E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
Contents
Channel Setting
Preference Features
Advanced Features
• Using the INFO button (Now & Next guide)
1
• Connecting to the Network
59
• Using the 3D function
125
• Using Channel menu
2
• Setting the Wired Network
77
• Using the Media Contents
136
• Setting the Wireless Network
81
• Connecting a USB Device
137
• Managing the Network Connected Devices
88
• Connecting to the PC through network
143
• Executing initial setup
92
• Screen Display
146
• Setting the Time
93
• Media Contents - Additional Functions
157
• Using the Sleep Timer
95
• Using the DLNA Functions
162
• Setting the On / Off Timer
96
• Retuning Channels
17
Basic Features
• Changing the Preset Picture Mode
25
• Adjusting Picture Settings
26
• Changing the Picture Options
35
• Changing the Preset Sound Mode
47
• Adjusting Sound Settings
48
• Selecting the Sound Mode
58
• Locking Programme
100
• Picture In Picture (PIP)
102
• Economical Solutions
104
• Other Features
107
• Support Menu
117
Other Information
• Teletext Feature
168
• Anti-theft Kensington Lock
172
• Troubleshooting
174
• Licence
191
❑❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
NN When you press the a (Information) button, you can see the details of the
programme.
●● Scroll ◄, ► to view information for a desired programme while watching the
current channel.
●● Scroll ▲, ▼ to view information for other channels. If you want to move to the
currently selected channel, press the ENTERE button.
English
▶
❑❑ Using Channel menu
OO MENUm → Support → Contents Home → ENTERE
Press the CONTENT button to select the desired menu. Each screen will be
displayed.
■■ Channel List
◀
You can view channel information, All,
TV, Radio, Data/Other, Analogue or
Favourites 1-5.
▶
NN When you press the CH LIST
button on the remote control,
Channel List screen will be
displayed at once.
Contents Home
Channel List
Guide
AllShare Play
Schedule Manager
Source
R Return
* The displayed image may differ depending on the
model.
English
●●
●●
●●
●●
●●
●●
All: Shows all currently available channels.
TV: Shows all currently available TV channels.
Radio: Shows all currently available radio channels.
Data/Other: Shows all currently available MHP or other channels.
Analogue: Shows all currently available analogue channels.
Favourites 1-5: Shows all favourite channels.
NN If you want to view favourite channels you added, press the CH LIST
button and use L (Ch. Mode) button to move Favourites 1-5.
◀
▶
English
NN Using the control buttons with the Channel List.
●● T (Tools): Displays the option menu.
●● L (Ch. Mode / Channel): Move to the All, TV, Radio, Data/Other,
Analogue or Favourites 1-5.
NN When you select the Programme View in T (Tools) menu, you can
move to other channels using L (Channel) button.
●● E (Watch / Information): Watches the channel you selected. / Displays
details of the selected programme.
◀
●● k (Page): Move to next or previous page.
English
▶
How to use Schedule Viewing in Channel List
(digital channels only)
When you set the Schedule Viewing in Channel List, you can only set the
programme in Programme View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press TOOLS button, and then select the Programme View. The programme list
for that channel appears.
◀
3. Press the ▲ / ▼ buttons to select the desired programme, then press the
ENTERE (Information) or INFO button.
4. Select Schedule Viewing, then press the ENTERE button when done.
NN If you want to cancel Schedule Viewing, follow steps 1 through 3. Select Cancel
schedule.
English
▶
Using Option Menu t
Set each channel using the Channel List menu options (Programme View, Edit
Favourites, Lock/Unlock, Edit Channel Name, Edit Channel Number, Delete,
Information, Sort, Edit Mode).
Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
◀
▶
English
●● Programme View: Displays the programme when digital channel is selected.
●● Edit Favourites: Set channels you watch frequently as favourites. Add or
delete the selected channel in Favourites 1-5.
1. Select the Edit Favourites, then press the ENTERE button.
2. Press the ENTERE button to select Favourites 1-5, then press the OK
button.
NN One favourite channel can be added in several of favourites among
Favourites 1-5.
◀
▶
English
●● Lock/Unlock: Lock a channel so that the channel cannot be selected and
viewed.
NN This function is available only when the Channel Lock is set to On.
NN The PIN input screen appears. Enter your 4-digit PIN. Change the PIN
using the Change PIN option.
●● Edit Channel Name (analogue channels only): Assign your own channel
name.
◀
▶
English
●● Edit Channel Number: Edit the number by pressing the number buttons
desired.
NN Some area may not be able to support Edit Channel Name and Edit
Channel Number function.
●● Delete: You can delete a channel to display the channels you want.
●● Information: Displays details of the selected programme.
●● Sort: Changes the list ordered by channel number or channel name.
◀
▶
English
●● Edit Mode: You can select desired channels and edit it.
Using Option Menu t
Set each channel using the menu options (Edit Favourites, Lock/Unlock,
Delete, Deselect, Select All).
1. Press the TOOLS button in Channel List screen, then select the Edit
Mode. A check box appears to the left of the channel.
2. Press the ▲/▼ buttons to select the desired channel, then press the
ENTERE button. The (c) mark indicates the channel you’ve selected.
◀
NN You can select more than one channel.
NN Press the ENTERE again to deselect the channel.
3. Press the TOOLS button, then select a function and change its settings.
English
▶
●● Edit Favourites: Set the selected channels you watch frequently as
favourites.
NN The Edit Favourites screen has five groups (Favourites 1,
Favourites 2, etc.). You can add a favourite channel to any one of
the groups. Press the ▲/▼ buttons to select a group.
●● Lock/Unlock: Lock a channel so that the channel cannot be selected
and viewed.
NN This function is available only when the Channel Lock is set to On.
◀
NN The PIN input screen appears. Enter your 4-digit PIN. Change the
PIN using the Change PIN option.
●● Delete: You can delete a channel to display the channels you want.
●● Deselect: Deselect the selected channels.
●● Select All: Select all the channels in the channel list.
English
▶
■■ Guide
The EPG (Electronic Programme Guide
Guide) information is provided
Die Musik-Show
by broadcasters. Using
programme schedules provided
by broadcasters, you can
specify programmes you want
to watch in advance so that the
channel automatically changes
to the selected programme
channel at the specified time.
Programme entries may appear
1
2
3
4
5
6 7
blank or out of date depending
on a channel status.
* The displayed image may differ depending on the model.
- In Australia and New Zealand,
if Digital Text is set to Enable,
the EPG (Electronic Programme Guide) will work.
18:30 Sat 1 May
DTV Air 825 NDR FERNSEHEN
19:15 - 20:40
Dani is devastated when scot makes clear his views ...
825 NDR FERNSEHEN
Channel View - All
Today
▲
◀
▼
20:00
821
Kanal 5
No Information
822
M6
No Information
823
MDR FERNSEHEN
824
Mediashopping
825
NDR FERNSEHEN
826
NT1
a Sche. Mgr
English
b -24 Hours
20:30
Musik fur Sie
21:00
MD...
21:30
Ein Schloss am ...
No Information
Die Musik-Show
Die NDR Quizshow
Sportclub live
No Information
{ +24 Hours
} Ch. Mode
`Information
k Page E Schedule
▶
1 a Red (Sche. Mgr): Moves to the reserved programmes in Sche. Mgr.
2 b Green (-24 Hours): Viewing the list of programmes to be broadcasted before
24 hours.
3 { Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24
hours.
4 } Blue (Ch. Mode): Select the type of channels you want to display on the
Channel List window. (All, TV, Radio, Data/Other, Favourites 1-5)
◀
▶
English
5 `(Information): Displays details of the selected programme.
6 k (Page): Move to previous or next page.
7 E (Watch / Schedule)
●● When selecting the current programme, you can watch the selected
programme.
●● When selecting the future programme, you can reserve to watch the selected
programme. To cancel the schedule, press the ENTERE button again and
select Cancel schedule.
◀
▶
English
■■ Schedule Manager
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
Set the current time first to use this function.
Using Option Menu t
Set each channel using the menu options (Cancel schedule, Edit Schedule,
Schedule manually, View Guide).
◀
1. Press the TOOLS button to select the Schedule manually.
NN You can press the a (Schedule manually) directly on the Schedule
Manager screen.
2. Press the ◄/►/▲/▼ or number buttons to set the Antenna, Channel,
Repeat, Date, Start Time.
●● Antenna: Select the desired broadcasting signal.
●● Channel: Select the desired channel.
English
▶
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
NN The (c) mark indicates the day you’ve selected.
●● Date: You can set the desired date.
NN It is available when you select Once in Repeat.
●● Start Time: You can set the start time you want.
NN If you want to edit or cancel the schedule, select the reserved schedule on
◀
the Reserved Programmes. Press the TOOLS button, then select the Edit
Schedule or Cancel schedule.
NN If you select the View Guide, you can see the Guide screen.
English
▶
❑❑ Retuning Channels
■■ Country (Australia / New Zealand / Singapore)
(depending on the country)
OO MENUm → Channel → Country → ENTERE
Select your country so that the TV can correctly auto-tune the broadcasting
channels.
◀
NN The PIN input screen appears. Enter your 4 digit PIN number. The default PIN
number is “0-0-0-0.”
English
▶
■■ Auto Tuning
(depending on the country)
OO MENUm → Channel → Auto Tuning → ENTERE
Scans for a channel automatically and stores in the TV.
NN Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
●● Digital & Analogue / Digital / Analogue: Select the channel source to
◀
memorise.
▶
English
■■ Manual Tuning
OO MENUm → Channel → Manual Tuning → ENTERE
Scans for a channel manually and stores in the TV.
NN If a channel is locked, the PIN input window appears.
NN According to the channel source, Manual Tuning may be supported.
●● Digital Channel Tuning (Channel, Frequency, Bandwidth): Scans for a
◀
digital channel. Press the New button to search the digital channels. When
scanning has finished, channels are updated in the channel list.
NN Bandwidth function is not available at some locations.
English
▶
●● Analogue Channel Tuning: Scans for an analogue channel. Press the New
button to search the channels by adjusting the Programme, Colour System,
Sound System, Channel, Search.
NN Channel mode
–– P (programme mode): When tuning is complete, the broadcasting stations
in your area have been assigned to the position numbers from P0 to P99.
You can select a channel by entering the position number in this mode.
–– C (aerial channel mode) / S (cable channel mode): These two modes allow
◀
you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
English
▶
■■ Guide Type
(Australia only)
OO MENUm → Channel → Guide Type → ENTERE
Selects to use either the built-in or downloaded guide.
●● Guide: Select Native Guide.
●● Auto: Select MHEG Guide but if the channel does not have MHEG Guide,
Native Guide will appear.
◀
▶
English
■■ Transfer Channel List
OO MENUm → Channel → Transfer Channel List → ENTERE
Imports or exports the channel map. You should connect a USB storage to use
this function.
NN The PIN number input screen appears. Enter your 4 digit PIN number.
●● Import from USB: Import channel list from USB.
●● Export to USB: Export channel list to USB.
◀
▶
English
■■ Fine Tune
(analogue channels only)
OO MENUm → Channel → Fine Tune → ENTERE
If the signal is weak or distorted, fine tune the channel manually.
NN Fine tuned channels are marked with an asterisk “*”.
NN To reset the fine-tuning, select Reset.
◀
▶
English
■■ Edit Channel Number (Disable / Enable)
(New Zealand only)
OO MENUm → Channel → Edit Channel Number → ENTERE
Use this to change channel number. When channel number is changed, channel
information is not updated automatically.
◀
▶
English
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When connecting a PC, you can only make changes to the Entertain and
Standard.
◀
●● Dynamic: Suitable for a bright room.
●● Standard: Suitable for a normal environment.
●● Natural for LED 5 series 32" and above, LED 6 series : Suitable for reducing eye
strain.
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
■■ Samsung MagicAngle
for LED 4 series 19", 5 series 22"
OO MENUm → Picture → Samsung MagicAngle → ENTERE
Adjust screen viewing Angle to optimize screen quality according to your viewing
position.
●● Samsung MagicAngle: When viewing the screen at an angle from below or
◀
above by setting the appropriate mode for each position, you can obtain a
similar picture quality as viewing the screen directly from the front.
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower position.
Standing Mode: Select when viewing from the upper position.
●● Mode: Adjust screen viewing angle.
NN When Samsung MagicAngle is set to Lean Back Mode or Standing Mode,
Gamma is not available.
English
▶
■■ Backlight for LED TV / Cell Light for PDP TV / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NN NOTE
●● In analogue TV, AV modes of the PAL system, the Tint (G/R) function is
not available.
●● When connecting a PC, you can only make changes to
◀
Backlight for LED TV / Cell Light
Sharpness.
for PDP TV
, Contrast, Brightness and
●● Settings can be adjusted and stored for each external device connected
to the TV.
●● Lowering picture brightness reduces power consumption.
English
▶
■■ Screen Adjustment
OO MENUm → Picture → Screen Adjustment → ENTERE
Set the various picture options such as picture size and aspect ratio.
●● Picture Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
Auto Wide(New Zealand and Singapore available): Automatically adjusts the
picture size to the 16:9 aspect ratio.
◀
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
NN Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the Zoom or Position by using ▲, ▼ button.
English
▶
4:3: Sets the picture to basic (4:3) mode.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
◀
Smart View 1
by 50%.
for LED 5 series 32" and above, LED 6 series
: Reduces original screen
Smart View 2
by 25%.
for LED 5 series 32" and above, LED 6 series
: Reduces original screen
NN NOTE
●● Smart View 1 is enabled only in HDMI mode.
●● Smart View 2 is enabled only in DTV and HDMI modes.
●● The picture size can vary depending on the input resolution when
content is played using Videos under Media Play.
English
▶
●● Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
●● Zoom/position: Adjust the picture position. It is only available in Zoom.
NN NOTE
●● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Press the ▲ or ▼ button to select Position.
◀
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the picture.
English
▶
●● Depending on the input source, the picture size options may vary.
●● If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
●● The available items may differ depending on the selected mode.
●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
●● Settings can be adjusted and stored for each external device connected
to an input on the TV.
●● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
◀
at the top, bottom, left and right as in the overscan function.
●● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3)
(New Zealand and Singapore available): Available only when picture size is set
to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide
Screen Service) size or the original size. Each country requires different picture
size.
English
▶
●● PC Screen Adjustment
for LED 4 series 19", 5 series 22"
NN It is available in PC mode.
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse)
and Fine-tune again. After the noise has been reduced, readjust the picture so
that it is aligned to the centre of screen.
◀
Position: Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ►
button to adjust the Horizontal-Position.
Image Reset: Resets the image to default settings.
English
▶
■■ Auto Adjustment t
for LED 4 series 19", 5 series 22"
OO MENUm → Picture → Auto Adjustment → ENTERE
Adjust frequency values/positions and fine tune the settings automatically.
NN It is available in PC mode.
NN Not available when connecting with an HDMI/DVI cable.
Using Your TV as a Computer (PC) Display
◀
Setting Up Your PC Software (Based on Windows OS)
Depending on the version of Windows and the video card, the actual screens on
your PC may differ in which case the same basic set-up information will almost
always be applied. (If not, contact your computer manufacturer or Samsung
Dealer.)
English
▶
To set screen resolution, click on the “Control Panel” on the Windows start menu,
and then set the desired screen resolution in the “Display”.
NN NOTE
●● The correct size setting (Screen resolution)
- [Optimum: 1366 X 768 pixels]
- [Optimum: 1920 X 1080 pixels]
for LED 4 series
for LED 5 series
●● If a vertical-frequency option exists on your display settings dialogue box,
◀
the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit
the dialogue box.
English
▶
❑❑ Changing the Picture Options
■■ Advanced Settings
OO MENUm → Picture → Advanced Settings → ENTERE
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
NN When connecting a PC, you can only make changes to Gamma and White
Balance.
for LED 4 series 19", 5 series 22"
◀
▶
English
●● Dynamic Contrast (Off / Low / Medium
Advanced Settings
/ High): Adjust the screen contrast.
Dynamic Contrast
●● Black Tone (Off / Dark / Darker /
Darkest): Select the black level to adjust
the screen depth.
●● Flesh Tone: Adjust the flesh tone colour.
Medium
Black Tone
Off
Flesh Tone
0
RGB Only Mode
Colour Space
Off
Native
White Balance
Gamma
◀
0
yy
●● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue colour for making fine adjustments to the hue and saturation.
English
▶
●● Colour Space (Auto / Native / Custom
for LED 6 series
): Adjust the range of
colours available to create the image.
NN To adjust Colour, Red, Green, Blue and Reset, set Colour Space to
Custom. for LED 6 series
●● White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
◀
Reset: Resets the White Balance to its default settings.
English
▶
●● 10p White Balance (Off / On)
: Controls the white balance in
10 point interval by adjusting the red, green, and blue brightness.
NN Available when the picture mode is set to Movie and when the external
input is set to all input.
NN Some external devices may not support this function.
for LED 6 series
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
◀
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
●● Gamma: Adjust the primary colour intensity.
English
▶
●● Expert Pattern (Off / Pattern1 / Pattern2)
: By running the
Expert Pattern function, the picture can be calibrated without a generator or
filter. If the OSD menu disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern window disappears.
NN While the Expert Pattern is running, sound is not outputted.
for LED 6 series
NN Only enabled on DTV, Component / HDMI mode.
●● xvYCC (Off / On)
◀
: Setting the xvYCC mode on increases detail
and colour space when watching movies from an external device (e.g. DVD
player) connected to the HDMI or Component IN jacks.
NN Available when the picture mode is set to Movie and when the external
input is set to HDMI or Component.
for LED 6 series
English
▶
●● Motion Lighting (Off / On): Reduce power consumption by brightness
control adapted motion.
NN This function is not supported in 3D mode.
NN Only available in Standard mode.
NN When changing a setting value of Backlight
Light
Off.
for PDP TV
for PDP 490 series
/ Cell
, Brightness or Contrast, Motion Lighting will be set to
◀
for LED
▶
English
■■ Picture Options
OO MENUm → Picture → Picture Options → ENTERE
NN When connecting a PC, you can only make changes to the Colour Tone.
●● Colour Tone (Cool / Standard / Warm1 / Warm2)
NN Warm1 or Warm2 will be deactivated when the picture mode is
◀
Dynamic.
NN Settings can be adjusted and stored for each external device connected
to an input on the TV.
English
▶
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation):
If the broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that may appear
on the screen.
NN When the signal is weak, try other options until the best picture is
displayed.
Auto Visualisation: When changing analogue channels, displays signal
strength.
◀
NN Only available for analogue channels.
NN When the INFO button is pressed, the signal strength bar is displayed.
NN When bar is green, you are receiving the best possible signal.
English
▶
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG
noise to provide improved picture quality.
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to
adjust the screen depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and
◀
process film signals from all sources and adjust the picture for optimum
quality.
NN Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (1080i).
NN If the screen does not seem natural, change its option to Off / Auto1 /
Auto2 in Film Mode.
English
▶
●● Motion Plus (Off / Clear / Standard / Smooth / Custom /
◀
Demo) for LED 6 series : Removes drag from fast scenes with a lot of movement
to provide a clearer picture.
NN The Info screen on your TV displays the resolution and frequency of the
incoming signal (60Hz), but not the frequency the TV is generating for the
image it is displaying by using Motion Plus function.
NN If noise occurs on the screen, please set up the Motion Plus to Off. If
Motion Plus is Custom, you can set up the Blur Reduction, Judder
Reduction or Reset manually.
NN If Motion Plus is Demo, you can compare the difference of on and off
modes.
English
▶
Blur Reduction: Adjusts the blur reduction level from video sources.
Judder Reduction: Adjusts the judder reduction level from video sources
when playing films.
Reset: Reset the custom settings.
●● LED Motion Plus (Off / On)
: Removes drag from fast scenes
with a lot of movement to provide a clear picture.
NN It will be deactivated when the picture mode is set to Natural.
for LED 5, 6 series
◀
▶
English
■■ Reset Picture (Yes / No)
OO MENUm → Picture → Reset Picture → ENTERE
Resets your current picture mode to its default settings.
◀
▶
English
❑❑ Changing the Preset Sound Mode
■■ Sound Mode t
OO MENUm → Sound → Sound Mode → ENTERE
◀
●●
●●
●●
●●
●●
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
for LED, PDP TV
English
▶
❑❑ Adjusting Sound Settings
■■ Sound Effect
(standard sound mode only)
OO MENUm → Sound → Sound Effect → ENTERE
Use the up and down arrow keys to select an option, and then press ENTERE.
●● SRS TruSurround HD (Off / On) t
(standard sound mode only)
◀
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
English
▶
●● SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialogue can be heard more clearly.
●● Equaliser
Use Equaliser to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
◀
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equaliser to its default settings.
NN If Speaker Select is set to External Speaker, Sound Effect is disabled.
for LED, PDP TV
English
▶
■■ Broadcast Audio Options
OO MENUm → Sound → Broadcast Audio Options → ENTERE
●● Audio Language t
(digital channels only)
Change the default value for audio languages.
NN The available language may differ depending on the broadcast.
●● Audio Format
◀
(digital channels only)
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV Speaker
function.
NN Audio Format option may differ depending on the broadcast. 5.1ch
Dolby digital sound is only available when connecting an external speaker
through an optical cable. LCD 420 does not support
English
▶
●● Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
NN Audio Description (Off / On): Turn the audio description function on or
off.
NN Volume: Adjust the audio description volume.
◀
▶
English
■■ Additional Settings
OO MENUm → Sound → Additional Settings → ENTERE
●● DTV Audio Level (MPEG / HE-AAC) (digital channels only): This function
◀
allows you to reduce the disparity of a voice signal (which is one of the signals
received during a digital TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
NN To increase or decrease the volume, adjust between the range 0 and -10
respectively.
English
▶
●● SPDIF Output
: SPDIF (Sony Philips Digital InterFace) is used
to provide digital sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Audio Format: You can select the Digital Audio output (SPDIF) format. The
available Digital Audio output (SPDIF) format may differ depending on the
input source.
for LED, PDP TV
NN By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your
◀
interactive 3D sound experience.
Audio Delay: Correct audio-video sync problems, when watching TV or
video, and when listening to digital audio output using an external device such
as an AV receiver (0ms ~ 250ms).
English
▶
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity
between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
◀
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
English
▶
■■ Speaker Settings
OO MENUm → Sound → Speaker Settings → ENTERE
●● Speaker Select (External Speaker / TV Speaker)
for LED, PDP TV
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NN When Speaker Select is set to External Speaker, the volume and
◀
MUTE buttons will not operate and the sound settings will be limited.
NN When Speaker Select is set to External Speaker.
●● TV Speaker: Off, External Speaker: On
NN When Speaker Select is set to TV Speaker.
●● TV Speaker: On, External Speaker: On
NN If there is no video signal, both speakers will be mute.
English
▶
●● Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN To use the volume control on the source device connected to the TV,
set Auto Volume to Off on the TV. Otherwise, a change to the volume
control of the source device may not be applied.
◀
▶
English
■■ Reset Sound (Yes / No)
OO MENUm → Sound → Reset Sound → ENTERE
Reset all sound settings to the factory defaults.
◀
▶
English
❑❑ Selecting the Sound Mode t
When you set to Dual I-II, the current sound mode is displayed on the screen.
A2 Stereo
NICAM Stereo
◀
Audio Type
Dual I-II
Default
Mono
Mono
Automatic change
Stereo
Stereo ↔ Mono
Dual
Dual I ↔ Dual II
Dual I
Mono
Mono
Automatic change
Stereo
Mono ↔ Stereo
Dual
Mono → Dual I
 Dual II 
Dual I
NN If the stereo signal is weak and an automatic switching, occurs, then switch
to the mono.
NN Only activated in stereo sound signal.
NN Only available when the Source is set to TV.
English
▶
❑❑ Connecting to the Network
for PDP 490 series, 450, 530 series(except Singapore) and LED 4, 5, 6 series(except Singapore)
■■ Wired Network Connection
for PDP 490 series
You can attach your TV to your LAN using cable in three ways:
◀
▶
English
●● You can attach your TV to your LAN by connecting the LAN port on the back
of your TV to an external modem using a LAN cable. See the diagram below.
* The position of port may differ depending
on the model.
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
◀
▶
Modem Cable
LAN Cable
English
●● You can attach your TV to your LAN by connecting the LAN port on the back
of your TV to a IP Sharer which is connected to an external modem. Use LAN
cable for the connection. See the diagram below.
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
◀
Modem Cable
IP Sharer
(having DHCP server)
LAN Cable
English
LAN Cable
▶
●● Depending on how your network is configured, you may be able to attach
your TV to your LAN by connecting the LAN port on the back of your TV
directly to a network wall outlet using a LAN cable. See the diagram below.
Note that the wall outlet is attached to a modem or router elsewhere in your
house.
TV Rear Panel
The LAN Port on the Wall
◀
▶
LAN Cable
English
●● If your network requires a Dynamic IP address, you should use an ADSL
◀
modem or router that supports Dynamic Host Configuration Protocol (DHCP).
Modems and routers that support DHCP automatically provide the IP
address, subnet mask, gateway, and DNS values your TV needs to access
the Internet so you do not have to enter them manually. Most home networks
use a Dynamic IP address. Some networks require a Static IP address. If your
network requires a Static IP address, you must enter the IP address, subnet
mask, gateway, and DNS values manually on your TV’s Cable Setup Screen
when you set up the network connection. To get the IP address, subnet
mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your
computer.
NN You can use ADSL modems that support DHCP if your network requires
a Static IP address. ADSL modems that support DHCP also let you use
Static IP addresses.
NN It is not supported when the network speed is below or equal to 10Mbps.
English
▶
■■ Wireless Network Connection
for PDP 490 series, 450, 530 series(except Singapore) and LED 4, 5, 6 series(except Singapore)
To connect your TV to your network wireless, you need a wireless router or
modem and a Samsung Wireless LAN Adapter (WIS12ABGNX, WIS09ABGNX),
which you connect to your TV’s back or side panel USB port. See the illustration
below.
◀
Wireless IP sharer
(Wireless router having DHCP
Server)
Samsung Wireless LAN
Adapter
▶
The LAN Port on the Wall
TV Side Panel
LAN Cable
English
Samsung’s Wireless LAN adapter is sold separately and is offered by select
retailers and Ecommerce sites. Samsung’s Wireless LAN adapter supports the
IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. When you play video over a network connection, the video may
not be played smoothly.
NN NOTE
●● You must use the “Samsung Wireless LAN Adapter” (WIS12ABGNX,
WIS09ABGNX) to use a wireless network.
◀
●● Samsung Wireless LAN Adapter and the USB extension Cable are sold
separately and are offered by select retailers and Ecommerce sites.
English
▶
●● To use a wireless network, your TV must be connected to a wireless IP
sharer (either a router or a modem). If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the
wireless network.
●● Select a channel for the wireless IP sharer that is not currently being used.
If the channel set for the wireless IP sharer is currently being used by
another device nearby, this will result in interference and communication
failure.
◀
●● If you apply a security system other than the systems listed below, it will
not work with the TV.
English
▶
●● If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected
and the Encryption type is set to WEP or TKIP for your wireless router,
Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can
connect to the network via PBC (Push Button Configuration) or PIN
(Personal Identification Number). WPS will automatically configure the
SSID and WPA key in either mode.
◀
▶
English
●● If your router, modem, or device is not certified, it may not connect to the
TV via the “Samsung Wireless LAN Adapter”.
●● Ensure the TV is turned off before you connect the Samsung Wireless
LAN Adapter.
●● Connection Methods: You can setup the wireless network connection like
below.
◀
––
––
––
––
Auto Setup (Using the Auto Network Search function)
Manual Setup
WPS(PBC)
Wi-Fi Direct
▶
for PDP 490
●● The Samsung Wireless LAN Adapter may not be recognized when using
a connection via a USB hub or via a USB extension cable other than the
cable supplied.
English
Notice
The picture may appear corrupted or have static for some channels when the TV
is connected to the Samsung Wireless LAN Adapter. In such a case, establish
a connection using one of the following methods or connect the Samsung
Wireless LAN Adapter using a USB cable in a place that is not affected by radio
interference.
Method 1
◀
Connect using the USB right angle adapter. To
connect the Samsung Wireless LAN Adapter using
the USB right angle adapter, follow these steps:
1. Connect the USB right angle adapter to the
Samsung Wireless LAN Adapter.
2. Connect the other end of the right angle
adapter to the USB port.
English
▶
* The position of port may differ
depending on the model.
Method 2
Connect via an extension cable
To reconnect the Samsung Wireless LAN Adapter
using the extension cable, follow these steps:
or
1. Connect the extension cable to the USB port.
2. Connect the extension cable and Samsung
Wireless LAN Adapter.
◀
* The position of port may differ
depending on the model.
3. Attach the Samsung Wireless LAN Adapter to
the back of the TV near the top, using doublesided adhesive tape.
NN The Samsung Wireless LAN Adapter should be installed in an
interference-free area in order to avoid interference between the adapter
and tuner.
English
▶
■■ Network Settings
OO MENUm → Network → Network Settings → ENTERE
You can set the wired or wireless network connection.
NN For detailed settings for wired network, refer to the "Setting the Wired
Network", and for detailed settings for wireless network, refer to the "Setting
the Wireless Network" in this manual.
◀
▶
English
■■ Network Status
OO MENUm → Network → Network Status → ENTERE
You can check the current network and Internet status.
◀
▶
English
The check list for wired network connection failure
When wired network connection failed, try to apply the following information to
each issue.
Issues
No network cable found.
Solutions and Explanations
• Check that your network cable is plugged in.
• Samsung Wireless LAN adapter is required to use a wireless network.
• If it is connected, make sure that the router is turned on; if it is on, try
turning it off and on again.
IP auto setting failed.
◀
Try the following to set your IP address automatically or set your IP
address manually by selecting IP Settings.
• Ensure DHCP server is enabled on router and unplug and re-plug-in
the router.
• Contact your Internet Service Provider for more information.
English
▶
Issues
Unable to connect to the
network.
Connected to your local
network, but cannot
connect to the Internet.
Solutions and Explanations
• Check if your IP address is set correctly in IP Settings.
• Contact your Internet Service Provider for more information.
• Check your Internet LAN cable is connected correctly to LAN port of
router.
• Check the DNS settings in IP Settings.
• If the problem persists, contact your Internet Service Provider to
access the Internet.
◀
Network setup complete, • Log in Internet service network.
but cannot connect to the
• If the problem persists, contact your Internet Service Provider to
Internet.
access the Internet.
English
▶
The check list for wireless network connection failure
When wireless network connection failed, try to apply the following information to
each issue.
Issues
Solutions and Explanations
Wireless network
connection failed.
• No wireless router selected. Go to Network Settings to select your
router.
Unable to connect to
wireless router.
• Check that the router is turned on, and if it is on, try turning it off and on
again.
• Check if you need to enter a security key to use the router.
◀
IP auto setting failed.
• Try the following to set your IP address automatically or set your IP
address manually by selecting IP Settings.
• Ensure DHCP server is enabled on router and unplug and re-plug-in the
router.
• Check if you need to enter a security key to use the router.
• Contact your Internet Service Provider for more information.
English
▶
Issues
Unable to connect to the
network.
Solutions and Explanations
• Check if your IP address is set correctly in IP Settings.
• Check if you need to enter a security key to use the router.
• Contact your Internet Service Provider for more information.
Connected to your local
network, but cannot
connect to the Internet.
• Check your Internet LAN cable is connected correctly to LAN port of
router.
• Check the DNS settings in IP Settings.
• If the problem persists, contact your Internet Service Provider to
access the Internet.
◀
Network setup complete, • Log in Internet service network.
but cannot connect to the
• If the problem persists, contact your Internet Service Provider to
Internet.
access the Internet.
English
▶
❑❑ Setting the Wired Network
for PDP 490 series
■■ Wired Network Setup (Auto)
NN When connecting the LAN Cable, the screen pop-up appears directly to set
wired network.
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
◀
▶
English
How to set up automatically
1. Go to Network Settings screen.
2. Select Start.
Network Settings
Network cable connected.
Press Start to configure your wired network settings.
3. The network connection screen
appears, and network setting is
done.
Start
Cancel
If you want to connect to your wireless network, plug in
a Samsung Wireless LAN Adapter.
◀
▶
NN If it fails to set automatically, check the connection of LAN port.
NN If you cannot find network connection values or if you want to set connection
manually, set it to Manual. Refer to following “How to set up manually”.
English
■■ Wired Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialogue that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to
IP Settings
set up automatically” procedure.
IP Mode
Manual
2. Select the IP Settings on network
connection screen.
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
3. Set IP Mode to Manual.
◀
4. Press the ▼ button to go to the first entry
field.
DNS Mode
Manual
DNS Server
0.0.0.0
▶
OK
U Move
E Enter
R Return
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons to enter numbers and the arrow buttons to move from
one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
English
❑❑ Setting the Wireless Network
for PDP 490 series, 450, 530 series(except Singapore) and LED 4, 5, 6 series(except Singapore)
■■ Wireless Network Setup (Auto)
◀
Most wireless networks have an optional security system that requires devices
that access the network to transmit an encrypted security code called an Access
or Security Key. The Security Key is based on a Pass Phrase, typically a word or a
series of letters and numbers of a specified length you were asked to enter when
you set up wireless security for your wireless network. If you use this method of
setting up the network connection, and have a Security Key for your wireless
network, you will have to enter the Pass Phrase during the setup process.
NN When connecting Samsung Wireless LAN Adapter, the screen pop-up
appears directly to set wireless network.
English
▶
How to set up automatically
1. Go to Network Settings screen.
2. Select Start.
3. The Network function searches
for available wireless networks.
When done, it displays a list of the
available networks.
◀
Network Settings
Samsung Wireless LAN Adapter connected.
Press Start to configure your wireless network settings.
Start
Cancel
If you want to connect to your wired network, plug in a
network cable.
* The displayed image may differ depending on the
model.
4. In the list of networks, press the ▲ or ▼ button to select a network, and then
press ENTERE button.
NN If the wireless router is set to Hidden (Invisible), you have to select Add
Network and enter the correct network name and Security key to
establish the connection.
English
▶
5. If the Security screen pop-up appears, go to step 6. If you select the wireless
router which does not have wireless security, go to step 7.
6. To set wireless security for the router, enter the Security key(Security or PIN).
NN When you enter the Security key (Security or PIN), use ▲/▼/◄ /►
buttons to select number/characters. Press ENTERE to enter the
characters.
NN You should be able to find the Pass Phrase on one of the set up screens
you used to set up your router or modem.
◀
7. The network connection screen appears, and network setting is done.
NN If it fails to set Security key (Security or PIN), select Retry or IP Settings.
NN If you want to set connection manually, select the IP Settings. Refer to
following “How to set up manually”.
English
▶
■■ Wireless Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialogue that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 7 in the “How to set up automatically” procedure.
2. Select the IP Settings on network connection screen.
3. Set IP Mode to Manual.
4. Press the ▼ button to go to the first entry field.
◀
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons to enter numbers and the arrow buttons to move from
one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
English
▶
■■ Wireless Network Setup (WPS(PBC))
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Settings screen.
2. Select Start.
3. The Network function searches for available wireless networks. When done, it
displays a list of the available networks.
4. Select the WPS(PBC).
◀
5. Press the WPS(PBC) button on your router within 2 minutes. Your TV
automatically acquires all the network setting values it needs and connects to
your network.
6. The network connection screen appears, and network setting is done.
English
▶
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently
registered the MAC address (a unique identifying number) of your PC or modem, which
it then authenticates each time you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC address, your ISP can not
authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices
other than a PC (such as your TV) to the Internet.
◀
If your Internet service provider requires an ID or password to connect to the Internet,
your TV may not be able to connect to the Internet. If this is the case, you must enter your
ID or password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your
Internet service provider, please contact Samsung Electronics.
English
▶
❑❑ Managing the Network Connected Devices
for PDP 490 series
■■ Wi-Fi Direct
OO MENUm → Network → Wi-Fi Direct → ENTERE
Set to connect the TV to wireless mobile devices. Using this function, you can
connect wireless mobile devices with your TV directly without a wireless router.
NN You can use this function when connecting the Samsung Wireless LAN
Adapter.
◀
NN It only supports AllShare Play function.
NN It may not be supported depending on the mobile device.
English
▶
How to connect the device to your TV using Wi-Fi Direct function
1. Go to Wi-Fi Direct screen. The TV starts to search devices.
2. Turn on the Wi-Fi Direct function on your device. Select the desired device,
and then press the ENTERE button.
●● PBC: Press the WPS(PBC) button on your device within 2 minutes. Your
TV automatically acquires all the network setting values it needs and
connects to your network.
●● PIN: Input the displayed PIN on your device.
◀
NN If you want to disconnect the device, select the connected device, and press ▶
the ENTERE button to select Disconnect.
English
■■ AllShare Settings
OO MENUm → Network → AllShare Settings → ENTERE
Set whether to allow a network connected device like a smartphone or tablet
to share content or control TV using an application downloaded on your mobile
device. For details on set up options, refer to the "Using the DLNA Functions".
◀
▶
English
■■ Device Name
OO MENUm → Network → Device Name → ENTERE
Change the TV’s name by keying in a name manually.
NN A keyboard appears on the screen and you can key in a name for your TV
manually using your remote control. For example, if you want to change the
name to Samsung TV, press each character using the ▲/▼/◄/► buttons,
and then select Done.
◀
▶
English
❑❑ Executing initial setup
■■ Setup
OO MENUm → System → Setup → ENTERE
Configure the channels and the time when setting up the TV for the first time or
when resetting the unit.
NN For the detailed information about setting Setup, refer to “Initial Setup” in
User Manual.
◀
▶
English
❑❑ Setting the Time
■■ Time
OO MENUm → System → Time → ENTERE
The current time will appear every time you press the INFO button.
●● Clock: Setting the clock is for using various timer features of the TV.
NN If you disconnect the power cord, you have to set the clock again.
◀
Clock Mode: Set up the current time manually or automatically.
–– Auto: Set the current time automatically using the time from a digital
channel.
NN The antenna must be connected in order to set the time automatically.
English
▶
–– Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
Clock Set: Set the Date and Time.
NN Available only when Clock Mode is set to Manual.
NN You can set the Date and Time directly by pressing the number buttons
on the remote control.
Time Zone (Australia only): Select your time zone.
◀
NN This function is only available when the Clock Mode is set to Auto.
English
▶
❑❑ Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes).
NN To cancel Sleep Timer, select Off.
◀
▶
English
❑❑ Setting the On / Off Timer
OO MENUm → System → Time → On Timer <or> Off Timer → ENTERE
●● On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can
be made. You must set the clock first.
–– Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up
the day you want to activate the timer.
◀
NN The c mark indicates the day you’ve selected.
–– Time: Set the hour and minute.
–– Volume: Set the desired volume level.
English
▶
–– Source: Select TV or USB content to be played when the TV is turned on
automatically. (USB can be selected only when a USB device is connected
to the TV)
–– Aerial (when the Source is set to TV): Select ATV or DTV.
–– Channel (when the Source is set to TV): Select the desired channel.
–– Music / Photo (when the Source is set to USB): Select a folder in the
USB device containing music or photo files to be played when the TV is
turned on automatically.
◀
NN NOTE
●● If there is no music file on the USB device or the folder containing
a music file is not selected, the timer function does not operate
correctly.
English
▶
●● When there is only one photo file in the USB device, the slide
show will not play.
●● If a folder name is too long, the folder cannot be selected.
●● Each USB you use is assigned its own folder. When using
more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
●● It is recommended that you use a USB memory stick and a multi
card reader when using On Timer.
◀
●● The On Timer function may not work with USB devices with
a built-in battery, MP3 players, or PMPs made by some
manufacturers because these devices take a long time to be
recognized.
English
▶
●● Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can
be made. You must set the clock first.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up the
day you want to activate the timer.
NN The c mark indicates the day you’ve selected.
Time: Set the hour and minute.
◀
▶
English
❑❑ Locking Programme
■■ Security
OO MENUm → System → Security → ENTERE
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.
●● Channel Lock (Off / On): Lock channels in Channel menu to prevent
◀
unauthorized users, such as children, from watching unsuitable programme.
NN Available only when the Source is set to TV.
English
▶
●● Program Rating Lock (depending on the country): Prevent unauthorized
users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the “\” symbol will
be displayed.
Allow All: Unlock all TV ratings.
–– The items of Program Rating Lock differs depending on the country.
●● Change PIN: Change your password required to set up the TV.
◀
▶
English
❑❑ Picture In Picture (PIP)
■■ PIP t
OO MENUm → System → PIP → ENTERE
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
NN NOTE
◀
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
▶
●● PIP settings
◀
●●
●●
●●
●●
●●
Main picture
Sub picture
Component, HDMI
TV
PIP (Off / On): Activate or deactivate the PIP function.
Channel: Select the channel for the sub-screen.
Size (Õ / Ã): Select a size for the sub-picture.
Position (à / – / — / œ): Select a position for the sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main /
Sub) in PIP mode.
English
▶
❑❑ Economical Solutions
■■ Eco Solution
OO MENUm → System → Eco Solution → ENTERE
●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This
adjusts the brightness of the TV in order to reduce power consumption. If you
select Picture Off, the screen is turned off, but the sound remains on. Press
any button except volume button to turn on the screen.
◀
▶
English
●● Eco Sensor (Off / On)
: To
enhance your power savings; the picture settings will automatically adapt to
the light in the room.
NN If you adjust the Backlight for LED TV / Cell Light for PDP TV , the Eco
Sensor will be set to Off.
Min. Backlight for LED TV / Min Cell Light for PDP TV : When Eco Sensor is
On, the minimum screen brightness can be adjusted manually.
for LED 5 series 32" and above, LED 6 series, PDP TV
NN If Eco Sensor is On, the display brightness may change (become slightly
◀
darker or brighter) depending on the surrounding light intensity.
English
▶
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary
energy consumption, set how long you want the TV to remain on if it’s not
receiving a signal.
NN Disabled when the PC is in power saving mode.
●● Auto Power Off (Off / On): The TV will be automatically turned off when no
user operation is received for 4 hours.
◀
▶
English
❑❑ Other Features
■■ Language
OO MENUm → System → Language → ENTERE
●● Teletext Language: Set a desired language for teletext.
NN English is the default in cases where the selected language is unavailable
in the broadcast.
◀
●● Preferred Language (Primary audio / Secondary audio / Primary subtitle
/ Secondary subtitle / Primary teletext / Secondary teletext): Select a
language, which will be the default language when a channel is selected.
NN Primary teletext and Secondary teletext may not be supported in
some locations.
English
▶
■■ Subtitle
OO MENUm → System → Subtitle → ENTERE
Use this menu to set the Subtitle mode.
●● Subtitle (Off / On): Switches subtitles on or off.
●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode.
●● Subtitle Language: Sets the subtitle language.
NN If the programme you are watching does not support the Hearing
◀
Impaired function, Normal automatically activates even if the Hearing
Impaired mode is selected.
NN English is the default in cases where the selected language is unavailable
in the broadcast.
English
▶
■■ Digital Text (Disable / Enable)
(Australia & New Zealand only)
OO MENUm → System → Digital Text → ENTERE
If the programme broadcasts with digital text, this feature is enabled.
◀
▶
English
■■ Auto Protection Time
for LED TV
OO MENUm → System → Auto Protection Time → ENTERE
●● Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the
screen remains idle with a still image for a certain period of time defined by the
user, the screen saver is activated to prevent the formation of ghost images
on the screen.
◀
▶
English
■■ Screen Burn Protection
for PDP TV
OO MENUm → System → Screen Burn Protection → ENTERE
To reduce the possibility of screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to programme the time
between movement of the picture in minutes.
●● Pixel Shift (Off / On): Using this function, you can minutely move pixels
◀
on the PDP in horizontal or vertical direction to minimize after image on the
screen.
NN Optimum condition for pixel shift
Item
TV / HDMI
Horizontal
0~4
4
Vertical
0~4
4
Time (minute)
1~4 min
4 min
English
▶
NN The Pixel Shift value may differ depending on the monitor size (inches)
and mode.
NN This function is not available in the Screen Fit mode.
●● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen
remains idle with a still image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of ghost images on the
screen.
●● Scrolling: This function removes after-images on the screen by moving all
◀
the pixels on the PDP according to a pattern. Use this function when there
are remaining after images or symbols on the screen, especially when you
displayed a still image on the screen for a long time.
English
▶
NN The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen.
If the after-image is not removed after performing the function, repeat the
function again.
NN Press any key on the remote control to cancel this feature.
●● Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3,
the screen is prevented from any damage by adjusting the white balance on
both extreme left and right sides.
◀
▶
English
■■ General
OO MENUm → System → General → ENTERE
●● Game Mode (Off / On): When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
NN NOTE
●● Precautions and limitations for game mode
◀
–– To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
–– If you display the TV menu in Game Mode, the screen shakes
slightly.
English
▶
●● Game Mode is not available in TV mode.
●● After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
●● If Game Mode is On:
–– Picture Mode is set to Standard and Sound Mode is set to
Movie.
●● Panel Lock (Off / On): Lock or unlock all the keys on the TV.
●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on.
◀
▶
English
■■ DivX® Video On Demand
OO MENUm → System → DivX® Video On Demand → ENTERE
Shows the registration code authorized for the TV. If you connect to the DivX
web site and register with 10-digit registration code, you can download the VOD
activation file.
Once you play it using Videos, the registration is completed.
NN For more information on DivX® VOD, visit http://vod.divx.com.
◀
▶
English
❑❑ Support Menu
■■ e-Manual
OO MENUm → Support → e-Manual → ENTERE
You can read the introduction and instructions about the TV features stored in
your TV.
NN For the detailed information about e-Manual Screen, refer to “How to use the
e-Manual” in User Manual.
◀
▶
English
■■ Self Diagnosis
OO MENUm → Support → Self Diagnosis → ENTERE
NN Self Diagnosis might take few seconds, this is part of the normal operation
of the TV.
●● Picture Test (Yes / No): Use to check for picture problems.
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound
◀
problems.
NN If you hear no sound from the TV’s speakers, before performing the
sound test, make sure Speaker Select is set to TV Speaker in the
Sound menu. for LED, PDP TV
NN The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
for LED, PDP TV
English
▶
●● Signal Information: (digital channels only) HDTV channel’s reception quality is
either perfect or the channels are unavailable. Adjust your antenna to increase
signal strength.
●● Reset: Reset all settings to the factory defaults except network settings.
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.
●● Troubleshooting: If the TV seems to have a problem, refer to this description.
NN If none of these troubleshooting tips apply, contact the Samsung
◀
customer service centre.
▶
English
■■ Software Upgrade
OO MENUm → Support → Software Upgrade → ENTERE
Software Upgrade can be performed by downloading the latest firmware from
“www.samsung.com” to a USB memory device.
Current Version-the software already installed in the TV.
Installing the Latest Version
●● By USB: Insert a USB drive containing the firmware upgrade file, downloaded
◀
from “www.samsung.com” into the TV. Please be careful not to disconnect the
power or remove the USB drive until upgrades are complete. The TV will be
turned off and on automatically after completing the firmware upgrade. When
software is upgraded, video and audio settings you have made will return to
their default settings. We advise you to write down your settings so that you
can easily reset them after the upgrade.
English
▶
●● By Online
for PDP 490 series
: Upgrade the software using the Internet.
NN First, configure your network. For detailed procedures on using the
Network Setup, refer to the “Network Settings” instructions.
NN If the internet connection doesn’t operate properly, the connection may
be broken. Please retry downloading. If the problem persists, download
by USB and upgrade.
◀
▶
English
●● By Channel: Upgrade the software using the broadcasting signal.
NN If the function is selected during the software transmission period,
software will be automatically searched and downloaded.
NN The time required to download the software is determined by the signal
status.
●● Alternative Software: Replace the current software with the alternative.
●● Standby Mode Upgrade (Off / 1 hour later / 2 hours later / 00:00 / 02:00 /
◀
12:00 / 14:00): A manual upgrade will be automatically performed at selected
time. Since the power of the unit is turned on internally, the screen may be
turned on slightly for the product. This phenomenon may continue for more
than 1 hour until the software upgrade is complete.
English
▶
■■ Contact Samsung
OO MENUm → Support → Contact Samsung → ENTERE
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and
how to download products and software.
◀
▶
English
■■ Contents Home
OO MENUm → Support → Contents Home → ENTERE
You can enjoy useful and various contents.
◀
▶
English
❑❑ Using the 3D function
for PDP 490 series
■■ 3D
OO MENUm → Picture → 3D → ENTERE
This exciting new feature enables you to view 3D content. To fully enjoy this
feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D
video. Samsung 3D Active Glasses are sold separately. For more detailed
purchasing information, contact the retailer where you purchased this TV.
◀
NN "Full HD 3D Glasses™" Logo indicates compatibility between display
products and 3D Glasses which are compliant with the "Full HD 3D
Glasses™" format, and does not indicate picture quality of display products.
English
▶
Viewing TV using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV’s 3D
function.
[[ WARNING
●● Some viewers may experience discomfort while viewing 3D TV such as
dizziness, nausea and headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and rest.
◀
●● Watching 3D images for an extended period of time may cause eye
strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active
Glasses and rest.
English
▶
●● A responsible adult should frequently check on children who are using the
3D function. If there are any reports of tired eyes, headaches, dizziness,
or nausea, have the child stop viewing 3D TV and rest.
●● Do not use the 3D Active Glasses for other purposes (such as general
eyeglasses, sunglasses, protective goggles, etc.)
●● Do not use the 3D function or 3D Active Glasses while walking or moving
around. Using the 3D function or 3D Active Glasses while moving around
may result in injuries due to running into objects, tripping, and/or falling.
◀
▶
English
●● 3D Mode: Select the 3D input format.
NN If you want to feel the 3D effect fully, please wear the 3D Active Glasses
first, and then select 3D Mode from the list below that provides the best
3D viewing experience.
NN When watching 3D images, turn on 3D Active Glasses.
3D Mode
Off
◀
Operation
Off
Turns the 3D function off.
2D → 3D
Changes a 2D image to 3D.
Side by Side
Displays two images next to each other.
Top & Bottom
Displays one image above another.
English
▶
NN Some file format may not be supported the "2D → 3D".
NN When you watch 3D images under flickering lighting such as a fluorescent
lamp (50Hz ~ 60Hz ) or a 3 wavelength lamp, you may notice some
screen flickering. If this occurs, dim or turn off the light.
●● 3D Perspective (-5 ~ +5): Adjust overall 3D perspective of on-screen image.
●● Depth (0~10): Adjust overall depth.
●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
◀
▶
English
Support resolution (16:9 only)
●● HDMI
Source
/
◀
Frame Packing
Resolution
Frequency (Hz)
1280 X 720p
50 / 59.94 / 60 Hz
1920 X 1080i
50 / 59.94 / 60 Hz
1920 X 1080p
23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz
1280 X 720p
50 / 59.94 / 60 Hz
1920 X 1080i
50 / 59.94 / 60 Hz
1920 X 1080p
23.98 / 24 / 25 / 29.97 / 30 Hz
English
▶
●● Component & DTV
Source
Component
DTV
◀
Resolution
Frequency (Hz)
1280 X 720p
50 / 59.94 / 60 Hz
1920 X 1080i
50 / 59.94 / 60 Hz
1920 X 1080p
23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz
1280 X 720p
50 / 59.94 / 60 Hz
1920 X 1080i
50 / 59.94 / 60 Hz
1920 X 1080p
25 Hz
●● Videos / Photos (In AllShare Play)
Refer to "Supported Subtitle and AllShare Play file formats" in the Other
Information section.
English
▶
How to watch the 3D image
●● Method 1
NN Some 3D modes may not be available depending on the format of the
image source.
NN To watch in 3D, wear 3D Active Glasses and press the power button on
the glasses.
1. Press the MENU button use the ▲ or ▼ button to select Picture, and
then press the ENTERE button.
◀
2. Use the ▲ or ▼ button to select 3D, and then press the ENTERE
button.
3. Use the ▲ or ▼ button to select 3D Mode, and then press the
ENTERE button.
4. Using the ◄ or ► buttons select the 3D Mode of the image you want to
view.
English
▶
●● Method 2
1. Press the W button. and then you can view the 3D image.
2. If you want to change 3D options (such as 3D Perspective), press the
MENU button and then select Picture.
3. Go to Step 3 in the “Method 1”, and follow the directions from that point
on.
NN To exit the 3D mode, press the W button on your remote again.
◀
▶
English
Before using 3D function...
NN NOTE
●● 3D Mode is set to Off automatically when you access AllShare Play or
e-Manual functions.
●● 3D Mode is set to memorised configuration value automatically, when
changing the input source.
◀
●● Some Picture functions are disabled in 3D mode.
●● PIP is not supported in 3D mode.
●● 3D Active Glasses from Samsung’s previous product (IR type) or other
manufacturers not be supported.
●● When the TV is initially powered on, may take some time until the 3D
display is optimized.
English
▶
●● The 3D Active Glasses may not work properly if there is any other 3D
product or electronic devices turned on near the glasses or TV. If there is
a problem, keep other electronic devices as far away as possible from the
3D Active Glasses.
●● Be sure to stay within the viewing angle and optimum TV viewing distance
when watching 3D pictures.
●● Otherwise, you may not be able to enjoy proper 3D effects.
●● The ideal viewing distance should be three times or more the height of
◀
the screen. We recommend sitting with viewer’s eyes on a level with the
screen.
English
▶
❑❑ Using the Media Contents
Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC)
device.
1. Press the CONTENT button to select Media Play / AllShare Play
Play Only for PDP 490 series .
2. Press ▲/▼ button to select desired menu (Videos, Photos, Music), then
press the ENTERE button.
◀
3. Press ▲/▼ button to select desired device, then press the ENTERE button
again.
English
▶
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and movie files to the USB
port on the side of the TV.
3. When USB is connected to the TV, popup window appears. You can select
the Videos, Photos or Music directly.
◀
NN It might not work properly with unlicenced multimedia files.
NN Need-to-Know List before using Media Contents
●● MTP (Media Transfer Protocol) is not supported.
●● The file system supports FAT16, FAT32 and NTFS.
●● Certain types of USB Digital camera and audio devices may not be
compatible with this TV.
English
▶
●● Media Contents only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples
of MSC are Thumb drives, Flash Card Readers(USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
●● Before connecting your device to the TV, please back up your files to
prevent them from damage or loss of data. SAMSUNG is not responsible
for any data file damage or data loss.
◀
●● The HDD (Hard Disk Drive) connected to USB is not supported.
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to display on
the screen.
●● The maximum supported JPEG resolution is 15360 x 8640 pixels.
English
▶
●● For unsupported or corrupted files, the “Not Supported File Format”
message is displayed.
●● MP3 files with DRM that have been downloaded from a non-free site
cannot be played. Digital Rights Management (DRM) is a technology that
supports the creation, distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights
and interests of the content providers, the prevention of the illegal copying
of contents, as well as managing billings and settlements.
◀
●● A USB device that requires high power (more than 500mA or 5V) may not
be supported.
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be
released automatically when connected to the TV.
English
▶
●● If a USB extension cable is used, the USB device may not be recognized
or the files on the device may not be read.
●● If a USB device connected to the TV is not recognized, the list of files on
the device is corrupted or a file in the list is not played, connect the USB
device to the PC, format the device and check the connection.
●● If a file deleted from the PC is still found when Media Contents is run, use
the “Empty the Recycle Bin” function on the PC to permanently delete the
file.
◀
●● Media Contents only supports sequential jpeg format.
●● The scene search and thumbnail functions are not supported in the
Videos.
●● If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
▶
Disconnecting a USB Device
●● Method 1: Using the SOURCE button.
1. Press the SOURCE button.
2. Select a desired USB device, and then press the TOOLS button. The
Tools menu appears.
3. Select Safely Remove USB Device, and then wait until the selected
USB device is disconnected. You can remove a USB device from the
TV.
◀
▶
English
●● Method 2: Using the Media Play / AllShare Play
Only for 490 series
home
Screen.
1. Go to Media Play / AllShare Play
Only for 490 series
home Screen.
2. Select any category, and then press the ENTERE button.
3. Select a desired USB device, and then press the TOOLS button. The
Tools menu appears.
◀
4. Select Safely Remove USB Device, and then wait until selected
USB device is disconnected. You can remove a USB device from the
TV.
NN To remove a USB device from the TV, we recommend use Safely
Remove USB Device function.
English
▶
❑❑ Connecting to the PC through network
for PDP 490 series
You can play pictures, music and videos saved on your PC through a network
connection in the AllShare Play mode over your TV.
NN If you want to use AllShare Play to play files saved on your PC over your TV,
you should download “AllShare PC Software” and users manual from “www.
samsung.com”.
1. For more information on how to configure your network, refer to ‘Network
Connection’.
◀
–– You are recommended to locate both TV and PC in same subnet. The
first 3 parts of the IP address of the TV and PC should be the same and
only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
English
▶
2. Using a LAN cable, connect between the external modem and the PC onto
which the AllShare PC Software programme will be installed.
–– You can connect the TV to the PC directly without connecting it through a
Sharer (Router).
NN Functions that are not supported when connecting to a PC through a
network:
●● The Background Music On and Background Music Setting functions.
●● The � (REW) or µ (FF) button while a movie is playing.
◀
NN The DivX DRM, Multi-audio, embedded caption does not supported.
▶
NN AllShare PC Software should be permitted by the firewall programme on your
PC.
English
NN When you use AllShare Play mode through a network connection, according
to functions of the provided server:
●● The sorting method may vary.
●● The � (REW), µ (FF) or � (Pause) buttons may not work depending
on the content information.
NN If you experience any file stuttering issue while playing a video over a wireless
network, we recommend using a wired network.
◀
▶
English
❑❑ Screen Display
Move to the desired file using the ◄/►/▲/▼ buttons and then press the
ENTERE or � (Play) button. The file is played. The screen may differ
depending on the way to enter the screen.
* The displayed image may differ depending on the
model.
◀
Information:
You can ascertain the
selected device name,
contents mode, folder/
file name, page.
Media Play / Videos /
SUM / 500 Days of... .avi
1/15
Information:
You can ascertain
the name, size and
created date of the
selected file.
πµ Page Move E Play T Tools R Return
File List Section:
You can confirm the
files and groups that are
sorted by category.
Operation Buttons:
- E Play: Plays the selected file.
- T Tools: Displays the option menu.
- R Return: Move to the previous step.
- πµ/b{ Page Move: Move to up or down page.
English
▶
■■ Videos
Playing Video
1. Press the ◄/►/▲/▼ button to select the desired video in the file list.
2. Press the ENTERE button or � (Play) button.
–– The selected file name is displayed on the top with its playing time.
–– If video time information is unknown, play time and progress bar are not
displayed.
◀
–– During video playback, you can search using ◄ and ► button.
–– You can use (�) (REW) and (µ) (FF) buttons during playback.
NN In this mode, you can enjoy movie clips contained on a Game, but you
cannot play the Game itself.
English
▶
●● Supported Subtitle Formats
–– External
◀
Name
File extension
MPEG-4 timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or .txt
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
Powerdivx
.psb
▶
–– Internal
Name
Container
Format
Xsub
AVI
Picture Format
SubStation Alpha
MKV
Text Format
Advanced SubStation Alpha
MKV
Text Format
SubRip
MKV
Text Format
MPEG-4 Timed text
MP4
Text Format
English
●● Supported Video Formats
File
Extention
◀
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.m2ts
*.mts
*.divx
Container
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Audio
Codec
30
AC3
LPCM
ADMPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG
(MP3)
DTS Core
DivX 3.11/4.x/5.x/6.1
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
MPEG4 SP/ASP
1920 x 1080
H.264 BP/MP/HP
Motion JPEG
640 x 480
6~30
8
Window Media Video v9
MPEG2
1920 x 1080
MPEG1
English
30
▶
Other Restrictions
●● Video content will not play, or not play correctly, if there is an error in the
content or the container.
●● Sound or video may not work if the contents have a standard bit rate/frame
rate above the compatible Frame/sec listed in the table above.
●● If the Index Table is in error, the Seek (Jump) function is not supported.
●● When playing the video through network, it may not work depending on the
◀
network status. When you play video over a network connection, the video
may not be played smoothly. for PDP 490 series
●● Some USB/digital camera devices may not be compatible with the player.
●● The menu can be displayed late if the video is over 10Mbps(bit rate).
English
▶
Video decoder
Audio decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4
and AVCHD are not supported.
• GMC is not supported.
◀
• WMA supports up to 10 Pro 5.1 channel and
M2 profile. (LBR mode of M0 is not supported)
• WMA lossless audio is not supported.
▶
English
■■ Photos
Viewing a Photo (or Slide Show)
1. Press the ◄/►/▲/▼ button to select the desired photo in the file list.
2. Press the ENTERE button.
NN During the slide show, all files in the file list will be displayed in order.
NN When you press the � (Play) button in the file list, slide show will be
◀
started immediately.
NN During the slide show, you can adjust the slide show speed using π
(REW) or µ (FF) button.
NN You can move to other file using ◄ or ► button.
NN Music files can be automatically played during the slide show if the
Background Music On is set.
English
▶
●● Supported Photo Formats
File Extension
Type
Resolution
*.jpg
JPEG
15360 X 8640
*.bmp
BMP
1920 X 1080
*.mpo
MPO
15360 X 8640
◀
▶
English
■■ Music
Playing Music
1. Press the ◄/►/▲/▼ button to select the desired Music in the file list.
2. Press the ENTERE button or � (Play) button.
–– You can use � (REW) and µ (FF) buttons during playback.
NN Only displays the files with supported music file extension. Other file
extensions are not displayed, even if they are saved on the same USB device.
◀
NN If the sound is abnormal when playing music files, adjust the Equaliser in the ▶
Sound menu. (An over-modulated music file may cause a sound problem.)
English
NN Using the playback menu
–– Press the ◄/► button to select the desired menu.
●● Play / Pause: You can start or stop a music. Alternatively, the ∂ or
∑ button on the remote.
●● Repeat Mode (Off / One Song / All): You can play music files
repeatedly.
●● Shuffle Mode (Off / On): You can play the music randomly.
●● Sound Mode (Standard / Music / Movie / Clear Voice / Amplify):
◀
You can adjust the sound setting.
English
▶
●● Supported Sound Formats
◀
File Extension
Type
Codec
*.mp3
MPEG
MPEG1 Audio Layer 3
*.m4a
*.mpa
*.aac
*.3ga
MPEG4
AAC
*.flac
FLAC
FLAC
●● Seek is not supported. Supports up to
2ch.
*.ogg
OGG
Vorbis
●● Supports up to 2ch.
*.wma
WMA
WMA
●● WMA supports up to 10 Pro 5.1 channel
and M2 profile. (LBR mode of M0 is not
supported)
English
Remark
▶
❑❑ Media Contents - Additional Functions
Playing the selected Videos/Music/Photos files
1. Press the TOOLS button at each main screen and select Play selection.
2. Select the desired files.
NN The check box appears to the left of the selected files.
◀
3. Press the ► button to select Play.
NN You can select or deselect all files pressing the Select All / Deselect All.
English
▶
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category
Operation
Videos
Title Search
You can move the other file directly.
c
Time Search
You can search the video using ◄ and
► button at one minute interval or
entering the number directly.
c
Photos
Music
NN It may not be supported
depending on the input source.
◀
Repeat Mode
You can play movie files repeatedly.
c
Picture Size
You can adjust the picture size to your
preference.
c
Picture Mode
You can adjust the picture setting.
c
English
▶
c
Category
Operation
Videos
Photos
c
Sound Mode
You can adjust the sound setting.
c
Audio Language
You can change the audio language if
the video has more than one language.
c
Subtitle
You can set subtitles on/off.
c
Subtitle Settings
You can play the video with subtitles.
This function only works if the subtitles
are the same file name as the video.
c
◀
Music
▶
English
Category
◀
Operation
Videos
Photos
Start Slide Show /
Stop Slide Show
You can start or stop a slide show.
c
Slide Show Speed
You can select the slide show speed
during the slide show.
c
Background Music
On / Background
Music Off
You can set on/off background music
when watching a slide show.
c
Background Music
Setting
You can select background music
when watching a slide show.
c
Zoom
You can zoom into images in full
screen mode.
c
Rotate
You can rotate images in full screen
mode.
c
English
Music
▶
Category
Operation
Videos
Photos
Music
Edit playlist
You can edit the play list when playing
the desired music.
c
Play selection
Select and play multiple files.
c
Information
You can see detailed information about
the played file.
◀
c
c
c
▶
English
❑❑ Using the DLNA Functions
for PDP 490 series
You can play media contents including videos, photos and music saved on your
mobile phones or the other devices (such as your PC) by controlling them on the
TV via the network.
NN First, configure your network. For detailed procedures on using the Network
Setup, refer to the “Network Settings” instructions.
NN For more information, visit “www.samsung.com” or contact the Samsung call
◀
centre. Mobile devices may need additional software installation. For details,
refer to each device’s user’s guide.
NN If your Samsung TV connects to a non-Samsung DLNA server, a compatibility
issue may occur during video playback.
English
▶
NN By connecting your Samsung TV to a network via AllShare™, you can use
Samsung’s original functions as follows:
◀
––
––
––
––
––
––
––
––
Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.)
Video thumbnail feature
Bookmark function (to resume video playback)
Auto-chaptering (scene navigation)
Digital content management
Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)
▶
Search with file names
And many others
NN To use the original DLNA functions of Samsung fully, it is recommended that
you use the AllShare™ software provided with your TV.
English
Playing the media contents saved on the devices
1. Connect the mobile phone or other devices which support AllShare Play
function, and then play the media contents of each device. The popup screen
appears on the bottom of your TV.
2. Select the Allow to accept the connected devices. The media contents of the
devices can be playing on your TV.
NN You can find the allowed devices on the AllShare Settings.
◀
▶
English
Using the AllShare Play function, play the media contents of the devices
connected to DLNA function.
1. Press the CONTENT button to select AllShare Play.
2. Press ▲/▼ button to select desired menu (Videos, Photos, Music), then
press the ENTERE button.
3. When the DLNA device is selected, press the ENTERE button again.
4. Press the ◄/►/▲/▼ button to select the desired file.
◀
5. Press the ENTERE button.
▶
English
NN NOTE
●● Contents may not be played on your TV depending on their resolution
and format.
●● The ENTERE and ◄/► buttons may not work depending on the type
of media content.
●● Using the mobile device, you can control the media playing. For details,
refer to each mobile’s user’s guide.
◀
▶
English
Using the AllShare Settings function
OO MENUm → Network → AllShare Settings → ENTERE
Shows a list of mobile phones or connected devices which have been set up with
this TV for using the AllShare Settings function.
NN The AllShare Settings function is available in all devices which support DLNA
DMC.
◀
●● Allow / Deny: Allows/Blocks the devices.
●● Delete: Deletes the devices from the list.
NN This function only deletes the name of the devices from the list. If the
deleted device is turned on or tries to connect to the TV, it may appear
on the list again.
English
▶
❑❑ Teletext Feature
The index page of the Teletext service gives you information on how to use the
service. For Teletext information to be displayed correctly, channel reception must
be stable. Otherwise, information may be missing or some pages may not be
displayed.
You can change Teletext pages by pressing the numeric buttons on the remote
control.
●● 0 (mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST
◀
mode, switches the mode to List save mode. In List save mode, you can save
a Teletext page into a list using the 8(store) button.
●● / (Teletext on/mix/off): Activates the Teletext mode for the current
channel. Press the button twice to overlap the Teletext mode with the current
broadcasting screen. Press it one more time to exit teletext.
English
▶
●● 1 (sub-page): Displays the available sub-page.
●● 8 (store): Stores the Teletext pages.
●● 6 (index): Displays the index (contents) page at any time while you are
viewing Teletext.
●● 4 (size): Displays the teletext on the upper half of the screen in double-size.
To move the text to the lower half of the screen, press it again. For normal
display, press it once again.
●● 9 (hold): Holds the display at the current page, in the case that there are
◀
several secondary pages that follow automaticially. To undo, press it again.
●● 2 (page up): Displays the next Teletext page.
●● 3 (page down): Displays the previous Teletext page.
English
▶
●● 5 (reveal): Displays the hidden text (answers to quiz games, for example). To
display the normal screen, press it again.
●● 7 (cancel): Shrinks the Teletext display to overlap with the current broadcast.
●● Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by
the broadcasting company, the different topics on a Teletext page are colourcoded and can be selected by pressing the coloured buttons. Press the
colour corresponding to the topic of your choice. A new colourcoded page is
displayed. Items can be selected in the same way. To display the previous or
next page, press the corresponding coloured button.
◀
▶
English
The Teletext pages are organized according to six categories:
Part
◀
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information. FASTEXT information.
A
B
C
D
E
F
English
▶
❑❑ Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking
method may differ from the illustration depending on the manufacturer. Refer
to the manual provided with the Kensington Lock for additional information on
proper use.
NN Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K”
icon.
◀
NN The position and colour may differ depending on the model.
▶
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around
a large, stationary object such as desk
or chair.
TV Rear
Optional
English
2. Slide the end of the cable with the lock attached through the looped end of
the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
NN These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
NN The locking device has to be purchased separately.
◀
▶
English
❑❑ Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these
troubleshooting tips apply, please visit “www.samsung.com”, then click on
Support.
Issues
Picture Quality
Solutions and Explanations
First of all, please perform the Picture Test and confirm that your TV is
properly displaying test image. (go to MENU - Support - Self Diagnosis Picture Test) If the test image is properly displayed, the poor picture may
caused by the source or signal.
◀
▶
English
Issues
The TV image does not
look as good as it did in
the store.
Solutions and Explanations
●● If you have an analogue cable/set top box, upgrade to a digital set top
box. Use HDMI or Component cables to deliver HD (high definition)
picture quality.
●● Cable/Satellite subscribers: Try HD stations from the channel line up.
●● Antenna connection: Try HD stations after performing Auto tuning.
●● Many HD channels are up scaled from SD (Standard Definition)
contents.
●● Adjust the Cable/Set top box video output resolution to 1080i or 720p.
◀
●● Make sure you are watching the TV at the minimum recommended
distance based on the size and definition of the signal.
English
▶
Issues
Solutions and Explanations
The picture is distorted:
macroblock error, small
block, dots, pixelization
●● Compression of video contents may cause picture distortion especially
in fast moving pictures such as sports and action movies.
●● Low signal level or bad quality can cause picture distortion. This is not a
TV issue.
●● Mobile phones used close to the TV (cca up to 1m) may cause noise in
picture on analogue and digital TV.
Colour is wrong or
missing.
◀
●● If you’re using a component connection, make sure the component
cables are connected to the correct jacks. Incorrect or loose
connections may cause colour problems or a blank screen.
English
▶
Issues
There is poor colour or
brightness.
Solutions and Explanations
●● Adjust the Picture options in the TV menu. (go to Picture Mode /
Colour / Brightness / Sharpness)
●● Adjust Energy Saving option in the TV menu. (go to MENU - System Eco Solution - Energy Saving)
●● Try resetting the picture to view the default picture settings. (go to
MENU - Picture - Reset Picture)
There is a dotted line on ●● If the picture size is set to Screen Fit, change it to 16:9.
the edge of the screen. ●● Change cable/satellite box resolution.
◀
The picture is black and
white.
●● If you are using an AV composite input, connect the video cable (yellow)
to the Green jack of component input 1 on the TV.
English
▶
Issues
Solutions and Explanations
When changing
●● If connected with a cable box, please try to reset the cable box.
channels, the picture
Reconnect the AC cord and wait until the cable box reboots. It may
freezes or is distorted or
take up to 20 minutes.
delayed.
●● Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio
is properly operating. (go to MENU - Support - Self Diagnosis - Sound
Test)
If the audio is OK, the sound problem may caused by the source or signal.
◀
There is no sound or
the sound is too low at
maximum volume.
●● Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray
etc) connected to your TV.
English
▶
Issues
The picture is good but
there is no sound.
Solutions and Explanations
●● Set the Speaker Select option to TV Speaker in the sound menu.
for LED, PDP TV
●● If you are using an external device, make sure the audio cables are
connected to the correct audio input jacks on the TV.
●● If you are using an external device, check the device’s audio output
option (ex. you may need to change your cable box’s audio option to
HDMI when you have a HDMI connected to your TV).
●● If you are using a DVI to HDMI cable, a separate audio cable is required.
◀
●● Reboot the connected device by reconnecting the device’s power
cable.
●● If your TV has a headphone jack, make sure there is nothing plugged
into it.
English
▶
Issues
Solutions and Explanations
The speakers are
●● Check the cable connections. Make sure a video cable is not
making an inappropriate
connected to an audio input.
noise.
●● For antenna or cable connections, check the signal strength. Low signal
level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
●● Make sure the AC power cord is securely plugged in to the wall outlet
and the TV.
●● Make sure the wall outlet is working.
◀
●● Try pressing the POWER button on the TV to make sure the problem is
not the remote. If the TV turns on, refer to “The remote control does not
work” below.
English
▶
Issues
The TV turns off
automatically.
Solutions and Explanations
●● Ensure the Sleep Timer is set to Off in the Time menu.
●● If your PC is connected to the TV, check your PC power settings.
●● Make sure the AC power cord is plugged in securely to the wall outlet
and the TV.
●● When watching TV from an antenna or cable connection, the TV will
turn off after 10 ~ 15 minutes if there is no signal.
◀
▶
English
Issues
There is no picture/
video.
Solutions and Explanations
●● Check cable connections (remove and reconnect all cables connected
to the TV and external devices).
●● Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video
outputs to match the connections to the TV input. For example, if an
external device’s output is HDMI, it should be connected to an HDMI
input on the TV.
●● Make sure your connected devices are powered on.
◀
●● Be sure to select the TV’s correct source by pressing the SOURCE
button on the remote control.
●● Reboot the connected device by reconnecting the device’s power
cable.
English
▶
Issues
Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not receiving
all channels.
●● Make sure the Antenna cable is connected securely.
●● Please try Setup (Initial setup) to add available channels to the channel
list. Go to MENU - System - Setup (Initial setup) and wait for all
available channels to be stored.
●● Verify the Antenna is positioned correctly.
◀
The picture is distorted:
macro block error small
block, dots, pixelization
●● Compression of video contents may cause picture distortion, especially
on fast moving pictures such as sports and action movies.
●● A low signal can cause picture distortion. This is not a TV issue.
English
▶
Issues
Solutions and Explanations
Network Connection
for PDP 490 series, 450, 530 series(except Singapore) and LED 4, 5, 6 series(except Singapore)
The wireless network
connection failed.
●● Samsung Wireless USB dongle is required to use a wireless network.
●● Make sure the Network Connection is set to Wireless.
●● Make sure the TV is connected to a wireless IP sharer (Router).
Software Upgrade
over the network
fails. for PDP 490 series
◀
●● Try Network Settings in Network menu.
●● If you have latest SW version, SW upgrade will not proceed.
Others
The picture will not display ●● HD channels will have black bars on either side of the screen when
in full screen.
displaying up scaled SD (4:3) contents.
●● Black bars on the top and bottom will appear during movies that have
aspect ratios different from your TV.
●● Adjust the picture size options on your external device or TV to full
screen.
English
▶
Issues
Plasma TV is
making humming
noise. for PDP TV
Solutions and Explanations
●● Plasma TVs typically make a soft humming sound. This is normal. It’s
caused by the electrical charges that are used to create the images on
the screen.
●● If the humming sound is loud, you may have set the brightness on the
TV too high. Try setting the brightness lower.
●● You can also have loud humming if the back of your Plasma TV is too
close to a wall or other hard surface. Also try rerouting your connection
cables.
◀
●● Improper installation of wall mount can create excessive noise.
Image Retention (Burn
In) Issue. for PDP TV
●● To minimize the possibility of screen burn, this unit is equipped with
Pixel Shift screen burn reduction technology. Pixel Shift lets you set the
picture so it moves slightly up and down (Vertical Line) and side to side
(Horizontal Dot). The regular, slight movement of the picture reduces
screen burn in.
English
▶
Issues
Solutions and Explanations
The remote control does ●● Replace the remote control batteries with the poles (+/–) in the right
not work.
direction.
●● Clean the sensor’s transmission window on the remote.
●● Try pointing the remote directly at the TV from 5~6 feet away.
◀
The cable/set top box
remote control doesn’t
turn the TV on or off, or
adjust the volume.
●● Programme the Cable/Set top box remote control to operate the TV.
Refer to the Cable/Set user manual for the SAMSUNG TV code.
A “Mode Not
Supported” message
appears.
●● Check the supported resolution of the TV, and adjust the external
device’s output resolution accordingly.
English
▶
Issues
Solutions and Explanations
There is a plastic smell
from the TV.
●● This smell is normal and will dissipate over time.
The TV Signal
Information is
unavailable in the Self
Diagnosis Test menu.
●● This function is only available with digital channels from an Antenna / RF
/ Coax connection.
TV is tilted to the right or ●● Remove the stand base from the TV and reassemble it.
left side.
◀
There are difficulties
assembling the stand
base.
●● Make sure the TV is placed on a flat surface. If you can not remove the
screws from the TV, please use a magnetized screw driver.
English
▶
Issues
The Channel menu is
grey out (unavailable).
Solutions and Explanations
●● The Channel menu is only available when the TV source is selected.
Your settings are lost
●● If the TV is in the Store Demo mode, it will reset audio and picture
after 30 minutes or every
settings every 30 minutes. Change the settings from Store Demo
time the TV is turned off.
mode to Home Use mode in the Setup (Initial setup) procedure. Press
the SOURCE button to select TV mode, and go to MENU → System
→ Setup (Initial setup) → ENTERE.
You have intermittent
loss of audio or video.
◀
●● Check the cable connections and reconnect them.
●● Loss of audio or video can be caused by using overly rigid or thick
cables. Make sure the cables are flexible enough for long term use.
If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
English
▶
Issues
Solutions and Explanations
You see small particles
●● This is part of the product’s design and is not a defect.
when you look closely at
the edge of the frame of
the TV.
The PIP menu is not
available.
●● PIP functionality is only available when you are using a HDMI or
components source.
You turned the TV off
45 minutes ago, and it
turned on again.
●● It is normal. The TV operates the OTA (Over The Aerial) function itself to
upgrade firmware downloaded whilst your watching TV.
◀
▶
English
Issues
◀
Solutions and Explanations
There are recurrent
picture/sound issues.
●● Check and change the signal/source.
A reaction may occur
between the rubber
cushion pads on the
base stand and the top
finish of some furniture.
●● To prevent this, use felt pads on any surface of the TV that comes in
direct contact with furniture.
The message “This file
may not be playable
properly.” appears.
●● This may appear because of high bit rate of content. Content generally
will play but could experience some playability issue.
▶
English
❑❑ Licence
TheaterSound, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in
speakers, while maintaining steady volume and delivering rich bass and clear dialog.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
◀
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS,
Inc. All Rights Reserved.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0
Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
Only for LCD 420 series
English
▶
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of
Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.
com for more information and software tools to convert your files into DivX videos.
◀
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order
to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code,
locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration. Covered by one or more of the following
U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
English