Always there to help you
Register your product and get support at
www.philips.com/welcome
HMP2000
Question?
Contact
Philips
User manual
Manual del usuario
HMP2000_55_UM_V1.0.indb 1
9
Manual do Usuário
63
35
2012/8/22 11:34:09
Trademark notice
HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HMP2000_55_UM_V1.0.indb 2
2012/8/22 11:34:10
or
ntries.
HMP2000_55_UM_V1.0.indb 3
EN
ES
PT
3
Setup:
Connect to Wi-Fi
Configuración: conectar a Wi-Fi
Configuração: conectar Wi-Fi
EN If you select [Standard], enter your
2012/8/22 11:34:11
Switch on
Encender
Ligar
Initia
HDMI
Please s
HDMI IN
Scan
M
SOURCE
TV
EN Press to switch on.
» The power indicator lights up white.
On the remote control of the TV, use the source button to
select the HDMI input channel of HMP2000.
ES
PT
Pulse para encender.
» El indicador de encendido se enciende en blanco.
En el control remoto de su televisor, utilice el botón de
fuente para seleccionar el canal de entrada HDMI de
HMP2000.
PIN
Pressione para ligar.
» As luzes indicadoras de energia acenderam em branco.
No controle remoto da TV, use o botão de fonte para
selecionar o canal de entrada HDMI do HMP2000.
4
rHMP2000_55_UM_V1.0.indb
Navigate
4
Navegar
Navegar
2012/8/22 11:34:12
Configuración: conectar a Wi-Fi
Configuração: conectar Wi-Fi
Eng lis h
Setup:
Connect to Wi-Fi
Initial Setup
Menu Language
Wireless
HDMI
WWW
Please select the Wi-Fi configuration
Scan Wi-Fi (Recommended)
:36
Manual
(Advanced)
EN Add HMP2000 to the router:
for example, press and hold
the PBC button on the router
(consult the user manual of
your router).
On HMP2000, select PBC.
ES
Agregue HMP2000 al router:
por ejemplo, mantenga presionado el botón PBC del router
(consulte el manual del usuario
de su router).
En HMP2000, seleccione PBC.
PT
Adicione o HMP2000 ao roteador: por exemplo, mantenha
pressionado o botão PBC do
roteador (consulte o manual
do usuário do roteador).
No HMP2000, selecione PBC.
n to
PINPBCStandard
nco.
HMP2000_55_UM_V1.0.indb 5
EN
Play
5
Reproducción
Reproduzir
2012/8/22 11:34:14
Setup:
Connect to Wi-Fi
PINPBCStandard
OK
Configuración: conectar a Wi-Fi
Configuração: conectar Wi-Fi
EN If you select [Standard], enter your
password:
1 On the remote control, press
/ to select an input mode.
and
2 To enter text, press
OK to select a key on the onscreen keyboard. To complete text
entry, select OK on the onscreen
keyboard.
$%& DEF (#
ES
PT
6
Si selecciona [Estándar], ingrese su
contraseña.
1 En el control remoto, presione
/ para seleccionar un modo de
entrada.
2 Para ingresar texto, presione
y OK para seleccionar una
tecla del teclado en pantalla. Para
terminar de escribir el texto, seleccione Aceptar en el teclado en
pantalla.
Ao selecionar [Padrão], insira sua senha:
1 No controle remoto, pressione
/ para selecionar um modo de
entrada.
2 Para inserir texto, pressione
e OK selecione uma tecla
do teclado na tela. Para concluir a
entrada de texto, selecione OK no
teclado na tela.
EN
ES
PT
EN
HMP2000_55_UM_V1.0.indb 6
2012/8/22 11:34:15
No controle remoto da TV, use o botão de fonte para
selecionar o canal de entrada HDMI do HMP2000.
TM
Accu
Weather
.com
TM
3
Play fr
servic
Accu
Web Albums
Weather
.com
Web Albums
EN
Navigate on the Home screen
Press to go to the Home screen. Press , and then,
or to select a functional menu. To select an option
in the menu, press , and then, or and OK.
ES
Navegar por la Pantalla de inicio
Presione para ir a la Pantalla de inicio. Presione
, y luego, o para seleccionar un menú funcional.
Para seleccionar una opción en el menú, presione , y
luego, o y OK.
de
una
ara
elecn
Eng lis h
EN
e.
and
text
een
e
Navegar
Navegar
Navigate
senha:
e
de
PT
a
uir a
K no
HMP2000_55_UM_V1.0.indb 7
EN
Play fr
device
Navegar na tela inicial
Pressione para acessar a tela inicial. Pressione e
ou para selecionar um menu funcional. Para selecionar uma opção no menu, pressione e ou e OK.
EN
7
2012/8/22 11:34:16
No HMP2000, selecione PBC.
Reproducción
Reproduzir
Play
EN
ES
PT
Play from online
services
Reproducir desde
servicios en línea
Reproduzir conteúdo
de serviços on-line
TM
HDMI
Accu
Weather
.com
Web Albums
WWW
EN
ES
PT
Play from a USB
device
Reproducción de un
dispositivo USB
Reproduzir conteúdo
do dispositivo USB
86%
HDMI
8
EN
HMP2000_55_UM_V1.0.indb 8
2012/8/22 11:34:17
1Basics
Connect
11
11
Switch on or off
11
Navigate on the Home screen
12
Use the remote control
13
2 First-time setup
15
Connect to the Internet through Wi-Fi
15
3Play
18
Play from online services
18
Search for media files
19
Select play options
20
Manage files
21
4Setup
23
System
23
Audio
24
Video
24
Network
24
5EasyLink
25
HMP2000_55_UM_V1.0.indb 9
Eng lis h
Contents
EN
9
2012/8/22 11:34:17
6 Update the firmware of HMP2000
26
Update the firmware through the Internet
26
Update the firmware through a USB storage device
26
7Troubleshooting
27
8 Specification
28
10
EN
HMP2000_55_UM_V1.0.indb 10
2012/8/22 11:34:17
Eng lis h
1 Basics
Connect
HDMI
HDMI IN
b
a
a HDMI connector for audio/ video output
• Connects to a high-definition TV (HDTV) through an HDMI cable
b Power connector
• Connects to power supply through the AC/DC adapter
Switch on or off
1
2
On HMP2000, press on the remote control to switch on.
»» The power indicator lights up white.
On the TV, switch to the input channel of HMP2000:
• On the remote control of your TV, use the source button to select the
input channel of HMP2000.
HMP2000_55_UM_V1.0.indb 11
EN
11
2012/8/22 11:34:18
HDMI
SOURCE
TV
3
To switch HMP2000 to standby mode, press
»» The power indicator lights up red.
again on the remote control.
Auto standby
From the Home screen, switch on [Automatic Standby]in[Setup] > [System].
If there is no button press or media play on HMP2000 for 15 minutes, HMP2000
switches to standby mode automatically except when:
• You enter text on the onscreen keyboard.
Screen saver
From the Home screen, go to[Setup] > [System] to switch on [Screen Saver
Delay].
If there is no button press or media play on HMP2000 for a selected time
duration, the screen saver is activated. To exit the screen saver, press any button on
the remote control.
Navigate on the Home screen
TM
Accu
Weather
.com
12
TM
3
Accu
Web Albums
Weather
.com
Web Albums
EN
HMP2000_55_UM_V1.0.indb 12
2012/8/22 11:34:19
2
On the remote control, press to go to the Home screen.
»» On the Home screen, you can find the following menus:
: Online services
: Connected storage devices, such as a USB storage device
: Setup menu
Eng lis h
1
Select a menu:
a If necessary, press .
»» Current menu is highlighted.
b On the remote control, press or to select a menu.
»» Options in the menu are displayed.
3
Select an option in the menu:
a Press .
»» Current option is highlighted.
b Press
or
and OK.
Use the remote control
Switch HMP2000 on or to standby mode
• Press
Navigate between screens or through options
• Return to the Home screen
• Navigate through options
OK
• Confirm the option
• Back one level or exit (except in some online services)
View options menu for media play or file navigation
• Press
Connect toNETFLIX (online video service)
• Press
Control the play
HMP2000_55_UM_V1.0.indb 13
EN
13
2012/8/22 11:34:20
•
•
•
•
•
•
Start, pause, or resume the play
/
/
Stop the play
Skip to the previous/ next media file
/
Search backwards or forwards within current file
Press repeatedly to select a search speed
Rotate a photo
• Display the information about current file during play
SUBTITLE
• Access subtitle options
Remove the connected USB device safely
• Press and hold and select the option
Manage files/folders underon the connected storage devices
• Press EDIT
Enter text
With the onscreen keyboard, use the remote control to enter text.
OK
$%& DEF (#
Select input modes
• Press / on the remote control.
»» On the onscreen keyboard, current input mode is highlighted.
: English input in upper case
: English input in low case
: symbols
14
EN
HMP2000_55_UM_V1.0.indb 14
2012/8/22 11:34:23
Enter text
2
3
On the remote control, press
select the letter or symbol.
to move to a key, press OK to
Eng lis h
1
On the onscreen keyboard, select the input options by using the remote
control:
/
: Move the cursor to the left or right.
: Delete the entry before the cursor.
When the text entry is complete, select OK on the onscreen keyboard to
exit.
2 First-time setup
The first time you use HMP2000, do the following setup:
• In [Menu Language], select the menu language on HMP2000;
• In [Wireless], connect HMP2000 to your home network through Wi-Fi.
To exit the setup screen,
• On the remote control, press .
»» You enter the Home screen.
To change your setup options,
• From the Home screen, go to
[Setup].
Connect to the Internet through Wi-Fi
Connect HMP2000 to a wireless router (Access Point). You can connect
HMP2000 to the network that is built around the router.
To connect to the Internet, make sure that the router connects to the Internet
directly and no dial-up is required on the computer.
HMP2000_55_UM_V1.0.indb 15
EN
15
2012/8/22 11:34:24
Initial Setup
Menu Language
Wireless
HDMI
WWW
1
2
3
4
The first time you connect HMP2000 to power, select [Wireless] on the
first-time setup page.
»» A pop-up screen is displayed for you to select connection options.
On the pop-up screen, select [Scan Wi-Fi (Recommended)].
»» You can find a list of networks in range.
•
To refresh the list of networks, press EDIT on the remote control.
Select your network.
Select your connection option: PIN, PBC, or [Standard].
»» A message is displayed when the connection is complete.
»» Next time you switch on HMP2000, HMP2000 connects to the
previously connected network automatically.
Note
•• If MAC address filtering is enabled on your router, add the MAC address of HMP2000 to the list
of allowed devices. To find the MAC address, go to
the Home screen.
> [Wireless (WiFi)]> [Network Info] from
Tip
•• If you have disabled SSID broadcasting or hidden the Service Set Identifier (SSID) of the router,
manually enter the SSID and password of the network. Go to [Wireless (WiFi)] andselect [Manual
(Advanced)].
One-touch Wi-Fi Protected Setup (WPS)
HMP2000 supports Wi-Fi Protected Setup(WPS). You can quickly and securely
connect HMP2000 to a wireless router that also supports the WPS.
You can select one of the two setup methods: PBC (Push Button Configuration),
or PIN (Personal Identification Number).
16
EN
HMP2000_55_UM_V1.0.indb 16
2012/8/22 11:34:24
Tip
Eng lis h
•• Wi-Fi Protected Setup(WPS) is a standard created by Wi-Fi Alliance for easy establishment of
secure wireless home network.
PBC
HDMI
PINPBCStandard
1
2
On the router, add HMP2000:
• Consult the user manual of the router to learn how to add a WPS
device to the router. For example:
press and hold the WPS push button.
»» The router starts to search for HMP2000.
On HMP2000, select PBC.
»» On HMP2000, a message is displayed when the connection is
complete.
PIN
1
2
3
Write down the PIN that is displayed on HMP2000.
On your PC, enter the PIN on the router setup page:
• Consult the user manual of the router to learn how to enter the PIN
of the router.
On HMP2000, select PIN.
Standard
1
2
On HMP2000, select [Standard].
On the pop-up screen, enter the password to the network (see “Use the
remote control” on page 13).
HMP2000_55_UM_V1.0.indb 17
EN
17
2012/8/22 11:34:24
3Play
On the HDTV, enjoy media play from
• the online services, or
• a USB mass storage device.
Play from online services
Connect HMP2000 to the Internet. You can enjoy online services on the HDTV.
Note
•• Koninklijke Philips Electronics N.V. bears no responsibility for content provided by Net TV service
providers.
TM
HDMI
Accu
Weather
.com
Web Albums
WWW
1
On the Home screen, select an online service (see “Navigate on the Home
screen” on page 12):
a On the Home screen, select
, and then, press
.
b Select an option:
NETFLIX: Online video services
YouTube: Online video services
Facebook: Online social networking services
AccuWeather: Online weather forecast services
Piccasa: Online photo-sharing services
2
18
Use the remote control to select your options and control play:
• To select an option, press
and OK.
EN
HMP2000_55_UM_V1.0.indb 18
2012/8/22 11:34:25
To go back one level, press
To stop play, press .
(unavailable in some online services).
Eng lis h
•
•
Play from a USB mass storage device
Through the HDTV, play media from the USB mass storage device that you
connect to HMP2000.
86%
HDMI
86%
Folder
1
2
3
Movies
Music
Photos
On the Home screen, select the USB source.
»» Media files are sorted as follows:
[Folder]: Display all the files/ folders.
[Movies]: Display movie files.
[Music]: Display music files.
[Photos]: Display photo files.
Select a file to start play.
Use the remote control to control play (see “Use the remote control” on
page 13).
Search for media files
•
In the list of files or folders, press
to select your options:
In [Folder]:
To display files in different views,
• Select [Thumbnails], [List], or [Preview].
HMP2000_55_UM_V1.0.indb 19
EN
19
2012/8/22 11:34:26
To show files by media type,
• Select [All Media], [Movies], [Photos], or [Music].
In [Movies], [Music], and [Photos]:
To search for a file by keyword,
• Select[Search]. Enter the keyword on the onscreen keyboard.
To sort files in different ways,
• Select [Sort Order].
To go to the folder view,
• Select [Go to Folder].
Select play options
1
2
During play, press
on the remote control.
Press
to select an option. Press OK to confirm.
For videos,
[Subtitle]: Select a subtitle language
[Audio]: Select an audio language
[Night Mode]: (for audio encoded in Dolby Digital ): Makes loud sound level softer
and soft sound level louder so that you can enjoy videos at a low volume, without
disturbing others.
[GOTO]: Skip to the specific time, title, or chapter.
[Repeat Title]: Repeat current title.
[Repeat All]: Repeat all the flies.
[Repeat Off]: Switch off the repeat mode.
[Video Setting]: Select display options.
For music,
[Repeat Off]: Switch off the repeat mode.
[Repeat One]: Repeat current file.
[Repeat All]: Repeat all the flies.
[Shuffle Loop]: Play all the files in random order.
For photo slideshow,
[Slide Timing]: Set the time interval before one slide switches to another.
[Slide Transition]: Set the transition mode between two slides.
[Repeat Off]: Switch off the repeat mode.
[Repeat All]: Play photos in current folder repeatedly.
[Shuffle Loop]: Play photos in current folder in random order.
[Background Music]: Play a music file during the slideshow.
20
EN
HMP2000_55_UM_V1.0.indb 20
2012/8/22 11:34:26
Eng lis h
[Video Setting]: Select display options.
Manage files
On HMP2000, select USB on the Home screen. Go to [Folder], and you can
manage files on the connected USB storage device.
Copy or move files and folders
1
In [Folder], select a file or folder in the list of files/ folders.
To select multiple files,
a On the remote control, press EDIT.
»» A list of options is displayed.
b Select [Multiple Select].
»» A file list is created for you to add files or folders.
c Press
2
3
4
/
to select a file or folder. Press
to confirm.
On the remote control, press EDIT.
On the pop-up list of options, select [Copy] or [Move].
Select a folder as the destination. Press
to confirm.
»» The selected files or folders are copied or moved to the destination.
Delete files and folders
1
2
Follow Step 1-3 under "Copy or move files and folders" (see “Select play
options” on page 20).
On the pop-up list of options, select [Delete].
»» The selected files or folders are deleted.
Rename files and folders
1
In [Folder], select a file or folder in the list of files/ folders.
HMP2000_55_UM_V1.0.indb 21
EN
21
2012/8/22 11:34:26
2
3
4
On the remote control, press EDIT.
On the pop-up list of options, select [Rename].
On the pop-up onscreen keyboard, edit the file/ folder name (see “Enter
text” on page 14).
Create music playlists
You can create playlists for music files you want to play together.
1
In [Folder], select music files.
a On the remote control, press EDIT.
»» A list of options is displayed.
b Select [Multiple Select].
»» A file list is created for you to add files.
c Press
2
3
4
/
to select a file. Press
to confirm.
On the remote control, press EDIT.
On the pop-up list of options, select [Save Playlist].
Name the playlist as needed.
»» A music playlist is created.
Create photo albums
You can create photo albums for picture files.
1
In [Folder], select picture files.
a On the remote control, press EDIT.
»» A list of options is displayed.
b Select [Multiple Select].
»» A file list is created for you to add files.
c Press
2
3
22
/
to select a file. Press
to confirm.
On the remote control, press EDIT.
On the pop-up list of options, select [Save Photo Album].
EN
HMP2000_55_UM_V1.0.indb 22
2012/8/22 11:34:26
Name the photo album as needed.
»» A photo album is created.
Eng lis h
4
4Setup
You can change the setup options of HMP2000.
1
2
On the Home screen, select [Setup].
• If necessary, press on the remote control to go to the Home screen.
»» The setup menu is displayed.
Press
• Press
to select an option. Press OK to confirm the option.
to return to the upper-level menu.
System
[Menu Language]: Select the language for onscreen menus.
[Subtitle]: Select the subtitle language for videos.
[Screen Saver Delay]: Enable the screen saver when HMP2000 is in the idle
mode for a selected time span, for example, in pause or stop mode. To exit
the screen saver mode, press any key.
[Automatic Standby]: Switch HMP2000 to standby mode when there is no
button press or media play on HMP2000 for 15 minutes.
[Request to Resume Play]: Allow you to select whether to resume video
play from the last stop position.
[Netflix Deactivate]: Deactivate the Netflix service.
[Reset Factory Defaults]: Restore fac tory settings.
HMP2000_55_UM_V1.0.indb 23
EN
23
2012/8/22 11:34:26
Audio
[HDMI Audio Mode]: Select audio output for the HDMI connector.
[Lip Sync]: Synchronize audio with video play.
Video
[Aspect Ratio]: Select display aspect ratio.
[TV System]: Select the video resolution that your TV supports. See your TV
manual for details.
*[1080P 24Hz]: Use 1080p 24 Hz for video output, where 1080p 24 Hz
denotes the resolution and frame rate.
[Deep Color]: Display colors with more shades and hues when the video
content is recorded in Deep Color mode and the TV supports this feature.
Note
•• *If the video resolution is incompatible with your TV, you can see a blank screen. To recover the
display, wait for 10 seconds.
Network
[Wireless (WiFi)]: Connect to a Wi-Fi network.
[Network Info]: Display current network status, such as the MAC address,
and current IP address and subnet mask.
24
EN
HMP2000_55_UM_V1.0.indb 24
2012/8/22 11:34:26
Eng lis h
5EasyLink
HMP2000 supports Philips EasyLink which uses the HDMI CEC (Consumer
Electronics Control) protocol. You can use a single remote control to control
EasyLink compliant devices that are connected through HDMI.
1
2
3
4
Through HDMI, connect HMP2000 to a TV compliant with the HDMI CEC
protocol.
On the TV, switch on the functions to allow HDMI CEC operations (Consult
the user manual of the TV).
On HMP2000, switch on [Easy Link].
• On the Home screen, select [Setup] > [Easy Link]. Select [On].
In [Easy Link], you can select the following options:
[One Touch Play]
When you start play on HMP2000, the TV switches to the HDMI input channel
automatically.
[One Touch Standby]
When you switch the TV to the standby mode, HMP2000 switches to the
standby mode automatically.
[Auto Power On From TV]
When you switch to the input channel of HMP2000 on the TV, HMP2000 can
switch on automatically from the standby mode.
Note
•• Philips does not guarantee 100% interoperability with all HDMI CEC devices.
HMP2000_55_UM_V1.0.indb 25
EN
25
2012/8/22 11:34:26
6 Update the firmware of
HMP2000
Switch on [Auto Upgrade Reminder]in [Setup] > [Software Upgrade]. You can
receive a reminder when firmware updates are available and you have connected
HMP2000 to the Internet.
Before you update the firmware, check current the firmware version of HMP2000.
To check the firmware version,
• On the Home screen, go to [Setup]> [Software Upgrade] >
[Version Info].
Update the firmware through the Internet
1
2
3
Connect HMP2000 to the Internet.
On the Home screen of HMP2000, select [Setup] > [Software Upgrade] >
[Check for Online Upgrades].
»» If a firmware update is detected, you are prompted to start the update.
Follow onscreen instructions to complete the update.
»» When the update is complete, HMP2000 switches off automatically, and
then switches on again.
Update the firmware through a USB storage device
1
On your computer, do the following:
a Go to www.philips.com/support to find the latest firmware.
b Search for your model and click on "Software and drivers".
c Download the firmware update and save the file to the root
directory of a USB storage device.
26
EN
HMP2000_55_UM_V1.0.indb 26
2012/8/22 11:34:27
2
On HMP2000, do the following:
a Connect the USB storage device.
b On the Home screen, select [Setup] > [Software Upgrade]> [USB
upgrade].
»» If a firmware update is detected, you are prompted to start the
update.
3
Follow onscreen instructions to complete the update.
»» When the update is complete, HMP2000 switches off automatically, and
then switches on again.
Caution
•• Keep HMP2000 powered on and the storage device mounted before the firmware update is
complete.
7Troubleshooting
If you contact Philips, you will be asked for the model and serial number of this
player. The model number and serial number are at the bottom of this player.
Write the numbers here:
Model No. __________________________
Serial No. ___________________________
No picture.
• Refer to the TV user manual for how to select the correct video input
channel
The contents of the USB storage device cannot be read.
• The format of this USB storage device is not supported.
• The supported memory size is 1TB maximum.
• Make sure that this player supports these files. (Refer to "Specifications" >
"Playable media") .
HMP2000_55_UM_V1.0.indb 27
2012/8/22 11:34:27
8 Specification
Note
•• Specification and design are subject to change without notice.
Power adapter
• Philips ASUC 12A-050150(/37, /55), Philips ASUC 12E-050150(/12)
• Input: 100-240 V~ 50/60 Hz, 0.3 A
• Output: DC 5.0 V, 1500 mA
Power consumption < 7.5 W
Power consumption in standby mode < 1 W
Remote control Battery type: AAA
Supported formats:
• Video: MPEG 1/2, H.264, VC-1, WMV9, MKV, MPG, AVCHD, AVI, TS,
M2TS, TP, IFO, ISO, VOB, DAT, MP4, MPEG, MOV (H.264), ASF, FLV(640
x 480)
• Audio: Dolby Digital, MPEG Audio, AAC, OGG, MKA, IMP/MS ADPCM,
AC3, WMA (V9), PCM, LPCM, MP3
• Picture: JPEG, JPG, BMP, GIF (unanimated GIF), HD-JPEG, PNG, TIF, TIFF
HDD & USB support
• NTFS, FAT32, FAT, EXT-3, HFS+
• USB MTP support, USB PTP support, USB MSC support
Subtitle support
• .srt, .sub, .smi, .ssa, idx+.sub
Video
• HDMI output: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1080p24
Audio
• HDMI output
• Signal to noise ratio (1 kHz): > 90 dB (A-weighted)
• Dynamic Range (1 kHz): > 80 dB (A-weighted)
• Frequency response: +/-0.2 dB
Main Unit
• Dimensions (L x W x H): 136 x 86 x 52 mm
• Net Weight: 0.41 Kg
28
EN
HMP2000_55_UM_V1.0.indb 28
2012/8/22 11:34:27
NOTICE
SOFTWARE END USER LICENSE AGREEMENT
THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”)
IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN
INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER LIFESTYLE B.V. A
DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT
HIGH TECH CAMPUS 37, 5656 AE EINDHOVEN, THE NETHERLANDS
AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY
“PHILIPS”). THIS AGREEMENT GIVES YOU THE RIGHT TO USE CERTAIN
SOFTWARE (THE “SOFTWARE”) INCLUDING USER DOCUMENTATION
IN ELECTRONIC FORM WHICH MAY HAVE BEEN PROVIDED SEPARATELY
OR TOGETHER WITH A PHILIPS PRODUCT (THE “DEVICE”) OR A PC. BY
DOWNLOADING, INSTALLING OR OTHERWISE USING THE SOFTWARE,
YOU ACCEPT AND AGREE TO BE BOUND BY ALL OF THE TERMS AND
CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THESE
TERMS AND CONDITIONS, DO NOT DOWNLOAD, INSTALL OR
OTHERWISE USE THE SOFTWARE. IF YOU ACQUIRED THE SOFTWARE IN
TANGIBLE MEDIA E.G. CD WITHOUT THE OPPORTUNITY TO REVIEW THIS
LICENSE AND DO NOT ACCEPT THESE TERMS, YOU MAY RECEIVE A FULL
REFUND OF THE AMOUNT, IF ANY, THAT YOU PAID FOR THE SOFTWARE
IF YOU RETURN THE SOFTWARE UNUSED WITH PROOF OF PAYMENT
WITHIN 30 DAYS FROM THE DATE OF PURCHASE.
1. Grant of License. This Agreement grants you a non-exclusive, nontransferable,
non-sub licensable license to install and use, on the Device or a PC, as
applicable, one (1) copy of the specified version of the Software in object
code format as set out in the user documentation solely for your personal
use. The Software is “in use” when it is loaded into the temporar y or
permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device.
2.
Ownership. The Software is licensed and not sold to you. This Agreement
grants you only the right to use the Software, but you do not acquire any
rights, express or implied, in the Software other than those specified in this
Agreement. Philips and its licensors retain all right, title, and interest in and
to the Software, including all patents, copyrights, trade secrets, and other
intellectual property rights incorporated therein. The Software is protected by
copyright laws, international treaty provisions, and other intellectual property
laws. Therefore, other than as expressly set forth herein, you may not copy the
HMP2000_55_UM_V1.0.indb 29
2012/8/22 11:34:27
Software without prior written authorization of Philips, except that you may
make one (1) copy of the Software for your back-up purposes only. You may
not copy any printed materials accompanying the Software, nor print more
than one (1) copy of any user documentation provided in electronic form,
except that you may make one (1) copy of such printed materials for your
back-up purposes only.
3.
License Restrictions. Except as provided otherwise herein, you shall not rent,
4.
Termination of certain functionality. The Software may contain components
30
lease, sublicense, sell, assign, loan, or otherwise transfer the Software. You shall
not, and you shall not permit any third party, to reverse engineer, decompile,
or disassemble the Software, except to the extent that applicable law
expressly prohibits the foregoing restriction. You may not remove or destroy
any product identification, copyright notices, or other proprietary markings
or restrictions from the Software. All titles, trademarks, and copyright and
restricted rights notices shall be reproduced on your back up copy of the
Software. You may not modify or adapt the Software, merge the Software into
another program or create derivative works based upon the Software.
of cer tain licensed software including software licensed from Microsoft
Corporation (“Microsoft”) which implements Microsoft’s digital rights
management technology for Windows Media. Content providers are using
the digital rights management technology for Windows Media (“WMDRM”) to protect the integrity of their content (“Secure Content”) so
that their intellectual property, including copyright, in such content is not
misappropriated. Your Device may also use WM-DRM software to transfer
or play Secure Content (“WM-DRM Software”). If the security of such WMDRM Software is compromised, Microsoft may revoke (either on its own
or upon the request of the owners of Secure Content (“Secure Content
Owners”)) the WM-DRM Software’s right to acquire new licenses to copy,
store, transfer, display and/or play Secure Content. Revocation does not alter
the WM-DRM Software’s ability to play unprotected content. A list of revoked
WM-DRM Software is sent to your PC and/or your Device whenever you
download a license for Secure Content. Microsoft may, in conjunction with
such license, also download revocation lists onto your Device on behalf of
Secure Content Owners, which may disable your Device’s ability to copy,
store, display, transfer, and/or play Secure Content. Secure Content Owners
may also require you to upgrade some of the WM-DRM components
distributed with this Software (“WM-DRM Upgrades”) before accessing their
content. When you attempt to play Secure Content, WM-DRM Software built
by Microsoft will notify you that a WM-DRM Upgrade is required and then
EN
HMP2000_55_UM_V1.0.indb 30
2012/8/22 11:34:27
ask for your consent before the WM-DRM Upgrade is downloaded. WMDRM Software built by Philips may do the same. If you decline the upgrade,
you will not be able to access Secure Content that requires the WM-DRM
Upgrade; however, you will still be able to access unprotected content and
Secure Content that does not require the upgrade. WM-DRM features
that access the Internet, such as acquiring new licenses and/or performing a
required WM-DRM Upgrade, can be switched off. When these features are
switched off, you will still be able to play Secure Content if you have a valid
license for such content already stored on your Device. However, you will
not be able to use certain of the WM-DRM Software features that require
Internet access such as the ability to download content that requires the WMDRM Upgrade. All title and intellectual property rights in and to the Secure
Content is the property of the respective Secure Content owners and may
be protected by applicable copyright or other intellectual property laws and
treaties. This Agreement grants you no rights to use such Secure Content. To
summarize, if the Software contains Microsoft WM-DRM components –
Secure Content you desire to download, copy, store, display, transfer, and/or
play is protected by the Microsoft WM-DRM components of the Software.
Microsoft, Secure Content Owners, or Secure Content distributors may
deny you access, or restrict your access, to Secure Content even after you
have paid for, and/or obtained, it. Neither your consent nor the consent
or approval of Philips is necessary for any of them to deny, withhold or
otherwise restrict your access to Secure Content. Philips does not guaranty
that you will be able to download, copy, store, display, transfer, and/or play
Secure Content.
5.
Open Source Software. (a) This software may contain components that are
subject to open-source terms, as stated in the documentation accompanying
the Device. This Agreement does not apply to this software as such. (b)
Your license rights under this Agreement do not include any right or license
to use, distribute or create derivative works of the Software in any manner
that would subject the Software to Open Source Terms. “Open Source
Terms” means the terms of any license that directly or indirectly (1) create, or
purport to create, obligations for Philips with respect to the Software and/or
derivative works thereof; or (2) grant, or purport to grant, to any third party
any rights or immunities under intellectual property or proprietary rights in
the Software or derivative works thereof.
HMP2000_55_UM_V1.0.indb 31
2012/8/22 11:34:27
6.Termination. This Agreement shall be effective upon installation or first use of
the Software and shall terminate (i) at the discretion of Philips, due to your
failure to comply with any term of this Agreement; or (ii) upon destruction
of all copies of the Software and related materials provided to you by Philips
hereunder. Philips’s rights and your obligations shall survive the termination of
this Agreement.
7.Upgrades. Philips may, at its sole option, make upgrades to the Software
available by general posting on a website or by any other means or methods.
Such upgrades may be made available pursuant to the terms of this
Agreement or the release of such upgrades to you may be subject to your
acceptance of another agreement.
8.
Support Services. Philips is not obligated to provide technical or other support
9.
Limited Software Warranty. Philips provides the Software ‘as is’ and without any
32
(“Suppor t Ser vices”) for the Software. If Philips does provide you with
Support Services, these will be governed by separate terms to be agreed
between you and Philips.
warranty except that the Software will perform substantially in accordance
with the documentation accompanying the Software for a period of one
year after your first download, installation or use of the Software, whichever
occurs first. Philips’ entire liability and your exclusive remedy for breach of
this warranty shall be, at Philips’ option, either (i) return of the price paid by
you for the Software (if any); or (b) repair or replacement of the Software
that does not meet the warranty set forth herein and that is returned to
Philips with a copy of your receipt. This limited warranty shall be void if failure
of the Software has resulted from any accident, abuse, misuse or wrongful
application. Any replacement Software will be warranted for the remainder
of the original warranty period or thirty (30) days, whichever is longer. This
limited warranty shall not apply to you if the Software was provided to you
free of charge on an evaluation only basis.
EN
HMP2000_55_UM_V1.0.indb 32
2012/8/22 11:34:27
10. NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, PHILIPS AND
ITS LICENSORS DO NOT WARRANT THAT THE SOFTWARE WILL
OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL MEET YOUR
REQUIREMENTS. YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION
OF THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR
THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE
SOFTWARE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, PHILIPS AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND
CONDITIONS, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND ACCURACY OR
COMPLETENESS OF RESULTS WITH RESPECT TO THE SOFTWARE AND
THE ACCOMPANYING MATERIALS. THERE IS NO WARRANTY AGAINST
INFRINGEMENT. PHILIPS DOES NOT WARRANT THAT YOU WILL BE
ABLE TO DOWNLOAD, COPY, STORE, DISPLAY, TRANSFER, AND/OR
PLAY SECURE CONTENT.
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS
OR ITS LICENSORS BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL,
INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOEVER,
INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
PROFITS OR REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER PECUNIARY
LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL PHILIPS’ OR ITS
LICENSORS’ AGGREGATE LIABILITY FOR DAMAGES ARISING OUT OF
THIS AGREEMENT EXCEED THE GREATER OF THE PRICE ACTUALLY
PAID BY YOU FOR THE SOFTWARE OR FIVE POUNDS STERLING (5.00).
12.Trademarks. Certain of the product and Philips names used in this Agreement,
the Software, and the printed user documentation may constitute trademarks
of the Philips, its licensors or other third parties. You are not authorized to use
any such trademarks.
HMP2000_55_UM_V1.0.indb 33
2012/8/22 11:34:27
13. Export Administration. You agree that you will not directly or indirectly, export
or re-export the Software to any country for which the United States Export
Administration Act, or any similar United States law or regulation requires an
export license or other U.S. Government approval, unless the appropriate
expor t license or approval has first been obtained. By downloading or
installing the Software you agree to abide by this Export provision.
14. Governing law. This Agreement is governed by the laws of your country of
residence , without reference to its conflict of laws principles. Any dispute
between you and Philips regarding this Agreement shall be subject to the nonexclusive jurisdiction of the courts of your country of residence.
15.General. This Agreement contains the entire agreement between you and
Philips and supersedes any prior representation, under taking or other
communication or adver tising with respect to the Software and user
documentation. If any part of this Agreement is held invalid, the remainder of
this Agreement will continue in full force and effect. This Agreement shall not
prejudice the statutory rights of any party dealing as a consumer.
EULA-English (UK)
September 2011
34
EN
HMP2000_55_UM_V1.0.indb 34
2012/8/22 11:34:27
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
HMP2000_55_UM_V1.0 wk1234.2
HMP2000_55_UM_V1.0.indb 92
2012/8/22 11:34:47