Philips 32HFL5662D 31.633" Black

User Manual
22HFL5662H
26HFL5662H
32HFL4462F
32HFL5662D
32HFL5662H
32HFL5662L
37HFL4482F
37HFL5682D
37HFL5682L
42HFL4482F
42HFL5682D
42HFL5682H
42HFL5682L
Contents
1 Notice
Safety information and useful tips
Important Safety Instructions
OSS declaration
Cleaning and care
Environmental care
2 Your TV
Standalone installation and side controls
Guest remote control (optional)
Philips Hospitality setup remote control
(not included in box)
RC2573GR setup remote control
(not included in box)
3 Installation
Smart Installation
Install TV Channels
4 Home Screen
Watch TV
Smart Features
USB
TV Settings in Guest Menu
1
1
2
3
3
4
5
5
6
7
7
8
8
9
13
13
13
14
14
5 Option
16
6 Hotel Setting
17
Hotel and Room Information
Channel Map Setup
Guest TV Settings
PPV/VOD Options
Installer TV Settings
SmartClone
TV Upgrade
17
17
18
19
21
23
24
7 Overview of TV connectors and
controls
26
8 Glossary
28
1 Notice
Know these
Safety information and useful
tips
1. Two people are required to lift and carry a TV that weighs
more than 55 lb (25 kg). Improper handling of the TV can
cause serious injury.
2. If you place the TV set on a solid surface. Ensure the
surface is level and that it can withstand the weight of the
TV.
3. Installing the TV on the wall requires special skill that
should only be performed by a qualified personnel. You
should not attempt to do the work yourself. Philips bears
no responsibility for improper mounting or mounting that
results in accident or injury. Make sure that the wall mount
is being fixed securely enough so that it meets safety
standards.
4. This TV is compatible with the VESA wall mounting
standard. Please contact your local electronics supplier for
a VESA compliant bracket to wall mount this TV. Before
you mount your TV on a wall, ensure the wall is suitable to
carry the weight of the TV.
5. Do not insert the power plug in the wall socket before all
connections are made.
6. Do not touch any part of the TV, power lead, or aerial
lead during lightning storms.
7. Do not leave the TV in stand-by mode for an extended
period of time. Instead, disconnect the TV from the mains.
8. The TV set is always connected to the mains.
Disconnection of the TV set can be done by:
• unplugging the mains cord located at the back of TV
set, or
• unplugging the mains plug from the mains socket outlet.
safety symbols
This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock. For
the safety of everyone in your household, please do
not remove product covering.
The “exclamation point” calls attention to features for
which you should read the enclosed literature closely
to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be exposed to rain or
moisture and objects filled with liquids, such as vases, should
not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade
of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques,
introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
Healthcare TV models
(22HFL5662H, 26HFL5662H, 32HFL5662H,
42HFL5682H)
B Pull the power lead by the plug - do not pull by the wire.
Class 1 Warning
9. Ensure the power cord is fully inserted into the TV mains
socket and the wall socket.
10. If the TV is mounted on a swivel base or swivel arm,
ensure no strain is placed on the power cord when the
TV is swivelled. Strain on the power cord can loosen
connections and cause arcing or fire.
11. Verify that the mains supply voltage in your location
corresponds to the voltage printed on the sticker at the
rear of the TV.
12. The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
13. An all-pole MAINS SWITCH is used as the disconnect
device, the location on the apparatus and the function of
the switch shall be described, and the switch shall remain
readily operable.
WARNING
THIS TELEVISION IS CONSIDERED TO BE A DEVICE
WITH CLASS 1 CONSTRUCTION AND IT SHALL BE
CONNECTED TO A MAINS SOCKET OUTLET WITH A
PROTECTIVE EARTHING CONNECTION.
Pendant control Instruction manual Marking
CAUTION
INSTALLER: THIS PRODUCT IS NOT PROVIDED
WITH A PENDANT CONTROL; HOWEVER, IT IS
EXPECTED THAT THIS INSTITUTION (OR HOSPITAL)
WILL PROVIDE ONE FOR ATTACHMENT TO THE
APPROPRIATE RECEPTACLE ON THE PRODUCT.
AS PART OF THE INSTALLATION, EXAMINE THE
PENDANT CONTROL TO DETERMINE WHETHER A
MARKING SIMILAR TO THE ONE BELOW APPEARS
ON IT: ‘CAUTION – RISK OF FIRE IF USED IN OXYGEN
ENRICHED ATMOSPHERE – RETURN TO HOOK OR
HOLDER AFTER USE.’ IF THE ABOVE NOTICE IS NOT
PROVIDED ON THE PENDANT CONTROL, REMOVE
THE LABEL PROVIDED WITH THESE INSTRUCTIONS
AND ATTACH IT TO THE PENDANT CONTROL.
1
Important Safety Instructions
Read before operating equipment
17. Tilt / Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of its
cabinet design.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and / or personal injury.
18. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer. For use only
with VESA Wall Mount Bracket.
19. Power Lines - An outdoor antenna should be located away from power
lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected
to the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges. Section
810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides
information with respect to proper grounding of the mats and supporting
structure grounding of the lead-in wire to an antenna-discharge unit, size
of grounding connectors, location of antenna-discharge unit, connection to
grounding electrodes and requirements for the grounding electrode. See
Figure below.
21. Object and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through openings.
Warning: To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled with liquids,
such as vases should not be placed on this apparatus.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - alignment as marked on the
unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
• The batteries (batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
23. CAUTION -These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so.
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. This product may contain lead or mercury. Disposal of these materials may
be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic
Industries Alliance: www.eiae.org.
16. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
S3125A
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST
BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE (NEC)
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
(NEC SECTION 810-21)
GROUND CLAMPS
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.
2
Federal Communications Commission Notice
2010 © Koninklijke Philips Electronics N.V. All rights
reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V or their respective owners. Philips reserves
the right to change products at any time without being
obliged to adjust earlier supplies accordingly.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or
television technician for help.
The material in this manual is believed adequate for the
intended use of the system. If the product, or its individual
modules or procedures, are used for purposes other than
those specified herein, confirmation of their validity and
suitability must be obtained. Philips warrants that the
material itself does not infringe any United States patents. No
further warranty is expressed or implied.
Philips can’t be held responsible neither for any errors in the
content of this document nor for any problems as a result of
the content in this document.
Errors reported to Philips will be adapted and published on
the Philips support website as soon as possible.
Warranty
No components are user-serviceable. Do not open or
remove covers to the inside of the product.
Repairs may only be done by Philips Service Centers and
official repair shops. Failure to do so shall void any warranty,
stated or implied. Any operation expressly prohibited in
this manual, any adjustments, or assembly procedures not
recommended or authorised in this manual shall void the
warranty.
Modifications
The FCC requires the user to be notified that any changes
or modifications made to this device that are not expressly
approved by Philips Consumer Electronics may void the
user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded
cables with metallic RFI/EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Pixel characteristics
This LCD product has a high number of colour pixels.
Although it has effective pixels of 99.999% or more, black
dots or bright points of light (red, green or blue) may appear
constantly on the screen. This is a structural property of
the display (within common industry standards) and is not a
malfunction.
Canadian notice
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
OSS declaration
Open source software
This television contains open source software. Philips BU
Hospitality hereby offers to deliver or make available, upon
request, for a charge no more than the cost of physically
performing source distribution, a complete machine-readable
copy of the corresponding source code on a medium
customarily used for software interchange.
To obtain the source code, write to:
Cleaning and care
• Do not touch the screen with anything hard as this may
scratch, mark or damage the screen permanently.
• Do not rub with dust clothes containing chemical
treatment.
• Do not touch the surface with bare hands or a greasy
cloth (some cosmetics are harmful to the screen).
• Unplug the TV before cleaning the screen.
• When the surface becomes dusty, wipe gently with
absorbent cotton or other soft materials like chamois
soaks. Do not use acetone, toluene and alcohol
cleaners because they cause chemical damage.
• Do not use liquid or aerosol cleaners.
• Wipe off saliva or water droplets as soon as possible.
Long time contact with the screen causes deformations
and color fading.
Philips Singapore Pte Ltd.
Philips BU Hospitality
Software Development Manager
620A Lorong 1, Toa Payoh
Singapore 319762
This offer is valid for three years after the date of purchase of
this product.
3
Copyright
Screen care and sterilization
Avoid stationary images as much as possible. Stationary
images are images that remain on-screen for extended
periods of time. Examples include: on-screen menus, black
bars and time displays. If you must use stationary images,
reduce screen contrast and brightness to avoid screen
damage.
Unplug the TV before cleaning.
Use a damp (not wet) cloth with only non-aggressive cleaners
to wipe the TV. Use another damp (not wet) cloth to clean off
the cleaning agent residue from the surface of the TV.
Recommended cleaning agents include:
• Bleach solution (10:90 concentration of bleach to
water).
• Denatured alcohol (comprising of 80%-90% ethanol,
10%-20% methanol) Risk of damage to the TV screen!
Never touch, push, rub or strike the screen with any
object. To avoid deformations and color fading, wipe off
water drops as soon as possible.
VESA, FDMI and the VESA Mounting Compliant logo are
trademarks of the Video Electronics Standards Association.
Manufactured under licence from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Environmental care
Energy Star® qualified products and practices help you
save money and reduce Greenhouse gas emissions by
meeting strict energy efficiency guidelines set by the U.S.
Environmental Protection Agency and U.S. Department of
Energy.
• Your product is designed and manufactured with
high quality materials and components, which can be
recycled and reused.
• The packaging of this product is intended to be
recycled. Contact your local authorities for information
about how to recycle the packaging.
For product recycling information, please
visit- www.recycle.philips.com
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old product
helps to prevent potential negative consequences for
the environment and human health.
• Like all LCD products, this set contains a lamp with
mercury; please dispose of according to all local,
state and federal laws. Philips pays a lot of attention
to produce environment-friendly products in green
focal areas. Your new TV contains materials which
can be recycled and reused. At the end of its life,
specialized companies can dismantle the discarded TV
to concentrate the reusable materials and to minimize
the amount of materials to be disposed of. Please
ensure you dispose of your old TV according to local
regulations. Disposal of used batteries The batteries
supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may
not be disposed of with your household waste. Please
ensure you dispose of batteries according to local
regulations.
4
2 Your TV
• Press B Power on the setup remote control.
Standalone installation and
side controls
This section describes how to install the TV channels
automatically.
1. Connect the RF signal from the wall socket to the TV.
2. Plug the power cord into the power outlet.
• 2-pin power cord (for D/L models)
• 3-pin power cord (for H models)
A
B
C
D
E
F
G
RESET/UPGRADE
4. Press RC5 SETUP to display the setup menu.
Note
• The setup remote control is not included in the box.
Contact your Philips authorized agent or dealer to acquire
the setup remote control.
Setup remote control might differ from the illustration.
HDMI 1
TV ANTENNA
A
B
C
D
E
F
G
RESET/UPGRADE
GUIDE
RECALL/INFO
BACK/PP
Cable
HOME
MENU
OPTIONS
ALARM/CLOCK
SMART
TELETEXT
CC
MUTE
TV
VOL
3. Turn the TV on.
• Press B (POWER) at the side of the TV.
P
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
AV
SLEEP
RC5 GUEST RC5 SETUP RC6 GUEST RC6 SETUP
HOSPITALITY
5
Guest remote control
(optional)
1
2
a POWER: Press to turn on/off the TV from or to
23
22
21
20
standby mode.
b HOME: Toggles the main menu on or off.
c SOURCE: Selects connected devices.
d OPTIONS: Selects different options.
CC
SLEEP
SOURCE
OPTIONS
Æ/Δ
Ê
¢
∫
CLOCK
USB/MEDIA
19
e COLOR buttons: Selects tasks or options.
3
4
5
6
7
8
f Forward button: Fast forward feature.
g USB/MEDIA: Access the USB files or photos.
18
9
h OK: Confirm an entry or selection.
10
17
i Navigation buttons: Navigates through the menus.
SMART
GUIDE
j SMART FEATURES: Direct access to Smart
SMART
FEATURES
Features.
k Mute: Mute or restores audio output.
16
l Program +/-: Switches to the next or previous channel.
11
12
m 0-9 Numeric buttons: Selects a channel or setting.
n FORMAT: Launches the picture FORMAT menu.
o BACK: Going back to the previous menu.
13
p Volume +/-: Increases or decreases volume.
q SMART GUIDE: Direct access to SMART GUIDE
menu.
BACK
15
r CLOCK: Unused button.
s Backward button: Fast reverse feature.
t STOP: Stop button.
u PLAY/PAUSE: Select Play or Pause a picture.
v CC: Enables Closed Caption.
w SLEEP: Enable Sleeptimer feature.
6
FORMAT
14
RC2573GR setup remote
control (not included in box)
Philips Hospitality setup
remote control (not included
in box)
RC2573GR is an optional remote control. It is used for
Philips Commercial Solutions features and SmartCard
settings. It can be purchased separately.
a Slide this button up to enter into Guest mode or slide
this button down to enter into Setup mode.
b E button: It has the same function as OK button.
A
B
C
D
E
F
G
RESET/UPGRADE
GUIDE
RECALL/INFO
BACK/PP
HOME
MENU
ALARM/CLOCK
OPTIONS
SMART
1
TELETEXT
0
CC
MUTE
TV
VOL
P
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
AV
SLEEP
RC5 GUEST RC5 SETUP RC6 GUEST RC6 SETUP
2
HOSPITALITY
7
3 Installation
3. SmartInstall – Connection to Paid-Per-View System
Smart Installation
In the 1st time (Virgin) installation, the OSD will instruct you
step by step to do the TV installation setting.
• In the option, you can choose “Yes” or “No” to
Connected To PPV System.
1. Please Select Your Language
• Choose either the “No” option and press
to enter
the next step.
• Or for a PPV system installation, choose “Yes”.
The Screen Menu will request for selection of
Communication Type which includes SmatPort (select
No, SPI-5V, SPI-3V3) and Serial Express.
• Choose a language and press
proceed to the next step.
to select and
2. SmartInstall – Initial Wizard
4. SmartInstall – Standalone Proidiom selection
• In the option, you can choose either “Skip” or
“Continue” to continue the Smart Install.
• In the first time set up, choose “Continue” option and
press
to enter the next step
• In the option, you can choose “Yes” or “No” to Using
Standalone Pro:Idiom.
• In the first time set up, choose “No” option and press
to enter the next step.
After above setting is completed, you will enter the following
setting OSD.
8
Install TV Channels
■
This TV is equipped with Helptext which will time out in 10
sec or upon Remote Control key press.
■
Install TV Settings: This option allows you to Install
TV setting. For the “Install TV Settings” option, you
can do the setting for following options in sub-menu:
Install TV Channels: This option allows you to Install
TV channels. For the “Install TV Channels” option,
you can do the setting for following options in sub-menu:
• Select Your Power On Setting: “Last Status”, “On”,
“Standby”, “Forced On”
• When power to the TV is interrupted, this function
sets the state that the TV will return to when power is
restored.
• If set to Standby, the TV will always resume into
Standby mode when power is restored (default
setting).
• If set to Last Status, the TV will resume to the mode it
was in when power was lost.
• If set to On, the TV will always turn-on into On mode
when power is restored.
• If set to Forced On, the TV will turn-on to On mode,
but it cannot be turned off. (For applications where TV
is always on and you do not want anyone accidentally
turning it off.)
• Default setting is Standby.
• Scan Type: “Cable” to receive TV signals from a cable,
“Air” to receive TV signals from an antenna.
• Install TV Channels: “Auto”, “Manual”
• Confirmation page to “Start” the TV channels tuning.
• System Searching Status: “Digital Channels Found”,
“Analog Channels Found”
Note
It is important to understand the difference between
physical channel numbers and TV program numbers.
When Auto Install is selected, the TV first scans for
digital channels, starting at a physical (RF) channel 2 and
then increasing in frequency to 3, 4, .... The first digital
program it finds will be installed on TV program 1, the
second on TV program 2 etc. Then the TV scans for
analog channels. For the sake of discussion, let’s assume
that the TV found 36 digital programs. Then the first
analog channel found would be installed as TV program
37, the second as TV program 38 etc. This could be a
big change as most hybrid analog/digital systems have
the analog programs on the lower physical channels
and the digitals on the higher. But this is only the initial
order that the Auto Install creates - the final order of the
channel map that you wish to present to the guest is fully
programmable.
• Select Your Keyboard Lock Setting: “ No”, “Yes”, “All”.
• This function enables/disables the Keyboard buttons on
the TV.
• If set to No, all keys are enabled. If set to Yes, all keys
are locked except for the Power key. If set to All, then
all keys are locked including the Power key.
• Default setting is “No”.
9
• Select Your RC Lock Settings: “No”, “Yes”.
• This function enables/disables the processing of the
Guest remote control signals. Installer remote control
signals will still function regardless of the setting.
• Default setting is “No”.
■
• Using Smart Guide: “Yes”, “No”.
• If you choose yes, than you have the further ability to
enable/disable the available individual categories: High
Definition; Sports; News; Kids; Movies; Network; Adult/
Hospital*; Lifestyle; Other/Education*.
» Categories are Hospital and Education for
Healthcare TVs (“H” models) or Adult and Other
for Hospitality TVs (“D”, “L”, “F” models)
• Default setting is “No”.
Guest TV Settings: This option allows you to set the
Guest TV Settings”. For the “Guest TV Settings”
option, you can do the setting for following options in
sub-menu:
• Any CEC Communication: “Yes”, “No”
• This function enables/disables the HDMI-CEC
functionality available on this TV.
• Default setting is “No”.
• Select Your Closed Caption (CC) Settings: “Off ”,
“On”, “CC on Mute”. CC on Mute is the default and
recommended setting.
• Using Smart Secure: “Yes”, “No”.
• This function enables/disables the Smart Secure feature,
which will check for a special security ID on a specific
TV channel (when enabled). If the ID is found, the TV
will function. If the ID is not found, the TV will display
an error message and not function. This renders the TV
non-functional if the TV is removed from the property..
• Default setting is “No”.
• Select your Switch On Program Settings: “TV”, “AV”,
“CVI”, “Side AV”, “VGA”, “HDMI1”, “HDMI2”, “HDMI3”,
“Side HDMI”.
• Using Smart Update: “Yes”, “No”.
• This function enables/disables the Smart Update
feature of the TV. If set to Yes, then SmartUpdate will
automatically check for new TV upgrades at regular
intervals and upgrade the TV software accordingly. You
must select the channel # for the SmartUpdate data
(default 87) and the time to check for updates (default
4:00 am).
• Default setting is Yes.
10
• Any Local Information And / Or Advertising To Guest:
“Yes”, “No”.
Note
This TV has the capability to add a custom Hotel Logo
icon to the Home guest menu screen (replaces the
“PHILIPS” in the lower right corner). Then this icon
can be assigned to a channel where the property runs
informational or advertising programming. So when the
guest clicks on this icon, the TV will switch to the assigned
program. Similarly to the Welcome Logo, the Hotel Logo
must be in the png format, and have the name HotelLogo.
png and it must be on the USB drive in a folder named
BUH_Logos. The size of the picture must be Width
= 266 pixels and Height = 136 pixels. (Again, use of
transparent background can create interesting images!) A
smaller image can be used, but it should be centered in a
canvas of the size specified.
• Set Your Minimum (0), Maximum (100), And Switch On
(0-100) Volume.
• Default switch on volume = 12
• Any Welcome Message For Guest: “Yes”, “No”.
• Any Welcome Picture For Guest: “Yes”, “No”.
• Any AV Source To Block: “Yes”, “No”.
• Welcome Picture enables a customizable picture to
be shown at TV startup to welcome the guest, before
the TV switches to the channel or input source that is
defined in Switch On Program.
Note
The welcome picture must be in the png format, and
have the name WelcomeLogo.png and it must be on
the USB drive in a folder named BUH_Logos. The size
of the picture must be Width ≤ 940 pixels and Height ≤
540 pixels. (Use of transparent background can create
interesting images!)
• Select Your Multi RC Settings: “Off ”, “Blue”, “Yellow”,
“Green”, “Red”.
• Multi RC enables control of multiple TVs in a room
without any interference from each other’s remote
control.
• To enable MultiRC, each TV and its associated remote
control is set to one of the four colors – blue,
yellow, green, red. Each TV in the room is separately
programmed to a remote control of one of those
colors.
Set the TV to a particular RC:
» Use the set-up remote control and go to the PPV/
VOD options.
» Press ▼►to go to the Multi RC option.
11
■
» Press OK to select one of the four colors. The TV is
configured to respond to the RC that is set to the
same color.
» Press the color button (same color as above) on the
guest RC simultaneously to set to the selected color.
» Press OK for five seconds while pointing to the TV.
The TV displays the RC color and the TV color on
the screen. If they do not match, program the TV
and the RC again.
• In this way, each TV responds to only one RC that is set
to the same color of the TV itself.
Energy Saving Settings: This option allows you
to set the Energy Saving Features. For the “Energy
Saving Settings” option, you can do the setting for
following options in sub-menu:
• Select Your Standby Mode Settings: “Standard”, “Fast”.
• This feature enables the customization of the TV
standby behavior.
• Set to Standard, the TV will consume the least power
during standby, but startup time will be longer and
hospitality communication is not possible while the TV
is in standby mode.
• Set to Fast, the TV will be best performing in terms
of turn-on time and hospitality communication is also
available while in Standby, but power consumption will
be higher.
When above 4 settings are done, select “Done” and press
to confirm the “Smar t Install Finished” is OK.
• Select Your Smart Power Settings: “Off ”, “Low”,
“Medium”, “High”.
• This feature enables the customization of the power
consumption of the TV. Set to High, savings in power
consumption is typically around 50% as compared to
when set to Off at maximum backlight setting.
• Default setting is “Off ”.
• Set Your ESP Settings.
• This feature enables the customization of the duration
(in hours) in which TV will automatically turn off if
there is no user interaction via remote control or
keyboard. Setting this to 0 disables the function; this is
the default setting.
12
4 Home Screen
Press
key to go to the Home Screen.
• Smart Window: “Off ”, “HDMI1”, “HDMI2”, “HDMI3”,
Side HDMI”.
• This feature enables the display of Smart Window from
other sources other than the main programme being
view currently. You can choose to display the HDMI
display in the Smart Window and define the position of
Smart Window.
Watch TV
In this option, you can use the cursor to select category you
would like to see via OK key. This is the screen you see if
SmartGuide is enabled, otherwise you see
• Smart Audio: “Tuner”, “AV”, “CVI”, “Side AV”, “VGA”.
• SmartAudioSelect enables the audio from different
input sources connected to the TV to be selected while
maintaining the current TV picture.
• “High Definition”, “Sports”. “News”, “Kids”, “Movies”,
“Network”, “Adult/Hospital”, “Lifestyle”, “Other/
Education”.
Smart Features
Select this option, you can start to set the “Smart Feature”.
For the “Smart Features” option, you can do the setting
for following options in sub-menu:
• Smart Picture: “Soft”, “Natural”, “Personal”, “Rich”.
Enables list of Smart Features:
• Smart Guide
• Smart Window
• SmartAudioSelect (Split audio)
• Smart Picture
• Smart Sound
• Smart Sound: “Personal”, “Music”, “Voice”, “Theatre”.
13
USB
Using this option, you can select the files you want to play.
For the “USB” option, you can do the setting for following
options in sub-menu:
■
Source: Select input as “Tuner”, “AV”, “Side AV”, “CVI”,
“HDMI1”, “HDMI2”, “HDMI3”, “Side HDMI”, “VGA”
■
Picture format: “Auto”, “MovieExpand 16:9”,
“Superzoom”, “Widescreen”
• This feature allows to set the TV display to the
preferred picture format viewing mode.
■
Audio: Enables “Audio Language” selection for digital
channels, or enables ”SAP” (Second Audio Programme)
selection for analog channels.
• “Smart Audio Select” enables the audio from different
input sources connected to the TV to be selected while
maintaining the current TV picture.
• “Folders”, “music”, “picture”
TV Settings in Guest Menu
In this menu, the following settings are available.
■
■
Sets the Menu Language: “English”, “Spanish”, “French”
Sleeptimer: “OFF”, “15”, “30”, “45”, “60”, “90”, “120”,
“180”, “240”. The TV will turn off after the selected time
interval.
• CC Setup: “CC”— “Off ”, “On”, “CC on Mute”
• This feature allows the Closed Captions settings of this
TV to be customized. Any changes made in this section
will be reset to default values when the TV is turned
off.
• V-Chip Setup:
“US Movie Rating” – “G”, “PG”, “PG13”, “R”, “NC-17”,
“X”, “NR”
“US TV Rating” – “Lock All”, “Unlock All”, “Done”
Note
G: General Programming
PG: Parental Guidance
PG-13: Parental Strongly Cautioned if Under 13
R: Restricted. Accompanied By An Adult If under17
NC-17: No Children Under Age 17
X: Adults Only
NR: Not Rated
• “Analog CC Mode” – “CC1”, “CC2”, “CC3”, “CC4”,
“TEXT1”, “TEXT2”, “TEXT3”, “TEXT4”
• “Digital CC Mode” – “CS1”, “CS2”, “CS3”, “CS4”, “CS5”,
“CS6”
15
5 Option
OPTIONS
Press
key on the Guest Remote Control to enter the
Option Menu Setting:
■
Audio Language:
• Displays options (if available) SAP allows you to
select the Secondary Audio Program of the analog TV
channel (if available)
or
■
• Audio Language allows you to select from the audio
languages of the digital TV channel (if available)
Closed Captions:
• CC Setup:
» CC — “Off ”, “On”, “CC on Mute”
» Analog CC Mode – “CC1”, “CC2”, “CC3”, “CC4”,
“TEXT1”, “TEXT2”, “TEXT3”, “TEXT4”
» Digital CC Mode – “CS1”, “CS2”, “CS3”, “CS4”,
“CS5”, “CS6”
For normal operation, choose Analog CC Mode =
CC1 and Digital CC Mode = CS1
■
■
■
■
Picture format:
• “Auto”, “MovieExpand 16:9”, “Superzoom”,
“Widescreen”
Smart Window:
• “Off ”, “HDMI1”, “HDMI2”, “HDMI3”, Side HDMI”
Smart Audio Select:
• “Tuner”, “AV”, “Side AV”, “CVI”, “VGA”
What’s On
• Indicate the current TV info
16
6 Hotel Setting
■
Press M on the Setup Remote Control to display the Hotel
Setup Menu.
■
Hotel and Room Information
■
■
■
Select this option can set the hotel information to customer.
■ Hotel Name: Use the virtual keyboard to enter the
Hotel Name
■ Hotel Phone Number: Use the virtual keyboard to
enter the Hotel Phone Number
■ Room Number: Use the virtual keyboard to enter the
Room Number
■
MPEG Program Number: corresponds to Digital
Minor Channel.
• Press 0-9 (Number buttons) to enter a channel
number between 1 and 32768.
Rings: This option define which Ring is to be currently
used by the TV for Hotel guest viewing. The default is
Ring 1, and only those channels marked as valid Ring1
channels are accessible on the TV.
SmartGuide: This option allows selection of different
category option (High Definition, Sports, News, etc).
Label: This option assigns a (text) channel label to the
current TV channel. The channel label will be displayed
on the top of the screen during the changing of channels.
Mute: Mute allows you to customize the video and/or
audio muting of the current TV channel setup.
• Set to Audio, the current TV channel will be audio
muted.
• Set to Video, the current TV channel will be video
blanked.
Auto Install: “Start”
Note
It is important to understand the difference between
physical channel numbers and TV program numbers.
When Auto Install is selected, the TV first scans for
digital channels, starting at a physical (RF) channel 2 and
then increasing in frequency to 3, 4, .... The first digital
program it finds will be installed on TV program 1, the
second on TV program 2 etc. Then the TV scans for
analog channels. For the sake of discussion, let’s assume
that the TV found 36 digital programs. Then the first
analog channel found would be installed as TV program
37, the second as TV program 38 etc. This could be a
big change as most hybrid analog/digital systems have
the analog programs on the lower physical channels
and the digitals on the higher. But this is only the initial
order that the Auto Install creates - the final order of the
channel map that you wish to present to the guest is fully
programmable.
Channel Map Setup
Current Channel Setup:
■ Channel: Press 0-9 (Number buttons) to enter a
program number.
• For cable mode, select a number between 01-250.
• For antenna mode, select a number between 02-250.
■ Input: selection of input source. External input can also
be assigned to a program number.
■ Channel Logo: Press ► to enter a page containing
logos, press ▲▼ to select a logo for the channel. Press E
button on the set-up remote control to save the logo.
■ Digital: Press Yes to select the digital channel.
■ RF Channel Number: corresponds to Digital Major
Channel:
• Press 0-9 (Number buttons) to enter a channel
number between 1 and 999.
■
17
Cable Tuning: “Yes”, “No”
■
Current Ring: “Ring1”, “Ring2”, “Ring3”, “Ring4”. Only
those channels assigned to the “Current Ring” will be
available to the guest.
■
Switch On Options are:
• Hotel Logo: This option allows the TV to display a
customized logo on the Home Menu of TV,
• Welcome Picture: This option enables a
customizable picture to be shown at TV startup to
welcome the guest, before the TV switches to the
channel or input source that is defined in Switch On
Program.
• Welcome Message: This option enables a
customizable welcome text message (of 2 lines
maximum, 20 characters per line) to be shown to the
guest at TV startup.
• Switch On Program: This option allows you to set
a channel or input source which you want the TV to
always tune to at TV startup.
• Switch On Volume: This option allows you to set
the volume setting to be heard by the guest at TV
startup.
• Channel Display: This option allows you to set the
On Screen Display to include numbers only, labels only,
numbers and labels, or none to be displayed.
■
Volume Setting:
• Volume Indicator: This option enables/disables the
display of the Volume Bar indicator when the Volume of
the TV is adjusted.
• Min Volume: This option sets the minimum volume
level of the TV which the guest can adjust to. The
minimum volume must always be less than or equal to
the maximum volume.
• Max Volume: This option sets the maximum volume
level of the TV which the guest can adjust to. The
maximum volume must always be greater than or equal
to the minimum volume.
Note
Channels can be assigned to more than one ring.
Guest TV Settings
■
■
Home Menu Options are : “Smart Features Menu Item”,
“Media Player Menu Item”, “TV Settings Menu Item”,
“Logo Menu Item”
Guest Menu Options are (selecting Yes/No for these
items adds or removes their icons from the guest Home
screen menu): “Language Menu Item”, “Source Menu
Item”, “Sleep Timer Menu Item”, “Closed Captions Menu
Item”, “Picture Format Menu Item”, “V-Chip Menu Item”
18
■
■
Selectable AV (selecting Yes/No for these items adds or
removes them from the list of available sources when
the guest presses the Source button on the remote
control.): “AV”, “CVI”, “Side AV”, “VGA”, “HDMI1”,
“HDMI2”, “HDMI3”, “Side HDMI”
■
V-Chip Setup: “Saved V-Chip”, “Clear All Rating”, “US
Movie Rating”, “US TV Rating”
Save V-Chip allows you to set if the V-Chip settings
adjustment perform by guest shall be saved permanently
or temporarily. If Yes, the V-Chip settings adjustment
done shall be saved permanently.
PPV/VOD Options
■
■
■
■
■
■
Auto Sensing: “Side AV”, “VGA”, “Side HDMI”, “USB”
This function allows you to enable/disable the auto
sensing feature of the side input sources based on video
or audio.
Default setting is set to “Yes”.
CC Setup: “Save CC”, “CC”, “Analog CC Mode”, “Digital
CC Mode”, “Digital CC Setup”
Save CC allows you to set if the CC settings adjustment
perform by guest shall be saved permanently or
temporarily. If Yes, the CC settings adjustment done shall
be saved permanently.
CC sets the default Closed Caption selection in the
Guest Menu, and the default CC mode at TV turn-on.
19
■
■
SmartPort: “SPI-3V3”, “SPI-5V”, “No”
This function sets the voltage levels used for the
SmartPort communication via the DATA1 connector of
the TV. Selecting No disables the communications.
■
■
SerialXpress: “Yes”, “No”
This feature enables/disables the Serial Express
communication via the RS232 connector of the TV.
■ Set the TV to a particular RC:
1. Use the set-up remote control to enter the PPV/VOD
and Multi RCoption menu,
2. Press ▼▲ to select the one of the four colors,
3. Press OK button on setup remote control to store the
setting.
■ Enable standalone mode (Decryption control)
The premium HD content received by a satellite or cable is
encrypted using a digital rights management system (DRM)
called Pro Idiom® to avoid piracy. The technology is
embedded in the TV and prevents guests from pirating the
content.
■
■
■
■
MultiRC: “Off”, “Blue”, “Yellow”, “Green”, “Red”
This function enables control of multiple TVs in a room
without any interference from each other’s remote
control.
To enable Multi RC, each remote control is set to one of
the four colors – blue, green, yellow or red. Each TV in
the room is separately programmed to a remote control
of one of those colors.
In this way, each TV responds to only one RC that is
set to the same color as the TV itself. This prevents
interference from each other’s remote control when you
watch multiple TVs in a room.
■
Note
■
Multi RC supports a maximum of four TVs in one room.
20
Decryption Control: “Model #”, “Serial #”, “Current
Mode”, “New Mode”, “Password”, “Convert”, “Store”
This function enables TV conversion between a
Connected Pro:Idiom system and StandAlone Pro:Idiom
system. The conversion mechanism is via a 9 digit
keycode obtained from your Philips representative.
• Enter the Philips Hospitality setup menu,
• Enter the PPV/VOD options and go into the
Decryption Control Menu,
• Key in the TV model and serial number,
• Set the current mode to Standalone via pressing of OK
button,
• Enter the 9 digit Passwod obtained,
• Go to Convert option to decrypt the encrypted digital
signal received from a satellite or Pay-Per-View service.
Installer TV Settings
Note
• Default HDMI 1, 2, 3 Audio enables the customization of
the default audio path of the HDMI1, 2, 3 input source.
VGA can be selected if HDMI1, 2, 3 is dedicated for PC
input where the audio input is via the PC audio in.
• Bathroom speaker volume allows you to configure the
volume behavior of the bathroom speaker output. If set to
Variable, the bathroom speaker volume will be identical to
the TV loudspeaker volume. If set to Fixed, the bathroom
speaker volume will be fixed at a constant level output..
This section allows the Installer to customize the TV
performance and general settings.
■
Language: “English”, “Spanish”, “French”
■
■
■
Picture: This feature allows the installer to customize
the Picture setting of the TV set. Options are “Smart
Picture”, “Brightness”, “Colour”, “Contrast”, Sharpness”,
“Tint”, “Active Control”, “Backlight control”, “Colour
Temp”.
■
■
■
■
Audio: This feature allows the installer to customize
the audio settings of the TV set. Options are: “Smart
Sound”, “Equalizer”, “Balance”, “AVL”, “Default HDMI1
Audio”, “Default HDMI2 Audio”, “Default HDMI3
Audio”, “Loud Speaker Mute”, “Bathroom Speaker
Volume”.
21
Security Options - This section allows the Installer to
customize the Security settings of the TV.
There are : “Security”, “Keyboard Lock”, Remote
Control Lock”, “SmartSecure”
Security - This function sets the Security access level of
the TV Setup Menu. If set to High, access to the Setup
menu is via the Installer Remote Control only. If set to
Standard, access to the Setup Menu is via the Installer
Remote Control, or via a keycode sequence on the
normal Guest Remote Control.
Keyboard Lock - This function enables/disables the
Keyboard buttons on the TV. If set to No, all keys are
enabled. If set to Yes, all keys are locked except for the
Power key. If set to All, then all keys are locked including
the Power key.
Remote Control Lock - This function enables/disables
the processing of the Guest remote control signals.
Installer remote control signals will still function
regardless of the setting.
Smart Secure - This function enables/disables the
SmartSecure feature, which will check for a special
security ID on a specific TV channel (when enabled).
If the ID is found, the TV will function. If the ID is not
found, the TV will display an error message and not
function. This functionality requires an external device
(PSG) to be installed in the property head end. Contact
you Philips sales associate if this functionality is required.
■
■
■
■
■
■
■
■
■
■
Control: “Digit Timeout”, “3-Digit Entry”, “Step Tuning”,
“HDMI-CEC”
This section allows the Installer to customizes the
Control and Performance settings of the TV.
Digit Timeout - This function enables the setting of the
timeout (in seconds) between digit key presses during
TV channel changing. It is advisable not to specify too
short a time period especially when you want to key in 2
or 3 digit channel numbers. Recommended and default
setting is 3.0 seconds
3-Digit Entry - This function enables/disables 3-digit
entries during TV channel changing.
Step Tuning - This function enables/disables channel
tuning at each digit key press. Set to Yes, each digit key
press will perform a channel tuning instead of waiting for
the entire 2 or 3 digits to be entered completely.
HDMI-CEC - This function enables/disables the end user
CEC functionality available on this TV.
Energy Saving Features: “Smart Power”, “Auto Sense”,
“ESP”, “Standby Mode”
Smart Power – This feature enables the customization of
the power consumption of the TV. Set to High, savings in
power consumption is typically around 50% as compared
to when set to Off in maximum backlight setting.
Auto Sense - This feature will enable/disable the
Light sensor of the TV. If enabled, the ambient light
conditions of the room will be measured to automatically
configure the optimum power consumption and picture
performance of the TV, according to the room ambience
conditions.
ESP - This feature enables the customization of the
duration (in hours) after which TV will automatically turn
off if there is no user interaction via remote control or
keyboard. Set to 0 = disabled.
22
■
Standby Mode - This feature enables the customization
of the TV standby behavior. Set to Standard, the TV will
consume the least power during standby, but startup
time will be longer and hospitality communication is not
possible. Set to Fast, the TV will be best performing in
terms of turn-on time and hospitality communication is
also available, but power consumption will be higher.
■
Customizable UI feature: “Background Color Theme”,
“Background Design Theme”
• This function enables the customization of the TV’s
Graphical User Interface via selection of colors and
themes.
• Background Color Theme - This feature enables the
customization of the background color of the menus,
to create a common brand recognition with the hotel
property.
• Background Design Theme - This feature enables
customized background designs to be included and
used as the background for User Interface menus. Like
the Welcome Logo and the Hotel Logo, these also
need to be in the png format. A transparency of <
65% is recommended. For the images and sizes see
appendix A.
■
Programmable UI feature : This feature is available to
those with advanced Flash(R) Lite(R) programming
capabilities.
■
Power On: “Last Status”, “On”, “Standby”, “Forced On”.
Default setting is “Standby”. When power to the TV is
interrupted, this function sets the state that the TV will
return to when power is restored.
• If set to Standby, the TV will always resume into
Standby mode when power is restored (default
setting).
• If set to Last Status, the TV will resume to the mode it
was in when power was lost.
• If set to On, the TV will always turn-on into On mode
when power is restored...
• If set to Forced On, the TV will turn-on to On mode,
but it cannot be turned off. (for applications where TV
is always on and you do not want anyone accidentally
turning it off.)
■
Clock Setup
• This feature allows the entering of TV channel number
that will provide the date and clock information. This
must be a digital channel containing an STT table
(almost all digital channels do.)
■
Factory Default will reset the factory out-of-box settings.
Warning
• There is no confirmation request - if you press right arrow
here, all programming is immediately and irrevocably reset
to default values.
■
SmartClone
SmartGuide Category: “SmartGuide”, “High Definition”,
“Sports”, “News”, “Kids”, Movies”, Network”, “Adult/
Hospital”, “Lifestyle”, “Other/Education”
• If you choose yes, than you have the further ability to
enable/disable the available individual categories: High
Definition; Sports; News; Kids; Movies; Network; Adult/
Hospital*; Lifestyle; Other/Education*
* Categories are Hospital and Education for Healthcare
TVs (“H” models) or Adult and Other for Hospitality
TVs (“D”, “L”, “F” models)
• Default setting is “No”
This section enables the cloning of TV settings via USB, RF.
■
23
Source: “RF”, “USB” – This function selects the Source
from which the Clone data will be received. To receive
data over RF requires an additional piece of equipment
(PSG) installed in the property head end to transmit the
data to the TVs. Contact your Philips sales associate for
more information.
TV Upgrade
This section enables the upgrading of the TV software
via USB or RF. It also allows the configuration of the
SmartUpdate feature to enable the TV to be automatically
upgraded.
■
■
■
RF Channel Number: This function selects the RF
channel number where the TV can find the clone data.
Note that both the PSG must be set to broadcast on the
same channel that the TV must be set to receive.
■
Source: “RF”, “USB” – This function Select the Source
from which the TV Upgrade data will be received. Like
the SmartClone function, the RF option requires a PSG
installed in the property head end to broadcast the data
to the TVs. For more information, contact your Philips
sales representative.
■
Direction: “USB To TV”, “TV to USB”
■
RF Channel Number
Source to TV: This function will initiate the cloning
process of data from the selected source to the TV.
TV to USB : This function will clone the data from the
TV to a USB device.
24
■
■
■
■
Upgrade Type: “All”, ”Software Upgrade Package”,
“Software Asset Package”
This section Select the type of software to be upgraded
to the TV.
• If set to ALL, then all software types (Software Upgrade
Package and Software Asset Package) will be upgraded
automatically.
• If set to Software Upgrade Package, there is an option
to selectively upgrade individual software components
such as main software, standby software and back-end
software.
• If set to Software Asset Package, there is an option
to selectively upgrade individual software assets
such as Hotel Logo, Channel Logo, Welcome Logo,
Customizable UI, Programmable UI and SmartModule
Clone Data.
■
SmartUpdate: “Yes”, “No” - This function enables/
disables the SmartUpdate feature of the TV. If set to Yes,
then SmartUpdate will automatically check for new TV
upgrades daily, at the time specified in the SmartUpdate
Schedule step below, and upgrade the TV software
and/or clone data if newer versions are found. Like all
previous RF download functions, this too requires a PSG
to be installed in the property head end.
■
SmartUpdate RF Channel: This function selects the
RF channel number where the TV will search for
SmartUpdate data (if SmartUpdate is enabled).
■
SmartUpdate Schedule : This function allows Entering
the time of the day when the TV will search for
SmartUpdate data (if SmartUpdate is enabled).
SW Version Check: “Yes”, “No” - If set to Yes, this
feature causes the TV to perform a version check of
the TV upgrade software to ensure that only a newer
version will be installed.
Start - This function will initiate the TV upgrading
process.
25
7 Overview of TV connectors and controls
L/D/H model
VIDEO
IN
s
AUDIO
IN
R
a
g
L
b
h
i
VGA IN
c
PC-AUDIO
IN
j
d
k
USB
DATA 1
e
HDMI 3
HDMI 2
HDMI 1
f
SIDE HDMI
DATA 1
HDMI 3
rq
p on
HDMI 2
HDMI 1
m
a VIDEO IN
m HDMI 1 / HDMI 2 / HDMI 3
b AUDIO IN L/R
n PENDANT CONTROL OUT
c VGA IN
o AUDIO OUT 8Ω
d PC-AUDIO IN
p RS232 (Service Port)
e USB
q Future Use
f SIDE HDMI
r Game Port (Available on selected
models only)
g AUDIO OUT L/R
s TV 75Ω
h VIDEO IN
i AUDIO IN L/R
j CVI (YPbPr and AUDIO L/R)
k Data 1
l SPDIF OUT
26
l
F models
VIDEO
IN
l
AUDIO
IN
R
a
VGA IN
L
b
c
PC-AUDIO
IN
g
d
h
USB
DATA 1
e
HDMI 3
HDMI 2
HDMI 1
f
SIDE HDMI
DATA 1
HDMI 1
k
a VIDEO IN
b AUDIO IN L/R
c VGA IN
d PC-AUDIO IN
e USB
f SIDE HDMI
g CVI (YPbPr and AUDIO L/R)
h Data 1
i SPDIF OUT
j HDMI 1
k RS232 (Service Port)
l TV 75Ω
27
j
i
8 Glossary
Aspect Ratio
Audio Video (A/V)
CVBS
Component Video Input
(Y Pb Pr)
HDTV
PPV
The ratio between the width and height of the TV picture on the screen. An old analog TV has an
aspect ratio of 4 to 3 (4:3). The new aspect ratio for HDTV is 16:9 which is closer to the aspect ratio
in a movie theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can
automatically switch between them.
A term often used when discussing a connections on a TV receiver or on video equipment, which has
been especially designed to accept VCR or DVD audio-video signals.
Composite Video Baseband Signal. In broadcast television this refers to the video signal, including the
colour information and syncs. This is the yellow connector in an A/V input.
Component Video Input is a type of connection that uses RCA-type connectors to allow set top boxes
or analog DVD players to connect a signal to the TV. By offering the RCA-type input (YPbPr) analog
High Definition signals can be connected from a set top box directly into the TV allowing for the signal
to display on the screen.
The generally agreed upon definition of HDTV is approximately twice the vertical and horizontal
picture resolution of the old analog TV, which essentially makes the picture twice as sharp. HDTV
also has a screen ratio of 16:9 as compared with the old TV screens, which have a screen ratio of 4:3.
HDTV offers reduced motion artifacts (i.e. ghosting, dot crawl).
Pay Per View
Resolution: A measurement of the finest (smallest) detail that is visible in a video image. TV Resolutions
may be expressed as number of pixels in an image; or more commonly, As Total Number of
(horizontally scanned) Lines used to create the image.
Standard Digital TV Resolutions:
Resolution
SPDIF
SDTV: 480i –The picture is 720x480 pixels,
480p – The picture is the same 720x480 pixels, but non-interlaced.
HDTV: 720p – The picture is 1280x720 pixels non-interlaced, |
1080i – The picture is 1920x 1080 pixels interlaced.
1080p – The picture is 1920x 1080 pixels non-interlaced.
SPDIF (Sony and Philips Digital Interconnect Format) is the high quality digital audio output from the
TV. Use this to connect the TV sound to a home theater audio system.
28
29
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.