Philips 42PFL5008G/77 42" Full HD 3D compatibility Smart TV Wi-Fi Black LED TV

Register your product and get support at
www.philips.com/welcome
42PFL5008G
46PFL5008G
42PFL5508G
46PFL5508G
EN User Manual
Contents
1
2
3
4
5
EN
Important
3
Safety
Care
Legal
Sustainability
Help and support
3
5
6
8
9
6
Use your TV
10
TV controls
Watch TV
View program guide
Watch 3D
Ambilight
Play multimedia files
Smart TV
Interactive TV
10
12
15
16
17
18
21
23
7
Use more of your TV
24
8
Pause TV
Record TV shows
Use Skype™
Play games
Set locks and timers
24
25
28
31
32
Change your TV settings
34
Picture and sound
Channels
Language settings
Universal access settings
Other settings
Update software
Reset all
34
36
37
38
38
38
40
Connect your TV
41
About cables
Connect antenna
Connect devices
Connect more devices
Watch connected devices
Set up EasyLink devices
Connect to a network and the
Internet
41
42
42
50
53
54
2
56
Troubleshooting
59
General issues
Channel issues
Picture issues
Sound issues
Connection issues
Network issues
Contact Philips
59
59
60
60
61
61
62
Specifications
63
Power and reception
Display and sound
Display resolutions
Multimedia
Connectivity
Help version
63
63
63
63
66
66
Index
67
x
Safety
x
Precautions
Read and understand all instructions before
you use your TV. If damage is caused by
failure to follow the instructions, the
warranty does not apply.
Risk of electric shock or fire!
x Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilled
on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips Consumer Care to have
the TV checked before use.
x Never place the TV, remote control or
batteries near naked flames or other
heat sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
x
x
x
Never insert objects into the ventilation
slots or other openings on the TV.
Never expose the remote control or
batteries to rain, water or excessive
heat.
Avoid force coming onto power plugs.
Ensure that the power plug is fully
inserted into the power socket. Loose
power plugs can cause arcing or fire.
When the TV is swiveled, ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
To disconnect the TV from the mains
power, the power plug of the TV must
be disconnected. When disconnecting
the power, always pull the power plug,
never the cord. Ensure that you have
full access to the power plug, power
cord and outlet socket at all times.
Risk of damage to the TV!
x Two people are required to lift and
carry a TV that weighs more than 25kg
or 55lbs.
x When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat,
level surface that can support the
combined weight of the TV and the
stand.
x When wall mounting the TV, use only a
wall mount that can support the weight
of the TV. Secure the wall mount to a
wall that can support the combined
weight of the TV and wall mount. TP
Vision Netherlands B.V. bears no
responsibility for improper wall
mounting that results in accident, injury
or damage.
x If you need to store the TV,
disassemble the stand from the TV.
Never lie the TV on its back with the
stand installed.
x Before you connect the TV to the
power outlet, ensure that the power
voltage matches the value printed on
the back of the TV. Never connect the
TV to the power outlet if the voltage is
different.
x Parts of this product can be made of
glass. Handle with care to avoid injury
and damage.
EN
3
English
1 Important
Risk of injury to children!
Follow these precautions to prevent the TV
from toppling over and causing injury to
children:
x Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.
x Ensure that no part of the TV hangs
over the edge of the surface.
x Never place the TV on tall furniture,
such as a bookcase, without anchoring
both the furniture and TV to the wall or
a suitable support.
x Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
x The product/remote control may
contain a coin type battery, which can
be swallowed. Keep the battery out of
reach of children at all times!
Risk of overheating!
x Never install the TV in a confined space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure that curtains or other objects
never cover the ventilation slots on the
TV.
Risk of injury, fire or power cord damage!
x Never place the TV or any objects on
the power cord.
x Disconnect the TV from the power
outlet and aerial before lightning storms.
During lightning storms, never touch
any part of the TV, power cord or aerial
cable.
Risk of hearing damage!
x Avoid using earphones or headphones
at high volumes or for prolonged
periods of time.
Low temperatures
x If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting
the TV to the power outlet.
EN
4
3D health warning
For 3D TVs only.
x If you or your family has a history of
epilepsy or photosensitive seizures,
consult a medical professional before
exposing yourself to flashing light
sources, rapid image sequences or 3D
viewing.
x To avoid discomfort such as dizziness,
headache or disorientation, we
recommend not watching 3D for
extended periods of time. If you
experience any discomfort, stop
watching 3D and do not immediately
engage in any potentially hazardous
activity (for example driving a car) until
your symptoms have disappeared. If
symptoms persist, do not resume
watching 3D without consulting a
medical professional first.
x Parents should monitor their children
during 3D viewing and ensure they do
not experience any discomfort as
mentioned above. Watching 3D is not
recommended for children under six
years of age as their visual system is not
fully developed yet.
x Do not use the 3D glasses for any
purpose other than watching this 3D
TV.
x
Screen
x
x
x
x
x
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen
with any object.
Unplug the TV before cleaning.
Clean the TV and frame with a soft
damp cloth and wipe gently. Avoid
touching the Ambilight LEDs on the
back side of the TV. Never use
substances such as alcohol, chemicals or
household cleaners on the TV.
To avoid deformations and color fading,
wipe off water drops as soon as
possible.
Avoid stationary images as much as
possible. Stationary images are images
that remain onscreen for extended
periods of time. Stationary images
include onscreen menus, black bars,
time displays, etc. If you must use
stationary images, reduce screen
contrast and brightness to avoid screen
damage.
3D glasses
CHOKING HAZARD - Keep the
product out of reach of children under
three years of age at all times! The
product contains small parts which can
be swallowed.
Placement tips
x
Position the TV where light does not
shine directly on the screen.
x The ideal viewing distance of this TV is
three times its diagonal screen size. For
example, if the diagonal screen size of
the TV is 81cm / 32", the ideal viewing
distance is ~2.5m / ~92" from the front
of the screen.
x While seated, your eyes should be level
with the center of the screen.
TV placement
You can apply the best sound settings for
your TV by selecting the TV placement (wall
mount or stand mount).
1. Press .
2. Select [Setup], then press OK.
3. Select [TV settings] > [General settings]
> [TV placement].
4. Select [On a TV stand] or [Wall
mounted], then press OK.
For sets with 3D glasses supplied.
Lock the TV
Follow these instructions to take care of
your glasses:
x Use a clean soft cloth (microfiber or
cotton flannel) to clean the lenses to
avoid scratching them. Never spray
cleaner directly on the 3D glasses. You
can use pre-moistened cleaning cloths
from most well-known lens
manufacturers of sunglasses.
x Do not expose the 3D glasses to direct
sunlight, heat, fire or water. This may
result in a product malfunction or fire.
x Do not drop, bend or apply force to
the lenses of the 3D glasses.
x Do not use cleaning chemicals
containing alcohol, solvent, surfactant, or
wax, benzene, thinner, mosquito
repellent or lubricant. Using these
chemicals can cause discoloration or
cracks.
Your TV is equipped with a Kensington
security slot at the base of the TV. To secure
the TV, purchase a Kensington anti-theft lock
(sold separately).
EN
5
English
Care
Legal
Notice
2013 © TP Vision Netherlands B.V. All rights
reserved. Specifications are subject to change
without notice. Trademarks are the property
of Koninklijke Philips Electronics N.V or their
respective owners. TP Vision Netherlands
B.V. reserves the right to change products at
any time without being obliged to adjust
earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other
than those specified herein, confirmation of
their validity and suitability must be obtained.
TP Vision Netherlands B.V. warrants that the
material itself does not infringe any United
States patents. No further warranty is
expressed or implied.
TP Vision Netherlands B.V. cannot be held
responsible neither for any errors in the
content of this document nor for any
problems as a result of the content in this
document. Errors reported to Philips will be
adapted and published on the Philips support
website as soon as possible.
Terms of warranty
x Risk of injury, damage to TV or void of
warranty! Never attempt to repair the
TV yourself.
x Use the TV and accessories only as
intended by the manufacturer.
x The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Care for
service or repairs.
x Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not
recommended or authorized in this
manual shall void the warranty.
EN
6
Pixel characteristics
This LED product has a high number of
color pixels. Although it has effective pixels
of 99.999% or more, black dots or bright
points of light (red, green or blue) may
appear constantly on the screen. This is a
structural property of the display (within
common industry standards) and is not a
malfunction.
Open source
This product contains software licensed
under an open source license. For
acknowledgments and license texts, please
refer to the electronic in-product user
manual. TP Vision Netherlands B.V. hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such offer is
requested by the respective licenses.
This offer is valid up to three years after
product purchase to anyone in receipt of this
information. To obtain source code, please
send your request in English with product
number to:
"Intellectual Property Department, TP Vision
Netherlands B.V., P.O. Box 80077, 5600 KA
Eindhoven, The Netherlands."
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
Kensington and Micro Saver are registered
US trademarks of ACCO World
Corporation with issued registrations and
pending applications in other countries
throughout the world.
Covered by one or more of the following
U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
DivX Certified® to play DivX® video up to
HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an
official DivX Certified® device that plays
DivX video. Visit divx.com for more
information and software tools to convert
your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered in
order to play purchased DivX
Video-on-Demand (VOD) movies. To
obtain your registration code, locate the
DivX VOD section in your device setup
menu. Go to vod.divx.com for more
information on how to complete your
registration.
The DTVi brand and logo are registered
marks of Pontifical Catholic University of Rio
de Janeiro (PUC-Rio) and the Federal
University of Paraíba (UFPB).
Java and all Java based trademarks are
registered trademarks of Oracle and/or its
affiliates, in the United States and other
countries.
AstroTV product is a software system
developed by TQTVD that comprises of a
complete implementation of the Ginga
Middleware Standard, compliant with
Brazilian SBTVD Standard nr. 6 (Vols 1, 2 3
and 4 – see references below).
Astro TV Middleware acknowledges the use
of the following libraries internally:
Boost – http://www.boost.org
Libxml2v – http://www.xmlsoft.org/
Webkit / OWB –
http://www.sand-labs.org/owb
Libjpeg - http://www.ijg.org/
Lua – http://wwwlua.org/
OpenSSL – http://www.openssl.org/
SWIG – http//www.swig.org
LuaJava –
http://www.keplerproject.org/luajava
LibCURL – http://curl.hazz.se
EN
7
English
Trademarks and copyrights
x
Skype is a trademark of Skype Limited or its
related companies.
PlayReady Final Products
Content owners use Microsoft PlayReady™
content access technology to protect their
intellectual property, including copyrighted
content. This device uses PlayReady
technology to access PlayReady protected
content and/or WMDRM-protected content.
If the device fails to properly enforce
restrictions on content usage, content
owners may require Microsoft to revoke the
device’s ability to consume
PlayReady-protected content. Revocation
should not affect unprotected content or
content protected by other content access
technologies. Content owners may require
you to upgrade PlayReady to access their
content. If you decline an upgrade, you will
not be able to access content that requires
the upgrade.
All other registered and unregistered
trademarks are the property of their
respective owners.
Sustainability
Energy efficiency
This TV is designed with energy-efficient
features. To access these features, press the
Green button on the remote control.
x Energy saving picture settings: You can
apply a combination of energy saving
picture settings. While you watch TV,
press the Green button and select
[Energy saving]. Then select the
[Energy saving] picture setting.
x Screen off: If you only want to listen to
audio from the TV, you can switch off
the TV display. Other functions
continue to operate normally. While
you watch TV, press the Green button
and select [Screen off].
EN
8
x
x
x
x
Light sensor: When the surrounding
light darkens, the built-in ambient light
sensor lowers the brightness of the TV
screen. To switch on the sensor, press
the Green button while you watch TV
and select [Light sensor].
Low standby power: The advanced
power circuitry reduces the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.
Auto switch off: To conserve energy,
set the TV to switch off automatically
after a period of inactivity. While you
watch TV, press the Green button and
select [Auto switch off]. Then select
the period after which the TV switches
off.
Switch off inactive devices: Switch off
connected EasyLink HDMI-CEC
(Consumer Electronic Control)
compliant devices that are inactive.
While you watch TV, press the Green
button and select [Inactive devices off].
Power management: An advanced
power management helps save the
energy consumed by this TV. To view
how your personalized TV settings
affect the TV's relative power
consumption, press , then select
[Setup] > [Watch demos] > [Active
Control demo].
Help and support
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Use Help
English
Recycling
To access the onscreen [Help] menu, press
the Blue button.
To exit from the [Help] menu, press
.
Visit Philips website
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European
Directive 2002/96/EC. Please inform yourself
about the local separate collection system
for electrical and electronic products.
If you can't find what you need in the
onscreen [Help], visit the Philips support
website at www.philips.com/support.
At the Philips support website, you can also:
x Find answers to Frequently Asked
Questions (FAQ)
x Download a printable PDF version of
this user manual
x Email us a specific question
x Chat online with Philips Consumer Care
(available in certain countries only)
Use the Philips connectivity guide
Please act according to your local rules and
do not dispose of your old products with
your normal household waste. Correct
disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste. Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the
environmental and human health.
An easy-to-use connectivity guide gives you
guidance on how to connect your TV to
other devices. Visit
http://www.connectivityguide.philips.com.
Search the TV forum
Your question may have already been
answered by the Philips TV community of
users. Visit www.supportforum.philips.com.
Contact Philips
You can contact Philips Consumer Care in
your country for support. The number is
available in the leaflet accompanying this
product, or online at
www.philips.com/support.
Before you contact Philips, write down the
model and serial number of your TV. You
can find this information on the back of your
TV or on the TV packaging.
EN
9
2 Use your TV
TV controls
Rear controls
1. Standby indicator LED and remote
control sensor
The standby LED indicates when your TV is
in standby. Point the remote control at the
sensor. Make sure that the line of sight
between the remote control and the TV is
not blocked.
Remote control
1. (Standby): Switch the TV on or off.
2. CH +/-: Switch to the next or previous
channel.
3.
(SOURCE): Watch a connected
device.
+/- (Volume): Increase or decrease
4.
volume.
1. (Standby): Switch the TV on or to
standby.
2. Play buttons: Control playback of media
files.
SOURCE: Watch a connected device.
3.
4.
TV: Watch TV.
5. AMBILIGHT: Switch Ambilight on or off.
Sensors and indicators
(Home): Access the Home menu.
6.
7. OK: Confirm an entry or selection.
8. SMART TV: Access Smart TV.
9.
(Navigation buttons): Navigate
through menus and select items.
EN
10
If you connect your TV to HDMI-CEC
enabled devices, such as a Blu-ray player or
home theater, you can control them at the
same time with one remote control. Simply
switch on EasyLink after connection.
Read more about Easylink in Connect your
TV > Set up Easylink devices > Control
devices (Page 55).
LIST: Access the TV channel list.
10.
11.
FORMAT: Change picture format.
INFO: Display information about
12.
current activity.
13. OPTIONS: Access currently available
options, picture and sound menus.
14.
(Back): Return to the previous menu
page or exit from a TV function.
15. CC: Switch on or off closed captions.
For programs that support closed captions.
16. CH - / CH +: Switch channels.
17. 3D: Watch 3D.
18. +/- (Volume): Adjust volume.
(Mute): Mute or restore audio.
19.
20. Color buttons: Select tasks or options.
21. EXIT: Exit from menus or TV functions.
22. 0-9 (Numeric buttons): Select TV
channels or enter text.
23. . (Dot): Enter digital sub-channels.
Onscreen remote control
You can also control connected HDMI-CEC
enabled devices through other buttons that
are available through the onscreen remote
control. Make sure that Easylink is switched
on after connection. Read more about
Easylink in Connect your TV > Set up
Easylink devices > Control devices (Page
55).
To access the onscreen remote control
1. While you watch a connected device,
press OPTIONS.
2. Select [Controls], then press OK.
3. Select an onscreen button, then press OK.
Smartphone control
With the smartphone application 'Philips
MyRemote', you can use your smartphone
as a secondary remote, and even as a
keyboard. You can also watch a slideshow of
the images in your smartphone on the TV.
Note: Make sure that your TV and
smartphone are connected to the same local
network. For more information, see
Connect your TV > Connect to a network
and the Internet (Page 56).
Follow these instructions to download the
application 'Philips MyRemote':
1. Visit the Apple App store or Google Play
to download the application 'Philips
MyRemote' on your smartphone.
2. Follow the instructions provided at the
applications store.
EN
11
English
EasyLink controls
Watch TV
Switch TV on or off
Automatic switch off
You can save energy with this TV's energy
efficiency settings, which are enabled by
default. If there is no user interaction (such
as pressing a remote control button or a
control on the TV) for four hours, the TV
will automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
3. Use the Navigation buttons to make a
selection, then press OK.
Adjust TV volume
Switch the TV on
• Connect the TV to the mains outlet and
switch on the main power.
• If the TV is not switched on, the
standby LED remains off.
Press on the TV.
• If the standby LED is lit, press on the
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press any key on the TV.
Switch TV to standby
Press on the remote control.
The standby LED on the TV switches to red.
Switch off the TV
Press on the TV.
The standby LED switches to off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
EN
12
Increase or decrease the TV volume
• Press +/- on the remote control.
+/- on the TV.
• Press
Mute or restore the TV volume
• Press
on the remote control to
mute the volume.
• Press
again to restore the volume.
Adjust headphone volume
1. Press .
2. Select [Setup] > [TV settings] > [Sound]
> [Headphone volume], then press OK.
3. Select a level.
Switch TV channels
Manage channel lists
English
After the channels are installed, you can:
x Filter channels.
x Switch between antenna and cable
channels.
x Rename channels.
x Hide channels.
x Lock a channel.
x Display channel logos.
Filter channels
1. Press
LIST.
2. Press OPTIONS, then select [Digital /
Analog].
3. Select an option, then press OK.
x
x
Press CH +/- on the remote control or
TV.
Press the Numeric buttons to enter a
channel number.
Manage favorite channels
Create a list of your favorite channels
1. While you watch TV, press
LIST.
2. Select a channel, select [Edit favorites] at
the bottom of the screen, and then press
OK.
Add favorite channels
1. Press
LIST.
2. Select a channel, then select [Mark as
favorite].
The selected channel is marked with an
asterisk.
Remove favorite channels
LIST.
1. Press
2. Select the channel, then select [Unmark
as favorite].
Display your list of favorite channels
1. While you watch TV, press
LIST.
to access the top menu.
2. Press
3. Select [Favorites], then press
OK.
Only channels in the favorites list are
displayed.
Tips: To select the menu tabs in the channel
list, press .
x [Digital + Analog]: Display all channels
in the channel list.
x [Digital TV channels]: Display only
digital channels.
x [Analog channels]: Display only analog
channels.
Switch between antenna and cable channels
You can switch between antenna and cable
channels.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Antenna
connection].
3. Select [Antenna] to watch antenna
channels or [Cable] to watch cable channels,
then press OK.
Rename channels
When you select a channel, its name
appears. You can change this channel name.
1. While you watch TV, press
LIST.
The channel list is displayed.
2. Select the channel to rename, then select
[Rename] from the bottom of the screen.
3. Press any Numeric button to access the
onscreen keyboard.
4. Press the Navigation buttons to select
each character, then press OK.
5. Once complete, select [Done], then press
OK to confirm.
EN
13
Hide channels
You can hide unwanted channels.
LIST.
1. While you watch TV, press
2. Select the channel to hide, then press
OPTIONS.
3. Select [Hide channel], then press OK.
The channel is hidden.
Lock a channel
You can prevent unauthorized access to
channels by locking them.
LIST.
1. While you watch TV, press
The channel list is displayed.
2. Select the channel to lock, then press
OPTIONS.
3. Select [Lock channel], then press OK.
4. If prompted, enter the pin code.
The channel is marked with a lock icon in
the channel list.
Tip: To watch a locked channel, enter the
pin code when prompted.
Display channel logos
If channel logos are available from the
broadcaster, you can display them in the
channel list.
LIST.
1. While you watch TV, press
The channel list is displayed.
2. Select a channel in the list, then press
OPTIONS.
3. Select [Channel logos] > [On], then press
OK.
Watch connected devices
Before you can watch a device, connect the
device to the TV. See Connect your TV >
Connect devices (Page 42).
Select a device with SOURCE
1. Press
SOURCE.
2. Select a device, then press OK.
Select a device from the Home menu
1. Press .
2. Select [Source], then press OK.
3. Select the device, then press OK.
To add or manage your connected devices,
see Connect your TV > Watch connected
devices > Change device settings (Page 53).
EN
14
Use picture and sound presets
Your TV comes with predefined picture and
sound settings. You can apply these settings
or customize them.
Select your preferred picture presets
1. While you watch TV, press OPTIONS.
2. Select [Picture and sound] in the top bar,
then press OK.
3. Select [Picture style], then press OK.
4. Select an option, then press OK:
x [Personal]: Apply your personalized
picture settings.
x [Vivid]: Rich and dynamic settings, ideal
for daytime viewing.
x [Football]: Ideal settings for football
matches.
x [Standard]: Default settings that suit
most environments and types of video.
x [Movie]: Ideal settings for movies.
x [Photo]: Ideal settings for photos.
x [Energy saving]: Settings that conserve
the most energy.
Select your preferred sound presets
1. While you watch TV, press OPTIONS.
2. Select [Picture and sound] in the top bar,
then press OK.
3. Select [Sound style], then press OK.
4. Select an option, then press OK:
x [Personal]: Apply your personalized
sound settings.
x [Original]: Settings that suit most
environments and types of audio.
x [Movie]: Ideal settings for movies.
x
x
x
[Music]: Ideal settings for listening to
music.
[Game]: Ideal settings for games.
[News]: Ideal settings for spoken audio,
such as the news.
From the broadcaster
You can change the picture format to suit
the video source.
1. Press
FORMAT.
2. Select a picture format, then press OK.
Select broadcaster program guide
Before you use the program guide, check
these settings:
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [TV guide].
3. Select [From the broadcaster], then press
OK.
Access broadcaster program guide
1. Press .
2. Select [TV guide], then press OK.
3. If you are viewing the program guide for
the first time, follow the onscreen
instructions to update the guide.
The available picture formats depend on the
video source:
• [Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.
• [Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.
• [Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.
• [4:3]: Display the classic 4:3 format.
• [Unscaled]: Provide maximum detail for
PC. Only available when PC mode is
selected in the Picture menu.
• [Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or
PC.
• [Wide screen]: Shows widescreen
format content unstretched. Not
recommended for HD or PC.
• [16:9 stretch]: Scale 4:3 format to 16:9.
View program guide
What you can do
You can view channel schedules and
program synopses for digital TV channels
using program guides provided by the
broadcasters. The availability of program
guides is dependent on your broadcaster.
You can view program guides through one
of two methods:
• From the broadcaster
• From the Internet
You cannot view a channel's program guide
information if:
• the age rating of the channel is equal or
higher than the age rating set on your
TV.
• the channel is locked.
Customize broadcaster program guide
You can customize the displayed information
to:
• Remind you when programs start.
• Display only preferred channels.
• Change day of display.
• Schedule recordings of programs. See
Use more of your TV > Record TV
shows > Schedule recordings (Page
26).
Note: Options may vary according to the
program information available from the
broadcaster.
1. In the program guide, press
OPTIONS.
2. Select an option, then press OK:
•
[Acquire EPG data]: Update program
guide information.
•
[Change day]: Select the day to display
program guide.
•
[Search by genre]: Search programs by
genre.
• [All reminders]: Display a list of all
program reminders
EN
15
English
Change picture format
From the Internet
Make sure that your TV is connected to the
Internet through a high-speed broadband
connection. See Connect your TV >
Connect to a network and the Internet
(Page 56).
Select Internet program guide
Before you use the program guide, check
these settings:
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [TV guide].
3. Select [From the Internet], then press
OK.
Access Internet program guide
1. Press .
2. Select [TV guide], then press OK.
Note: If you are viewing the program guide
for the first time, follow the onscreen
instructions to update the guide.
Customize Internet program guide
You can use the program guide to:
x Schedule recordings of programs. See
Use more of your TV > Record TV
shows > Schedule recordings (Page
26).
x Identify channels.
x Select day of display.
x Reload and zoom into the program
guide information.
x View security information.
Note: Options may vary according to the
program information available from the
broadcaster.
1. In the program guide, press
OPTIONS.
2. Select an option, then press OK:
x
x
x
x
EN
[Record]: Set a scheduled recording.
[Identify channel]: Manually update
channel information.
[Select day]: Select the day to display.
[Manual record]: Set a manual
recording.
16
x
x
x
[Reload page]: Refresh the page display.
[Zoom]: Change zoom level of page
display.
[Security info]: Display program
security information.
Watch 3D
What you need
Your TV is a 3D TV. Before you watch 3D,
read the health warning information in
Important > Safety > 3D health warning
(Page 4).
To watch 3D on this TV, use the Philips Easy
3D passive glasses supplied with your TV.
Note:
x If you need additional glasses, purchase
the Philips Easy 3D glasses, PTA417. 3D
glasses from other brands may reduce
or lose the 3D effect.
x Some 3D formats are not supported.
To experience the best 3D effect while you
watch 3D programs:
x Sit at a distance that is at least three
times the width (w) of the TV screen.
Automatically enable 3D
The TV detects when 3D is available and
prompts you to put on your 3D glasses to
start watching. To set the response of the
TV when a 3D signal is detected:
1. Press .
2. Select [Setup] > [TV settings] > [3D] >
[Switch to 3D].
3. Select a setting, then press OK.
x [Never]: No notification.
x [Notification only]: TV displays
notification first.
x [Automatic]: TV switches to 3D
automatically.
Select a source with 3D
For 3D discs:
1. Play the disc on a 3D Blu-ray disc player
that is connected to the TV HDMI
connector.
SOURCE, then select the 3D
2. Press
Blu-ray disc player.
For 3D TV programs:
1. Select [Watch TV], then switch to a TV
channel that broadcasts 3D content.
Note:
x To switch back to 2D, press 3D, then
select [2D].
x If you switch to another channel or a
connected device, the TV switches to
2D.
x
[3D - Top / bottom inverted] or [3D Side by side inverted]: Select if the TV
displays distorted images, such as the
background appearing nearer to you.
Convert 2D to 3D
You can convert any 2D program to watch
it in 3D.
1. Press 3D, then select [2D to 3D
conversion].
To switch off 2D to 3D conversion:
1. Press 3D, then select [2D].
Note: If you switch to another activity, the
conversion stops.
To adjust the 3D depth:
1. Press OPTIONS.
2. Select [Picture and sound] > [3D effect].
3. Select an option, then press OK.
Ambilight
What you can do
Ambilight makes watching TV more relaxing.
The light automatically changes to match the
color and brightness of the TV picture.
What you need
Select 3D input format
The TV detects when 3D is available and
prompts you to put on your 3D glasses to
start watching. If the TV cannot detect the
3D signal due to a missing 3D signal tag, it
displays images that overlap.
To switch the overlapping images to 3D,
change the 3D format.
1. Press 3D.
2. Select a setting, then press OK.
For the best Ambilight effect:
x Position the TV 25 cm away from the
wall.
x Dim the light in the room.
x
Switch on
x
[3D - Side by side]: Select if the TV
displays pictures that overlap vertically.
[3D - Top / bottom]: Select if the TV
displays pictures that overlap
horizontally.
1. Press AMBILIGHT on the remote control.
2. To switch Ambilight on or off, select [On]
or [Off].
EN
17
English
Start 3D
Switch on lounge light
To create a lounge light effect in your room,
switch on Ambilight while the TV is in
standby.
x While the TV is in standby, press
AMBILIGHT.
x To toggle between Ambilight lounge
light modes, press AMBILIGHT
repeatedly.
Note: It may take more than five seconds
for the lounge light to switch on.
Change settings
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Ambilight].
3. Select a setting, then press OK.
x [Mode]: Select an Ambilight mode from
[Off], [Dynamic] or [Static].
- [Off]: Switch off Ambilight.
- [Dynamic]: Select if you want
Ambilight to respond to onscreen
images.
- [Static]: Select if you want to set a
specific Ambilight color.
x [Brightness]: Adjust Ambilight
brightness.
x [Dynamic]: Adjust the Ambilight
response speed to the onscreen images.
Available only if the selected Ambilight
mode is [Dynamic].
x [Static]: Select the Ambilight color. This
color is fixed and does not respond to
changes in picture display. Available only
if the selected Ambilight mode is set to
[Static].
- [Color]: Select a predefined Ambilight
color.
- [Custom color]: Customize the
Ambilight color. Available only if the
selected Ambilight color mode is
[Custom].
EN
18
x
[Advanced]: Select for more Ambilight
settings.
- [Wall color]: Select the color of your
wall to apply suitable Ambilight settings.
- [TV switch off]: Select how Ambilight
switches off when the TV is switched to
standby.
- [Lounge light mood]: Select a
predefined Ambilight color for a lounge
light effect when the TV is switched to
standby.
Play multimedia files
What you can do
You can play videos, photos, and music on
your TV from:
x Your computer connected through the
home network.
x A USB device connected to the TV.
Play files from computer
What you need
x A wired or wireless home network,
connected with a Universal Plug and
Play (uPnP) router.
x Optional: A LAN cable that connects
your TV to your home network.
x A media server running on your
computer.
x Appropriate settings on your computer
firewall to allow you to run the media
server.
Set up the network
1. Connect your TV and the computer to
the same home network. See Connect your
TV > Connect to a network and the
Internet (Page 56).
2. Switch on your computer and the router.
Note:
If the apparatus does not return to DLNA
mode due to external electrical disturbances
(e.g. electrostatic discharge), user
intervention is required.
Tips:
x Select the top bar to filter your files by
type.
x Select [Sort] to arrange the files by
name, date, or other fields.
2. Switch on media sharing on your
computer using the media server. For more
information on how to set up the media
server, refer to the website of the media
server.
Play files
SOURCE.
1. Press
2. Select [Browse network], then press OK.
3. Select a file from the media server, then
press OK to start play.
4. Press the Play buttons to control play.
5. Optional: To select a different media
server, select [Media server].
Watch video
1. Select
in the top bar.
2. Select a video, then press OK.
3. Optional: To play all the videos in a folder,
select a video, then select [Play all].
x To skip to the next or previous video,
press CH+ or CH -.
x To pause the video, press OK.
Press OK again to resume playback.
Play files from USB device
If you have photos, videos or music files on a
USB storage device, you can play the files on
TV. If you are using a USB hub, make sure
that you connect it to the USB 1 connector
on the back of the TV.
Caution:
x TP Vision is not responsible if the USB
storage device is not supported, nor is it
responsible for damage or loss of data
in the device.
x Do not overload the USB port. If you
connect a USB storage device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
Browse USB device
1. Connect the USB device to the USB
connector on the TV.
2. Press
SOURCE, select [Browse USB],
and then press OK.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons to control play.
5. Optional: To select a different USB device,
select [USB device] at the bottom of the TV
screen.
Play options
x
To skip forward or backward 10
seconds, press or .
x To search forward or backward, press
or
. Press the button repeatedly
to toggle between different speeds.
x To stop the video, press .
Video options
While you play video, press OPTIONS,
then press OK to select an option:
x [Subtitles]: Switch on or off closed
captions. You can also select to display
the closed captions only when the TV is
muted.
x [Audio language]: Select an audio
language.
x [Repeat]: Select [Repeat] to play the
video file repeatedly or [Play once] to
play the video file once.
x [Media server]: When you play content
from a media server, you can select
another media server.
x [Shuffle on] / [Shuffle off]: Enable or
disable random play of video files.
x [DivX(R) VOD]: Display the DivX
registration and deregistration codes for
this TV.
Note:
To view information about a video (for
example, played position, duration, title, or
INFO.
date), select the video, then press
INFO
To hide the information, press
again.
EN
19
English
Set up media sharing
1. Install a media server on your computer
to share media files. These are some media
servers:
x For PC: Windows Media Player 11 (or
higher) or TVersity
x For Mac: Twonky
Listen to music
1. Select
in the top bar.
2. Select a track, then press OK.
3. Optional: To play all the tracks in a folder,
select a track, then select [Play all].
x To skip to the next or previous track,
press CH+ or CH-.
x To pause the track, press OK.
Press OK again to resume playback.
x To skip forward or backward 10
seconds, press or .
x To search forward or backward, press
or
. Press repeatedly to toggle
between different speeds.
x To stop the music, press .
Music options
While you play music, press OPTIONS,
then press OK to select an option:
x [Repeat]: Select [Repeat] to play a
track or an album repeatedly, or select
[Play once] to play a track once.
x [Media server]: When you play content
from a media server, you can select
another media server.
x [Shuffle on] / [Shuffle off]: Enable or
disable random play of tracks.
Note:
To view information about a song (for
example, title, artist or duration), select the
INFO.
song, then press
To hide the information, press
INFO
again.
View photos
1. Select
in the top bar.
2. Select a photo thumbnail, then press OK.
Start a slideshow
If there are multiple photos in a folder, select
a photo, then select [Play all].
x To stop the slideshow or close the
photo, press
LIST or .
EN
20
Slideshow options
While you play a slideshow, press
OPTIONS, then press OK to select an
option:
x [Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in the
slideshow.
x [Repeat]: Select [Repeat] to watch a
slideshow repeatedly or [Play once] to
watch once.
x [Slideshow time]: Select the display
time for each photo in the slideshow.
x [Slideshow transitions]: Select the
transition from one photo to the next.
x [Media server]: When you play content
from a media server, you can select
another media server.
Play DivX® VOD (Video On
Demand)
This TV is DivX Certified(R) and plays
high-quality DivX Video-On-Demand videos.
To play DivX VOD videos from a video
store or from your computer, you must first
activate DivX VOD on the TV. The DivX
VOD activation of your TV is free of charge.
Register the TV
If the TV is not yet activated when you start
the playback of a rental DivX video, the TV
displays the DivX registration code to
activate this TV.
To register, follow these steps.
1. When the TV displays the 8 or 10-digit
registration code, write down the code and
go to http://vod.divx.com.
2. Download the DivX player software on
your computer and install the software.
3. Start the DivX player software and create
a DivX Account: Click VOD > Create a
DivX Account.
4. In the DivX player, register the TV with
the registration code of the TV: Click VOD
> Register a DivX Certified Device.
5. When prompted, download and save the
registration video to a USB flash drive or
your connected media server.
What you need
1. On your home network, connect the TV
to the Internet.
2. On your TV, configure Smart TV.
3. Optional: On your PC, register with Philips
to enjoy exclusive benefits and receive
updates on product information. You can
register at any time.
Smart TV
What you can do
With Internet Applications (apps), which are
specially adapted Internet websites for your
TV, you can enjoy these features and more:
x Read newspaper headlines
x Watch and rent videos
x Check weather forecasts
x Catch up with TV programs that you
missed
Find out more about Smart TV services from
the Smart TV forum website,
www.supportforum.philips.com.
Note:
x Smart TV services and apps vary from
country to country.
x Availability of catch-up TV apps and
their TV programs is subject to the
country setting of your TV. To find out
which TV programs are available, access
the program guide within the app.
x Smart TV displays one page at a time, in
full screen view.
x Certain websites may not display
completely. Functions that require
plug-ins may be unavailable.
x TP Vision Netherlands B.V. bears no
responsibility regarding the content and
the quality of the content provided by
the content service providers.
Connect the TV to the Internet
1. On your home network, connect a router
with a high-speed connection to the
Internet.
2. Switch on the router.
3. Install the network. See Connect the TV
> Connect to a network and the Internet
(Page 56).
Start Smart TV
1. Press SMART TV.
The terms and conditions of use are
displayed.
2. Follow the onscreen instructions to
complete registration.
Note: The first time you start Smart TV, a
prompt asks if you want to enable parental
control to lock adult apps. If you lock an
adult app, advertisements and web pages
that are not adapted for Smart TV remain
accessible.
EN
21
English
6. Go to your TV and play the registration
video on your TV. This completes the
registration and activates DivX on your TV.
Consult the DivX website for detailed
support.
To de-register this TV:
SOURCE.
1. Press
2. Select [Browse USB], then press OK.
3. Press OPTIONS, select [DivX(R)
VOD], and then press OK.
4. Follow the onscreen instructions.
Access Smart TV apps
You can access apps through the Smart TV
home page. The icons on this page represent
the apps installed on your TV.
To access an app, select the app, then press
OK to confirm.
Add apps
1. Select [App Gallery], then press OK.
2. Select an app, then press OK to add it to
your home screen.
3. Follow the onscreen instructions to add
the app.
Tips:
x You can search for apps available in
other countries.
x To return to the Smart TV home page,
LIST.
press
Note: Smart TV services are updated
automatically. To view the latest updates, in
[App Gallery], select [All], then change to
[New].
Access websites
1. Select an Internet app, then press OK.
2. Select the web address field, then press
OK.
A keyboard appears on the screen.
3. For each character of the web address,
select the character, then press OK.
Tip: You can also use the Numeric buttons
on the TV remote control to enter a web
address.
Zoom page
To zoom in and out on an Internet page, do
the following:
1. Press OPTIONS, then select [Zoom].
2. Use the slider bar to set the enlargement.
3. Use the Navigation buttons to jump
between highlighted items and scroll through
an Internet page.
Scroll pages
Press the Navigation buttons
and
to
scroll up and down on a web page.
Reload page
If a page does not load correctly, press
OPTIONS, then select [Reload page].
EN
22
View security info
To view security information about a page,
press OPTIONS, then select [Security
info].
Smart TV options
Clear Smart TV memory
You can clear the Smart TV memory
completely, including your favorites, parental
control code, passwords, cookies, and
history.
Warning: This option resets the Smart TV
memory completely. It also deletes the
settings of other interactive applications such
as DTVi (Digital TV interactive).
1. Press .
2. Select [Setup] > [Network settings].
3. Select [Clear Internet memory], then
press OK.
Rent online videos
What you need
Make sure that your TV is connected to the
Internet through a high-speed broadband
connection. See Connect your TV >
Connect to a network and the Internet
(Page 56).
Access a video store
1. Press SMART TV.
2. Access the [App Gallery] to search for
available video store apps in your country.
3. Select a store, then press OK to confirm.
The icon of the video store is added to the
home page.
4. To access a store, select its icon and press
OK.
Rent a video
Follow the onscreen instructions to rent and
watch the video.
1. Open a video store app. You may need to
register or enter your log-in information.
2. Select a video.
3. Make the online payment.
4. Start watching the video.
What you can do
With interactive TV, you can view additional
information or entertainment pages provided
by digital TV broadcasters. You can
experience true interactivity by responding
directly to the digital content.
Note: You cannot download files to your TV
with this feature.
Broadcasters use various interactive TV
systems such as:
x HbbTV (Hybrid Broadcast Broadband
TV)
x iTV (Interactive TV - MHEG)
x MHP (Multimedia Home Platform)
x DTVi (Digital TV interactive)
Visit the broadcaster's website for more
information to see which interactive system
is available in your country.
Access interactive TV
You can identify channels that offer
interactive services by a message that invites
you to press the Red button or OK to
access an interactive program.
1. Switch to a digital channel with interactive
services.
When the application is loading, a blinking
symbol is displayed. When the application
has loaded, an icon is displayed.
2. Press the Red button or OK to launch
the interactive application.
3. Follow the onscreen instructions and use
your remote control to navigate the
interactive pages.
Here are some examples of interactive
activities you can enjoy:
x View information about TV programs
x Join a quiz or contest
x Play games
x Shop online
x Pay for a video-on-demand (VOD)
program
x Vote
x Chat
What you need
To enjoy this service, you need:
x Digital channels with interactive services
x A wired or wireless home network,
connected through a Universal Plug and
Play router (uPnP).
For network connection, see Connect your
TV > Connect to a network and the
Internet (Page 56).
EN
23
English
Interactive TV
3 Use more of
your TV
Pause TV
What you can do
While you watch a digital channel, you can
pause a program to answer a phone call or
to have a break. The broadcast is stored on
a USB hard drive that is connected to the
TV. You can resume playback of the
program at any time.
Note:
x You can pause a program for a
maximum of 90 minutes.
x
The USB hard drive is formatted
exclusively for this TV. Keep it
permanently connected to the TV. You
cannot access the contents of the USB
hard drive from another TV or PC.
x Do not overload the USB port. If you
connect a USB hard drive device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
Note:
x Make sure that the TV and the USB
hard drive are switched off.
x While you are formatting the USB hard
drive, do not connect other USB
devices to the TV.
What you need
x
x
Tune your TV to receive digital
channels. See Change your TV settings
> Channels > Automatic installation
(Page 36).
Connect a USB 2.0 compatible hard
drive with a minimum capacity of 4 GB
and a minimum transfer speed of 30
megabits per second. For optimal
performance, use a hard drive with 32
GB disk space.
Install USB hard drive
To pause TV, you must connect a USB hard
drive to the TV and format it.
If the TV does not recognize the USB hard
drive, use a PC to format it to NTFS or
FAT32 system, and then try again.
Caution:
x TP Vision is not responsible if the USB
hard drive is not supported, nor is it
responsible for damage or loss of data
in the device.
x Formatting removes all data from the
connected USB hard drive.
EN
24
1. Connect the USB hard drive directly to
the TV, or if you intend to connect other
USB devices in future, connect the USB hard
drive through a USB hub.
Make sure that the USB hub is connected to
the USB 1 port on the TV.
2. Switch on the TV and the USB hard drive,
if it has an external power source.
3. Switch to a digital TV channel.
4. Press to start formatting the USB hard
drive.
5. Follow the onscreen instructions to
complete the formatting process.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard drive until this
process is complete.
Record TV shows
English
Pause a live TV broadcast
What you can do
If your TV can receive program guides, you
can record TV programs onto a USB hard
drive. You can record both current TV
programs as well as future TV programs.
Note:
Recording is only supported in countries
with Internet program guides.
What you need
x
Tune your TV to receive digital TV
channels such as DVB broadcasts. See
Change your TV settings > Channels >
Automatic installation (Page 36).
Connect a USB 2.0 compatible hard
drive with a minimum capacity of 32 GB
and a minimum transfer speed of 30
megabits per second. For optimal
performance, use a hard drive with 250
GB disk space. You can use the same
USB hard drive to record and pause TV
shows.
1. On a digital channel, press to pause a
TV program.
2. Press to continue watching.
The status bar shows these time indicators:
A. When the program was paused for the
first time.
B. Where the paused program is currently
playing.
C. Where the live program is currently
broadcast.
x
x
To record TV shows, you must connect a
USB hard drive to the TV and format it.
If the TV does not recognize the USB hard
drive, use a PC to format it to NTFS or
FAT32 system, and then try again.
Caution:
x TP Vision is not responsible if the USB
hard drive is not supported, nor is it
responsible for damage or loss of data
in the device.
x Formatting removes all data from the
connected USB hard drive.
x The USB hard drive is formatted
exclusively for this TV. Keep it
permanently connected to the TV. You
cannot access the contents of the USB
hard drive from another TV or PC.
To watch the stored broadcast, press
or
to search backward or
forward.
x To change playback speed, press
or
repeatedly.
x To watch the live TV broadcast, press
.
Note: If a recording is in progress, you
cannot pause the TV broadcast.
The stored broadcast on the USB hard
drive is deleted if you:
x Disconnect the USB hard drive.
x Start recording a TV program.
x Access Smart TV.
x Switch the TV to standby.
x Switch to another channel.
x Switch source to watch from a
connected device, such as a Blu-ray disc
player or digital receiver.
Install USB hard drive
EN
25
x
Do not overload the USB port. If you
connect a USB hard drive device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
Note:
x Make sure that the TV and the USB
hard drive are switched off.
x While you are formatting the USB hard
drive, do not connect other USB
devices to the TV.
1. Connect the USB hard drive directly to
the TV, or if you intend to connect other
USB devices in future, connect the USB hard
drive through a USB hub.
Make sure that the USB hub is connected to
the USB 1 port on the TV.
2. Switch on the TV and the USB hard drive,
if it has an external power source.
3. Switch to a digital TV channel.
4. Press to start formatting the USB hard
drive.
5. Follow the onscreen instructions to
complete the formatting process.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard drive until this
process is complete.
EN
26
Start recording
One-touch recording
You can record the program you are
currently watching with a single button.
1. While you watch TV, press .
Recording starts immediately. A pop-up
window is displayed, indicating the end time
of the program.
2. Optional: Use the Navigation buttons to
mark the end time of the recording.
3. Select [Confirm], then press OK.
4. To stop recording, press .
Note:
x While recording, you cannot switch TV
channels or pause a TV broadcast.
x If TV guide information is not available,
a default time of 30 minutes is set for
recording. You can change this if
needed.
Schedule recordings
View program information
Depending on the status of a program, you
can start watching it or schedule to record
the program.
1. Press .
2. Select [TV guide].
3. Select a channel and program, then press
OK.
The program information is displayed.
Note: If you schedule recordings while you
are away, make sure that you leave the TV in
standby and keep the USB hard drive
switched on.
Cancel a scheduled recording
1. Press .
2. Select [Recordings], then press OK.
A list of recordings is displayed.
3. Select the recording, then select
[Remove].
The schedule recording is canceled.
Watch recordings
1. Press .
2. Select [Recordings], then press OK.
A list of recordings is displayed.
3. Select a recording from the list, then press
OK.
The recording starts to play.
Sort recordings
1. Press .
2. Select [Recordings], then press OK.
A list of recordings is displayed.
3. Press OPTIONS.
4. Select an option to sort by name, date,
expiry date or type, then press OK.
Note:
x If a broadcaster limits the number of
days a recording can be viewed after
the program is broadcast, the list of
recordings shows the number of days
before the recording expires.
x If a recording has expired or if a
broadcaster restricts playback, the
recording cannot be played.
x If a scheduled recording is prevented by
the broadcaster or if the recording does
not occur as per schedule, it is marked
as [Failed] in the recordings list.
Delete recordings
You can view a list of all recordings and the
remaining USB hard disk space. To free up
disk space, delete recordings.
1. Press .
2. Select [Recordings], then press OK.
A list of recordings is displayed.
3. Select the recording, then select
[Remove].
EN
27
English
Schedule a TV program recording
You can schedule a recording of an
upcoming program that will be broadcast
today or up to eight days later. You can also
schedule a timed recording that is not linked
to any program, if program guide information
is not available.
1. Press , then select [TV guide].
2. Select the channel and program to record.
3. Optional: To record a program that will
be broadcast on another day: press
OPTIONS, select [Select day], then select
another day.
4. Select [Record].
A pop-up window is displayed.
5. Select and change the recording details
with the Numeric buttons and Navigation
buttons.
6. Select [Confirm], then press OK.
Change a scheduled recording
1. Press .
2. Select [Recordings], then press OK.
A list of scheduled recordings is displayed.
3. Select the recording, then select [Adjust
time].
4. Change the recording time as needed,
then select [Confirm].
Use Skype™
What you can do
x
x
x
x
x
x
Talk to anyone else on Skype, anywhere
in the world, for free.
Make low-cost calls to phones and
mobiles. A Skype subscription is
required. Visit www.skype.com.
Participate in conference calls.
Send and receive voicemails.
Forward a call.
Manage your online status, 'mood'
message, and profile information.
Note:
x No emergency calls with Skype. Skype is
not a replacement for your telephone
and cannot be used for emergency calls.
x This TV comes with Skype pre-installed
on it and ready to use. You do not
need to install or download any files for
using Skype. Simply connect a Philips TV
video camera to use Skype.
What you need
x
x
x
x
EN
A Philips TV video camera, PTA317/00
(sold separately), with built-in
microphone. See Connect your TV >
Connect more devices > Video call
camera (Page 52).
An Internet connection.
A wired or wireless home network. For
network connection, see Connect your
TV > Connect to a network and the
Internet (Page 56).
A Skype account. You can create a
Skype account on this TV or from your
computer.
28
Tip: If you have connected a USB keyboard
to this TV, you can enter text from your
keyboard. For keyboard connections, see
Connect your TV > Connect more devices
> Keyboard and mouse (Page 52).
Start Skype
Sign in to your account
1. Press , then select [Skype].
2. Enter your [Skype name] and [Password].
To enter text, select each field and press OK
to access the onscreen keyboard.
3. Select [Sign in], then press OK.
The Skype menu is displayed.
Tip: If you have forgotten your password,
start Skype on your computer. Visit
www.skype.com to retrieve your password.
Create an account
If you do not have a Skype name and
password, you can create an account from
your TV.
1. Select [Don't have a Skype Name?], then
press OK.
2. Read the Skype End User License
Agreement, Terms of Service and Privacy
Statement. Once complete, select [Accept]
and press OK.
3. When prompted, add information about
your name, Skype name, password and email
address.
4. Once complete, select [Create an
account] and press OK.
Your new account is accepted and you are
signed in.
If prompted, follow the onscreen instructions
to make changes to the entries.
Sign out from Skype
In the Skype menu, select [Sign Out], then
press OK.
You can add and view contacts that are
online or offline. You can also block or
unblock a selected contact.
Add a contact
1. In the Skype menu, select [Contacts],
then press OK.
2. Press OPTIONS, then select [Add
Skype contact] or [Add SkypeOut
Contact].
3. Press OK to display the onscreen
keyboard.
4. Follow the onscreen instructions to enter
the details.
A list of profiles is displayed.
5. Select a contact, then press OK.
An invitation request is sent to the contact.
The contact name appears offline until the
contact accepts the request.
Accept a contact request
Other Skype users can invite you to be on
their contact list. You will be notified of their
request, which you can accept or decline.
Rename a contact
1. In the Skype menu, select [Contacts],
then press OK.
2. Select a contact, then press
OPTIONS.
3. Select [Rename], then press OK.
4. Follow the onscreen instructions to edit
the information.
Block a contact
1. In the Skype menu, select [Contacts],
then press OK.
2. Select the contact, then press
OPTIONS.
3. Select [Block], then press OK. When
prompted, select [Yes] then press OK.
Unblock a contact
1. In the Skype menu, select [Settings] >
[Blocked Contacts].
2. Select the blocked contact, then press
OK.
3. Follow the onscreen instructions to
unblock the contact.
Contact info
To view the details of a contact, select a
contact. The contact details are displayed on
the right of the TV screen.
Contact history
To view the calls which you have had with a
contact, select [History].
To open previous conversations, select a
conversation and press OK.
Note: When you sign in with another Skype
account on this TV, the history of your
previous account is cleared.
Online status
To see if a contact is online, check the online
status icon next to the contact. Your online
status is also shown on your contacts' page.
To change your online status:
1. In the Skype menu, select your Skype
name, then press OK.
2. Select [Online Status], then press OK.
3. Select a status, then press OK.
Make voice and video calls
Make a voice call
You can make a Skype call without video.
Note: Make sure that a video camera is
connected for voice calls also.
1. In the Skype main menu, select
[Contacts], then press OK.
2. Select the contact, then press OK.
3. Select [Call], then press OK.
Voice call options
During a call, press OPTIONS to access
these options:
x [Mute]: Mute the microphone.
x [Hold]: Put the call on hold.
x [End call]: End the call.
x [Dial pad]: Access the dial pad.
x [Start My Video]: Start video camera.
Make a video call
With video calls, you can talk face-to-face
with live video from your TV for free.
1. From the Skype menu, select [Contacts],
then press OK.
2. Select the contact, then press OK.
3. Select [Video call], then press OK.
EN
29
English
Manage contacts
Full screen view
If your contact has a camera connected and
accepts the call, you can see the person on
your TV, in full screen. To check what your
contact can see, view the display in the small
screen on your TV.
1. During the call, press OPTIONS.
2. Select [Full view], then press OK.
Zoom and pan your video
1. In [Full view], select [Zoom] +/- to zoom
in or zoom out.
A zoom and pan icon appears above the
video display.
2. Use the Navigation buttons on the
remote control to pan or tilt the camera.
Video call options
During a video call, press OPTIONS to
access these options:
x [Full view]: See your contact in full
screen view.
x [Dial pad]: Access dial pad.
x [Hold]: Put the call on hold. Full view
will be stopped.
x [Mute]: Mute the microphone.
x [Stop My Video]: Stop the video feed
to your contact's screen.
Call a phone
With Skype, you can call land line phones
and mobile phones.
Note:
No emergency calls with Skype. Skype is not
a replacement for your telephone and
cannot be used for emergency calls.
Before you can make a call, you will need to
purchase Skype Credits or buy a Skype
subscription on your computer. For more
information, see Use more of your TV >
Use Skype > Skype settings. (Page 31)
EN
30
1. In the Skype menu, select [Call phones],
and then press OK.
2. Select [Dial pad] to access the onscreen
dial pad or enter the telephone number with
the Numeric buttons.
3. Once complete, select [Call], and then
press OK to start the call.
4. Optional: To mute your microphone
during your call, press OPTIONS, and
then select [Mute].
5. To end the voice call, select [End call],
and then press OK.
Answer a call
If you are signed in to Skype, you are notified
of incoming calls while watching TV.
1. A message appears onscreen with the
caller's name. Select [Answer], then press
OK.
To enable video, select [Answer with
video], then press OK.
2. To decline, select [Decline], and then
press OK.
Note:
If you accept a call while pausing or
recording a TV program is paused, or while
watching rental movies, Skype will interrupt
the on-going activity.
x A paused TV program is stopped and
the program storage is lost.
x Recording of a TV program is stopped.
You will need to resume recording
again after you finish the call.
x Playback of rental movies is stopped. To
resume watching the rented movie, you
need to go back to the video store or
broadcast service. Some video stores
and services do not allow you to restart
the movie.
If someone calls you on Skype and you are
offline, they can leave a voice message in
your Skype voicemail.
Before you can receive voicemail, you need
to activate voicemail in your Skype account
— this can only be done on your computer.
Play voicemail
1. In the Skype menu, select [History] and
press OK.
2. Select [Voicemails], then press OK.
3. Select the voicemail, then press OK to
play it.
Delete voicemails
1. Select the voicemail from the list and
press OPTIONS.
2. Select [Delete voicemail], then press OK.
Play games
What you can do
On this TV, you can play single or
two-player games, in full-screen with
optimized picture settings for games.
What you need
x
Skype settings
Skype Credit
With Skype Credit, you can call land lines or
mobile phones on your TV. To purchase
Skype Credit, you need to log in to your
Skype account on your computer. The
amount of Skype Credit you purchase will
appear when you log in to your Skype
account on your TV.
Automatic sign in
1. In the Skype menu, select [Settings], and
then press OK.
2. Select [General settings] > [Sign me in
when Skype starts], then press OK.
Change your profile picture
1. In the Skype menu, select your Skype
name, then press OK.
2. Select [Profile picture], then press .
3. Choose a picture, select [Apply], and then
press OK.
Change your Skype password
1. In the Skype menu, select [Settings], then
press OK.
2. Select [Change Password], then press .
3. Follow the onscreen instructions to enter
your current and new passwords.
4. Once complete, select [Apply] and then
press OK.
English
Manage voicemails
x
Connect your game console to this TV.
See Connect your TV > Connect
devices > Game console (Page 46). If
the TV automatically adds the game
console to the Source menu, it also
applies the Game sound preset when
you start playing games.
A two-player kit (PTA436) for
two-player full-screen gaming. The kit
comes with two pairs of gaming glasses,
labeled PLAYER 1 or PLAYER 2.
Start gaming
1. Press
SOURCE.
2. Select the game console, then press OK.
3. If needed, load a game disc on the game
console, then select a game to play.
4. Follow the onscreen instructions to start
gaming.
EN
31
Start two-player full-screen gaming
Some games offer multi-player and
split-screen gaming. The 3D technology of
this TV can display the split-screens as two
full screen views. With the two-player
gaming glasses, each player can experience
different views on the same TV.
1. Press
SOURCE.
2. Select the game console, then press OK.
3. If needed, load a game disc on the game
console.
4. On the game console, select a multi-player
or two-player game, then select split-screen
viewing.
5. Press OPTIONS on the TV remote
control.
6. Select [Picture and sound] >
[Two-player gaming].
7. Select [Top / bottom] or [Side by side],
then press OK.
8. Put on the two-player glasses to view the
different screens.
twice.
9. To exit, press
Tip: To view game menus or scores, press
OK to switch viewing mode.
Game settings
Picture setting for games
You can optimize the TV display for gaming
without picture lag.
1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select [Game or computer] > [Game].
Sound preset for games
You can optimize sound effects for gaming.
1. Press OPTIONS.
2. Select [Picture and sound] > [Sound
style] > [Game], then press OK.
The TV is ready for gaming.
Note: When your gaming session ends,
switch back to your usual sound setting.
EN
32
Set locks and timers
Clock
You can display a clock on the TV. The clock
displays the time that is broadcast by your
TV service operator.
Display the TV clock
1. While you watch TV, press OPTIONS.
2. Select [Clock], then press OK.
The clock is displayed on the top right-hand
corner of the TV screen.
Change the clock mode
You can change the clock mode to
automatic or manual. By default, it is set to
automatic mode, which automatically
synchronizes it to Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual].
1. While you watch TV, press .
2. Select [Setup] > [TV settings] > [General
settings].
3. Select [Clock] > [Auto clock mode].
4. Select [Automatic] or [Manual], then
press OK.
Change the time zone
In countries with clock transmission data, you
can change the time zone if [Auto clock
mode] > [Automatic] is selected.
1. In the [Clock] menu, select [Time zone].
2. Select your time zone, then press OK.
Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to
[Manual].
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Set the time or date with the Navigation
buttons.
3. Select [Done], then press OK.
Age rating
You can switch the TV to standby after a
specified time. During the countdown to the
specified time, you can switch off your TV
earlier or reset the sleep timer.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [Sleep timer].
3. Select the sleep timer duration.
The sleep timer can be set up for to 180
minutes. To switch off the sleep timer, set it
to zero minutes.
4. Press OK to activate the sleep timer.
After the specified time, the TV switches to
standby.
You can set your TV to display only
programs with age ratings lower than your
child’s age. This restriction only applies to
digital channels from broadcasters that rate
their programs according to age.
1. Press .
2. Select [Setup] > [Channel settings].
3. Select [Child lock] > [Age ratings lock].
You are prompted to enter the child lock
code.
4. Enter the child lock code with the
Numeric buttons.
5. Select an age rating, then press OK.
All programs above the selected age rating
are blocked.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
Child lock.
Child lock
To protect children from unsuitable TV
programs, you can lock the TV or block age
rated programs.
Set or change the child lock code
1. Press .
2. Select [Setup] > [Channel settings] >
[Child lock].
3. Select [Set code] or [Change code].
4. Enter the code with the Numeric
buttons.
Tip: If you access the channels from the
channel list, you are prompted to enter your
lock code. If you forget your code, enter
‘8888’ to override any existing codes.
Content rating
You can block programs with objectionable
content.
1. Press .
2. Select [Setup] > [Channel settings].
3. Select [Child lock] > [Content ratings
lock].
You are prompted to enter the child lock
code.
4. Enter your code with the Numeric
buttons.
5. Select the content to block, then press
OK.
The selected content is blocked.
EN
33
English
Sleep timer
4 Change your TV
settings
x
[Pixel Plus HD]: Fine-tune each pixel to
match surrounding pixels and produce a
brilliant, high-definition image.
- [HD Natural Motion]: Remove
motion judders.
- [Advance sharpness]: Enable superior
sharpness, especially on lines and
contours in the picture.
- [Dynamic contrast]: Dynamically
enhance the details in the dark,
medium, and light areas of the picture.
- [Dynamic backlight]: Select a
backlight level to optimize dynamic
power consumption and picture
contrast.
- [Color enhancement]: Dynamically
enhance the vividness and details of
colors.
x
[Advanced]: Access advanced settings
such as gamma, tint settings and video
contrast settings.
- [Light sensor]: Adjust the brightness
of the TV screen automatically
according to the lighting conditions of
the room.
- [Gamma]: Adjust the non-linear
setting for picture luminance and
contrast.
- [Color temp.]: Select a predefined
color temperature.
- [Custom color temp]: Customize
color temperature setting. Only
available if [Color temp.] > [Custom]
is selected.
- [Video contrast] / [3D video
contrast]: Adjust video contrast.
- [Brightness]: Adjust screen brightness.
- [Tint]: Adjust tint.
[Game or computer]: When viewing
content from a connected game
console, select [Game] to apply game
settings. When a computer is
connected through HDMI, select
[Computer]. Make sure that [Format
and edges] > [Picture format] >
[Unscaled] is selected to view
maximum detail.
Picture and sound
Settings assistant
You can select picture and sound settings
with the help of the settings assistant, which
demonstrates the effect of your chosen
setting immediately.
1. While you watch TV, press .
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Continue], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
More picture settings
You can change the settings in the Picture
menu.
1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to change, then press OK.
x [Picture style]: Select a predefined
picture setting.
x [Backlight contrast ] / [3D backlight
contrast]: Adjust the brightness of the
display backlight.
x [Color]: Adjust the color saturation of
the picture.
x [Sharpness]: Adjust the sharpness of
the picture.
x [Noise reduction]: Select the amount
of noise reduction for the picture.
x [MPEG artifact reduction]: Smoothen
transitions and haziness in the digital
picture.
EN
34
x
[Format and edges]: Access advanced
settings to control the display format of
the picture.
- [Picture format]: Change the picture
format.
- [Screen edges]: Change the picture
size.
- [Picture shift]: If available, move the
position of the picture.
More sound settings
You can change the settings in the Sound
menu.
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to change, then press OK.
x
x
x
x
x
x
x
[Sound style]: Access predefined sound
settings.
[Bass]: Adjust the bass level of the
speaker and headphones.
[Treble]: Adjust the treble level of the
speaker and headphones.
[Surround mode]: Select a surround
sound mode to enhance your audio
experience.
[Auto incredible surround 3D]: Select
a surround sound mode to enhance
your audio experience in 3D mode.
[Headphone volume]: Adjust
headphone volume.
[Advanced]: Access advanced settings
to enhance your audio experience.
- [Auto volume leveling]: Enable the
reduction of sudden volume changes,
for example, when switching channels.
- [TV speakers]: Select the preferred
speakers to stream audio from the TV.
See Connect your TV > Set up
EasyLink devices > Select speaker
output (Page 55).
- [Audio Out levelling]: Set the output
level for stereo audio. Select [More] for
higher output level, [Medium] for
medium output level, and [Less] for
lesser output level.
- [HDMI 1 - ARC]: Enable audio
output from the ARC-compliant device
connected to the HDMI 1 connector.
- [Audio out delay]: Automatically sync
the image on the TV to the audio from
a connected home theater. You do not
need to use this setting when
connecting the TV to a Philips home
theater.
- [Audio out offset]: Adjust the setting
for audio output delay. Available if
[Audio out delay] is switched on.
Audio format
If an analog TV channel broadcaster streams
stereo audio in multiple formats, you can
select an audio format.
1. Press .
2. Select [Setup] > [Channel settings] >
[Mono/Stereo].
3. Select a setting, then press OK.
Reset picture and sound
You can restore the default picture and
sound settings, while the channel installation
settings remain the same.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] > [General
settings] > [Factory settings], then press
OK.
3. Select [Reset], then press OK.
All TV settings (except for channel settings)
are reset to the default factory settings.
- [Clear sound]: Enhance sound quality.
- [Audio Out format]: Select the type
of audio output through the digital
audio output connector. Choose
between [Multichannel] and [Stereo].
EN
35
English
x
Channels
Automatic installation
When the TV was switched on for the first
time, a full installation of channels was
performed.
To change your language, country, and
reinstall all available TV channels, you can run
this full installation again.
Start installation
Note: If you are prompted to enter a code,
enter '8888'.
1. Press .
2. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
3. Select your country, then press OK.
4. Select your network, then press OK:
x [Antenna]: Access free-to-air antenna
transmissions.
x [Cable]: Access cable transmissions.
5. Follow the onscreen instructions to select
other options, if any.
The start menu for channel search is
displayed.
6. Select [Start], then press OK.
7. Once the channel search is complete,
select [Finish], then press OK.
LIST to see the channel list.
Tip: Press
Note: When digital TV channels are found,
the list of installed channels may display
empty channel numbers. You can rename
these channels.
EN
36
Install digital channels
If you know the channel frequency of the
channels you want to install, you can search
and store digital channels one by one. For
best results, contact the service provider.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Digital: Reception test] > [Search
channel], then press OK.
4. Press the Numeric buttons to enter the
channel frequency.
5. Select [Search], then press OK.
6. When the channel is found, select [Store],
then press OK.
Update channel list
1. Press .
2. Select [Setup] > [Search for channels] >
[Update channels], then press OK.
3. Follow the onscreen instructions to
update the channels.
Copy channels
ATTENTION: This feature is intended for
dealers and service personnel.
You can copy channel lists from one Philips
TV to another through a USB storage
device. You do not need to search for
channels or install them again on the second
TV. The channel list file is small enough to fit
on any USB storage device.
What you need
Two Philips TVs that have these properties:
x The same country setting
x The same year range
x The same hardware type, as indicated
by the sticker on the back of the TV.
For example: L12M3.1L LA
x Compatible software versions
Note: If you are prompted to enter a code,
enter '8888'.
Step 2: Copy channel list to USB
1. Connect a USB storage device to the first
TV (with the channels installed on it).
2. Press .
3. Select [Setup] > [Channel settings].
4. Select [Channel installation] > [Copy
channel list] > [Copy to USB], then press
OK.
The channel list is copied to the USB storage
device.
5. Disconnect the USB storage device.
Step 3: Copy channels to a TV with no
channels installed
1. Switch on the second TV, on which you
want to copy the channel list.
Initial installation starts.
2. Follow the onscreen instructions and
select the same country as the TV whose
channel list you want to copy.
3. Skip the search for channels.
4. Connect the USB storage device.
5. Press .
6. Select [Setup] > [Channel settings].
7. Select [Channel installation] > [Copy
channel list] > [Copy to TV], then press
OK.
The channel list is copied to the TV.
8. Disconnect the USB storage device.
Step 3: Copy channels to a TV with
pre-installed channels
1. Switch on the second TV, on which you
want to copy the channel list.
2. Press .
3. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The country menu is displayed.
4. Make sure that the country setting is the
same as the first TV.
5. Press .
6. Press [Cancel] to exit.
7. If the country setting is different, reinstall
the second TV to match the country setting
of the first TV. See Change your TV settings
> Reset all (Page 40).
8. Connect the USB storage device to the
second TV.
9. Press .
10. Select [Setup] > [Channel settings].
11. Select [Channel installation] > [Copy
channel list] > [Copy to TV], then press
OK.
The channel list is copied to the second TV.
12. Disconnect the USB storage device.
Language settings
Menu language
1. While you watch TV, press .
2. Select [Setup] > [TV settings] > [General
settings] > [Menu language].
3. Select a menu language from the list, then
press OK.
Audio language
If the TV channel broadcasts multiple or dual
audio languages, you can select your
preferred audio language.
1. While you watch TV, press OPTIONS.
2. For digital channels, select [Audio
language]. For analog channels, select
[Alternate audio]. Press OK to confirm your
selection.
3. Select from the available languages, then
press OK.
Note:
If you have selected [Alternate audio] for
analog channels, select between:
x [Main]: Primary audio language or
x [SAP]: Secondary audio language
EN
37
English
Step 1: Check the country setting
1. Switch on the first TV (with the channels
that you want to copy to the second TV).
2. Press .
3. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The country menu is displayed.
4. Make a note of the current setting.
5. Press .
6. Press [Cancel] to exit.
Closed captions
You can display closed captions at all times
or only when the TV is muted.
Note: Digital TV interactive applications are
not accessible when closed caption text is
switched on.
x Not all TV programs, commercials and
features include closed captioning
information. See your local TV program
listings about channels with closed
captions. The captioned programs are
typically listed with service marks, such
as 'CC', in the TV listings.
Other settings
TV demo
You can watch a demo to find out more
about the features on this TV.
1. While you watch TV, press .
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
Home mode
Switch on closed captions
1. While you watch TV, press OPTIONS.
2. Select [Closed captions].
3. Select [On], then press OK.
Select type of closed captions
1. While you watch TV, press OPTIONS.
2. Select [Caption service].
3. Select the correct type of closed captions,
then press OK.
Some TV settings may not be available in
Shop mode. To make sure that the correct
TV settings are applied, set the TV to Home
mode.
1. While you watch TV, press .
2. Select [Setup], then press OK.
3. Select [TV settings] > [General settings]
> [Location].
4. Select [Home] or [Shop], then press OK.
5. Restart the TV.
Universal access settings
Update software
Switch on
Check version
Some digital TV broadcasters provide special
audio and subtitle features for people who
are hearing or visually impaired. You can
switch these features on or off.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings].
3. Select [Universal access] > [On] or [Off],
then press OK.
1. Press .
2. Select [Setup] > [Software settings] >
[Current software info], then press OK.
Set audio feedback
Update the software through one of these
methods:
x update with USB storage device
x update from digital broadcast
x update from the Internet
When you press a button on the remote
control or TV, you can set the TV to play a
beep.
1. While you watch TV, press OPTIONS.
2. Select [Universal access - key beep] >
[On], then press OK.
EN
38
The current software version is displayed.
Caution: Do not install a lower version of
software than the current version installed
on your product. TP Vision cannot be held
liable or be made responsible for problems
caused by a software downgrade.
What you need
x A USB storage device that has at least
256 megabytes of storage space, is FAT
or DOS formatted, and has its write
protection disabled.
x Access to a computer with a USB
connector and Internet access.
x A file archiver program that supports
the ZIP file format: for example,
WinZip® for Microsoft® Windows®,
or StuffIt® for Macintosh®.
Note: Do not use a USB hard drive.
Download the latest software
1. Connect the USB flash drive to your
computer.
2. On your computer, launch a browser such
as Internet Explorer® or Safari®, and see
www.philips.com/support.
3. Find your TV and locate the software and
drivers available for your TV set. The
software upgrade is available as a
compressed file (*.zip).
4. If the software version is higher than the
version on your TV, click the software
upgrade link.
5. Accept the license agreement and
download the ZIP file to the USB flash drive.
Note: Some Internet browsers, such as
Mozilla® Firefox® or Google® Chrome®,
may download the ZIP file directly to your
computer. If this happens, copy the file to
your USB flash drive.
6. For Internet Explorer: Using a file
archiver, extract autorun.upg from the
downloaded ZIP file. Do not copy or place
the extracted file into a folder.
6. For Safari: When the download is
complete, autorun.upg is automatically
extracted from the ZIP file to your
computer. Copy the file to the USB flash
drive. Do not copy or place the file into a
folder.
7. Eject and disconnect the USB flash drive
from the computer.
Upgrade the TV software
Caution:
x Do not switch off the TV or remove
the USB flash drive during the software
upgrade.
x If a power failure occurs during the
upgrade, do not remove the USB flash
drive from the TV. The TV continues
the upgrade as soon as power is
restored.
x If an error occurs during the upgrade,
retry the upgrade from the beginning. If
the error reoccurs, contact Philips
Consumer Care.
1. Remove all USB devices such as a Wi-Fi
adapter from the TV, then switch on the TV.
2. Connect the USB flash drive to the TV.
The software upgrade starts automatically.
The upgrade is complete when a notification
message appears on screen.
3. Before you restart the TV, disconnect the
USB flash drive from the TV.
4. Press on the remote control — do not
press more than once.
The TV switches off, then back on again. The
upgrade is complete.
5. To prevent accidental updates to the TV
software, reconnect the USB flash drive to
your computer and delete autorun.upg.
Update from digital broadcast
When available, the TV can receive software
updates through digital broadcasts. When a
software update is received, you are
prompted to update the software. We
strongly recommend that you update the
software when prompted.
Follow the onscreen instructions.
If you do not update the TV software when
the update is received, you are prompted to
save the update file. To update the software
later:
1. Press .
2. Select [Setup] > [Software settings] >
[Local updates].
3. Select the file that you downloaded and
follow the onscreen instructions to complete
the update.
EN
39
English
Update with USB
Update from the Internet
You can also update the TV software
directly from the Internet by connecting the
TV to the Internet. See Connect your TV >
Connect to a Network and the Internet
(Page 56).
1. Press .
2. Select [Setup] > [Update software] >
[TV with Internet], then press OK.
3. Follow the onscreen instructions to start
the update.
When the update is complete, the TV
switches to standby and on again
automatically. Wait for the TV to switch
back on. Do not switch on the TV yourself.
Note:
x If the TV is connected to the Internet,
the TV displays the availability of new
software at startup.
x Philips may occasionally push a software
upgrade to your TV over the Internet.
Follow the onscreen instructions to
upgrade the TV software.
Reset all
You can reset all picture and sound settings
and reinstall all TV channels on your TV.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [Reinstall TV], then press OK.
3. Follow the onscreen instructions.
EN
40
About cables
Y Pb Pr
Component video (Y Pb Pr) only transmits
video. For sound, also connect to Audio
Left/Right.
x The Y Pb Pr connection can handle
high-definition (HD) TV signals.
x Match the Y Pb Pr connector colors to
the cable plugs.
Cable quality
Overview
Before you connect devices to the TV, check
the available connectors on the device.
Connect the device to the TV with the
highest quality connection available. Good
quality connectors transfer picture and
sound better.
The connections shown in this user manual
are recommendations only. Other solutions
are possible. For more examples, visit
http://www.connectivityguide.philips.com.
HDMI
An HDMI connection has the best picture
and sound quality.
x An HDMI cable combines video and
audio signals. Connect HDMI for
high-definition (HD) TV signals, and to
switch on EasyLink.
x An HDMI Audio Return Channel
(ARC) connector allows output of TV
audio to an HDMI ARC compliant
device.
x Connect HDMI cables shorter than 5
meters/16.4 feet.
CVBS
CVBS only transmits video. For sound, also
connect to Audio Left/Right.
CVBS connections provides standard picture
quality.
VGA
You can connect VGA to display PC content
on the TV.
VGA only transmits video. For sound, also
connect to AUDIO IN.
EN
41
English
5 Connect your
TV
Connect antenna
Connect the antenna to the TV.
Connect devices
Blu-ray or DVD disc player
Connect the disc player with an HDMI cable to the TV.
Connect the disc player with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
EN
42
English
Connect the disc player with a composite cable (CVBS) and an audio L/R cable to the TV.
TV receiver
Connect the digital TV receiver with an antenna cable to the TV.
Connect the digital TV receiver with an HDMI cable to the TV.
EN
43
Connect the digital TV receiver with a component video cable (Y Pb Pr) and an audio L/R cable to
the TV.
Connect the digital TV receiver with a composite cable (CVBS) and an audio L/R cable to the TV.
Video recorder
Connect the recorder with an antenna cable to the TV.
EN
44
English
Connect the recorder with an HDMI cable to the TV.
Connect the recorder with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
Connect the recorder with a composite cable (CVBS) and an audio L/R cable to the TV.
EN
45
Game console
Connect the game console with an HDMI cable to the TV.
Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the
TV.
Connect the game console with a composite cable (CVBS) and an audio L/R cable to the TV.
EN
46
Home theater
English
Connect an HDMI-ARC compliant home theater with an HDMI cable to the TV.
Connect the home theater with an HDMI cable and a coaxial audio cable to the TV.
Connect the home theater with a component video cable (Y Pb Pr) and an audio L/R cable to the
TV.
EN
47
Connect the home theater with a composite cable (CVBS) and an audio L/R cable to the TV.
Digital camera
Connect the digital camera with a USB cable to the TV.
Digital camcorder
Connect the digital camcorder with an HDMI cable to the TV.
EN
48
Connect the digital camcorder with a composite cable (CVBS) and an audio L/R cable to the TV.
EN
49
English
Connect the digital camcorder with a component video cable (Y Pb Pr) and an audio L/R cable to
the TV.
Connect more devices
USB storage device
Connect the USB hard drive with a USB cable to the TV.
Connect the USB flash drive with a USB cable to the TV.
EN
50
Computer
English
Connect the computer with an HDMI cable to the TV.
Connect the computer with a DVI-HDMI cable and an audio cable to the TV.
Connect the computer with a VGA cable and an audio cable to the TV.
EN
51
Video call camera
Connect the Philips TV video camera - PTA317 (sold separately) with a USB cable to the TV.
Keyboard and mouse
USB keyboard
You can connect a USB keyboard to enter text such as device names on the TV or text for Smart
TV apps.
USB mouse
You can connect a USB mouse to navigate pages on the Internet and click on links.
Note:
x If you need extra USB connectors, use a USB hub. Make sure that you connect the USB hub to
the USB 1 connector on the back of the TV.
x You can also connect the USB mouse to a connected USB keyboard.
Connect the keyboard and mouse with a USB cable to the TV.
When the TV detects the keyboard, you can
select the keyboard layout and test your
selection.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [USB keyboard settings].
3. Change the keyboard settings.
EN
52
TV keys on your keyboard
To make a text entry, use the following keys:
x Enter : Confirm an entry.
: Delete a character
x Backspace
before the cursor.
x Navigation keys: Navigate within a text
field.
When the TV detects the mouse, you can
set the tracking speed.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [Pointer/mouse settings].
3. Change the mouse settings.
Use the USB mouse with your TV
x OK: Left mouse button (left-click).
x
(Back): Right mouse button
(right-click).
x Scroll wheel: to scroll up and down an
Internet page.
Note: The USB mouse cannot navigate in
the TV menus.
Watch connected devices
English
Smart TV keys on your keyboard
x Enter : Confirm an entry.
x Backspace
: Go to the previous
page.
x Navigation keys: Navigate between
fields.
x Tab: Go to the next field.
x Tab and Shift: Go to the previous field.
x Home: Scroll to the top of the page.
x End: Scroll to the bottom of the page.
x Page Up: Scroll up the page.
x Page Down: Scroll down the page.
x +/-: Zoom in or out.
Select a device
Before you can watch a device, connect the
device to the TV. See Connect your TV >
Connect device (Page 42).
Automatically detect a device
When you connect a new HDMI device to
the TV, the device is detected automatically
and added to the Source menu.
Select a device with SOURCE
1. Press
SOURCE.
2. Select a device, then press OK.
Select a device from Home menu
1. Press .
2. Select [Source], then press OK.
3. Select a device, then press OK.
Update the source list
If you add or remove a device, update the
source list.
1. Press
SOURCE.
2. Press OPTIONS.
3. Select [Scan connections], then press OK.
4. Follow the onscreen instructions.
Change device settings
Change the device type
You can change the device type
automatically assigned by the TV.
1. Press
SOURCE.
2. Select the device, then press [Change
type].
3. Select a suitable device type.
4. Select [Continue], then press OK.
Rename a device
You can rename a device after it is added to
the Source menu.
1. Press
SOURCE.
2. Select the device, then press [Rename].
3. Use the onscreen keypad to enter a new
name
4. When complete, select [Done], then
press OK.
EN
53
Reset device settings
You can reset the type and name of the
device to default settings.
1. In the Source menu, select the device and
press OPTIONS.
2. Select [Original name and icon], then
press OK.
3. Select [Yes], then press OK.
Set up EasyLink devices
What you can do
You can get the most out of your
HDMI-CEC-compliant devices with Philips
EasyLink enhanced control features. Connect
your HDMI-CEC compliant devices through
HDMI to your TV and control them at the
same time with your TV remote control.
Note: Other brands describe HDMI-CEC
functionality differently. Some examples are
Anynet (Samsung), Aquos Link (Sharp) or
BRAVIA Sync (Sony). Not all brands are fully
compatible with Philips EasyLink.
After you switch on Philips EasyLink, the
following features are available:
One-touch play
When you play an HDMI-CEC compliant
device, the TV switches on from standby and
switches to the correct source.
One-touch standby
When you press on the TV remote
control, the TV and all HDMI-CEC
compliant devices switch to standby mode.
Auto switch off inactive devices
If a HDMI-CEC compliant device has been
inactive for some time, it switches to standby
mode.
EasyLink remote control
You can control multiple HDMI-CEC
compliant devices with your TV remote
control.
EN
54
System audio control
If you connect an HDMI-CEC compliant
device that includes speakers through the
HDMI ARC connector, you can choose to
hear the TV audio from those speakers
instead of the TV speakers.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link to retain
picture quality.
Maximize display for subtitled video
Some video subtitles can create a separate
subtitle bar under the video, which limits the
video display area. To maximize the video
display area, you can switch on auto subtitle
shift and display the subtitles on the video
image.
What you need
x
Connect a HDMI-CEC compliant
device to the TV. You can connect
more than one HDMI-CEC device. See
Connect your TV > Connect devices
(Page 42).
x Configure each HDMI-CEC compliant
device properly.
x Switch on EasyLink.
Switch on EasyLink
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [EasyLink] > [On], then press OK.
Select speaker output
If you connect multiple HDMI-CEC devices
that support this setting, you can control all
such devices through the TV remote control.
Note: This is an advanced setting. Devices
that do not support this setting cannot
respond to the TV remote control.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink] > [EasyLink remote
control].
3. Select [On] or [Off], then press OK.
If a connected device is HDMI Audio Return
Channel (HDMI ARC) compliant, you can
output TV audio through an HDMI cable.
Additional audio cables are not required.
Make sure you connect the device to the
HDMI ARC connector on the TV. See
Connect your TV > About cables > HDMI
(Page 41).
Switch on HDMI ARC
1. Press .
2. Select [Setup] > [TV settings] > [Sound]
> [Advanced] > [HDMI 1 - ARC].
Tips:
x To switch back to TV control, press ,
then select [Watch TV].
x To control another device, press ,
then select the device from the Home
menu.
3. Select one of the following, then press
OK.
x [On]: Hear the TV audio through the
connected HDMI-ARC compliant
device.
x [Off]: Hear the TV audio through the
TV speakers, or through a device
connected through the digital audio out
connector.
Note: Make sure that all HDMI-CEC settings
are properly set up on the connected device.
Set up TV speakers
1. Press .
2. Select [Setup] > [TV settings] > [Sound]
> [Advanced] > [TV speakers].
EasyLink buttons
You can control HDMI-CEC compliant
devices with these buttons on the TV
remote control:
: Switch the TV and the connected
x
device on or to standby.
x Play buttons: Control video or music
play.
x Numeric buttons: Select a title, chapter
or track.
x OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.
: Display the TV Home menu.
x
Switch off connecting devices
You can also set the TV to switch off the
connecting HDMI-CEC compliant devices if
they are not the active source. The TV
switches the connecting device to standby
after 10 minutes of inactivity.
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [Auto switch off devices] > [On],
then press OK.
3. Select an option, then press OK:
x [Off]: Switch off TV speakers.
x [On]: Switch on TV speakers.
x [EasyLink]: Switch off TV speakers, and
stream TV audio to a connected
HDMI-CEC audio device.
x [EasyLink autostart]: When a
HDMI-CEC audio device is connected,
automatically switch off TV speakers
and stream TV audio to the device.
EN
55
English
Control devices
Change TV audio streaming
You can switch audio between TV speakers
and a connected amplifier at any time.
1. Press OPTIONS.
2. Select [Picture and sound] > [Speakers].
3. Select one of the following, then press
OK.
x [TV]: On by default.
Stream TV audio through TV and the
connected HDMI-CEC audio device
until the connected device switches to
system audio control. TV audio is then
streamed through the connected
device.
x [Amplifier]: Stream audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continues to stream from
the TV speakers. If [EasyLink autostart]
was selected, the TV prompts the
connected device to switch to system
audio mode.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link.
Switch on Pixel Plus Link
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [Pixel Plus Link] > [On], then press
OK.
Maximize video display
Some subtitles create a separate subtitle bar
under the video that limits the video display
area. To maximize the video display area,
you can switch on auto subtitle shift. The
subtitles then display over the video image.
Switch on auto subtitle shift
1. Press .
2. Select [Setup] > [TV settings] > [General
settings] > [EasyLink].
3. Select [Auto subtitle shift] > [On], then
press OK.
EN
56
Connect to a network and
the Internet
What you can do
View Media
If you connect the TV to a home network,
you can play photos, music and videos from
your computer. See Use your TV > Play
multimedia files (Page 18).
Smart TV
If you connect the TV to a home network
with an Internet connection, you can browse
Smart TV. Smart TV offers Internet services
and websites tailored to your TV. Play music
and videos, consult infotainment, rent movies
and much more. See Use your TV > Smart
TV (Page 21).
What you need
Warning: This TV complies with the EMC
directive only when you use a shielded
Cat5 Ethernet cable.
x A computer network that includes:
a) A universal plug-and-play (UPnP)
router and
b) A computer with one of these
operating systems: Microsoft Windows
XP, Microsoft Windows Vista, Mac OS
X, or Linux.
x To connect your TV to computers, you
need to install and configure a media
server on your computer. See Use your
TV > Play multimedia files (Page 18).
x To connect your TV to the Internet,
you also need a high-speed connection
to the Internet.
You can connect this TV to your home
network through a wired or wireless
connection.
x For a wired connection, see Connect
your TV > Connect to a network and
the Internet > Wired connection
(Page 57).
x
For a wireless connection, see Connect
your TV > Connect to a network and
the Internet > Wi-Fi integrated (Page
57).
Wired connection
1. Switch on the router and switch on its
DHCP setting.
2. Connect the router with an Ethernet
cable to the TV.
3. Press , then select [Setup].
4. Select [Connect to network], then press
OK.
5. Follow the onscreen instructions to install
the network.
6. Wait for the TV to find the network
connection.
7. If you are prompted, agree to the End
User License Agreement.
Wi-Fi integrated
This section is only applicable for Wi-Fi
integrated TVs.
You can connect your TV to your home
network wirelessly.
Note:
x The wireless network operates in the
same 2.4 GHz frequency spectrum as
common household devices, such as
Dect phones, microwave ovens or
Bluetooth devices, which can cause
Wi-Fi interference. Move these devices
away from the TV.
x For optimum Wi-Fi performance, place
the TV at a distance of less than 10 m
from the wireless router. Avoid
obstructions such as concrete walls
between the router and the TV.
x Reception quality depends on the
location of the wireless router, and the
local Internet service provider.
x To reduce network traffic, switch off
unused network equipment in the
home network.
x While you play video over your wireless
home network, we recommend that
you use an IEEE 802.11 N router. The
connection speed may differ according
to the operating environment of your
wireless home network.
Start wireless setup
1. Switch on your wireless network router.
2. Press
on the TV remote control.
3. Select [Setup] > [Connect to network],
then press OK.
4. Follow the onscreen instructions.
WPS - Wi-Fi Protected Setup
1. If your router supports Wi-Fi Protected
Setup (WPS), press the WPS button on the
router.
2. After 2 minutes, select [WPS] on the TV,
then press OK.
The TV connects to your network. This
takes about 2 minutes.
EN
57
English
Connect
Most new wireless routers have the WPS
system and carry the WPS logo. The WPS
system uses WPS security encryption and
cannot be combined with devices on your
network that use the WEP (Wired
Equivalent Privacy) security encryption.
If you still need the WEP devices in your
network, install with [Scan] > [Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need.
1. To select a specific network router, press
[Scan] on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
2. Select the router you need, then press
OK.
• If you are connecting to a WPS router,
select [WPS] on the TV.
• If you want to set the PIN code in your
router software to connect, select
[WPS pin] and note down the code.
• To enter the encryption key manually,
select [Standard] and enter the key
when prompted.
Set secured connection with WPS
encryption
1. To set the secured connection with a PIN
code, select the [WPS pin] and press OK.
2. Write down the 8-digit PIN code shown
on TV and enter it in the router software on
your PC.
See the router manual on where to enter
the PIN code.
Set secured connection with WPA
encryption
If your router has Wi-Fi Protected Access
(WPA) security, enter the pass phrase with
the remote control.
1. To enter the encryption key manually,
select [Standard] and press OK.
2. To access the onscreen keyboard, select
the text entry field, then press OK.
EN
58
Set secured connection with WEP
encryption
If your router has WEP security, the TV asks
for the WEP encryption key in hexadecimal
numbers.
1. Locate the hexadecimal key in the router
software on your PC and make a note of the
first key in the WEP keys list.
2. Enter the security key on the TV with the
remote control to connect to the router.
3. If prompted, agree to the End User
License Agreement.
Network settings
TV network name
If you have more than one TV in your home
network, you can rename this TV to give it a
unique name.
1. Press .
2. Select [Setup] > [Network settings] >
[TV network name], then press OK.
3. Use the onscreen keyboard or the remote
control keypad to enter the name.
Switch on Miracast
This TV is a Miracast-certified TV. To
seamlessly display content from a Wi-Fi
device on your TV, switch on Miracast.
Note: Miracast only works with certain
mobile devices.
1. Press .
2. Select [Setup] > [Network settings] >
[Wi-Fi Miracast].
3. Select [On], then press OK to enable
Miracast.
Tip: To clear the history of all Wi-Fi Miracast
devices, select [Setup] > [Network settings]
> [Clear Wi-Fi Miracast devices].
Switch on remote recording
This TV supports remote recording
scheduled from a Wi-Fi device.
Note: If you switch on remote recording,
the TV consumes more power in standby.
1. Press .
2. Select [Setup] > [Network settings] >
[MyRemote Recording].
3. Select [On], then press OK.
General issues
The TV does not switch on:
x Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
x Make sure that the power cable is
securely connected.
When you are turning the TV on, off or to
standby, you hear a creaking sound from
the TV chassis:
No action is required. The creaking sound is
due to the normal expansion and
contraction of the TV as it cools and warms
up. This does not affect performance.
The TV does not respond to remote
control or TV controls when switched on:
The TV requires some time to start up.
During this time, the TV does not respond
to the remote control or TV controls. This is
normal behavior.
If the TV continues to be unresponsive to
the remote control, view the remote control
sensor through a digital camera -- if you
press any button on the remote control and
notice red flickering at the sensor, the
remote control is working but the TV may
need to be checked by Philips Consumer
Care. This troubleshooting procedure is not
applicable to remote controls that are paired
wirelessly with the TV.
When the TV is in standby, a startup splash
screen is displayed, then TV returns to
standby mode:
This is normal behavior. When the TV is
disconnected and reconnected to the power
supply, the startup screen is displayed at the
next startup.
To switch on the TV from standby, press
on the remote control or press any key on
the TV.
The standby light on the TV blinks red:
Disconnect the power cable from the power
outlet. Wait until the TV cools down before
you reconnect the power cable. If the
blinking reoccurs, contact Philips Consumer
Care.
The TV audio is in the wrong language:
Change your audio language by pressing
OPTIONS, then select [Audio language]
or [Alternate audio].
The TV or Smart TV menu is in the wrong
language:
Change the menu to your preferred
language.
For more information, see Change your TV
settings > Language settings > Menu
language (Page 37).
You forgot the 4-digit code to unlock the
channel blocking feature (child lock):
Enter ‘8888’.
You want to upgrade your TV software:
Visit www.philips.com/support and
download the latest software package for
your TV. Software installation instructions
and release notes indicating what's been
updated are also available at the site. Full
instructions on how to upgrade your TV
software are also available at Change your
TV settings > Update software (Page 38).
Channel issues
You want to install TV channels:
See Change your TV settings > Automatic
installation (Page 36) for instructions on
installing analog or digital channels.
Previously installed channels do not appear
in the channel list:
Make sure that the correct channel list is
selected.
No digital channels were found during the
installation:
x See the technical specifications to make
sure that your TV supports SATVD-T
or SBTVD-T in your country.
x Make sure that all cables are properly
connected and that the correct network
is selected.
EN
59
English
6 Troubleshooting
Picture issues
The TV is on, but there is no picture or the
picture is distorted:
x Make sure that the antenna is properly
connected to the TV.
x Make sure that the correct device is
selected as the display source.
x Make sure that the external device or
source is properly connected.
There is sound but no picture:
Make sure that the picture settings are set
correctly.
There is poor TV reception from an
antenna connection:
x Make sure that the antenna is properly
connected to the TV.
x Loud speakers, unearthed audio devices,
neon lights, high buildings, and other
large objects can influence reception
quality. If possible, try to improve the
reception quality by changing the
antenna direction or moving devices
away from the TV.
x If reception on only one channel is
poor, fine-tune this channel.
There is poor picture quality from
connected devices:
x Make sure that the devices are
connected properly.
x Make sure that the picture settings are
set correctly.
The TV did not save your picture settings:
Make sure that the TV location is set to
Home. You can change and save settings in
this mode.
The picture does not fit the screen - it is
too big or too small:
Change to a different picture format.
The picture format keeps changing with
different channels:
Instead of the picture format [Auto zoom],
select a different picture format.
The picture position is incorrect:
Picture signals from some devices may not fit
the screen correctly. Check the signal output
of the device.
EN
60
An "e-sticker" banner displaying
information appears on the TV display:
The TV is in [Shop] mode. To remove the
e-sticker, set the TV to [Home] mode, then
restart the TV. See Change your TV settings
> Other settings > Home mode (Page 38).
The computer display on the TV is not
stable:
x Make sure that your PC uses the
supported resolution and refresh rate.
See Specifications > Display
resolutions (Page 63).
x Change the TV picture format to
[Unscaled].
Sound issues
There is picture but no sound from the TV:
If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
x Make sure that all cables are properly
connected.
x Make sure that the volume is not muted
or set to zero.
x Make sure that the TV speakers setting
is selected. Press OPTIONS, select
[Picture and sound] > [Speakers], and
then select [TV].
x Make sure that the TV audio output is
connected to the audio input on the
HDMI-CEC enabled or EasyLink
compliant home theater device. Sound
should be heard from the home theater
speakers.
x Some devices may require you to
manually enable HDMI audio output. If
HDMI audio is already enabled, but you
still do not hear audio, try changing the
digital audio format of the device to
PCM (Pulse Code Modulation). Refer to
the documentation accompanying your
device for instructions.
There is picture but sound quality is poor:
Make sure that the sound settings are
correctly set.
Network issues
There are problems with HDMI devices:
x Note that HDCP (High-bandwidth
Digital Content Protection) support can
delay the time taken for a TV to display
content from an HDMI device.
x If the TV does not recognize the HDMI
device and no picture is displayed,
switch the source from one device to
another and back again.
x If there are intermittent sound
disruptions, make sure that output
settings from the HDMI device are
correct.
x If you use an HDMI-to-DVI adapter or
HDMI to DVI cable, make sure that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).
You cannot use EasyLink features:
Make sure that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMI-CEC
compatible.
If an HDMI-CEC compliant audio device is
connected to the TV and the TV does not
display any mute or volume icon when the
volume is muted, increased or decreased:
When a HDMI-CEC audio device is
connected this behavior is normal.
USB device content is not displayed:
x Make sure that the USB storage device
is set to Mass Storage Class compliant,
as described in the storage device's
documentation.
x Make sure that the USB storage device
is compatible with the TV.
x Make sure that the audio and picture
file formats are supported by the TV.
Audio and picture files on your USB
storage device do not play or display
smoothly:
The transfer performance of the USB
storage device may limit the data transfer
rate to the TV which causes poor playback.
You want to establish a wireless
connection between your TV and home
network:
Refer to Connect your TV > Connect to a
network and the Internet > Wi-Fi
integrated (Page 57) for instructions on how
to connect your TV wirelessly to your home
network.
Smart TV does not work:
Check that the router is properly connected
to the TV, and that your router has open
access to the Internet. If your router has a
firewall or security settings, make sure that it
allows Smart TV data to pass through check your router documentation for details.
Internet access via Smart TV is slow:
x Try to improve the signal quality
between the router and TV if you are
accessing the Internet wirelessly. Refer
to the router's documentation for
details.
x Always use a fast broadband wherever
possible.
x Update your TV with the latest
software to ensure browsing speed is
optimal.
Your network is slow:
If you are accessing your PC wirelessly, refer
to the router's documentation to improve
the signal quality between the router and
TV.
Wireless network is distorted or not
found:
x Make sure that the wireless network is
not disturbed by microwave ovens,
DECT phones, or other neighboring
Wi-Fi devices.
x If the wireless network is not working,
try a wired network connection.
x Make sure that the firewalls in your
network allow access to the TV wireless
connection.
EN
61
English
Connection issues
Contact Philips
Warning: Do not attempt to repair the TV
yourself. This may cause severe injury,
irreparable damage to your TV or void
your warranty.
If are not able to resolve your problem, refer
to the frequently asked questions (FAQs) for
this TV at www.philips.com/support. You
can also consult and contribute to the Philips
TV community at
www.supportforum.philips.com.
If you wish to speak with or email a Philips
representative, contact the Philips Consumer
Care in your country. You can find the
contact details in the leaflet accompanying
this TV or at www.philips.com/support.
Take note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
EN
62
Power and reception
Product specifications are subject to change
without notice.
Power
x Mains power : AC 110-240V (50-60Hz)
x Standby power consumption : < 0.5 W
x Ambient temperature : 5 to 40 degree
Celsius
x For power consumption, see the
product specifications at
www.philips.com/support.
Reception
x Antenna input: 75 ohm coaxial (F-type)
x TV system: PAL M, PAL N, NTSC M,
SATVD-T, SBTVD-T
x Video playback: NTSC, PAL
Display and sound
Picture / Display
x Display type: LED backlight Full HD
x Diagonal size:
- 107 cm / 42 inches
- 117cm / 46 inches
x Aspect ratio: 16:9 (widescreen)
x Panel resolution:
- For HD sets: 1366 X 768 p
- For FHD set: 1920 x 1080 p
x Picture enhancement: Pixel Plus HD
Picture / Display
x Perfect Motion Rate (PMR): 300 Hz
x Ambilight: Ambilight Spectra 2
x 3D: 3D TV
Sound
x Output power (RMS): 20 W @ 10%
THD
x Incredible Surround
x Clear Sound
x Mono / Smart Stereo / 3D
Display resolutions
English
7 Specifications
Computer formats - HDMI
(Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1920 x 1080 - 60 Hz
Computer formats - VGA
(Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
1920 x 1080 - 60 Hz
Video formats
(Resolution - refresh rate)
480i - 60 Hz
480p - 60 Hz
576i - 50 Hz
576p - 50 Hz
720p - 50Hz, 60 Hz
1080i - 50Hz, 60 Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz
Multimedia
Note: Multimedia file names must not
exceed 128 characters.
Supported multimedia connections
x USB: Connect only USB devices which
consume 500mA of power or less.
- NTFS, FAT 16 (Read only)
- FAT 32
x Ethernet LAN RJ-45
Supported image files
x JPEG: *.jpg, *.jpeg, *.mpo
x GIF (87a, 89a): *.gif
x PNG: *.png
x BMP: *.bmp, *.dib
x JPS: *.jps
x PNS: *.pns
x BMS: *.bms
EN
63
Supported audio/video formats
Supported audio/video formats
Supported audio/video formats
Supported audio/video formats
EN
64
English
Supported audio/video formats
Supported audio/video formats
Supported audio formats
Supported audio formats
Supported subtitle formats
EN
65
Character encoding
• Windows-1250 (CP-1250): Central
Europe and Eastern Europe Latin
(Czech, Hungarian, Polish, Slovak,
Slovenian, Croatian, Romanian, Serbian)
• Windows-1251 (CP-1251): Cyrillic
• Windows-1252 (CP-1252): Western
Europe Latin
• Windows-1253 (CP-1253): Greek
• Windows-1254 (CP-1254): Turkish
• UTF-8: Multi-byte character encoding
for Unicode
Supported DLNA-compliant media server
software
• Windows Media Player (Microsoft
Windows)
• Twonky Media (Microsoft Windows,
Mac OS X)
• Sony Vaio Media Server (Microsoft
Windows)
• TVersity (Microsoft Windows)
• Nero MediaHome
• DiXiM (Microsoft Windows XP)
• Macrovision Network Media Server
(Microsoft Windows)
• Fuppes (Linux)
• uShare (Linux)
EN
66
Connectivity
Rear
• NETWORK: Ethernet LAN RJ-45
• AUDIO IN: DVI/VGA (stereo 3.5mm
mini-jack)
• VGA: PC input
• SERV.U: Service port
• CVBS/Y, Pb, Pr: Component/Composite
video
• L, R: Component/Composite Audio
• SPDIF OUT: Cinch (Digital Audio Out)
• HDMI 2
• HDMI 1 ARC: Audio Return Channel
• ANTENNA: 75 ohm coaxial
Side
• USB 1, USB 2
• HDMI
• Headphones: stereo 3.5mm mini-jack
Help version
UMv 50087813020
8 Index
child lock • 33
3
closed captions • 38
3D • 16
3D glasses, care • 5
3D, 2D to 3D • 17
3D, change format • 17
3D, health warning • 4
3D, start • 17
3D, switch off • 17
A
age rating • 33
Ambilight • 17
Ambilight, lounge light • 18
Ambilight, settings • 18
Ambilight, switch on • 17
amplifier, select output • 55
audio language • 37
auto subtitle shift • 56
Auto switch off, devices • 55
English
clock • 32
codecs, supported • 63
computer, play files • 18
connect, computer • 51
connect, digital camcorder • 48
connect, digital camera • 48
connect, disc player • 42
connect, external hard disk • 50
connect, game console • 46
connect, home network • 57
connect, home theater • 47
connect, Internet • 56
connect, keyboard • 52
connect, mouse • 52
connect, recorder • 44
connect, TV receiver • 43
connect, USB device • 50
connect, video call camera • 52
connected device, rename • 53
connectivity • 66
C
connectivity guide • 9
cables • 41
connectors • 41
channel list • 13
contact Philips • 9
channel list, copy • 36
content rating • 33
channels • 13
controls • 10
channels, favorites • 13
CVBS, composite video • 41
channels, hide or unhide • 13
D
channels, install (automatic) • 36
channels, install (digital) • 36
channels, logo • 13
channels, reinstall • 40
channels, rename • 13
channels, sort • 13
channels, switch • 13
channels, update • 36
demo • 38
devices, watch • 53
digital camcorder • 48
digital camera • 48
digital channels, install • 36
digital radio • 13
disc player, connect • 42
EN
67
display resolutions • 63
display specifications • 63
DivX VOD • 20
DLNA • 18
DTVi • 23
I
install channels, automatic • 36
Interactive TV • 23
Internet, connect • 56
K
E
EasyLink • 54
EasyLink, controls • 55
Kensington lock • 5
key beep • 38
EasyLink, enable • 54
L
EasyLink, features • 54
language, menu • 37
EasyLink, onscreen control • 11
lock TV • 5
EasyLink, remote control • 55
lounge light • 18
EasyLink, TV speakers • 55
energy efficient settings • 8
M
EPG, broadcaster • 15
media server program • 18
EPG, Internet • 16
mode, home or shop • 38
external hard disk • 50
Multimedia Home Platform (MHP) • 23
multimedia, play files • 18
F
multimedia, play options • 19
favorite channels, list • 13
multimedia, supported formats • 63
G
N
game console, connect • 46
network settings • 58
game settings • 32
network, connect • 56
games, two player • 32
network, TV name • 58
H
O
HbbTV • 23
online forum • 9
HDMI • 41
online video, rent • 22
HDMI ARC • 41
help, onscreen • 9
P
Help, version • 66
pause TV • 24
home mode • 38
pause TV, USB hard drive • 24
home network • 56
PC, display resolutions • 63
home theater, connect • 47
Philips video camera • 52
picture format • 15
picture settings • 34
EN
68
settings, picture • 34
Pixel Plus link • 56
settings, sound • 35
placement, stand or wall • 5
shop mode • 38
placement, tips • 5
Skype • 28
play, computer files • 18
Skype, block contact • 29
play, USB files • 19
Skype, contacts • 29
power specifications • 63
Skype, receive call • 29
presets, picture and sound • 14
Skype, settings • 31
product support • 9
Skype, setup • 28
program guide, broadcaster • 15
Skype, sign in • 28
program guide, Internet • 16
Skype, video call • 29
R
Skype, voice call • 29
Skype, voicemails • 31
rear controls • 10
sleep timer • 33
record TV, one-touch • 26
Smart TV, apps • 22
record TV, USB hard drive • 25
Smart TV, browse • 21
record, TV programs • 25
Smart TV, network • 56
recorder, connect • 44
Smart TV, start • 21
recordings, delete • 27
smartphone control • 11
recordings, schedule • 26
software, check version • 38
recordings, watch • 27
software, digital update • 39
recycle • 9
software, Internet update • 40
reinstall • 40
software, USB update • 39
remote control • 10
sound settings • 35
rename channels • 13
sound settings, reset • 35
rename, connected device • 53
sound specifications • 63
rent, online video • 22
source, select • 14
S
source, update • 53
safety • 3
schedule, recordings • 26
screen care • 5
sensors • 10
English
picture settings, reset • 35
standby • 12
standby LED • 10
sustainability • 8
switch TV on, off • 12
settings assistant • 34
settings, audio format • 35
settings, game • 32
settings, network • 58
EN
69
T
trademarks and copyrights • 7
TV controls • 10
TV guide, broadcaster • 15
TV guide, Internet • 16
TV receiver, connect • 43
TV speakers, mute • 12
U
universal access, enable • 38
update, source list • 53
USB keyboard • 52
USB mouse • 52
USB, play files • 19
V
VGA • 41
video call camera • 52
video store • 22
volume • 12
W
Wi-Fi integrated, setup • 57
Y
YouTube • 21
YPbPr, component video • 41
EN
70
Centros de Servicios Autorizados
CAPITAL FEDERAL
Necochea
Pehuajó
Pergamino
Pergamino
San Nicolás
San Nicolás
San Pedro
Tandil
Tres Arroyos
Zárate
ATTENDANCE S.A.
Av. Monroe 3351 C.A.B.A
Tel.: 4545-5574 / 0704 ó 6775-1300
DIG TRONIC
Av. San Martín 1762 (C1416CRS) C.A.B.A
Tel.: 4545-5574 / 0704 ó 6775-1300
ELECTROTEL
Centro: Av. Córdoba 1357 C.A.B.A. Tel.: 4811-0084 al 9
Caballito: J.M. Moreno 287 C.A.B.A. Tel.: 4903-6967/6854/8983
Belgrano: Virrey del Pino 2527 C.A.B.A. Tel.: 4788-2071
Mataderos: Saladillo 2527 C.A.B.A. Tel.: 5554-9400
GMS Electronica
J. B. Alberdi 3425 - Tel.: 4619-1631
BUENOS AIRES
Azul
Herlein Raúl Horacio
Bahía Blanca
Neutron **
Bahía Blanca
Citta Respuestos *
Baradero
Juan F. Mazzarella
Berisso
Electrónica Bander
Bolivar
Total Audio
Campana
Electricidad Krautor*
Coronel Suarez Refrigeración Polar*
Dolores
Tauro Electrónica S.H.
Junín
Junín Service**
Junín
José Capurzio
Junín
Morganti Walter*
La Plata
Highvisión
Luján
Electro Hogar
Mar de Ajó
Tauro Electrónica
Mar del Plata
Service Integral
Mar del Plata
Central Service
Av. 25 de Mayo 1227
Soler 535
H. Yrigoyen 176
Araoz 847
Calle 158 107
Av General Paz 125
Lavalle 415
Lamadrid 1946
Cramer 199
Alsina 537
Primera Junta 436
Gral. Paz 433
Calle 60 1033
25 de Mayo 280
Jorge Newbery 1434
Salta 3519
Olazábal 2249
(02281) 428719
(0291) 4535329
(0291) 4520881
(03329) 484321
(0221) 4614984
(02314) 425649
(03489)432919
(02926)424030
(02245) 444300
(02362) 442754
(02362) 424235
(02362) 430670
(0221) 4520180
(02323) 438931
(02257) 421750
(0223) 476-0108
(0223) 4721639 ó
4729367
Importante:
(*) Solamente reparan pequeños aparatos domésticos, Ej. Afeitadora, Corta Cabello y Corta Barba, Depiladoras, Planchitas de pelo, Secadores de Pelo, Licuadoras, Mixer, Batidoras, Cafeteras, Jugueras, Aspiradoras, Enceradoras, Planchas.
(**) Solamente reparan Audio Video, Ej. Televisores, DVD, Home Theater, Micro Sistemas, MP3,MP4, Radio
Grabadores, Auto Radios, Teléfonos.
Los Talleres que no tienen asterisco reparan ambas lineas de productos (pequeños aparatos domésticos y Audio y Video).
Electrónica Camejo
Calcagni Carlos Alberto
ACV Sistemas **
El Service *
Servitec **
Sodo SRL*
Electrónica Menisale
Lazzarini Oscar Rafael
Saini Fabián y Sergio
Electrónica Spinozzi
Calle 63 Nº 1745
Zuviría 794
Dr. Alem 758
Italia 70
Bv. Alvarez 148
Luís Viale 362
Mitre 1695
Pellegrini 524
Av. Belgrano 562
Ituzaingo 1030
(02262) 426134
(02396) 472665
(02477) 421177
(02477) 418000
(03461) 454729 ó 429578
(03461) 428955
(03329) 425523
(02293) 442167
(02983) 427369
(03487) 427353
GRAN BUENOS AIRES
Avellaneda
Casa Torres S.A.
Av. Mitre 2559
F. Varela
Casa Torres S.A.
San Martín 2574
G. Laferrere
ElectroByte Soluciones y Servicio Olegario Andrade 6018
Lanús
Casa Torres S.A.
Anatole France 2018
L. de Zamora
Attendance S.A. Lomas
Laprida 485 (Av H Irigoyen 9228)
L. de Zamora
Electrotel Lomas
Italia 78
Marcos Paz
Tecnicentro
Monteagudo 208
Moreno
Argentrónica
Teniente Camilli 102
Morón
Servotronic Morón
Ntra. Sra. Buen Viaje 1222
Olivos
Electrotel Olivos
D F Sarmiento 3562
Quilmes
Casa Torres S.A.
Pellegrini 140
Quilmes
Electrotel Quilmes
Moreno 538
Ramos Mejía
Electrotel Ramos Mejia Belgrano 224
Ramos Mejía
Avesa SRL. *
Bolivar 675
Tigre
Pantronic
Alte Brown 529
San Isidro
Pantronic (Suc. S. Isidro)
Av. Centenario 899
San Miguel
Tecno San Miguel
Belgrano 999
Villa Ballester
Servotronic V. Ballester José Hernández 3064
4255-5854
4255-5854
4626-1322
4255-5854
4292-8900 / 4239-2115
4244-0397
(0220) 4770334
(0237) 463-9500
4627-5656
4799-1398
4255-5854
4254-5291
4656-0619
4654-6878/8003
4749-4040
4747-4040
4664-4131
4767-2515
CATAMARCA
Catamarca
Omicon Centro de Serv.
San Martín 225
(03833) 451498
CHACO
Resistencia
Freschi Jorge Oscar
Av. Hernandarias 431
(03722) 426030
CHUBUT
Trelew
C. Rivadavia
Pto. Madryn
Esquel
Fagtron Electrónica
C.A.S. SRL (Televic)
Center Electrónica
Laboratorio Electrónico
Brasil 253
Alem 145
Sarmiento 588
Mitre 738
CÓRDOBA
Alta Gracia
Servicio Técnico Especializado
Río Cuarto
Capaldi Abel
Córdoba Cap.
Electrotel Suc. Cba.
Villa María
Grasso Electrónica **
Río Tercero
Service Omega
Velez Sarsfield 19
Paunero 832
Avenida Colón 544
Bv. Alvear 541
Homero Manzi 149
(02965) 427073
(0297) 4442629
(02965) 5458439
(02945) 451457
(03547) 430848/15459936
(0358) 4623003
(0351) 4255999
(0353) 4521366
(03571) 423330
Villa María
Córdoba Cap.
Vanguard Sist. Elect.
Servelco SRL
CORRIENTES
Corrientes
Los Magos
México 421
Pje.E. Marsilla 635
(0353) 4532951
(0351) 4724008
San Martin 589
(03783) 466791
ENTRE RÍOS
Gualeguaychú
Ctro. Serv. Electrónicos
Paraná
Laser Electrónica
Concordia
El Taller
Concep. del Uruguay LTV Service
Santiago Díaz 22
Pascual Palma 382
San Martín 297
9 de Julio 1442
(03446) 428380
(0343) 4313056
(0345) 4217069
(03442) 433026
FORMOSA
Formosa
Vallejos Televisión
Mitre 276
(03717) 435985
JUJUY
Perico
S. S. de Jujuy
Electrónica PAL-COLOR Escolastico Zegada 47
Total Service Jujuy
Urdininea 233
LA PAMPA
Santa Rosa
Tecnocyf Centro de Serv. Av. Roca 179
Gral. Pico
Electrónica M.D.
Calle 20 Nº 370
(0388) 4911696
(0388) 4310911
(02954) 426602 / 426836
(02302) 425047
LA RIOJA
La Rioja
Telecolor
España 450 (Barrio. Evita)
MENDOZA
Mendoza
Video Sistemas**
Mendoza
Araujo Service*
San Rafael
Diger Service Técnico
Fray Luis Beltrán 1729 (Godoy Cruz) (0261) 4241111
Belgrano 1845 (Godoy Cruz)
(0262) 4249930
Av. Mitre 277
(02627) 425620 (int. 11)
MISIONES
L. N. Alem
Megatones
Posadas
Electrónica Cejo
El Dorado
TeleSon
C. de Obligado 247
Av. López Torres 2623
Polonia 24
NEUQUEN
S.M. Andes
Cutral-Có
Neuquén
Neuquén
Elordi 614
Di Paolo 570
Fotheringham 110
J.A. Roca 1124
Zener Electrónica
Servitran
Tevesur
Gatti Electrónica
(03822) 46-5354
(03754) 421236
(03752) 425921
(03751) 423043 /424014
(02972) 425155
(0299) 4961957
(0299) 4430679
(0299) 4434855/1489
RÍO NEGRO
Río Colorado
A.V.C. Electrónica
Saenz Peña 297
Villa Regina
Servicio Técnico Fioretti Saavedra 125
Bariloche
HC Electrónica **
Av. 12 de Octubre 1575
(02931) 432688
(02941) 463297
(02944) 430219
SALTA
Salta
Alvarado 1066
(0387) 4317256
SAN JUAN
San Juan
King Electrónica
San Juan
Techno Center
Mendoza 802 (Sur)
Sarmiento Sur 154
(0264) 4228918
(0264) 4276866
SAN LUIS
Villa Mercedes Electrónica Ciancia
San Luis
Electrónica Nico S.R.L.
León Guillet 380
Junin 679
(02657) 423990
(02652) 428747
(02966) 420456
Service Salta
TIERRA DEL FUEGO
Ushuaia
Digital Sur
Río Grande
Electrónica Sur
Gob. Campos 664
Laserre 670
TUCUMÁN
S.M. Tucumán
Edu-Mag **
Marco Avellaneda 129
S.M. Tucumán
Breslauer Respuestos * San Lorenzo 15
PARAGUAY
Asunción
SCJ Service
Asunción
Umesys Service
Asunción
Sirio SRL
Ciudad del Este Audio & Video
C. Oviedo
Electrónica Total
Concepción
Electrónica Concepción
Encarnación
M´s Service Store
San Estanislao
Servimas Electrónica
P. Juan Caballero VICSA Audio & Video
Villarrica
Electrónica Nestor
Av. Gral. Artigas 1295
R.I.6 Boquerón 1559
Iturbe 470 c/C. Cora
P. de Patria c/Av. Caballero
Gral. Eugenio A. Garay 148
14 de Mayo y Mcal. Estigarribia
Villarrica 472
Las Residentas 410
J. de J. Martinez 498 Esq. C. Corá
Rep. Argentina c/Itá Ybate
URUGUAY
Montevideo
C.E.V. **
Uruguay 1325
Montevideo
Makirey S.A.**
18 de Julio 2302
Montevideo
Centr. de Reparaciones * Yi 1436
(02901) 434867
(02964) 422566
(0381) 4229078
(0381) 4215225
(00595 21) 203465
(00595 21) 623835
(00595 21) 449753
(00595 61) 502962
(00595 21) 205466
(00595 3312) 40960
(00595 71) 202616
(00595 343) 420657
(595336) 272329
(0595541) 40803
(005982) 9011212
(005982) 4081770
(005982) 9084914
Importante:
(*) Solamente reparan pequeños aparatos domésticos, Ej. Afeitadora, Corta Cabello y Corta
Barba, Depiladoras, Planchitas de pelo, Secadores de Pelo, Licuadoras, Mixer, Batidoras,
Cafeteras, Jugueras, Aspiradoras, Enceradoras, Planchas.
(**) Solamente reparan Audio Video, Ej. Televisores, DVD, Home Theater, Micro Sistemas,
MP3,MP4, Radio Grabadores, Auto Radios, Teléfonos.
Los Talleres que no tienen asterisco reparan ambas lineas de productos (pequeños aparatos domésticos y Audio y Video).
AP/10/11
ARGENTINA
Tel.: 0800-444-7749 (Número gratuito)
ARGENTINA - BUENOS AIRES
Tel.: 0810-444-7782
SANTA CRUZ
Río Gallegos
Cosmos Video
Mariano Moreno 46
SANTA FE
Rosario
Rosario
Santa Fe
Santo Tome
Venado Tuerto
Rafaela
Rosario
Reconquista
Imagen y Sonido
Electrotel Rosario
Litoral Service SRL
Electrónica S.XXI
Degiovanni Adalberto J.
Francesconi Rep. Elect.
SIP. SRL
Sponton Alfredo
Pte. Roca 371
(0341) 4401598
Maipú 828
(0341) 4217700
9 de Julio 2785
(0342) 4533563
Falucho 2201
(0342) 4751528
Av. H. Yrigoyen 1289
(03462) 424613
Bv. Roca 475
(03492) 422292/ 502292
España 470
(0341) 4252625 ó 4258180
Habbergger 1516
(03482) 421523
SANTIAGO DEL ESTERO
Sgo. Del Estero Barchini Raúl Enrique
Rivadavia 833
(0385) 4213872
PARAGUAY
Tel.: 009-800-54 1 0004
(Número gratuito)
URUGUAY
Tel.: 0004-054 176
(Número gratuito)
Para más Información visite nuestra web
www.philips.com.ar
All registered and unregistered trademarks are the property of their respective owners. Specifications are subject to change without notice.
Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license
from Koninklijke Philips Electronics N.V.
2013 © TP Vision Netherlands B.V. All rights reserved.
www.philips.com