Helpful Hints:
• If using a shower enclosure, please set the
Hot Water on Demand TM on a table outside the enclosure before using.
• It is typical to experience a slight change in water flow & temperature when moving spray adapter from high to low heights.
For information regarding other
Hot Water on Demand TM accessories:
Visit us at www.coleman.com
SPRAY ADAPTER
Instructions for Use
Model 2300-512
The Coleman Co., Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U.S.A.
1-800-835-3278 • TDD: 316-832-8707
©2003 The Coleman Company, Inc. All Rights reserved.
Coleman® is a registered trademark of The Coleman Company, Inc.
2300-051 (05/03)
Use the Spray Adapter with Hot Water on Demand TM for a refreshing hot shower. Easily attaches to faucet with a quick connector.
Assembly Steps:
Make sure your Hot Water on Demand TM unit is turned off and that no water is running through the unit. Operate the unit from a camp table or picnic table. Do not set unit on the ground to use.
1. Attach Handled
Spray Head to
Tubing End.
Hand tighten.
Tubing End
Handled Spray Head
2. Rotate Faucet of the Hot
Water on
Demand TM unit outward to its usage position.
3. Insert end of
Spray Head
Adapter into faucet.
4. Hold Spray
Adapter in your hand.
5. Turn the Hot
Water on
Demand TM on by turning
Control Knob counterclockwise to desired temperature range.
Faucet Fitting
Spray Head Adapter