Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
DTM3155
Contents
1 Safety and Notice
2
Safety2
Notice3
2 Your Micro System
4
Introduction4
What's in the box
4
Overview of the main unit
5
3 Get started
Connect power
Prepare the remote control
Set clock
Store radio stations automatically
Turn on
Demonstrate the unit's features
7
7
8
8
8
9
9
4Play
10
10
11
11
5 Play iPod/iPhone
12
12
12
13
6 Listen to radio
14
14
14
14
14
14
15
Play a disc
Play from USB
Play from a Bluetooth device
Compatible iPod/iPhone
Play an iPod/iPhone
Charge the iPod/iPhone
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
Select stereo/mono broadcast
Show RDS information
7 Adjust sound
15
15
15
15
8 Other features
16
16
16
17
17
Adjust volume
Select a preset sound effect
Mute sound
Set the sleep timer
Set the alarm timer
Play from external audio device
Adjust display brightness
9 Product information
18
Specifications
18
USB playability information
19
Supported MP3 disc formats
19
Maintenance19
10Troubleshooting
20
EN
1
1 Safety and
Notice
Read and understand all instructions before you
use this product. If damage is caused by failure
to follow the instructions, the warranty does
not apply.
Safety
Safety
Warning
•• Never remove the casing of this apparatus.
•• Never lubricate any part of this apparatus.
•• Never look into the laser beam inside this apparatus.
•• Never place this apparatus on other electrical
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
equipment.
•• Keep this apparatus away from direct sunlight, naked
flames or heat.
•• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
•
•
•
•
•
The device shall not exposed to dripping
or splashing.
Do no place any source of danger on the
device (e.g. liquid filled objects. lit candles).
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Make sure that there is enough free space
around the product for ventilation.
Only use attachments/accessories specified
by the manufacturer.
Care of the environment
2
EN
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Compliance
This product complies with the requirement of
the 1999/5/EC directive.
A copy of EC declaration of Conformity is
available in the Portable Document Format
(PDF) version of the user manual at www.
philips.com/support.
This apparatus includes this label:
Note
•• The type plate is located on the bottom of the
apparatus.
Notice
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
“Made for iPod,” and “Made for iPhone,”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone, respectively, and has been certified by
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
© 2013 CSR plc and its group companies.
The aptX® mark and the aptX logo are
trade marks of CSR plc or one of its group
companies and may be registered in one or
more jurisdictions.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
EN
3
2 Your Micro
System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from disc,
USB mass storage devices, iPod/iPhone, and
other external devices, Bluetooth devices, or
listen to radio stations.
The unit supports the following media formats:
4
EN
What's in the box
Check and identify the contents of your
package:
• Main unit
• Remote control
• 1 x AAA battery
• AC power cable
• Short user manual
• Safety & Notice sheet
Overview of the main unit
m
a
b
c
d
e
f
g
h
l
k
j
i
o
n
a AUDIO IN
• Connect an external audio device.
b Dock for iPod/iPhone
c Disc compartment
d
• Turn on the unit, switch to Standby
mode, or switch to Eco Power mode.
i LED indicator
• Light up orange when the the unit is in
Eco Power mode.
• In BT mode, flash blue when
the Bluetooth-enabled device is
disconnected.
• In BT mode, light up blue when the
Bluetooth-enabled device is connected.
j
e SRC
• Select a source: DISC, USB, TUNER,
iPod_iPhone, BT or AUDIO IN.
f
g
h
/
• Skip to the previous/next track.
• Tune to a radio station.
• Press and hold the key to search within
a track/disc/USB/iPod/iPhone.
• Eject the disc.
k Display panel
• Show the current status.
•
•
•
•
Stop play.
Erase a program.
Access the iPod/iPhone menu.
In standby mode, turn on/off feature
demonstration.
• In BT mode, press and hold to clear BT
paring history.
l VOL -/+
• Adjust volume.
• Adjust time.
• Start or pause play.
o FM AERIAL
m
• USB socket.
n AC ~ MAINS
• Power supply socket.
EN
5
f
Overview of the remote control
a
b
c
d
r
e
g
q
h
p
i
j
j SOUND
• Select a preset sound setting.
n
m
l
k CLOCK
• Set clock in standby mode.
• Display the time in any source mode.
l SLEEP/TIMER
• Set the sleep timer.
• Set the alarm timer.
• Turn on the unit, or switch to Standby
mode, or switch to Eco Power mode.
• Eject the disc
c DOCK/
• Select the iPod_iPhone source.
• Select the Bluetooth source.
d CD/FM
• Select the disc source.
• Select the FM radio source.
e OK
• Confirm a selection.
• Switch between STEREO and MONO
in tuner source.
6
i MUTE
• Mute or restore volume.
o
k
b
g PRESET/ALBUM /
• Skip to the previous/next album.
• Select a preset radio station.
• Navigate through the iPod/iPhone
menu.
• Adjust time.
h VOL -/+
• Adjust volume.
• Adjust time.
f
a
/
• Skip to the previous/next track.
• Tune to a radio station.
• Press and hold the key to search within
a track/disc/USB/iPod/iPhone.
EN
m REPEAT/SHUFFLE
• Select the repeat play mode.
• Select the random play mode except
in ipod_iphone and BT source.
n PROG
• Program tracks in disc/USB source.
• Program radio stations.
o RDS/DISPLAY
• Select RDS broadcast information.
• Synchronize clock with RDS station.
• Select display information during play.
• Adjust display brightness in standby
mode.
p
• Start or pause play.
q
/MENU
Stop play.
Erase a program.
Access the iPod/iPhone menu.
In standby mode, turn on/off feature
demonstration.
• In BT mode, press and hold to clear BT
paring history.
•
•
•
•
r USB/AUDIO IN
• Select the USB source.
• Select an external audio device source.
3 Get started
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
•• Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the unit.
•• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•• Before connecting the AC power cord, ensure you have
completed all other connections.
Connect the power cord to:
• the AC ~ MAINS socket on the main
unit.
• the wall outlet.
EN
7
Prepare the remote control
Set clock
Caution
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
To insert the remote control battery:
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert 1 AAA battery with correct polarity
(+/-) as indicated.
Note
•• You can set the clock in standby mode only.
1
In standby mode, press and hold CLOCK
to activate the clock setting mode.
2
Press PRESET/ALBUM /
hour or 24 hour format.
3
Press CLOCK to confirm.
»» The hour digits begin to blink.
4
Press PRESET/ALBUM
hour.
5
Press CLOCK to confirm.
»» The minute digits begin to blink.
6
Press PRESET/ALBUM
minute.
7
Press CLOCK to confirm.
/
/
to select 12
to set the
to set the
Note
•• You can also press VOL -/+ on remote control or main
unit to set hour format/hour/minute.
•• To exit clock setting mode without storing, press
/MENU.
•• If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•• You can press CLOCK to view the clock in any source
mode.
Note
•• If you are not going to use the remote control for a
long time, remove the battery.
•• Batteries contain chemical substances, so they should
be disposed of properly.
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
8
EN
Turn on the unit.
2
3
Press SRC to select TUNER source.
»» [AUTO INSTALL -- PRESS PLAY -STOP CANCEL] (press
to start
automatic installation, or press to
cancel) is displayed.
Press
.
»» The unit automatically stores radio
stations with sufficient signal strength.
»» After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
Turn on
•
Press .
»» The unit switches to the last selected
source.
Switch to standby
•
Press again to switch the unit to standby
mode.
»» The clock (if set) appears on the
display panel.
Tip
•• The power indicator lights up when the unit is in Eco
Power mode.
Demonstrate the unit's
features
•
In standby mode, press /MENU.
[WELCOME TO PHILIPS] (welcome to
Philips) scrolls from the right to the left on
the display, and then [DEMO ON] (demo
on) is displayed briefly.
»» This system's features are displayed
one by one.
• To turn off the demonstration, press
/MENU again.
Note
•• You can also press
on the main unit to turn on/ turn
off the demonstration.
Switch to ECO Power mode:
• Press and hold for more than three
seconds.
»» [ECOPOWER] (Eco Power) is
displayed briefly.
Tip
•• The unit switches to Eco Power mode after 15 minutes
in standby mode if no Apple device is docked to the
unit.
•• Press and hold cannot switch the unit to Eco standby
mode if there is Apple device docked to the unit.
•• Press and hold to switch the unit to standby mode if
the unit is in working mode.
Switch between standby mode and Eco Power
mode:
• In standby/Eco Power mode, press and
hold to switch the unit to Eco Power/
standby mode.
EN
9
4Play
Program tracks
Note
•• You can program tracks only when the play stops.
Play a disc
You can program a maximum of 20 tracks.
Caution
•• Do not insert disc of 8 cm diameter.
1
Press SRC repeatedly to select DISC
source.
2
Insert a disc with the printed side facing
frontward.
3
Play starts automatically. If not, press
.
Note
1
Press PROG to activate the program
mode.
»» [PROG] (program) is displayed.
2
For MP3/WMA tracks, press
PRESET/ALBUM / to select an album.
3
Press
/
to select a track, then press
PROG to confirm.
4
Repeat steps 2 to 3 to program more
tracks.
5
Press
to play the programmed tracks.
»» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press /MENU.
•• The docking system only supports disc of 12 cm
diameter.
Pause/resume play
•
During play, press
play.
Display play information
to pause/resume
•
Skip to a track
For CD:
• Press
/
to select another track.
For MP3 disc and USB:
1
Press PRESET/ALBUM
album or a folder.
2
Press
/
/
to select an
to select a track or a file.
1
2
During play, press and hold
10
EN
Release to resume normal play.
Select repeat/shuffle play options
1
Search within a track
/
.
During play, press RDS/DISPLAY
repeatedly to select different play
information.
• For CD: Lap time of the current track,
lap time remained of the current track,
lap time of all tracks, lap time remained
of all tracks.
• For MP3/WMA disc and USB: ID3
information, such as [TITLE] (title),
[ARTIST] (artist), [ALBUM] (album).
During play, press REPEAT/SHUFFLE
repeatedly to select a repeat option or the
shuffle play mode.
• REP: the current track is played
repeatedly.
• REP ALL: all tracks are played
repeatedly.
• REP ALB: all the tracks in the album
are played repeatedly.
• SHUF: all tracks are played randomly.
2
To resume normal play, press REPEAT/
SHUFFLE repeatedly until no option is
displayed.
Play from USB
Note
•• Make sure that the USB device contains playable audio
content.
1
Insert the USB mass storage device into
the
socket.
Note
•• Before you connect a Bluetooth device to the unit,
familiarize yourself with the Bluetooth capabilities of
the device.
•• Keep the unit away from other electronic devices that
may cause interference.
•• The effective operation range between the unit and the
paired device is approximately 10 meters (30 feet).
•• Any obstacle between the unit and the device can
reduce the operational range.
1
Press SOURCE repeatedly to select
Bluetooth source.
2
Activate the Bluetooth function on your
Bluetooth device (see the device user
manual).
3
Select "PHILIPS DTM3155" on your device
for pairing.
»» The LED indicator flashes.
»» [BT] displays on the screen.
• For some devices, you may need to
input "0000" as the pairing password.
2
4
After successful connection, the docking
system beeps twice and the LED indicator
lights up blue.
5
Start music play on your Bluetooth device.
Press SRC repeatedly to select the USB
source.
»» Play starts automatically. If not, press
.
• To select a folder, press PRESET/
ALBUM / .
• To select an audio file, press
/ .
Play from a Bluetooth device
You can listen to a Bluetooth device through
the unit.
EN
11
5 Play iPod/iPhone
When the iPod/iPhone is docked on the main
unit, you can listen to music from the speakers.
Compatible iPod/iPhone
PHILIPS
DTM3155
Apple iPod and iPhone models with a lightning
dock connector:
• iPod touch 5th generation
• iPod nano 7th generation
• iPhone 5
PIN
0000
Play an iPod/iPhone
1
Insert the iPod/iPhone in the dock. Press
SRC repeatedly to select iPod_iPhone
source.
2
Play music on iPod/iPhone.
• To resume/pause play, press
.
• To skip to a track, press
/ .
• To search during play, press and hold
/ , then release to resume
normal play.
Tip
•• If the unit switches from Bluetooth source to other
sources, the connected Bluetooth device disconnects
automatically.
•• The system can memorize up to 8 previously
connected Bluetooth devices.
To clear Bluetooth pairing history:
Press and hold .
»» The current Bluetooth connection is
disconnected.
»» The docking system beeps twice after
BT paring history is cleared successfully.
12
EN
• To navigate the menu, press /MENU,
and press PRESET/ALBUM / to
select an option, and then press OK to
confirm.
Tip
•• To search during play, you can also press and hold
on the main unit.
/
Charge the iPod/iPhone
When the docking system is power on, the
docked iPod/iPhone begins to charge.
Note
•• If the docking system goes to Eco power mode for
energy saving, press or press and hold to switch
the unit to standby mode first to make sure the docked
iPod/iPhone can charge normally.
EN
13
6 Listen to radio
Tip
•• For optimal reception, fully extend and adjust the
position of the antenna.
Tune to a radio station
1
Press SRC repeatedly to select the tuner
source.
2
Press and hold
/
for more than 2
seconds.
»» [SEARCH] (search) is displayed.
»» The radio tunes to a station with
strong reception automatically.
3
You can program a maximum of 20 preset
radio stations (FM).
1
2
Tune to a radio station.
3
Press PRESET/ALBUM / to allocate
a number to this radio station, then press
PROG to confirm.
4
Repeat the above steps to program other
stations.
Press PROG to activate program mode.
»» [PROG] (program) is displayed.
Tip
•• To overwrite a programmed station, store another
station in its place.
Repeat step 2 to tune to more stations.
Tip
•• To tune to a weak station, press
until you find optimal reception.
/
repeatedly
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
• In tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
»» [AUTO] (auto) is displayed.
»» All available stations are programmed
in the order of waveband reception
strength.
»» The first programmed radio station is
broadcast automatically.
14
Program radio stations
manually
EN
Select a preset radio station
•
In tuner mode, press PRESET/ALBUM
to select a preset number.
/
Tip
•• Position the antenna as far as possible from TV, VCR, or
other radiation source.
•• For optimal reception, fully extend and adjust the
position of the antenna.
Select stereo/mono broadcast
For stations with weak signals: to improve the
reception, change to monaural sound.
• In tuner source, press OK to select a
setting:
• [STEREO]: stereo broadcast.
• [MONO]: monaural broadcast.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
2
Tune to an RDS station.
Press RDS/DISPLAY repeatedly to scroll
through the following information (if
available):
»» Station name
»» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
»» RDS RT
»» RDS CLOCK
»» Frequency
7 Adjust sound
Adjust volume
•
Select a preset sound effect
•
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to a RDS radio station that transmits
time signals.
2
Press RDS/DISPLAY for over 2 seconds.
»» [CT SYNC] is displayed and the unit
reads RDS time automatically.
»» If no time signal is received, [NO CT]
is displayed.
During play, press VOL +/- to increase/
decrease the volume.
During play, press SOUND repeatedly to
select:
• [BALANCED] (balanced)
• [WARM] (warm)
• [BRIGHT] (bright)
• [POWERFUL] (powerful)
• [CLEAR] (clear)
Mute sound
•
During play, press MUTE to mute/unmute
sound.
Note
•• The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
EN
15
8 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
• When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
• [SLEEP OFF]
• [SLEEP -- 120]
• [SLEEP -- 90]
• [SLEEP -- 60]
• [SLEEP -- 45]
• [SLEEP -- 30]
• [SLEEP -- 15]
»» When sleep timer is activated, is
displayed.
To deactivate sleep timer
• Press SLEEP/TIMER repeatedly until
[SLEEP OFF] (sleep off) is displayed.
»» When sleep timer is deactivated,
disappears.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, USB,TUNER, iPod_iPhone or PLAYLIST is
activated to play at a preset time.
1
Press to switch the unit to standby
mode.
2
Make sure that you have set the clock
correctly.
3
Press and hold SLEEP/TIMER.
»» A prompt to select the source is
displayed.
16
EN
4
Press SRC repeatedly to select a source:
DISC, USB, TUNER, iPod_iPhone or
PLAYLIST.
5
Press SLEEP/TIMER to confirm.
»» The hour digits begin to blink.
6
Press PRESET/ALBUM
hour.
7
Press SLEEP/TIMER to confirm.
»» The minute digits begin to blink.
8
Press PRESET/ALBUM
minute.
9
Press SLEEP/TIMER to confirm.
»» The [VOL] (volume) begins to blink.
/
/
to set the
to set the
10 Press PRESET/ALBUM
/ to adjust
the volume, then press SLEEP/TIMER to
confirm.
»» The timer is set and activated.
Tip
•• For source selection, you can also press VOL -/+,
PRESET/ALBUM
/
on the remote control, or
VOL -/+ on the main unit.
•• For hour/minute/volume adjustment, you can also press
VOL -/+ on the remote control or the main unit.
Activate and deactivate the alarm
timer
1
Press to switch the unit to standby
mode.
2
Press SLEEP/TIMER repeatedly to activate
or deactivate the timer.
»» If the timer is activated, the display
shows .
»» If the timer is deactivated,
disappears on the display.
Note
•• In AUDIO IN mode, the alarm timer cannot be set.
•• If DISC/USB/Dock source is selected and the track
cannot be played, tuner is activated automatically.
•• If iPod/iPhone playlist is selected as the alarm source,
you need create a playlist called "PHILIPS" in your iPod/
iPhone.
•• If no playlist named “PHILIPS” exists in the iPod/iPhone
or the playlist includes no playable track, this product
switches the alarm source to iPod/iPhone library.
Play from external audio
device
3
Play the external audio device.
Adjust display brightness
Note
•• You can adjust the display brightness in standby mode
only.
In standby mode, press RDS/DISPLAY
repeatedly to adjust display brightness.
• Full brightness (100%)
• Half brightness (70%)
• Brightness low (40%)
You can play from an external audio device
such as MP3 player through this unit.
1
Connect the audio device.
Connect the AUDIO IN cable (not
supplied) to the AUDIO IN socket and to
the headphone socket on the audio device.
2
Press SRC to select AUDIO IN source.
EN
17
9Product
information
Sensitivity
Note
•• Product information is subject to change without prior
- Mono, 26dB S/N Ratio
< 22 dBf
- Stereo, 46dB S/N Ratio
Search Selectivity
Total Harmonic Distortion
Signal to Noise Ratio
< 43 dBf
< 28 dBf
< 2%
> 55 dB
notice.
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
Specifications
8 ohm
65 mm full range
>83dB/m/W
±4dB/m/W
Amplifier
Maximum Output Power
Frequency Response
Signal to Noise Ratio
Audio In Input
50W
45 Hz - 20 kHz,
± 3 dB
> 77 dBA
600mV RMS 22
k
Disc
Laser Type
Disc Diameter
Support disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
Signal to Noise Ratio
Semiconductor
12 cm
CD-DA, CD-R, CDRW, MP3-CD, WMACD
24 Bits / 44.1 kHz
< 0.8% (1 kHz)
4 Hz -20 kHz (44.1
kHz)
> 77 dBA
Tuner
Tuning Range
Tuning grid
Number of presets
18
EN
FM: 87.5 108 MHz
50 KHz
20
General information
AC power
Operation Power
Consumption
Eco Standby Power
Consumption
USB Direct
Dimensions
- Main Unit (W x H x D)
Weight
110-240V ~,
50/60Hz
25 W
< 0.5 W
Version 2.0HS
234 x 364
x 239 mm
2.5 kg
- Main Unit
Bluetooth
Standard
Frequency
band
Range
Bluetooth Standard Version
2.1+EDR
2.402~2.480 GHz ISM Band
10m (free space)
USB playability information
Compatible USB devices:
• USB flash memory (USB 1.1 and USB 2.0)
• USB flash players (USB 1.1 and USB 2.0)
• memory cards (requires an additional card
reader to work with this unit)
Supported formats:
• USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 to v2.3
• File name in Unicode UTF8 (maximum
length: 16 bytes)
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
Supported MP3 disc formats
•
•
•
•
•
ISO9660, Joliet
Maximum title number: 999 (depending on
file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
Supported Bit-rates: 32~320 (kbps),
variable bit rates
Maintenance
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
EN
19
10Troubleshooting
Warning
•• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this unit,
check the following points before requesting
service. If the problem remains unsolved, go to
the Philips web site (www.philips.com/support).
When you contact Philips, ensure that the unit
is nearby and the model number and serial
number are available.
No power
•• Ensure that the AC power cord of the unit
is connected properly.
•• Ensure that there is power at the AC
outlet.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•• Adjust the volume.
No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the unit again.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
•• Insert the battery with its polarities (+/–
signs) aligned as indicated.
•• Replace the battery.
20
EN
••
Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
•• Insert a disc.
•• Check if the disc is inserted upside down.
•• Wait until the moisture condensation at
the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•• Increase the distance between the unit and
your TV or VCR.
•• Connect an outdoor FM antenna instead.
Timer does not work
•• Set the clock correctly.
•• Switch on the timer.
Clock/timer setting erased
•• Power has been interrupted or the power
cord has been disconnected.
•• Reset the clock/timer.
Music playback unavailable after successful
connection
•• The Bluetooth-enabled device is
incompatible with the unit.
Bluetooth-enabled device connection error
•• The device does not support the profiles
required for the unit.
•• The unit already connected with another
Bluetooth-enabled device. Disconnect that
device or all other connected devices and
then try again.
The paired mobile phone connects and
disconnects constantly
•• The Bluetooth reception is poor. Move the
mobile phone closer to the unit or remove
any obstacle between the mobile phone
and the unit.
•• Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the unit.
•• For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the unit.
EN
21
22
EN
EN
23
Specifications are subject to change without notice
2013 © WOOX Innovations Limited. All rights reserved.
This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in
this document as WOOX Innovations, and is the manufacturer of the product. WOOX Innovations is the warrantor
in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.”
DTM3155_12_UM_V2.0