onto
the exterior or wipe it with a volatile material such as benzene,
thinner or alcohol.
- This may result in critical damage to the product.
Do not forcefully press the bumper on the Vacuum cleaning
Robot.
- If the bumper sensor gets damaged, the Vacuum cleaning Robot
may bump into walls or furniture.
The unit must not be disassembled or reconstructed by anyone
other than a qualified service engineer.
- This may result in damage to the product.
Remove any foreign substances accumulated on the Obstacle
and Cliff sensors on a regular basis.
- Dirt accumulated on the sensors will result in inaccurate
functioning of the sensors.
Cliff sensor
Obstacle sensor
safety information _11
DJ68-00682F(0.0).indd 11
2012.9.7 9:17:10 AM
WARNING
When removing foreign substances, always use the cleaning
brush after turning the Power Switch off.
- Failing to do so may result in sudden operation of the unit and
cause an injury or critical damage to the product.
Edge-cleaning side
brush
Power brush
WARNING
WARNING
WARNING
If the power cord is damaged, have it replaced by a qualified
service engineer from the customer care center.
- Failing to do so may result in fire or electric shock.
Before cleaning the charger, make sure to disconnect the
power cord for safety.
Contact the Samsung Electronics customer care center to
replace the battery.
- Failing to use original batteries will result in product failure.
12_ safety information
DJ68-00682F(0.0).indd 12
2012.9.7 9:17:10 AM
product features
• What is ceiling shape recognition (Visionary
mapping plus™)?
This function recognizes the shape of the ceiling
using the camera on top to identify the area to be
cleaned and determines the best way to pass over
and clean every section of the floor.
DELICATE CLEANING OF EVERY CORNER
Since the vacuum cleaning robot cleans the floor in a sequential way ( ) along the map
determined by the ceiling shape recognition function, it cleans every corner of the floor.
VARIOUS CLEANING MODES
Various cleaning modes are provided to meet all your needs.
2
About 1.5m
3
4
About 1.5m
1
1. Auto Mode : Cleans all rooms automatically.
2. Spot Mode : Cleans a localized area intensely. It can be used to clean bread or cookie
crumbs.
3. Max Mode : Runs until the battery is nearly depleted.
4. Manual Mode (Option) : You can clean the floor manually by moving the cleaning robot.
product features _13
DJ68-00682F(0.0).indd 13
2012.9.7 9:17:10 AM
AUTO CHARGING
When the battery is low, the Vacuum cleaning Robot is
automatically guided to the charger to enable it to perform a
quick auto charge.
EDGE-CLEANING SIDE ROTATING BRUSH
The edge-cleaning side rotating brush cleans dust from the
edges.
DOORSILL CROSSING
About 1.5 cm
Stair type
Vertical type
The Vacuum cleaning Robot’s innovative driving system makes
it possible for it to cross over doorsills with a height of about 1.5
cm and clean all rooms. The Vacuum cleaning Robot may not
be able to pass a 1.5 cm doorsill depending on the shape of the
doorsill.
ANTI-CRASH
The Vacuum cleaning Robot detects and avoids obstacles in 2
stages. First, the 7 obstacle sensors detect obstacles in stage 1
and if the Vacuum cleaning Robot does crash into an obstacle,
the 2 bumper sensors absorb the impact.
SAFETY DEVICE
stop
When the Vacuum cleaning Robot is lifted up while cleaning, the
driving wheels, power brush, suction motor, and side rotating
brush are stopped autonati(all) by sensor.
14_ product features
DJ68-00682F(0.0).indd 14
2012.9.7 9:17:11 AM
assembling the cleaner
COMPONENTS
■ Main Body
02 ASSEMBLING THE CLEANER
■ Charger (Station)
■ Others Components
❈ Option
User Manual
Cleaning Brush
Remote Control / 2
Batteries
assembling the cleaner _15
DJ68-00682F(0.0).indd 15
2012.9.7 9:17:11 AM
NAME OF EACH PART
■ Main unit
Display panel
Operating Button
Remote Control Sensor
Obstacle Sensor
Obstacle Sensor
Bumper Sensor
Front
Dust Bin Eject Button
Dust Bin
Remote Control Sensor
Side
Cliff Sensor
Driving Wheel
Side Brush
Charge Pin
Power Brush
Roller
Power Brush Cover
Cliff Sensor
Battery Cover
Charge Pin
Power Switch
Cliff Sensor
Driving Wheel
Bottom
16_ assembling the cleaner
DJ68-00682F(0.0).indd 16
2012.9.7 9:17:11 AM
■ Charger (Station)
Power Lamp
Charge Lamp
02 ASSEMBLING THE CLEANER
Vents
Charge Pin
assembling the cleaner _17
DJ68-00682F(0.0).indd 17
2012.9.7 9:17:12 AM
■ Remote Control (Option)
Power
Recharging
Auto
Max
Spot
Directional
Buttons
Start/Stop
(moving backwards is
not supported.)
Manual
■ Installing the Remote Control Batterise
Batteries are not installed in the remote control when purchasing the product.
Install the batteries (type AAA) before use.
1
Lift the battery compartment
cover at the back of the
remote control, while
pressing the locking tab.
2
3
Install the batteries into the
remote control as shown
by the figure below. (If the
batteries are installed with
the wrong polarity, the
remote control will not work.)
After inserting the tip of the
cover into the slot, push the
other end to close it until it
clicks into place.
❈ Specification: AAA type batteries
18_ assembling the cleaner
DJ68-00682F(0.0).indd 18
2012.9.7 9:17:13 AM
■ Display panel
3
1
A
5
B
6
02 ASSEMBLING THE CLEANER
4
2
C
7
DISPLAY PART
1. Battery Level Indicator
- Charging: Shows the charging progress in 3 steps.
- In Use: Shows the battery charge level. The battery charge level is reduced by each level from
FULL while operating.
2. Recharging
- This icon turns on when the Vacuum cleaning Robot returns to the charger station to charge its
battery.
3. Cleaning Mode Display
- Each time the cleaning mode button is pressed, the corresponding cleaning mode is displayed.
(A) Auto Mode: This icon turns on when Auto cleaning mode is selected.
(B) Spot Mode: This icon turns on when Spot cleaning mode is selected.
(C) Max Mode: This icon turns on when Max cleaning mode is selected.
4. Check Code
- The Check Code icon will turn on if an issue arises that needs your attention
BUTTON PART
5. Cleaning Mode
- Press to select a cleaning mode. After selecting a cleaning mode, press the (
) button to
start cleaning.
6. Start/Stop
- Press to start/stop cleaning.
7. Recharging
- When this button is pressed, The cleaning robot will return to the charger station to charge its
battery.
assembling the cleaner _19
DJ68-00682F(0.0).indd 19
2012.9.7 9:17:15 AM
operating the cleaner
INSTALLING THE VACUUM CLEANING ROBOT
Installation order
1. Turning the Power Switch on or off
To use the vacuum cleaning robot, you must turn on the Power Switch
at the bottom of the main unit.
2. Installing the Charger
To charge the vacuum cleaning robot, you must first install the charger.
Since the battery is discharged when the product is purchased, you
must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the vacuum
cleaning robot.
Turning the Power Switch on or off
To use the vacuum cleaning robot, you must turn the Power Switch
on.
If you turn the Power switch off, all settings will be reset.
1. Turn over the main unit and turn the Power Switch on.
- If the icons are not turned on, it indicates that the battery charge
is depleted. In this case, dock the Vacuum cleaning Robot to the
charger station after turning the Power Switch on.
- Note that turning the Power Switch off will reset all settings.
- When no key is pressed for approximately 10 minutes when the
power is on, the power is automatically turned off to save battery
power. In this case, to use this Vacuum cleaning Robot again,
please push the “Power” button or
button.
CAUTION
If the Power Switch is turned off, the Vacuum cleaning Robot will not be charged even if it is
docked with the charger station.
20_ operating the cleaner
DJ68-00682F(0.0).indd 20
2012.9.7 9:17:17 AM
Installing the charger
Power Lamp
Charging Lamp
2. There should be no obstacles and cliffs 0.5m to the left and
right and within 1 m of the front.
.5m
ut 0
abo
.5m
ut 0
abo
03 OPERATING THE CLEANER
1. Install the charger on a flat surface.
ab
ou
t1
m
3. Install the charger in a location where it can be easily accessed by
the vacuum cleaning robot.
4. Arrange the power cord along the wall.
5. When the floor is made of wood, install the charger in the same
direction as the grain of the wood.
NOTE
Always keep the power cord of the charger plugged
into the power outlet.
- If no power is supplied to the charger, the vacuum
cleaning robot will not be able to find the charger and will
not be able to charge automatically.
- If the vacuum cleaning robot is separated from the
charger, the battery is automatically discharged.
operating the cleaner _21
DJ68-00682F(0.0).indd 21
2012.9.7 9:17:17 AM
operating the cleaner
Charging
When the product is initially purchased, the battery is fully
discharged, and you must charge the vacuum cleaning
robot manually.
Power lamp
Charging lamp
Turn on the Power Switch at the bottom of the product.
1. After aligning the charge pins of the main unit with the
charge pin of the charger station, press the main unit
until you hear a Recharging power sound from the
charger.
- The Charging Lamp turns green.
Power lamp
Charging lamp
2. Check the charge status of the vacuum cleaning
robot.
- When it is fully charged, all three bars of the battery level icon will Flash simultaneously.
■ If the following appears in the display (as seen in the figure below) 10 seconds after connecting
the robot cleaner to the charging station, it indicates that the power switch is turned off. In this
case, please turn on the power switch at the bottom of the cleaner.
Flash
Flash
Flash
■ When the battery level display flashes while
cleaning, the Vacuum cleaning Robot stops
vacuuming and automatically charges itself at the
charger.
■ If the battery level icon on the display moves to
the right as shown while the cleaner is operating,
the cleaner can no longer be operated by either
the remote control or the buttons on the main unit.
In this case, use the charger station to recharge
the battery. (This is when the battery is completely
discharged.)
<Charge display>
Charge
Charging Required
complete
charging
22_ operating the cleaner
DJ68-00682F(0.0).indd 22
2012.9.7 9:17:17 AM
NOTE
03 OPERATING THE CLEANER
• When the product is initially purchased, it will take about 120 minutes to fully charge the
battery and will run for about 90 minutes.
• When charging the battery while the battery is over-heated, the charging time can increase.
• Measures to take when charging is not smooth. When the Vacuum cleaning Robot cannot
be automatically charged, check the following:
- Turn the Power Switch at the bottom of the Vacuum cleaning Robot off and on (Reset).
- Re-plug the power of the charger (Reset).
- Check whether there are any foreign substances on the charge connector and wipe the
charge connector on the main unit and the charger with a dry cloth.
- Check whether there are objects near the charger that are strong reflectors.
• When separating the Vacuum cleaning Robot from the charger, it will discharge naturally.
- Charge the Vacuum cleaning Robot through the charger, if possible. (When leaving your
home unattended for a long period of time due to a business trip, travelling etc., turn off the
Power Switch of the Vacuum cleaning Robot and unplug the power of the charger to store
them.)
About the Battery
■ The robotic vacuum cleaner is powered by an environment-friendly Nickel Metal Hydride (NiMH)
rechargeable battery, and an over-charge prevention function guarantees an extended life time.
■ The battery warranty period is 6 months from the date
of purchase.
■ When purchasing a battery, ask the customer care center
) and model number
for the genuine part symbol (
before purchasing it.
-
This battery is only for Samsung vacuum cleaning robot. It is strictly prohibited to use it for other
appliances or for other purposes.
Do not disassemble or modify the battery.
Charge it in a location with good ventilation.
Do not expose the battery to fire and do not heat it.
Do not connect any metallic objects to the (+) or (-) terminals of the battery.
Keep it indoors (0 °C~40 °C).
Before you discard product, dispose of batteries in an environmentally safe manner.
Do not discard this batteries with your regular household trash.
Follow all local regulations when disposing of old batteries.
❈ If the battery is out of order, do not disassemble it. Contact your nearest customer care center.
❈ An increased charging time and a shorter battery life indicates the near end of the battery life.
Please contact an authorized customer care center to replace your battery.
The rechargeable battery incorporated in this product is not user replaceable.
For information on its replacement, please contact your service provider.
operating the cleaner _23
DJ68-00682F(0.0).indd 23
2012.9.7 9:17:18 AM
USING THE VACUUM CLEANING ROBOT
Starting/Stopping Cleaning
You can run or stop all vacuum cleaning robot functions.
■ Each vacuum cleaning robot function only runs when the
Power Switch is turned on.
■ When the robotic vacuum is operating, press the ( ) button
to cancel the operation and select a function.
Turning the power on or off
❈ Option
Turning the power on
- Remote control: Press the [Power] button. (Option)
- Main unit: Press the ( ) button.
- Cleaning mode icons are turned on.
Turning the power off
- Remote control: Press the [Power] button. (Option)
- Main unit: Press and hold the ( ) button down for 3 seconds.
- All icons except for the battery level indicator are turned off.
Using the remote
control
Starting or stopping cleaning
Starting
- Remote control: Press the Auto, Spot, Max, Manual button.
(Option)
- Main unit: Select Auto / Spot / Max mode by using the ( )
button and then pressing the ( ) button.
- When cleaning begins, the Vacuum cleaning Robot starts to
move.
❈ Pressing the ( ) button without selecting cleaning mode starts
to perform the Auto mode cleaning.
Stopping
- To stop, press the ( ) remote control or main unit button.
- When cleaning is stopped, the Vacuum cleaning Robot stops.
Using the main unit
buttons
24_ operating the cleaner
DJ68-00682F(0.0).indd 24
2012.9.7 9:17:18 AM
Recharging
03 OPERATING THE CLEANER
You can have the Vacuum cleaning Robot return to the charger
to charge the battery by using the Recharging button.
■ When the Vacuum cleaning Robot is operating, press the ( )
button to cancel the operation and press the Recharging button.
❈ Option
1. Press the Recharging button.
- The main unit icon ( ) is turned on and the Vacuum cleaning Robot
will return to the charger.
2. To stop the Vacuum cleaning Robot while it is returning to the
charger, press the ( ) button.
3. To test the auto charge function, press the Recharging button when
the Vacuum cleaning Robot is less than 1.5 m from the charger.
Using the remote
control
Flash
Using the main unit
buttons
m
5
1.
d
ea
ah
Troubleshooting when the Vacuum cleaning Robot does not
return to the charger
■ Check the installation of the charger
- When the charger is in a location where the charger cannot guide
the Vacuum cleaning Robot to the charger.
- When the charger is more than 5m away from Vacuum cleaning
Robot.
: It may require a longer time for the Vacuum cleaning Robot to
return to the charger.
■ Manually charge the Vacuum cleaning Robot in the following
cases.
- When the charger is installed in a corner.
- When the battery is fully discharged.
- When the Vacuum cleaning Robot is trapped by an obstacle
(furniture etc.)
- When the Vacuum cleaning Robot cannot pass over the doorsill
to the location where the charger is installed.
operating the cleaner _25
DJ68-00682F(0.0).indd 25
2012.9.7 9:17:18 AM
Auto Cleaning
The Vacuum cleaning Robot will move by itself and automatically
clean the house until cleaning is completed once.
■ If cleaning begins when the Vacuum cleaning Robot is docked with the
charger station, the time to return to the charger is decreased since the
Vacuum cleaning Robot remembers its original position while moving.
■ If the battery level becomes too low while cleaning, the Vacuum cleaning
Robot will automatically return to the charger station and resume
cleaning after charging its battery. (Number of cleaning operations
resumed: Once)
Main unit button
Remote control
button (Option)
Configuration
Sequence
Flash
1. Set the mode.
➧
1time
2. Cancel the mode.
NOTE
CAUTION
While cleaning
About the Resume Cleaning function
• If the Vacuum cleaning Robot has evaluated that cleaning
is complete, the resume cleaning function is not performed.
• If you move the Vacuum cleaning Robot when it is being
charged or press a button, the Vacuum cleaning Robot
judges cleaning to be complete and does not resume
cleaning.
Do not move the Vacuum cleaning Robot when it is cleaning
or press a button while it is cleaning. Otherwise, the Vacuum
cleaning Robot judges cleaning to be complete and starts
cleaning again from the beginning.
26_ operating the cleaner
DJ68-00682F(0.0).indd 26
2012.9.7 9:17:19 AM
Spot Cleaning
Main unit button
Remote control
button (Option)
Configuration
Sequence
About 1.5m
About 1.5m
03 OPERATING THE CLEANER
You can conveniently clean a specific area that has a a lot of
cookie crumbs, dust, and etc.
■ Move the Vacuum cleaning Robot to the location where you want to
perform a spot clean.
Flash
1. Set the mode.
➧
2time
2. Cancel the mode.
-
While cleaning
In Spot cleaning mode, the Vacuum cleaning Robot cleans an
area with a length of 1.5m and a width of 1.5m.
When the robot cleaner finishes cleaning, it will stop and enter
Standby mode.
NOTE
When the Vacuum cleaning Robot is docked with the charger
station, spot cleaning is not supported.
operating the cleaner _27
DJ68-00682F(0.0).indd 27
2012.9.7 9:17:19 AM
Max Cleaning
The Vacuum cleaning Robot automatically moves and cleans until
the battery runs out and the battery level flashes only one level.
■ If cleaning begins when the Vacuum cleaning Robot is docked with
the charger station, the time to return to the charger is decreased
since the Vacuum cleaning Robot remembers its original position
while moving.
■ If the battery level becomes low while cleaning, the Vacuum cleaning
Robot automatically returns to the charger station and resumes
cleaning after charging the battery. (Number of resumed cleaning
operations: Once)
Main unit button
Remote control
button (Option)
Configuration
Sequence
Flash
1. Set the mode.
➧
3 times
(when the product is not in the
process of charging.)
2 times
(when the product is charging.)
While cleaning
2. Cancel the mode.
NOTE
CAUTION
About the Resume Cleaning function
• If the Vacuum cleaning Robot judges cleaning to be
complete, resume cleaning is not performed.
• If you move the Vacuum cleaning Robot while it is being
charged or press a button, Vacuum cleaning Robot judges
cleaning to be complete (cleaning is not resumed).
Do not move the Vacuum cleaning Robot while it is cleaning or
press a button while cleaning. Otherwise, the Vacuum cleaning
Robot judges cleaning to be complete and starts cleaning
again from the beginning.
28_ operating the cleaner
DJ68-00682F(0.0).indd 28
2012.9.7 9:17:19 AM
Manual Cleaning (Option)
Remote control button
(Option)
Configuration Sequence
Flash
1. Set the mode.
2. Cancel the mode.
NOTE
03 OPERATING THE CLEANER
You can move the Vacuum cleaning Robot to clean a particular
location directly by using the remote control.
■ Move the Vacuum cleaning Robot to the location where you want to
perform manual cleaning.
■ You can manually clean using the remote control only.
While cleaning
• When the Vacuum cleaning Robot is docked with the
charger station, manual cleaning is not supported.
Directional Buttons
(Forwards, Left, Right)
A backwards function is not
supported.
operating the cleaner _29
DJ68-00682F(0.0).indd 29
2012.9.7 9:17:20 AM
maintain tools and filters
CLEANING THE VACUUM CLEANING ROBOT
Please keep the cleaning and maintenance methods in mind
■ When the Power Switch is damaged, please contact the service
agent so that it does not cause any accidents.
■ Do not use any means or mechanical devices not installed by the
manufacturer that could accelerate the deformation of the Vacuum
cleaning Robot.
■ Always turn off the power switch at the
bottom of the main unit before cleaning
the robotic vacuum. The Vacuum cleaning
Robot could operate suddenly and cause
an injury.
Cleaning the Sensor Window and the Camera
You must turn off the Power Switch at the bottom of the main
unit before cleaning the robotic vacuum.
■ Never spray water, thinner, benzene etc. directly onto the main unit
of Vacuum cleaning Robot.
■ Lightly wipe the sensor window or camera
using a soft cloth.
Camera
Front Sensor window
Front Sensor Window and
Camera
Cliff Sensor Window
Rear Sensor Window
30_ maintain tools and filters
DJ68-00682F(0.0).indd 30
2012.9.7 9:17:20 AM
Cleaning the Dust Bin and the Filters
Filter
04 MAINTAIN TOOLS AND FILTERS
First, empty the dust bin before cleaning it.
■ When separating the dust bin, take care not to spill the dust
out of the dust bin.
■ Empty the dust bin in the following cases.
1. When dust has accumulated inside the dust bin.
2. When the suction power suddenly becomes weak.
3. When the noise suddenly increases.
Dust Bin Cover
1. Press the Dust Bin Eject (PUSH) button and pull the dust bin to
separate the dust bin.
2. Separate the dust bin cover by pulling it in the direction of the arrow
in the figure.
3. Separate the Filter from the dust bin by pulling it in the direction of
the arrow in the figure.
4. Wipe the dust from the Filter and the dust bin.
❈ You can clean it with water.
5. Install the Filter into the dust bin.
- Make sure that the grid pattern of the Filter is facing downwards. It
cannot be installed in the wrong direction.
6. Close the dust bin cover and install it into the main unit.
maintain tools and filters _31
DJ68-00682F(0.0).indd 31
2012.9.7 9:17:20 AM
CLEANING THE VACUUM CLEANING ROBOT
Cleaning the Power Brush
You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic vacuum.
• Because the dust in the dust bin may come out, separate the
CAUTION
dust bin first before cleaning the power brush.
1. Separate the dust bin by pressing the Dust Bin Eject (PUSH)
button.
2. After checking whether there are any foreign substances,
press the hook that is fixing the brush cover to separate it.
3. Lift the power brush up from the main unit.
4. Remove any foreign substances such as long hairs or strings
wrapped around the power brush using a cleaning brush or a
vacuum cleaner.
5. When cleaning is complete, fix the Power Switch side of the
power brush first and then fix the other side of the brush in the
same way.
32_ maintain tools and filters
DJ68-00682F(0.0).indd 32
2012.9.7 9:17:21 AM
6. After inserting the 3 tips at the top of the cover, push the other
end in until it “clicks” into place.
• To prevent the Vacuum cleaning Robot from becoming clogged, be careful not to vacuum tooth
picks or cotton swabs.
• When removing foreign substances becomes difficult, contact a customer care center.
• Because the power brush vacuums the dust on the floor, long strings or hair can become
wrapped around the brush. Check and clean the power brush regularly.
04 MAINTAIN TOOLS AND FILTERS
CAUTION
maintain tools and filters _33
DJ68-00682F(0.0).indd 33
2012.9.7 9:17:21 AM
Cleaning the Edge-Cleaning Side rotating Brush
You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic vacuum.
1. Check whether the side rotating brush is bent or whether there
are any foreign substances stuck on the brush.
2. Wearing rubber gloves, wrap the side rotating brush with a cloth
using hot water for about 10 seconds and wipe it on the cloth.
3. Turning the side rotating brush, repeat the procedures in Step 2.
4. If hair or string is wrapped between the main unit and the side
rotating brush, undo the screw of the side rotating brush using a (+)
driver to remove it.
When reassembling the brush, check the “L” mark on the edgecleaning side rotating brush and the “L” mark on the main unit
and then reassemble the side rotating brush.
(Letter “R” is carved at the right side rotating brush.)
NOTE
Because the side rotating brush easily attracts hair and other foreign substances, make sure to
clean it frequently.
Excessive foreign substances on the side rotating brush can damage the brush.
34_ maintain tools and filters
DJ68-00682F(0.0).indd 34
2012.9.7 9:17:21 AM
Cleaning the Driving Wheel
04 MAINTAIN TOOLS AND FILTERS
You must turn off the Power Switch at the bottom of the main
unit before cleaning the robotic.
■ If the vacuum cleaning robot suddenly starts to zigzag, there may
be foreign substances stuck on the driving wheel.
1. When cleaning the driving wheel, place a soft cloth on the floor
and flip the main unit, placing it down carefully.
2. Check for foreign substances and remove them using a stick or a
pair of blunt nippers if necessary.
maintain tools and filters _35
DJ68-00682F(0.0).indd 35
2012.9.7 9:17:22 AM
troubleshooting
CHECKLIST BEFORE SVC CALLS
Symptom
Vacuum cleaning
Robot does not
operate at all before
cleaning.
Checklist
Measure to Take
• Is the dust bin assembled?
• Install the dust bin.
• Is the Power Switch turned on?
• Turn on the Power Switch.
• Is cleaning mode (
display panel turned on?
) in the • Press the ( ) button. (To turn it
off, press and hold the ( ) button
down for 3 seconds or longer.)
• Does the battery level icon on
the display move to the right as
shown?
(
)
• Lift up the Vacuum cleaning
Robot, and manually dock the
robotic vacuum onto the charger
to charge it.
• Vacuum cleaning Robot will not
• Replace the batteries in the remote
operate when the battery in the
control. (AAA type)
remote control is depleted. (Option)
Vacuum cleaning
Robot stopped
operating while
cleaning.
• Does the battery level icon on
the display move to the right as
shown?
(
• Lift up the Vacuum cleaning Robot,
manually dock the robotic onto the
charger to charge it.
)
• Has the vacuum cleaning robot
become hooked on wires on the
floor?
• Turn off the Power Switch and
remove the wires.
• Is the Vacuum cleaning Robot
stuck to the floor where there is a
height difference?
- The driving wheel is lifted.
• Turn off the Power Switch and
move the cleaning robotic vacuum
to another place to clean.
• Is there a thin towel (cloth)
• Turn off the Power Switch and
wrapped around the driving wheel?
remove the thin towel.
The suction power is
weak while cleaning.
• Is the Vacuum cleaning Robot
stuck on the doorsill?
• Turn off the Power Switch and
move the Vacuum cleaning Robot
to another place to clean.
• Check whether the dust bin is full
of dust.
• Stop the Vacuum cleaning Robot
and empty the dust bin.
• Check whether the suction inlet is
clogged by foreign substances.
• Turn off the Power Switch and
remove the foreign substances on
the suction inlet.
• Check whether the Filter is
clogged.
• Clean the Filter well.
36_ troubleshooting
DJ68-00682F(0.0).indd 36
2012.9.7 9:17:22 AM
Symptom
Measure to Take
• Check whether the power plug of
the charger is plugged correctly
into the outlet.
05 TROUBLESHOOTING
Vacuum cleaning
Robot cannot find
the charger.
Checklist
• If there are any obstacles within a
range of about 1m in front of the
charger and about 0.5m range to
the left and right of the charger,
you should remove the obstacles.
• If there are any foreign substances
on the change pin, wipe them off
with a dry towel.
troubleshooting _37
DJ68-00682F(0.0).indd 37
2012.9.7 9:17:22 AM
TROUBLESHOOTING FOR ERROR CODES
ERROR CODE
Flash
Flash
Flash
Flash
Flash
CAUSE
SOLUTION
• Vacuum cleaning Robot is
caught, stuck or trapped while
navigating.
• Turn off the Power Switch at the bottom
and move the Vacuum cleaning Robot to a
different location.
• A foreign substance (string,
paper, toy etc.) is caught in the
power brush.
• Turn off the Power Switch at the bottom
and remove the foreign substance from the
power brush.
• A foreign substance (string,
paper, toy etc.) is caught in the
left driving wheel.
• Turn off the Power Switch at the bottom
and remove the foreign substance from the
left driving wheel.
• A foreign substance (string,
paper, toy etc.) is caught in the
right driving wheel.
• Turn off the Power Switch at the bottom
and remove the foreign substance from the
right driving wheel.
• Check bumper sensor.
• Slightly pull the stuck bumper outward.
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
Flash
• A foreign substance (dust, stain • Turn off the Power Switch at the bottom
etc.) is on the Obstacle sensor
and wipe the foreign substance from the
window.
front and rear sensor windows using a soft
cloth.
• A foreign substance (Dust,
stain etc.) is on the Cliff sensor
window.
• Turn off the Power Switch at the bottom
and wipe the foreign substance on the cilff
sensor window with a soft cloth.
• Dust bin not inserted.
• Insert the dust bin until you hear a “Click”
sound.
Flash
Flash
Flash
❈ If you press the (
• A foreign substance (String,
• Turn off the Power Switch at the bottom
cloth etc.) is caught on the edgeand wipe the foreign substance from the
cleaning side rotating brush.
edge-cleaning side rotating brush.
) button or turn off the Power Switch, the error code is cleared.
38_ troubleshooting
DJ68-00682F(0.0).indd 38
2012.9.7 9:17:22 AM
product specification
90 mm (Height)
355 mm (Length)
355 mm (Width)
275 mm (Width)
161 mm (Length)
Main Body
Classification
Mechanical
Specifications
Electrical
Specifications
Cleaning
Specifications
Charger (Station)
Item
Detail
Diameter
355mm
Height
90mm
Weight
3.5kg
Power voltage
AC 220-240V~, 50-60Hz
Charge power consumption
50 W
Main unit power consumption
40 W
Battery specifications
14.4V / 2,000 mA
Dust bin capacity
About 0.6 ℓ
Charging type
Auto Charging/Manual Charging
Cleaning mode
Auto, Spot, Max, Manual(Option)
Charging time
About 120 minutes
Cleaning time
(on the basis of hard floor)
About 90 minutes
Cleaning method
Ceiling shape recognition
Main unit button type
Button type
06 PRODUCT SPECIFICATION
122 mm (Height)
This Vacuum cleaner is approved the following. (Only available in E.U.)
Electromagnetic Compatibility Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
product specification _39
DJ68-00682F(0.0).indd 39
2012.9.7 9:17:22 AM
Open Source Announcement
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL.
You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this
product by sending email to: oss.request@samsung.com
If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically
performing source distribution may be charged.
This offer is valid to anyone in receipt of this information.
GPL Software :
Linux kernel, BusyBox, mtd-utils, lrzsz, wireless tools
LGPL Software :
uClibc
- GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all
its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure
that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source
code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you
can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they
know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this
free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is
not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear
that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work
based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the
Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is
included without limitation in the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act
of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based
on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of
this License along with the Program.
DJ68-00682F(0.0).indd 40
2012.9.7 9:17:23 AM
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange
for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program
or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for
such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright
notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute
the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work based on the Program is not required to
print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply
to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole
which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program)
on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative
is allowed only for noncommercial distribution and only if you received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts
used to control compilation and installation of the executable. However, as a special exception, the source code distributed need
not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and
so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from
the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any
further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by
third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program
at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply and the section as a whole is intended to apply in other circumstances.
DJ68-00682F(0.0).indd 41
2012.9.7 9:17:23 AM
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which
is implemented by public license practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or
she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to
it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE
TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM
TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to
make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is
found.
one line to give the program’s name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
DJ68-00682F(0.0).indd 42
2012.9.7 9:17:23 AM
type `show w’. This is free software, and you are welcome
to redistribute it under certain conditions; type `show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course,
the commands you use may be called something other than `show w’ and `show c’; they could even be mouse-clicks or menu
items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the
program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program `Gnomovision’
(which makes passes at compilers) written
by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine
library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use
the GNU Lesser General Public License instead of this License.
- GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2,
hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for
all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of
the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully
about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the
explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive
source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you
are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender
these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we
gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must
provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and
recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal
permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified
by someone else and passed on, the recipients should know that what they have is not the original version, so that the original
author’s reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company
cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist
that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU
Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public
License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking
DJ68-00682F(0.0).indd 43
2012.9.7 9:17:23 AM
a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code
with the library.
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary
General Public License. It also provides other free software developers Less of an advantage over competing non-free programs.
These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license
provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it
becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that
a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body
of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the
whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program
that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between
a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the
latter must be combined with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder
or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this
License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on
the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a
portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation
is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code
means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control
compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a
work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the
Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with
the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange
for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
•
a) The modified work must itself be a software library.
•
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any
change.
•
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
•
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and
performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent
of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this
function must be optional: if the application does not supply it, the square root function must still compute square
roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library,
and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply
to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole
DJ68-00682F(0.0).indd 44
2012.9.7 9:17:23 AM
which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a
volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the
Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public
License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has
appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy
the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled
or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because
it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may
be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can
be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline
functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6.
Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce
a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit
modification of the work for the customer’s own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are
covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must
include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also,
you must do one of these things:
•
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
•
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user’s computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long
as the modified version is interface-compatible with the version that the work was made with.
•
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
•
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
•
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for
reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that
is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
DJ68-00682F(0.0).indd 45
2012.9.7 9:17:23 AM
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work
based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
•
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
•
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License
to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from
the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by
third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all.
For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or
indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of
the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity
of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which
is implemented by public license practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or
she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to
it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version
ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with
these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the
free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE
TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
DJ68-00682F(0.0).indd 46
2012.9.7 9:17:23 AM
OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY
TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free
software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively,
under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full
notice is found.
one line to give the library’s name and an idea of what it does.
Copyright (C) year name of author
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as
published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the
library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random
Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
- JPEG
This software is based in part on the work of the Independent JPEG Group.
- OpenCV :
IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
By downloading, copying, installing or using the software you agree to this license.
If you do not agree to this license, do not download, install, copy or use the software.
License Agreement
For Open Source Computer Vision Library
Copyright (C) 2000-2008, Intel Corporation, all rights reserved.
Copyright (C) 2008-2010, Willow Garage Inc., all rights reserved.
Third party copyrights are property of their respective owners.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
Redistribution’s of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistribution’s in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
The name of the copyright holders may not be used to endorse or promote products derived from this software without specific
prior written permission.
This software is provided by the copyright holders and contributors “as is” and any express or implied warranties, including,
but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall
the Intel Corporation or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages
(including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption)
however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising
in any way out of the use of this software, even if advised of the possibility of such damage.
DJ68-00682F(0.0).indd 47
2012.9.7 9:17:23 AM
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Country
Customer Care Center
Web Site
U.K
0330 SAMSUNG (7267864)
www.samsung.com
SOUTH AFRICA
0860 7267864 (SAMSUNG)
www.samsung.com
AUSTRALIA
1300 362 603
www.samsung.com
HONG KONG
(852) 3698-4698
www.samsung.com/hk
www.samsung.com/hk_en/
MALAYSIA
1800-88-9999
www.samsung.com
SINGAPORE
1800-SAMSUNG (7267864)
www.samsung.com
Code No. DA68-00682F REV(0.0)
DJ68-00682F(0.0).indd 48
2012.9.7 9:17:23 AM