ENGLISH
OWNER'S MANUAL
DVB-T HDD/DVD RECORDER
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
RH698H
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book
case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings
shall be never be blocked by placing the product on a bed, sofa, rug or other
similar surface. This product shall not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or the manufacturer's
instruction has been adhered to.
CAUTION: This product employs a Laser System.To ensure proper use of this
product, please read this owner's manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
2
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue
use of the appliance, and have the cord replaced with an exact replacement
part by an authorized service centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance. To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure that the plug is easily
accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the environment and bring on
possible threat to human and animal health, the old battery or the battery put it
in the appropriate container at designated collection points. Do not dispose of
batteries or battery together with other waste. It is recommended that you use
local, free reimbursement systems batteries and accumulators. The battery shall
not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 3
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled bin symbol is attached to
batteries/accumulators of Your product it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with chemical symbols for
mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more
that 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.
3. All batteries/accumulators should be disposed separately from the
municipal waste stream via designated collection facilities appointed
by the government or the local authorities.
4. The correct disposal of Your old batteries/ accumulators will help to
prevent potential negative consequences for the environment, animal
and human health.
5. For more detailed information about disposal of Your old batteries/
accumulators, please contact Your city offi ce, waste disposal service
or the shop where You purchased the product.
LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of
Directive 2004/108/EC, 2006/95/EC and 2009/125/EC.
Copyrights
Recording equipment should be used only for lawful copying and you are
advised to check carefully what is lawful copying in the area in which you are
making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner.
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by
Rovi Corporation. Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 625p UNIT PLEASE CONTACT OUR
CUSTOMER SERVICE CENTRE.
Manufactured under license from Dolby Laboratories. Dolby and the doubleD symbol are trademarks of Dolby Laboratories.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
Open source software notice
This product includes
Freetype library : copyright © 2003 The FreeType Project (www.freetype.org).
Zlib compression library developed by Jean-loup Gailly and Mark Adler.
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
Doubly Linked List licensed by Artistic license.
You can download this software from http://freshmeat.net/projects/linklist/
European Standards Centre:
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
Please note that this is NOT a Customer Service contact point. For Customer
Service Information, see Warranty Card or contact the dealer that you purchased this product.
3
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 4
Contents
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-14
Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . .14
Auto setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
Adjust the SETUP settings . . . . . . . . . . . . . . . . . . . . . . .17-21
Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . .22-23
Using the digital EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-26
Playing DivX® movie files . . . . . . . . . . . . . . . . . . . . . . . . .27-28
Listening to a music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31-33
Editing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-36
Dubbing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-40
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
4
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 5
Before you start
Recordable and Playable discs
This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.
Symbol used in
this manual
HDD
DVD-R
HDD
-R
Yes
No
–
Yes
DVD-RW
DVD-RAM
DVD+R
RAM
+R
+R
+RW
Yes
Yes
No
No
Yes
Video mode
Video mode
VR mode
Auto
Auto
Auto
Limited
Yes
Yes
Limited
Limited
Yes
-RWVR
-RWVideo
DVD+R(DL)
DVD+RW
Logos
Re-Writable
Formatting Mode
(new discs)
Editing
Play on other
players
Recommended
discs
–
The player must compatible with corresponding media and the media has to be finalized.
Mitsubishi(8x,16x)
Verbatim(8x,16x)
–
Mitsubishi(4x)
Verbatim(4x)
JVC(4x)
Maxell(4x)
Mitsubishi(3x) Mitsubishi(8, 16x) Mitsubishi(2.4x, 8x) Mitsubishi(4x)
Maxell(5x)
Verbatim(8x,16x)
HP(4x)
Verbatim(4x)
Ricoh(4x)
Playable discs
The table below shows the file formats and media types that this unit can playback.
Symbol used in
this manual
DVD
Audio CD
DVD
ACD
Discs such as movies
that can be
purchased or rented.
Music CDs or CD-R/RWs
in music CD format that
can be purchased
Data disc (DivX, JPEG, MP3 or WMA)
DivX
JPEG
MP3
WMA
Logos
Characteristics
Discs that contain DivX, JPEG, MP3 or WMA
files.
5
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 6
Notes on discs
Restrictions on copying
Depending on the conditions of the recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Some video material is copy-once protected: Such material cannot be copied to
HDD or DVD. You can identify copy-once protected material during playback by
displaying disc information on-screen.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
NTSC format signals from the analog or the DV inputs is not recorded correctly with this unit.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing
so may result in malfunctions.
Video signals in SECAM format (from the built-in TV tuner or from the analog inputs) are recorded in PAL format.
Depending on the recording software & the finalization, some recorded discs
(CD-R/RW or DVD±R/RW) may not be playable.
About the
Symbol Display
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal
computer or a DVD or CD Recorder may not play if the disc is damaged or
dirty, or if there is dirt or condensation on the Unit’s lens.
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific media.
If you record a disc using a personal computer, even if it is recorded in a
compatible format, there are cases in which it may not play because of the
settings of the application software used to create the disc. (Check with the
software publisher for more detailed information.)
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
This unit requires discs and recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right to
grant such permission. Permission should always be sought from the copyright owner.
Availability of copying or moving feature
From
To
MP3/WMA
HDD
DISC
-
DISC
HDD
Yes
USB drive
HDD
Yes
Yes
*1 The title is recorded from this unit.
6
JPEG
DivX
Title*1
-
-
Yes
Yes
Yes
Yes
Yes
-
Regional Codes
Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code. Can’t play back” appears on the TV screen.
Remote Control Operation
Point the Remote Control at the remote sensor and press the buttons.
Remote Control Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert R03
(size AAA) battery with 3 and # matched correctly.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 7
Remote control
a
DVD: Selects the unit’s mode to DVD.
a
PR LIST: Displays the program list menu.
HDD: Selects the unit’s mode to HDD.
OPEN/CLOSE: Opens and closes the disc tray.
REC(z): Starts recording. Press repeatedly to set the
recording time.
c
b
SKIP (. / >): Go to next or previous chapter/track/file.
PAUSE/STEP (X): Pause playback or recording temporarily.
PLAY (N): Starts playback.
d
c
d
TEXT: Switches between teletext mode and normal TV
viewing.
): Selects an audio language or audio channel.
TITLE: Displays the disc’s Title menu, if available.
MARKER: Selects multiple files/titles on the list.
CLEAR: Removes a track number on the Program List.
TIMESHIFT: Activates pause live TV/playback (timeshift) for
a live TV program.
STOP (x): Stops playback or recording.
SUBTITLE: Selects a subtitle language.
AUDIO (
SCAN (m / M): Search backward or forward.
REPEAT: Repeat sequence, chapter, track, title, all.
TV Control Buttons: You can control the sound level, input
source, and power switch of your TV.
FAV: Displays the favorite program list.
AV/INPUT: Changes the input source (Tuner, AV1-3, or
DV IN).
Color buttons: Use when an EPG screen is displayed or
when tuned to a teletext program of a digital broadcast. The
function of each button will be described on-screen, and
changes depending on the screen being displayed.
0-9 numerical buttons: Selects numbered options in a
menu.
b
EPG: Displays the EPG menu.
PR+/PR-: Scans up or down through memorized
channels.
POWER: Switches the unit ON or OFF.
HOME: Accesses or removes the HOME menu.
TV/DVD: Press to switch between ‘TV mode’, in which you
get the picture and sound from the TV’s tuner, and ‘DVD
mode’, in which you get picture and sound from this unit.
MENU/LIST: Accesses menu on a DVD disc. Switches
between Title List-Original and Title List-Playlist menu.
b / B / v / V (left/right/up/down):
Used to navigate on-screen displays.
(ENTER): Acknowledges menu selection or displays the
program list.
RETURN (O): Removes the on-screen displays.
DISPLAY: Accesses On-Screen Display.
7
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 8
Main Unit
a
b
c
d
e
f
k
a 1 / I (POWER button)
Switches the unit ON or OFF.
b Disc Tray
Insert a disc here.
c DVD
Set the recorder’s mode to DVD.
HDD
Set the recorder’s mode to HDD.
v / V: Scans up or down through memorized
channels.
d Remote Sensor
Point the remote control here.
e Display window
Shows the current status of the unit.
T/S: Indicates the timeshift mode.
REC: The unit is recording.
HDD: The unit is in HDD mode.
DVD: The unit is in DVD mode.
HDD b B DVD: The unit is dubbing.
8
: Indicates when the unit is in timer recording or a timer recording is programmed.
: Indicates clock, total playing time,
elapsed time, title number, chapter/track number, channel, etc.
f N / X (PLAY / PAUSE)
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
g x (STOP)
Stops playback or recording.
h z (REC)
Starts recording. Press repeatedly to set the
recording time.
i OPEN/CLOSE (Z)
Opens or closes the disc tray.
j RESOLUTION
Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.
- HDMI: 576i, 576p, 720p, 1080i, 1080p
- COMPONENT: 576i, 576p
l
g
h i j
m
k USB Port
Connect an USB Flash memory.
l DV IN
Connect the DV output of a digital camcorder.
m AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 9
Hooking up the unit
a Antenna connection
Connect the Terrestrial
TV antenna to the
ANTENNA IN jack on
the unit.
If you want to use an
indoor antenna, use one
with a signal amplifier
rated at 5V, 100mA and
set [Antenna Feed 5V]
to [ON] in the setup
menu.
b Antenna connection to
your TV
Connect one end of the RF
cable to ANTENNA OUT jack
on the unit and other end to
ANTENNA IN jack on your
TV.
Passes the signal from the
ANTENNA IN jack to your
TV/monitor.
Antenna
(Digital)
and/or
Antenna
(Analog)
c SCART connection
Connect one end of the scart
cable into the AV1 SCART
jack on the unit and other
end to the corresponding in
jack on your TV.
You can get Audio and Video
signals together with this
connection.
d Power cord connection
Connect the mains lead to
the AC IN terminal on the
unit. Then plug the power
cord into the mains.
9
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 10
Hooking up the unit - more you can do
General about connection
Picture and sound
Digital TV is a transmission technology that replaces the traditional analogue
technique.
This means that several TV channels, radio channels and other digital services
can be transmitted on the same space as just one channel took up before. As a
consumer you get access to many more channels and services than before at
the same time as they are received with perfect picture and audio quality.
The recorder converts the digital signal into a format that is suitable for your TV
and sound system.
Connecting your recorder is just as simple as connecting for example a video
recorder. You get the best picture quality by using a HDMI cable for connection
to your TV-set. The best audio experience is obtained by connecting an optical
cable to your sound system.
Component connection
Connect one end of the component(Y PB PR) cable to the COMPONENT OUTPUT jack on the unit and other end to the COMPONENT INPUT jack on your
TV.
Connect one ends of the audio cables (red and white) to the analog AUDIO
OUTPUT jack on the unit and other ends to the AUDIO INPUT jack on your TV.
Coverage
Before buying this product it is anticipated that you have made sure that there
are digital transmissions covering your region.
Antenna / Signal source
Depending on the reception your recorder may be connected to a simple indoor
antenna or to an existing outdoor antenna system. If you live in a flat you should
make sure that the digital terrestrial signals are distributed to your wall antenna
outlet. If you have your own antenna system you must make sure that it is
equipped with antennas, filter and/or amplifier that can handle those frequencies that the digital channels are transmitted on.
Cable-TV
Please observe that this recorder is not designed for the reception of regular
digital cable-TV signals (QAM-signal). Despite this, operators of smaller cable
networks may have chosen to distribute the digital terrestrial signals (COFDMsignal) in the network. In this case this recorder may well be used.
Check with your landlord if you are insecure about what type of TV-signal that is
provided in the wall antenna outlet.
10
If your television is a high-definition or “digital ready” television, you may take
advantage of the unit’s progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive Scan format, the picture
will appear scrambled with the progressive signal.
Set the resolution to 576p using RES. button on the front panel to obtain the
progressive signal.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 11
S-Video connection
Digital audio connection
Connect one end of the S-Video cable to the S-VIDEO OUTPUT jack on the
unit and the other end to the S-Video INPUT jack on your TV.
Connect one ends of the audio cables (red and white) to the analog AUDIO
OUTPUT jack on the unit and the other ends to the AUDIO INPUT jack on your
TV.
Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other
equipment with a digital input.
Connect one end of the digital audio cables (COAXIAL or OPTICAL) to the digital audio output jack (COAXIAL or OPTICAL) on the unit and other end to the
digital audio input jack (COAXIAL or OPTICAL) on your amplifier.
This recorder does not perform internal (2 channel) decoding of a DTS sound
track. To enjoy DTS multi channel surround, you must connect this recorder to a
DTS compatible receiver via one of this recorder’s digital audio outputs.
11
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 12
HDMI connection
If your TV is not equipped with DTS decoder, set the [DTS] options to
[OFF] on the setup menu (See page 19). To enjoy DTS multi channel
surround, you must connect this unit to a DTS compatible receiver via
one of this unit’s digital audio outputs.
If there is noise or lines on the screen, please check the HDMI cable.
Changing the resolution when the unit is connected with HDMI connector
may result in malfunctions. To solve the problem, turn off the unit and
then turn it on again.
When you connect an HDMI or DVI compatible device make sure of the
followings:
- Try switching off the HDMI/DVI device and this unit. Next, switch on
the HDMI/DVI device and leave it for around 30 seconds, then switch
on this unit.
Connect one end of the HDMI cable to the HDMI OUTPUT jack on the unit and
other end to the HDMI INPUT jack on your TV.
Recorder
TV
When you use the HDMI connection, you can change the resolution (576i,
576p, 720p,1080i or 1080p) for the HDMI output by pressing RES. button
repeatedly.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720(1440)x576i, 720x576p,
1280x720p, 1920x1080i or 1920x1080p video input.
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a
single digital connection for use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of HDCP (High-bandwidth
Digital Contents Protection). HDCP is used to protect digital content transmitted
and received.
HDMI has the capability to support standard, enhanced, or high-definition video
plus standard to multi-channel surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one
connector (instead of several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
Note on HDMI connection
12
If your TV is NOT capable of handling 96 kHz sampling frequency, set
the [Sampling Freq.] option to [48 kHz] on the setup menu (See page
19). When this choice is made, this unit will automatically convert any 96
kHz signals to 48 kHz so your system can decode them.
If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See
page 19).
Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
What is SIMPLINK?
Some functions of this unit are controlled by TV’s remote control when this
unit and LG TV with SIMPLINK are connected through HDMI connection.
•
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip,
Stop, Power Off, etc.
•
Refer to the TV owner’s manual for the details of SIMPLINK function.
•
LG TV with SIMPLINK function has the logo as shown above.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 13
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus programmes if you connect a
decoder (not supplied) to the unit. Disconnect the unit’s mains lead from the
mains when connecting the decoder. You do not need to turn on the unit to view
the signals from the connected tuner on your TV.
Pictures containing copy protection signals that prohibit any copying cannot
be recorded.
If you pass the unit signals via the VCR, you may not receive a clear image
on your TV screen.
Be sure to connect your VCR to the unit and your TV in the order shown
below. To watch video tapes, watch the tapes through a second line input on
your TV.
When you record to a VCR from this unit, do not switch the input source to
TV by pressing the TV/DVD button on the remote.
If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART
jack to the AV2 DECODER jack.
If you disconnect the unit’s mains lead, you will not be able to view the signals from the connected VCR or tuner.
To watch or record PAY-TV/Canal
Plus programmes, set [AV2
Connection] option to [Decoder]
(see page 18) and set the program’s [CANAL] option to [On] on
the Setup menu (page 15).
SCART AV
If you disconnect the unit’s mains
lead, you will not be able to view
the signals from the connected
decoder.
Connecting to the AV2 DECODER jack
Connect a VCR or similar recording device to the AV2 DECODER jack of this
unit. You do not need to turn on the unit to view the signals from the connected
tuner on your TV.
To watch or record the source from
AV2 DECODER jack, set [AV2
Connection] option to [Others] (see
page 18) and set [AV2 Recording]
option to [Auto], [CVBS], [RGB] or [SVideo] as required (see page 21).
13
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 14
Connecting to the AV IN 3 Jacks
Operating USB Flash Drive
Connect the input jacks (AV IN 3) on the unit to the audio/video out jacks on
your accessory component using audio/video cables.
ON REMOTE
1. Insert an USB Flash Drive to the USB port:
–
2 Displays the HOME menu:
HOME
3 Select a main option:
bB
[MUSIC], [PHOTO] or [MOVIE] option
4 Select the [USB] option:
vV
5 Displays corresponding menu list:
ENTER
For details of operations on each files, refer to
relevant pages.
Using USB Flash Drive - more you can do
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to connect a DV digital
camcorder and digitally transfer DV tapes to DVD.
Using an USB Flash Drive
This unit can play the MP3/WMA/JPEG/DivX files contained in the USB Flash
Drive.
Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this unit.
Inserting the USB Flash Drive – Insert straight-in until it fits into place.
Removing the USB Flash Drive – Withdraw the USB Flash Drive carefully
when the connected USB Flash Drive is in use.
Notes on USB Flash Drive
The DV IN jack is for connection to DV digital camcorder only. It is not compatible with digital satellite tuners or D-VHS video decks. Disconnecting the DV
cable while recording a contents of the connected digital camcorder may result
in malfunction.
14
The contents on the disc or HDD cannot be moved or copied to a USB
Flash Drive.
Keep the USB Flash Drive out of reach of children. If swallowed, seek medical advice immediately.
This unit supports only USB Flash Drive with FAT16 or FAT32 format.
The USB Flash Drives which require additional software will not be
supported.
This unit is compatible with the Flash type USB device that supports USB
1.1.
This unit may not supports some USB Flash Drive.
Do not extract the USB Flash Drive in operating (play, copy, etc.).
It may cause a malfunction on this unit.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 15
Auto setup
When the first time to turn on the unit, the initial setup
wizard sets the language, clock and channels
automatically.
1 Turn on the unit:
The initial setup wizard appears on the screen.
ON REMOTE
POWER
2 Choose a language:
vV
3 Select the chosen language:
ENTER
4 Check the antenna and go to the next step:
ENTER
5 Choose a clock setting mode:
vV
6 Select the chosen clock setting mode:
ENTER
7 Set the clock:
This step is not available for Auto mode
vVbB,
ENTER
8 Choose a country you are using the unit:
vV
9 Choose a broadcasting type:
All or Analog
BvV
10 Select the [Start] and starts channel scan:
B ENTER
11 Close the initial setup:
ENTER
Auto setup - more you can do
Adjust the programmed channels
Press HOME, then use b B to select [Easy Menu] option. Press ENTER while
[SETUP] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press B to move to the third
level. Press ENTER while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press ENTER. An option menu
on the left side of the screen will be highlighted.
[Favorite] Set the program to favorite channel.
[Delete]: Delete the selected channel from programmed channel list.
[Move] (Analog channel only): Change the order of the channels and which
numerical button they correspond to.
[Block] Blocks the program.
[Station Rename] (Analog channel only): change a name of the selected
channel.
[Program Edit] (Analog channel only): Change the settings of a channel
manually.
Editing a channel (Analog channel only)
You can change the settings of programmed channel by selecting
[Program Edit] option on the left side of the channel editing screen.
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.] Changes the channel number.
[MFT] Fine tunes the channel to obtain a clearer picture.
[CANAL]: Sets the channels for the decoder. You need this setting to watch
or record PAY-TV/Canal plus programs.
[NICAM]: Sets the channels for the NICAM broadcast.
[OK]: Confirm the settings and return to the channel list menu.
15
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 16
Switching the program list on the channel editing screen
You can switch the program list on the channel editing screen.
Using the Home Menu
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select a main option:
bB
3 Select a sub option:
vV
4 Execute the selected option:
ENTER
5 Exit the HOME menu:
HOME
Press v V to move the highlight position to top of the program list.
Press b B to select [DIGITAL TV], [ANALOG TV] or [RADIO] then press v V to
select a program on the list.
Setting a favorite program
You can set a program to favorite channel.
Using the Home Menu - more you can do
MOVIE
Press v V to select a program on the program list then press ENTER to highlight the option menu on the left side of the screen. Press v V to select
[Favorite] option then press ENTER. The program is set to the favorite program
and [FAV] appears on the TV screen.
Setting the AV1 Decoder
Sets the AV1 scart jack for inputting encoded video signals. This option sets the
unit to output the encoded signal from AV1 scart jack to AV2 (DECODER) scart
jack for decoding. The decoded signal is then input back through the AV2
(DECODER) jack so you can record or watch PAY-TV/Canal Plus programs.
Press AV/INPUT once while the channel editing screen appears. The [Decoder
On/Off] option on the option menu. Press ENTER to turn on the option and
press ENTER again to turn off. The [Canal+] appears on the screen when this
option is turned on.
16
HDD – Displays the [Title List] menu, which shows recorded titles on HDD.
(page 33)
HDD DivX – Displays [Movie List] menu, which shows DivX® movie files on
HDD. (page 27)
DISC
– Displays [Title List] menu, which shows recorded titles on the disc. (page
33)
– Displays [Movie List] menu, which shows DivX® movie files on the disc.
(page 27)
– Plays DVD-Video disc (page 25).
USB – Displays [Movie List] menu, which shows DivX® movie files on the
USB Flash Drive. (page 27)
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 17
PHOTO
HDD – Displays [Photo List] menu, which shows photo files on HDD. (page 30)
DISC – Displays [Photo List] menu, which shows photo files on the disc. (page
30)
USB – Displays [Photo List] menu, which shows photo files on the USB Flash
Drive. (page 30)
Adjust the SETUP settings
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select the [Easy Menu] option:
bB
MUSIC
3 Select the [SETUP] option:
ENTER
HDD – Displays [Music List] menu, which shows music files on HDD. (page 29)
DISC – Displays [Music List] menu, which shows music files or audio tracks on
the disc. (page 29)
USB – Displays [Music List] menu, which shows music files on the USB Flash
Drive. (page 29)
4 Select a desired option on the first level:
vV
5 Move to second level:
B
6 Select a desired option on the second level:
vV
7 Move to third level:
B
8 Adjust or confirm the setting:
v V, ENTER
9 Go back to the previous level:
b
Easy Menu
SETUP – Displays SETUP menu. (page 17)
Rec Mode – Displays [Record Mode Set] option in the SETUP Menu. (page 20)
Dubbing – Dubs a currently playing title from a finalized DVD±R or a DVD-ROM
title without copy protection. (page 37)
TV
HDD – Returns to live TV viewing in HDD mode. Pressing the HDD button on
the remote control will also allow you to directly choose this option.
DVD – Returns to live TV viewing in DVD mode. Pressing the DVD button on
the remote control will also allow you to directly choose this option.
Timer Record – Displays [Timer Record] menu. (page 31)
ShowView – Displays [ShowView] screen. (page 32)
First level
Second level
Third level
17
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 18
Adjust the SETUP settings - more you can do
Adjust the general settings
TV Aspect – Selects the aspects ratio of the connected TV.
[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV
and prefer the wide picture with bands on the upper and lower portions of the
screen.
[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture on the entire screen cuts off the portions that do not
fit.
[16:9 Wide]: Select this when connecting to a wide-screen TV.
AV2 Connection – You can connect a decoder or the other device to the
AV2(DECODER) jack on the rear panel.
Auto Programming – This option automatically scans and sets the available
channels. Password is needed to access this option, if [Lock System] option is
set to [On]. (page 20)
[Country]: Select a country where you operate this unit. If the country that you
want to set is not listed, select [Others].
[All, Digital or Analog]: Select a broadcasting type which you want to scan
automatically.
[Start]: Start the channel scanning.
Program Edit– This option allows you to add channels and edit preset
channels. Password is needed to access this option, if [Lock System] option is
set to [On]. (page 20)
[Add Channel]: Select the broadcasting type between [Digital] and [Analog]
and then press v V to select the channel and press ENTER to add the
selected channel.
[Edit]: Displays the screen which show preset channel list and channel
editing options. (page 15)
Clock Set– The clock must be set in order to use [Timer record].
[Auto]: Set the channel that broadcasts a clock signal and the clock will be
set automatically. If the clock that has automatically set is different with your
local clock, you can add more time using [Time Offset] option. (For example,
when summer time is started in local area.) Press B to select [Time Offset]
option. Press v V to select a value then press ENTER (0, 30, 60, 90, 120).
Select “0” if the clock that has automatically set is identified with your local
clock.
[Manual]: If there is no channel that broadcasts a clock signal in your area,
you can set the time and date manually.
18
[Decoder]: Select this when you connect a PAY-TV or Canal Plus decoder to
the AV2(DECODER) jack on the unit.
[Others]: Select this when you connect a VCR or similar recording device to
the AV2(DECODER) jack on the unit.
Video output format – Select an option according to the TV connection type.
[YPbPr]: When your TV is connected to the COMPONENT OUTPUT jacks on
the unit.
[RGB]: When your TV is connected to the SCART jack on the unit.
Antenna Feed 5V – If you are using an indoor antenna, use one with a signal
amplifier rated at DC 5V, 100mA and set this option to [ON].
[ON]: Power is supplied to the connected antenna.
[OFF]: The unit does not supply power to the connected antenna.
Initialization – You can reset the unit to its original factory settings
and format the HDD.
[Factory Set]: You can reset the unit to all its factory settings. Some options
cannot be reset (Rating, Password, and Area Code). The auto setup menu
appears on the screen after the factory settings.
[HDD format]: Everything recorded on the HDD will be erased.
Auto Power Off – If you set this option to [On], when you leave the unit in stop
mode for about 25 minutes, the unit automatically turns itself off.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 19
Adjust the language settings
Adjust the audio settings
Display Menu – Select a language for the Setup menu and on-screen display.
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITAL AUDIO OUTPUT jack.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list
on page 38. If you make a mistake while entering number, press CLEAR to
delete numbers.
[OFF] (for Disc Subtitle): Turn off Subtitle.
DTV Audio – Digital channels sometimes provide multiple audio tracks, often in a
different language. You can set a default audio language with this setting.
If provided by the broadcaster, you can also select a different audio language
while viewing TV by pressing AUDIO repeatedly.
DTV Subtitle – Digital channels sometimes provide subtitle, often in a different
language. You can set a default subtitle language with this setting, if DTV subtitle
is provided by the broadcaster.
Press SUBTITLE repeatedly to select a subtitle language while viewing digital
TV viewing.
DivX Subtitle – Select a language code for the DivX® subtitle.
[Bitstream] – Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an audio component with a built-in Dolby Digital, DTS or
MPEG decoder.
[PCM] (for Dolby Digital / MPEG) – Select this when you connect this unit’s
DIGITAL AUDIO OUTPUT jack to an audio component without a built-in
Dolby Digital or MPEG decoder.
[Off] (for DTS) – Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an audio component without a built-in DTS decoder.
Sample Freq. (Frequency) – Selects the sampling frequency of the audio
signal.
[48 kHz]: In case of DVD with 96KHz sampling, the output is converted to
48KHz. If your receiver or amplifier is NOT capable of handling 96KHz signal,
select [48KHz].
[96 kHz]: The audio signals are output in their original format.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
19
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 20
Adjust the lock settings
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 38.
DivX Reg. Code– We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX®
VOD service. For more information, visit www.divx.com/vod.
Press ENTER when [View] icon is highlighted and you can view the registration
code of the unit.
Adjust the recording settings
To access the Lock System, DVD Rating, DTV Rating, Set Password or Area
Code options, you must enter the 4-digit password. If you have not yet entered
a password you are prompted to do so. Enter a 4-digit password. Enter it again
to verify. If you make a mistake while entering number, press CLEAR to delete
numbers.
If you forget your password, you can reset it. Displays the SETUP menu. Input
‘210499’ and press ENTER. The password has now been cleared.
Lock System – Allows you to set up specific programs and ratings through
blocking schemes. Also allows you to activate or disable all of the lock schemes
previously set up. A password is required to gain access to the lock menu
options. When the Lock System is set to [OFF], the [DTV Rating] is not
effective.
DVD Rating – Select a DVD rating level. The lower the level, the stricter the
rating. Select [No Limit] to deactivate the rating.
DTV Rating – You can set the ratings to block out all the programs with ratings
above a specified level.
[No Control]: You can view all programs.
[04 Years] – [18 Years]: Rating [04 Years] has the most restrictions and
[18 Years] is the least restrictive.
[Lock All]: All programs are locked. To view a program, you must input the
4-digit password you have created.
Set Password – Changes or deletes the password.
[Change]: Enter the new password twice after entering the current password.
[Delete]: Delete the current password after entering the current password.
20
Record Mode Set – Select the picture quality for recording from XP, SP, LP, EP
or MLP. See recording time of each mode on page 41.
[XP]: Highest picture quality.
[SP]: Standard picture quality.
[LP]: Slightly lower picture quality than [SP] mode.
[EP]: Low picture quality.
[MLP]: The longest recording time with the lowest picture quality.
Record Aspect – This option sets the recording aspect ratio to suit the material
you are recording on DVD.
DV Record Audio – You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN jack.
Some digital camcorders have two stereo tracks for audio. One is recorded at
the time of shooting; the other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 21
TV Record Audio – Select an audio channel to record when recording a bilingual program.
[Main+Sub]: Main language and sub language
[Main]: Main language only
[Sub]: Sub language only
Auto Chapter – When DVD recording, chapter markers are added automatically in every specified interval (5, 10 or 15 min.).
AV2 Recording – Selects a method of inputting video signals for the
AV2(DECODER) jack. The picture will not be clear if this setting does not match
the type of the video input signal.
[Auto]: The video input signal will automatically follow the video signal
received.
[CVBS]: Inputs CVBS(composite) video signals.
[RGB]: Inputs RGB signals.
[S-VIDEO]: Inputs S-Video signals.
Time Shift – Set this option to [ON] make this unit to use the Time Shift function automatically without pressing TIMESHIFT button. The timeshift will start in
5 seconds after TV tuner mode is started.
Adjust the disc settings
Finalize – Finalizing is necessary when you play disc recorded with this unit on
other DVD equipment. How long finalization takes depends on the disc condition, recorded length and number of titles.
[Finalize]: The [Finalize] menu appears. The unit starts finalizing after
confirmation.
[Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming
on the [Unfinalize] menu. After unfinalizing, the disc can be edited and rerecord.
Before finalizing, check the characteristics between the disc type in the table
below.
The finalized DVD-RW discs can be unfinalized
so that the disc can edit or record again.
-RW
+R
-R
Once you finalize a disc, you can not edit or
record anything on the disc.
+RW
Discs are automatically finalized when removed from
the unit.
RAM
The finalization does not needed.
Disc Label – This function allow you to change the default disc name to something more descriptive. This name appears when you load a disc and when you
display disc information on-screen. The keyboard menu appears by pressing
ENTER while [Edit] is selected.
Disc Protect – This function allow you to protect discs from accidental record,
erasure and editing by setting this option to [ON]. The DVD-R and Video mode
formatted DVD-RW are not available to protect.
Disc Format – You can Initialize a DVD by pressing ENTER while [Start] is
selected. The [Disc Format] menu appears. The unit starts formatting after
confirmation. You can select a mode between VR and Video for DVD-RW discs.
The everything recorded on the DVD will be erased after formatting.
If you load a completely blank disc, the unit will initialize the disc automatically.
See “Formatting mode (new disc)” on page 5 for more information.
21
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 22
Moving to another title HDD
Displaying disc information
ON REMOTE
1 Play the disc loaded on the unit:
PLAY
DVD ALL
When a disc has more than one title, you can move to another title.
Press DISPLAY twice during playback then use v / V to select the title icon.
Then, press the appropriate numbered button (0-9) or b / B to select a title
number.
2 Displays current status of playback:
DISPLAY
3 Displays the playback menu:
DISPLAY
Starting playback from selected time HDD
vV
Press DISPLAY twice during playback. The time search box shows the elapsed
playing time. Select the time search box and then input the required start time
in hours, minutes, and seconds from left to right. For example, to find a scene
at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press ENTER.
If you enter the wrong numbers, press b / B to move the under bar (_) to the
wrong number. Then enter the correct numbers.
4 Select an item:
5 Adjust the playback menu settings:
bB
6 Exit the disc playback menu:
DISPLAY
Displaying disc Information - more you can do
DVD ALL
DivX
Adjusting playback menu item
Selecting a subtitle language DVD
You can select an item by pressing vV and change or select the setting by
pressing b B.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the subtitle option then use b B to select desired subtitle language.
DivX
OR
a
b
c
d
e
f
g
During playback, press SUBTITLE then press b B repeatedly to select a
desired subtitle language.
Watching from a different angle DVD
If the disc contains scenes recorded at different camera angles, you can change
to a different camera angle during playback.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the angle option then use b B to select desired angle.
Selecting a sound mode DVD ALL
a
b
c
d
e
f
g
22
Current title/track/file / Total number of titles/tracks/files
Current chapter / total number of chapters
Elapsed playing time
Selected audio language or audio channel
Selected subtitle
Selected angle / Total number of angles
Selected sound mode
DivX
This unit can produce a 3D Surround effect, which simulates multi-channel
audio playback from two conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-channel audio from a home
theater system.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the sound option then use b B to select desired sound mode
(3D SUR. or NORMAL).
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 23
Displaying information while watching TV
Changing TV program
During viewing the TV, Press DISPLAY to display the information displayed
on-screen.
Use PR+/PR- on the remote control to change the programs in memory or use
numbered (0-9) buttons to select a program directly.
e
a
b
c
Changing TV program with program list
You can display TV program list using the PR LIST button and switch into other
TV program on the channel list.
While watching a program, press PR LIST to display the TV program list.
Select your desired channel using the v / V and press ENTER to change the
TV program.
Switching the program list
d
a Indicates channel number, station name, and audio signal
(Stereo, Bilingual, Mono) received by the tuner.
(The audio signal indication is available only for the analog channels.)
b Indicates media name and format.
c Indicates the record mode, free space, and elapsed time progress bar.
d Indicates current date and time.
You can switch the program list to DIGITAL TV, ANALOG TV or RADIO.
Press v to move the highlight position to top of the program list.
Press b B to select a [DIGITAL TV], [ANALOG TV], or [RADIO]. Selected
program list appears.
Displaying the favorite program list
You can display favorite channel list that organized by your private taste.
To set a favorite program, use [Program Edit] option in the Setup menu. (page
18.)
e Indicates program title, start time, end time, etc.
(Extended Text Message Icon): Indicates that there is an Extended
Text Message available to provide detailed descriptions of the program
(see page 24).
(DTV Subtitle Icon): Indicates that the current program contains the
subtitle.
(Wide Icon): Indicates that the current program is shown in wide
picture format.
(Teletext Icon): Indicates that there is a Teletext available (see page
25).
Press Red colored button while watching a TV. The favorite options appears.
Press v V to select a desired program then press ENTER to watch the selected
program.
23
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 24
Switching the EPG menu
Using the digital EPG
ON REMOTE
1 Displays the EPG menu:
EPG
2 Select a TV program:
vV
3 Displays the next/previous menu list:
.>
4 Shows the selected program currently on air:
ENTER
5 Exit the EPG menu:
EPG or RETURN
The EPG screen provides two search menus.
Press yellow color button when the EPG menu is displayed.
Now/Next: The screen shows now and next programs.
Using the digital EPG - more you can do
About the digital EPG
The digital EPG shows a table of scheduled digital TV programs and detailed
information about individual program. The digital EPG screen consist of
program information, channel list and general program list.
Note that the unit’s clock must be set to the correct time and date to ensure all
relevant EPG information is displayed.
8 Days: The screen shows programs within 8 days. When the EPG menu
with 8 days is displayed, you can also change the date of the EPG menu by
pressing the green color button then use b / B to select a date.
Displaying the detailed Information window
You can view detailed information for the highlighted program. Press blue color
button to display detailed information window. To exit the detail information window, press blue color button again.
You can set a timer record using EPG menu with 8 days. Select a program
then press red color button. The red timer icon will be displayed and the program will be memorized by the recorder.
You can check the programming on the [Timer Record List] menu (see page
31). To cancel the timer recording, select the program then press red color
button. The red timer icon disappears.
24
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 25
Viewing a Teletext service
Teletext is a free broadcasting service by some TV stations which gives
up-to-the-minute information on news, weather, television programs, share
prices and many other topics.
The recorder gives you access to teletext which is greatly improved in various
aspects such as text and graphics. This teletext can be accessed by special
teletext services and specific services which broadcast teletext.
Use numbered (0-9) buttons or PR/CH on the remote control to change the
program which broadcast teletext. Press TEXT to access on the teletext.
Follow the indications on teletext and move onto the next or previous step by
pressing color (RED or GREEN) or SKIP (. / >) buttons.
Press (TEXT) or RETURN (O) to turn the teletext off and return to TV viewing.
Selecting teletext page
Enter the desired page number as a three digit number with the numbered
buttons. If during selection you press a wrong number, you must complete the
three digit number and then enter the correct page number again.
Use RED/GREEN buttons to move up and down pages.
Play a disc
ON REMOTE
1 Open the disc tray:
Z)
OPEN/CLOSE (Z
2 Insert a disc:
-
3 Close the disc tray:
Z)
OPEN/CLOSE (Z
4 Adjust the disc menu settings:
A disc menu may not appears on the screen
depending on the disc.
v V b B, ENTER
5 Starts playback:
N)
PLAY (N
6 Stops playback:
x)
STOP (x
Play a disc - more you can do
Playing a disc that contains a menu DVD
The menu screen may be displayed first after loading a DVD which contains a
menu.
Use the b / B / v / V buttons to select the title/chapter you want to view, then
press ENTER to start playback. Press TITLE or MENU/LIST to return to the
menu screen.
Skip to the next/previous chapter/track/file
HDD
DVD ALL
ACD
MP3
WMA
DivX
Press SKIP (>) to move to the next chapter/track/file.
Press SKIP (.) to return to the beginning of the current chapter/track/file.
Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
25
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 26
Pause a playback
Playing repeatedly HDD
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue
playback.
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter, folder or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [OFF].
Frame-by-Frame playback HDD
DVD ALL
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
You can advance or back up the picture frame-by-frame by pressing b / B
repeatedly during PAUSE mode.
Fast forward or fast reverse HDD
DVD ALL
ACD
DivX
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the various playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY ( N) to continue play at normal speed.
Hearing a different audio HDD
DVD ALL
DivX
Press AUDIO then press b or B repeatedly to hear a different audio language,
audio track or encoding method.
Slow down the playing speed HDD
DVD ALL
While playback is paused, press SCAN(bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY ( N)to continue play at normal
speed.
Viewing the Title menu DVD
Press TITLE to displays the title menu or disc menu. If the current DVD title has
a menu, the title menu appears on the screen. Otherwise, the disc menu may
appears.
26
DVD ALL
ACD
Repeating a specific portion (A-B) HDD
MP3
WMA
DVD ALL
ACD
Press REPEAT to select [A-] at the beginning of the portion you wish to repeat
and press ENTER at the end of the portion. Your selected portion will be
repeated continually. You cannot select a portion less than 3 seconds.
To return to normal playback, press REPEAT repeatedly to select [OFF].
Last Scene Memory DVD
This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch off the
unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 27
Divx file requirement
Playing DivX® movie files
ON REMOTE
1 Displays the HOME menu:
HOME
2 Selects a [MOVIE] option:
bB
3 Selects an option that contains DivX file:
v V, ENTER
4 Selects a movie file from the menu:
vV
5 Plays the selected movie file:
PLAY
6 Stops the playback:
STOP
Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”, “.sub (Micro DVD format only)”,
“.txt (Micro DVD format only)”
Playable Codec format: “DIV3”, “MP43”, “DIVX”, “DX50”
Playable Audio format: “AC3”, “PCM”, “MP2”, “MP3”, “WMA”
Sampling frequency: within 8-48 kHz (MP3), within 32-48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Playing a DivX® movie files - more you can do
Notes on DivX format
Movie List menu options
Select which file you would like to show from the menu and press ENTER. An
options menu appear on the left side of the screen.
The DivX subtitle file name has to be identified with the DivX file name to be
display on the unit.
If the subtitle file does not display properly, change the language code in the
[DivX Subtitle] option. (page 19)
If the number of the screen frame is over 29.97 frames per second, this unit
may not operate normally.
If the video and audio structure of DivX file is not interleaved, the audio and
video output may not be matched properly.
If there is impossible code to express in the DivX file name, it may be displayed as “_” mark.
If a bitrate of DivX file on the USB is over 4Mbps, the file may not be played
properly.
[Play]: Starts playback the selected file.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) of folder (s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
Displaying movie file information
Press DISPLAY to show file information on the highlighted file in the movie list.
27
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 28
Selecting multiple files or folders on the list
Copying file(s) or folder(s) to the HDD
You can select not only single file but also multiple files using MARKER
button. Press MARKER at the desired files to select multiple files.
You can copy file(s) or folder(s) to the HDD.
Selecting all files and folders on the current list
If you want to select all files and folders on the list, press CLEAR at any
file or folder on the list. Press CLEAR again to deselect files and folders.
This function is not available for Audio CD.
Naming a file or folder on the HDD
You can name a file or folder on the HDD. The length of a name can be up to
32 characters long.
Select file(s) or folder(s) you would like to copy then press ENTER. Select [Edit]
option then press ENTER to show sub options. The [Copy] menu appears by
pressing ENTER while [Copy] option is selected. Select a directory that you
would like to copy to. Select the [Copy] option then press ENTER to begin
copying.
Moving file(s) or folder(s) to the other folder on the HDD
You can move file(s) or folder(s) to the other folder on the HDD.
Select a file or folder you would like to rename then press ENTER. Select [Edit]
option then press ENTER to show sub options. The keyboard menu appears by
pressing ENTER while [Rename] option is selected.
Select file(s) or folder(s) you would like to move then press ENTER. Select
[Edit] option then press ENTER to show sub options. The [Move] menu appears
by pressing ENTER while [Move] option is selected. Select a directory that you
would like to move to. Select the [Move] option then press ENTER to begin
moving.
28
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 29
Displaying MP3/WMA file information
Listening to a music
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select a [MUSIC] option:
bB
3 Selects an option that contains music:
v V, ENTER
4 Selects a music from the menu:
vV
5 Plays the selected music:
PLAY
6 Stops the playback:
STOP
Press DISPLAY while the file you want to show the file information is selected.
The unit shows the ID3-Tag information of the file. If the file does not have
ID3-Tag information, [ID3-Tag: None] appears on the screen.
MP3/WMA audio file requirement
File extensions: “.mp3”, “.wma”.
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Listening to a music - more you can do
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Music List menu options
Creating your own program
Select which file/track you would like to show from the menu and press ENTER.
A menu appears on the left side of the screen.
You can play the contents in the order you want by arranging the order of the
musics. The program is cleared when exit the [Music List] screen.
To add or erase a music(s) on the program list, press MENU/LIST to display the
[Program List].
Select a desired music from the [Music List] then press ENTER. If you want to
select multiple files/tracks, press MARKER at the every desired files/tracks.
Select the [Program Add] option then press ENTER to add the selected
files/tracks to the [Program List]. Select a music from the [Program List] then
press PLAY to start programmed playback.
You can change the playing order using [Move] option on the program list
menu.
Audio CD
MP3/WMA
[Play]: Starts playback the selected file/track.
[Random]: Starts or stops random playback.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) or folder(s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
[Program Add]: Adds a file(s)/track(s) to [Program List].
[Save]: Saves a [Program List] that you have arranged in the HDD.
[Load]: Loads a saved [Program List] in the HDD.
Erasing tracks/files from Program List
To delete a music from the program list, select the music you want to delete
then press ENTER. An option menu appear on the left side of the screen. Select
the [Delete] option then press ENTER to erase the music from the list.
Save your Program List (HDD only)
This unit memorizes the [Program List] that you have programmed. Select a file
on the [Program List] then press ENTER. Select the [Save] option then press
ENTER to save the [Program List].
29
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 30
Rotate a photo
Viewing a photo
Use vV to rotate the photo while displayed in full screen.
ON REMOTE
1 Displays the HOME menu:
HOME
2 Selects a [PHOTO] option:
bB
3 Selects an option that contains photo file:
v V, ENTER
4 Selects a photo from the list:
vVbB
5 Displays the selected photo in full screen:
PLAY
6 Returns to the Photo List:
STOP
Viewing a photo - more you can do
Photo List menu options
Select which file you would like to show from the menu and press ENTER.
A menu appears on the left side of the screen.
Viewing photo files as a slide show
To slide show photos in the [Photo list], select the [Slide Show] option on the left
side of the screen then press ENTER, The [Slide Show] menu appears on the
screen. Set the [Object] and [Speed] options then press ENTER while [Start]
option is selected. The unit starts slide show as you set on the menu.
[Object] option:
[Selected] Views slide show only selected files.
Use the MARKER button to select multiple files.
[All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or [Fast].
Listening to music during slide show
You can slide show photo files while listening to MP3/WMA music files on HDD.
Press ENTER while [Simultaneous Music play] option is selected on the [Slide
Show] menu. The music file selection menu appears on the screen. Press
MARKER at the desired files to play then press ENTER while [Start] option is
selected. The unit starts slide show with music playing.
[Select All]: Select all files in current directory.
[Deselect All]: Deselect all files.
Pause a slide show
Press PAUSE/STEP to pause a slide show. Press PLAY to continue the slide
show.
Photo file requirement
[Full Screen]: Shows the selected file in full screen.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) or folder(s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
[Slide Show]: Displays the [Slide Show] menu.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo while displayed in full
screen.
30
File extension: “.jpg”
Photo size: Less than 4MB recommended
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Notes on JPEG file
Progressive and lossless compression JPEG image files are not supported.
Depending on the size and number of the JPEG files, it may take several
minutes to read the contents of the media.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 31
Setting a timer record
Recording
Follow the instruction below to record a TV channel or
other source. The recording continues until the media
is full, you stop the recording or the progress of
recording is more than 12 hours.
This unit can be programmed to record up to 16 timer recordings within a
month. The clock must be set correctly before setting a timer.
ON REMOTE
1 Selects a recording mode:
You can select a recording mode on the
SETUP menu. (XP, SP, LP, EP or MLP)
HOME,
v V b B,
ENTER
2 Selects a recording media:
HDD or DVD
3 Selects a channel or source you want to record: PR/CH, AV/INPUT
4 Starts recording:
REC
5 Stops recording:
STOP
Recording - more you can do
Changing TV audio channel
Before recording, you can change the TV audio channel for stereo and bilingual
broadcast. Press AUDIO repeatedly to change the audio channel. The current
audio channel is displayed on-screen. Set the [TV Rec Audio] option in the
SETUP menu when recoding a bilingual broadcast.
Instant timer recording
Press HOME and select TV option. Press v V to select the [Timer Record] and
press ENTER to display [Timer record List] menu. Use v V to select [New] and
press ENTER to display [Timer Record] menu. Adjust the each field as
described below using v V b B.
[Media]: Choose a media to record (HDD or DVD).
[CH/PR]: Choose a memorized program number, or one of the external
inputs from which to record. (You cannot select DV input and radio channel.)
[Date]: Choose a date up to 1 month in advance.
[Start Time]: Set the start time.
[End Time]: Set the end time.
[Repeat] Choose a desired repeat (Once, Daily (Mon-Fri), or Weekly).
Recordings from EPG menu will always be set to [Once].
Press REC repeatedly to set the recording mode (XP, SP, LP, EP or MLP) then
press ENTER to set a timer recording. The “Rec OK” or “OK” on the [Check]
field on the [Timer Record List] menu indicates the timer recording is
programmed correctly.
Instant timer recording allow you to make a recording of preset length easily.
When the REC is first pressed, recording starts. Press REC repeatedly to select
a certain amount of time. Each press of REC to displays the increased recording time on-screen. You can set the instant timer recording up to 240 minutes
on HDD or up to 720 minutes on DVD, depending on the free space available.
31
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 32
Canceling a timer recording
Record from a camcorder
You can cancel a timer record before the timer recording actually starts. Select
a timer recording that you want to cancel on the [Timer Record List] menu and
press CLEAR.
You can record form a DV-equipped camcorder to the HDD by connecting it
with a DV cable. You can also record form a digital camcorder connected to the
DV in jack on the front of the unit. Press AV/INPUT repeatedly to select the DV
input. Find the place on the camcorder recording that you want to begin recording from and press REC to start recording. Depending on your camcorder, you
can use this recorder’s remote to control the camcorder using the STOP, PLAY
and PAUSE functions. Press STOP to end recording.
Timer Recording Troubleshooting
Even though the timer is set, the unit will not record when:
– There is no disc loaded and there is not free space on the HDD.
– A non-recordable disc is loaded and there is not free space on the HDD.
– [Disc Protect] option is set to [ON] in the Setup menu and there is not free
space on the HDD (see page 21).
– The unit is in operating (recording, copying, deleting etc.).
– There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R,
DVD+RW) recorded on the disc and there are already 255 titles recorded
on the HDD.
You cannot enter a timer program when:
– A recording is already underway.
– The time you’re trying to set has already passed.
– There are already 16 timer programs set.
If two or more timer programs overlap:
– The earlier program takes priority.
– When the earlier program finishes, the later program starts.
– If two programs are set to start at exactly the same time, the program
entered first takes priority.
Simultaneous playback and record
You can play other contents while you are recording. Simply press HOME and
select the playable contents you want to play while recording. You cannot playback other contents while copying or dubbing. The DivX file cannot be played
while recording. When you recording on a DVD, the contents on the DVD cannot be played.
Time Slip
You can watch the title that you are currently recording to HDD with this function. After the recording is progressed over 15 seconds, press PLAY to playback
the title that you are currently recoding. If you stop playback the title, returns to
the current recording position.
32
Recording From an external inputs
You can record from an external component, such as a camcorder or VCR,
connected to any of the recorder’s external inputs.
Each press of the AV/INPUT changes the input source as described below.
Make sure that the component you want to record from is connected properly to
the unit before recording an external source.
Tuner: Built-in tuner
AV1: AV1 scart jack mounted on back panel
AV2: AV2 DECODER scart jack mounted on back panel
AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel
DV: DV IN mounted on front panel
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 33
Using time shift function
This feature allow you to pause or rewind live TV, so you do not miss a thing if
you were interrupted.
Press TIMESHIFT then press PAUSE/STEP while watching live broadcast
before answering the phone. The timeshift function will record the broadcast of
later viewing. Before using this function, make sure that the unit is in HDD
mode.
Editing a title
Using the Title list menu,you can edit video contents.
ON REMOTE
1 Selects a recording media:
HDD or DVD
2 Displays a [Title List] menu:
MENU/LIST
3 Selects a title you want to edit:
vVbB
If no button is pressed for 6 hours, the timeshift will stop automatically. You can
use trick play functions (slow, scan, etc.) during timeshift. Refer to playback
operation on page 25-26.
4 Displays an editing menu:
ENTER
The options are differ depending on the media type.
Stop timeshift by pressing STOP and confirm by pressing ENTER. You will
returned to watch a broadcast in real time.
5 Selects a menu option:
v V b B, ENTER
6 Exit the [Title List] menu:
RETURN
Jump to start or end during timeshift
Press ENTER to show progress bar during timeshift. Press b to jump to the
beginning and B to jump to the end of the timeshift.
Editing a title - more you can do
Clip recording
About title list menu
If you want to record a timeshifted program as a title, press REC at the starting
point and ending point you want to record. The timeshift progress bar indicates
a clip that you select with red bar. You can make more clips by repeating this
instruction. The clips will be recorded when you exit the timeshift function.
Press MENU/LIST to display the Title List menu. Playback should be stopped
when you do this. You can also access it using HOME menu, select [MOVIE]
option then select [HDD] or [DISC] option and press ENTER. If you are editing
a VR mode disc, press MENU/LIST to switch between Original and Playlist
menu.
Using time shift function automatically
If the [Time Shift] option in the SETUP menu is set to [ON], timeshift starts
automatically without pressing TIMESHIFT button in HDD mode.
If you want to quit timeshift function, set the [Time Shift] function to [OFF].
a
b
d
e
f
c
a Current media
b Indicates the record mode, free space, and elapsed time progress bar.
c Menu options: To display menu option, select a title or chapter then press
ENTER. The options displayed differ depending on the disc type.
d Currently selected title.
e Thumbnail
f Shows the title name, recorded date, and recording length.
33
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 34
Before editing
Chapter search HDD
This unit offers various edit options for various disc types. Before you edit,
check the disc type, and select the option available for your disc.
You can select the start of a title by searching a chapter. Select a title that you
want to search and press ENTER. Select [Chapter] in the [Search] option from
the menu on the left of the screen, and press ENTER to display the [Chapter
List] menu.
You can enjoy advanced edit functions with VR mode formatted DVD (DVD-RW
or DVD-RAM). Editing either the original recording(called the “original”), or the
playback information created from the original (called a “Playlist”).
Edits made to the original titles are final. If you plan to edit a title without editing
the original title, you can create a Playlist title for editing.
A Playlist is a group of Playlist titles created from the original title for editing
purpose.
Titles in the disc’s original content contain one or more chapters. When you
insert a disc’s title into the Playlist, all the chapters within that title also appear.
In other words, chapters in the Playlist behave exactly as chapters on a DVDVideo disc do. Parts are sections of Original or Playlist titles. From the Original
and Playlist menu you can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie., chapter) of an Original
title. Deleting a part removes part of a title from the Original or Playlist menu.
Adding chapter markers HDD
-RWVR
+RW
+R
-RWVR
-RWVideo
+RW
+R
-R
RAM
Use v V b B to find the chapter you want to start playback, and press PLAY to
start playback.
Making a new PlayList -RWVR
RAM
The PlayList allow you to edit or re-edit a title or chapter without changing the
Original recordings. Use this function to add an Original title or chapter to a new
PlayList or the registered Playlist.
RAM
You can create chapters within a title by inserting chapter marks at the desired
point. Press MARKER at the desired point while playback or recording.
A chapter marker icon appears on the screen.
The chapter markers can be added at regular interval automatically by setting
the [Auto Chapter] option in the SETUP menu.
Deleting a title or chapter
When you delete a title or chapter from the PlayList, the title or chapter in the
Original still remains. However, if you delete a chapter or title from Original, the
title or chapter deleted from the Original are also removed from PlayList.
Select a title or chapter that you want to delete and press ENTER. Select
[Delete] option from the menu on the left of the screen and press ENTER to
confirm.
HDD – You can delete multiple files using MARKER button. Press MARKER at
the desired files to select multiple files and then follow the instruction above.
34
Select an Original title or chapter that you want to put into the PlayList then
press ENTER. Select the [Playlist Add] option and then press ENTER to display
the [Select PlayList] menu. Choose a PlayList-title that you want to put the
selected Original title or chapter to, or select the [New PlayList] to create a new
PlayList.
Moving a PlayList chapter -RWVR
RAM
Use this function to re-arrange the playing order of a PlayList title on the
[Chapter List-Playlist] menu. Select [Move] option from the menu on the left of
the [Chapter List-Playlist] screen and press ENTER. Use v V b B to choose
the place you want to move the chapter then press ENTER. The updated menu
is displayed
RH499D-P-BDEULLW_ENG
Time search HDD
11/14/12
-RWVR
3:09 PM
-RWVideo
+RW
Page 35
+R
-R
RAM
You can select the start of a title by searching through the time duration. Select
a title that you want to search and press ENTER. Select [Time] in the [Search]
option from the menu on the left of the screen and press ENTER to display the
[Search] menu.
Dividing a title HDD
+RW
Use this function to split a title up into two titles. Select a title that you want to
divide and press ENTER. Select [Divide] in the [Edit] option from the menu on
the left of the screen and press ENTER to display the [Divide] menu. Find the
point you want to divide a title using PLAY, SCAN, PAUSE/STEP buttons and
press ENTER while [Divide] option is selected. The playback screen shows the
divided point. Select [Done] option and press ENTER to divide. You cannot
select dividing point less than 3 seconds.
Protect a title -RWVR
+RW
+R
RAM
Use this function to protect a title against accidental recording, editing or deleting. Select a title you want to protect and press ENTER. Select [Protect] option
from the menu on the left and press ENTER. The lock mark will appears on the
title thumbnail.
Use b B to find the time you want to start. Each press of b B to moves 1
minute and press and hold b B to moves 5 minutes. Press ENTER to watch a
title from a selected time.
Deleting a part HDD
Sorting the titles HDD
Press ENTER to bring up the options menu. Select [Sort] option and press
ENTER to view the further options. Here you can choose to sort titles according
to [Date] (when they were recorded), [Title] (alphabetical order) or by [Category]
(sort by genre).
Combining titles HDD
Use this function to merge the selected title with another title. Select a title and
press ENTER. Select [Combine] in the [Edit] option then press ENTER. Select
a title you want to combine with current title and press ENTER to confirm.
Hiding a chapter or title +RW
If you want to unprotect the title, select the protected title and press ENTER.
Select [Unprotect] option from the menu on the left and press ENTER to unprotect it.
+R
You can skip through playing chapters or titles without actually deleting them.
Select a chapter or title you want to hide and press ENTER. Select [Hide] in the
[Edit] option then press ENTER.
-RWVR
RAM
You can delete a part which you do not want in the title.
Select a title that you want to delete part and press ENTER. Select [Delete
Part] in the [Edit] option from the menu on the left of the screen and press
ENTER to display the [Delete part] menu. You can find the point using PLAY,
SCAN, PAUSE/STEP buttons.
[Start Point]: Select starting point of a part that you want to delete then press
ENTER.
[End Point]: Select ending point of a part that you want to delete then press
ENTER.
[Next Part]: Press ENTER to delete a additional part (HDD only).
[Cancel]: Press ENTER to cancel the selected part.
[Done]: Press ENTER to delete the selected part.
If you want to recover the hidden title or chapter, select the hidden title or chapter and press ENTER. Select [Show] in the [Edit] option then press ENTER to
recover it.
35
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 36
Naming a title
When a title is recorded by this unit, the title name will be named by a number.
You can change a title name by using this function.
The chapters that you want to combine are created by deleting a part from
an Original title.
The chapters that you want to combine are created from different titles.
One of the playlist chapter that you want to combine has been moved.
Using the Disc menu
Using the title list menu in DVD mode, you can use the disc setting functions
without entering the SETUP menu.
Select a title that you want to change a name and press ENTER. Select
[Rename] or [Title Name] option from the menu on the left of the screen and
press ENTER to display the keyboard menu. Use v V b B to select a character
then press ENTER to confirm your selection on the keyboard menu.
[OK]: Finish the naming.
[Cancel]: Cancels all entered characters.
[Space]: Inserts a space at the cursor position.
[Delete]: Deletes the previous character at the cursor position.
You can use remote control buttons for entering a name
PLAY (N): Inserts a space at the cursor position.
X (PAUSE/STEP): Deletes the after character at the cursor position.
x (STOP), CLEAR: Deletes the previous character at the cursor position.
. / >: Moves cursor to left or right.
MENU/LIST, DISPLAY: Changes the character set on the keyboard menu.
Numbers (0-9): Enters the corresponding character at the cursor position.
You can apply a genre for a selected title on HDD. When a character is highlighted on the keyboard menu, keep pressing b until the curser jumps across to
the Genre field. Choose desired genre and press ENTER to select it.
The chosen genre name will appear at the lower right corner of the title thumbnail.
Combining chapters HDD
-RWVR
+RW
+R
RAM
Use this function to merge the selected chapter with adjacent chapter. Select a
chapter and press ENTER. Select [Combine] option to views combine indicator
between chapter thumbnails. Press ENTER to combine indicated two chapters.
This function is not available in conditions as listed below.
There is only one chapter within the title.
The first chapter is selected.
36
Use v V b B to select the [Disc] option on the DVD title list menu and then
press ENTER to show further options.
[Disc Format]: Format the inserted disc. (page 21)
[Finalize]: Finalize the inserted disc. (page 21)
[Unfinalize]: Unfinalize the inserted disc. (page 21)
[Disc Label]: Use this to enter a name for the disc. This name appears when
you load the disc and disc information on-screen. (page 21)
[Protect]: Use this to prevent accidental recording, editing, deleting of the
inserted disc. (page 21)
[Unprotect]: Release the protect function.
Overwriting +RW
You can overwrite a new video recording on a recorded title that is not protected. Select the TV channel or input source you want to record. Press
MENU/LIST to display the Title List menu. Use v V b B to highlights a title you
want to overwrite and then press REC to start overwrite. To stop the recording,
press STOP.
If you overwrite the longer recording than the current title on the fully recorded
disc, the next title is overwritten. If next title is protected, the overwriting stops at
the starting point of the title.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 37
About ‘Fast’ copying
Dubbing a title
Using the title list menu, you can dub video contents.
ON REMOTE
1 Selects a recording media:
HDD or DVD
2 Displays a [Title List] menu:
MENU/LIST
3 Selects a title you want to dub:
vVbB
4 Displays an editing menu:
ENTER
5 Selects the [Dubbing] option:
vV
6 Displays the [Dubbing] menu:
ENTER
7 Sets the [Rec mode] option:
XP, SP, LP, EP, MLP, AUTO or Fast modes
vVbB
Copying between DVD and HDD is a complete digital process and therefore
involves no loss of quality in the audio or video. This allow for high speed copying for ease and convenience.
When copying from HDD to DVD, the speed of copying depends on the
recording mode and the kind of DVD disc you’re using. The Fast copying is
available for unedited original video titles, and may not be possible when using
disc initialized on another recorder.
When you dubs a title from the DVD to HDD, only a VR mode formatted disc
can use [Fast] mode.
8 Highlights the [Start] icon:
vV
When you dubs a title from the HDD to VR mode DVD-RW or DVD-RAM, the
[Fast] mode is not available for edited HDD title and Clip Recording title. And
dub a edited title from VR mode DVD-RW or DVD-RAM to HDD also cannot
use [Fast] mode.
9 Starts dubbing:
ENTER
Dub multiple titles from HDD to DVD HDD
You can select not only a single title but also multiple titles using MARKER
button. Press MARKER at the desired titles to select multiple titles, and press
ENTER to display the menu on the left of the screen. Select [Dubbing] option
from the menu on the left of the screen and press ENTER to display the
[Dubbing] menu. Use v V b B to select [Start] icon then press ENTER to confirm.
Dubs a currently playing title +R
Dubbing a title - more you can do
Before dubbing
Use the copying features of this recorder to:
Back up important recordings stored on the HDD to a DVD.
Make a DVD copy of a recording on the HDD to play in another player.
Transfer video from a DVD to the HDD for editing.
Transfer edited video from the HDD to DVD.
-R
This feature copies a single title to the HDD in real time. When you start
copying, playback jumps back to the start of the title, then continues through to
the end of the title, when recording automatically stops. The copy will be made
in the recording mode (XP, SP, LP, EP or MLP) that is currently set in the
SETUP menu.
During DVD playback, press HOME to display the HOME menu. Select the
[Dubbing] in the [Easy Menu] option, and press ENTER to start dubbing. The
[Dubbing] option in the HOME menu will activated only for a title from finalized
DVD±R or DVD-ROM title without copy protection.
37
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 38
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
38
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 39
Troubleshooting
General
The power does not turned on.
b Plug the power cord into the wall outlet securely.
There is no picture.
b Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
b Connect the video connection securely.
b Check the [Video Output Format] in SETUP menu is set to the appropriate item that conforms to your video connection.
Picture noise appears.
b You are playing a disc recorded in a color system that is different form
your TV.
b The video signal from the external component is copy-protected.
b Set the resolution that your TV can accepts.
The channel is not found or stored.
b Check your antenna connection.
There is no sound.
b Connect the audio connection securely.
b The input source setting on the amplifier or the connection to the amplifier
is incorrect.
b The unit is in scan, slow motion, or pause mode.
The remote control does not work properly.
b
b
b
b
Playback
The unit does not start playback.
b Insert a playable disc. (Check the disc type, color system, and regional
code.)
b
b
b
b
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Cancel the Rating function or change the rating level.
Cannot play a disc recorded using this unit on other player.
b Finalize the disc.
b Check the disc compatibility of the player.
b Place the disc on the disc tray correctly inside the guide.
b Discs recorded with copy-once material cannot be played on other
players.
The angle cannot be changed.
b Multi-angles are not recorded on the DVD Video being played.
b The angle cannot be changed for the titles recorded on this unit.
The subtitle language cannot be changed or turned off.
b Subtitles are not recorded on the DVD Video being played.
b The subtitle cannot be changed for the titles recorded on this unit.
Cannot play MP3/WMA/JPEG/DivX files.
b The files are not recorded in a format that the unit can play.
b The unit does not support the codec of the DivX movie file.
b The resolution is higher than the unit can support.
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
39
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 40
Recording
Cannot record or does not record successfully.
b Check the remaining space on the disc.
b Check that the source you are trying to record in not copy protected.
b The power may have failed during recording.
b Use a VR mode formatted disc for copy-once material.
Timer record does not record successfully.
b Clock is not set to correct time.
b The start time of the timer recording is past.
b Two timer recordings may have overlapped, in which case only the earlier
one will record completely.
b When setting the recording channel, make sure you set the unit’s built-in
tuner, not the TV’s built-in tuner.
Stereo Audio Record and/or Playback is not present.
b TV is not Stereo-compatible.
b Broadcast program is not in stereo format.
b The A/V Output jacks on the unit are not connected to TV A/V In jacks.
HDMI
The connected HDMI device does not display any picture.
b
b
b
b
Try disconnecting then reconnecting the HDMI cable.
Try switching the power of the HDMI device off then back on.
The video input of the connected device is set correctly for this unit.
The HDMI cable you are using is fully HDMI-compliant . Using a non-standard cable may result in no picture being output.
b Not all HDCP-compatible DVI devices will work with this unit.
The connected HDMI device does not output sounds.
b Some HDMI-compatible devices do not output sounds (check the manual
that came with the connected device).
b If your TV is not capable of handling 96 kHz sampling frequency, set the
[Sampling Freq.] option to [48 kHz] on the setup menu. When this choice
is made, this unit will automatically convert any 96 kHz signals to 48 kHz
so your system can decode them.
b If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital] and [MPEG] options to [PCM] on the setup menu.
40
b If your TV is not equipped with DTS decoder, set the [DTS] options to
[OFF] on the setup menu. To enjoy DTS multi channel surround, you must
connect this unit to a DTS compatible receiver via one of this unit’s digital
audio outputs.
Resetting the unit
If you observe any of the following symptoms.
The unit is plugged in, but the power will not turn on or off.
The front panel display is not working.
The unit is not operating normally.
You can reset the unit as follows.
Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
Unplug the power cord, wait at least five seconds, and then plug it in
again.
Setting up the remote to control your TV
You can operate your TV with the supplied remote control.
If your TV is listed in the table below, set the appropriate manufacturer code.
While holding down TV POWER button, and press the manufacturer code for
your TV with the numerical buttons (see the table below). Release the TV
POWER button to complete setting.
Manufacturer
Code Number
LG / GoldStar
1 (Default), 2
Zenith
1, 3, 4
Samsung
6, 7
Sony
8, 9
Hitachi
4
Depending on your TV, some or all buttons may not function on the TV, even
after entering the correct manufacturer code. When you replace the batteries of
the remote, the code number you have set may be reset to the default setting.
Set the appropriate code number again.
RH499D-P-BDEULLW_ENG
11/14/12
3:09 PM
Page 41
Audio recording format
Sampling frequency
Compression format
Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Net weight (approx.)
Operating temperature
Operating humidity
Television system
Recording format
AC 200-240V, 50/60 Hz
30W
430 X 49 X 275 mm (w x h x d) without foot
3.5 kg
5˚C to 35˚C
5 % to 65 %
Analog: PAL I, B/G, I/I, SECAM D/K, K1
color system
Digital: DVB-T Standard Compliant
PAL
Playback
Frequency response
Signal-to-noise ratio
Harmonic distortion
Recordable time
Video recording format
Sampling frequency
Compression format
DVD Video Recording, DVD-VIDEO
HDD (320GB), DVD-RW, DVD-R, DVD+RW,
DVD+R, DVD+R(Double Layer), DVD-RAM
DVD (4.7GB): Approx. 1 hour (XP mode),
2 hours (SP mode), 4 hours (LP mode),
6 hours (EP mode), 14 hours (MLP mode)
DVD+R DL (8.5GB): Approx. 3 hours
(XP mode), 3.8 hours (SP mode),
7.3 hours (LP mode), 9.1 hours (EP mode),
21 hours (MLP mode)
HDD (320GB, MPEG2 Recording):
Approx. 85 hours (XP mode),
165 hours (SP mode),
323 hours (LP mode),
456 hours (EP mode),
935 hours (MLP mode)
27MHz
MPEG2
DVD (PCM 48 kHz): 8 Hz to 22 kHz,
CD: 8 Hz to 20 kHz
DVD (PCM 96 kHz): 8 Hz to 44 kHz
More than 90 dB (AUDIO OUT connector)
Less than 0.02% (AUDIO OUT connector)
Inputs
ANTENNA IN
VIDEO IN
Recording
Recording format
Recordable media
48kHz
Dolby Digital
AUDIO IN
DV IN
USB IN
Antenna input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 1
/ SCART x 2
2.0 Vrms more than 47 kohms, RCA jack
(L, R) x 1 / SCART x 2
4 pin (IEEE 1394 standard)
4 pin (USB 1.1 standard)
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
HDMI
Audio
Audio
Audio
video/audio output
output (digital audio)
output (optical audio)
output (analog audio)
1 Vp-p 75 Ω, sync negative, SCART x 2
(Y) 1.0 V (p-p), 75 Ω, sync negative,
Mini DIN 4-pin x 1(C) 0.3 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1, (PB)/(PR) 0.7 V (p-p), 75 Ω,
RCA jack x 2
19 pin (HDMI standard, Type A)
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), Optical connector x 1
2 Vrms (1 kHz, 0 dB), 600 Ω,
RCA jack (L, R) x 2 / SCART x 2
Accessories
RF cable (1), Remote control (1), Battery (1)
Design and specifications are subject to change without notice.
41