English
ASUS
User Manual
ET2301 Series
English
E8285
June 2013
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in
a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA,
INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING
FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective
companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE
SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS
ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING
THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from
ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no
more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other
actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this
Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are
collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR
DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR
ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR
RESELLER IS INFORMED OF THEIR POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at http://support.asus.com
Table of Contents
English
About this manual................................................................................................................................................. 5
Safety information................................................................................................................................................. 7
Package contents................................................................................................................................................... 9
Chapter 1: Hardware Setup
Getting to know your All-in-One PC................................................................................................................ 11
Front view..................................................................................................................................................................... 11
Rear view...................................................................................................................................................................... 13
Left side view.............................................................................................................................................................. 15
Right side view........................................................................................................................................................... 16
Chapter 2: Using your All-in-One PC
Positioning your All-in-one PC.......................................................................................................................... 21
Connecting a wireless keyboard and mouse............................................................................................... 23
Powering on your All-in-One PC....................................................................................................................... 24
Using the On Screen Display (OSD) Menu.................................................................................................... 25
Configuring the audio output via an HDMI device.................................................................................... 27
Gestures..................................................................................................................................................................... 29
Using Ai Crosslink................................................................................................................................................... 31
Installing Ai Crosslink............................................................................................................................................... 31
Troubleshooting the Ai Crosslink Installation................................................................................................. 32
Setting up Ai Crosslink ........................................................................................................................................... 33
Using Ai Crosslink Features . ................................................................................................................................. 34
Using Device Share................................................................................................................................................ 35
Chapter 3: Working with Windows® 8
Starting for the first time (For Windows® 8 and Windows® 8 Professional)........................................ 37
Windows® 8 lock screen........................................................................................................................................ 37
Windows® UI............................................................................................................................................................. 38
Start screen.................................................................................................................................................................. 38
Windows® apps.......................................................................................................................................................... 39
Hotspots....................................................................................................................................................................... 39
All-in-One PC ET2301
Table of Contents
English
Working with Windows® apps............................................................................................................................ 42
Launching apps.......................................................................................................................................................... 42
Customizing apps...................................................................................................................................................... 42
Accessing All Apps.................................................................................................................................................... 43
Charm bar..................................................................................................................................................................... 44
Snap feature................................................................................................................................................................ 46
Other keyboard shortcuts................................................................................................................................... 47
Turning your All-in-One PC off.......................................................................................................................... 48
Chapter 4: Connecting to the Internet
Setting up a Wi-Fi connection in Windows® 8.............................................................................................. 49
Setting up a Wired connection in Windows® 8............................................................................................ 50
Configuring a dynamic IP/PPPoE network connection............................................................................... 50
Configuring a static IP network connection.................................................................................................... 53
Setting up a Bluetooth Wireless Connection............................................................................................... 54
Chapter 5: Recovering your system
Entering the BIOS Setup...................................................................................................................................... 57
Resetting your All-in-One PC in Windows® 8................................................................................................ 58
Recovering from a system image file in Windows® 8................................................................................. 59
Creating a USB recovery drive.............................................................................................................................. 59
Removing everything and reinstalling Windows® 8................................................................................... 60
Appendices
Notices....................................................................................................................................................................... 61
All-in-One PC ET2301
About this manual
English
This manual provides information about the hardware and software features of your All-in-One
PC.
Chapter 1: Hardware Setup
This chapter details the hardware components of your All-in-One PC.
Chapter 2: Using your All-in-One PC
This chapter provides you with information on using your All-in-One PC.
Chapter 3: Working with Windows® 8
This chapter provides an overview of using Windows® 8 in your All-in-One PC.
Chapter 4: Connecting to the Internet
This chapter provides information on connecting your All-in-One PC to a wired or Wi-Fi
network.
Chapter 5: Recovering your system
This chapter provides recovery options for your All-in-One PC.
Appendices
This section includes notices and safety statements for your All-in-One PC.
All-in-One PC ET2301
Conventions used in this manual
English
To highlight key information in this manual, some text are presented as follows:
IMPORTANT! This message contains vital information that must be followed to complete a task.
NOTE: This message contains additional information and tips that can help complete tasks.
WARNING! This message contains important information that must be followed to keep you safe
while performing tasks and prevent damage to your All-in-One PC's data and components.
Icons
The icons below indicate the devices you can use for completing a series of tasks or procedures
on your All-in-One PC.
Use the touchscreen.
Use the keyboard.
Typography
Bold
This indicates a menu or an item that must be selected.
Italic
This indicates sections that you can refer to in this manual.
All illustrations and screenshots in this manual are for reference only. Actual product
specifications and software screen images may vary with location. Visit the ASUS
website at www.asus.com for the latest information.
All-in-One PC ET2301
Safety information
English
Your All-in-One PC ET2301 is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important that you
read the following safety instructions.
Setting up your system
•
•
•
•
•
•
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these openings. Ensure
that you leave plenty of space around the system for ventilation. Never insert objects of any
kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0˚C and 40˚C.
If you use an extension cord, ensure that the total ampere rating of the devices plugged
into the extension cord does not exceed its ampere rating.
Care during use
•
•
•
•
•
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still remains in the
product. Always unplug all power, modem, and network cables from the power outlets
before cleaning the system.
The touch screen requires periodic cleaning to perform at optimal touch sensitivity. Keep
the screen clean from foreign objects or excessive dust accumulation. To clean the screen:
• Turn off the system and disconnect the power cord from the wall.
• Spray a small amount of household glass cleaner on the supplied cleaning cloth and
gently wipe the surface of the screen.
• Do not spray the cleaner directly on the screen.
• Do not use an abrasive cleaner or a coarse cloth when cleaning the screen.
If you encounter the following technical problems with the product, unplug the power cord
and contact a qualified service technician or your retailer.
• The power cord or plug is damaged.
• Liquid has been spilled into the system.
• The system does not function properly even if you follow the operating instructions.
• The system was dropped or the chassis is damaged.
• The system performance changes.
All-in-One PC ET2301
Sound Pressure Warning
English
Excessive sound pressure from earphones or headphones can cause hearing loss or permanent
damage to hearing. Increasing the volume and equalizer beyond default levels increases the
output voltage and sound pressure produced by the earphones or headphones.
TV Tuner (on selected models)
Note to CATV System Installer—This reminder is provided to call the CATV systems installer’s
attention to Section 820-93 of the National Electric Code, which provides guidelines for
proper grounding and, in particular, specify that the Coaxial cable shield be connected to the
grounding system of the building as close to the point of cable entry as practical.
Adapter
1.Adapter specification
Input voltage: 100–240Vac
Input frequency: 50–60Hz
Rating output current: 180W (19.5V, 9.23A)
Rating output voltage: 19.5Vdc
2.It is recommended that the power socket is in close proximity to the All-in-One PC.
DC Fan Warning
Please note that the DC fan is a moving part and can cause harm when used improperly. Keep
away from the fan when using the product.
All-in-One PC ET2301
English
Package contents
All-in-one PC ET2301
Wireless Keyboard
Wireless Mouse
Quic
k Gu
id
AC adapter
Power cord
e
Quick Start Guide
ABC
1
3
JKL
MNO
5
6
TUV
7
WXYZ
9
8
*
#
0
CLEAR
R
DEF
2
GHI
4
PQRS
ENTER
G
Y
B
T
Wireless Keyboard and Mouse
USB receiver dongle
Subwoofer (optional)
Remote Control (optional)
NOTE: The keyboard, mouse, AC adapter, remote
control, ASUS Link cable, subwoofer, and KBM USB
receiver dongle illustrations are for reference only. Actual
product specifications may vary according to location.
ASUS Link Cable
All-in-One PC ET2301
English
10
All-in-One PC ET2301
English
Chapter 1: Hardware Setup
Getting to know your All-in-One PC
Front view
All-in-One PC ET2301
11
English
Digital microphone (Built-in)
The built-in digital microphone can be used for video conferencing, voice narrations,
audio recordings and multimedia applications.
Webcam
The built-in webcam with the built-in digital microphone allows you to start video
chats online.
Webcam LED
Indicates that the built-in webcam is enabled.
Remote Control Receiver
The remote control receiver receives the infrared signal from the remote control.
Touch-enabled LCD display
The 23” LCD display features full HD 1920 x 1080 resolution with capacitive touch
input.
Menu Down button
Press this button to move down the options when the Menu is displayed.
Menu button
Press this button display the menu. Press this button as you navigate the menu to
enter/select the highlighted option.
Menu Up button
Press this button to move up the options when the Menu is displayed.
12
All-in-One PC ET2301
English
Rear view
Antenna socket
Connect standard indoor or outdoor male antenna connectors to receive over-the-air
broadcast TV signals.
NOTE: The antenna socket is available for models with the optional TV Tuner card.
HDMI Input Port
When using the HDMI-in mode, use the HDMI Input port for receiving video/audio
signals from another source such as a set-top-box or DVD player.
All-in-One PC ET2301
13
English
HDMI Output Port
Connect this port with devices equipped with an HDMI input port, such as an LCD
monitor or projector.
LAN port
This eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a
local network.
Subwoofer jack
This jack is used to connect to an ASUS All-in-One PC subwoofer for producing
powerful bass (low frequency sounds) when playing multimedia.
Power input
The supplied power adapter converts AC power to DC power for use with this jack. To
prevent damage to the PC, always use the supplied power adapter.
WARNING! The power adapter may get warm or hot when in use. Do not cover the
adapter and keep it away from your body.
14
All-in-One PC ET2301
English
Left side view
Mode button
Press this button to switch the display signal source from PC to HDMI Input.
Menu lock
Press this button to activate or deactivate the MENU button on the front panel.
USB 3.0 port
This USB (Universal Serial Bus) port provides a transfer rate of up to 5Gbit/s and is
backward compatible with USB2.0.
USB 3.0 port
This USB (Universal Serial Bus) port provides a transfer rate of up to 5Gbit/s and is
backward compatible with USB2.0.
This port supports the AI Charger II feature, allowing you to quickly charge compatible
devices. To enable the AI Charger II on your All-in-One PC, go to Desktop>AI Suite
II>AI Charger II then select Enable.
Headphone output and S/PDIF output combo jack
This combo jack supports speakers, headphones, and S/PDIF audio devices.
Microphone jack
The microphone jack is designed to connect to a microphone used for video
conferencing, voice narrations, or simple audio recordings.
All-in-One PC ET2301
15
Right side view
English
ET2301INTH
6-in-1 Memory card reader
This All-in-One PC has a single built-in memory card reader slot that supports MS,
MS-Pro, MMC, SD, SDXC, and SDHC formats.
IMPORTANT! Memory cards are keyed so that it can only be inserted into the slot in one
direction. Insert the card with the label facedown. Do not force a card into the slot to
avoid damaging the card.
ThunderBolt Ports
Use a Thunderbolt adapter to connect your All-in-one PC to a DisplayPort, VGA, DVI,
or HDMI external display* and experience high-resolution display features via Intel®
Thunderbolt™ technology.
IMPORTANT! * The Thunderbolt ports support external displays that are Thunderboltcertified for Windows®. For the latest Thunderbolt-certified devices for Windows®, visit
https://thunderbolttechnology.net/products
NOTE: To ensure that the Thunderbolt-certified device for Windows functions properly,
visit the device vendor’s website.
16
All-in-One PC ET2301
English
USB 2.0 port
This USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such
as keyboards, pointing devices, flash disk drives, external HDDs, cameras and printers.
USB 3.0 port
This USB (Universal Serial Bus) port provides a transfer rate of up to 5Gbit/s and is
backward compatible with USB2.0.
This USB 3.0 port supports Device Share. Use this port for connecting the ASUS Link
cable to another device such as a notebook PC or Android tablet.
NOTE: For instructions on setting up Device Share, please refer to Using Device Share.
USB 3.0 port
This USB (Universal Serial Bus) port provides a transfer rate of up to 5Gbit/s and is
backward compatible with USB2.0.
This USB 3.0 port supports Ai Crosslink. Use this port for connecting the ASUS Link
cable to another Windows® 8 PC.
NOTE: For instructions on setting up Ai Crosslink, please refer to Using Ai Crosslink.
Optical Drive
The built-in optical drive may support compact discs (CD), digital video discs (DVD),
and/or Blu-ray discs (BD), and recordable (R) or re-writable (RW) media. Consult
product specifications for details on included optical drive.
Optical disc drive eject button
Press this button to eject the optical drive tray.
Optical disc drive manual eject hole
The manual eject hole is used to eject the drive tray in case the eject button does not
work.
WARNING! Use the manual eject hole only when the eject button does not work.
Kensington® lock hole
The Kensington® lock hole allows you to secure your PC using Kensington® compatible
PC security products.
All-in-One PC ET2301
17
ET2301IUTH
English
6-in-1 Memory card reader
This All-in-One PC has a single built-in memory card reader slot that supports MS, MSPro, MMC, SD, SDXC, and SDHC formats.
IMPORTANT! Memory cards are keyed so that it can only be inserted into the slot in one
direction. Insert the card with the label facedown. Do not force a card into the slot to
avoid damaging the card.
USB 2.0 port
This USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such
as keyboards, pointing devices, flash disk drives, external HDDs, cameras and printers.
USB 3.0 port
This USB (Universal Serial Bus) port provides a transfer rate of up to 5Gbit/s and is
backward compatible with USB2.0.
This USB 3.0 port supports Device Share. Use this port for connecting the ASUS Link
cable to another device such as a notebook PC or Android tablet.
NOTE: For instructions on setting up Device Share, please refer to Using Device Share.
18
All-in-One PC ET2301
English
USB 3.0 port
This USB (Universal Serial Bus) port provides a transfer rate of up to 5Gbit/s and is
backward compatible with USB2.0.
This USB 3.0 port supports Ai Crosslink. Use this port for connecting the ASUS Link
cable to another Windows 8 PC.
NOTE: For instructions on setting up Ai Crosslink, please refer to Using Ai Crosslink.
Optical Drive
The built-in optical drive may support compact discs (CD), digital video discs (DVD),
and/or Blu-ray discs (BD), and recordable (R) or re-writable (RW) media. Consult
product specifications for details on included optical drive.
Optical disc drive eject button
Press this button to eject the optical drive tray.
Optical disc drive manual eject hole
The manual eject hole is used to eject the drive tray in case the eject button does not
work.
WARNING! Use the manual eject hole only when the eject button does not work.
Kensington® lock hole
The Kensington® lock hole allows you to secure your PC using Kensington® compatible
PC security products.
All-in-One PC ET2301
19
English
20
All-in-One PC ET2301
English
Chapter 2: Using your All-in-One PC
Positioning your All-in-one PC
1.Place your All-in-One PC on a flat surface
such as a table or desk.
2.The display can be adjusted to an angle
between 50 to 1770.
5O
IMPORTANT! Avoid adjusting the display to
an angle beyond the recommended values or
you may risk damaging the All-in-One PC.
177O
3.To adjust the angle of the display, hold the
upper-right corner with your right hand
while supporting the lower-left corner with
your left hand.
All-in-One PC ET2301
21
4.Carefully tilt the display using both hands until it is at a comfortable angle.
English
22
All-in-One PC ET2301
English
Connecting a wireless keyboard and mouse
1.Install batteries into the wireless keyboard and mouse.
2.Connect the wireless dongle for keyboard and mouse to a USB port.
NOTE: ASUS recommends that you connect the wireless dongle to the USB 2.0 port.
3.You can begin using the wireless keyboard and mouse.
NOTES:
• Reconnect the wireless keyboard and mouse with the wireless dongle if they lose
connection. Avoid using either devices alongside other wireless devices. Position
the mouse and keyboard at least 20 cm away from other wireless hardware to avoid
interference.
• The illustrations above are for reference only. Actual hardware and specifications of the
wireless keyboard and mouse vary.
All-in-One PC ET2301
23
English
Powering on your All-in-One PC
Connect the supplied AC adapter to the DC IN jack on the rear panel (
) and then
press the Power button on the right panel ( ) of the All-in-One PC to power on the system.
WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug
to the system. Doing so may damage the AC-DC adapter.
NOTE: For details on turning off your All-in-One PC, refer to the section Turning off your All-in-One
PC in Working with Windows® 8.
24
All-in-One PC ET2301
English
Using the On Screen Display (OSD) Menu
The On Screen Display (OSD) menu will appear when you:
1.Press the Menu button on the front panel.
2.Connect an HDMI cable to the rear HDMI input port.
Using the OSD Menu
To display the OSD menu, press the Menu button on the front panel. To navigate through the
OSD functions or modify OSD settings, press the Menu Up or Menu Down keys on the front
panel. To activate the selected function, press the Menu button again.
NOTE: Refer to the section Getting to know your All-in-One PC for the location of the front panel
buttons.
Panel Off
Press this button to switch off the display.
Color
• Brightness: This setting can be adjusted using values between 0 to 100.
• Contrast: This setting can be adjusted using values between 0 to 100.
• Color Temp. : Four color modes are available - Cool, Normal, Warm, and User mode.
Image
• Sharpness: This setting can be adjusted using values between 0 to 100.
• Aspect Control: Select the aspect ratio to “Full” or “OverScan”. This setting is available
only when you use the All-in-One PC as a standard desktop LCD monitor.
• Auto Adjust: Adjusts the horizontal position (H-Position) and the vertical position (VPosition) of the display. This feature is available only when you use the All-in-One PC as
a standard desktop LCD monitor.
Input Select
• PC: Displays video produced by the All-in-One PC.
• HDMI: Display video input from the HDMI Input port.
All-in-One PC ET2301
25
English
System Setup
• OSD Setup:
1.
2.
3.
4.
•
•
•
•
H-Position - Adjusts the horizontal position of the OSD menu.
V-Position - Adjusts the vertical position of the OSD menu.
OSD Timeout - Sets the display duration of OSD menu from 10 to 120 seconds.
DDC/CI - Enables or disables the DDC/CI (Display Data Channel/Command
Interface).
Information: Displays resolution and refresh rate.
Language: Sets the OSD language.
Device Share: Enables or disables the Device Share feature. When enabled, the HDMI
item under the Input Select menu will be displayed as HDMI with Device Share.
All Reset: Resets all OSD settings to defaults.
Exit
Exit from the OSD menu.
Input signal selection
The Input Select menu appears when you connect an HDMI cable to the rear HDMI ports or
a Thunderbolt cable to one of the Thunderbolt ports on the left panel. Use the Menu Up or
Menu Down buttons to select input source and press the Menu button to activate the option.
Refer to Input Select in the previous section for details.
26
All-in-One PC ET2301
English
Configuring the audio output via an HDMI device
If you want to use a high-definition TV as an audio output device, connect it to the All-in-One
PC and follow the steps below to configure the audio settings.
To configure the audio output via an HDMI device:
1.From the Start screen, click Desktop to
launch the Desktop Mode.
NOTE: For more details, refer to the
section Start Screen under Working with
Windows® 8.
2.Right-click the Volume Mixer icon on the
Windows® taskbar and click Playback
devices.
3.From the Playback screen, select Digital
Audio (HDMI).
4.Click Configure and the Speaker Setup
window pops up.
All-in-One PC ET2301
27
English
5.Select Stereo and click Next.
6.Select the Front left and right option, and
click Next.
7.Click Finish to exit the speaker setup.
28
All-in-One PC ET2301
English
Gestures
Gestures allow you to launch programs and access the settings of your All-in-One PC.
Functions can be activated by using the hand gestures to your All-in-One PC’s display panel.
Using gestures
Left edge swipe
Right edge swipe
Swipe from the left edge of the screen to
shuffle your running apps.
Swipe from the right edge of the screen to
launch the Charm bar.
Top edge swipe
Finger slide
•
Slide your finger to scroll up and down and
slide your finger to pan the screen left or
right.
•
In the Start screen, swipe from the top
edge of the screen to view the All Apps
bar.
In a running app, swipe the from top
edge of the screen to view its menu.
All-in-One PC ET2301
29
English
Zoom out
Zoom in
Bring together your two fingers on the
touch panel.
Spread apart your two fingers on the touch
panel.
Tap and hold
Tap/Double tap
•
•
•
•
30
To move an app, tap and hold the app
tile and drag it to a new location.
To close an app, tap and hold the top
side of the running app and drag it down
to the bottom of the screen to close it.
Tap an app to launch it.
On Desktop mode, double-tap an item to
launch it.
All-in-One PC ET2301
Using Ai Crosslink
English
Ai Crosslink lets you drag and drop and copy/paste files, text, and multimedia between
the All-in-One PC and another Windows® PC.
Installing Ai Crosslink
To install Ai Crosslink:
1.Connect one end of the provided ASUS Link cable to the designated USB port that supports
Ai Crosslink.
NOTES:
• Use only the provided ASUS Link cable when setting up Ai Crosslink. Using a cable other
than the provided ASUS Link cable can damage the port.
• Refer to the section Getting to know your All-in-One PC for the location of the USB port
designated for Ai Crosslink.
2.Connect the other end of the ASUS Link cable to any USB port on a PC running Windows®
OS.
Windows®
3.On the All-in-One PC desktop, locate the ASUS
Ai Crosslink widget. Click the Ai Crosslink logo.
All-in-One PC ET2301
31
English
4.On the other Windows® device, a popup
will be displayed indicating the Ai Crosslink
Setup CD. Click Run AACLoader.exe to
begin installation.
5.Once the ASUS Ai Crosslink window
appears, setup is complete.
Troubleshooting the Ai Crosslink Installation
1.If the popup for the Ai Crosslink Setup CD
does not appear on the Windows® 8 device,
check if the ASUS Link cable is connected
properly.
2.Launch File Manager. Click the ASUS Ai
Crosslink icon.
32
All-in-One PC ET2301
English
3.Click AACLoader.exe to install Ai Crosslink.
Setting up Ai Crosslink
1.Click the ASUS Ai Crosslink icon on the
System Tray.
2.On the context menu, click The Position
of Other PC and select the location of the
other PC.
3.Click Preferences for additional options
such as sharing of Clipboard items,
notifications, and Keyboard and Mouse
controls.
All-in-One PC ET2301
33
Using Ai Crosslink Features
English
Using Ai Crosslink you can:
•
•
•
•
Click Use Mouse Off the Edge of Screen in Preferences to move the mouse pointer across
the desktop displays of the two PCs.
Use the keyboard on one PC to input text on the other PC.
Copy and paste text or images between the two PCs.
Drag and drop files or folders between the two PCs.
Windows® 8
34
Mouse pointer
Keyboard use
Clipboard text/images
File transfer
Windows®
All-in-One PC ET2301
Using Device Share
English
Your All-in-One PC can be used as a standard desktop LCD display and with Device Share
enabled, you can share the display, keyboard, mouse, webcam*, and touch screen*
display of the All-in-One PC with any notebook PC, desktop PC, or Android tablet.
NOTE: Device Share access for webcams and touch screens only works with devices running
Microsoft Windows®.
1.Enable the Device Share feature in the System Setup menu in the OSD.
NOTE: For instructions on accessing the OSD, please refer to the section Using the On Screen
Display (OSD) Menu.
2.Connect one end of the provided ASUS Link cable to the designated USB 3.0 port that
supports Device Share.
NOTES:
• Use only the provided ASUS Link cable when setting up Device Share. Using a cable other
than the provided ASUS Link cable can damage the port.
• Refer to the section Getting to know your All-in-One PC for the location of the USB 3.0 port
designated for Device Share.
3.Connect the other end of the ASUS Link cable to a USB port on a notebook PC, desktop PC,
or Android tablet.
4.To share the display, connect one end of a male-to-male HDMI cable to the HDMI port of
the All-in-One PC. Connect the other end of the HDMI cable to the desktop PC, laptop PC or
Android tablet.
All-in-One PC ET2301
35
English
5.The Input Select menu appears when you connect an HDMI cable to the rear HDMI port.
Use the Menu Up or Menu Down buttons to select input source and press the Menu
button to activate the option.
NOTES:
• By default, the All-in-One PC is set to PC mode, where the All-in-One PC is the display
input source. The touch screen, webcam and rear USB ports will be controlled by the Allin-One PC even if Device Share is enabled.
• When switching the display input source to HDMI (where the All-in-One PC is used as a
desktop LCD monitor), the touch screen, webcam, and rear USB ports will be controlled
by the external notebook/desktop PC if Device Share is enabled.
• Device Share can be enabled even if the All-in-One PC is powered off. If you power on the
All-in-One PC while using an external device on Device Share, an Input Select OSD menu
will appear for display signal selection.
36
All-in-One PC ET2301
English
Chapter 3: Working with Windows® 8
Starting for the first time (For Windows® 8 and
Windows® 8 Professional)
When you start your computer for the first time, a series of screens appear to guide you in
configuring the basic settings of your Windows® 8 operating system.
To start for the first time:
1.Press the power button on your All-in-One PC. Wait for a few minutes until the setup screen
appears.
2.Select a language to use on your All-in-One PC.
3.Carefully read the License Terms. Tick I accept the terms for using Windows then click
Accept.
4.Follow the onscreen instructions to configure the following basic items:
•
Personalize
•
Wireless
•
Settings
•
Sign in to your PC
5.Once you are done configuring the basic items, a Windows®8 tutorial appears. Watch this
tutorial to learn more about Windows®8 functionalities.
6.The Start screen appears after successfully signing in to your user account.
Windows® 8 lock screen
The Windows®8 lock screen may appear when your All-in-One PC enters the Windows®8
operating system. To proceed, tap on the lock screen or press any key on your All-in-One PC's
keyboard.
All-in-One PC ET2301
37
Windows® UI
English
The Window® User Interface (UI) is the tile-based display used in Windows® 8. It includes the
following features you can use while working on your All-in-One PC.
Start screen
The Start screen appears after successfully signing in to your user account. It helps organize all
the programs and applications you need in just one place.
User account
live tiles
Zoom in/out button
for live tiles
38
All-in-One PC ET2301
English
Windows® apps
These are apps pinned on the Start screen and displayed on tiled-format for easy access.
IMPORTANT! A screen resolution of 1024 x 768 pixels or higher is required to run Windows® apps.
NOTE: Some apps require signing in to your Microsoft account before they are fully launched.
Hotspots
Onscreen hotspots allow you to launch programs and access the settings of your PC. The
functions in these hotspots can be activated using your mouse.
Hotspots on a running app
All-in-One PC ET2301
39
Hotspots on the Start screen
English
NOTE: Refer to the next page for the Hotspots’ functions.
40
All-in-One PC ET2301
Action
upper left corner
Hover your mouse pointer then tap on the recent app’s thumbnail to
revert back to that running app.
English
Hotspot
If you launched more than one app, slide down to show all running
apps.
lower left corner
From a running app screen:
Hover your mouse pointer then tap on the Start screen’s thumbnail to
go back to the Start screen.
NOTE: You can also press the Windows key
to go back to the Start screen.
on your keyboard
From the Start screen:
Hover your mouse pointer then tap on the running app’s thumbnail to
go back to that app.
Hover your mouse pointer then click on the recent app’s thumbnail to
go back to that app.
top
Hover your mouse pointer until it changes to a hand icon. Drag then
drop the app to a new location.
NOTE: This hotspot function only works on a running app or when
you want to use the Snap feature. For more details, refer to Snap feature
under Working with Windows® apps.
upper and lower
right corner
All-in-One PC ET2301
Hover your mouse pointer to launch the Charm bar.
41
Working with Windows® apps
English
Use your All-in-One PC’s touchscreen or keyboard to launch and customize your apps.
Launching apps
Tap an app to launch it.
1. Press
2. Press
twice then use the arrow keys to browse through the apps.
to launch your selected app.
Customizing apps
You can move, resize, or unpin apps from the Start screen using the following steps.
Moving apps
Tap and hold the app tile and drag it to a new location.
Resizing apps
Swipe down the app tile to select and launch its settings bar. Tap
tap
to reduce or
to enlarge an app.
Unpinning apps
Swipe down the app tile to select and launch its settings bar. Tap
an app.
42
to unpin
All-in-One PC ET2301
English
Closing apps
Tap and hold the top side of the running app then drag it down to the bottom of
the screen to close it.
From the running app’s screen, press
.
Accessing All Apps
Aside from the apps already pinned on your Start screen, you can also open other applications
like the exclusive ASUS Software apps bundled with your All-in-One PC through the Apps
screen.
Launching the Apps screen
Launch the Apps screen using your All-in-One PC's touchscreen or keyboard.
1. Swipe down the app tile to select and launch its settings bar.
2. Tap
to show all installed apps in your All-in-One PC.
From the Start screen, press
press
All-in-One PC ET2301
to select the All Apps icon
then
.
43
Pinning more apps on the Start screen
English
You can pin more apps on the Start screen using your touchscreen.
1. Swipe down the app tile to select and launch its settings bar.
2. Tap
to pin the selected app to the Start screen.
Charm bar
The Charm bar is a toolbar that can be triggered on the right side of your screen. It consists of
several tools that allow you to share applications and provide quick access for customizing the
settings of your All-in-One PC.
Charm Bar
Launching the Charm bar
NOTE: When called out, the Charm bar initially appears as a set of white icons. The image above
shows how the Charm bar looks like once activated.
Use your All-in-One PC’s touchscreen or keyboard to launch the Charm bar.
Swipe the right edge of the screen.
Press
44
.
All-in-One PC ET2301
English
Inside the Charm bar
Search
This tool allows you to look for files, applications, or programs in your All-in-One
PC.
Share
This tool allows you to share applications via social networking sites or email.
Start
This tool reverts the display back to the Start screen. From the Start screen, you
can also use this to revert back to a recently opened app.
Devices
This tool allows you to access and share files with the devices attached to your
All-in-One PC such as an external display or printer.
Settings
This tool allows you to access the PC settings of your All-in-One PC.
All-in-One PC ET2301
45
Snap feature
English
The Snap feature displays two apps side-by-side, allowing you to work or switch between apps.
IMPORTANT! Ensure that your All-in-One PC’s screen resolution is set to 1366 x 768 pixels or
higher before using the Snap feature.
Snap bar
Using Snap
Perform the following steps to activate Snap using your All-in-One PC’s touchscreen or
keyboard.
1. Launch the app you wish to snap.
2. Hover the mouse point on the top side of your screen.
3. Once the pointer changes to a hand icon, drag then drop the app to the left or
right side of the display panel.
4. Launch another app.
1. Launch the app you wish to snap.
2. Press
.
3. To switch between apps, press
46
.
All-in-One PC ET2301
Other keyboard shortcuts
\
English
Using the keyboard, you can also use the following shortcuts to help you launch applications
and navigate Windows®8.
Switches between the current and the last running app
Launches the desktop
Launches the Computer window on Desktop mode
Opens the File search pane
Opens the Share pane
Opens the Settings pane
Opens the Devices pane
Activates the Lock screen
Minimizes the Internet Explorer window
Opens the Second screen pane
Opens the Apps search pane
Opens the Run window
All-in-One PC ET2301
47
English
Opens Ease of Access Center
Opens the Settings search pane
Opens a menu box of Windows tools
Launches the magnifier icon and zooms in your screen
Zooms out your screen
Opens the Narrator Settings
Enables the print screen function
Turning your All-in-One PC off
Do either of the following to shut down your All-in-One PC:
on the Charm bar then tap
• Tap
shutdown.
• From the log-in screen, tap
> Shut down to do a normal
> Shut down.
• If your All-in-One PC is unresponsive, press and hold the power button for at
least four (4) seconds until your All-in-One PC turns off.
48
All-in-One PC ET2301
English
Chapter 4: Connecting to the Internet
Access emails, surf the Internet, and share applications via social networking sites on or from
your PC using wireless/Wi-Fi or wired connection.
Setting up a Wi-Fi connection in Windows® 8
1.Launch the Charm bar from the Start screen or from any application mode.
NOTE: For details, refer to the section Charm bar under Working with Windows® apps.
Charm Bar
2.From the Charm bar, select Settings and click the network icon
.
3.Select the wireless network that you want to connect to from the list.
4.Click Connect.
All-in-One PC ET2301
49
English
Setting up a Wired connection in Windows® 8
1.Use a network (RJ-45) cable to connect your All-in-One PC to a DSL/cable modem or a local
area network (LAN).
2.Turn on your computer.
3.Configure the necessary Internet connection settings.
NOTES:
• For more details, refer to the sections Configuring a dynamic IP/PPPoE network connection
or Configuring a static IP network connection.
• Contact your Internet Service Provider (ISP) for details or assistance in setting up your
Internet connection.
Configuring a dynamic IP/PPPoE network connection
To configure a dynamic IP/PPPoE or static IP network connection:
1.From the Start screen, click Desktop to launch the Desktop mode.
50
All-in-One PC ET2301
and click Open Network and
English
2.From the Windows® taskbar, right-click the network icon
Sharing Center.
3.From the Open Network and Sharing Center screen, click Change Adapter settings.
4.Right-click on your LAN and select Properties.
5.Click Internet Protocol Version 4(TCP/IPv4) and click
Properties.
6.Click Obtain an IP address automatically and click OK.
NOTE: Continue to the next steps if you are using PPPoE connection.
All-in-One PC ET2301
51
English
7.Return to the Network and Sharing Center
and then click Set up a new connection or
network.
8.Select Connect to the Internet and click Next.
9.Select Broadband (PPPoE) and click Next.
52
All-in-One PC ET2301
English
10.Enter your Username, Password, and Connection
name. Click Connect.
11.Click Close to finish the configuration.
12.Click the network icon in the taskbar and click the
connection you just created.
13.Enter your user name and password. Click Connect to
connect to the Internet.
Configuring a static IP network connection
To configure a static IP network connection:
1.Repeat steps 1 to 5 of the previous section Configuring
a dynamic IP/PPPoE network connection.
2 Click Use the following IP address.
3.Enter the IP address, Subnet mask and Gateway from
your service provider.
4.If needed, enter the preferred DNS Server address and
alternative address.
5.When done, click OK.
All-in-One PC ET2301
53
English
Setting up a Bluetooth Wireless Connection
(Selected models only)
Bluetooth technology eliminates the need for cables for connecting to Bluetooth-enabled
devices. Examples of Bluetooth-enabled devices include Notebook PCs, Desktop PCs, and
mobile phones.
NOTE: If your All-in-One PC did not come with built-in Bluetooth, you need to connect a USB
Bluetooth module in order to use Bluetooth.
To add a Bluetooth device in Windows® 8:
1.Press FN+F2 until the wireless LAN and
Bluetooth icons are displayed and enabled.
You can also double-click the Wireless
Console icon in the Windows notification
area and select the Bluetooth icon.
54
All-in-One PC ET2301
English
2.Click the Bluetooth logo on the System Tray
and select Add a Device from the context
menu .
3.In the PC settings window, click Add a
device to look for available Bluetooth
devices.
All-in-One PC ET2301
55
4.Select a Bluetooth device from the list.
English
5.Windows will display a Bluetooth passcode.
Select Yes to confirm and pair the All-inOne PC with the Bluetooth device.
6.Bluetooth pairing has been successfully set
up.
56
All-in-One PC ET2301
English
Chapter 5: Recovering your system
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware settings that are needed for
system startup in the PC.
In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal
performance. Do not change the default BIOS settings except in the following circumstances:
•
•
An error message appears on the screen during the system bootup and requests you to run
the BIOS Setup.
You have installed a new system component that requires further BIOS settings or update.
WARNING! Inappropriate BIOS settings may result in instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of trained service personnel.
Quickly enter the BIOS
Windows® 8 boot time is quite fast, so we developed three ways for you to quickly access the
BIOS:
•
•
•
When your All-in-One PC is off, press the power button for at least four (4) seconds to access
the BIOS directly.
Press the power button for at least four (4) seconds to shut down your All-in-One PC, then
press the power button again to turn your All-in-One PC back on, and press <F2> during
POST.
When your All-in-One PC is off, disconnect the power cord from your All-in-One PC’s power
connector. Reconnect the power cord and press the power button to turn on your All-inOne PC. Press <F2> during POST.
NOTE: POST (Power-On Self Test) is a series of software controlled diagnostic tests that run when
you turn on your All-in-One PC.
All-in-One PC ET2301
57
English
Resetting your All-in-One PC in Windows® 8
The Reset your PC option restores your PC to its factory default settings.
IMPORTANT! Back up all your data before using this option.
To reset your All-in-One PC:
1.If your All-in-One PC is off, press the power button to turn on your All-in-One PC.
If your All-in-One PC is already on, launch the Windows® 8 Charm bar then go to Settings >
Change PC settings > General. From the General pane, scroll down to Advanced startup
and tap or tap or click Restart now.
2.Press <F9> during bootup.
3.From the screen, tap or click Troubleshoot.
4.Select Reset your PC.
5.Tap or click Next.
6.Select Only the drive where the Windows is installed.
7.Select Just remove my files.
8.Tap or click Reset.
58
All-in-One PC ET2301
English
Recovering from a system image file in Windows® 8
You can create a USB recovery drive and use this to recover your PC’s settings.
Creating a USB recovery drive
WARNING! All files on your USB storage device will be permanently deleted during the process.
Before you proceed, ensure that you back up all your important data.
To create a USB recovery drive:
1.Launch the Control Panel from the All Apps screen.
NOTE: For details, refer to Launching the All Apps screen under Working with Windows® apps.
2.From the Control Panel’s System and Security, click Find and fix problems.
3.Tap or click Recovery > Create a recovery drive.
4.Tap or click Next.
NOTE: If the check box is not ticked, no device drivers
and apps will be installed in the recovery device.
5.Select the USB storage device where you want to copy
the recovery files.
6.Click Next.
All-in-One PC ET2301
59
English
7.Click Create. Wait for a while for the process to
complete.
8.When the process is completed, click Finish.
Removing everything and reinstalling Windows® 8
Restoring your PC to its original factory settings can be done using the Remove everything and
reinstall option in PC Settings. Refer to the steps below to use this option.
IMPORTANT! Back up all your data before using this option.
NOTE: This process may take a while to complete.
1.Launch the Charm bar.
2.Click Settings > Change PC Settings > General.
3.Scroll down to view the Remove everything and reinstall Windows option. Under this
option, click Get Started.
4.Follow the onscreen instructions to complete the reinstallation and reset process.
60
All-in-One PC ET2301
English
Notices
Appendices
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of
Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS
REACH website at http://csr.asus.com/english/REACH.htm
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components, as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling
information in different regions.
COATING NOTICE
IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is
applied to insulate the device except on the areas where the I/O ports are located.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
(1) Outdoor operations in the 5.15-5.25GHz band is prohibited.
(2) This device has no Ad-hoc capability for 5250~5350 and 5470~5725 MHz.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
All-in-One PC ET2301
61
Federal Communications Commission Statement
English
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the guarantee of this
device could void the user’s authority to operate the equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
62
All-in-One PC ET2301
IC Radiation Exposure Statement for Canada
English
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. To maintain compliance with IC RF exposure compliance requirements, please
avoid direct contact to the transmitting antenna during transmitting. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
Operation is subject to the following two conditions:
•
•
This device may not cause interference and
This device must accept any interference, including interference that may cause undesired
operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems)
this device is intended to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmitting antenna) installed indoors is subject to licensing.
Because high power radars are located as primary users (meaning they have priority) in 52505350 MHz, these radars cause interference and/or damage to license exempt LAN devices.
Declaration of Conformity (R&TTE directive 1999/5/EC)
The following items were completed and are considered relevant and sufficient:
•
•
•
•
•
•
•
Essential requirements as in [Article 3]
Protection requirements for health and safety as in [Article 3.1a]
Testing for electric safety according to [EN 60950]
Protection requirements for electromagnetic compatibility in [Article 3.1b]
Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301 489-17]
Effective use of the radio spectrum as in [Article 3.2]
Radio test suites according to [EN 300 328-2]
CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
All-in-One PC ET2301
63
CE marking for devices without wireless LAN/Bluetooth
English
The shipped version of this device complies with the requirements of the EEC directives
2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
/
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European
Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications
Equipment and mutual recognition of conformity.
is for class II device.
Wireless Operation Channel for Different Domains
N. America
2.412-2.462 GHz
Ch01 through CH11
Japan
2.412-2.484 GHz
Ch01 through Ch14
Europe ETSI
2.412-2.472 GHz
Ch01 through Ch13
NO DISASSEMBLY
The warranty does not apply to the products that
have been disassembled by users
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
No Exposure to Liquids
DO NOT expose to or use near liquids, rain, or moisture. This product is not
waterproof or oil-proof.
64
All-in-One PC ET2301
English
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not be placed
in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin
indicates that the battery should not be placed in municipal waste.
Global Environmental Regulation Compliance and Declaration
ASUS follows the green design concept to design and manufacture our products, and
makes sure that each stage of the product life cycle of ASUS product is in line with global
environmental regulations. In addition, ASUS disclose the relevant information based on
regulation requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for information disclosure based
on regulation requirements ASUS is complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
Korea RoHS
Swiss Energy Laws
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S. Environmental Protection
Agency and the U.S. Department of Energy helping us all save money and
protect the environment through energy efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY
STAR standard, and the power management feature is enabled by default.
The monitor and computer are automatically set to sleep after 15 and 30
minutes of user inactivity. To wake your computer, click the mouse or press
any key on the keyboard.
Please visit http://www.energy.gov/powermanagement for detail information on power
management and its benefits to the environment. In addition, please visit http://www.
energystar.gov for detail information on the ENERGY STAR joint program.
NOTE: ENERGY STAR is NOT supported on Freedos and Linux-based products.
All-in-One PC ET2301
65
English
Manufacturer
Authorised
representative in
Europe
66
ASUSTeK Computer Inc.
Tel:
+886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN
ASUSTeK Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY
All-in-One PC ET2301