Philips 5000 series LCD TV 24PFL5637

Register your product and get support at
www.philips.com/welcome
22PFL5637/V7
24PFL5637/V7
32PFL5637/V7
32PFL5657/V7
EN User manual
Cover 2 Blank
Contents
1 Notice
2
2 Important
3
Product disposal Guidelines
3 Use your TV
4
5
4
Use more of your TV
11
5
Play photos, music and videos
on USB storage devices
18
6 Troubleshooting
20
7 Product information
22
8
Consumer Guidelines
24
9
Warranty
25
EN 1
1
Notice
Pixel characteristics
This LCD/LED product has a high number of
color pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
2 EN
Warranty
No components are user serviceable Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops.
Failure to do shall void any warranty, stated
or implied.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
2
Important
Risk of injury or damage to the TV!
•
Two people are required to lift and carry
a TV that weighs more than 25 kg or 55
lbs.
Read and understand all instructions before you •
When stand mounting the TV, use only
use your TV. If damage is caused by failure to
the supplied stand. Secure the stand to
follow instructions, the warranty does not apply.
the TV tightly. Place the TV on a flat, level
surface that can support the combined
weight of the TV and the stand.
Safety
•
When wall mounting the TV, use only a
Risk of electric shock or fire!
wall mount that can support the weight of
•
Never expose the TV to rain or water.
the TV. Secure the wall mount to a wall
Never place liquid containers, such as
that can support the combined weight of
vases, near the TV. If liquids are spilt on
the TV and wall mount.PE Electronics
or into the TV, disconnect the TV from
Ltd. bears no responsibility
the power outlet immediately. Contact
for improper wall mounting that result in
Philips Consumer Care to have the TV
accident, injury or damage.
checked before use.
Risk of injury to children!
•
Never place the TV, remote control or
Follow these precautions to prevent the
batteries near naked flames or other
TV from toppling over and causing injury to
heat sources, including direct sunlight. To
children:
prevent the spread of fire, keep candles
•
Never place the TV on a surface covered
or other flames away from the TV, remote
by a cloth or other material that can be
control and batteries at all times.
pulled away.
•
Ensure that no part of the TV hangs over
the edge of the surface.
•
Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
•
Never insert objects into the ventilation
•
Educate children about the dangers of
slots or other openings on the TV.
climbing on furniture to reach the TV.
•
When the TV is swivelled ensure that
Risk of swallowing batteries!
no strain is exerted on the power cord.
•
The product/remote control may
Strain on the power cord can loosen
contain a coin-type battery, which can be
connections and cause arcing.
swallowed. Keep the battery out of reach
Risk of short circuit or fire!
of children at all times!
•
Never expose the remote control or
Risk
of overheating!
batteries to rain, water or excessive heat.
•
Never install the TV in a confined space.
•
Avoid force coming onto power plugs.
Always leave a space of at least 4 inches
Loose power plugs can cause arcing or
or 10 cm around the TV for ventilation.
fire.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
EN 3
Risk of damage to the TV!
•
Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Risk of injury, fire or power cord damage!
•
Never place the TV or any objects on the
power cord.
•
To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
•
When you disconnect the power cord,
always pull the plug, never the cable.
•
Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
•
Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
•
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting the
TV to the power outlet.
Screen care
•
•
•
•
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
Product disposal Guidelines:
For the purpose of recycling to facilitate effective utilization of resources, please
return this product to a nearby authorized collection center, registered dismantler,
recycler, service center when disposing of this product.
In case of further assistance, you may contact nearest authorized service center.
Or Please see the Company website for further information on collection centers etc.
Visit-http://www.philips.com
OR Standard Call Rates Apply-1860 180 1111, Toll Free Number - 1800 102 2929
(
)
Visit-http://www.philips.com
OR Standard Call Rates Apply-1860 180 1111, Toll Free Number - 1800 102 2929
RoHS
COMPLIANT
4 EN
3 Use your TV
Congratulations on your purchase, and welcome to Philips To fully benefit from the
support that Philips offers, register your TV at www.philips.com/welcome.
3.1 Name and Function of Control on Set (22PFL5637/V7)
A) TV controls and Indicators
1
2
1) LED INDICATOR
2) IR SENSOR
3) STAND BY
4) SOURCE (TV/AV)
5)
6)
7)
8)
9)
MENU
CHCH+
VOLVOL+
B) Connectivity
YPbPr
9
8
7
6
5
4
3
10
10)
11)
12)
13)
14)
15)
AC POWER IN
HDMI
USB
VGA AUDIO IN
VGA IN
YPbPr
16)
17)
18)
19)
20)
21)
L1 IN (YPbPr/AV)
R1 IN (YPbPr/AV)
V1 IN
AV2 IN
AV OUT
RF
Note :
1) Above sketch and connectivity are just for representation actual product may look
different as per model selection.
EN 5
3.2 Name and Function of Control on Set
(24PFL5637/V7)
A) TV controls and Indicators
3
9
8
7
4
6
: Standby indicator and remote
controller sensor.
: Access the home menu.
5
1
: Source Selection and Submenu entry.
2
: Switch the TV on or off.
1) LED INDICATOR
2) IR SENSOR
3) STAND BY
4) SOURCE (TV/AV)
5)
6)
7)
8)
9)
: Switch Channels.
: Adjust Volume.
MENU
VOLVOL+
CHCH+
B) Connectivity
YPbPr
10
10)
11)
12)
13)
14)
15)
AC POWER IN
HDMI
USB
VGA AUDIO IN
VGA IN
YPbPr
16)
17)
18)
19)
20)
21)
L1 IN (YPbPr/AV)
R1 IN (YPbPr/AV)
V1 IN
AV2 IN
AV OUT
RF
Note :
1) Above sketch and connectivity are just for representation actual product may look
different as per model selection.
6 EN
3.3 Name and Function of Control on Set
(32PFL5637/V7, 32PFL5657/V7)
A) TV controls and Indicators
3
4
5
1) LED INDICATOR
2) IR SENSOR
3) STAND BY
4) SOURCE (TV/AV)
5)
6)
7)
8)
9)
9
8
7
6
: Switch Channels.
1
2
: Source Selection and Submenu entry.
MENU
VOLVOL+
CHCH+
: Adjust Volume.
: Standby indicator and remote
controller sensor.
: Access the home menu.
: Switch the TV on or off.
23
22
B) Connectivity
YPbPr
10
10)
11)
12)
13)
14)
15)
16)
AC POWER IN
HDMI3
HDMI2
HDMI1
USB
VGA AUDIO IN
VGA IN
3
17)
18)
19)
20)
21)
22)
23)
YPbPr
L1 IN (YPbPr/AV)
R1 IN (YPbPr/AV)
V1 IN
AV2 IN
AV OUT
RF
Note :
1) Above sketch and connectivity are just for representation actual product may look
different as per model selection.
EN 7
3.4 Name and Function of Control on Remote
1
2
17
3
4
16
15
14
5
13
6
12
7
8
9
10
8 EN
11
1
(Standby-On)
Switches the TV ON or OFF.
The TV is not powered off completely
unless it is physically unplugged
Multimedia Control buttons
• Control video or music.
12
•
2
3
4
•
FIND
Depending on model.
•
(Home )
Access the home menu.
5
•
•
SOURCE
Selects connected devices.
•
Mute or restore audio.
6
7
(Previous/Next)
CH - / CH +
Switch channels or navigate through
menu pages, tracks, albums or
folders.
•
13
•
OPTIONS
Access options for the current
activity or selection.
Return to the previous menu or exit
a function.
14 OK
•
Confirm an entry or selection.
15
•
16
•
17
(Navigation buttons)
Navigate through menus and select
items. (Also in USB mode).
ADJUST
Access the menu to adjust settings.
Color buttons
• Select tasks or options
8
+/• Adjust volume.
3.5 Remote control usage
9
0-9 Numeric buttons
• Select channels.
10
SUBTITLE
• Depending on model.
When you use the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight between
the remote control and TV is not blocked by
furniture, walls or other objects.
11
TEXT
• Depending on model.
~5m
~30º
EN 9
3.6 Battery Installation
1. Remove the battery compartment door.
2. Install 2 “AAA” or UM-4 (1.5V) batteries or equivalent with the correct polarity
as indicated.
3. Refix the battery compartment door.
10 EN
4 Use more of
your TV
4.2 Manually adjust picture setting
Smart Picture
Picture
Contrast
Sound
Brightness
Color
4.1 Main Menu
Installation
Menus help you to install channels, change
picture and sound settings and access other
TV features.
Features
Hue
Sharpness
Color Temperature
Parental
Blueback
Digital Crystal Clear
Pixel Plus HD
1
Press
» The menu screen appears.
Picture
Picture
Geometric
Geometric
Sound
Sound
Features
Installation
Installation
Features
Watch TV
Device List
Parental
Browse USB
2
Setup
1
Press .
2
Select [Setup] > [Picture] ,
then press OK.
3
Select one of the following settings, then
Press
to move, and press
to adjust.
[Smart picture] : Access predefined smart
picture settings.
[Contrast] : Adjust the intensity of
backlight areas, while the video contents
are kept unchanged.
[Brightness] : Adjust the intensity and
details of dark areas.
[Color] : Adjust color saturation.
•
Select one of the following, then press
OK
[Watch TV] : If a source other than •
•
antenna is selected, switch back to
the antenna source
•
•
[Browse USB]: View photos and
play music and movies contained in
•
USB storage devices.
•
•
[Device List] : Access menus to
change other source by pressing key.
•
•
[Setup] : Access menus to change
picture, sound and other settings.
•
•
[Sharpness] : Adjust sharpness in the
image.
[Hue]: Compensate for color variations.
(Available only for NTSC channels).
[Color Temperature]: Adjust the color
balance in an image.
[Blueback] :This function is used to ON/OFF
the blue screen at no signal condition.
EN 11
[Pixel Plus HD] :
4.3 Use Smart Picture
To enhance the picture quality
Use smart picture to apply pre-defined
picture settings.
• [Flesh Tone] : Adust Flesh tone
• [Noise Reduction]: Filter and reduce noise
in an Image
Smart Picture
Vivid
Smart Sound
• [Dynamic contrast] : Enhance
contrast.
Picture Format
Freeze
•
[Color enhancement] : Make
colors more vivid and improve the
details in bright colors. You can
switch this feature ON or OFF.
[Geometric] :
•
[Auto Setting]:This automatically adjust
Sleep Timer
Geometric
1
Press
2
Select [Smart Picture], then press OK.
3
Select one of the following settings, by
H & V-position,Phase and Clock for VGA
mode.
• [H-Position] : Adjust the horizontal
position of image [Only in VGA].
• [V-Position]: Adjust the vertical
position of image [Only in VGA].
•
[Manual Clock]: If picture is not OK
with Auto Setting, then adjust by manual
clock [Only in VGA].
•
[Phase]: If picture is not OK with Auto
Setting, then adjust by phase.
[Only in VGA].
•
•
•
•
•
ADJUST.
[Bright]: Ideal settings for night time.
[Vivid] : Rich and dynamic settings,
ideal for daytime.
[Sport] : Ideal settings for sport.
[Cinema]
: Ideal settings for movies.
.
[Personal]: Apply your customised
picture settings.
4.4 Use Picture Format
1
Press
2
Select [Picture Format], then press OK
Select any picture format, then press OK
3
ADJUST.
Note
• Depending on the format of the picture
source, some picture settings may not be available.
4.5 Use Freeze option
1
Press
2
Select [Freeze], then press OK
Select option as ON to freeze the
picture.
3
12 EN
ADJUST.
4.6 Manually adjust sound setting
Smart Sound
Picture
Sound
Equalizer
Bass
Treble
Installation
Balance
Features
Volume
• [Incredible Surround ] :
Enable Incredible Surround for stereo
Sources
[AV Out ]:
Select Fixed for default settings and
variable to vary it.
[AV Out Volume] : The AV Out volume can be
adjusted by this option.
Speakers
Parental
AVL
Incredible Surround
4.7 Use Smart Sound
Picture
AV Out
Sound
AV Out Volume
Use smart sound to apply pre-defined
Sound settings.
Installation
Features
Smart Picture
Smart Sound
Standard
Parental
Picture Format
1
Press .
2
Select [Setup] > [Sound]
then press OK
3
Select one of the following settings, then
Press
to move, and press
to adjust.
•
[Smart Sound] : Access predefined smart
sound settings.
•
[Equalizer] : Adjust the equalizer ON
various frequencies.
•
[Bass] : Adjust the bass level.
•
[Treble] : Adjust the treble level.
•
[Balance] : Adjust the balance of the right
and left speakers.
•
[Volume] : The main speaker volume can be
adjusted by varying this volume bar.
•
[Speakers] : The main speakers can be
made ON / OFF by this option.
[AVL] : Auto volume leveler
automatically reduces sudden
volume changes, for example when
switching channels.
•
Freeze
Sleep Timer
Geometric
1 Press ADJUST.
2 Select [Smart Sound], then press OK.
3 Select one of the following settings, by
[Smart sound] : Access predefined smart
sound settings.
• [Standard] : Settings that suit most
environments and types of audio.
• [Music] : Ideal settings for listening to music.
• [News] : Ideal settings for spoken audio,
such as news.
• [Personal]: Apply the settings that were
customised in the sound menu.
4.8 Use Sleep Timer
1 Press ADJUST
.
2 Select [Sleep Timer], then press OK.
Press
adjust the Sleep timer OFF and ON
in step of 5,10,30,60,120 min
EN 13
Program Edit
4.9 Installation Menu
1
Channel No.
Picture
Sound System
Auto Install
Installation
Features
83.25MHZ
3
105.25MHZ
4
169.25MHZ
5
Color System
Sound
48.25MHZ
2
Manual Install
175.25MHZ
6
203.25MHZ
7
224.25MHZ
8
463.25MHZ
9
545.75MHZ
10
551.25MHZ
Program Edit
1 Delete
Parental
OK
Press .
2
Select [Setup] > [Installation]
then press OK
3
Select one of the following settings, then
•
•
•
Reutrn
[Channel No.] : Display the channel number of
the current channel.
[Color System] : Change the color system
(AUTO/PAL/SECAM) setting if the picture is not
reproduced properly.
Note: For India color system is Auto or
PAL.
Move
Move the cursor to the program, Select
Move option by pressing 3 button and press
to move the program.
to move, and press
to adjust.
[Sound System] : Change the sound
sound system (BG/I/DK) setting if sound
is not reproduced properly.
Note: For India sound system is BG.
[Auto Install] :Select the function TV
set will start auto tuning for all available
channels.
[Manual Install] :Select this for manually
searching the channels,select the function
from which tuning will start.
•
FAV
MENU
Name
Move the cursor to the program, Select
Rename option by pressing 2 button to rename
the program. Press
to choose the character.
Press
to move the cursor.
Press OK button to Enter ,
Press Menu button to Return the Edit Menu.
Press
•
Select
Prev./Next
Delete
Select Delete option by Pressing 1 button, the
program will be deleted.
1
•
Enter
2 Rename 3 Move 4 Skip
[Program Edit]: You can Delete, Rename,
Move or Skip any programmes.
14 EN
Skip
Select Skip option by pressing 4 button to
skip this program.
4.10 Features Menu
1
Press
2
Select [Setup] > [Features]
then press OK
3
4.11 Parental Menu
Child Lock
Picture
Select one of the following settings.
then press. OK.
Installation
Press
Features
to move, and press
to adjust.
Back Light
Picture
Sound
Installation
Features
Hotel Mode Control
Sound
Parental
Energy Saving
Power On Music
E-Sticker
1
Press
EasyLink
2
Select [Setup] > [Parental]
then press OK
Select one of the following settings.
then press OK.
Software Update
Reset
Parental
• [Back Light] : The backlight value
can be varied . This function used to
adjust brightness level of panel.
• [Energy Saving]: TV is in Normal
state when this is OFF, to save
the power consumed by TV, select
power saving modes low/Mid/ High,
Audio only Mode. In Audio Only
mode only audio is ON and Picture is OFF.
Press any key ( except Vol +/- and mute )
to exit 'Audio only' mode
• [Power On Music] : Make the sound ON/
OFF while switching from standby mode
• [E-Sticker] : Switch the sticker ON or
OFF (For Shop mode only).
Note: Depends on Model
3
• [Child Lock]: Enter the password, then
the following menus will open.
Note: Default password is “0000”
• [Child Lock Switch]:Make the child lock
switch ON to lock the source/channel.
• [Change Password]: Select this option
to change. the password.
• [Channel Block]: Select the channels to
.to be locked
. and press ‘2’ to lock or
unlock the channels.
• [Video Lock]: Select the sources
with up/down keys on remote and press
OK to set or clear lock.
• [Clear All]: Reset the child lock
option to default value.
• [Easy Link]: If you connect HDMI-CEC
compliant devices through HDMI,you
can control them at the same time with
your TV remote control.
• [Software Update] :
This option is for updating the software.
• [Reset] : Reset to factory default settings.
EN 15
[Hotel Mode Control]: Enter the
password,then following menus
will open.
Note: Default password is “0000”
• [Hotel Mode Control]: Make this
switch ON to Activate the Hotel
mode features selected by user. When
Switch is OFF the Hotel Mode options
will not operate.
• [Change Password]: Select this
option to change the password.
• [OSD Display Disable]: Selecting the
ON Option, Display information will
not be displayed.
4.12 Use Philips EasyLink
Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control
features.
If your HDMI-CEC compliant devices are
connected through HDMI, you can control
them at the same time with your TV remote
control.
To enable Philips EasyLink, you need to:
•
Connect HDMI-CEC
compliant devices through HDMI
•
Configure each HDMI-CEC compliant
device properly
•
Switch on EasyLink
OPTIONS > Status key.
• [Key Lock]: Select the option ON,
the panel keypad will not operate.
• [Disable Search]:Making this option
ON, the channel search will be
disabled for user.
• [Max Vol.]: The main volume is limited
by setting Max volume.User cannot
increase the main volume greater than
max volume selected.
• [Power On Set]:
• [Power On Source]:When the TV
is switched ON, the power on source
will be same as your last selection.
• [Power On Channel]:When the TV
is switched ON, the power on channel
will be same as your last selection.
Power on channel will be disabled
when source is changed.
• [Power On volume]:When the TV
is switched ON, the power on volume
will be same as your last selection.
• [Clear All]: Reset the Hotel mode
options to default value.
Note
• The EasyLink-compliant device must be
switched on and selected as the source.
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
4.13 Switch on or off EasyLink
1
Press
2
Select [Setup] > [Features] >
[EasyLink] > [EasyLink]
.
3
Select [On] or [Off] , then press OK
Note
• If EasyLink is OFF, all its submenus are
unavailable.
Easy Link
Picture
Sound
Device Search
Device List
Installation
Features
Parental
16 EN
Auto turn off
Device Menu
4.14 Switch the device ON or OFF
When an HDMI-CEC compliant device
is connected and TV switches to standby,
the device gets turned OFF automatically.
4.17 Use Geometric
Use Geometric to automatically adjust phase
and Clock for VGA mode
Smart Picture
1
Press
Smart Sound
2
Select [Setup] > [Features] >
[EasyLink] > [Auto turn off] >
Picture Format
Select [On] or [Off], then press OK
Sleep Timer
3
Freeze
Geometric
When an HDMI-CEC compliant device
is connected and TV is switched ON, then
the device gets turned ON automatically.
1 Press
ADJUST.
2 Select [Geometric], then press OK.
4.15 Search the connected devices
This automatically adjust H & V-position,
Phase and Clock for VGA mode
Search the HDMI-CEC compliant devices
connected to your TV and list them using
Device list.
1
Press
2
Select [Setup] > [Features] >
[EasyLink] > [Device Search] >
4.18 Use the Options menu
Status
Energy Saving
Guide Bar
4.16 Control the device using TV
remote
Now use a single remote to control your
CEC enabled device.
1
Press
2
Select [Setup] > [Features] >
[EasyLink] > [Device Menu]
Play
Pause
FR
FF
Prev.
Next
Stop
Press
to select the function icon, press
OK button to confirm the function.
Visit options relevant to current action or
selection.
1
While you watch TV, press
OPTIONS.
The TV options menu appears.
2
Select one of the following options, then
press OK.
•
[Status]: Display information
concerning currently viewing
channel.
[Energy Saving]: Relevant setups.
• Press
to conserve energy.
[Guide Bar] : Relevant menu
Press
to access menu bar.
Note : Guide Bar only applicable for
HDMI (CEC) & USB Source.
EN 17
5 Play photos, music and videos
on USB storage devices
5.3 View a slide show of your photos
Press the following buttons to control
play of selected photos.:
Select photos by OK key :
to play.
•
•
to pause.
•
or
to play the previous or next
photo.
PHOTO MUSIC VIDEO TEXT
ABC
5.4 Listen to music
5.1 Connect a USB storage device to play
photos, music or videos stored on it.
1
Switch on the TV.
2
Connect the USB device to the USB port
on the side of your TV.
3
Press
4
Select [Browse USB], then press OK
The USB browser appears.
1
In the USB browser, select [Music], then
press OK.
2
Select a music track or album, then press
OK or
to play.
5.5 Watch video
1
In the USB browser, select [Video], then
press OK.
2
Press OK or
to play.
To control play, press the play buttons:
•
to play/pause.
•
or to play the previous or next
video.
3
5.2 View photos
1
In the USB browser, select [Photo], then
press OK.
2
Select a photo or a photo album, then
OK to view the photo
•
To view the next or previous photo,
press
then press to play
5.6 Text
1
In the USB browser, select [Text], then
press OK.
2
Select a Text File, then Press
OK or
18 EN
to play.
5.7 Use the Options menu
Music mode menu bar:
00:00:33/00:04:22
Status
Pause
FR
FF
Prev.
Next
Stop
Energy Saving
All
Playlist
00:00:33/00:04:22
Guide Bar
Info. Goto Time
Visit options relevant to current action or
selection.
1 While you watch TV, press
OPTIONS.
» The TV options menu appears.
2 Select one of the following options, then
press OK.
• [Status]: Not Applicable For USB
• [Energy Saving]: Relevant Controls
• Press
to conserve energy.
• [Guide Bar]: Relevant menu bar
Press
to access menu bar
Note : Guide Bar only applicable for
HDMI (CEC) & USB Source.
Press
to select the function icon, press
OK button to confirm the function.
Video mode menu bar:
00:00:33/00:04:22
AB
Pause
FR
You can select the multimedia functions
like play, Pause, FF, FR, Next, Previous.
Stop etc.
To use above functions press
OPTIONS , then select ‘Guide Bar”.
Picture mode menu bar:
Pause
Prev.
Next
Rotate Zoom In Zoom Out
Stop
All
Music Playlist Info.
Prev.
Next
Stop
All
Set A
00:00:33/00:04:22
Playlist Info.
Slow
Step Goto Time Zoom In Zoom Out
Move
Press
to select the function icon, press
OK button to confirm the function.
Text mode menu bar:
Prev Page Next Page
5.8 Music,Photo, video, text
mode control menu bars
FF
Prev.
Next
Stop
Music Playlist
Info.
Press
to select the function icon, press
OK button to confirm the function.
5.9 Disconnect a USB storage device
Caution
• Follow this procedure to avoid damage to your
USB storage device.
1
Press
2
Wait for five seconds, then disconnect
the USB storage device.
to exit the USB browser.
Move
EN 19
6 Troubleshooting
6.2 TV channel issues
This section describes commonly encountered
issues and accompanying solutions.
Previously installed channels do not appear in
the channel list:
Check that the correct channel list is
selected.
6.1 General TV issues
6.3 Picture issues
The TV does not switch on:
The TV is on, but there is no picture:
Disconnect the power cable from the power
Check that the antenna is properly
outlet. Wait for one minute then reconnect it.
connected to the TV.
Check that the power cable is securely
Check that the correct device is selected
connected.
as the TV source.
The remote control is not working properly:
There is sound but no picture:
Check that the remote control batteries
Check that the picture settings are
are correctly inserted according to the +/correctly set.
orientation.
There is poor TV reception from an antenna
Replace the remote control batteries if they are connection:
flat or weak.
Check that the antenna is properly
Clean the remote control and TV sensor lens.
connected to the TV.
The standby light on the TV blinks red:
Loudspeakers, unearthed audio devices,
Disconnect the power cable from the power
neon lights, high buildings and other large
outlet. Wait until the TV cools down before
objects can influence reception quality.
reconnecting the power cable. If the blinking
If possible, try to improve the reception
reoccurs, contact Philips Consumer Care.
quality by changing the antenna direction
You forgot the code to unlock the TV lock feature
or moving devices away from the TV.
Enter ‘8202’.
If reception on only one channel is poor,
When turning the TV on/off/to standby, you hear a
fine tune this channel.
creaking sound from the TV chassis:
There is poor picture quality from connected
No action is required. The creaking sound is
devices:
normal expansion and contraction of the TV as it
Check that the devices are connected
cools down and warms up. This does not impact
properly.
performance.
Check that the picture settings are
Cannot remove ‘e-sticker’ banner displayed on the TV.
correctly set.
To remove the logos and images, set the
The TV did not save your picture settings:
E-Sticker to Off.
Check that the TV location is set to the
1. Press
home setting. This mode offers you the
2. Select [Setup] >[Features] > [E-Sticker]
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
Try using a different picture format.
The picture position is incorrect:
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
20 EN
6.4 Sound issues
6.7 Contact us
There is a picture but sound quality is poor:
If you cannot resolve your problem, refer to the
FAQs for this product at www.philips.com/support.
or Contact Customer Service Center.
Note
If no audio signal is detected, the TV
automatically switches the audio output off
this does not indicate malfunction.
Check that all cables are properly connected.
Check that the volume is not set to 0.
Check that the sound is not muted.
There is a picture but the sound quality is poor:
Check that the sound settings are correctly
set.
There is a picture but sound comes from one
speaker only:
Verify that sound balance is set to the centre.
Warning
Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
6.5 HDMI connection issues
There are problems with HDMI devices:
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay the
time taken for a TV to display content from a
HDMI device.
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
If there are intermittent sound disruptions,
check that output settings from the HDMI
device are correct.
If you use an HDMI-to-DVI adapter or
HDMI-to-DVI cable, check that an additional
audio cable is connected to AV IN.
6.6 Computer connection issues
The computer display on the TV is not stable:
Check that your PC uses the supported
resolution and refresh rate.
Select the “Auto Setting” function.
1. Press
2. Select [Setup] >[Picture] >[Geometric]
[Auto Setting].
EN 21
7 Product
information
7.3 Remote control
Type: YKF293-001
Batteries: 2 x AAA (LR03 type)
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
7.4 Multimedia
7.1 Supported display resolutions
Computer formats (HDMI)
Resolution - refresh rate:
720 x 480p - 60Hz
720 x 576p - 50Hz
1280 x 720p - 50Hz,60Hz
1920 x 1080p -50Hz,60Hz
Supported USB storage device:
(Only FAT 16 or FAT 32 USB storage
devices are supported)
Supported storage file formats:
Images : JPEG, BMP, PNG
Audio : MP3,WMA.
Text
Video :
Computer formats (VGA)
Resolution - refresh rate:
640 x 480 - 60Hz,72Hz,75Hz
800 x 600 - 56Hz,60Hz,72Hz,75Hz
1024 x768 - 60Hz,70Hz,75Hz
1280 x 1024 - 60Hz
Video Formats
Resolution - refresh rate:
720 x 480i - 60Hz
720 x 480p - 60Hz
720 x 576i - 50Hz
720 x 576p - 50Hz
1280 x 720p - 50Hz, 60Hz
1920 x 1080i - 50Hz, 60Hz
Note
1) 1080p support only for FHD model
7.2 Tuner/Reception/
Transmission
Antenna input: 75ohm coaxial (IEC75)
TV system: PAL,B/G
Video playback: NTSC, SECAM, PAL
Tuner Bands: UHF, VHF
Note
1) USB file names must not exceed 128
characters.
2) The USB features/functions may vary
from file to file depending on relative
information present in the file
7.5 Power
Mains power: 110-240V, 50Hz-60Hz
Ambient temperature: 5 to 40 degrees
Celsius
Power consumption
22PFL5637/V7: 60W
24PFL5637/V7: 75W
32PFL5637/V7: 150W
32PFL5657/V7: 150W
22 EN
7.6 Supported TV mounts
To mount the TV, purchase a Philips TV mount
or VESA - compatible TV mount.To Prevent
damage to cables and connectors,be sure to
leave a clearance of at least 2.2 inches or 5.5 cm
from the back of the TV.
Warning
Follow all instructions provided with the TV
mount. PE Electronics Ltd. bears no
responsibility for improper TV
mounting that results in accident, injury or
damage.
TV screen
size (inches)
Required
pitch (mm)
Required
mounting bolts
100
Not Applicable
24PFL5637/V7
100 x 100
4 x M5
32PFL5637/V7
200 x 200
4 x M5
32PFL5657/V7
200 x 200
4 x M5
22PFL5637/V7
7.7 Product specification
Design and specifications are subject to change
without notice.
22PFL5637/V7
24PFL5637/V7
With TV stand
Dimension(WxHxD): 612 x448 x
199 (mm)
Weight: 6.5 kg
Without TV stand
Dimension(WxHxD): 612 x 398 x
90 (mm)
Weight: 5.4 kg
32PFL5637/V7
With TV stand
Dimension(WxHxD): 784 x 544 x
240 (mm)
Weight: 10.9 kg
Without TV stand
Dimension(WxHxD): 784 x 498 x
89 (mm)
Weight 9.1 kg
32PFL5657/V7
With TV stand
Dimension(WxHxD): 784 x 544 x
240 (mm)
Weight: 10.9 kg
Without TV stand
Dimension(WxHxD): 784 x 498 x
89 (mm)
Weight 9.1 kg
With TV stand
Dimension(WxHxD): 539 x390 x
170 (mm)
Weight: 4.7 kg
Without TV stand
Dimension(WxHxD): 539 x 343 x
70 (mm)
Weight: 4.5 kg
EN 23
Consumer Guidelines
1.Kindly ensure that the dealer fill out Warranty card correctly.
2.To avail the Warranty please register your product with the Philips• Log on to www.Philips.com
OR
• Contact Philips Consumer Care Centre
3.In the unlikely event of a defect developing in the TV set contact the Philips Customer
Care Centre for obtaining warranty service and inform of the defect observed in the
set, the type no. and serial no. of the set.
4.On your lodging a complaint, a trained technician will call on you promptly. In the
event of the technician deciding that set requires attention at the service station;the
technician would arrange to get the set picked up to be delivered to service station
for further attention. “Homecalls” by the technician would however be restricted within
the municipal limits of the city/town in which the set has been registered.
Type no.
Serial No.
Date of Purchase
Purchased By: Name
Address:
Tel.No.
Sold by: Name
Address:
Tel.No.
Sold by(User rubber stamp)
Model no.: 22PFL5637/V7
24PFL5637/V7
32PFL5637/V7
32PFL5657/V7
Serial no.:
Contact Customer Service Executive at:
1860 180 1111 (Standard Call Rates Apply)
1800 102 2929 (Toll Free No.)
Regd Office: PE Electronics Ltd,Auto Cars Compound,Adalat Road,Aurangabad,431005.
24 EN
Front
WARRANTY
This TV receiver is covered under
warranty against any defect arising out
of faulty or defective material or workman
ship for a period of 12 months from the
date of purchase.
Should a defect develop in this set during
the period of warranty,PE Electronics
Limited undertakes to get the
set repaired free of charge either
From whom the set has been purchased or
through an Authorised Service Center for
warranty service. However, if the
Purchaser has to shift his residence to
another town on account of transfer or
other reasons, the warranty benefit will be
available at the Authorised Service Center
of that town.
The warranty is not valid in case of any of
the following events:
The TV set is not used according to instructions given in the ‘Direction for use’
/ ‘User Manual’
Defects are caused by improper or reckless use.
Any repair work carried out by persons other than a Philips dealer or Authorised
Service Center.
Any modification or alteration of any nature made in the electrical circuitry of the set.
This Warranty Card is not completed and signed immediately on delivery of the set
by the Philips Dealer.
Fading effects and/or Ghosts (Multiple Image) in picture, if any,arising due to location
/ signal reception.
Defects due to causes beyond control like lightning, abnormal voltage, Acts of God or
while in transit to purchaser’s residence.
(Refer Consumer Guidelines for further details)
EN 25
Back
Cover 3 Blank
LCD TV 22",24",32” (1 100090030)
S82VG Rev.00 Rajmudra