Digitus DA-70250 Installation guide

USB 3.0 HUB & GIGABIT

ETHERNET ADAPTER

Quick Installation Guide

DA-70250

INTRODUCTION

DA-70250 is an USB3.0 hub together with Gigabit Ethernet adapter as two in one product, which provides users to launch Internet with easy installation and lower power consumption via the USB interface as well as USB port expansion.

The adapter is compliant to USB3.0, which contribute to the high compatibility and hence strengthen the brilliant transfer performance.

The device is compatible to USB 3.0 and 2.0 / 1.1. In addition to complying with

802.3, 802.3u, 802.3ab and 802.3az standard, users are able to add networking compatibility to the computer in any environment.

FEATURES

 Compliant USB3.0 and USB2.0 / USB1.1 specification

 USB3.0 hub is plug-and-play without driver installation. The driver installation is for the Gigabit Ethernet adapter portion.

 IEEE 802.3, 802.3u, 802.3ab , 802.3az

(10BASE-T/100BASE-TX/1000BASE-T) compatible

 Supports both Full-duplex with flow control and Half-duplex with backpressure operation

 Supports

 Supports IEEE 802.1Q VLAN tagging and 2 VLAN ID filtering; received VLAN Tag (4 bytes) can be stripped of or preserved

 Supports advanced link down power saving when Ethernet cable is unplugged

 Supports Windows XP, Vista , 7, 8

 Supports MAC OS 10.4/10.5/10.6/10.7/10.8 for x86 and Power PC

*(OS 10.7 no need to install AP)

PACKAGE CONTENTS

 USB 3.0 hub with Ethernet Adapter x 1

 Driver CD x 1

 Quick Installation Guide x 1

SOFTWARE INSTALLATION

USB3.0 hub portion of the product is plug-and-play without driver installation.

The driver installation is for the Gigabit Ethernet adapter portion.

Windows

1. Please insert the CD into your computer’s CD-ROM or DVD drive.

2. When the AutoPlay screen appears, click Run Setup.exe.

3. Please follow the installation step by step.

4. When the following screen appears, click Finish.

Mac

1. Please insert CD into your computers CD-ROM or DVD drive and follow these steps.

Click Setup  Drivers  Mac folder  ax88179.dmg  ax88179_v3.5.0.

2. Please follow the process of installation step by step.

3. When the following screen appears, click Restart.