Always there to help you
Register your product and get support at
www.philips.com/welcome
CED780/12
Question?
Contact
Philips
EN User manual
1
IT Manuale utente
79
DE Benutzerhandbuch
27
NL Gebruiksaanwijzing
105
FR Mode d’emploi
53
Contents
1Important
5
Safety5
Notice5
2 Your in-car entertainment system
6
Introduction6
What's in the box
6
Overview of the main unit
7
Overview of the remote control
8
3 Get started
Install the car audio
Mount into the dashboard
Attach the front panel
Install remote control battery
Turn on
Set date and time
4 Play audio/video/picture
9
9
10
11
11
12
12
12
Load discs
12
Connect USB device
13
Insert SD card
13
Remove the SD card.Play/Pause
13
Browse14
Select audio track
14
Select subtitle language
14
Change view angle
14
Repeat one/all chapter
14
Random play
14
Select audio mode
14
View photo
14
5 Listen to radio
15
6 Play with RDS
16
Tune to a radio station
Store radio stations in memory
Tune to a preset station
Turn on RDS
15
15
15
16
Select program type
RDS program types
Activate AF/TA functions
16
16
16
7 Use navigation system
17
8 Play with Bluetooth device
17
9 Play iPod
19
10 Adjust sound
20
11 Adjust settings
21
12Others
23
Insert map card
Use map
17
17
Pair the Bluetooth-enabled devices
Make a call
Receive call
Bluetooth phone book settings
Favorite call
Adjust Bluetooth settings
Listen to music from Bluetooth device
Compatible iPod/iPhone
Listen to the iPod/iPhone
Search for a track
Charge the iPod/iPhone
17
18
18
19
19
19
19
19
20
20
20
Adjust volume
20
Mute20
Select preset equalizer
20
Adjust fader/balance/subwoofer
20
Switch music listening zone
21
Turn FullSound on/off
21
Turn MAX sound on/off
21
Turn DBB on/off
21
Display system setup menu
Adjust general settings
View Info settings
Adjust Navigation settings
Adjust Bluetooth settings
21
22
22
22
22
Adjust brightness
23
EN
3
Set rear view camera
23
23
Adjust display design
Listen to other devices
23
Detach the front panel
23
Reset24
Replace fuse
24
13 Product information
24
14Troubleshooting
25
Playability information
About the Bluetooth device
4
EN
25
26
1Important
Safety
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Read and understand all instructions before you use
the device. If damage is caused by failure to follow
instructions, the warranty does not apply.
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
The device is designed for negative ground (earth) 12 V
DC operation only.
To reduce the risk of traffic accidents, do not watch
video when driving.
To ensure safe driving, adjust the volume to a safe and
comfortable level.
Improper fuses can cause damage or fire. When you
need to change the fuse, consult a professional.
Use only the supplied mounting hardware for a safe
and secure installation.
To avoid short circuits, do not expose the device, remote
control or remote control batteries to rain or water.
The device shall not be exposed to dripping or splashing.
Do not place any sources of danger on the device (e.g.
liquid filled objects, lighted candles).
Never insert objects into the ventilation slots or other
openings on the device.
Never place any objects other than discs into the disc tray/slot.
To avoid exposure to laser radiation, do not
disassemble the device.
Risk of damage to the screen! Never touch, push, rub
or strike the screen with any object.
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended for discs.
Clean the device with soft, damp cloth. Never use
substances such as alcohol, chemicals or household
cleaners on the device.
Notice
This item
incorporates copy
protection
technology that is
protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Philips is under license.
Windows Media and the Windows logo
are trademarks, or registered trademarks
of Microsoft Corporation in the United
States and/or other countries.
“Made for iPod” and
“Made for iPhone”
mean that an electronic
accessory has been
designed to connect specifically to iPod or iPhone
respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc., registered in
the U.S. and other countries.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit divx.com for
more information and software tools to convert your files
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to
complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of
Rovi Corporation or its subsidiaries and are used under license.
Manufactured under license from
Dolby Laboratories.
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are those of their
respective owners.
This apparatus includes this label:
Environmental information
All unnecessary packaging has been omitted. We have tried
to make the packaging easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Recycling
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
EN
5
When you see the crossed-out wheel bin symbol attached to
a product, it means the product is covered by the European
Directive 2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about the
local rules on the separate collection of electrical
and electronic products. The correct disposal of
your old product helps prevent potentially negative
consequences on the environment and human health.
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed of with
normal household waste.
Please inform yourself about the local rules on separate
collection of batteries. The correct disposal of batteries
helps prevent potentially negative consequences on the
environment and human health.
This product complies with the
radio interference requirements
of the European Community.
1177
Disposal of your old product and
batteries
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
Never dispose of your product with other household waste.
Please inform yourself about the local rules on the separate
collection of electrical and electronic products and batteries.
The correct disposal of these products helps prevent
potentially negative consequences on the environment and
human health.
Your product contains batteries, which cannot be disposed of
with normal household waste.
Please inform yourself about the local rules on separate
collection of batteries. The correct disposal of batteries
helps prevent potentially negative consequences on the
environment and human health.
Please visit www.recycle.philips.com for additional information
on a recycling center in your area.
Any changes or modifications made to this device that are
not expressly approved by Philips Consumer Lifestyle may
void the user’s authority to operate the equipment.
2011 © Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics
N.V. or their respective owners. Philips reserves the right to
change products at any time without being obliged to adjust
earlier supplies accordingly.
2 Your in-car
entertainment system
Congratulations on your purchase, and welcome to Philips! To
fully benefit from the support that Philips offers, register your
product at www.philips.com/welcome.
Introduction
With the car entertainment system, you can
• Quickly found routine through the navigation system
And you can also enjoy:
• Audio/video/JPEG pictures from
• DVD, VCD or CD
• USB devices
• SD/SDHC cards
• iPod/iPhone
• External devices
• FM or AM (MW) radio
• Audio from Bluetooth-enabled devices
Besides, you can make/receive phone calls with Bluetoothenabled devices.
What's in the box
Check and identify the contents of your package:
a
b
c
d
e
f
g
h
i
j
a
b
c
d
e
f
g
Main unit and front panel (with a sleeve)
Remote control
Trim plate
Carrying case for front panel
Audio and Video cable
Hexagon head screw
Screws
- M4x8mm (x4)
h Remote control battery
i Rubber cushion
j User manual
6
EN
Overview of the main unit
ab c d
e
f
g
h
i
j
k
o
n
m
l
q
a OPEN
• Open/Close TFT screen.
b
• Press to answer a call.
• Press and hold to transfer call.
c
/
• Turn the unit on or off.
• Confirm selection.
• Mute or unmute sound.
• Rotate to adjust volume.
d BAND
• Select tuner band.
e +/-PRESET
• Select preset radio station.
• Search for track/folder.
f DISP
p
•
•
Adjust dimmer settings.
Press and hold to turn off TFT display.
g
TILT
• Adjust position of the screen.
h
• Eject disc.
i NAVI
• Enter GPS navigation system.
j AV IN
• External audio/video socket.
k
• Unlock the panel.
l
• USB socket.
m SOURCE
• Select source.
EN
7
n
•
•
Press to terminate call.
o
/
• Tune for radio station.
• Skip/search for track.
• Fast backward/forward playback.
p RESET
• Reset the unit when it hangs up.
q SD/SDHC card slot
h
Overview of the remote control
a
b
c
d
e
~
}
|
f
g
h
i
{
z
y
j
k
x
l
w
v
u
m
n
t
o
s
p
r
q
a
• Turn the unit on or off.
b NAVI
• Enter GPS navigation system.
c SOURCE
• Select source.
d
• Mute or unmute sound.
e BAND
• Select tuner band.
f VOLUME +/• Adjust volume.
g SUBTITLE
8
EN
Select DVD or DivX subtitle language.
• Turn maximizing sound on or off.
i DVD MENU
• Access DVD main menu.
j
• Turn full sound on or off.
k
• Return to previous menu or exit.
l DBB
• Turn Dynamic Bass Boost (DBB) sound on or off.
m EQ
• Access audio setting menu.
n
• View the clock.
o ZONE
• Switch music listening zone.
p
• Select video channel.
q
• Answer phone.
• Dial or redial number.
r
• Terminate call.
s
• Browse photos.
t
• Switch to music playing mode.
u
/
• Skip to previous/next preset station.
• Skip to previous/next folder.
• Search backward/forward for DVD video.
• Move cursor up/down.
v
• Start play or pause.
w OK
• Confirm selection.
x
/
• Skip to previous/next track/chapter.
• Move cursor to left/right.
y
• Turn TFT on or off.
z DVD AUDIO
• Select audio language or audio channel.
{ TOP MENU
• Return to top menu.
| TILT +/• Adjust position of the screen.
}
• Unlock the panel.
~DISP
• Adjust dimmer settings.
• Press and hold to turn off TFT display.
3 Get started
1
Check the car's wiring carefully, then connect them to
the ISO wires.
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Install the car audio
These instructions are for a typical installation. However, if
your car has different requirements, make the corresponding
adjustment. If you have any questions regarding installation
kits, consult your Philips car audio dealer.
Caution
Connector
Connect to
1
Yellow wire
The +12V car battery which is live at
all times.
2
Blue/White
wire
The electric antenna control lead or
power supply lead of the antenna
booster. If there is no electric antenna
or antenna booster, or it is manually
operated telescopic antenna, it is
unnecessary to connect this lead.
3
Black wire
A metal surface of the car. Connect
the black ground (earth) lead before
connect the yellow and red power
supply leads.
4
Red wire
The +12V power terminal which is live
in the accessory (ACC) position of the
ignition switch. If there is no accessory
position, connect to the +12V car
battery terminal that is always live.
Ensure that black ground (earth) lead
is connected to a metal surface of the
car first.
5
Green and
green/black
wires
Left speaker (Rear)
6
White and
white/black
wires
Left speaker (Front)
7
Gray and gray/
black wires
Right speaker (Front)
8
Purple and
purple/black
wires
Right speaker (Rear)
•• This unit is designed for negative ground (earth) 12 V
DC operation only.
•• Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
•• To avoid short-circuit: before you connect, ensure that
the ignition is off.
•• Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
•• Ensure that all loose leads are insulated with electrical tape.
•• Ensure that the leads do not get caught under screws
or in moving parts (e.g. seat rail).
•• Ensure that all ground (earth) leads are connected to a
common ground (earth) point.
•• Use only the supplied mounting hardware for a safe
and secure installation.
•• Improper fuses can cause damage or fire. When you
need to change the fuse, consult a professional.
Note on the power supply lead (yellow)
When you connect other devices to this system, ensure
that the rating of the car circuit is higher than the total
fuse value of all the connected devices.
Notes on speaker connection
• Never connect speaker wires to the metal body or
chassis of the car.
• Never connect speaker wires with stripes to one another.
•
Connect wires
Caution
2
Connect the other end of the standard connector to
the car audio system.
•• Ensure that all loose leads are insulated with electrical
tape.
EN
9
Caution
•• To avoid any accident, the driver must not watch video
while driving.This unit is designed to not allow watching
moving video while driving. Park your car in a safe place and
engage the parking brake before watching moving video.
Note
•• The video blocking system under parking brake not
engaged only control the display of this unit, and will
not affect the video output through the rear RCA
video output.
•• If watch moving video from disc or AV-IN source but
parking brake is not properly connected, the video
signal will be blocked by the system, and the below
display will be shown on TFT:
22
Connector/Object
Connect to/with
1
Pink wire
Extension wire
2
Extension wire (not
included)
Parking brake (-)
3
Brake switch
4
Ground
5
Purple wire
6
Gearbox switch
7
Reverse gear signal
Black lamp lead +
8
ISO wires
Connected in step 1 above
9
Yellow cable
Video out
10
Red cable
Rear line out (Right)
11
White cable
Rear line out (Left)
12
Red cable
Front line out (Right)
13
White cable
Front line out (Left)
14
Red cable
Audio in (Right)
15
White cable
Audio in (Left)
16
Yellow cable
Video in
17
Brown cable
Camera in
18
Blue cable
Subwoofer
19
White wire
OE remote
20
Black wire
Radio antenna
21
Black wire
External microphone
22
Black wire
GPS smart antenna
Reverse camera (B+)
Mount into the dashboard
21
20
Note
•• Check wire connection before you mount the unit
into a car.
•• If preset radio stations are lost when the ignition key is
turned off and then turned on, reconnect the red leads
crosswise to the yellow ones.
1
1
5
6
2
3
4
10
8
7
EN
9 0!" § $ % & / 18
19
2
If the car does not have an on-board drive or
navigation computer, disconnect the negative terminal
of the car battery.
• If you disconnect the car battery in a car that has
an on-board drive or navigation computer, the
computer may lose its memory.
• If the car battery is not disconnected, to avoid
short-circuit, ensure that the bare wires do not
touch each other.
Ensure that car dashboard opening is within these
measurements:
Note
m
5m
•• If the unit is fixed by the supplied screws instead of the
sleeve, skip this step.
mm
53mm
183
Attach the front panel
1
Attach the trim plate.
2
Insert the left side of the panel in the chassis until it is
correctly engaged.
Press the right side of the panel until the mechanism
locks it into place.
•
3
Since the unit cannot be used if the slant angle of
dashboard opening is above 20 degrees, ensure
that the horizontal slant of the dashboard opening
is between 0 and 20 degrees.
When installing in a shallow space, change the position
of slide brackets.
3
4
Place the supplied rubber cushion over the end of the
mounting bolt.
5
Install the sleeve into the dashboard and bend the
tabs outwards to fix the sleeve. Slide the unit into the
dashboard until you hear a click.
Install remote control battery
Caution
•• Risk of explosion! Keep battery away from heat,
sunshine or fire. Never discard battery in fire.
Note
•• Remove battery if it is flat or if the remote control will
not to be used for a long time.
•• Battery contain chemical substances. It should be
disposed of properly.
1
Open the battery compartment.
EN
11
2
3
Insert one CR2025 battery with correct polarity (+/-)
as indicated.
Close the battery compartment.
2
Tap
3
Tap .
»» The setup menu is displayed.
4
Drag the bar downward with fingertip.
»» The date/time setup menu is displayed.
5
6
7
Tap on [Date], [Clock Mode] or [Time].
or
to set date/time.
Tap
to return to main menu.
When date/time is set, tap
to display the full menu.
Turn on
Caution
•• Risk of road accidents! Never watch videos or adjust
settings while you drive.
1
2
3
Press
to turn the unit on.
»» The available OSD (On-Screen Display) languages
are displayed.
Tap a language with fingertip.
»» The OSD language is changed to the selected
language immediately.
Tap a radio region with fingertip.
»» The OSD region is changed to the selected radio
region immediately.
4 Play audio/video/
picture
Load discs
4
Tap Finish button to confirm.
Set date and time
1
Tap
12
EN
to display main menu.
You can play video, audio or images stored on the following discs:
• DVD video, DVD-R, DVD-RW
• VCD
• Audio CD, CD-R, CD-RW
1
Insert the disc into the disc slot with label side facing up.
»» The disc starts playing automatically.
»» When USB device is disconnected, it plays the
previous source.
Insert SD card
Note
2
To remove the disc, press the button.
»» When the disc is ejected, the unit switches to the
previous source, if connected. Otherwise, the unit
switches to [Radio] mode automatically.
•• This device supports Secure Digital High Capacity
(SDHC) card.
1
2
Detach the front panel.
Insert the SD card into SD card slot.
»» Play starts automatically.
Note
•• Supported region code depends on where you bought
the car audio system.
Region Code
You can play DVD discs marked with the following region code.
DVD region code
Countries
Europe
Connect USB device
Remove SD card
1
2
Switch to another source.
Press the card until you hear a click.
»» The card is now disengaged.
Remove the SD card.Play/Pause
Note
•• Ensure that the device contains playable content.
1
2
Push the USB socket cover upside.
Insert the USB device into the USB slot .
»» The files play automatically.
1
2
To pause, tap .
To resume play, tap again.
To skip forward/backward, tap
•
.
Browse
During play from USB device or SD card, you can browse
through the listed audio/video or picture files to select
preferred file for listening or watching.
to return to playlist menu.
1
Tap or
Tap one of the icons below to select folder/file:
2
•
: to display all available audio folders/tracks.
•
: to display all available picture folders/files.
•
: to display all available video folders/files.
3
To remove the USB device, switch the car audio system
to other source first, then take off the USB device.
EN
13
2
3
3
4
5
Drag along the search bar to display the alphabet
pop-up.
Release the finger to refresh the list.
Tap on the name to start play.
Select audio track
For video discs that contain two or more audio tracks.
1
During play, tap anywhere except for the upper left
corner to display the control bar.
repeatedly to select audio track.
2
Tap
»» The audio channel information is displayed on
upper line of the screen.
Tip
•• You can also press DVD AUDIO on the remote
control repeatedly to change audio track.
Select subtitle language
For DVD or DivX discs that contain two or more subtitle
languages.
During play, tap anywhere except for the upper left
1
corner to display the control bar.
repeatedly to select a language.
Tap
2
»» The selected language is displayed.
Tap
Tap
to display the second menu.
to select:
• [Rep: chapter]: play the current chapter
repeatedly.
• [Rep: title]: play all chapters in the title repeatedly.
• [Rep: disc]: cancel repeat play.
For VCD karaoke:
to select:
Tap
• [Rep: one]: play the current track repeatedly.
• [Rep: disc]: cancel repeat play.
For CD/MP3/WMA audio files:
on the upper line of the screen to select:
Tap
•
: play the current track repeatedly.
•
: play all tracks in the current folder repeatedly.
•
: cancel repeat play.
Random play
You can play audio tracks/files in random order.
repeatedly to turn random play on or off.
During play, tap
•
(red): start random play.
•
(gray): cancel random play.
Select audio mode
When you play VCDs, you can select an audio mode (R/L/Stereo).
During play, tap anywhere except for the upper left
1
corner to display the control bar.
repeatedly until the preferred audio mode is
2
Tap
selected.
View photo
1
Tap .
»» Thumbnail view of the pictures is displayed.
2
3
Drag the bar downward to view all pictures.
Tap on a picture to view it in full screen.
Tip
•• You may also press SUBTITLE on the remote control
repeatedly to select subtitle language.
Change view angle
Some DVDs contain alternate scenes, such as scenes
recorded from different camera angles. For such DVDs, you
can select available alternate scenes.
repeatedly on the front panel.
Press TILT
»» The view angle is changed.
Repeat one/all chapter
During play, you can select different repeat play modes.
For DVD/VCD movie disc:
1
Tap anywhere except for the upper left corner to
display the control bar.
14
EN
Tip
•• You can also press
picture list.
on the remote control to view
Zoom
You can zoom in pictures for a close view.
1
During view pictures, tap anywhere except for the
upper left corner to display the control bar.
repeatedly to zoom in/out the picture.
2
Tap
Rotate pictures
1
2
During view pictures, tap anywhere except for the
upper left corner to display the control bar.
repeatedly to rotate the picture.
Tap
Store radio stations in memory
You can store up to 6 stations in each band.
Store stations manually
5 Listen to radio
Tune to a radio station
1
2
3
4
Tap
to display home menu.
Tap .
»» Band and frequency information is displayed.
Tap FM or AM to select band:
FM band options: FM1, FM2, FM3
AM band options: AM1, AM2
or
to tune to a radio station by step.
Briefly tap
• Tap or for over one second to tune to a
radio station automatically.
•
•
1
2
3
Select band.
or .
Tune to the station by tapping
Tap and hold one of the channels 1 to 6 over two seconds.
»» The station is saved under the selected channel.
Store stations automatically
You can search for a station with intro search, which broadcasts
a 10-second preview of each detected radio station.
Select band.
1
2
Tap .
3
Tap [Auto Store].
»» Auto search starts. The six strongest stations of
the selected band are saved in preset channels 1-6
automatically.
Tune to a preset station
1
2
Select band.
Tap one of the preset channels (1 to 6) to select a
preset station.
Tip
•• You can also press BAND on the front panel or
remote control repeatedly to select the band.
Select radio range
Before you start to search for radio stations, you can select
radio range.
1
Tap .
2
Tap [Radio Range] to toggle tuner sensitivity from
normal to high sensitivity.
• [Distance]: stations with strong or weak signals
can be broadcast.
• [Local]: only stations with strong signals can be
broadcast.
6 Play with RDS
The RDS (Radio Data System) function operates only in areas
with FM stations broadcasting RDS signals. If you tune to an
RDS station, an RDS icon and the station name are displayed.
Turn on RDS
1
Under radio mode, tap .
»» The radio option menu is displayed.
2
Tap [On] to turn on the RDS function.
EN
15
Select program type
Before tuning to RDS stations, you can select program type and
let the unit search only for programs of the selected category.
Under radio mode, tap .
1
»» The radio option menu is displayed.
2
Tap [PTY list].
»» The PTY list of available program type is displayed.
3
Swipe your finger on screen repeatedly to select an option.
»» The setting is changed.
RDS program types
Item
Program type
Description
1
NEWS
News services
2
AFFAIRS
Politics and current affairs
3
INFO
Special information programs
4
SPORT
Sports
5
EDUCATE
Education and advanced
training
6
DRAMA
Radio plays and literature
7
CULTURE
Culture, religion and society
8
SCIENCE
Science
9
VARIED
Entertainment programs
10
POP M
Pop music
11
ROCK M
Rock music
12
MOR M
Light music
13
LIGHT M
Light classical music
14
CLASSICS
Classical music
15
OTHER M
Special music programs
16
WEATHER
Weather
17
FINANCE
Finance
18
CHILDREN
Children’s programs
19
SOCIAL
Social Affairs
20
RELIGION
Religion
21
PHONE IN
Phone In
16
EN
22
TRAVEL
Travel
23
LEISURE
Leisure
24
JAZZ
Jazz Music
25
COUNTRY
Country Music
26
NATION M
National Music
27
OLDIES
Oldies Music
28
FOLK M
Folk Music
29
DOCUMENT
Documentary
30
TEST
Alarm Test
31
ALARM
Alarm
Activate AF/TA functions
Tap AF/TA on upper line of the screen to turn on/off the
corresponding function.
•
•
AF (alternate frequency): automatically searches for a different
station when the tuner cannot get a good reception.
TA (traffic announcement): allows you to receive traffic
announcements automatically no matter what source
you are listening to.
7 Use navigation
system
Insert map card
Note
•• Navigation map card is not included in the packaging of
the car entertainment system.
1
2
3
Press OPEN to release the panel.
Open the card door under the screen.
Insert the map card into the map card slot.
Pairing with unit
1
2
Tap
to display home menu.
Tap .
»» The setting menu is displayed.
3
4
to display Bluetooth setting menu.
Tap
Tap [New Pairing] to search for Bluetooth device with
your device.
Select the name of desired device in the pairing list.
Enter default password "0000" in your device.
»» iI the pairing succeeds. the phone call record is displayed.
5
6
GPS Card
4
5
Close the card door.
Attach the front panel.
Tip
•• You can press NAVI to enter/exit the navigation system.
Use map
1
2
Tap
to display main menu.
Tap .
»» The navigation menu is displayed in a few seconds.
3
Refer to the user manual of the navigation map to
operate the navigation tool.
8 Play with Bluetooth
device
Pairing with mobile phone
1
2
3
4
Open your mobile phone and switch on Bluetooth.
Search for other Bluetooth device with your device.
Select "CED780" in the pairing list.
Enter default password "0000".
»» If the pairing succeeds, the dial screen is displayed.
Disconnect Bluetooth devices
1
2
Under dial screen/Bluetooth audio mode, tap .
Tap [Paired Device].
»» The Bluetooth/Paired device screen is displayed.
3
Tap on one device that you want to reconnect/
disconnect.
• Tap (green) to reconnect the selected device.
• Tap (red) to disconnect the selected device.
You can make or receive phone calls with Bluetooth-enabled
phones through the unit. You can also listen to music from a
Bluetooth-enabled device.
Pair the Bluetooth-enabled devices
To connect your Bluetooth device to the unit, you need to pair
the device to the unit. Pairing needs only to be done once.
You can pair up to eight devices.
Note
•• The operational range between this unit and a
Bluetooth device is approximately 10 meters (30 feet).
•• Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
•• Compatibility with all Bluetooth devices is not guaranteed.
•• Any obstacle between this unit and a Bluetooth device
can reduce the operational range.
•• Keep this unit away from any other electronic device
that may cause interference.
Tip
•• If the Bluetooth device is paired, under disconnect
mode, tap
on top of the screen into the Bluetooth/
paired device list.
•• If there is no Bluetooth device in the paired device list,
tap
on top of the screen, "Paired list is empty" is
displayed, you can tap
to search the device.
•• If you do not want to reconnect the device to the
unit automatically, under Setting menu, tap
> [Auto
Connect], then select [Off]. For details, see "Adjust
Bluetooth settings" section.
EN
17
3
Make a call
When conversation ends, tap
the call.
(red) to terminate
You can make phone call with the unit under any mode.
Tip
Note
•• You can also press
terminate the call.
•• Ensure that the phone is connected to the unit via Bluetooth.
1
Tap
on top of the screen.
»» The dial screen is displayed.
/
on front panel to answer/
Switch phone call to mobile phone
If you do not want your passenger to hear your incoming call,
you can switch the call the mobile phone.
During talking, tap .
»» The voice is transferred from the loudspeaker to the
mobile phone.
2
3
Tap number icons directly to input phone number.
• Tap to clear the last input.
• Tap to clear all input.
• Tap to go back to previous screen.
to start calling.
Tap
Tip
•• You can also press and hold
transfer the call.
on front panel to
Bluetooth phone book settings
The users are allowed to search and dial the number stored
in the phone book.
on top of the screen.
1
Tap
»» The dial screen is displayed.
4
During talking, tap
2
to display the phone book mode.
Tap
»» Tap [Sync] to synchronize phone book.
3
Search the number you want to dial, then tap
start calling.
to display the keypad.
Receive call
By default, all incoming calls are received automatically.
Note
•• You can select to receive calls manually by set [Auto
Answer] to [Off] status. For details, refer to "Adjust
Bluetooth settings".
1
If there is an incoming call, [Incoming call…] is
displayed on the screen.
Tip
•• You can enter desired name/number on the keypad to
search quickly.
Favorite call
2
Tap
18
EN
(green) to answer/accept the call.
to
You can make a favorite call from the favorite call list.
on top of screen.
1
Tap
»» The dial screen is displayed.
2
Tap
to display the favorite call list.
9 Play iPod
Compatible iPod/iPhone
The car audio system supports below iPod/iPhone models:
3
Tap on desired number to start calling.
Adjust Bluetooth settings
1
2
In the Bluetooth menu, tap .
»» The option menu is displayed.
•
•
•
[New Pairing]: pair the new device.
[Paired Device]: display paired device.
[Display Design]: change the background.
Tap an option to change the setting.
Made for.
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
Works with.
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Listen to the iPod/iPhone
Listen to music from Bluetooth
device
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to the music
stored on the device through the unit. If the device also
supports Audio Video Remote Control Profile (AVRCP)
profile, you can use the control on the unit or its remote
control to play music stored on the device.
1
Pair the phone with the unit.
to return to home menu.
2
Tap
3
Tap .
4
The Bluetooth menu is displayed.
• Tap : switch to music mode.
• Tap : switch to dial screen mode.
• Tap : switch to phone book.
• Tap : switch to favorite list.
1
Connect your iPod/iPhone to the front USB socket via
Apple's own 30pin USB cable.
»» Music playback starts.
2
3
4
5
To pause/resume play, tap .
/
.
To skip a track, tap
/
.
To fast backward/forward, tap and hold
repeatedly to toggle between two control
Tap
modes:
• iPod control mode: use buttons/touch screen on
iPod/iPhone to control the music.
EN
19
•
Unit control mode: tap screen on car audio to
control the music.
Search for a track
During play from iPod/iPhone, you can search through the
music/video files to select preferred file for listening/watching.
1
During playing, tap .
»» Search list is displayed.
2
3
4
Tap to select folder/file.
Tap on the screen to select desired song.
Tap on the selected song to play.
2
3
Charge the iPod/iPhone
When the iPod/iPhone is connected to the car audio system,
the iPod/iPhone begins to charge.
Tip
•• For certain iPod models, it may take up to one minute
before the charging indication is displayed.
10 Adjust sound
4
5
Tap
or
to select a preset EQ:
[Custom]
[Techno]
[Rock]
[Classic]
[Jazz]
[Optimal]
[Flat]
[Pop]
Adjust EQ settings by tapping on the screen.
• [Bass] bass range: -14 to +14.
• [Middle] middle range: -14 to +14.
• [Treble] treble range: -14 to +14.
• [LPF] low pass filter range: 60, 80, 100, 160.
• [MPF] middle pass filter range: 0.5KHz, 1.0KHz,
1.5KHz, 2.5KHz.
• [HPF] high pass filter range: 10.0KHz, 12.5KHz,
15.0KHz, 17.5KHz.
If you are not satisfied with the adjusted sound settings,
to restore default settings.
tap
to exit.
Tap
•
•
•
•
•
•
•
•
Adjust fader/balance/subwoofer
You can adjust the sound balance between the front, rear, left,
and right speakers and subwoofer.
on upper line of the screen to display setting
Tap
1
menu.
.
2
Tap
Adjust volume
Rotate
clockwise/counterclockwise to increase/decrease
the volume.
Mute
You can turn off the sound of your audio.
/ on front panel.
During play, press
• To resume sound, press / on front panel again.
3
Select preset equalizer
1
Tap .
»» The current equalizer setting is displayed.
20
EN
4
Tap
or
to adjust fader/balance value.
[Fader] fader range: +16 to -16. (F = front
speaker, R = rear speaker)
• [Balance] balance range: -16 to +16. (L = left
speaker, R = right speaker)
Tap .
»» The subwoofer setting is displayed.
•
4
Tap 1/2/3 on the screen to adjust full sound setting.
Tip
•• You can also tap
on the upper line of the screen to
activate the full sound.
•
5
[Subwoofer]: tap [On]/[Off] on screen to turn
the subwoofer on or off.
• Tap or to select subwoofer volume: 0 to 12.
• [LPF]: tap screen to select subwoofer low pass
filter range: 80, 120, 160.
to exit.
Tap
Turn MAX sound on/off
During play, tap
on the upper line of screen.
•
(red): turn maximizing sound (MAX sound) on.
•
(gray): turn maximizing sound (MAX sound) off.
Switch music listening zone
Turn DBB on/off
Philips’ innovative Zone technology enables driver or
passengers to enjoy music with the best speakers balance and
experience more vivid spacial effect as the artist is intended
to create. You can switch the music listening zone from driver
to passengers for the best speaker sound settings in car.
on the upper line of the screen to display
1
Tap
setting menu .
twice.
2
Tap
3
The music zone setting is displayed.
When DBB (Dynamic Bass Boost) is activated, low tones will
be enhanced electronically.
on the upper line of screen to toggle between the
Tap
settings.
•
(red): DBB (Dynamic Bass Boost) function is activated.
•
(gray): DBB (Dynamic Bass Boost) function is deactivated.
11 Adjust settings
Display system setup menu
4
1
Tap
2
Tap .
»» The settings menu is displayed.
>
to display the full menu.
Tap on the screen to adjust music listening zone setting.
Turn FullSound on/off
Philips FullSound restores the audio details that is lost in
music compression. It enriches the music signal, so what you
hear is the full sound with every nuance of emotion and
every detail of musical genius. Philips FullSound can:
• Bring CD listening experience to MP3
• Achieve fuller bass with greater depth and impact
• Restore sense of spaciousness that is lacking in
compressed audio
• Enhance sound precision and detail
on the upper line of the screen to display
Tap
1
setting menu.
.
2
Tap
3
The full sound setting is displayed.
Adjust general settings
1
Tap
2
3
Drag the bar downward to view all settings.
Swipe your finger on screen repeatedly to select an
option.
»» The setting is changed.
.
EN
21
General settings
Options Description
[Radio Region]
Select one that matches your
location.
[Beep]
[On]
[Off]
[Language]
Turn the beep sound on.
Each time you press a button,
the unit beeps.
Turn off the beep sound.
[Navigation
Program Path]
[Navigation
Voice]
[Navigation
Voice Gain]
Select OSD (on screen
display) language.
[Calibration]
Calibrate the touch screen.
[Clock Mode]
[12Hr]/ Select time format.
[24Hr]
3
Access the Navigation
Program Path mode.
[On]
Turn the navigation voice on.
[Off]
Turn the navigation voice off.
[High]
Select the navigation voice
to high.
[Low]
Select the navigation voice
to low.
to exit.
Tap
[Date]
Set date.
Adjust Bluetooth settings
[Time]
Set time.
1
Tap
2
Tap on a setting repeatedly to change setting.
[Parking]
[On]
[Off]
Turn parking off.
[Camera]
[PAL/
NTSC]
Select camera format.
[Demo]
[On]
Turn demo mode on.
[Off]
Turn demo mode off.
4
to exit.
Tap
View Info settings
1
.
Turn parking on.
Tap
Bluetooth
settings
.
Options
[New
Pairing]
2
Drag the bar downward to view all detailed
information of the system.
Adjust Navigation settings
1
Tap
.
Swipe your finger on screen repeatedly to select an option.
»» The setting is changed.
Navigation
settings
[Navigation]
22
EN
Options
Description
[On]
Turn the navigation on.
[Off]
Turn the navigation off.
Pair new device.
[Auto
Connect]
[On]
[Off]
Need to reconnect manually.
[Auto
Answer]
[On]
Answer paired phone call
automatically.
[Off]
Answer phone call manually.
If the pre-paired device is within
effective range, the system
reconnects to pre-paired device
automatically.
[Pin Code]
Set code for pairing the car
entertainment system with
other Bluetooth devices. The
default code is 0000.
[Device
Name]
View the name of paired device.
3
2
Description
Tap
to exit.
12Others
Adjust brightness
1
2
AV IN
Press DISP on front panel repeatedly to adjust the
dimmer settings.
Press and hold DISP to turn off the display, press again
or tap on TFT screen to switch on.
Set rear view camera
If you connected a rear view camera, you can see from the
screen of the car audio system what the camera takes when
the back lamp lights up.
»» Picture from rear camera is displayed.
2
3
4
Tap
to display home menu.
[AV-IN1].
Tap
Operate the connected the device (see instruction
manual of the device).
Tip
•• If you connect the system to other audio devices
through the REAR OUT L/R connector (see "Wiring
Diagram" section), tap [AV-IN2] to listen to that device.
Detach the front panel
Tip
You can detach the front panel to deter theft.
1
Press OPEN to release the panel.
2
Push the right side of the panel leftward.
•• The default camera is NTSC system. Go to setting menu
to set PAL system, if your camera is not NTSC system.
Adjust display design
You can change the background screen on the playback mode.
In any mode, tap .
1
»» The option menu is displayed.
2
Tap [Display Design] to set the options.
3
4
•
•
•
•
3
[Wallpaper]: tap to change wallpaper on screen.
[Visualizer]: tap to change visualizer on screen.
[Skin]: tap to change OSD display color.
[Backlight]: tap to change main unit button
illumination color.
to exit.
Tap
Pull the panel towards you to disengage it from the chassis.
Store the panel in the supplied carrying case to protect
it from dirt or damage.
Reset
When the unit hangs up, you can reset it.
Press RESET with a ball-point pen or similar tool.
Listen to other devices
You can connect an external audio/video device to the car
audio system.
1
Connect the car audio to the device with the supplied AV cable.
EN
23
13 Product information
Note
•• Product information is subject to change without prior
notice.
General
Power supply
12 V DC (11 V - 16 V),
negative ground
Fuse
15 A
Suitable speaker impedance
4-8
50 W x 4 channels
Maximum power output
Tip
•• When the unit is reset, all the settings remain
unchanged.
Continuous power output
24 W x 4 channels
(4 10% T.H.D.)
Pre-Amp output voltage
4.0 V ( CD play mode; 1 kHz,
0 dB, 10 k load)
Subwoofer output voltage
4.0 V (CD play mode, 61 Hz,
0 dB, 10 k load)
Aux-in level
Replace fuse
If there is no power, the fuse may be damaged and need to
be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the damaged
fuse (15A).
4
Replace the fuse.
800 mV
Dimensions
(W x H x D)
182 x 53 x 210 mm
Weight (main unit)
3.1 kg
Disc player
System
DVD / CD audio / MP3 system
Frequency response
20 Hz - 20k Hz
Signal/noise ratio
>75dB
Total harmonic distortion
Less than 1%
Channel separation
>50dB
Video signal format
NTSC/PAL only
Video output
1 +/- 0.2Vp-p
Radio
Frequency range - FM
FUSE (15A)
87.5 - 108.0 MHz (50kHz
per step)
Frequency range - AM(MW)
522 - 1620 KHz (9kHz per step)
Usable sensitivity - FM
5 uV
Usable sensitivity - AM (MW) 25 uV
Tip
•• If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction. In this
case, consult your Philips dealer.
24
EN
LCD
Screen size
7.0 inches
Display resolution
800 x 480 dots
Contrast ratio
500
Brightness
450 cd/m2
Bluetooth
Communication system Bluetooth Standard version 2.0
Output
Bluetooth Standard Power Class 2
Maximum
communication range
Line of sight approx. 8m
Frequency band
2.4 GHz band (2.4000 GHz 2.4835 GHz)
Compatible Bluetooth
profiles
Hands-Free Profile (HFP)
Handset Profile (HSP)
Advanced Audio Distribution Profile
(A2DP)
Audio Video Remote Control
Profile (AVRCP)
Supported codecs
Receive
Transmit
SBC (Sub Band Codec)
SBC (Sub Band Codec)
Playability information
Compatible devices:
• USB flash memory (USB 2.0 or USB 1.1)
• Memory cards (SD / SDHC)
Supported USB formats:
• USB or memory file format: FAT16, FAT32
Supported MP3/WMA formats:
• ISO9660, Joliet
• MP3 bit rate (data rate): 32-320 Kbps and variable bit rate
• WMA v9 or earlier
• Number of tracks/titles: maximum 9000
• ID3 tag v2.0 or later
• Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz
• Supported Bit-rates: 32-320 Kbps and variable bit rate
Supported video formats:
• DVD
• Divx
Note
•• To ensure a better playback, it is recommended that file
image size is no higher than 640 x 480, frame rate is 20
fps, data rate is no higher than 500 kbps.
14Troubleshooting
Warning
•• Never remove the casing of this device.
If you encounter problems when using this device, check the
following points before requesting service. If the problem
remains unsolved, go to the Philips web site
(www.philips.com/welcome). When you contact Philips,
ensure that the device is nearby and the model number and
serial number are available.
No power
••
Car engine has not been started. Start the car engine.
••
Connections are incorrect.
••
Fuse has been damaged. Replace fuse.
No sound
••
Volume is too low. Adjust volume.
••
Speaker connections are incorrect.
No response to the remote control
••
Ensure that the path between the remote control and
the unit is clear from obstacles.
••
From a close distance, point the remote control directly
at the unit.
••
Switch F/R to correct position (F for front control and
R for rear control).
••
The function does not work. See the instruction manual.
••
Replace the remote control battery.
Disc does not play
••
Disc is upside down. Ensure that the printed side is upwards.
••
Disc is dirty. Clean the disc with a clean, soft, lint-free
cloth. Wipe the disc outwards from the center.
••
Disc is defective. Try another disc.
••
incompatible disc is used. Try another disc.
••
Disc rating exceeds the restriction setting. Change the
rating settings to lower one.
••
Disc region code is not compatible with the unit. Use
disc with proper region code.
No image
••
Parking wire connection is incorrect. Check the wiring.
No image on rear display
••
Check if you are playing DivX video. If yes, it’s normal, for this
device does not support video out in DivX playing mode.
Image flashes or distorted
••
Video DVD settings do not match with the DVD.
Adjust video DVD settings.
••
Video connection is improper. Check the connections.
Noise in broadcasts.
••
Signals are too weak. Select other stations with stronger signals.
••
Check the connection of the car antenna.
••
Change broadcast from stereo to mono.
Preset stations lost.
••
Battery cable is not correctly connected. Connect the
battery cable to the terminal that is always live.
Fuse is broken
••
The fuse type is incorrect. Replace it with a 15A fuse.
••
Speaker wire or power wire is grounded. Check the
connections.
To keep the warranty valid, never try to repair the system yourself.
EN
25
About the Bluetooth device
Music playback is unavailable on the system even after
successful Bluetooth connection.
••
The device cannot be used with the system to play music.
The audio quality is poor after connection with a
Bluetooth-enabled device.
••
The Bluetooth reception is poor. Move the device
closer to the system or remove any obstacle between
the device and the system.
Cannot connect with the system.
••
The device does not support the profiles required for
the system.
••
The Bluetooth function of the device is not enabled.
Refer to the user manual of the device to find out how
to enable the function.
••
The system is not in the pairing mode.
••
The system is already connected with another
Bluetooth-enabled device. Disconnect that device or all
other connected devices and then try again.
The paired mobile phone connects and disconnects constantly.
••
The Bluetooth reception is poor. Move the mobile
phone closer to the system or remove any obstacle
between the mobile phone and the system.
••
Some mobile phones may connect and disconnect
constantly when you make or end calls. This does not
indicate any malfunction of the system.
••
For some mobile phones, the Bluetooth connection may
be deactivated automatically as a power-saving feature.
This does not indicate any malfunction of the system.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
CED780_12_UM_V2.2