Instruction Sheet

HGOUTLETCVR

Installation/Removal

This cover is intended for use with HG power strips to prevent the connection of unauthorized devices.

1 Insert the cover into the outlet you wish to block.

2 Using finger pressure, push the nylon screw into the hole in the ground opening. This will lock the cover into place.

1

2

3 To remove the cover, use a Phillips screwdriver to remove the nylon screw and then pull the cover out of the outlet.

Save the cover and screw as it is designed for repeated use.

3

Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2012 Tripp Lite. All rights reserved.

12-406 • 93-323F

12-406-93-323F.indd 1 9/18/2012 11:27:13 AM