M-725 DR

User Manual

CAR RADIO DVD PLAYER WITH USB & SD

Please read the instruction carefully before operating the unit.

English

BEFORE YOU BEGIN

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

Important safeguards

Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle’s electrical system.

Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body.

Make sure all the connections are completely correct before turning on your unit.

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.

Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire.

After completing the installation and beginning to play the unit(including replacing the battery), press RESET button on the base with pointed object (such as ballpoint pen) to set the unit to initial status.

Do not attempt to modify the unit, modifying the unit may cause an accident.

Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle is between +60°C and -10°C before turning on your unit.

To avoid the driver distract his attention from, please install the unit in an apt place.

Using the unit after starting the engine, otherwise the unit can not be started, because the electric energy of battery was used up.

Do not use the unit in extreme high temperature or such low temperature conditions, and also avoid humidity and direct sunlight, otherwise the electric energy of battery will be wasting for the high temperature.

Take care of the magnetism of the unit. Do no put the credit card, cassette or watch around the unit, otherwise they would be broken or some information in them loses.

To avoid disturbing the video frequency, keep far away from the unit when using your phone.

Do not put the remote control under high temperature or where the sun strikes it, or else the remote control can not work normally.

Please warn children not to play the motorized screen which might hurt their fingers.

When driving, cannot watch the video and the pictures, a warning would be display on screen.

When you select or create a disc to play with this product, please note:

• Avoid long file names! It is suggested to name the file with no much than 7 characters.

• The total number of files on the disc should not exceed 1633.

• The maximum number of directories should not exceed 195.

• The maximum depth level of directories should not exceed 10.

• File system(SD & USB): FAT 32 and FAT 16.

GB - 1

Disc and files you can play

In spite of progress made to ensure playability of all discs types, it is not possible to guarantee playback of discs which are not in conformity with DVD, CD, VCD or SVCD standards.

This unit may not play some recordings or files on CDs or DVDs due to differences in recording formats, software used and disc types. The recordable discs may need a longer reading time than normal discs.

Note: Connect one clip end of the provide Ground line (black) to the fixing screw bolt, and connect the other end to the negative pole of the power source. Otherwise the video on screen may flash.

NOTE

1.For safety reasons, connect the parking line (GREEN) to the parking brake switch.

Video will be displayed only when the car is stopped and the parking brake is on.

2.If you don’t want to use this function, connect the wire to the ground.

The Description of the Wiring Diagram for Socket 1

WIRING CONNECTION

The Description of the Wires Connection.

GB - 2

The Description of the Wiring Diagram for Socket 2

Note:

1. Only Speakers with 4 ohms impedance may be used.

2. Ensure that the blue automatic antenna cable does not make contact with any ground connection.

3. Do not use AV IN jack on front panel & RCA terminal at the back at the same time for the AUX source.

4. When Rear view camera function is ON, panel buttons are locked and sound is off but music continues reading in DVD/USB/SD card.

GB - 3

5. Make sure to connect the color coded leads according to the diagram, incorrect connections may cause the unit to malfunction or damage the vehicle’s electrical system.

6. Do not connect the ignition wire (red) and the battery wire (yellow), it may cause a short circuit, even result in fire.

UNPACK YOUR UNIT

When you unpack your new car radio, make sure that you have removed all the accessories and information papers:

Main unit with connector

User manual

Accessories:

Mounting

Sleeve x1

Rear Mounting

Bolt x1 Washer x2

Spring

Washer x1

Outer Trim

Frame x1 Steel Bar x1

Key x2 Screw x1 AV Cable x1

9

AUX cable x1 USB cable x1 ISO Cable

Nut x1 Ground Cable x1 Protective Case x1

15

Remote control x1

16

INSTALLATION

GB - 4

MAIN UNIT

BEND THESE CLAWS

OUTWARD FOR A

TIGHT FIT, IF NECESSARY.

OUTER TRIM FRAME

DETACHABLE

FRONT PANEL

LOCATION OF THE CONTROLS

1. OPEN button: To open/close the touch screen.

2. PWR/MUTE button: To turn unit on /off. To mute or restore sound.

3. Touch screen

4. AV IN jack

5. Disc Slot

6. USB port

7. SD/MMC Card Slot

8. MODE button: To select function mode : RADIO, DVD, CARD, USB, AV IN or BLUETOOTH.

9. Volume knob : To adjust the volume.

10. button: To directly access the previous chapter (DVD) or track (CD).

11. button: To directly access the next chapter (DVD) or track (CD).

12. 1/ (Play/pause) button: To select preset channel 1 in radio mode. To start or pause playback.

13. 2/ INT (Intro) button: To select preset channel 2 in radio mode. To start/ cancel intro playback.

14. 3/ RPT (Repeat) button: To select preset channel 3 in radio mode. To repeat playback.

15. 4/ RDM (Random) button: To select preset channel 4 in radio mode. To start/ cancel random

playback.

16. 5/ -10 button: To select preset channel 5 in radio mode. To skip backward 10 tracks (mp3 only).

17. 6/+10 button To select preset channel 6 in radio mode. To skip forward 10 tracks (mp3 only).

18. BAND/ Dial /Answer button: To select band: FM1, FM2, F3, MW1 or MW2. To dial or

answer the phone.

GB - 5

19. APS/ (Hand up)button: To auto preset radio stations. To hang up the call.

20. EJECT button : To eject the disc from disc slot.

21. RESET button : To reset the unit.

22. Small LCD display

23. Remote Sensor

24. REL (Release) button: Press to release the front panel.

25. MIC (Microphone)

Remote control

R1. PWR (Power) button : To turn unit on /off

R2. EQ/OPEN button : To select the desired

preset equalizer ROCK, POP & CLASS.

To open/close the touch screen.

R3. BAND button : To select band: FM1, FM2,

FM3 , MW1 or MW2.

R4. (Screen angle) button: To adjust the

screen angle.

R5. MUTE button : To mute or restore sound.

R6. SEL (Select) button: To adjust the sound

setting.

R7. VOLUME+/- button: To adjust the volume.

R8. MODE button: To select function mode : RADIO,

DVD, CARD, USB, AV IN or BLUETOOTH.

R9. SETUP button: To enter the Setup menu

R10. MENU button: To access disc menu.

R11. ▲button : Move up during menu navigation.

R12. ▼button : Move down during menu navigation.

R13. ►button: Move right during menu navigation.

R14. ◄button: Move left during menu navigation.

R15. OK button: To confirm the selection during

menu navigation.

R16. button: To directly access the next

chapter (DVD) or track (CD).

R17. button: To stop playback.

R18. (play/pause) button: To start or pause playback.

R19. / CLEAR button: To directly access the previous chapter (DVD) or track (CD).

To clear input.

R20. Number buttons ( 1,2…0/10)

TA (Traffic announcement) : To access TA mode.

AF (Alternative frequency) : To access AF mode.

6/+10 : Short press for number 6. Long press to skip forward 10 tracks (mp3 only).

5/-10 : Short press for number 5. Long press to skip backward 10 tracks (mp3 only).

R21. CLK (clock)button : To check the clock time.

R22. 10+/PTY button: To access PTY mode.

R23. LOC/SLOW-FWD/ button: To access LOC function. To play at slow motion.

R24. (Camera angle)/ ST/ # button : To access the camera angle function for DVD

disc. To turn ON/OFF FM stereo mode.

GB - 6

R25. SEARCH button: To search for a desired title, chapter or Track.

R26. APS/ (Hang up)button : To auto preset radio stations. To hang up the phone.

R27. ZOOM button: To access the zoom function

R28. INT (Intro)button: To start/ cancel intro playback.

R29. RPT (Repeat)button : To repeat playback .

R30. RDM (Random)button : To start/ cancel random playback.

R31. A-B (Repeat A-B) button: To repeat section A to B

R32. AUDIO button: To change the audio setting (DVD only).

R33. TITLE/PBC /PAIR button: To access the disc title menu. To turn PBC mode on/

off for VCD. To connect the unit to your mobile phone in Bluetooth mode.

R34. SUBTITLE /REDIAL button: To change the subtitle setting. To redial.

R35. PROG (Program)button: To program playback sequences.

R36. OSD button: To show status information on the screen.

R37. LOUD button (loudness): To turn ON/OFF loudness function.

R38. TEL / STEP button :To dial or answer the phone. To play frame by frame

Note: “INVALID KEY“ will be displayed if the function you select is not available.

The remote control operates on 1pc “CR2025” lithium battery (included).

To power up the remote control, remove the insulation tab from the back of unit.

REPLACING BATTERY FOR THE REMOTE CONTROL

1.Push the button toward right.

2.Pull the battery loader out.

3.Insert one “CR2025” size battery with the positive side (+) facing up.

4.Replace the cover.

Notes on batteries

• Never recharge the batteries, apply heat to them or take them apart.

• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

• Do not throw the batteries in fire!

• Attention should be drawn to the environmental aspects of battery disposal.

• If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.

• Please respect the environment. Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.

CAUTION:

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

GB - 7

BASIC OPERATION

To turn ON/OFF the unit

Press PWR button to turn on the unit. Long press PWR button to turn off the unit.

Note: When the unit is off. Pressing any button except REL can turn on the unit.

To open / close the touch screen

Press OPEN button to open or close the touch screen.

You can adjust the viewing angle of the screen with button on remote control.

To select function mode

- With front panel and remote buttons

* Press the MODE button to select RADIO, DISC (After inserting a disc), USB

(After inserting a USB device), Card (After inserting a MMC or SD card), AV IN or

BLUETOOTH.

- With the touch screen

* Tap icon on touch screen to display the main menu as shown below. Then tap the icon to select your desired function mode.

To reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit.

Release the front panel first, and then press RESET button with a pointed object (such as a ballpoint pen) to set the unit to initial status.

Note: When some errors occur on the display, you can also press RESET button to resume to normal, and it will erase the clock setting and some memorized functions.

To adjust the sound settings

To adjust the sound settings, press SEL button repeatedly to select “BAS” (BASS),

“TRE”(TREBLE), “BAL” (BALANCE), “FAD”(FADER) or “VOL”(VOLUME). Then press

VOLUME+/- buttons on remote control or rotate volume knob on main unit to adjust the value.

ESP function

The ESP (Electronic Shock Protection) works for all formats of discs.

Select chapter/track with the number buttons

When playing DVD/MP3/CD discs, press one of the 1~9 and the 0/10 number buttons to directly select and play the 1st to 10th track / chapter (the 0/10 button is used as the 10 button).

If you want to play the track/chapter with serial number bigger than 10, use the 10+,

1~9 and 0/10 button.

Example 1, to play the 13th track/ chapter, firstly press the 10+ button once, then press the 3 button.

Example 2, to play the 30th track/chapter, firstly press the 10+ button for 3 times, then press the 0/10 button.(the 0/10 button is used as the 0 button)

Note: pressing and holding the +10 or -10 buttons will allow you to play the next 10 or last 10 chapter/track (MP3 only).

LISTENING TO THE RADIO

Press MODE button repeatedly to select RADIO mode.

To check the clock time

Press CLK button to check the clock time.

To select a preset EQ mode

Press the EQ button to select the preset music equalizer curves: POP, ROCK,

CLASS, EQ OFF.

To turn on/off LOUDNESS mode

Press the LOUD button to turn on/off LOUDNESS mode. When turning on

LOUDNESS mode, it will enhance bass level immediately when the bass is not enough.

GB - 8 GB - 9

Selecting Band

In radio mode, repeatedly press BAND button to select bands in following order: FM1

-> FM2 -> FM3 -> MW1 -> MW2.

Manual tuning

Briefly press or button to manually search up or down with step by step for your desired station from the current frequency.

Automatic tuning

Long press or button to automatically search up or down for an available station from the current frequency.

APS function

In radio mode

1) When pressing and holding the APS button, the radio searches on the current band for the strongest signal stations and stores them automatically in memory. It can store up to 18 stations in FM (6x FM1, 6x FM2 and 6x FM3) and 12 in MW (6x MW1 and 6x

MW2).

2) When pressing briefly the APS button, the radio plays each preset station for a few seconds. When completed, it will remain on the 1st memory.

Manual preset

In RADIO mode:

1) To memorize the current frequency on the current band, press and hold any one of the six preset buttons [1-6].

2) To recall the preset memory on the current band, press one of the preset buttons

[1-6].

FM Stereo

In FM radio mode, press ST button to turn on/off FM stereo mode.

LOC selector

During radio status, press LOC button to select strong or weak station reception. “LOC” appears on the display and only local station is available. When" DX " appears, both distance and local stations can be received.

• This function is only valid in FM.

RDS FUNCTION (Radio Data System)

Program type (PTY)

Press the PTY button shortly to select one of the PTY group. In a PTY group, press the VOLUME+/- button on the remote control or rotate the VOLUME knob on the front panel to select one of the PTY programs. (You can also use the number buttons 1-6 to select one of PTY programs.)

After selecting one of the PTY programs, it will display “SEEK PTY” and automatically search for the station of the PTY program. If the station of the PTY program does not exist, it will display “PTY NONE” and then return back to the current station.

GB - 10

Alternative Frequencies (AF)

When pressing the AF button briefly, the AF switching mode is selected and the state of the AF switching mode is displayed by AF segment in display.

Segment off: AF switching mode off.

Segment on: AF switching mode on, and receive RDS information.

Segment flashing: AF switching mode on, but RDS information is not received yet.

When the AF switching mode is selected, the radio checks the signal strength of alternative frequencies. Every time that a new AF is stronger than the current station, it switches over to that frequency for very short time, and the NEW FREQUENCY is displayed for 1-2 second. (When AF flashes on LCD, it will search for the stronger RDS station. If AF and TP flash on LCD, it can only search for the traffic announcement station).

Traffic Announcement (TA)

Press the TA button shortly to turn on TA search mode.

When traffic announcement is transmitted:

1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.

2).If the unit is in radio mode, it will switch automatically to the traffic announcement.

* TA interruption function: The current traffic announcement is cancelled by pressing

TA button shortly.

* When TA is on, SEEK (SCAN), AUTO MEMORY (APS) function can be received or saved only when traffic program identification code has been received.

DISC PLAYBACK

Region Management Information

Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this unit, this unit cannot play that disc.

The region number of this unit is 2.

BASIC PLAYBACK

1. Press PWR button to turn on the unit.

2. Press OPEN button to open the touch screen.

3. Insert a disc with label facing up.

4. It takes a short while for your unit to load the disc. After loading, the unit will automatically bring you to the main menu of the DVD or start playing the DVD. If the unit does not automatically start playing the DVD, press .

Accelerated play

While the disc is playing, tap or icon on touch screen one or more times to vary the speed and direction of the accelerated play. Press to resume normal playback.

GB - 11

Frame advance (DVD)

1.While the disc is playing press STEP button once.

2.Press STEP a number of times to advance forward image by image.

3.Press to resume normal playback.

Variable slow motion (DVD)

1.While the disc is playing, press SLOW_FWD button.

2.Press the SLOW_FWD button repeatedly to change slow speed.

3.Press to resume normal playback.

Changing chapter/track

While the disc is playing, press or to go immediately to the next or previous chapter (DVD), or to the next or previous track (CD).

Zoom (DVD)

While a disc is playing, press ZOOM until you reach the zoom size you want. The button cycles through 2x, 3x, 4x and then zooms out to 1/2x ,1/3x,1/4x, then returns to normal playback.

ADVANCED FUNCTIONS

On screen display

While the disc is plying, press OSD button repeatedly to display the playback information .

Search a desired section

You can access a specific location by keying in the target time or the track number.

1.Press SEARCH button to enter the search mode.

2.Use ◄ , ► and number buttons to input. Then press OK button to jump to the target location immediately.

Note:Press CLEAR button to cancel the incorrect input.

• PLAY MODES

• Repeat playback

While the disc is playing, press the RPT button repeatedly to select a play mode:

DVD: Repeat Chapter, Repeat Title , Repeat All, Repeat Off;

CD: Repeat 1, Repeat All, Repeat Off.

MP3: Repeat 1, Repeat Directory, Repeat All, Repeat Off

Note:

* Some DVD discs do not allow repeat function.

* Skip function is not available for Repeat Chapter (DVD) , Repeat Track (CD) and

Repeat File (MP3 files).

A-B repeat

To repeat a sequence between two points A and B, press the A-B button at the beginning of the sequence you want to repeat. Then press the A-B button again at the end of the sequence. Then the sequence is played repeatedly until you press A-B to resume normal playback.

Note: Some DVD discs do not allow A-B repeat function.

GB - 12

Program playback (DVD and CD)

With this option, you choose and program the playback order.

1. Insert a disc.

2. In playing or stop mode, press the PROG button. The Program menu appears.

3. Use ◄ , ► , ▲ , ▼ and number buttons to input.

4. Repeat step 3 until programming is completed.

5. Highlight the "PLAY" icon, then press OK button to start the program play.

6. Press the PROG button twice to cancel program playback.

Random playback (DVD, CD, MP3)

During normal playback, press RDM button to start random playback. “RANDOM :

ON” appears on screen for few seconds. To cancel random playback, press RDM button again. “RANDOM : OFF” appears on screen for few seconds.

Intro playback (CD & MP3)

During playback, press INT button to play the first 15 seconds of each track. Press

INT again to cancel this function.

USB OR SD/MMC PLAYBACK

You can connect a USB flash drive (not included) to the USB connector port or a SD/

MMC card (not included) to the memory expansion card slot on the unit to play MP3/

MP4/JPEG files.

• Connect your USB device to the USB port with the supplied USB cable.

• Press REL button to remove the front panel of unit and insert a SD/MMC card to the card slot. Put the front panel back in place.

• Select USB or CARD mode with MODE button.

For operation of playing files on the USB flash drive or SD/MMC card, please refer to the section "PLAYING MP3/MP4/JPEG FILES"

Note:

*There are many USB devices in the market. We cannot guarantee to support all different models. Please try another USB device if your device is not supported.

* Some SD/MMC card may be incompatible.

PLAYING MP3/MP4/JPEG FILES

This unit can play MP3, MP4 and JPEG files recorded on CD-R/CD-RW discs, USB flash drive and SD/MMC card.

1. Insert a disc. Playback starts automatically.

2. To select a file, tap to display content list.

GB - 13

BLUETOOTH FUNCTION

When the unit is ON, press MODE button repeatedly to select BLUETOOTH mode.

3. For some mobile phones, they can automatically connect with the Bluetooth device of the car radio system after pairing is ok. While for some mobile phones, you need to select the paired Bluetooth device and confirm it.

Note: When pairing is failed, press PAIR button to start pairing again.

4.Use your mobile phone to do connection or disconnection.

Notes:

-This system will not operate or may operate improperly with some Bluetooth mobile phones / audio players.

- There are many mobile phones in the market. We cannot guarantee the compatibility of all mobile phones together with the unit.

-If you found the conversation is not clear, try to move closer to the microphone.

-Audio playback will be set to the same volume level as set during telephone call.

This might cause problems if extreme volume level is set during telephone call.

GENERAL SETTINGS

1.Tap icon on touch screen to display the main menu as shown below.

Tap to go to previous page, tap to go to next page. Tap your desired folder and file, and then playback starts automatically.

3.To stop playback,

MP3 files: press ■ button once to pre-stop, press again to stop playback.

MP4 files & Jpeg files: press ■ button once to stop playback and display the content list.

If the disc contains MP3/ MP4/JPEG files, after the disc is loaded, MP3 playback starts automatically. If you want to play MP4 or JPEG files, tap repeatedly until below icons appear.

Tap this icon to select music files.

Tap this icon to select MP4 files.

Tap this icon to select Jpeg files.

During Jpeg playback:

1.Use ◄, ► , ▲ , ▼ to change the display angle.

► : Rotate 90 degree clockwise

◄: Rotate 90 degree counter-clockwise

▲ : Up-down

▼ : Left-Right

2.Use PROG button to change the slide-show effect.

3.Use ZOOM button to change the zoom size.

GB - 14

: To dial, tap the phone number and then .

: To check received , dialed or missed calls.

: Tap this icon to switch to voice dialing mode.

: Tap this icon to start pairing.

: When pairing is successful, you can control music player of your phone by

taping , , icons on the touch screen.

Pair devices

1. Turn on the Bluetooth function of your mobile phone.

2.Select the item of searching the Bluetooth device and enter it. Your mobile phone starts to search for Bluetooth devices within range (10 meters). Select this car radio

“M-725DR” and confirm it, then you are asked to input a 4-digit password that is 0000.

Enter the password and confirm it.( If you have made Bluetooth connectivity before, a list of the previous search results is displayed. Select “M-725DR” and confirm.) “LINK

OK” appears if pairing is successful.

GB - 15

2. Tap Setup icon to display general setup interface.

3. Select GENERAL , TIME , AUDIO ,VIDEO , RADIO or CALIBRATE

by tapping the icon. Select the option and adjust the setting by tapping icons on the right side accordingly.

GB - 16 GB - 17

Touch screen calibration

If necessary, when the sensitive area is offset from icon position, you may need to recalibrate the touch screen.

Tap icon to access the calibration interface, calibrate your screen by accurately taping the white cross appearing in the screen corners.

KEYBOARD INTERFACE

During playback, tapping anywhere on the screen or press OSD button on remote control to display the keyboard.

GB - 18

1. :To start or pause playback

2. ■ :To stop playback

3. :Fast backward

4. :Fast forward

5. :To directly access the previous chapter (DVD) or track (CD).

6. :To directly access the next chapter (DVD) or track (CD).

7. :To adjust volume.

8. :To go to next page of keyboard interface.

9. :To start or cancel intro playback

10. :To select audio language

11. :To access disc menu

12. :To access title menu

13. :To repeat playback.

14. :To select subtitle language

15. :Tap it to display the number buttons on screen, then tap the number to select

your chapter (DVD) or track (CD) . Then it will jump to the target location immediately.

16. : During DVD/ jpeg playback, tap to access zoom mode, then tap

to move to left, right, up or down. (On remote control, press ZOOM button,

then press ◄, ►, ▲ , ▼.)

17. :To access zoom function.

18. : To start/ cancel random playback.

19. : To access the camera angle function for DVD disc.

DVD SETUP MENU

Navigating the setup menu

1.Press

SETUP to display the setup main menu.

2.Press ◄ or ► to select a menu icon.

3.Press ▲ or ▼ to select one of the available options under a menu icon.

4.Press ► to access the submenu and ▲ , ▼ to select an option.

5.Press OK to confirm your selection.

6.Press ◄ to return to a previous menu.

7.Press SETUP to exit from the setup menu.

GB - 19

SYSTEM SETUP

SYSTEM SETUP

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

TV TYPE

4:3 PS (Panscan)

• When wide-screen video is played, this mode clips the right and left sides of the image so that it can be viewed on a conventional screen.

• Some wide-screen DVDs that do not permit Pan Scan mode playback are automatically played in letterbox mode (black bands top and bottom).

4:3 LB

• When wide-screen video is played in this mode on a conventional screen, black bands appear at the top and bottom of the screen.

16:9 (Wide screen)

• This is the correct mode for playing wide-screen videos on a wide-screen TV.

Notes :

•The visible picture size is preset on the DVD disc. Therefore the playback picture of some DVD discs may not conform to the picture size you select.

•When you play DVD discs recorded in the 4:3 aspect ratio, the playback picture will always appears in the 4:3 aspect ratio regardless of the TV shape setting in the function setup menu.

PASSWORD

This item is for locking or unlocking the rating level of the Parental Control. The defaulted state is locked. If the password has not been set yet after you purchase this unit, it is "0000".

To set a new password, use ▲ or ▼ button to select “PASSWORD”, then press► button to highlight “ ”. Input the initial password 0000, and then press OK to unlock it ( is displayed). Press ► button to highlight “ ” , then input a

4-digit new password and press OK to confirm.

GB - 20

RATING

Some DVD discs are equipped with a password function and are rated according to their content. The contents allowed by parental lock level and the way a DVD disc is controlled may vary from disc to disc. For example, if the disc allows, you could lockout violent scenes unsuitable for children or you could lock out playback of the disc altogether.

You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function.

The parental lock levels are equivalent to the following ratings.

1 Kid Safe

2 G

3 PG

4 PG-13

5 PG-R

6 R

7 NC17

8 Adult

Set the rating level of parental control

1.To unlock the Parental settings, press ▲ or ▼ button to select “PASSWORD”, and press ► to highlight “ ”. Input your 4-digit password, and then press OK to unlock it ( is displayed).

2.Press ▲ or ▼ button to select “RATING”, then press ► button to enter submenu.

Press ▲ or ▼ button to select your desired rating level. Press OK to confirm.

3.To lock the Parental settings , press ▲ or ▼ button to select “PASSWORD”, and press ► to highlight “ ”. Input your 4-digit password, and then press OK to look it ( is displayed).

Note: Rating limits take affect only when the unit is locked.

DEFAULT

Pressing OK with this function selected resets all settings to their initial factory state, except for parental level and password.

LANGUAGE SETUP

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

EXIT SETUP

GB - 21

OSD LANGUAGE

•To select the language of unit’s menus.

Note:The OSD language can only be changed in SETUP MENU with a DVD inserted.

AUDIO LANGUAGE

•To select the dialog language.

•If the selected language is not available on the disc, the disc’s language will be used instead.

•To change the dialog language during playback, press AUDIO on the remote control.

SUBTITLE LANG

•To select the language of the DVD subtitles. Select “OFF” to turn off the subtitles.

•If the selected language is not available on the disc, the disc’s language will be used instead.

•To change the subtitle language during playback, press SUBTITLE on the remote control.

MENU LANG (menu language)

•To select the language of the DVD menus.

•If the selected language is not available on the disc, the disc’s language will be used instead.

AUDIO SETUP

AUDIO SETUP

KEY

VIDEO SETUP

VIDEO SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

EXIT SETUP

BRIGHTNESS: To adjust the video brightness level on a scale of 0 to 12.

CONTRAST: To adjust the video contrast level on a scale of 0 to 12.

HUE: To adjust the color hue level on a scale of –6 to +6.

SATURATION: To adjust the color saturation level on a scale of 0 to 12.

SHARPNESS: To adjust the sharpness of video output.

SPEAKER SETUP

SPEAKER SETUP

DOWNMIX

EXIT SETUP

KEY

It is for selecting your desired basic music tone (from low to high).

GB - 22

EXIT SETUP

DOWNMIX

For selecting your desired sound effect when there is no center speaker and subwoofer. There are 3 modes: LT/RT, STEREO, VSS.

LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, so it will output audio signal with vivid theatre effect.

STEREO: with 5.1 audio signal, it will output the left and right channels signal; with 2 channels, it will output the common 2 channels signal of stereo signal.

VSS: when playing a disc with 5.1 channels, the main channel speakers can output audio signal with VSS effect.

GB - 23

DIGITAL SETUP

DIGITAL SETUP

DYNAMIC RANGE

DUAL MONO

EXIT SETUP

DYNAMIC RANGE

Select a value between “FULL” (maximum compression) and “OFF”(maximum dynamic).

DUAL MONO

It is for selecting a desired audio output mode for the left and right channels. There are 4 modes as follows: STEREO, MONO L, MONO R, MIX MONO.

SAFETY INSTRUCTION

ATTENTION: To reduce the risk of electric shock, do not remove the cover or back. There are no user serviceable parts inside the unit. Refer all servicing to qualified personnel.

The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of "dangerous voltage" inside the unit.

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam. Class 1 laser product.

If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.(Waste Electrical and Electronic Equipment

Directive)

GB - 24

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

GB - 25

READ

GB - 26

SPECIFICATION

General

Power Requirement 14.4V DC (11-16V allowable)

Load Impedance 4Ω

Max. Power Output 40Wx4

Tone Controls ±7dB

Bass 100Hz

Treble 10 kHz

Dimensions Approx.178x176x50mm (d/w/h)

Mounting Dimension Approx.187x176x58mm (d/w/h)

Weight Approx.2.2kg

FM Tuner Section

Tuning Range 87.5-108(MHz)

IF Range 10.7MHz

Usable Sensitivity (-30dB) 12dBuV

Signal-to-noise Ratio 50dB

Stereo Separation 30dB (1 kHz)

Frequency Response 40-12000Hz

MW Tuner Section

Frequency Range 522-1620(kHz)

IF Range 450 kHz

Usable Sensitivity (-20dB) 35dBuV

DVD Player Section

DVD Video Signal System NTSC

Number of channel 2 channels

Frequency Response 40Hz to 16,000Hz

Dynamic Range 60dB

Signal-to-Noise Ratio 50dB

Note: Design and specification are subject to change without notice.

GB - 27