CPC
CPC Pipe Cable Cover Kit Installation Instructions
The CPC Pipe Cable Covers fit over pipes and tubing. Conceal cables and electrical conduits by running them alongside the pipe or tubing. The CPCs fit
1½” pipes, 2” pipes, 2” tubing, 1”x1” square tubing, and Premier Mounts’ elliptical tubing.
Step 1
After you have completed installing the A/V components, choose the appropriate CPC length for the pipe or tubing.
You may use multiple CPCs together to conceal all cable and electrical wiring.
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada
Phone: 1.800.368.9700
Fax: 1.800.832.4888
Other Locations – Phone: (001).714.632.7100; Fax: (001).714.632.1044 ©Premier Mounts 2010
Parts List
12” CPC (Qty 4)
2” CPC (Qty 2) or
Step 2
Clasp the CPC over the cabling or wiring, and pipe or tubing (Figure 1).
Make sure the pipe or tubing is outside the inner ribs of the CPC (Figure 2).
Step 3
Clasp additional CPCs as needed.
Clasp multiple CPCs over the pipe or tubing to cover the length of the cabling and/or wiring.
Clasp the CPC over the wide side of the elliptical tubing (Figure 2).
Rib
Pipe or Tubing
Elliptical Tubing
Figure 1
Installation Instructions
9533-040-001-00
Figure 2
Visit the Premier Mounts website at http://www.mounts.com
Page 1