Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
HTL2160
Contents
1 Important 3
3
3
4
4
2 Your SoundBar 5
5
5
5
6
3 Connect 7
7
Help and support Safety Care for your product Care of the environment Assemble your Soundbar Main unit Remote control Connectors Placement Connect audio from TV and other
devices 7
4 Use your SoundBar 9
9
9
9
9
10
10
10
5 Wall mount 11
6 Product specifications 12
7 Troubleshooting 13
8 Notice 14
14
14
Adjust the volume Choose your sound MP3 player USB storage devices Auto standby Play audio through Bluetooth Apply factory settings Compliance Trademarks EN
2
1Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Help and support
Philips provides extensive online support. Visit
our website at www.philips.com/support to:
• download the user manual and the quick
start guide
• watch video tutorials (available only for
selected models)
• find answers to frequently answered
questions (FAQs)
• email us a question
• chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact
Philips, note down the model number and
serial number of your product. You can find this
information on the back or bottom of your
product.
Safety
Risk of electric shock or fire!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
3
EN
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the SoundBar!
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
• Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
•
Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Help and support
Philips provides extensive online support. Visit
our website at www.philips.com/support to:
• download the user manual and the quick
start guide
• watch video tutorials (available only for
selected models)
• find answers to frequently answered
questions (FAQs)
• email us a question
• chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact
Philips, note down the model number and
serial number of your product. You can find this
information on the back or bottom of your
product.
Care for your product
Use only microfiber cloth to clean the product.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
EN
4
2 Your SoundBar
Congratulations on your purchase, and
welcome to Philips! To fully benefit from
the support that Philips offers, register your
SoundBar at www.philips.com/welcome.
• AUDIO-IN: Lights up when you switch
to the audio input source.
f SURR
Lights up when you select Virtual Surround
sound.
g Bluetooth
Lights up when you switch to the
Bluetooth mode.
Assemble your Soundbar
Assemble your SoundBar as described in the
quick start guide (Step 1).
Main unit
Remote control
This section includes an overview of the
remote control.
This section includes an overview of the main
unit.
a
b
a
c
l
b
c
d
a
e
d
j
e
i
f
h
g
f g
Switch the SoundBar on or to standby.
b VOLUME +Increase or decrease volume.
c SOURCE
Select an audio source for the SoundBar.
d Power
Lights up when you switch on the
SoundBar.
e Source indicators
• COAX/OPT/AUX: Lights up when
you switch to coaxial, optical or analog
audio input source.
• USB: Lights up when you switch to the
USB source.
5
k
EN
a
(Standby-On)
Switch the SoundBar on or to standby.
Top connectors
b COAX
Switch your audio source to the coaxial
connection.
c USB
Switch your audio source to the USB
connection.
d OPTICAL
Switch your audio source to the optical
connection.
a
a
b
(USB)
Audio input from a USB storage device.
e Bluetooth
Switch to Bluetooth mode.
b AUDIO-IN
Audio input from an MP3 player (3.5mm
jack).
f TREBLE +/Increase or decrease treble.
Rear connectors
g SURR
Toggle between stereo and virtual
surround sound.
h
Mute or restore volume.
i BASS +/Increase or decrease bass.
j VOLUME +/Increase or decrease volume.
k AUDIO-IN
Switch your audio source to audio in
connection.
l AUX
Switch your audio source to the AUX
connection.
Connectors
This section includes an overview of the
connectors available on your SoundBar.
d
a b
e
c
a AUDIO IN
Connect to an analog audio output on the
TV or an analog device.
b DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
c DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
d SUBWOOFER
Connect to the supplied subwoofer.
e AC MAINS~
Connect to the power supply.
EN
6
3Connect
This section helps you connect your SoundBar
to a TV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•• For identification and supply ratings, refer to the type
plate at the back or bottom of the product.
•• Before you make or change any connections, make sure
Connect audio from TV and
other devices
Play audio from TV or other devices through
your Soundbar speakers.
Use the best quality connection available on
your TV, Soundbar, and other devices.
Option 1: Connect audio through a
digital optical cable
Best quality audio
that all devices are disconnected from the power outlet.
TV
Placement
Place the subwoofer at least 1 meter (3 feet)
away from your SoundBar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
1
Using an optical cable, connect the
OPTICAL connector on your SoundBar to
the OPTICAL OUT connector on the TV
or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1
7
EN
Using a coaxial cable, connect the
COAXIAL connector on your SoundBar
to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on the TV or
other device.
DVD
EN
8
4 Use your
SoundBar
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1
This section helps you use the SoundBar to play
audio from connected devices.
Press TREBLE +/- or BASS +/- to change
the frequency.
»» All Source indicators on the main unit
blink twice when treble or bass is set
to the maximum or minimum value.
Before you start
• Make the necessary connections described
in the quick start guide or download
the user manual from www.philips.com/
support.
• Switch the SoundBar to the correct source
for other devices.
MP3 player
Adjust the volume
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Press VOLUME +/- to increase or
decrease a volume level.
• To mute sound, press (MUTE).
• To restore the sound, press (MUTE)
again or press VOLUME +/-.
»» All Source indicators on the main unit
blink twice when a volume is set to the
maximum or minimum value.
Connect your MP3 player to play your audio
files or music.
1
2
3
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
Press AUDIO-IN.
Press the buttons on the MP3 player to
select and play audio files or music.
USB storage devices
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
9
Press SURR to select a surround mode.
• [Virtual Surround]: Creates a highly
surround listening experience. The
SURR indicator on the main unit lights
up.
• [Stereo]: Two-channel stereo sound.
Ideal for listening to music.
EN
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted
for FAT file systems, and complies with the
Mass Storage Class.
• An MP3 or WMA file on a USB storage
device
1
2
Connect a USB storage device to the
SoundBar.
Press USB on the remote control.
»» The play starts after a few seconds.
Note
•• This product may not be compatible with certain types
of USB storage device.
•• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•• Digital camera PTP protocols are not supported.
•• Do not remove the USB storage device while it is
being read.
•• DRM-protected music files (MP3, WMA) are not
supported.
•• Support a USB port: 5V , 500mA.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
• no button is pressed for 30 minutes, and
• no audio play from a connected device.
3
4
5
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 2.1 + EDR.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1
2
Press Bluetooth on the remote control to
switch the SoundBar to Bluetooth mode.
»» The Bluetooth indicator blinks at a fast
rate.
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
HTL2160 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
• When prompted for a password, enter
"0000".
»» During connection, the indicator blinks
at a lower rate.
Wait unitl the Bluetooth connection is
completed.
»» When the Bluetooth connection
succeeds, and the Bluetooth indicator
lights up.
»» If the connection fails, the Bluetooth
indicator blinks continually at a lower
rate.
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•• The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•• If you want to connect your SoundBar with another
Bluetooth device, disable the currently connected
Bluetooth device.
•• Philips does not guarantee 100% compatibility with all
Bluetooth devices.
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
1
In mute mode, quickly press AUX twice.
»» The factory settings is restored.
EN
10
5 Wall mount
Note
•• Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
•• Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
3 - 3.5mm
> 25mm
For information about how to wall mount your
SoundBar, see the quick start guide.
11
EN
6Product
specifications
Bluetooth
••
••
Bluetooth profiles: A2DP
Bluetooth version: 2.1 + EDR
Main unit
Note
•• Specifications and design are subject to change without
notice.
Amplifier
•
•
•
•
Total output power: 60W RMS (+/- 0.5 dB,
10% THD)
Frequency response: 20 Hz-20 kHz /
±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
• AUX: 2 V
• AUDIO-IN: 1V
Audio
•
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
•
•
•
•
•
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
File system: FAT16 and FAT32
Supports MP3 and WMA file formats
Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
Version:
• WMA: V7, V8, V9
••
••
••
•
•
••
••
••
•
•
Power supply: 220-240 V~, 50 Hz - 60 Hz
Power consumption: 30 W
Standby power consumption: ≤ 0.5 W
Speaker impedance: 8 ohm (Tweeter),
4 ohm (Woofer)
Frequency response: 160 Hz-20 kHz
Dimensions (WxHxD):
800 x 75.6 x 52.4 mm
Weight: 1.2 kg
Operating temperature and humidity:
0°C to 40°C, 5% to 90% Humidity for all
climates
Storage temperature and humidity: -40 °C
to 70 °C, 5% to 95%
Subwoofer
•
•
•
•
•
•
Impedance: 8 ohm
Speaker drivers: 130 mm (5.25") woofer
Frequency response: 45 Hz-200 Hz
Dimensions (WxHxD):
165 x 240 x 295 mm
Weight: 2.6 kg
Cable length: 3 m
Remote control batteries
•
1 x CR2025
EN
12
7Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Main unit
The buttons on the SoundBar do not work.
• Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
Sound
No sound from SoundBar speakers.
• Connect the audio cable from your
SoundBar to your TV or other devices.
• Reset your SoundBar to its factory settings.
• On the remote control, select the correct
audio input.
• Make sure that the SoundBar is not muted.
Distorted sound or echo.
• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Bluetooth
A device cannot connect with the SoundBar.
• The device does not support the
compatible profiles required for the
SoundBar.
• You have not enabled the Bluetooth
function of the device. See the user manual
13
EN
•
•
of the device on how to enable the
function.
The device is not correctly connected.
Connect the device correctly. (see 'Play
audio through Bluetooth' on page 10)
The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the SoundBar.
8Notice
This section contains the legal and trademark
notices.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, Philips Consumer Lifestyle, declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity
is available in the Portable Document Format
(PDF) version of the user manual at www.
philips.com/support.
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
EN
14
Philips Consumer Lifestyle B.V.
2012/10
15
(Document No.)
(Year, Month (yyyy/mm) in which the CE mark is affixed )
EUROPEAN DECLARATION OF CONFORMITY
We, PHILIPS CONSUMER LIFESTYLE B.V.
(Company name)
TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS
(address)
Philips
HTL2160/12, HTL2160C/12
HTL2160W/12, HTL2160T/12
HTL2160G/12,HTL2160M/12
HTL2160S/12
(brand name)
(Type version or model)
declare under our responsibility that the product(s):
SOUNDBAR SPEAKER
(product description)
to which this declaration relates is in conformity with the following harmonized standards:
EN60065:2002+A1:2006+A11:2008+A2:2010+A12:2011
EN 55013:2001+A1: 2003+A2:2006, EN 55020:2007+A11:2011
EN61000-3-2:2006+A1:2009+A2:2009,EN61000-3-3:2008
EN62301:2005, EN62311:2008
EN 300328 V1.7.1:2006
EN 301489-1 V1.9.2: 2011, EN 301489-17 V2.1.1: 2009
EN50581:2012
following the provisions of :
1999/5/EC
2006/95/EC
2004/108/EC
2011/65/EU
2009/125/EC - EC/1275/2008
And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents
Only for Medical Devices and R&TTE products:
The Notified Body:
Telefication/CE0560
performed:
(Name and number)
and issued the certificate:
12214160/AA/00
(certificate number)
Remarks:
Drachten, 20-jun-13
(place,date)
15
A.Speelman, CL Compliance Manager
(signature, name and function)
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
HTL2160_12_UM_V3.0