Register your product and get support at
www.philips.com/welcome
EN User manual
3
ES Manual del usuario
21
FR Mode d’emploi
39
DC291
Canada
English:
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This Class B
digital apparatus complies with Canadian ICES-003.
Français:
Cet appareil numérique n’émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de Classe B prescrites dans
le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des
Communications du Canada. Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
L’appareil est conforme à la réglementation FCC, section 15, et à la norme
21 CFR 1040.10. Son utilisation est soumise à deux conditions :
1. L’appareil ne doit pas provoquer d’interférences nuisibles, et
2. L’appareil doit supporter les interférences reçues, y compris les
interférences empêchant son fonctionnement correct.
1 Important
6
Safety
Notice
6
7
8 Product information
18
Specifications
18
9 Troubleshooting
19
2 Your Docking Entertainment System 9
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Get started
Install batteries
Connect power
Set time and date
Turn on
4 Play
Play from iPod/iPhone/iPad
Play from an external device
5 Listen to radio
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
6 Other features
Set the alarm timer
Set the sleep timer
Adjust display brightness
7 Adjust sound
Adjust volume level
Mute sound
Select a preset sound effect
Enhance bass
9
9
10
11
12
12
13
13
14
14
14
15
15
15
16
16
16
16
16
17
17
18
18
18
18
18
EN
3
English
Contents
Register online at www.philips.com/welcome today to
get the very most from your purchase.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below,so don't miss out.
Register online at www.philips.com/welcome to ensure:
*Product Safety Notification
*Additional Benefits
By registering your product, you'll receive notification - directly
from the manufacturer.
Registering your product guarantees that you'll receive all of
the privileges to which you’re entitled, including special moneysaving offers.
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You’ve selected one of
the best-built, best-backed products available today.We’ll do everything in our power to keep you happy with your purchase for many
years to come.
As a member of the PHILIPS “family,” you’re entitled to protection
by one of the most comprehensive warranties in the industry.
What’s more, your purchase guarantees you’ll receive all the
information and special offers for which you qualify, plus easy access
to accessories from our convenient home shopping network.
Most importantly, you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing
in a PHILIPS product.
P.S. To get the most from your PHILIPS purchase, be
sure to register online at:
www.philips.com/welcome
4
EN
This “bolt of lightning” indicates uninsulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention to features for which you should
read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this
information for future reference.
Model No.__________________________
Serial No. ________________________
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
suppliers, or publishers may provide a separate warranty for their
own products packaged with the bundled product.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
English
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product to Philips.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product to Philips.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 10313 Stamford, CT 06904
3140 035 50201
EN
5
1 Important
Safety
Important Safety Instructions
a Read these instructions.
k Only use attachments/accessories
specified by the manufacturer.
l Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
i Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
6
EN
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
n Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
o Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the apparatus:
• Install all batteries correctly, + and as marked on the apparatus.
• Do not mix batteries (old and new
or carbon and alkaline, etc.).
• Remove batteries when the unit is
not used for a long time.
• Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire
or the like.
p Apparatus shall not be exposed to
dripping or splashing.
r This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
s Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
• Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
• Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for reasonable
periods of time.
• Be careful not to adjust the volume as
your hearing adapts.
• Do not turn up the volume so high that
you can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight,
naked flames or heat.
• Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect the
apparatus from the power.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Notice for the USA
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications.
EN
7
English
q Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with FCC’s and IC’s
RF radiation exposure limits set forth for an
uncontrolled environment. The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers
must ensure that 20cm separation distance
will be maintained between the device
(excluding its handset) and users.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
8
EN
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Caution
• Removal of the built-in battery invalidates the
warranty and may destroy the product.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
“Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively,
and has been certified by the developer to
meet Apple performance standards. Apple is
not responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
iPad is a trademark of Apple Inc.
CLASS II apparatus with double insulation,
and no protective earth provided
English
2 Your Docking
Entertainment
System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from iPod,
iPhone, iPad, radio, or other audio devices.
The radio, iPod, iPhone, or iPad can be set as
the alarm timer. You can set two alarm timers to
go off at different time.
What’s in the box
Check and identify the contents of your package:
• Main unit
• Remote control
• 1 x MP3 link cable
• User manual
• Quick start guide
EN
9
Overview of the main unit
o
n
BUZ ZERMP3 LINK
AC ~
FM
ANTENNA
m
a
b
c
d
DOCKING SYSTEM FOR
DATE
VOL
SLEEP
SOURCE
SET TIME
PROG
e
VOL
ALARM 1
ALARM 2
f
l
k
j
i
h
g
a
•
/DATE
View the clock time and date.
b SLEEP
• Set the sleep timer.
c
/
•
•
d
•
•
10
Search within an audio file.
Tune to a radio station.
/SET TIME/PROG
Set the clock and date.
Program radio stations.
EN
e
•
•
•
Turn on the unit or switch to standby
mode.
Deactivate the sleep timer.
Stop alarm.
f ALARM 1/ALARM 2
• Set the alarm timer.
• Turn off the alarm tone.
• View alarm settings.
g Display panel
• Show the current status.
Overview of the remote
control
English
h REPEAT ALARM/BRIGHTNESS
CONTROL
• Repeat the alarm.
• Adjust the display brightness.
i SOURCE
• Select a source: iPod/iPhone/iPad,
FM tuner or MP3 link.
j OK/
• Start or pause iPod/iPhone/iPad play.
• Confirm selection.
• Select FM stereo or FM mono.
k
/
•
•
•
Skip to the previous/next audio file.
Select a preset radio station.
Adjust time.
l VOL +/• Adjust volume.
m Dock for iPod/iPhone/iPad
• Load an iPod/iPhone/iPad.
n FM antenna
• Improve FM reception.
o MP3-LINK
• Jack for an external audio device.
a
b
p
TUNER
POWER
c
OK
d
e
f
g
h
i
j
SET TIME
MENU
MP 3 LINK
PROG
o
MUTE
n
VOL
m
BRIGHTNESS
SLEEP
REP ALM
DBB
k
DSC
l
ALM 1
ALM 2
a POWER
• Turn on the unit or switch to standby
mode.
• Stop alarm.
• Deactivate the sleep timer.
b DOCK
• Select iPhone/iPod/iPad source.
EN
11
c
/
•
•
•
Skip to the previous/next audio file.
Select a preset radio station.
Navigate through the iPod/iPhone/
iPad menu.
Adjust time.
•
d
/
•
•
Search within an audio file.
Tune to a radio station.
e OK/
• Start or pause iPod/iPhone/iPad play.
• Confirm selection.
• Select FM stereo or FM mono.
f MP3 LINK
• Select external audio device source.
g MENU
• Select the iPhone/iPod menu.
h SLEEP
• Set the sleep timer.
i BRIGHTNESS/REP ALM
• Adjust the display brightness.
• Repeat the alarm.
j DBB
• Turn on or off dynamic bass
enhancement.
3 Get started
Caution
• Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
• You can only use AC power as power supply.
Batteries (not supplied) are for backup purpose.
k DSC
• Select a preset sound setting.
l ALM 1/ALM 2
• Set the alarm timer.
• Turn off the alarm tone.
• View alarm settings.
m VOL +/• Adjust volume.
n MUTE
• Mute volume.
o SET TIME/PROG
• Set the clock and date.
• Program radio stations.
p TUNER
• Select the tuner source.
12
EN
2 x AA
2 x AA
1
2
Open the battery compartment.
3
Close the battery compartment.
MP3 LINK
English
Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
FM
ANTENNA
Caution
• Remove battery if it is exhausted or will not be
used for a long time.
• Batteries contain chemical substances, so they
should be disposed of properly.
• Perchlorate Material-special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
1
Connect the AC power cord to the wall
outlet.
Set time and date
Note
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
» Hour digits start to blink.
2
Press OK/
format.
3
4
Press
• Before you press any function button on the
remote control, first select the correct source
with the remote control.
• If you are not going to use the remote control
for a long time, remove the batteries.
Connect power
5
Caution
• Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
• Before connecting the AC power cord, ensure
you have completed all other connections.
/
to select the 12/24 hour
to set the hour.
Press SET TIME/PROG to confirm.
» The minute digits begin to blink.
Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
• In 12 hour format, [MONTH--DAY] is displayed.
• in 24 hour format, [DAY--MONTH] is displayed.
Note
• The type plate is located on the bottom of the
main unit.
EN
13
Turn on
1
Press POWER.
» The unit switches to the last selected
source.
Switch to standby
1
Press POWER again to switch the unit to
standby mode.
» The time and date (if set) appear on
the display panel.
4 Play
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
Apple iPod and iPhone models with a 30-pin
dock connector.
• iPod Touch 1st generation
• iPod Touch 2nd generation
• iPod Touch 3rd generation
• iPod Touch 4th generation
• iPod nano 1st generation
• iPod nano 2nd generation
• iPod nano 3rd generation
• iPod nano 4th generation
• iPod nano 5th generation
• iPod nano 6th generation
• iPod mini.
• iPhone
• iPhone 3G
• iPhone 3GS
• iPhone 4
• iPad
Listen to the iPod/iPhone/iPad
1
2
14
EN
Press DOCK key to select dock source.
Place the iPhone/iPod/iPad into the dock.
•
•
•
To pause/resume play, press OK/ .
To skip to a track, press / .
To search during play, press and
hold / , then release to resume
normal play.
To go back to the previous iPod/
iPhone menu, press MENU.
To scroll through the menu, press / .
To confirm a selection, press OK/ .
» If no key is pressed for more than
10 seconds, OK/
acts back as
the play/pause key.
Charge the iPod/iPhone/iPad
5 Listen to radio
English
•
•
•
Note
• Only FM radio reception is available on this unit.
Tune to a radio station
Tip
• Position the antenna as far as possible from TV,
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
VCR or other radiation source.
Note
Tip
• For certain iPod models, it may take up to a
minute before the charging indication appears.
• If clock is not manually set, when iPhone/iPod/
ipad is connected, the clock radio synchronizes
time from the iPhone/iPod/iPad automatically.
• For optimal reception, fully extend and adjust
the position of the antenna.
1
2
Note
Play from an external device
Press and hold / for more than
2 seconds.
» [Srch] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
• iPod with color display, iPod classic, and iPod
with video are not compatible with dock
charging.
Press TUNER to select FM tuner.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/ repeatedly until you find
optimal reception.
You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the
back of the unit.
• the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
EN
15
Program radio stations
automatically
You can program a maximum of 20 preset radio
stations.
1
In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to
activate automatic program mode.
» [AUTO] (auto) is displayed.
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1
Ensure that you have set the clock
correctly. (See “Get started - Set time
and date”.)
2
Press and hold ALM 1 or ALM 2 for
2 seconds.
» [AL 1] or [AL 2] begin to blink.
3
Program radio stations
manually
Press SOURCE on the top panel to select
an alarm sound source: iPod/iPhone/iPad,
FM tuner, or buzzer.
4
Press ALM 1 or ALM 2.
» The hour digits begin to blink.
You can program a maximum of 20 preset radio
stations.
5
6
Press
7
8
Repeat steps 5-6 to set the minute.
9
Repeat steps 5-6 to set the alarm volume.
» The unit automatically stores radio
stations with sufficient signal strength.
» The first programmed radio station is
broadcast automatically.
1
2
Tune to a radio station.
3
4
5
Press
Press SET TIME/PROG to activate the
program mode.
/
to select a number.
Press SET TIME/PROG to confirm.
Repeat the above steps to program other
stations.
/
repeatedly to set the hour.
Press ALM 1 or ALM 2 to confirm.
» The minute digits begin to blink.
Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
Tip
Tip
• If you set iPhone/iPod playlist as the sound
• To overwrite a programmed station, store
another station in its place.
• To select FM stereo or FM mono, press OK.
Select a preset radio station
1
Press
16
EN
/
to select a preset number.
source, you must create a playlist in iTunes called
“PHILIPS” and import it to your iPhone/iPod.
• If no playlist is created in the iPod/iPhone or
there is no song in the playlist, the unit will
wake to songs in the iPod/iPhone.
Set the sleep timer
1
This unit can switch to standby automatically
after a set period of time.
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
» If the timer is activated, [ AL 1] or
[ AL2] is displayed.
» If the timer is deactivated, [
[ AL2] disappears.
AL1] or
Repeat alarm
1
1
English
Activate and deactivate the alarm
timer
Press SLEEP repeatedly to select a set
period of time (in minutes).
» When the sleep timer is activated, the
display shows , and the volume will
gradually decrease in the last 5 minutes.
To deactivate sleep timer
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes later.
Press SLEEP repeatedly until [OFF] (off)
is displayed.
» When the sleep timer is deactivated,
disappears on the display.
Tip
• You can press / to adjust the interval to
repeat alarm.
Adjust display brightness
1
Stop alarm ring
1
Press BRIGHTNESS/REP ALM repeatedly
to select different levels of display
brightness.
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm settings
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.
EN
17
7 Adjust sound
8 Product
information
Adjust volume level
1
During play, press VOL +/- to increase/
decrease the volume level.
Note
• Product information is subject to change
without prior notice.
Mute sound
1
During play, press MUTE to mute/unmute
sound.
Specifications
Amplifier
Select a preset sound effect
1
During play, press DSC repeatedly to
select:
• [ROCK] (rock)
• [JAZZ] (jazz)
• [POP] (pop)
• [CLASSIC] (classic)
• [FLAT] (flat)
Enhance bass
1
During play, press DBB to turn on or off
dynamic bass enhancement.
» If DBB is activated, [DBB] is displayed.
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input (MP3 link)
2 x 5 W RMS
20 -20000 Hz, -3dB
>67 dB
0.5 V RMS 20kohm
FM
Tuning Range
Tuning grid
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Sensitivity
Total Harmonic
Distortion
Signal to Noise Ratio
FM 87.5 - 108 MHz
100 KHz
<22 dBf
<43 dBf
<28dBf
<2%
>55 dB
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
18
EN
4 ohm
57mm
>84dB/m/W
AC power
Operation Power
Consumption
Standby Power Consumption
(clock display)
Dimensions
- Main Unit (W x H x D)
Weight
- With Packing
- Main Unit
English
9 Troubleshooting
General information
120V~,60Hz
7.5 W
<1 W
Warning
• Never remove the casing of this apparatus.
263 x114 x
165 mm
2.4 kg
1.4 kg
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
(www.philips.com/welcome). When you
contact Philips, ensure that the apparatus
is nearby and the model number and serial
number are available.
No power
•
Ensure that the AC power plug of the
unit is connected properly.
•
Ensure that there is power at the AC
outlet.
•
Ensure that the batteries are inserted
correctly.
No sound
•
Adjust the volume.
No response from the unit
•
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Poor radio reception
•
Increase the distance between the unit
and your TV or VCR.
•
Fully extend the FM antenna.
Timer does not work
•
Set the clock correctly.
•
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power
plug has been disconnected.
•
Reset the clock/timer.
EN
19
Philips Consumer Lifestyle
A division of Philips Electronics North America Corporation
P.O. Box 10313
Stamford, CT 06904
Phone: 1-888-PHILIPS (744-5477)
Meet Philips at the Internet
http://www.philips.com/welcome
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
DC291_37_UM_V4.1