MX-F830B
MINI-Compact System
MP3-CD/WMA-CD/CD-R/RW Playback
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
MX-F830B-ZA-ENG-0228.indd 1
2013-3-13 16:29:13
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage” inside CAUTION : TO PREVENT ELECTRIC
the product that presents a risk of electric shock or SHOCK, MATCH THE WIDE BLADE OF THE
personal injury.
PLUG TO THE WIDE SLOT IN THE WALL
OUTLET, AND THEN FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
• Do not expose this device to dripping or splashing. Do
not place items containing liquids, such as vases, on this
device.
• To turn this device off entirely, you must disconnect its AC
plug from the wall outlet. Consequently, the plug and AC
wall outlet must be readily accessible at all times.
• Only connect this device to an AC outlet that has a
protective grounding connection.
• Toprevent electric shock, match the wide blade of the
plug to the wide slot in the wall outlet. Fully insert the plug
into the wall outlet.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
This symbol indicates important instructions
accompanying the product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
• INVISIBLE
LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and
televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorienting or relocating the receivingantenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician for help.
CAUTION : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user’s
authority to operate it.
2
English
MX-F830B-ZA-ENG-0228.indd 2
2013-3-13 16:29:13
Important Safety Instructions
1).
Read these instructions.
2).
Keep these Instructions.
3).
Heed all warnings.
4).
Follow all instructions.
5).
Do not use this apparatus near water.
6).
Clean only with dry cloth.
7).
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8).
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9).
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10). Protect the power cord from being walked on or pinched particularly at plugs, near wall outlets, and the
point where they exit from the apparatus.
11). Only use attachments and accessories specified by the manufacturer.
12). Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13). Unplug this apparatus during lightning storms or when unused for long periods of
time.
14). Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as when the power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
Accessories
Check for the supplied accessories below.
FM Antenna
(AH42-00021A)
User's Manual
(AH68-02605M)
Remote Control/Batteries
(AH59-02554A/4301-000116)
Toroidal Ferrite core ( 1 EA) (3301-000144)
(For Power cable) (Optional)
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
English
MX-F830B-ZA-ENG-0228.indd 3
2
3
2013-3-13 16:29:15
Precautions
• Ensure that the AC power in yourhouse matches the
requirements listed on the identificationsticker located on
the back of your product.
• Do not place the product on amplifiers or other equipment
which may become hot. Make sure the ventilation slots are
not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert Slot is empty.
• To turn off the productcompletely, disconnect the AC plug
from the walloutlet. Disconnect the AC plug from the wall
outlet if you will leave the device unused for a long period
of time.
• During thunderstorms, disconnect the AC plug from the wall
outlet. Voltage peaks due to lightning could damage the
product.
• Do not expose the product to direct sunlight or other heat
sources. This could cause the product to overheat and
malfunction.
• Protect the product from moistureand excess heat and
equipment creating strong magnetic or electric fields (i.e.
speakers.).
• Disconnect the power cable from the AC wall outlet if the product malfunctions. • This product is for personal use only. It is not intended for
industrial use.
• Condensation may occur if your product or a disc has been
stored in cold temperatures. If transporting the product
during the winter, wait approximately 2 hours until the
product has reached room temperature before using.
• The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.
• Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.
• Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.
• Direct the loudspeakers towards the listening area.
Disc Storage
• Do not keep in direct sunlight.
• Keep in a cool, ventilated area.
• Keep in a clean, protective jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not use cracked or scratched discs.
Handling and Storing Discs
If you get fingerprints or dirt on a disc, clean it with a mild
detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the outside of
the disc
• Condensation may form if warm air comes into contact
with cold parts inside the product. When condensation
forms inside the product, it may not operate correctly. If this
occurs, remove the disc and let the product stand for 1 or 2
hours with the power on.
Disc Types And Disc Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80 minutes as they
may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If
the session is closed but the disc is left open, you may not
be able to play the disc fully.
CD-R MP3 Discs
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture
quality or cause skipping.
Be especially careful not to scratch discs when handling
them.
Holding discs
• Do not touch the playback side of the disc.
• Hold the disc by the edges so that fingerprints will not get
on the surface.
• Do not stick paper or tape on the disc.
4
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format
can be played.
• MP3 file names should contain no blank spaces or special
characters (. / = +).
• Use discs recorded with a compression/decompression
data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be
played.
• Only consecutively written multisession discs can be
played. If there is a blank segment ina Multisession disc,
the disc can be played only up to the blank segment.
• If a disc is not closed, it will take longer to begin playback
and not all of the recorded files may be played.
• For files encoded in Variable Bitrate (VBR) format, i.e. files
encoded in both low Bitrate and high Bitrate (e.g., 32Kbps
~ 320Kbps), the sound may skip during playback.
• A maximum of 999 tracks can be played per CD.
• Supported Audio Formats: WMA 56~128kbps Bitrate.
English
MX-F830B-ZA-ENG-0228.indd 4
2013-3-13 16:29:15
Contents
Thank you for buying this SAMSUNG mini-compact system.
Please take time to read these instructions.
They will allow you to operate your system with ease and take full advantage of its features.
Safety Warnings........................................ 2
To delete a file.................................... 11
Important Safety Instructions.................. 3
To skip 10 tracks................................ 11
Accessories............................................... 3
Using Bluetooth...................................... 12
Precautions............................................... 4
Setting the Clock.................................... 13
Cautions on Handling and
Timer Function........................................ 13
Storing Discs............................................. 4
Cancelling the Timer............................... 13
Disc Types And Disc Format.................... 4
Listening to Radio................................... 14
Contents.................................................... 5
Selecting a Stored Station...................... 14
Description................................................ 6
Recording Function................................ 14
Front Panel........................................... 6
Recording Speed.................................... 15
Rear Panel............................................ 7
GIGA SOUND function............................ 15
Remote Control................................... 8
Selecting EQ Mode................................ 15
Attaching the toroidal ferrite core to
the Power cable (optional)....................... 8
Selecting USER EQ Mode..................... 15
Display function........................................ 8
Using the FOOTBALL MODE................. 16
CD/MP3/WMA-CD Playback................... 9
Party function.......................................... 16
Selecting a Track....................................... 9
Connecting a Microphone...................... 16
Searching for a Specific Music
Troubleshooting...................................... 16
Passage on a CD...................................... 9
Specifications.......................................... 17
Selecting LOCAL EQ Mode................... 15
Repeat One or All Tracks on a
Compact Disc........................................... 9
A-B Repeat Playback............................. 10
10 Skip Function..................................... 10
CD Programming.................................... 10
Checking or Editing the
Programmed Tracks............................... 10
Auto Change function............................. 10
Playing a USB Device............................. 11
To Select a Track from
a USB Device..................................... 11
To Search a Folder Quickly............... 11
To Use High Speed Search............... 11
To repeat............................................ 11
Symbols
Important
Note
English
MX-F830B-ZA-ENG-0228.indd 5
4
5
2013-3-13 16:29:16
Description
Front Panel
1
2
29
28
3
27
4
26
5
25
6
24
7
23
8
22
9
10
21
11
20
12
19
13
14
15
18
17
16
1.
POWER button
• Press this button to switch your mini-compact system.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
PARTY button
AUTO CHANGE button
MASTER VOLUME button
EQ button
Search/Skip button
STOP/Tuning Mode button
RETURN button
DELETE button
USB 1/USB 2 button
MP3/CD button
TUNER/AUX button
USB 1 jack
MIC jack
Disc Tray
REC SPEED
6
English
MX-F830B-ZA-ENG-0228.indd 6
17. AUX IN 1 jack
Connecting an External Component such as an MP3
player.
• Connect AUX IN 1 on the front panel of the MINI
COMPACT to the Audio Out of the external component/
MP3 player.
• Press the TUNER/AUX button to select the AUX 1 input.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
USB 2 REC jack
USB 2 REC button
OPEN/CLOSE button
BLUETOOTH button
ENTER button
PLAY/PAUSE button
Search/Skip button
USER EQ button
Window display
LOCAL EQ button FOOTBALL MODE button
GIGA SOUND BLAST button
2013-3-13 16:29:18
Rear Panel
1
2
3
4
5
6
1. Cooling fan
• The fan always turns when the power is on.
Provide a minimum of 6 inches (15 cm) of clear
space on all sides of the fan when you install the
product.
2. 2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on the
rear of the system.
1. To achieve the correct sound quality, insert the
speaker connector cables identified below into the
correct speaker terminals on the back of the system.
• Left speaker (marked L).
• Right speaker (marked R).
3. ONLY FOR SERVICE
• This jackis for service only. Please do not use.
• When the unit is in AUX mode, if none of the
buttons on the front panel are pushed for more
than 8 hours, the power will automatically turn off.
5. FM Antenna Connector Terminal
1. Connect the FM antenna (supplied) to the FM Antenna
jack.
2. Slowly move the antenna wire until you find a location
where reception is good, then fasten it to a wall or
other rigid surface.
3. If reception is poor, you may need to install an outdoor
antenna. To do so, connect an outdoor FM antenna to
FM antenna jack on the rear of the system using a
75Ω coaxial cable (not supplied).
6. LED Terminals for the Front Speakers
To enjoy the special light effect of the speakers, connect
the LED cables of the Front Speakers to the LED
terminals of the system.
4. AUX IN 2 Terminals
1. Use an Audio Cable (not supplied) to connect AUX IN
2 on the product to Audio Out on an external analog
component.
• Be sure to match connector colors.
• If the external analog component has only one
Audio Out jack, connect to either the left or right
terminal.
• Press the TUNER/AUX button to select the AUX 2
input.
English
MX-F830B-ZA-ENG-0228.indd 7
6
7
2013-3-13 16:29:19
Remote Control
33
1
2
3
32
TUNER/AUX
31
1.
2.
3.
4.
POWER
TUNER/AUX
USB
Number(0~9) button
• During playback,
press the desired
track number.
The selected
track is played.
4
5
6
30
29
7
8
9
10
11
12
13
14
15
16
17
18
28
27
26
25
24
23
22
21
20
19
5.
6.
7.
8.
9.
10.
11.
-10
Skip
STOP
PLAY
REPEAT
GIGA
ENTER
`` Match the “+” and “–” ends of the
batteries with the diagram inside the
battery compartment.
`` Always replace both batteries at the same
time.
`` Do not expose the batteries to heat or a
flame.
`` The remote control can be used up to
approximately 23 feet (7 meters) in a
straight line from the system.
If you attach a Toroidal ferrite core to the Power
cable, it will help to prevent RF interference from
radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open
it.
2. Attach the Toroidal ferrite core to the Power cable
as shown and press it until it clicks.
Installing Toroidal ferrite to Power cable
Lift up to release the lock and open the core.
8
18.
19.
20.
21.
22.
23.
VOLUME TUNING/ALBUM .
TUNING MODE
TIMER ON/OFF
TIMER SET
SLEEP
• Set a sleep time
to shut off the
product.
MY KARAOKE
MIC VOLUME -, +
USB REC
DELETE
CD REC SPEED, MO/ST
VOLUME +
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
TUNING/ALBUM ,
EQ
AUTO CHANGE
REPEAT A-B
PAUSE
SEARCH
+10
CD
DISPLAY
MUTE
• Turn off
the sound
temporarily.
Installing batteries in the Remote Control
Attaching the toroidal ferrite core to
the Power cable (optional)
Press to lock it back
12.
13.
14.
15.
16.
17.
* Battery size: AAA
Display function
Lets you view all functions available on the display
and adjust the brightness of the display/LED.
Each time you press the DISPLAY button on the
remote control, the display mode will change as follows:
◆◆ The Demo function
All functions available on the system appear on the
front panel display.
◆◆ The Dimmer function
The Dimmer function is selected and the display
darkens.
◆◆ LED OFF
The LEDs are turned off. However, the dimmer
.
function continues to work.
◆◆ Clock ON
The Clock is displayed.
◆◆ LED/Display ON
The Display and all LEDs are turned on.
Make two rounds on the coil with the cable.
English
MX-F830B-ZA-ENG-0228.indd 8
2013-3-13 16:29:21
CD/MP3/WMA-CD Playback
Lets you play 5 inch compact discs without an adapter.
☛☛
This product is designed to play audio CDs, CDs, CD-Rs, CD-RWs, or MP3/WMA-CDs.
• Gently open or close the CD tray. Do not apply
excessive force.
• Do not apply force toor place a heavy object on the
product.
• Do not insert an out-of-spec. shapedCD such as a
heart or octangle shaped CD. You can damage the
product.
• For the best sound, maintain your compact discs
carefully and correctly.
1. Press
the OPEN/CLOSE button to open the disc tray.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the OPEN/CLOSE button to close the disc tray.
The disc will be played automatically.
• For MP3/WMA-CD audio, it may take several minutes
to finish scanning the disc tracks.
• If you play a file with an English name or a MP3/WMACD medium with anEnglish title, the song title will be
shown in the display. (Other languages besides English
may not be displayed.)
• An English-titled track containing a special character
will not display.
<CD/MP3/WMA-CD Playback Display>
Track Indicator
Playtime Indicator
4. A
djust the volume by:
• Tuning the VOLUME knob on the unit OR
• Pressing the Vol + or – button of the remote control.
The volume level can be adjusted in 31 steps (VOLUME
MIN, VOLUME 01 - VOLUME 29, and VOLUME MAX).
5. Main Unit
To pause playback temporarily, press the p button.
Press p again to continue playing the disc.
Remote control
To pause playback temporarily, press the PAUSE(#)
button.
Press the PLAY(+) button to continue playing the disc.
6. To end playing, press the STOP (@) button.
• If there is no CD inserted in the DISC tray, the unit displays “NO
DISC”.
• The quality of MP3/WMA-CD playback may vary depending
on the condition of the disc containing the music files or the
condition of the recorder with which the disc was created.
• If different types of files or unnecessary folders are on the same
disc, you will have problems with playback.
• Keep the tray closed whenever you are not using it to prevent
dust from entering.
• You can load or unload a compact disc when the radio, USB or
auxiliary source function is selected. Also, when you press the
OPEN/CLOSE button, the product will automatically change to
the MP3/CD mode.
• If no buttons are pressed on the product or remote control for
more than 3 minutes when the product is in Pause mode, the
product will change to Stop mode.
• If no buttons are pressed on the product or remote control for
more than 25 minutes when the product is in Stop mode or no
Disc mode, the power will automatically turn off.
Selecting a Track
You can select a desired track while a disc is
being played.
To play the previous track
Press the [ button within 3 seconds after the current
track starts playing.
Press the [ button twice, 3 seconds or more after
the current track starts playing.
To play the next track
Press the ] button.
To play the current track from the beginning
Press the [ button once, 3 seconds after the current
track starts playing.
To play the track of your choice
Press the [ or ] button to move to a desired track.
• You can also use the Number (0~9) buttons on
the remote control toselect a track.
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a specific music passage on a track.
To search
Press ...
Forwards
Backwards
)
(
You can also press and hold the [ or ] button on
the main unit to automatically scan for a track.
Repeat One or All Tracks on a
Compact Disc
You can play a CD, a group of tracks in a folder
(MP3 only), or a single track repeatedly:
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as follows:
MP3: OFF➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
CD: OFF➝ TRACK ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected
folder.
• ALL: Repeatedly plays the entire disc.
• RANDOM: Plays tracks in random order.
English
MX-F830B-ZA-ENG-0228.indd 9
8
9
2013-3-13 16:29:21
A-B Repeat Playback
You can repeatedly play back a designated section
of a CD.
1. Press the REPEAT A-B button at the beginning
of desired part.
• 'RPT A' will be displayed.
2. Press the REPEAT A-B button at the ending of
desired part.
• 'RPT AB' will be displayed.
3. To cancel REPEAT A-B function, press the
REPEAT A-B button again.
• 'OFF' will be displayed.
REPEAT A-B function is available only within a .
track.
➣➣
10 Skip Function
Press the +10 or -10 button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
CD Programming
This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
• However, you must stop playing the CD before
selecting tracks.
1. W
hile in CD playback mode, press the STOP(@)
button to stop playing the CD.
2. Press the ENTER (
) button to display the
message below:
(01= program number, --= track number)
3. Use the [ or ] button to move to a desired
track.
• Press [ to move to the previous track.
• Press ] to move to the next track.
4. Press the ENTER (
) button to confirm your
selection. The selection is stored and
is displayed.
5. To select additional tracks, repeat Steps 3 and
4.
6. Press the PLAY (+) button to play the
programmed tracks.
7. Press the STOP(@) button to stop playing the
programmed tracks, Press the STOP (@) button
again to cancel playing the programmed tracks.
• If you open the disc tray or turn off the
product, your programming will be canceled.
Program mode, if you press the USB REC
➣➣Inor CD
the AUTO CHANGE buttons, these functions
will not work, and the unit will display "PROG".
10
Checking or Editing the
Programmed Tracks
You can check a list of programmed tracks and
edit them as you want.
1. If a programmed track is being played, press the
STOP (@) button once.
2. Press the ENTER (
the message below:
) button twice to display
(C=Check, 01= program number)
➣➣If a total of 24 tracks are already programmed, “C” will be displayed rather
than “P” in the display.
3. Press the ENTER (
) button repeatedly until
the desired track is displayed.
4. Press the [ or ] button to select a different
track.
5. Press the ENTER (
selection.
) button to confirm your
6. To play the programmed tracks, press the
PLAY (+) button.
Auto Change Function
You can play a disc followed by a USB continuously.
1. Press the AUTO CHANGE button.
Each time you press this button, the mode will
switch as follows:
AUTO CHANGE ON ; AUTO CHANGE OFF
• When the auto change mode is "ON", the unit will play
the Disc ; USB 1 ; USB 2 continuously.
• When the auto change mode is "ON", if you press
the POWER button, FUNCTION button, or the
OPEN/CLOSE button, the auto change function
automatically switches to "OFF" mode.
• When the USB is playing, if you disconnected the
USB, the auto change function automatically switches
to "OFF" mode.
• When the auto change mode is "ON", the unit cannot
record.
• When the auto change mode is "ON", the REPEAT
and SLEEP functions automatically change to OFF.
• When the auto change mode is "ON", the CD REC
SPEED, USB 2 REC, REPEAT, PROGRAM, DELETE
and SLEEP functions do not work, and the unit
displays "AUTO CHANGE ON".
• When DISC play ends, if there's no USB 1, the unit
will play music from USB 2.
• When DISC play ends, if there's no USB 1 and USB 2,
the unit will continue to play the disc.
• When USB 2 play ends, if there's no DISC, the unit
will play music from USB 1.
English
MX-F830B-ZA-ENG-0228.indd 10
2013-3-13 16:29:23
Playing a USB Device
Connect an external storage device such as a USB
flash memory or external HDD (Hard Disk Drive)
to the product. You can play files in MP3/WMA
format.
Before you begin! • Connect the external USB storage device to your product.
• Select the USB mode by pressing the USB 1 or USB
2 button on the main unit or select USB 1 or USB 2 by
pressing the USB button on the remote control.
• The first track of the first directory plays automatically, and
the play order is as below:
If you select USB 1, USB 1 ➝ STOP.
If you select USB 2, USB 2 ➝ STOP.
➣➣To stop playing
Press the STOP ( @ ) button to stop playing.
➣➣To remove the USB device
If you press the STOP ( @ ) button once again,
you can remove the USB device safely.
Do not connect a USB recharger to the USB port
of this product. You can damage the product.
☛☛
To Select a Track from a USB Device
You can select an MP3 file during play.
f you want to move to the previous/next track, press
➣➣Ithe
[,] buttons briefly.
• The unit moves to the previous/next file within the
directory.
• If you press the [,] buttons more times than the
number of the files in the directory, the unit moves to
the next directory.
To Search a Folder Quickly
1. P
ress the TUNING/ALBUM button on the remote
control to move to the previous/next folder.
2. When the search is done, you will see the previous/
next folder name. The track will start playing.
To repeat
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the repeat
mode will change as follows:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function, press the
REPEAT button until "OFF" is displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
To Use High Speed Search
To delete a file
You can delete a file on your USB device.
1. Play a file you want to delete.
2. Press the DELETE button.
3. Press [ or ] to select YES.
• To cancel the selection, press the RETURN button on
the main unit.
4. Press the ENTER button on the remote control or the .
DELETE button.
The selected file will be deleted.
☛☛The NTFS file system is not supported.
To skip 10 tracks
Press the +10 or -10 button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
Read through the instructions below before using
a USB device with this unit.
• Some USB devices may not work properly with this
product.
• This product only supports external HDD's that are
formatted in the FAT file system.
• USB 2.0 HDD's should be connected to a separate
power source. Otherwise, the USB 2.0 HDD's will not
work.
• If a USB external storage device is connected to multiple
devices, only the MP3 files in the first HDD will be played.
• DRM-applied files are not supported. Digital Right
Management restricts unauthorized access to a DRM file
so that the copyright of the file is protected from piracy.
• Even if the extension of the file is .mp3, the file cannot be
played if it is formatted in MPEG layer 1 or 2.
• Do not use a USB hub. USB hubs are not supported.
• The unit displays only the first 15 characters of an MP3/
WMA file name.
• This device is designed to support removable HDDs with
less than 160GB. Depending on the device, a removable
HDD with 160GB or more may or may not be supported.
• It can take several minutes for the product to recognize
the files on a USB device.
• USB devices (particularly, USB HDDs) may cause a
delay when moving to the next track.
• With USB devices supporting only USB VER. 1.1, the
unit may access files slowly or may not recognize file
properties.
• In Stop mode, the product will turn off automatically if
there is no USB device connected to the USB jack for 25
minutes.
You can search the desired section quickly during
play.
the (,) button.
➣➣•Press
Each time you press the button, you will move
backward/forward fast.
☛☛Sound does not output in fast playback mode.
MX-F830B-ZA-ENG-0228.indd 11
English
10
11
2013-3-13 16:29:23
Using Bluetooth
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth technology lets Bluetooth-compliant devices
interconnect easily with each other using a short, wireless
connection.
• A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body comes into contact with the
receiving/transmitting system of the Bluetooth device or
the product.
- It is subject to electrical variation from obstructions
caused by a wall, corner, or by office partitioning.
- It is exposed to electrical interference from same
frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
• Keep the Mini-compact system and the Bluetooth device
close together when pairing. The greaterthe distance
between the system and Bluetooth device, the worse the
quality.
• If the distance exceeds the Bluetooth operational range, the
connection is lost.
• In poor reception-sensitivity areas, the Bluetooth connection
may not work properly.
• The Mini-compact system has an effective reception range
of up to 33 feet (10 meters) in all directions if there are no
obstacles. The connection will be automatically cut off if the
Bluetooth device moves out of this range. Even within range,
the sound quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric interference during
its operation.
To connect the product to a Bluetooth device
Before you begin, confirm that your Bluetooth device
supports the Bluetooth-compliant stereo headset
function.
1. Press the BLUETOOTH button on the main unit to
display the "BT" message.
• You will see “WAIT” for about 5 seconds and then
“READY” on the display.
2. Select the Bluetooth menu on the Bluetooth device you
want to connect. (Refer to the Bluetooth device's user's
manual.)
3. Select the Stereo headset menu on the Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] MINI XXXXXX " from the
searched list.
• When the product is connected to the Bluetooth
device, the product will display "CONNECTED"➞"BT"
on the front display, followed by the device name of the
connected Bluetooth device.
Bluetooth device over the product.
• In BLUETOOTH mode, some model's Play/Pause/
Repeat/Stop/Next/Back functions are not available.
• The product only supports Middle Quality SBC data (up
to 237kbps@48kHz), and does not support High Quality
SBC data (328kbps@44.1kHz).
• Only one Bluetooth device can be paired at a time.
• The Mini-compact system may not search or connect properly in the following cases:
- If there is a strong electrical field around the Minicompact system.
- If several Bluetooth devices are simultaneously paired
with the Mini-compact system.
- If the Bluetooth device is turned off, not in place, or
malfunctions
• Note that such devices as microwave ovens, wireless
LAN adaptors, fluorescent lights, and gas stoves use the
same frequency range as the Bluetooth device, which
can cause electric interference.
To disconnect the Bluetooth device from the
Product
You can disconnect the product from the Bluetooth
device. (Refer to the Bluetooth device's user's manual.)
• The product will be disconnected.
• When the product is disconnected from the
Bluetooth device, the product will display
"DISCONNECTED"➞"READY" on the front display.
To disconnect the Product from the Bluetooth
device
1. Press the BLUETOOTH button on the main unit to
display the "BT" message.
• Except when youdisconnect by changing functions,
the connected Bluetooth device will wait a certain
amount of time for a response from the product before
terminating the connection. (Disconnection time may
differ, depending on the Bluetooth device.)
• The currently connected device will be disconnected.
• In Bluetooth connection mode, the Bluetooth connection
will be lost if the distance between the product and the Bluetooth device exceeds the limit (33 ft./10 meters). If
the distance decreases to the effective range and you
restart the Bluetooth device, the Bluetooth connection
can be restored.
• If the Bluetooth device comes back into the effective
range, you can restart the product to restore the pairing
with the Bluetooth device.
• With some Bluetooth devices, some functions may not
work properly.
• In Bluetooth mode, the product will turn off automatically
if there is no Bluetooth device connected to the product
for 25 minutes.
5. Play music on the connected device.
• You can listen to the music playing on the connected
12
English
MX-F830B-ZA-ENG-0228.indd 12
2013-3-13 16:29:23
Setting the Clock
During each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
(
) button.
2. Press the TIMER SET button and then press the
ENTER (
) button. "CLOCK" is displayed.
3. Press the ENTER (
) button. The hour flashes.
• Increase the hours: ,
• Decrease the hours: .
4. When the correct hour is displayed, press the
ENTER (
) button. The minutes flash.
• Increase the minutes: ,
• Decrease the minutes: .
5. When the correct minute is displayed, press the
ENTER (
) button. " TIME" appears in the
display.
• The current time is now set.
• You can display the time, even when you are using
another function, by pressing the TIMER SET button
once.
• You can also use the ] or [ on the front panel
instead of the TUNING/ALBUM , or . button in
Steps 3 and 4.
Timer Function
Press the ENTER (
) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to set the minutes.
d Press the ENTER (
) button.
Result: V
OL XX is displayed, where XX corresponds to the volume already set.
6. Press the TUNING/ALBUM , or . button to adjust
b
the volume level and press the ENTER (
)button.
Result: The source to be selected is displayed.
7. Press the TUNING/ALBUM , or . button to select
the desired source to be played when the system
switches on.
If you select...
P ress the ENTER (
a
) button.
b Select a preset station by pressing
the TUNING/ALBUM , or .
button.
CD/MP3 (compact disc) Load one compact disc.
USB
Connect the USB device.
8. Press the ENTER (
) button.
Result: CHKREC (Do you want to record?) is displayed.
9. Press the ENTER (
) button.
Result: REC N is displayed, you can press the TUNING/ALBUM , or . button to select the REC Y or
REC N, and then press ENTER (
) button.
1)If you select the REC N, it will cancel tuner timer
recording even if you have already set the tuner timer
recording.
2)If you select the REC Y, you can set the tuner timer
recording.
a.Press the ENTER (
) button.
Result: ON is displayed for a few seconds. You can
set the tuner timer recording switch-on time.
b.Press the ENTER (
) button.
Result: OFF is displayed for a few seconds. You can
set the tuner timer recording switch-off time.
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, check that the current time
is correct.
• During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
• If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
• The maximum tuner timer recording time is 5 hours.
• If the timer switch on and off times are identical, the word ERROR
is displayed.
• If there is no disc or usb, when you select the “CD, USB, it will
automatically change to “TUNER”.
• You may use the ], [ buttons on the main unit instead of the
TUNING/ALBUM , or . button to adjust in Steps 4 through 9.
• If the switch-on or -off time is the same as the timer recording time, only the switch-on or -off time is effective, and the timer
recording time is not applied.
• If the auto timer is turned on, the MP3/CD or USB function may
require an additional step to be activated depending on the disc (or
device). It is better for you to select the tuner function instead.
Example: You want to wake up to music every morning.
1. Switch the system on by pressing the POWER (
)
button.
2. Press the TIMER SET button until TIME is displayed.
3. Press the ENTER (
) button.
Result: ON is displayed for a few seconds. You can
set the timer switch-on time.
4. Set the timer switch-on time.
a
b
c
d
ress the TUNING/ALBUM , or . button to P
set the hours.
Press the ENTER (
) button.
Result: The minutes flash.
Press the TUNING/ALBUM , or . button to set the minutes.
Press the ENTER (
) button.
Result: O
FF is displayed for a few seconds. You can
now set the timer switch-off time.
5. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to set the hours.
You must also...
FM (radio)
Cancelling the Timer
After you have set the timer, the unit will start automatically at the time shown by the TIMER indication
on the display. If you no longer want to use the timer,
you must cancel it.
To
Press the TIMER ON/OFF button....
Cancel the timer Once. Result:
Restart the timer Twice. Result:
is no longer displayed.
is displayed again.
• When you select the TIMER OFF mode, the TIMER
RECORDING and TIME function are not available. English
MX-F830B-ZA-ENG-0228.indd 13
12
13
2013-3-13 16:29:26
Listening to Radio
You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX button.
2.
To search for
a station
Press the TUNING MODE button
Manually
One or more times until MANUAL is
displayed. You can search the frequencies one by one in the Manual mode.
3. Select the station to be stored by:
• Pressing and holding the TUNING/ALBUM , or .
button on the remote control to automatically search
for active broadcasting stations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
• This applies only when listening to an FM station. 5. If you do not want to store the radio station found,
return to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the remote control to select a Preset number.
c. Press the ENTER button to save the preset.
6. To store additional radio frequencies, repeat Steps 3
through 5.
mode
➣➣In• Tuner
In the Manual mode, you can use the [ or ] button
on the main unit to manually search for a radio station.
• In the Preset mode, you can use the [ or ] button
on the main unit to search for a stored radio station.
Selecting a Stored Station
You can listen to a stored radio station.
1. Select FM by pressing the TUNER/AUX button.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. P
ress the [ or ] button on the main unit or the
TUNING/ALBUM , or . on the remote control to
select a desired preset number.
Recording Function
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. C
onnect an external USB storage device to the
USB 2 (
) jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the MP3/CD button on the main unit to select
the CD function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use the CD selection ( [ or ] ) buttons to select the
desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to your
product.
• Press the TUNER/AUX button to select <AUX> input.
• Play a song from the external device.
USB 1
• Connect a USB device to USB 1 jack of your product
• Press the USB 1 button to select USB 1.
• Play a song from USB 1.
3. P
ress the USB REC button on the remote control or the
USB 2 REC button on the main unit to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button on the remote
control or press and hold the USB 2 REC button on
the main unit to start recording all tracks on the disc.
"FULL CD RECORDING" is displayed.
MP3-CD, USB 1
• Press the USB REC button. The currently playing file
is copied onto the USB device.
• Press and hold the USB REC button. All the files of
the current folder are copied onto the USB device.
• If you connect a microphone and press the USB REC
button, the currently playing file and the sound from the
microphone is recorded onto the USB device.
MP3 RECORDING: "MP3 RECORDING""RECORD"
CD COPY: “CHECK”“START”“COPY XX”“COPY END”
is displayed. When the recording is done, “STOP” will
be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORD is displayed.
4. T
o stop recording, press the STOP (@) button. The
unit automatically creates and saves recorded files
in .MP3 format (SAM-XXXX.MP3).
5. To remove the USB device safely, press the STOP (@) button once again. After recording, a directory named
14
English
MX-F830B-ZA-ENG-0228.indd 14
“RECORDING(DISCxxxx)”(FULL CD RECORDING),
“RECORDING”(TRACK RECORDING), “CD
COPY”(MP3 CD/USB), “MP3 RECORDING”(MP3 CD),
“TUNER RECORDING” or “AUX RECORDING” is
created on your USB device.
2013-3-13 16:29:27
• Do not disconnect the USB device or the AC Cord during
recording as this may cause damage to the file.
• WMA/MP2 files can be copied but not recorded.
• If you disconnected the USB device during a recording,
the main unit powers off and you will not be able to delete
the recorded file from your USB device. If this occurs,
please connect the USB device to a PC, backup the USB
data to the PC, and then format the USB device.
• When the USB memory has insufficient free space, the
system will display “NOT ENOUGH MEMORY”.
• The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system is
not supported.
• When you use the CD high speed search function, CD
recording is not available.
• The recording time may be longer with some USB devices.
• In the program mode, you can't use the CD recording
function.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
• The GIGA SOUND function is set to "OFF" automatically
and is not available during a CD recording.
• The REPEAT function is set to "OFF" automatically and is
not available during a CD recording.
• If you use the MIC function during a CD recording, the
voice from the microphone will be recorded.
• You can not record the radio when searching or when no
available station is found in the Tuner mode.
• Note that setting the input level too loud when recording
music from an external device through the AUX or USB
channel may cause noise in the recording. If this occurs,
lower the external device’s volume level.
• The maximum TUNER/AUX recording time is 5 hours.
Recording Speed
You can select the recording speed before recording.
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as follows:
RECORD SPD X 1 ; RECORD SPD X 4
• When you record from the tuner or an external source, you
cannot change the recording speed.
• If you select RECORD SPD X 4, sound is not produced during
the recording.
• If you connected the microphone, you have one recording
speed mode available: RECORD SPD X 1.
• During recording, if you disconnect the microphone, the
recording will stop. If you reconnect the microphone, the
recording will not restart.
GIGA SOUND function
The GIGA SOUND function amplifies the bass
sound and provides twice the bass for powerful,
realistic sound.
1. P
ress the GIGA SOUND BLAST button on the
main unit or the GIGA button on the remote control.
Each time you press this button, the sound switches
as follows:
OFF ; GIGA SOUND BLAST
2. To cancel this function, press the GIGA SOUND
BLAST button until “OFF” is displayed.
• The GIGA SOUND mode may be different depending
on your region.
Selecting EQ Mode
Your mini-compact system provides predefined
equalizer settings that are optimized for particular
music genre. You can also adjust the bass, middle
and treble levels manually.
1. Press the EQ button.
Each time you press this button, the sound mode will .
change as follows:
OFF;FLAT;RANCHERA;SAMBA;CUMBIA
;HABANERA;BOOMBA;REGGAE;MERENGUE
;SALSA;PARTY;POP;HIP HOP;ROCK;JAZZ
;CLASSIC;ELECTRONIC;MP3 ENHANCER
;VIRTUAL SOUND;U B 0
2. To set the BASS, MIDDLE, TREBLE level manually:
Press the ENTER button when you select U B 0.
Result: The BASS level flashes.
Press the TUNING/ALBUM , or . button to select a level
from -06 to 06.
Press the ENTER button.
Result: The MIDDLE level flashes.
Press the TUNING/ALBUM , or . button to select a level
from -06 to 06.
Press the ENTER button.
Result: The TREBLE level flashes.
Press the TUNING/ALBUM , or . button to select a level
from -06 to 06.
Press the ENTER button.
Result: setting is complete.
• The equalizer is set to "OFF" automatically and is not available
during a CD recording.
• If no buttons are pressed within 4 seconds, your settings will
automatically be cancelled and the previous settings will be saved.
• The equalizer mode may be different depending on your region.
Selecting USER EQ Mode
You can directly select the user EQ mode by
pressing the USER EQ button.
1. Press
the USER EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode will switch as follows: OFF ; U B 0
2. Refer to Step 2 above to set the BASS, MIDDLE,
TREBLE level.
• The equalizer is set to "OFF" automatically and is not available
during a CD recording.
• If no buttons are pressed within 4 seconds, your settings will
automatically be cancelled and the previous settings will be saved.
• The equalizer mode may be different depending on your region.
Selecting LOCAL EQ Mode
You can directly select the LOCAL EQ mode by
pressing the LOCAL EQ button.
1. Press
the LOCAL EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode will switch as follows:
OFF;FLAT;RANCHERA;SAMBA;CUMBIA
;HABANERA;BOOMBA;REGGAE;MERENGUE
;SALSA
• The Local equalizer is set to "OFF" automatically and is not
available during a CD recording.
• If no buttons are pressed within 4 seconds, your settings will
automatically be cancelled and the previous settings will be saved.
• The equalizer mode may be different depending on your region.
English
MX-F830B-ZA-ENG-0228.indd 15
14
15
2013-3-13 16:29:27
Using the FOOTBALL MODE
The football mode brightens the audio you are listening to and brings greater realism to sports
broadcasts.
1. Press the FOOTBALL MODE button on the main unit.
Each time you press this button, the sound mode
switches as follows:
OFF ; FOOTBALL MODE 1 ; FOOTBALL MODE 2
2. To cancel this function, press the FOOTBALL
MODE button until “OFF” is displayed.
Party function
You can choose a desired party mode.
1. P
ress the PARTY button. Each time press this
button, the party mode will switch as following:
PARTY 1 ; PARTY 2 ; PARTY 3 ; OFF
• The FOOTBALL MODE may be different depending
on your region.
Connecting a Microphone
You can insert a microphone to sing along with your favorite CDs.
1. Connect a mono microphone (3.5ø) to the MIC jack on the front of the product.
2. Press the MIC VOL-, + button to adjust the volume of the microphone.
3. Press the MY KARAOKE button to turn My Karaoke on and off. Each time the button is pressed, the selection
changes as follows: ON ➞ OFF.
`` If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away from the
speakers. Turning down the microphone's volume or the speaker volume is also effective.
`` The microphone does not operate in the AUX or TUNER modes.
`` If you connect a microphone, GIGA SOUND will automatically turn off. When you remove the microphone, it will remain off, You
must turn it on again manually.
`` When My Karaoke is on, EQ/LOCAL EQ/USER EQ/FOOTBALL MODE/GIGA SOUND do not work.
`` The system does not retain the My Karaoke setting after you turn My Karaoke off.
`` Use a mono microphone. If you connect a stereo microphone to the unit, the microphone might not work properly.
`` The MY KARAOKE function is available only when you have connected a Microphone to the unit.
Troubleshooting
Refer to the chart below if this unit does not function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help, turn off the unit, disconnect the power cord,
and contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
I cannot eject the disc.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback and slow playback.
• Are the speakers connected properly?
• Is the disc severely damaged?
The remote control does not work.
• Is the remote control being operated within its operational angle and
distance range?
• Are the batteries drained?
•Reset the unit: With no disc inserted and the “NO DISC” message on the
• The product is not working.
display of the product, press and hold the STOP (@) button on the main
(Example: The power goes out or
unit for longer than 5 seconds. the front panel key doesn't work or
or you hear a strange noise.)
Using the RESET function will erase all stored settings.
• The product is not working normally. Do not use this unless necessary.
• Is the antenna connected properly?
Can't receive radio broadcast.
• If the antenna's input signal is weak, install an external FM antenna in an area
with good reception.
16
English
MX-F830B-ZA-ENG-0228.indd 16
2013-3-13 16:29:28
Specifications
General
FM Tuner
CD Disc
Power Requirements
Power Consumption (MX-F830B)
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
CD : 5 inches (COMPACT DISC)
AC 120V~60Hz
140 W
8.60 lbs
9.17 (W) x 13.82 (H) x 11.81 (D) inches
+41°F~+95°F
10 % to 75 %
55 dB
12 dB
0.6 %
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
MX-F830B- 1000 Watts (RMS)
Front speaker output
Amplifier
500 W/CH (6 Ω/100 Hz)
Frequency range
20 Hz~20 KHz
S/N Ratio
75 dB
Channel separation
50 dB
Input sensitivity
(AUX) 800 mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
Important Note About Service
• An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product.
b. You bring the unit to a repair center and there is no defect in the product
• You will be advised of the amount of such an administration charge before any work or home visit
is carried out.
• If you have a problem with this product, we strongly recommend you read the appropriate section
of this manual, review the Troubleshooting section on page 16, visit the Support page for your
product at www.samsung.com, and call Samsung Product Support (1-800-726-7864) to find an
answer before you contact a service center for a repair.
English
MX-F830B-ZA-ENG-0228.indd 17
16
17
2013-3-13 16:29:28
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the
original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for
a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the
product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products
become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in
the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to
the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for
which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse,
neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies,
accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or
which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer
adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered
and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise,
echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free
operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS
OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT
THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO
PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE,
MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF
SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
MX-F830B-ZA-ENG-0228.indd 18
2013-3-13 16:29:28
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
U.S.A
1-800-SAMSUNG
(726-7864)
www.samsung.com
Samsung Electronics America, Inc. 85
Challenger Road Ridgefield Park, NJ 07660
Code No. AH68-02605M (Rev 0.0)
MX-F830B-ZA-ENG-0228.indd 19
2013-3-13 16:29:28