Register your product and get support at
www.philips.com/support
PPX2330
PPX2340
EN User Manual
BC
Table of Contents
Overview ................................................... 3
Dear Customer ................................................................... 3
About this User Manual ..................................................... 3
1 General Safety Information ................ 4
Setting Up the Device ........................................................ 4
Repairs ................................................................................... 4
Power Supply ....................................................................... 4
2 Overview............................................... 6
Top of the Device ............................................................... 6
Side View ............................................................................... 6
Bottom of the Device ........................................................ 6
Overview of the Menu Functions .................................... 7
3 Initial Operation .................................. 8
Setting up the Device ......................................................... 8
Connect Power Supply / Charge Battery ...................... 8
Initial Installation .................................................................. 8
4 Memory Card / USB Storage Device. 9
Inserting a Memory Card .................................................. 9
Connecting USB Storage Device ..................................... 9
Connect to a Computer (USB) .................................... 10
5 Connect to the Playback Device ...... 11
Connecting to a Computer ........................................... 11
Connecting using Audio/Video (CVBS) Adaptor Cable
................................................................................................11
Connecting the Headphones ......................................... 12
6 Media Playback................................... 13
Video Playback ..................................................................
Photo Playback .................................................................
Music Playback ..................................................................
Managing Files ...................................................................
13
14
15
15
7 Settings ............................................... 18
8 Service................................................. 20
Care Instructions for the Battery ................................
Battery Deep Discharge .................................................
Cleaning ..............................................................................
Device Overheated .........................................................
Troubleshooting ...............................................................
20
20
21
21
22
9 Appendix............................................. 23
Technical Data .................................................................. 23
2
Philips · PPX2330 · 2340
Overview
Dear Customer
Thank you for purchasing our Pocket Projector.
We hope you enjoy your device and its many functions!
About this User Manual
With the installation guide on the following pages, you
can start using your device quickly and easily. Detailed
descriptions can be found in the following sections of
this user manual.
Read the entire user manual carefully. Follow all safety
instructions in order to ensure proper operation of
your device. The manufacturer accepts no liability if
these instructions are not followed.
Symbols Used
Note
Troubleshooting
This symbol designates tips that will help you
to use your device more effectively and easily.
CAUTION!
Damage to the Device or Loss of Data!
This symbol gives warning of damage to the
device and possible loss of data. These damages can result from improper handling.
DANGER!
Danger to Persons!
This symbol gives warning of danger to persons. Physical injury or damage can result
from improper handling.
3
1 General Safety Information
Do not make any changes or settings that are not
described in this user manual. Physical injury or damage
to the device or loss of data can result from improper
handling. Take note of all warning and safety notes indicated.
Setting Up the Device
The device is exclusively for indoor use. The device
should be placed securely on a stable, flat surface. Position all cables in such a way that no one will trip on
them, thus avoiding possible injuries to persons or damage to the device itself.
Do not plug in the device in humid rooms. Never touch
the electrical cable or the electrical connection with
wet hands.
The device must have sufficient ventilation and should
not be covered. Do not put your device in closed cabinets or boxes.
Do not place the device on soft surfaces such as tablecloths or carpets and do not cover the ventilation slits.
Otherwise the device could overheat or catch fire.
Protect the device against direct sunlight, heat, large
temperature fluctuations and moisture. Do not place
the device in the vicinity of heaters or air conditioners.
Observe the information on temperature and humidity
in the technical data.
When the device is running for a long period of time,
the surface becomes hot and a warning symbol appears
on the projection. The device switches automatically to
ECO mode when it gets too hot (see also chapter
Power Save, page 18).
Do not allow liquids to enter into the device. Switch off
the device and disconnect it from the power supply if
liquids or foreign substances end up inside the device.
Have the product inspected by an authorized service
center.
Always handle the product with care. Avoid touching
the lens. Never place heavy or sharp objects on the projector or the power cable.
If the projector gets too hot or emits smoke, shut it
down immediately and unplug the power cable. Have
your device examined by trained professionals at an
authorized service center. To prevent the spread of fire,
open flames should be kept away from the device.
4
Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions:
· if the device is moved from a cold to a warm area;
· after a cold room is heated;
· when this device is placed in a damp room.
Proceed as follows to avoid any moisture build-up:
1 Seal this device in a plastic bag before moving it to
another room, in order for it to adapt to room conditions.
2 Wait one to two hours before you take the device
out of the plastic bag.
The device should not be used in a very dusty environment. Dust particles and other foreign objects may
damage the product.
Do not expose the device to extreme vibrations. It may
damage the internal components.
Do not allow children to handle the device without
supervision. The packing materials should be kept out of
the hands of children.
Repairs
Do not make any repairs to the device yourself.
Improper maintenance can result in injuries or damage
to the device. Have your device repaired only by an
authorised service centre.
Do not remove the type label from your device; this
would void the warranty.
Power Supply
Use only the enclosed power adapter (see chapter Appendix / Technical Data). Check whether the electrical voltage
of the power supply matches the electrical voltage available
at the setup location. This equipment complies with the
voltage type specified on the product.
The product should be supplied by a power system compliant with LPS requirements of 2.5 of UL60950-1.
The capacity of the battery diminishes with time. If the
device functions only with the power supply, the battery
is defective.
Do not try to replace the battery yourself. Incorrect
handling of the battery or using the wrong type of battery can cause damage to the device or cause injury.
Batteries (battery pack or batteries installed) must not
be exposed to flame or excessive heat including from
direct sunshine or the like.
Attention should be drawn to the environment aspects
of battery disposal.
Philips · PPX2330 · 2340
DANGER!
Risk of explosion with incorrect type of
batteries
Only replace the batteries with the same or
comparable batteries.
There is a risk of explosion if the incorrect battery type is used.
Switch the device on or off using the power switch
before removing the power supply from the wall.
Turn off the device and remove it from the power supply before cleaning the surface. Use a soft, lint-free
cloth. Never use liquid, gaseous or easily flammable
cleansers (sprays, abrasives, polishes, alcohol). Do not
allow any moisture to reach the interior of the device.
DANGER!
Danger of Damage to the Eye by High
Power LED
This device is equipped with an high power
LED (Light Emitting Diode), which emits very
bright light. Do not stare directly into the projector lens to avoid eyes injury or irritations.
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time at
high volume—especially when using headphones. This could lead to the risks of hearing
damage.
General Safety Information
5
2 Overview
Top of the Device
Side View
1—USB cable
USB connection for a computer / port for power
supply
USB connection for a USB storage device
2—Focus wheel for image sharpness.
1—Loudspeaker
2—Battery status monitor
Charge indicator with connected power supply:
Red: Charging battery
Green: battery is fully charged
3 MICRO SD—Memory card slot (Micro SD/Micro
SDHC)
4 Ï—Audio output / video input (PPX2340)
Headphone connection or connection for external
speakers
5 ON/OFF—On/Off switch
Note
Note that the distance to the projection surface must be a minimum of 1 foot and a maximum of 6.9 feet. If the Pocket Projector is
located outside of this range, it will not be
possible to focus the image. Turn the focus
wheel carefully so as to avoid damaging the
lens.
3—OK key
à—Confirm entry / start, stop video/music playback or slideshow.
4—Navigation keys
¡/¢—Navigating / during music playback select
previous, next title when image display is switched
off / during video/picture playback wake Quick setting bar
À/Á—Navigating / during music playback: adjust
volume level / during video playback start forward or
backward / during picture playback select previous,
next picture
5—¿ key
¿—One menu step back, one directory level back
/ cancelling a function
a
b
e
d
c
Bottom of the Device
‚ Tripod connection
a
a
b
c
d
e
6
Philips · PPX2330 · 2340
Overview of the Menu
Functions
1 After switching on the device the main menu
appears.
2 Select the desired menu using the navigation keys
¡/¢, À/Á.
3 Confirm with à.
4 By pressing the ¿ key several times you will return
to the main menu.
Videos—Selecting files for video playback
Source—Switch to the external video input AV .
Pictures—Selecting files for the slideshow
Folder View—Selecting files for Playback. Copy or
Delete Files (Mark the files with Á and confirm
using à).
Music—Selecting music files for playback
Settings—Configure settings for playback and for
the device
Symbols in Sub Menu
You can change the storage location using the ¡/¢
keys. The chosen storage appears highlighted in white.
§—USB storage device
¨—Memory card
©—Internal memory
ª—Charge level of the internal battery. The icon will
be red, when the battery needs to be recharged.
Overview
7
3 Initial Operation
Setting up the Device
Initial Installation
A tripod accessory is available if you want to elevate the
device.
1 Switch the device on using the on/off switch on the
side.
2 Turn the device towards a suitable projection surface or wall. Note that the distance to the projection
surface must be a minimum of 1 foot and a maximum
of 6.9 feet. Make sure the projector is in a secure
position.
3 Use the focus wheel on the top to adjust the image
sharpness.
4 Select the desired menu language using ¡/¢.
5 Confirm with à.
Connect Power Supply /
Charge Battery
CAUTION!
Electrical Voltage at the Site of Installation!
Check whether the electrical voltage of the
power supply matches the electrical voltage
available at the setup location.
Connect the USB plug to a computer, to charge the battery. Alternatively you may connect the USB plug to the
power adapter (not included) (see also chapter Compatible Power Supply, page 23).
8
Note
The Main Menu Appears Instead of
the Language Selection
The device has already been installed. In
order to change the menu language, proceed as follows:
1 Use the navigation keys to select Settings.
2 Confirm with à.
3 Select with ¡/¢ Language.
4 Confirm with à.
5 Select the desired language with ¡/¢.
6 Confirm with à.
7 Exit with ¿.
Philips · PPX2330 · 2340
4 Memory Card / USB Storage Device
Inserting a Memory Card
1 Remove the cover to the memory card slot MICRO
SD.
2 Insert a memory card with the contacts facing
upwards into the MICRO SD slot at the side of the
device. Your device supports the following memory
cards: micro SD/SDHC.
3 Insert the memory card into the slot until it snaps
into position.
Connecting USB Storage
Device
1 Connect the USB storage device to the USB slot on
the cable
DANGER!
Prematurely Remove a Memory
Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
4
5
6
7
Press lightly on the memory card to remove it.
The memory card is ejected.
Remove the memory card.
Close the cover of the memory card slot in order to
protect the slot from dust.
Memory Card / USB Storage Device
9
Connect to a Computer
(USB)
You can use the USB cable to connect the Pocket Project to a computer. In this way, you are able to copy files
back and forth between the internal memory, an
inserted memory card and the computer. You can also
delete the files. You can playback the files saved on the
Pocket Projector on your computer.
1 Connect the USB plug of the Pocket Projector with
a free USB connection of your computer.
2 Switch the device on using the on/off switch on the
side.
3 A confirmation appears when the devices are connected successfully.
Note
Successful Connection
You cannot use the projection function of
the Pocket Projector when it is connected
to a computer via USB.
4 If a memory card has been inserted, it will be displayed as another disk drive.
5 You can move, copy or delete data from the computer, the memory card (if inserted) and the internal
memory.
10
Philips · PPX2330 · 2340
5 Connect to the Playback Device
Only use the supplied cable or cables that are available
as accessories to connect the projector.
Supplied Cables
Video-(CVBS) cable (PPX2340)
Connecting to a Computer
(PPX2340)
Installing the Software
1 Close all open programs and applications before
beginning the installation process.
2 Connect the device with a USB connection of your
computer.
3 Select PicoPix 2340 as drive in the Windows
Explorer and start the program Picopix Fun Viewer
Setup_Windows.exe or Picopix Fun Viewer
Setup_MAC.hqx according to the OS being used.
4 Your computer will now prepare for the installation
process. Follow the instructions of the installation
wizard and restart the computer.
Note
Disconnect the Device from the
Computer
Disconnect the device from the computer
before restarting. This could cause the
computer to boot from the Pocket Projector being recognised as a USB storage
device.
5 The software has been installed and you will find the
icon PicoPix Fun Viewer on the desktop.
Connecting using Audio/
Video (CVBS) Adaptor
Cable
(PPX2340)
Use the projector's audio/video cable (A/V cable) to
connect camcorders, DVD players or digital cameras.
The jacks for these devices are yellow (video), red
(audio right) and white (audio left).
1 Connect the supplied A/V cable to the Ï input of
the projector.
2 Connect the video device's audio/video jacks to the
A/V cable using a conventional composite video
(RCA) cable.
3 Select Menu > Source and switch to AV.
Connecting to Mobile Multimedia Devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufacturer of the multimedia device. Please note that only the
original cables from the device manufacturer may function.
Start Projection
1 Connect the USB plug of the Pocket Projector with
a free USB connection of your computer.
2 Start the software PicoPix Fun Viewer by double
clicking on the icon on the desktop.
3 Follow the instructions of the Software to start with
the projection.
Note
Switching to the Multimedia Device Signal Output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
Connect to the Playback Device
11
Connecting the Headphones
(PPX2340)
1 Before connecting the headphones, turn down the
volume on the device.
2 Connect the headphones to the projector's headphone slot. The device speakers deactivate automatically when the headphones are connected.
3 After connecting the headphones, increase the volume to a comfortable level.
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time at
high volume—especially when using headphones. This could lead to the risks of hearing
damage. Before connecting the headphones,
turn down the volume on the device. After
connecting the headphones, increase the volume to a comfortable level.
12
Philips · PPX2330 · 2340
6 Media Playback
Video Playback
Video Playback (USB/SD Card/
Internal Memory)
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
9 Press ¿ to end playback and return to the overview.
10 When you press ¿ again, you will return to the
main menu.
Note
Navigation During Playback
Rewind/fast forward: Press À/Á long.
Press à to stop or continue playback.
File Format
3 Use the navigation keys to select Videos.
4 Confirm with à.
5 With an inserted memory card or USB storage device: Select the internal memory, the USB
storage device or the memory card using the keys
¡/¢.
6 Confirm with à.
7 Use ¡/¢ to select the video file that you wish to
play.
There are various video file formats as *.mov, *.avi,
*.m4v. Many of these formats function as a container
that contains the various encoded audio and video files.
MPEG-4, H.264, MP3, and AAC are all examples of
encoded audio/video files. In order to play these files,
the projector must read them and decode the audio/
video signals.
Please note that some files cannot be played as a result
of different video and audio encoders.
Supported File Formats
Container
Video Format
*.avi, *.mov, *.mp4
MJPEG, MPEG-4, H.264
*.mkv
MPEG-4, H.264
*.ts
MPEG-2, H.264
*.rm, *.rmvb
Real video
*.dat
MPEG-1
*.vob
MPEG-2
*.mpg, *.mpeg
MPEG-1, MPEG-2
Video Playback (A/V Connection)
Note
Displaying Video Files
Only those videos that are compatible
with the Pocket Projector will be displayed.
8 Press à to start playback.
Media Playback
(PPX2340)
1 Connect the audio/video output of the external
device to the Pocket Projector's Ï conection. Use
the corresponding cable and cable adapter for this
purpose (see also chapter Connecting using Audio/
Video (CVBS) Adaptor Cable, page 11).
2 To find out how this should be activated, please see
the relevant instruction manual. Most often, this
option is labeled "TV out" or "TV Output" in the corresponding menu.
3 Start the video playback on the external device.
13
Modify Settings During Playback
1 Press the ¡ or ¢ key.
2 Use the ¡/¢ keys to choose from the following
settings:
Brightness: Adjust brightness
Contrast: Adjust contrast
Saturation: Adjust colour saturation
Smart Settings: Select predefined settings for
brightness / contrast / colour saturation
Volume: Adjust volume level
3 Modify the setting using À/Á.
The device saves the modified settings automatically.
Modify Other Settings
1 Press the à button.
2 Use the ¡/¢ keys to choose from the following
settings:
Image Settings: Adjust brightness, contrast, colour
saturation
Sound Settings: Adjust volume or key beep
Power Save: This function reduces the light output
in order to increase the operating time for the builtin battery.
3 Confirm with à.
4 Modify the setting using à and ¡/¢.
5 Confirm with à.
Photo Playback
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
7 Miniature photos are displayed on the screen as an
overview.
Note
Miniature View or List
In the settings, you are able to select
whether the overview will be displayed as
miniatures or in a list.
Note
Many Photos on the Memory Card or
the USB Device
If there are a lot of photos on the memory
card or the USB storage device it can take
a moment before the overview appears.
8 Use À/Á or ¡/¢ to select the image that you
want to start the slide show with.
9 Press à to start the slide show.
10 Press ¿ to end the slide show and return to the
overview.
11 When you press ¿ again, you will return to the
main menu.
Pause Slideshow
1 Press à to stop the slide show and open the menu.
If you don't press a button within four seconds the
slide show will continue.
2 Select with À/Á r and confirm with à to stop
or continue the slideshow.
Slide Show with Background Music
3 Use the navigation keys to select Pictures.
4 Confirm with à.
5 With an inserted memory card or USB storage device: Select the internal memory, the USB
storage device or the memory card using the keys
¡/¢.
6 Confirm with à.
14
1 Press à to stop the slide show and open the menu.
2 Select with À/Á Ó and confirm with à to start
background music.
3 Press À/Á to adjust the volume level.
Rotate the Image
1 Press à to stop the slide show and open the menu.
2 Select with À/Á Ÿ and confirm with à to
rotate the current image.
Philips · PPX2330 · 2340
Zoom in / Zoom out
1 Press à to stop the slide show and open the menu.
2 Select with À/Á Ò and confirm with à to
enlarge the current image.
3 Use the À/Á/¡/¢ keys to move around the
magnified image.
4 Press ¿ to continue the slide show.
Music Playback
Note
Switch off the Image Playback
You can turn off image playback while playing
music in order to save power (see also chapter Music Settings, page 18). As soon as you
press the ¿ key, the image reappears and the
fan starts again.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Music.
4 Confirm with à.
5 With an inserted memory card or USB storage device: Select the internal memory, the USB
storage device or the memory card using the keys
¡/¢.
6 Confirm with à.
7 Use ¡/¢ to select the file that you wish to play.
9 Press à to stop or continue playback.
Note
Navigating when Image Playback is
switched off
Press ¡/¢ to skip to the previous or
next song.
Press à to stop or continue playback.
Press ¿ to return to the selection.
10 Press ¿ to end playback and return to the overview.
11 When you press ¿ again, you will return to the
main menu.
You can adjust the volume during playback using À/
Á. Press repeatedly À to switch off the volume
(mute function).
Managing Files
Copy Files
You can copy files back and forth from the internal
memory to the connected USB storage device or memory card.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Folder View.
4 Confirm with à.
5 With an inserted memory card or USB storage device: Select the internal memory, the USB
storage device or the memory card using the keys
¡/¢.
6 Confirm with à.
7 Use ¡/¢ to select the file that you want to copy.
Note
No Files Found (0 files)
Only those files that are compatible with
the Projector will be displayed.
8 Press à to start playback.
Media Playback
15
8 Mark the file using Á. Pressing ¿ deselects the
chose file(s). Press Á long to select all files in current folder.
Note
Mark the Entire Folder
You can also mark an entire folder to copy
all files from the folder. Note that the copy
process of large folders can takes some
time.
Delete Files
You can delete files from the internal memory, the connected USB storage device or the memory card.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
9 Use ¡/¢ to select other files.
10 Press à.
11 Select with ¡/¢ Copy.
12 Confirm with à.
13 Use ¡/¢ to select the destination memory: SD
card, internal memory or USB storage device.
14 Confirm with à.
Note
Files Already Exist
If the files you are copying already exist in
the target folder, you must choose
whether or not you want to overwrite
them using ¡/¢ and à. If you choose
not to overwrite these files, copies will be
created. The copies can be recognised by a
number added to the file names.
15 The files are copied.
3 Use the navigation keys to select Folder View.
4 Confirm with à.
5 With an inserted memory card or USB storage device: Select the internal memory, the USB
storage device or the memory card using the keys
¡/¢.
6 Confirm with à.
7 Use ¡/¢ to select the file that you want to delete.
Note
No Files Found (0 Files)
Only those files that are compatible with
the Projector will be displayed.
8 Mark the file using Á. Pressing ¿ deselects the
chose file(s). Press Á long to select all files in current folder.
9 Use ¡/¢ to select other files.
10 Press à.
11 Select with ¡/¢ Delete.
12 Confirm with à.
Note
Error
If errors occur during the copying process,
make sure that enough free space is available on the device.
Note
Removing Storage Device
Only remove the storage device after the
copy process is complete.
16
Philips · PPX2330 · 2340
13 Use ¡/¢ if you want to delete the files or cancel
the deletion process.
14 Confirm with à.
Note
Error
If errors occur during the deletion process, make sure that the storage device is
not write-protected.
Note
Deleting Photos on the Memory Card
When deleting photos via the computer, note
that the photos may not be correctly displayed when the memory card is inserted into
the digital camera again. Digital cameras
sometimes store additional information in
specific folders, including previews and orientation information.
For this reason, only delete the photos using
the digital camera.
Media Playback
17
7 Settings
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
Brightness—Adjust brightness
Contrast—Adjust contrast
Saturation—Adjust colour saturation
Sound Settings:
Volume—Adjust the volume
Key beep—Turn key tones on and off
3 Use the navigation keys to select Settings.
4 Confirm with à.
5 Use ¡/¢ to select from the following settings.
6 Confirm with à.
7 Modify the settings using à, ¡/¢,
8 Confirm with à.
The ¿ key takes you one step back in the menu.
Image Settings
Wall paper—Select background images
Fit Screen—Convert videos and images original, optimal, zoom mode.
Projection Mode
Front—Normal projection; the device is located in
front of the projection surface/screen.
Rear—Rear projection; the device is located behind
the projection surface; the image is horizontal mirrored.
Ceiling—The device is hanging from the ceiling in an
upside-down position; the image is rotated by 180
degrees.
Rear ceiling—The device is hanging from the ceiling
in an upside-down position behind the projection
surface; the image is rotated by 180 degrees and horizontal mirrored.
Wall color correction—Colour correction of the projected image to adjust to coloured projection surfaces
Smart Settings—Select predefined settings for brightness / contrast / colour saturation. If you modify these
settings, the setting is switched to Manual.
18
Video Settings
View—Display all videos in a list or a corresponding
folder structure on the drive.
Repeat—Set the repeat type for video files: Repeat
deactivated (Off), repeat all videos in a directory
(Directory), repeat only the current video (Movie),
repeat all videos (All).
Resume play—If this function is activated, playback will
continue at the position it was last stopped. If deactivated, playback will always start at the beginning of the
video.
Music Settings
View—Show all songs in a list or a corresponding folder
structure on the drive.
Screen—Activate or deactivate the projection during
playback.
Repeat—Set the repeat type for music files: Repeat
deactivated (Off), repeat all songs in a directory
(Directory), repeat only the current song (Song),
repeat all songs (All).
Shuffle—Activate this function for random playback.
Otherwise, playback will take place in sequence.
Picture Settings
View—Display the images as a thumbnail or as a list
during selection in the main menu.
Time per slide—Image viewing time during slide show
Repeat—Set the type of repeat for slide show photos:
Repeat off (Off), repeat all photos in the directory
(Directory), repeat all stored photos (All).
Slide transition—Set image transitions
Slideshow order—Play slide show in order or randomly
Power Save
Eco mode—This function reduces the light output in
order to increase the operating time for the built-in battery. When operating from the power supply, the
energy saving mode is always deactivated in order to
ensure the best-possible image display.
Sleep mode—With this function, the projector automatically shuts down after a specified period of time or
at the end of a movie.
Philips · PPX2330 · 2340
Language
Select the desired language for the menu.
Maintenance
Reset settings—Reset settings to factory defaults.
Firmware Update—Update Firmware
Note
Keep the device connected to a power outlet
for the duration of the firmware update.
Information—Display free space in the internal memory and information on the device (Capacity: / Free
space: / Firmware Version / Device name: / Model)
Settings
19
8 Service
Care Instructions for the
Battery
The capacity of the battery diminishes with time. You
can prolong the life of the battery if you observe the following points:
• Without a power supply, the device operates from
the built-in battery. When the battery does not
have sufficient capacity, the device switches to
stand-by mode. Connect the device to the power
supply.
• When the battery does not have sufficient capacity, the battery symbol in the display turns red.
• When the device is running for a long period of
time, the surface becomes hot and a warning symbol appears on the projection. The device
switches automatically to ECO mode when it gets
too hot (see also chapter Power Save, page 18).
• Use the device at least once a week.
• Charge the battery regularly. Don’t store the
device with a completely discharged battery.
• If the device is not used for several weeks, discharge the battery a little by using the device
before storing it.
• If the device only works using the USB connection
or with the power supply, the battery is defective.
• Keep the device and the battery away from
sources of heat.
DANGER!
Do Not Replace the Battery Yourself
Do not try to replace the battery yourself.
Incorrect handling of the battery or using the
wrong type of battery can cause damage to
the device or cause injury.
20
Battery Deep Discharge
When the battery is in deep discharge or the device is
not used for a longer period, proceed as followed:
1 Connect the USB plug to a computer, to charge the
battery. Alternatively you may connect the USB plug
to the power adapter (not included) (see also chapter Compatible Power Supply, page 23). The device
behaves as follows:
Device off
Device on
Connect
to a computer
Device turns on
and off again.
Slow charging
Device turns on
and off again.
Slow charging
Connect
to the
power
adapter
Device turns on
and off again.
Fast charging
Device remains
turned on.
Slow charging
2 The device can be turned on and is ready to use after
approximately five minutes of charging time.
Battery Recharge Time with Device off
Turning on
possible
Completely
charged
Slow charging
5 minutes
10 hours
Fast charging
5 minutes
3 hours
Philips · PPX2330 · 2340
Cleaning
Device Overheated
DANGER!
Switching Off the Device!
Switch the device on or off using the power
switch before removing the power supply
from the socket.
A overheat symbol appears if the device is overheated.
• At maximum level of brightness the symbol
appears in the status bar and the device turns
automatically to minimum level of brightness.
• At minimal level of brightness the symbol shows
for three seconds in the middle of the screen.
Then the device turns off automatically.
DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily flammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning fluids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
DANGER!
Do Not Use Any Liquid Cleaning
Agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coating film on the lens.
Service
21
1 Switch the device off using the on/off switch on the
side.
2 Wait at least ten seconds.
3 Switch the device on using the on/off switch on the
side.
4 If the problem repeats, please contact our technical
customer service or your retailer.
Troubleshooting
Power Cycling
If a problem occurs that cannot be corrected with the
instructions in this user manual (see also the help
below), follow the steps given here.
Problems
Solutions
The Pocket Projector cannot be switched on
•
Connect your computer or a compatible power supply to recharge the internal battery. Make sure the
Pocket Projector is switched off.
No sound from the external connected device
•
•
•
Check the cables to the external device
Set the volume on the external device
Only the original cables from the device manufacturer may function
Only the initial screen appears and not the image from
the external device
•
Check if the cables are connected to the right connectors.
Please check that the external device is switched on
Check if the video output of the external device is
switched on.
•
•
Only the initial screen appears and not the image from
the connected computer
•
Check if the software at your computer has been
started.
Device switches to stand-by mode
•
When the device is running for a long period of time,
the surface becomes hot and a warning symbol
appears on the projection. The device switches automatically to ECO mode when it gets too hot (see
also chapter Power Save, page 18).
When the battery does not have sufficient capacity,
the device switches to stand-by mode. Connect the
device to the power supply.
•
Devices changes from maximum level of brightness to •
minimum level of brightness when the device is connected over USB to play videos.
•
Device can not connect with an Android device (for ex- •
ample mobilephone/smartphone with Android operating
system) when connected via USB.
22
When the environment temperature is too high, the
devices turns automatically from maximum level of
brightness to minimum level of brightness in order to
protect the high power LED.
Use the device with lower environment temperatures.
Deactivate the function “USB debugging“ in the settings menu of your Android device before connecting the Pocket Projector via USB; your Android
device should be recognized as USB storage device.
Philips · PPX2330 · 2340
9 Appendix
Technical Data
Dimensions (L¦×¦H¦×¦W)...................3.7¦×¦0.87¦×¦2.09 inch
Weight ......................................................................... 4.94¦oz
Recommended Ambient........................................5¦–¦35¦ºC
Relative Humidity ..................15¦–¦85¦% (non-condensing)
File format................................ *.avi, *.mov, *.mp4, *.mkv,
*.divx, *.dat, *.mpg, *.mpeg, *.vob, *.ts, *.rm, *.rmvb
Photo formats ..................................................... JPEG, BMP
Music formats.................MP3, WAV, WMA, OGG,AAC
Video Standard (CVBS) (PPX2340) ...................................
........................................................ PAL, SECAM, NTSC
Headphone connection (PPX2340) ...................................
.............................................Mono - jack plug: 0.14 inch
Audio Output...................................................................1¦W
Internal memory.............................................................2¦GB
Compatible Memory Cards .................. micro SD/SDHC
USB port max. load............................................5V, 500mA
Technology / Optical
Display technology ...................................... nHD 0,2“ DLP
Light source ........................................................... RGB LED
Resolution ......................................................640¦x¦360¦pixel
Supported aspect ratio...........................................16:9, 4:3
Brightness (Bright Mode).......................... up to 40 lumen
Contrast ratio .............................................................1500:1
Projected image size ..........................................10¦–¦60¦inch
Screen distance ..................................................12¦–¦80 inch
Horizontal Scan Rate........................................ 31¦–¦¦69¦kHz
Vertical Scan Rate ................................................56¦–¦85¦Hz
Built-in Rechargeable Battery
Battery type ...................................................................Li-Ion
Capacity .........................................................2600mAh 3.7V
Charging time..................................................................... 3¦h
Operating time................................................................1.5¦h
Operating time (ECO mode) ......................................... 2¦h
Manufacturer ............................. Mbell Technology Group
Minimum PC Requirements
Processor ..................... Intel Pentium M or AMD Athlon
Clock rate ..................................................................... 2GHz
Operating System....... Windows XP Professional (SP2),
.......................................... Windows Vista, Windows 7
RAM........................................................ 1GB DDR SDRAM
Free Hard Drive Space ............................................. 40 MB
USB Port.....................................................................USB 2.0
Compatible Power Supply
Manufacturer ............. Kuantech Incorporated Company
Model No....................................... KSAPK0110500200HE
Input. ................................................................. 100-240VAC
Output ..........................................................................5V, 2A
All data are provided for reference purposes only.
Sagemcom Documents SAS reserves the right to
make any changes without prior notice.
Appendix
23
The CE marking certifies that the product meets the
main requirements of the European Parliament and
Council directives 2006/95/CE, 2004/108/CE and 2009/
125/CE on telecommunications terminal equipment,
regarding safety and health of users and regarding electromagnetic interference.
The declaration of compliance can be consulted on the
site www.picopix.philips.com.
Preservation of the environment as part of a sustainable
development plan is an essential concern of Sagemcom
Documents SAS. The desire of Sagemcom Documents
SAS is to operate systems observing the environment.
The desire of Sagemcom Documents SAS is to operate
systems observing the environment and consequently it
has decided to integrate environmental performances in
the life cycle of this product, from manufacturing to
commissioning use and elimination.
FCC notice: This device has been tested and found to
comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this device does
cause harmful interference to radio or television reception, which can be determined by turning the device off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and
receiver.
• Connect the device into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
24
Packaging: The presence of the logo (green dot)
means that a contribution is paid to an approved
national organisation to improve package recovery and
recycling infrastructures. Please respect the sorting
rules set up locally for this kind of waste.
Batteries: If your product contains batteries, they
should be disposed of at an appropriate collection point.
Trademarks: The mentioned references in this manual are trademarks of the respective companies. The
lack of the trademarks É and Ë does not justify the
assumption that these dedicated terminologies are free
trademarks. Other product names used herein are for
identification purposes only and may be trademarks of
their respective owners. Sagemcom Documents SAS
disclaims any and all rights in those marks.
Neither Sagemcom Documents SAS nor its affiliates
shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred
by the purchaser or third parties as a result of accident,
misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with Sagemcom Documents SAS
operating and maintenance instructions.
Sagemcom Documents SAS shall not be liable for any
damages or problems arising from the use of any
options or any consumable materials other than those
designated as original Sagemcom Documents SAS /
PHILIPS products or Sagemcom Documents SAS /
PHILIPS approved products.
Sagemcom Documents SAS shall not be held liable for
any damage resulting from electromagnetic interference
that occurs from the use of any interface cables other
than those designated as Sagemcom Documents SAS /
PHILIPS products.
All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system or transmitted
in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the
prior written permission of Sagemcom Documents SAS.
The information contained herein is designed only for
use with this product. Sagemcom Documents SAS is not
responsible for any use of this information as applied to
other devices.
This user manual is a document that does not represent
a contract.
Errors, printing errors and changes are reserved.
Copyright È 2012 Sagemcom Documents SAS
Philips · PPX2330 · 2340
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V.
and are used by Sagemcom Documents SAS under license from Koninklijke Philips Electronics N.V.
È 2012 Sagemcom Documents SAS
All rights reserved
Sagemcom Documents SAS
Documents Business Unit
Headquarters : 250, route de l’Empereur
92848 Rueil-Malmaison Cedex · FRANCE
Tel: +33 (0)1 57 61 10 00 · Fax: +33 (0)1 57 61 10 01
www.sagemcom.com
Simplified Joint Stock Company · Capital 8.479.978 € · 509 448 841 RCS Nanterre
PPX2330 · 2340
NORAM-EN
253509586-D