TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
ENGLISH
FRANÇAIS
TÉLÉVISEUR ACL
ESPAÑOL
LC-46SV50U
LC-42SV50U
LC-32SV40U
LIQUID CRYSTAL TELEVISION
LC-42SV50U
LC-46SV50U
IMPORTANT : Please read this operation manual before starting operating the equipment.
IMPORTANT : Veuillez lire ce mode d’emploi avant de commencer à utilliser l’appareil.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
ENGLISH
LC-46SV50U
LC-42SV50U
LC-32SV40U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
IMPORTANT:
To aid reporting in case of loss or theft, please
record the TV's model and serial numbers in the
space provided. The numbers are located at the
rear of the TV.
Model No.:
Serial No.:
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head
symbol,within an equilateral triangle,is
intended to alert the user to the presence
of uninsulated“dangerous voltage“within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within a triangle
presence of important operating and
maintenance(servicing)instruction in the
literature accompanying the product .
1
IMPORTANT INFORMATION
CAUTION: TO PREVENT ELECTRIC SHOCK,MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s authority to operate
this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect
the unit to other equipment. To prevent electromagnetic interference with electric appliances such
as radios and televisions, use shielded cables and connectors for connections.
This product utilizes fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental
considerations.
For disposal or recycling information, please contact your local authorities, the
Electronic Industries Alliance: www.eiae.org, the lamp recycling organization:
www.lamprecycle.org orSharp at 1-800-BE-SHARP
(For U.S.A. only)
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-46SV50U / LC-42SV50U / LC-32SV40U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help.
Note to CATV system installer: This reminder is provided to call the CATV system installer’s
attention to Article 820 of the National Electrical Code that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
TRADEMARKS
• HDMI,the HDMI logo,and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
• Manufactured under license from Dolby Laboratories.Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
2
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and
many years of trouble-free operation of your product, please read the Important Safety
Instructions carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14) WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
15) Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
16) The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, suchas vases, shall be placed on the apparatus.
Additional Safety Information
17) Power Sources—This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
18) Overloading—Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
19) Object and Liquid Entry—Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the product.
20) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for
service.
3
IMPORTANT SAFETY INSTRUCTIONS
21) Replacement Parts—When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
22) Safety Check—Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating
condition.
23) Wall or ceiling mounting—Use a wall mount bracket that has been listed by an
independent laboratory (such as UL, CSA, ETL).
CAUTION
• These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric
shock do not perform any servicing other than that contained in the operating instructions unless you are
qualified to do so.
• Outdoor Antenna Grounding — If an outside
antenna is connected to the television
equipment, be sure the antenna system is
grounded so as to provide some protection
against voltage surges and built-up static
charges.
Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with
regard to proper grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna discharge unit,
size of grounding conductors, location
of antenna-discharge unit, connection to
grounding electrodes, and requirements for
the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250)
NEC — NATIONAL ELECTRICAL CODE
• Warning statement indicating that Class I apparatus shall be connected to a mains socket outlet
with a protective earthing connection.
• Statement indicating that when the mains plug or appliance coupler shall remain readily operable.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
• Where an all-pole MAINS SWITCH is used as the disconnect device, the location on the
apparatus and the function of the switch shall be described, and the switch shall remain readily
operable.
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product
on an unstable base can cause the product to fall, resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow
the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating and/
or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the
product is dropped or applied with impact. Be careful not to be injured by broken glass pieces
in case the panel breaks.
4
IMPORTANT SAFETY INSTRUCTIONS
• Heat — The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels (LC-46SV50U /
LC-42SV50U) / 1,049,088 pixels (LC-32SV40U) , giving you fine picture details. Occasionally, a
few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
• Lightning — For added protection for this television equipment during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna. This will prevent damage to the equipment due to lightning and
power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them might be fatal.
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fire or shock hazard, do not expose this product to dripping or
splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects in the air
vents or other openings may result in fire or electric shock. Exercise special
caution when using the product around children.
Precautions when transporting the TV
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display.
Be sure to always carry the TV by two people holding it with two hands — one hand on each side
of the TV.
Caring for the Cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main
unit cabinet or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent
diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.
• The cabinet is primarily made of plastic. Avoid using benzene, thinner, and other solvents, as
these may deform the cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period
of time. Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to
peel off.
Caring for the Liquid Crystal panel
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.).
To protect the display panel, do not use a dirty cloth, liquid cleaners,
or a chemical cloth (wet/ dry sheet type cloth, etc.). This may damage
the surface of the display panel.
• Wiping with a hard cloth or using strong force may scratch the surface
of the display panel.
• Use a soft damp cloth to gently wipe the display panel when it is really
dirty. (It may scratch the surface of the display panel when wiped strongly.)
• If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved
cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCDCLOTH-3) packs.
Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.
5
IMPORTANT SAFETY INSTRUCTIONS
CHILD SAFETY
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips
in mind:
THE ISSUE
• The home theater entertainment experience is a growing trend and larger
flat panel displays are popular purchases. However, flat panel displays are
not always supported on the proper stands or installed according to the
manufacturer’s recommendations.
• Flat panel displays that are inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
• The consumer electronics industry is committed to making home
entertainment enjoyable and safe.
TUNE INTO SAFETY
• One size does NOT fit all. Follow the manufacturer’s recommendations for
the safe installation and use of your flat panel display.
• Carefully read and understand all enclosed instructions for proper use of this
product.
• Don’t allow children to climb on or play with furniture and television sets.
• Don’t place flat panel displays on furniture that can easily be used as steps,
such as a chest of drawers.
• Remember that children can become excited while watching a program,
especially on a “larger than life” flat panel display. Care should be taken
to place or install the display where it cannot be pushed, pulled over, or
knocked down.
• Care should be taken to route all cords and cables connected to the flat
panel display so that they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY,
ALWAYS:
• Follow all instructions supplied by the display and wall mount manufacturers.
• If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
• Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact a professional installer.
• A minimum of two people are required for installation. Flat panel displays can be heavy.
Note: CEA is the preeminent trade association promoting growth in
the $161 billion U.S. consumer electronics industry. More than 2,200
companies enjoy the benefits of CEA membership, including legislative
advocacy, market research, technical training and education, industry
promotion and the fostering of business and strategic relationships.
6
QUICK REFERENCE
Supplied Accessories
Make sure the following accessories are provided with the product.
46"
x4
32"
42"
Remote control unit
( X 1)
Page 10
“AAA” size battery
( X 2)
Page 12
Stand ( X 1)
with Screws
Page 7
Operation manual
( X 1)
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual
accessories.
Attaching/Detaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it
from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV
falling over.
1. Put the TV face down on a safe surface that is covered by a soft and smooth cloth.
2. Adjust the TV stand to the bottom of the TV.
3. Fasten the screws by using a cross-head screwdriver (Not supplied).
2
3
3
3
LC-46SV50U
2
2
LC-42SV50U
LC-32SV40U
CAUTION
• Do not push too hard or put excessive pressure to the stand neck to avoid the damages
when you turn the TV for the most comfortable viewing angle.
• To detach the stand, perform the steps in reverse order.
7
QUICK REFERENCE
Detaching the stand neck for wall mounting
CAUTION
• Please use care when disassembling cabinet, stand, and pillar for wall mounting.
• Detach the stand neck in the correct direction.
• Do not remove the stand neck from the TV unless using an optional wall mount bracket
to mount it.
1. Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver.
Remove stand cover from the TV set.
LC-46SV50U / LC-42SV50U
Stand Cover
• To attach the stand neck, perform the steps in reverse order.
• Do not force or overtighten and do not install without stand covers.
8
QUICK REFERENCE
Quick Installation Tips
1. Attach your antenna to the back of the
television. (See page 11.)
2. Connect the AC plug for the television into the
AC outlet.
3. How to turn on the television for the first time.
A) Press POWER on the television.
B) The POWER indicator on the front of the
television lights Green.
POWER indicator
POWER
• Place the TV close to the AC outlet, and keep
the power plug within reach.
• This product must only be connected to a
120V, 60Hz AC outlet.
Connecting it to any other kind of outlet will
damage the product and invalidate the
warranty.
• Speakers cannot be detached from the TV.
4. Insert the batteries into the remote control
unit. (See page 12.)
• TO PREVENT RISK OF ELECTRIC SHOCK,
DO NOT TOUCH UN-INSULATED PARTS
OF ANY CABLES WITH THE AC CORD
CONNECTED.
9
QUICK REFERENCE
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects
between the remote control unit and the remote control sensor may prevent proper operation.
■ Cautions regarding the remote control
unit
• Do not expose the remote control unit to
shock. In addition, do not expose the remote
control unit to liquids, and do not place in an
area with high humidity.
• Do not install or place the remote control unit
under direct sunlight. The heat may cause
deformation of the remote control unit.
• The remote control unit may not work
properly if the remote control sensor on the
TV is under direct sunlight or strong lighting.
In such cases, change the angle of the
lighting or the TV, or operate the remote
control unit closer to the remote control
sensor.
17´ (5 m)
30º
Remote control
sensor
30º
30º
30º
INPUT
2
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
10
Preparation
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types
of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial
cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
1. A 75-ohm system is generally a round cable
with F-type connector that can easily be
attached to a terminal without tools
(Commercially available).
2. A 300-ohm system is a flat “twin-lead” cable
that can be attached to a 75-ohm terminal
through a 300/75-ohm adapter (Commercially
available).
When connecting the RF cable to the TV set, do
not tighten F-type connector with tools. If tools
are used, it may cause damage to your TV set.
(The breaking of internal circuit, etc.)
F-type connector
75-ohm coaxial cable
(round)
300-ohm twin-lead cable (flat)
F-type connector
75-ohm coaxial cable
Connecting Antenna Cable
• Connect the antenna cable to the TV using one of the methods in the illustration as
shown ( 1 , 2 , 3 or 4 ).
1 Cable without a CATV converter
Home Antenna
terminal (75-ohm)
Cable TV lead-In
Coaxial cable
(commercially available)
2 VHF/UHF antenna
Home Antenna
terminal (75-ohm)
75-ohm coaxial cable (round)
Coaxial cable
(commercially available)
3 Combination VHF/UHF antenna
75-ohm coaxial cable (round)
or
300-ohm twin-lead cable (flat)
300/75-ohm adapter
(commercially available)
4 Separate VHF/UHF antenna
VHF
UHF
ANTENNA ANTENNA
300-ohm
twin-lead cable
IN
300-ohm twin-lead cable
or
75-ohm coaxial cable
OUT
Combiner
(commercially available)
To TV antenna terminal
11
Preparation
Installing Batteries in the Remote Control Unit
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1 Open the battery cover.
3 Close the battery cover.
2 Insert two “AAA” size batteries (supplied
with the product).
• Place the batteries with their terminals
corresponding to the ( ) and ( )
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the
instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries come in
contact with skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage
conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries
from it.
• The batteries (batteries installed) shall not be exposed to excessive heat such as sunshine, fire or
the like.
12
Contents
IMPORTANT INFORMATION ..................................................................................................... 1
TRADEMARKS ............................................................................................................................ 2
IMPORTANT SAFETY INSTRUCTIONS ..................................................................................... 3
QUICK REFERENCE ................................................................................................................... 7
Supplied Accessories ............................................................................................................ 7
Attaching/Detaching the Stand .............................................................................................. 7
Detaching the stand neck for wall mounting ........................................................................... 8
Quick Installation Tips ............................................................................................................ 9
Using the Remote Control Unit .............................................................................................. 10
Antennas ............................................................................................................................... 11
Connecting Antenna Cable .................................................................................................... 11
Installing Batteries in the Remote Control Unit ........................................................................ 12
Contents ...................................................................................................................................... 13
Part Names ................................................................................................................................. 14
TV (Front) ............................................................................................................................... 14
TV (Side/Rear) ....................................................................................................................... 14
Remote Control Unit .............................................................................................................. 15
Introduction to Connections ..................................................................................................... 16
Experiencing HD Images ....................................................................................................... 16
Types of Connection ............................................................................................................. 16
Connecting to External Equipment .......................................................................................... 17
Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box ............................. 17
Connecting a Game Console, VCR, Camcorder or Cable/Satellite Set-top Box ..................... 18
Connecting an Audio Amplifier ............................................................................................... 19
Connecting an AV Amplifier ................................................................................................... 19
Connecting a PC ................................................................................................................... 20
Watching TV ................................................................................................................................ 21
Turning On/Off the Power ...................................................................................................... 21
EZ Setup ............................................................................................................................... 21
Direct Button Operation ............................................................................................................ 23
On-Screen Display Menu .......................................................................................................... 26
Menu Items ........................................................................................................................... 26
On-Screen Display Menu Operation ...................................................................................... 27
Menu Operation Button ......................................................................................................... 28
Picture Settings ..................................................................................................................... 28
Audio Settings ....................................................................................................................... 30
Power Control ....................................................................................................................... 30
System Options ..................................................................................................................... 31
Initial Setup ............................................................................................................................ 33
Information ............................................................................................................................ 36
Enjoying Photo/Music/Video Playback .................................................................................... 37
Appendix ..................................................................................................................................... 40
Troubleshooting .................................................................................................................... 40
Specifications ........................................................................................................................ 41
PC Compatibility Chart .......................................................................................................... 43
RS232 Port Specifications ..................................................................................................... 44
Information on the Software License for This Product ............................................................ 45
Legal notices ......................................................................................................................... 46
Calling for Service ...................................................................................................................... 47
LIMITED WARRANTY ................................................................................................................. 47
Dimensional Drawings
• The dimensional drawings for the LCD TV set are shown on the inside back cover.
13
Part Names
TV (Front)
POWER indicator
Remote control sensor
Light sensor
TV (Side/Rear)
*2
*1
HEAD PHONE
Channel
buttons
(CH / )
Volume
buttons
(VOL+ / _)
INPUT 1
terminal (HDMI)
USB
MENU
button
INPUT
button
*1
POWER
button
*1: See pages 17, 18, 19 and 20 for external equipment connection.
*2: See page 16, 21, 23 and 28 for button operations.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
14
Part Names
Remote Control Unit
POWER
16
INPUT
1
2
3
4
5
6
7
8
9
17
0
DIS P LAY F RE E Z E
18
19
20
21
22
23
TV
FLASHBACK
MUT E
+
VOL
ENT
AUDIO
S URROUND
PC
US B
CH
2
3
4
5
6
7
ME NU
8
9
10
ENTER
E X IT
R E TU R N
24
FAV ORIT E CH
25
26
1
A
B
S LE E P
CC
C
D
VIEW MODE AV MODE
11
12
13
14
15
LCDTV
GJ221
• When using the remote control unit, point it at
the TV.
1. INPUT: Select a TV input source.
(See page 23.)
2. 0–9: Set the channel.
3. ENT: Jumps to a channel after selecting with
the 0-9 buttons.
4. FLASHBACK: Press to switch to the
previously tuned channel or external input
mode. Press again to switch back to the
currently tuned channel or external input
mode.
5. AUDIO: Display the MTS/SAP setting menu.
(See page 24.)
6. MUTE: Mute the sound. (See page 23.)
7. CH / : Select the channel. (See page 23.)
8. MENU: Display the menu screen.
9. PC: Direct switch PC source.
10. / / / , ENTER: Select a desired item on
the screen. (See page 28.)
11. RETURN: Return to the previous menu
screen.
12. FAVORITE CH:
A,B,C,D: Selects preset favorite channels in
four different categories. While watching, you
can toggle the selected channels by pressing
A, B, C and D. The every key of the favorite
can select the many channels.
13. AV MODE: Select an adjusted picture
settings. User, Standard, Movie,Game, PC,
Dynamic, Dynamic(Fixed). (See page 24.)
14. VIEW MODE: Select the Picture Mode.
(See page 25.)
15.
: Only for USB.
16. POWER: Switch the power on or enters
standby mode. (See page 21.)
17. • (DOT): (See page 23.)
18. DISPLAY: Display the current channel (or
input source) information on the screen.
19. FREEZE: Set the still image. Press again to
return to normal screen.
20. VOL +/- : Set the volume. (See page 23.)
21. SURROUND: Display the surround setting
menu. (See page 23.)
22. TV: Direct switch TV source.
23. USB: Direct switch USB source.
24. EXIT: Turn off the menu screen.
25. SLEEP: Allows you to set a time when the TV
automatically switches to standby. This display
will disappear after a few seconds, and the
sleep timer automatically starts counting down.
(See page 23.)
26. CC: Display captions during closed-caption
source.(See page 24.)
15
Introduction to Connections
Experiencing HD Images
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get HD programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
• For information on updating to HD programming, ask your cable/satellite service provider.
Types of Connection
Image quality differs depending on the terminal used. To enjoy clearer images, check the output
terminals of your external equipment and use its appropriate terminals for higher quality images.
For connecting the TV to external equipment, use commercially available cables.
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
Image
Quality
Terminal on external
equipment
Terminal
on the TV
Cable
INPUT 1, 2, 3
HD
Quality
HDMI-certified cable
Page 17
Ø 3.5 mm stereo minijack cable
AUDIO
INPUT 1, 2, 3
DVI-HDMI conversion cable
Page 17
DVI OUT
Component video cable(commercially
available)
INPUT 4
Page 18
Audio cable(commercially available)
AV cable (commercially available)
INPUT 4
Page 18
Standard
Quality
Displaying an External Equipment Image Display
To view external source images, select the input source by pressing INPUT on the remote control
unit or on the TV.
1. Press INPUT.
Example
• The CH list screen displays.
2.
Press / to select the input source.
1
Input Source
3
2
• You can also select the input source by
4
5
6
TV
7
8
9
pressing INPUT. Each time INPUT is
INPUT1 HDMI1
0
pressed, the input source toggles.
INPUT2 HDMI2
POWER
INPUT
ENT
DIS P LAY F RE E Z E
+
VOL
TV
AUDIO
FLASHBACK
MUT E
S URROUND
US B
PC
CH
ME NU
INPUT
ENTER
EXIT
16
RETURN
INPUT3 HDMI3
INPUT4 COMP/AV
PC IN
USB
INPUT1
TV
INPUT2
INPUT3
INPUT4
• An image from the selected source
automatically displays.
Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images,
select the input source from INPUT on the remote control unit or on the TV. (See pages 15 and 23.)
For connecting the TV to external equipment, use commercially available cables.
CAUTION
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box
When using HDMI cable (INPUT 1, 2, or 3):
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a
connection for audio and video signals using a single cable. The HDMI terminal supports
high-resolution video input.
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Back and side
panel inputs
HDMI-certified cable
HDMI OUT
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a
component cable and set the equipment to 1080p output.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
When using DVI-HDMI conversion cable (INPUT 1, 2, or 3):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Back and side panel inputs
Ø 3.5 mm stereo minijack cable
DVI-HDMI conversion cable
AUDIO
DVI OUT
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in
addition to connecting a DVI-HDMI conversion cable to the INPUT 1,2,3 (HDMI) terminal, connect a
Ø 3.5 mm stereo minijack cable to the AUDIO PC/HDMI terminal.
17
Connecting to External Equipment
When using Component cable (INPUT 4):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Audio cable
Component video cable
PR (Red)
PB (Blue)
Y (Green)
AUDIO-L (White)
AUDIO-R (Red)
COMPONENT OUT
Back panel
horizontal inputs
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a
component cable and set the equipment to 1080p output.
• See page 17 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI
terminal.
Connecting a Game Console, VCR, Camcorder or Cable/Satellite Set-top Box
When using Composite cable (INPUT 4):
• Game console
• VCR
• Camcorder
• Cable/Satellite set-top box
18
VIDEO (Yellow)
AUDIO-L (White)
AUDIO-R (Red)
VIDEO (Yellow)
AUDIO-L (White)
AUDIO-R (Red)
Connecting to External Equipment
Connecting an Audio Amplifier
When using coaxial cable:
It is possible to output audio through the DIGITAL AUDIO terminal. PCM audio outputs from the
terminal.
Side Panel
Vertical Output
Coaxial Cable
OPTICAL
DIGITAL AUDIO INPUT
• Digital Audio output is not available when using an HDMI input.
Connecting an AV Amplifier
Back and side
panel inputs
HD Cable/Satellite set-top box
HDMI-certified cable
HDMI OUT
HDMI
IN
HDMI
OUT
• If the image is not in sync with the audio, check the settings of the connected surround system.
• Letting the TV output the audio to an AV amplifier.
19
Connecting to External Equipment
Connecting a PC
Refer to page 43 for a list of PC signals compatible with the TV.
When using HDMI cable (INPUT 1, 2 or 3):
Back and side
panel inputs
HDMI-certified cable
HDMI OUT
• The HDMI terminals only support digital signal.
When using DVI-HDMI conversion cable (INPUT 1,2,3):
Back and side panel inputs
Ø 3.5 mm stereo minijack cable
AUDIO
DVI-HDMI conversion cable
DVI OUT
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in
addition to connecting a DVI-HDMI conversion cable to the INPUT 1,2,3 (HDMI) terminal, connect a Ø 3.5 mm
stereo minijack cable to the AUDIO PC/HDMI terminal.
When using analog RGB cable (PC IN):
Back panel
vertical inputs
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
Ø 3.5 mm stereo minijack cable
RGB
AUDIO
• When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of PC IN.
20
Watching TV
Turning On/Off the Power
Press POWER on the TV, or POWER on the remote control
unit to turn the power on.
• POWER indicator: Power on, Green; Power off, red.
Press POWER on the TV, or POWER on the remote control
unit again to turn the power off.
• The TV enters standby and the image on the screen
disappears.
POWER
INPUT
1
2
3
POWER
• If you are not going to use this TV for a long period of time, be sure to
remove the AC cord from the AC outlet.
• Small amount of electric power is still consumed even when the TV is
turned off.
• If there is no signal input for 15 minutes, the power will turn to standby
mode automatically.
EZ Setup
When you turn on the TV for the first time, the
Initial Setup will guide you through the setup
process. Perform the following steps before
you press POWER on the remote control unit.
1. Insert the batteries into the remote control
unit. (See page 12.)
2. Connect the antenna cable to the TV. (See
page 11.)
3. Plug in the AC cord to the AC outlet. (See
page 9.)
TV
US B
PC
2. Language setting
• Select the OSD menu language from
English, Spanish, or French.
• Press / to select the desired
language listed on the screen, and then
press the to the next step.
TV
Language
Set the on-screen display language
Language
English
Français
ME NU
Español
Select
Enter
Enter
Return
Back
EXIT
Exit
TV Location
Select "Home" or "Store" for the location where
you plan to install the TV.
ENTER
E X IT
EZ Setup
R E TU R N
3. Location setting
1. Initial Setup
• The Initial Setup screen display at the first
use. Press ENTER to start the EZ setup.
TV
EZ Setup
• Press / to select “Home” or “Store”
and press to the next step.
TV
TV Location
EZ Setup
Select where the TV will be placed.
The picture will be optimized for
that location.
Welcome
Home
Store
Thank You for Your Purchase of our SHARP Liquid Crystal Television
Please press [Enter] to start the Wizard.
Select
Enter
Enter
Enter
Return
Back
EXIT
Exit
Enter
21
Watching TV
Home: “Power Saving” is set to "On", and AV MODE
is set to "STANDARD".
Store: “Power Saving” is set to "Off" and AV MODE is
set to "DYNAMIC (Fixed)". Picture Reset and Feature
Demo can be set.
4. Air/Cable(Antenna setting)
• Make sure what kind of connection is
made with your TV when selecting “Air”
or “Cable”.
• Press / to select “Air” or “Cable” and
press to the next step.
TV
EZ Setup
Air/Cable
7. Completed
After setting complete, the screen will
show "EZ Setup Completed", press
ENTER to finish the EZ Setup. The TV will
then switch to the first channel found.
TV
EZ Setup
Completed
EZ Setup Completed
Enter
Exit
Return
Back
Selecting Air/Cable channels
Air
• Auto programming may take 20+ minutes to
complete. Please wait until you see the Auto
programming complete message.
Cable
Select
Enter
Enter
Return
Back
EXIT
Exit
CH Search (Channel search)
Channel auto search makes the TV look for all
channels viewable in the set area.
5. When "Air" or "Cable" is selected
in Antenna setting:
Press / to select "Start", and then
press ENTER.
TV
EZ Setup
CH Search
Searching receivable channels
Start
Cancel
Select
Enter
Enter
Return
Back
EXIT
Exit
6. Start channel searching
• Wait until the channel scan to complete.
• If you press EXIT, the process will return
to the previous step.
• If you skip this step, the channel search
can be performed in the TV Menu. (See
page 34.)
TV
EZ Setup
CH Search
Searching receivable channels.
Now tunning Channels automatically..
Analog: 0
Digital: 0
22%
EXIT
22
Cancel
Direct Button Operation
MUTE
POWER
INPUT
Mutes the current sound output.
Press MUTE.
ENTER
1
2
3
4
5
6
7
8
9
0
ENT
DIS P LAY F RE E Z E
+
VOL
TV
AUDIO
E X IT
R E TU R N
FAV ORIT E CH
A
B
S LE E P
CC
C
D
VIEW MODE AV MODE
• Mute can be canceled by using the method below.
- Mute will be canceled if you press VOL + / - or
MUTE.
FLASHBACK
MUT E
S URROUND
US B
PC
CH
ME NU
SLEEP
LCDTV
GJ221
Changing Channels
You can change channels by pressing CH
or 0-9, or • (DOT).
Examples:
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5
ENT.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1
1
5
ENT.
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2
2
• (DOT)
1
/
ENT.
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
Changing Volume
You can change the volume by pressing
VOL / on the TV or on the remote control
unit.
• To increase the volume, press VOL .
• To decrease the volume, press VOL .
INPUT
To view external source images, select the input
source using INPUT on the remote control unit
or INPUT on the TV.
1. Press INPUT.
• A list of selectable sources appears.
2. Press INPUT again to select the input
source.
• An image from the selected source
automatically displays.
• Each time INPUT is pressed, the input
source toggles.
• If you press ▲/▼ to select the input
source, press ENTER to confirm your
selection.
• See page 17-20 for external equipment connection.
Allows you to set a time when the TV
automatically switches to standby.
Press SLEEP.
• The remaining time displays when the
sleep timer has been set.
• Each time you press SLEEP, the remaining
time switches as shown below.
Off 30 60 90 120
• When set, the time automatically starts
counting down.
• If you want to adjust the sleep timer, you
can press SLEEP twice then change the
time setting.
• Select "Off" by pressing SLEEP to cancel the sleep
timer.
• The TV will enter standby mode (power indicator
lights red) when the remaining time reaches zero.
FLASHBACK
Press FLASHBACK to switch to the previously
tuned channel or input.
• Press FLASHBACK again to switch back
to the currently tuned channel or input.
SURROUND
The surround function produces Surround effect
from the speakers. Each time you press
SURROUND, the mode changes between On
and Off.
• On: Makes it possible to enjoy natural,
realistic surround sound.
• Off: Outputs the normal sound.
• You can have the same settings by choosing
“Surround” on the menu items. (See page 30.)
FREEZE
Allows you to capture and freeze a moving
image that you are watching.
Press FREEZE.
• A moving image is captured.
• Press FREEZE again to cancel the
function.
23
Direct Button Operation
AV MODE
AV MODE gives you several viewing options to
choose from to best match the surrounding
environment of the TV, which can vary due to
factors like room brightness, type of program
watched or the type of image input from
external equipment.
Press AV MODE. Current AV MODE displays.
• Press AV MODE again before the mode
displayed on the screen disappears.
AUDIO
■ MTS/SAP stereo mode
The TV has a feature that allows reception of
sound other than the main audio for the
program. This feature is called Multi-channel
Television Sound (MTS). The TV with MTS can
receive mono sound, stereo sound and
Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another
language or something completely different like
weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts when available.
• Stereo broadcasts: View programs like live
sporting events, shows and concerts in
dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in
either MAIN or SAP sound.
MAIN sound: The normal program soundtrack
(either in mono or stereo).
SAP sound: Listen to a second language,
supplementary commentary or other information.
(SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching
to fixed mono-sound mode.
You can change MTS as shown below to match the
television broadcast signal.
Press AUDIO to toggle between audio modes.
Examples: when receiving MTS and SAP
MAIN + SAP mode: MAIN
SAP
MONO mode: MONO
■ Digital broadcasting audio mode
The types of audio transmitted in a digital
broadcast include SURROUND as well as
MONO and STEREO. In addition, it is possible
for multiple audio tracks to accompany a single
video track.
Press MTS/SAP to toggle between audio
modes.
Example: when receiving Digital broadcasting
STEREO (Audio1)
STEREO (Audio2)
SURROUND (Audio3)
24
• MTS only operates while in TV mode.
Closed Captions (CC)
Your TV is equipped with an internal Closed
Caption decoder. It allows you to view
conversations, narration and sound effects as
subtitles on your TV. Closed Captions are
available on some TV programs and on some
VHS home video tapes at the discretion of the
program provider.
Digital Closed Caption service is a new caption
service available only on digital TV programs
(also at the discretion of the service provider). It
is a more flexible system than the original
Closed Caption system, because it allows for a
variety of caption sizes and font styles. When
the Digital Closed Caption service is in use, it
will be indicated by the appearance of a 3-letter
abbreviation that also indicates the language of
the Digital Closed Captions: ENG (English), SPA
(Spanish), FRA (French) or other language
codes.
Not all programs and VHS videotapes offer
closed captions.
In the Closed Caption system, there can be
more than one caption service provided. Each
is identified by its own number. The “CC1” to
“CC4” services display subtitles of TV programs
superimposed over the program's picture.
In the Closed Caption system, the “TEXT1” to
“TEXT4” services display text that is unrelated
to the program being viewed (e.g., weather or
news). These services are also superimposed
over the program currently being viewed.
1. Press CC.
• This will display the current Closed Caption
information. Press CC to turn the Closed
Caption on or off.
Example:
Analog:
CC1
CC2
CC3
-TT4
Digital:
CC1 CC2 CC3
--
CS6
CS5
CC4
TT1
TT3
CC4
CS4
TT2
TT1
TT2
CS3
TT3
CS2
TT4
CS1
• Caption Display will not work when viewing a 480i,
480p, 720p, 1080i or 1080p input via the
COMPONENT: Y-PbPr or HDMI inputs.
• Closed Captions availability and content depends
on the broadcaster. Closed Caption are available
when the Closed Caption icon is displayed on
screen.
• Closed Captions and Digital Captions availability and
content depends on the broadcaster. Closed
Caption are available when the Closed Caption icon
is displayed on screen.
Direct Button Operation
VIEW MODE
You can select the screen size.
1 Press VIEW MODE.
• The View Mode menu displays.
• The menu lists the View Mode options selectable for the type of video signal currently being
received.
2 Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on
the menu.
• You can sequentially select a View Mode that has its own aspect ratio.
For 4:3 programs
Example: Screen size images
Normal
Suitable for viewing
conventional 4:3 programs in
their normal format.
S.Stretch (Smart stretch)
Suitable for stretching 4:3
programs to fill the screen.
Zoom
Stretch
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
This mode is useful for 1.78:1
DVDs. When viewing 1.85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.
For HD programs
Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show
very thin black bands at the top and bottom of the screen.
Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the
same number of pixels on the screen.
Full Screen(720p only): You can select “Full Screen” only when receiving a 720p signal.
S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to fill the screen.
Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.
• When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer
portions of the screen, Please change view mode to correct this.
For PC input mode
• Connect the PC before making adjustments.
• Selectable screen size may vary with input signal type.
Example: Screen size images
Input signal
4:3
Normal
Keeps the original
aspect ratio in a full
screen display.
Cinema
For viewing
widescreen
programs. The top
and bottom of the
image is cropped.
Input signal
Normal
Dot by Dot
16:9
An image fully fills the
screen.
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
Full Screen
Dot by Dot
An image fully fills the
screen.
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
25
On-Screen Display Menu
Menu Items
For TV Mode
Picture Settings ....................................................28
Initial Setup ...........................................................33
AV MODE (Changing Pic.Quality) .............................29
OPC ........................................................................29
Backlight .................................................................28
Contrast ..................................................................28
Brightness ...............................................................28
Color .......................................................................28
Tint .........................................................................28
Sharpness ...............................................................28
Advanced ...............................................................29
Color Temp. (Color Temperature) .....................29
Active Contrast .................................................29
Dl Film Mode ....................................................29
Digital Noise Reduction ....................................29
EZ Setup .................................................................33
Broadcasting Setup ................................................34
CH Setup .........................................................34
Favorite CH (Favorite Channel Setting) .............34
Language ................................................................34
Individual Setup .......................................................34
Secret No. .......................................................34
Parental CTRL (Parental Control Setting) ..........34
V-Chip .......................................................35
V-Chip(DTV Only) .......................................34
Status ........................................................34
Reset ......................................................................34
Information ...........................................................36
Audio Settings ......................................................30
Identification ............................................................36
Treble .....................................................................30
Bass .......................................................................30
Balance ..................................................................30
Surround .................................................................30
Power Control ......................................................30
No Signal Off ...........................................................30
Power Saving ..........................................................30
System Options ....................................................31
View Option .............................................................31
View Mode .......................................................31
Freeze ..............................................................31
Change Audio ..................................................31
MTS ...........................................................31
Audio Language .........................................31
Change CC ......................................................31
Analog Closed Caption ...............................32
Digital Closed Caption ................................32
Input Terminal Setting ..............................................32
Audio Setup .....................................................32
PC Input ...........................................................32
Auto Sync. (for Analog PC Input Mode Only) ....32
Fine Sync. ..................................................32
Audio Select .....................................................32
HDMI Setup .....................................................33
Speaker ...........................................................33
Caption Setup .........................................................33
Connecting a USB Memory Device/
USB Hard Drive ....................................................37
Select the Files to Play Back ..............................37
Playing Back Files on a USB Memory Device ...37
Photo Mode ............................................................37
Viewing Thumbnails .........................................37
Viewing Individual Photos .................................38
Slide Show ......................................................38
Music Mode ............................................................38
Video Mode .............................................................39
USB Device Compatibility ........................................39
• Some menu items may not be displayed depending on the selected input source.
26
On-Screen Display Menu
On-Screen Display Menu Operation
Example
Example
System
Options
Select Menu
Initial
Setup
Select
ENTER
Picture
Settings
Information
Enter
RETURN
Exit
Menu
Picture Settings
Adjust
STANDARD
AV MODE
OPC
[STANDARD]
[On]
Initial
Setup
Select
ENTER
Picture
Settings
Information
Enter
RETURN
Back
STANDARD
AV MODE
OPC
Backlight
Contrast
Contrast
Brightness
Brightness
Color
Color
Tint
Tint
Sharpness
Sharpness
Advanced
Advanced
Reset
Reset
[
[
[
[
[
82]
51]
50]
50]
0]
10]
1. Press MENU to display the MENU screen.
2. 1 Press / to select the desired menu.
2 Press / to select a specific
adjustment item, and then press ENTER.
• Additional related adjustment items may be
displayed. Press / to select the desired
item.
3 Adjust the item while referring to the
• Operations vary depending on the function
or item. Refer to the guide display
corresponding to the menu setting screen
for button operations.
3. Press MENU to exit.
Menu
Picture Settings
Backlight
[
guide display.
System
Options
[
[
[
[
[
[
[STANDARD]
[On]
82]
51
50]
50]
0]
10]
1 Guide display
• This indicates the buttons that can be operated
on the displayed screen. The guide display varies
depending on the menu setting screen.
• The operations for some selected items may be
displayed in the operational guide bar at the
bottom of the screen.
2 Item displayed in blue
• This indicates the item currently selected.
• Press / to go to the adjustment screen for
this item.
3 Item in brackets
• This indicates the current setting for the item.
4 Item displayed in gray
• This indicates that the item can be selected.
5 Item displayed in black
• This indicates that the item cannot be selected.
There are various reasons why the items cannot
be selected, but the main reasons are as follows:
—Nothing is connected to the selected input
terminal.
—The function is not compatible with the current
input signal.
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others
cropped) and may vary slightly from the actual screens.
• The order of explanations for each menu item in the following pages is not necessarily in
accordance with the alignment of the items on the screen.
27
On-Screen Display Menu
Menu Operation Button
Using the remote control
Use the following buttons on the remote control
to operate the menu.
TV
US B
PC
Picture Settings
Adjusts the picture to your preference with the
following picture settings.
Example
ME NU
Picture
Settings
Picture Settings
AV MODE
ENTER
OPC
E X IT
R E TU R N
Menu
STANDARD
TV
[On]
80]
Contrast
[
Press to open or close the menu
screen.
◄/►: Press to select a desired item on
the screen or adjust a selected
item.
/▼/▲
ENTER:
Press to go to the next step or
complete the setting.
RETURN:
Press to return to the previous
step.
Using the control panel of the main unit
You can also operate the menu with the control
panel of the main unit.
Button operations on the control panel
correspond to the ones on the remote control
as shown below.
CH
/ : Cursor / on the remote
control.
VOL / : Cursor / on the remote
control.
MENU: MENU on the remote
control or EXIT on the
remote control while OSD
menu is on.
INPUT: ENTER on the remote
control.
ME NU
Backlight
[
MENU :
PC
US B
[STANDARD]
ENTER
50]
Brightness
[
EXIT
50]
RETURN
Color
[
50]
FAV ORIT E CH
Tint
[
Sharpness
[
A
B
S LE E P
CC
0]
C
D
VIEW MODE AV MODE
10]
Advanced
Reset
1. Press MENU to display the MENU screen,
and then press ◄/► to select "Picture
Settings" and press ENTER or ▼ to enter it.
2. Press ▲/▼ to select a specific adjustment
item and press ENTER or ► to enter the
setting.
3. Press ◄/► to adjust the setting.
4. Press MENU to exit.
Selected item
button
Backlight
The screen
dims
button
The screen
brightens
Contrast
For less
contrast
For less
brightness
For more
contrast
For more
brightness
For less color
intensity
Skin tones
become reddish
For less
sharpness
For more color
intensity
Skin tones
become greenish
For more
sharpness
Brightness
Color
Tint
Sharpness
• Backlight control is disabled when OPC is “On”.
28
On-Screen Display Menu
AV MODE (Changing Pic.Quality)
The audio and video settings can be changed
to suit the program or input content being
watched.
Select from the following AV modes.
USER/STANDARD/MOVIE/GAME/PC/
DYNAMIC/DYNAMIC (Fixed)
• You can select AV MODE by pressing AV MODE
on the remote control unit. See page 24 for details
of AV MODE settings.
OPC
Automatically adjusts the brightness of the
screen.
Off: The brightness is fixed at the value set in
"Backlight".
On: Automatically adjusts.
• When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically
adjusts the backlight brightness. Make sure nothing
obstructs the OPC sensor, which could affect its
ability to sense surrounding light.
Advanced
This TV provides various advanced functions
for optimizing the picture quality.
• For resetting all adjustment items to the factory
preset values, press / to select "Reset", and
then press ENTER.
Color Temp. (Color Temperature)
For a better white balance, use color
temperature correction.
Warm:
White with reddish tone
Standard:
Cool:
• For resetting all adjustment items to the factory
preset values, press / to select "Reset", and
then press ENTER.
Active Contrast
VGA
Automatically adjusts the image contrast
according to the scene.
On: Automatically adjusts the image
contrast.
Off: No adjustment.
Dl Film Mode
VGA
Automatically detects a film-based source
(originally encoded at 24 frames/second),
analyzes it then recreates each still film frame
for high-definition picture quality.
Auto: Detects, analyzes, converts film
source.
Off: Normal viewing mode.
• “DI Film Mode" does not function depending on
input signal type.
• “Auto" does not function when channel display
shows an input signal resolution of 480p, 720p, or
1080p.
• “DI Film Mode" is not available during PC format
input.
Digital Noise Reduction
VGA
Produces a clearer video image.
Auto: Automatically adjusts the level of
noise reduction.
High/Middle/Low: Select a desired level
for viewing a clearer video image.
Off: No adjustment.
• "Digital Noise Reduction" is not available when you
set PC format is being input.
White with bluish tone
User:
White balance can be adjusted manually through
the R/G/B Gain between a maximum of 255 and a
minimum of 0 for each color temperature.
29
On-Screen Display Menu
Power Control
Audio Settings
You can adjust the sound quality to your
preference with the following settings.
Example
Audio
Settings
Power control setting allows you to save energy.
Example
TV
Power
Control
Menu
TV
Audio Settings
US B
PC
ME NU
STANDARD
[ 50]
[ 50]
EXIT
RETURN
[Off]
Reset
1. Press MENU to display the MENU screen,
and then press / to select "Audio
Settings".
2. Press / to select a specific adjustment
item.
• Select "Surround" and then press /
to set.
3. Press / (or / ) to select the desired
setting, and then press ENTER.
4. Press MENU to exit.
Selected item
button
Treble
For weaker
treble
Bass
For weaker
bass
Balance
Decrease audio
from the right
speaker
button
For stronger
treble
For stronger
bass
Decrease audio
from the left
speaker
• For resetting Audio adjustment items to the factory
preset values, press / to select "Reset", press
ENTER, press / to select "Yes", and then press
ENTER.
Surround
The surround function produces Surround
effect from the speakers.
On: Makes it possible to enjoy natural,
realistic surround sound.
Off: Outputs the normal sound.
• For some discs, setup may be required on your
DVD/BD player. In this case, please refer to the
operation manual of your DVD/BD player.
30
RETURN
ENTER
0]
Surround
ENTER
EXIT
[On]
Balance
[
ME NU
[Enable]
Power Saving
Bass
PC
Power Control
No Signal Off
Treble
US B
Menu
1. Press MENU to display the MENU screen,
and then press / to select "Power
Control".
2. Press / to select a specific adjustment
item, and then press ENTER.
3. Press / ( or / ) to select the desired
setting, and then press ENTER.
4. Press MENU to exit.
No Signal Off
This function allows the TV to automatically shut
the power down when there is no signal
received.
Enable: The power will automatically shut
down if there is no signal for 15 minutes.
Disable: This function does not work.
Power Saving
This function allows you to set the Power
Saving level in order to decrease the power
consumption and increase the backlight
lifespan.
On: Optimizes power reduction based upon
video content.
Off: This function does not work.
• "Power Saving" does not function when you set AV
MODE to DYNAMIC (Fixed)".
• You cannot select a different Power Saving item for
each AV MODE.
On-Screen Display Menu
System Options
Change Audio
MTS
Example
DIS P LAY F RE E Z E
System
Options
Menu
System Options
TV
FLASHBACK
MUT E
+
VOL
AUDIO
S URROUND
PC
US B
CH
ME NU
View Option
Input Terminal Setting
ENTER
Caption Setup
E X IT
R E TU R N
FAV ORIT E CH
A
B
S LE E P
CC
C
D
VIEW MODE AV MODE
1. Press MENU to display the MENU screen,
and then press / to select "System
Options".
2. Press / to select a specific adjustment
item and then press ENTER.
3. Press / (or / ) to select the desired
setting, and then press ENTER.
4. Press MENU to exit.
View Option
These functions are useful for adjusting the
audio and video settings. The View Option
functions can be operated with the remote
control unit.
View Mode
This function changes the screen size.
Select "View Option" on the menu to display
the View Mode menu screen.
The View Mode menu varies depending on the
input source.
• You can select View Mode by pressing VIEW
MODE on the remote control unit.
—See page 25 for adjusting the video being input from
a TV, PC, other audiovisual equipment, USB-Video.
Freeze
Allows you to capture and freeze a moving
image that you are watching.
• You can select Freeze by pressing FREEZE on the
remote control unit. See page 23 for details of
Freeze function.
The TV has a feature that allows reception of
sound other than the main audio for the program.
This feature is called Multi-channel Television
Sound (MTS). The TV with MTS can receive
mono sound, stereo sound and Secondary
Audio Programs (SAP). The SAP feature allows a
TV station to broadcast other information, which
could be audio in another language or something
completely different like weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts: View programs like live
sporting events, shows and concerts in dynamic
stereo sound.
• SAP broadcasts: Receive TV broadcasts in either
MAIN or SAP sound.
MAIN sound: The normal program soundtrack
(either in mono or stereo).
SAP sound: Listen to a second language,
supplementary commentary or other information.
(SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to
fixed mono-sound mode.
You can change MTS as shown below to match the
television broadcast signal.
Press ENTER to toggle between audio modes.
Examples: when receiving MTS and SAP
STEREO mode: STEREO
MONO
STEREO + SAP mode: ST(SAP) SAP(ST) MONO
MAIN + SAP mode: MAIN
SAP
MONO mode: MONO
Digital broadcasting audio mode
The types of audio transmitted in a digital broadcast
include SURROUND as well as MONO and STEREO.
In addition,it is possible for multiple audio tracks to
accompany a single video track.
Press ENTER to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO (Audio 1)
STEREO (Audio 2)
SURROUND (Audio 3)
• MTS only operates while in TV mode.
Audio Language
Gives you the possibility to swap between main
and alternative language, when it is available in
digital channel.
Change CC
Allows you to change the Closed Caption
display. Select "Change CC" on the menu to
display the Closed Caption information.
• You can change Closed Caption by pressing CC on
the remote control unit. See page 24 for details of
Closed Caption function.
31
On-Screen Display Menu
Analog Closed Caption
This allows you to select the Closed Captions
service levels of analog broadcasting to be
displayed. Closed captioning allows you to read
the voice content of television programs on the
TV screen. Designed to help the hearing
impaired, this feature uses on-screen “text
boxes“ to show dialogues and conversations
while the TV program is in progress. Captions
will appear on the screen during captioned
broadcasts.
• CC1, 2, 3, or 4
Dialogues (and descriptions) for the action on the
captioned TV program shows on screen. Usually
CC1 is the most used. CC2 can be used for
alternate languages if they are being transmitted.
• TEXT1, 2, 3, or 4
Often used for channel guide, schedules, bulletin
board information for Closed captions programs,
news, weather information, or stock market reports.
Not all Caption services are necessarily being used
by a TV channel during the transmission of a Closed
Caption program.
Digital Closed Caption
This allows you to configure the way you
choose to view digital captioning. Select one of
the digital service channels made available by
the caption provider. There are six standard
services. Service 1 is designated as the Primary
Caption Service. This service contains the
verbatim, or near-verbatim captions for the
primary language being spoken in the
accompanying program audio. Service 2 is
designated as the Secondary Language Service.
This service contains captions in a secondary
language, which is a translation of the captions
in the primary Caption Service. The other
service sub channels are not pre-assigned. It is
up to the discretion of the individual caption
provider to utilize the remaining service
channels.
Input Terminal Setting
Audio Setup
You can output digital audio to an AV amplifier
or similar device whose DIGITAL AUDIO INPUT
terminal is connected to the DIGITAL AUDIO
OUTPUT terminal on the TV. Please select an
audio output format compatible with the audio
format of the program you are watching and
the equipment connected.
PCM: The optical output terminal outputs
audio signal in PCM form. If your digital
audio system does not support Dolby
Digital, select "PCM".
32
Dolby Digital: The optical output terminal
outputs audio signal in Dolby Digital form. It
reproduces sound from surround program
of digital.
Off: Disables digital audio output.
PC Input
Auto Sync. (for Analog PC Input Mode Only)
For automatically adjusting the PC image.
The Auto Sync is only available when the input
source is PC and your TV is receiving a
computer signal. Select Auto Sync. for
adjusting the settings automatically.
• Be sure to connect the PC to the TV and switch it
on before starting "Auto Sync.".
Fine Sync.
Ordinarily you can easily adjust the picture as
necessary to change image position using
"Auto Sync.". In some cases, however, manual
adjustment is needed to optimize the image.
H-Pos.: Centers the image by moving it to
the left or right.
V-Pos.: Centers the image by moving it up
or down.
Clock: Adjust when the image flickers with
vertical stripes.
Phase: Adjust when characters have low
contrast or when the image flickers.
• The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrical.
• The screen position variable ranges depend on the
View Mode or the signal type. The ranges can be
seen on the position-setting screen.
Audio Select
This function sets the terminal to output the
computer audio.
The adjustment items vary depending on the
input source. Select the input source
corresponding to the terminal connected to the
PC and then adjust the desired item.
On-Screen Display Menu
PC IN
Video: Select this when the TV and PC are
connected using an analog RGB cable and the
audio is not input.
Video+Audio: Select this when the TV and PC
are connected using an analog RGB cable and
the audio is input via a Ø 3.5 mm stereo minijack.
HDMI IN
Auto: Audio path is set to HDMI or PC line in
automatically.
HDMI(Digital): Select this when the TV and PC
are connected using an HDMI-certified cable and
audio is input via the same cable.
HDMI+Analog: Select this when the TV and PC
are connected using a DVI-HDMI conversion
cable and the audio is input via a Ø 3.5 mm
stereo minijack.
• When "Audio Select" is set to "HDMI(Digital)", sound
will not be produced if you use only an
HDMI-certified cable to connect HDMI-compatible
equipment. To produce sound, you should make an
analog audio connection.
• If you want to connect HDMI-compatible equipment
using only an HDMI-certifi ed cable, set "Audio
Select" to "HDMI(Digital)".
HDMI Setup
HDMI Mode only shows and is available when
HDMI device is connected. Select from Auto,
Graphic or Video.
Auto: The HDMI input timing is set to Video mode or
Graphic mode automatically.
Graphic: HDMI input timing set to Graphic mode (PC).
The image is full scan.
Video: HDMI input timing set to Video mode. The
image is over scan.
• HDMI Mode is only workable for HDMI Video &
Progressive timing as followed: 1920x1080p,
1280x720p, 720x480p, 720x576p.
Speaker
Choose to turn on or off the TV internal speaker.
The audio output signals will not be turned off
even though the TV speaker is off. The default
setting is On.
Caption Setup
This function allows you to adjust the closed
caption screen appearance to suit your
preference. You can adjust 8 items:
• Caption Style: Set to As Default or Custom mode.
If Custom mode is selected, user can modify the
detail styles described below. The setting result will
be shown immediately on the bottom of the
submenu OSD.
Note: This feature is only available in Digital TV
(ATSC) mode.
• Caption Size: Selects this option to choose a
caption display size according to your own
preference. Select “Small”, “standard”, or “Large”.
• Foreground Color: Choose the caption display
text color.
• Foreground Opacity: Select the text opacity.
• Background Color: Choose one of the background
color.
• Background Opacity: Choose one of the
background opacity options.
• Window Color: Choose one of the display
windows color.
• Window Opacity: Select one of the display window
opacity options.
Initial Setup
Example
Initial
Setup
Menu
TV
Initial Setup
US B
PC
ME NU
EZ Setup
Broadcasting Setup
Language
Individual Setup
ENTER
[English]
EXIT
RETURN
Reset
1. Press MENU to display the MENU screen,
and then press / to select "Initial Setup".
2. Press / to select a specific adjustment
item, and then press ENTER.
• When you select Individual Setup, you can
enter the 4-digit secret number here. See
page 34 for setting a secret number.
3. Press / (or / ) to select the desired
setting, and then press ENTER.
4. Press MENU to exit.
EZ Setup
You can run EZ Setup again, even after setting
up the preset channels.
Language: Select from among 3 languages
(English, French and Spanish).
TV Location: Select "Home" or "Store" for the
location where you plan to install the TV.
Home: “Power Saving” is set to "On", and AV MODE is set
to "STANDARD".
Store: “Power Saving” is set to "Off" and AV MODE is set
to "DYNAMIC (Fixed)". Picture Reset and Feature Demo
can be set.
33
On-Screen Display Menu
Air/Cable: Make sure what kind of connection is
made with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV
look for all channels viewable in the set area.
• If "Cable" is selected for Antenna setting, scrambled
channels are removed after the Channel search has
been completed.
Completed: The settings confirmation screen is
displayed. Confirm the information displayed on
the screen.
• See EZ Setup on pages 21 to 22 for setting each
item.
• If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
Broadcasting Setup
CH Setup
If Initial Installation does not memorize all the
channels in your region, follow the instructions
below to manually memorize the channels.
Air/Cable: Make sure what kind of connection
is made with your TV when selecting "Air" or
"Cable".
CH Search: Channel auto search makes the
TV look for all channels viewable in the set area.
CH Memory: You can select the channels to
skip in each ANALOG (Air), ANALOG (Cable),
DIGITAL (Air) and DIGITAL (Cable).
• If no channel is found, confirm the type of connection
made with your TV and try channel search again.
• If you press ENTER after CH search finish, CH
search is re-start.
Favorite CH (Favorite Channel Setting)
This function allows you to program 4 favorite
channels, in 4 different categories. By setting
the favorite channels in advance, you can select
your favorite channels easily.
To register your favorite channel:
1. Press MENU on the remote control and select
“Initial Setup”/“Broadcasting Setup”/
“Favorite CH”.
2. Press / to select the category that you want to
store your favorite channel.
3. Press / to select your desired channel and
press ENTER button to confirm.
To delete your favorite channel
1. Press MENU on the remote control and select
“Initial Setup”/“Broadcasting Setup”/
“Favorite CH”.
2. Press / to select “All data clear” and press
ENTER to start clearing all favorite channel data.
34
• While watching, you can toggle the selected
channels by pressing the A,B,C, and D button on
the remote control.
Language
You can also select a language from the Initial
Setup menu. Select from among 3 languages:
English, French and Spanish.
Reset
If complex adjustments are made and the
settings cannot be restored to normal, you can
reset the settings to the factory preset values.
•
•
•
•
The Channel Setup settings will not be changed.
The Language settings will not be changed.
The Secret number settings will not be changed.
The TV Location settings will not be changed.
Individual Setup
Before entering the Individual Setup, user has to
key in the Secret No. first.Enter a 4-digit Secret
No. with the number buttons on the remote
control. The default Secret No. is 0000.
Secret No.
Allows you to use a secret number to protect
certain settings from being accidentally changed.
New Secret No. :
Enter a 4-digit Secret No. with the number
buttons on the remote control to change you
secret No. .
Confirm Secret No. :
Enter you new 4-digit Secret No. again to
confirm.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place.
Parental CTRL (Parental Control Setting)
Status
Used to enable or disable the parental control
function. This function will not be selectable
from the menu if you do not first configure your
secret number.
Yes: Enables Parental CTRL.
No: Disables Parental CTRL.
V-Chip(DTV Only)
The “V-Chip (DTV Only)” will only be selectable
when a new rating system can be downloaded
via digita broadcasting in the U.S.
On-Screen Display Menu
TV Parental Guidelines
V-Chip
V-CHIP is an electronic filtering device built into
your TV. This tool gives parents a great degree
of control over broadcasts accessed by their
children. It allows parents to select programs
judged suitable for child viewing while blocking
ones judged not suitable. It does so
automatically once you activate the V-CHIP
feature in your TV. "V-Chip" and "Status" will
not be selectable from the menu if you do not
first configure your secret number.
• The U.S. has two rating systems for viewing content:
TV Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with
the V-CHIP to help parents screen out inappropriate
television shows from their children.
• Movie ratings are used for original movies rated by
the Motion Picture Association of America (MPAA)
as watched on cable TV and not edited for
television. The V-CHIP can also be set to block
MPAA-rated movies.
Example
MPAA
TV Guidelines
TV-Y
Can. English Ratings
TV-Y7
Can. French Ratings
TV-G
L
TV-PG
S
D
TV-14
V
TV-MA
FV
NONE
Press / to adjust the item to your desired
position." " indicates the item is blocked.
Press MENU to exit.
Suggested age
TV-Y: All children.
TV-Y7: Directed to older children.
TV-G: General audience.
TV-PG: Parental Guidance suggested.
TV-14: Parents strongly cautioned.
TV-MA: Mature audience only.
Example
MPAA
• The setting automatically enters "Block" for any
ratings below your selection.
• If Status is not set to "On", the configuration settings
will not work.
TV Guidelines
TV-Y
Can. English Ratings
TV-Y7
Can. French Ratings
TV-G
L
TV-PG
S
MPAA (Voluntary movie rating system)
Example
D
TV-14
V
TV-MA
FV
NONE
When setting an individual content-based rating
item:
MPAA
TV Guidelines
G
Can. English Ratings
PG
Can. French Ratings
PG-13
R
NC-17
X
NONE
Press / to adjust the item to your desired
position." " indicates the item is blocked.
Press MENU to exit.
G: General audiences. All ages admitted.
PG: Parental guidance suggested. Some material may
not be suitable for children.
PG-13: Parents strongly cautioned. Some material
may be inappropriate for children under 13.
R: Restricted. Under 17 requires accompanying parent
or adult guardian (age varies in some jurisdictions).
NC-17: No one 17 and under admitted.
X: X is an older rating that is unified with NC-17 but
may be encoded in the data of older movies.
• Voluntary movie rating system only uses an
age-based rating.
1. Press or ENTER to access blocked
content items from the currently selected
age-based rating item.
2. Press / to select an individual item, and
then press ENTER to unblock it (" " is
removed). Repeat the same steps for the
other items.
3. Press or RETURN to register after all
individual content rating items are set.
Content
FV: Fantasy violence.
V: Violence.
S: Sexual situation.
L: Adult language.
D: Sexually suggestive dialog.
Rating
Content
FV
V
S
L
D
TV-Y
TV-Y7
Suggested
age
TV-G
TV-PG
TV-14
TV-MA
35
On-Screen Display Menu
: The content rating can be set, but this
rating is not normally broadcast by TV stations.
: Content rating can be set.
Canadian Rating Systems (Canadian English
ratings and Canadian French ratings)
• The TV rating systems in Canada are based on the
Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television
programming.
• While violence is the most important content
element to be rated, the structure developed takes
into consideration other program content like
language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system
you can choose either the Canadian English ratings
or the Canadian French ratings.
Canadian English Ratings
Example
MPAA
TV Guidelines
E
Can. English Ratings
C
C8+
Can. French Ratings
G
PG
14+
18+
NONE
Press / to adjust the item to your desired
position. " " indicates the item is blocked.
Press MENU to exit.
E: Exempt: Includes news, sports, documentaries and
other information programming; talk shows, music
videos, and variety programming.
C: Children: Intended for younger children under the
age of 8 years. Pays careful attention to themes that
could threaten their sense of security and well-being.
C8+: Children over 8 years old: Contains no portrayal
of violence as the preferred, acceptable, or only way
to resolve conflict; nor encourage children to imitate
dangerous acts which they may see on the screen.
G: General: Considered acceptable for all age groups.
Appropriate viewing for the entire family, contains
very little violence, physical, verbal or emotional.
PG: Parental Guidance: Intended for a general
audience, but may not be suitable for younger
children (under the age of 8) because it could
contain controversial themes or issues.
14+: Over 14 years: Could contain themes where
violence is one of the dominant elements of the
storyline, but it must be integral to the development of
plot or character. Language usage could be profane
and nudity present within the context of the theme.
18+: Adults: Intended for viewers 18 years and older and
might contain depictions of violence, which while
related to the development of plot, character or
themes, are intended for adult viewing. Could contain
graphic language and portrayals of sex and nudity.
Canadian French Ratings
Example
MPAA
TV Guidelines
E
Can. English Ratings
G
Can. French Ratings
8ans+
13ans+
16ans+
18ans+
NONE
36
Press / to adjust the item to your desired
position. " " indicates the item is blocked. Press
MENU to exit.
E: Exempt programming.
G: General: All ages and children, contains minimal
direct violence, but may be integrated into the plot
in a humorous or unrealistic manner.
8ans+: General but inadvisable for young children:
May be viewed by a wide public audience, but could
contain scenes disturbing to children under 8 who
cannot distinguish between imaginary and real
situations. Recommended for viewing with parent.
13ans+: Over 13 years: Could contain scenes of
frequent violent scenes and therefore recommended
for viewing with parent.
16ans+: Over 16 years: Could contain frequent violent
scenes and intense violence.
18ans+: Over 18 years: Only for adult viewing. Could
contain frequent violent scenes and extreme
violence.
How to temporarily release the V-CHIP
BLOCK
When the V-CHIP BLOCK is working and
censors a broadcast, "V-CHIP HAS BEEN
ACTIVATED." displays.
1. Press ENTER while the V-CHIP is working, and
then the secret number setting menu displays.
2. Input the 4-digit secret number by using 0–9.
At this time V-CHIP BLOCK temporarily releases.
Reactivating the temporarily released
V-CHIP BLOCK
You can reactivate the temporarily released
V-CHIP BLOCK as shown below.
• Select "Status" setting from the Parental CTRL menu to
reactivate BLOCK. (See page 34.)
• Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 35 to 36.)
• Switch off the TV power.
• Performing any of the three above will activate the
V-CHIP BLOCK.
Information
Example
Information
TV
US B
PC
ME NU
Menu
Information
ENTER
Identification
EXIT
RETURN
1. Press MENU to display the MENU screen, and
then press / to select "Information".
2. Press / to select a specific adjustment item,
and then press ENTER.
3. Press / (or / ) to select the desired
setting, and then press ENTER.
4. Press MENU to exit.
Identification
The current version of the TV software is displayed.
Enjoying Photo/Music/Video Playback
You can connect the TV to a USB memory
device, USB hard drive to enjoy viewing
pictures, listening to music, and watching
videos.
• Depending on the USB memory device/USB hard
drive, the TV may not be able to recognize the
recorded data.
• It may take time to read the recorded data if the
USB memory device/USB hard drive contains
many files or folders.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending
on character set) may not be displayed.
Input Source
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC IN
USB
HDMI1
HDMI2
HDMI3
COMP/AV
2. Press / to select "Photo", "Music" or
"Video", and then press ENTER.
Example
Photo
Connecting a USB Memory Device/
USB Hard Drive
Insert the USB memory device with recorded
photos, music or videos into the USB terminal
on the TV.
Music
Video
3. Press / to select the desired folder,
and then press ENTER.
• 16GB is the maximum number of USB drives that
can be displayed.
• "VIEW MODE" is fixed during the Photo or Music
mode. During "Video mode", is depending on the
type of video signal currently being received.(see
page 25)
• The key guide display disappears automatically after
a set time. To display the key guide display again,
press DISPLAY.
• When connecting a USB hard drive, be sure to use
a hard drive with an AC adapter.
• Do not remove a USB memory device or memory
card from the TV while transferring files, using the
slide show function, or switching screens, or before
you exit "USB" from the INPUT list.
• Do not insert and remove a USB memory device/
USB hard drive to and from the TV repeatedly.
• When using a card reader, be sure to insert Memory
first before using the card reader.
Playing Back Files on a USB
Memory Device
Photo Mode
Viewing Thumbnails
Example
Photo
\Photo
USB Media
01/02
CAUTION
• Do not use a USB extension cable when
connecting a USB memory device to the USB
terminal on the TV.
• Using a USB extension cable with the USB
memory device may prevent the TV from
performing correctly.
Buttons
Enter
Exit
Exit
ENTER
Description
Select a desired item.
When selecting a folder icon: Enter this directory.
When selecting a photo thumbnail: Slide show.
EXIT
Menu
Return to the previous process.
Sub Menu
▲/▼/
/
▲
1. Press INPUT to select USB from the input
list or press USB direct button to enter it.
Enter
Buttons for thumbnails operations
▲
Select the Files to Play Back
Select
37
Enjoying Photo/Music/Video Playback
Press MENU to display the sub-menu. You can
browse the files by the following options.
• Sort
• Media Type
• Thumbnail size
Buttons for viewing Individual Photos
operation
Buttons
EXIT
A (red)
B (green)
C (blue)
D (yellow)
/
• When there are invalid photo files, the X mark will be
display for the file.
• You can see the file name, shooting date, file size
and pixel size of the selected photo in the top-left
corner of the screen (shooting date is only available
in the EXIF file format).
DISPLAY
Menu
Slide Show
The photo selected on the thumbnail selection
screen by press ENTER.
Example
Photo
Menu
Short
1/29
IMG_9690.jpg
A
Repeat
B
Duration
C
Effect
D
Shuffle
Buttons for slide show operation
Buttons
EXIT
A (red)
B (green)
C (blue)
D (yellow)
/
DISPLAY
Menu
Description
Return to the thumbnail selection screen.
Repeat one / Repeat all.
Select slider show interval.
Select slide show effect.
Play the photo in random order.
Go to the previous/next photo.
Viewing individual photo.
Display the information.
Sub Menu.
Press MENU to display the sub-menu. You can
select the following options to display the photos.
Pause
Repeat
Shuffle
Duration
Effect
Show Info
Play
Repeat
Shuffle
Rotate
Zoom
Show Info
• The key guide display disappears automatically after
a set time. To display the key guide display again,
press DISPLAY.
• Rotating photos only applies to the temporarily
selected item and this setting is not saved.
Music Mode
Example
Music
Buttons
▲
/
The photo in slide show by pressing
.
Example
001
0
01
1.mp3
5.mp3
6.mp3
7.mp3
Enter
EXIT
Menu
Short
None
Menu
38
Menu
5/29
G%25C3%2592TIC-DESCANSANT.jpg
A
Repeat
B
Rotate
C
Zoom
D
Shuffle
3.mp3
Enter
Exit
• Sort
• Media Type
• Thumbnail size
Example
00:00:03
00:04:49
2.mp3
1x
2.mp3
4.mp3
Exit
Press MENU to display the sub-menu. You can
browse the files by the following options.
Music
Photo
003
USB Media
Description
Select a desired item.
When selecting a folder icon: Enter this
directory.
When selecting a music file: Play music.
Return to the previous process.
Sub Menu
ENTER
Viewing Individual Photos
2011-05-27
Select
▲/▼/
• The key guide display disappears automatically after
a set time. To display the key guide display again,
press DISPLAY.
01/02
\Music
Buttons for music mode
▲
•
•
•
•
•
•
Press MENU to display the sub-menu. You can
select the following options to display the photos.
•
•
•
•
•
•
1x
None
Menu
Description
Return to the thumbnail selection screen.
Repeat one / Repeat all
Rotate the photo by 90 degrees to the right.
Zoom photo.
Play the photo in random order.
Go to the previous/next photo.
Slider show.
Display the information.
Sub Menu
Menu
Menu
A
Repeat
B
Shuffle
3/8
Enjoying Photo/Music/Video Playback
Buttons for playing music
Press MENU to display the sub-menu. You can
select the following options to play the musics.
•
•
•
•
•
•
Buttons
EXIT
A(red)
B(green)
C (blue)
Description
Return to the thumbnail selection screen.
Repeat one / Repeat all
Play the music in random order.
Go to the next/previous photo.
Forward/Backward.
Play/Pause.
Display the information.
Sub Menu
Pause
Repeat
Shuffle On
Show Info
Hide Spectrum
Lyric options
01/02
USB Media
OK.Youknow,mostofthecollectionherewasputtogetherduringtheChing dynasty.
So,whatdidyouthink?
Iwasimpressedwiththelandscapepaintings,andallthejadecarvings.
Thatjadecabbagejustcan'tbebeat!
Someofthebronzepiecesgobacktothe17thcenturyB.C.,butthecollectionitselfwas
setupbythefirstemperoroftheSungdynastyoverathousandyearsago.
That'sthesamestyleroofasontheChiangKai-shekMemorialandthe
ConcertHall,right?ItseemslikeI'veseenitbefore.
Microsoft GIF... images_169 Araxis Merge v...
Select
Enter
Press MENU to display the sub-menu. You can
follow the options to play the videos.
Pause
Repeat
Program
Show Info
AV Mode
Title
Edition
Chapter
View Mode
Music
Photo
Enter
_Epic_puti..
Exit
Exit
USB device
File system
Photo file
format
Music file
format
Buttons for Video mode
Buttons
▲
/
▲
▲/▼/
ENTER
EXIT
Menu
Description
Select a desired item.
When selecting a folder icon: Enter this
directory.
When selecting a video file: Play video.
Return to the previous process.
Sub Menu
Press MENU to display the sub-menu. You can
browse the files by the following options.
• Sort
• Media Type
• Thumbnail size
1x
USB Memory, USB card reader (Mass
Storage class), USB hard drive
FAT/FAT32/NTFS (USB hard drive only)
JPEG (.jpg .jpeg) Progressive JPEG
(.jpg .jpeg) BMP (.bmp) PNG (.png)
MP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k,
96k, 112k, 128k, 160k, 192k, 224k,
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video file format
File
Container
Video
extension
XviD
H.264
MPEG4
.avi
AVI
Motion Jpeg
MPEG2
MPEG1
.mkv
MKV
XviD
H.264
MPEG4
MPEG2
.asf
ASF
XviD
H.264
.mp4
MP4
(SMP4)
.mov
MP4
(SMP4)
.mpg
.mpeg
PS
Example
OK. You know, most of the collection here was put together during the Ching dynasty.
So, what did you think?
I was impressed with the landscape paintings, and all the jade carvings.
That jadecabbage just can't be beat!
Some of the bronze pieces go back to the 17th century B.C., but the collection itself was
set up by the first emperor of the Sung dynasty over a thousand years ago.
That's the same style roof as on the Chiang Kai-shek Memorial and the
Concert Hall, right? It seems like I've seen it before.
Vedio
Description
Return to the thumbnail selection screen.
Repeat one / Repeat all
Backward
Forward
Repeat AB. Select the part you want to
play repeatedly.
Go to the next/previous video.
Play/Pause/Stop.
Display the information.
Sub Menu
USB Device Compatibility
Example
\
menu2
/
/ /
DISPLAY
Menu
•
•
•
•
•
•
•
•
•
Video Mode
Video
D (yellow)
▲
Buttons
EXIT
A(red)
B(green)
/
/
/
DISPLAY
Menu
1/1
00:00:08
00:19:23
1/1
_ _Epic-Putin paws women voters_-1
Menu
Menu
A
Repeat
B
Backward
Buttons for playing Video
C
Forward
D
Repeat AB
XviD
H.264
MPEG4
XviD
H.264
MPEG4
Motion Jpeg
MPEG2
MPEG1
Audio
MP3
AC3
LPCM
ADPCM
MP3
AC3
LPCM
ADPCM
MP3
AC3
LPCM
ADPCM
MP3
AAC/HEAAC
MP3
AAC/HEAAC
AC3
LPCM
MPEG
• Operation using USB hubs is not guaranteed.
• Some video file formats may not be played
depending on the file.
• Some images may not be displayed in the
appropriate aspect ratio depending on the file format.
39
Appendix
Troubleshooting
Problem
No power
Unit cannot be
operated.
Possible Solution
Check if you pressed POWER on the remote control unit.
(See page 21.) If the indicator on the TV is still red,
press POWER on the TV.
Is the AC cord disconnected? (See page 9.)
Has the power been turned on? (See page 21.)
External influences such as lightning, static electricity, may
cause improper operation. In this case, operate the unit after
first turning off the power of the TV or unplugging the AC cord
and re-plugging it after 1 or 2 minutes.
Remote control unit
does not operate.
Are batteries inserted with polarity ( , ) aligned?
(See page 12.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated near the remote control
sensor?
Picture is cut off/with
sidebar screen.
Are screen mode adjustments such as picture size made
correctly? (See page 25.)
Strange color,
light color, or color
misalignment
Adjust the picture tone. (See page 29.)
Is the room too bright? The picture may look dark in a room
that is too bright.
Is the sleep timer set? (See page 23.)
The unit’s internal temperature has increased. Remove any
objects blocking vent.
Power is suddenly
turned off.
No picture
No sound
The TV sometimes
makes a cracking
sound.
Is connection to other components correct? (See page 16.)
Is the correct input selected? (See page 16.)
Is the volume too low? (See page 23.)
Have you pressed MUTE on the remote control unit?
(See page 23.)
This is not a malfunction. This happens when the cabinet
slightly expands and contracts according to change in
temperature. This does not affect the TV’s performance.
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture
may leave trails or appear slightly delayed. This is not a malfunction, and the unit will
recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the Liquid Crystal panel to malfunction.
Storage temperature: -4°F to +140°F (-20°C to +60°C)
40
Appendix
Specifications
Item
LCD
panel
TV
Function
Model: LC-46SV50U
Model: LC-42SV50U
Size
46” Class (46” Diagonal)
42” Class (42” Diagonal)
Resolution
2,073,600 pixels (1,920 x 1080)
2,073,600 pixels (1,920 x 1080)
TV-standard (CCIR)
American TV Standard ATSC/NTSC System
VHF/UHF
VHF 2-13ch, UHF 14-69ch
CATV
1-135ch (non-scrambled channel only)
Digital
Receiving Terrestrial
2-69ch
Channel Broadcast
(8VSB)
Digital cable *1
(64/256
1-135ch (non-scrambled channel only)
QAM)
Audio multiplex
Audio out
BTSC System
10 W x 2
Side
Terminals
Rear
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
USB
Photo/Music/Video mode, Software update
Headphone
Headphone out
RS-232C
9-pin D-sub male connector
DIGITAL
AUDIO
OUTPUT
Optical Digital audio output x 1 (PCM/Dolby Digital)
INPUT 2
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
INPUT 3
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
INPUT 4
COMPONENT/ AV in
INPUT 5
ANALOG RGB (PC) in (15-pin mini D-sub female connector)
AUDIO
PC/HDMI
Audio in (Ø 3.5 mm jack)
ANT/CABLE
75Ω Unbalance, F Type x 1 for Analog And Digital (VHF/ UHF/ CATV)
OSD language
English/French/Spanish
Power Requirement
AC 120V~60Hz
Power Consumption
Weight
Dimension *2
(W x H x D)
Operating temperature
10 W x 2
INPUT 1
210W (0.7W Standby with AC 120V) 170W(0.7W Standby with AC 120V)
TV + stand
51.8 lbs./23.5 kg
40.8 lbs./18.5 kg
TV only
46.3 lbs./21.0 kg
35.3 lbs./16.0 kg
TV + stand
44 7/ 64 x 29 21/ 32 x 12 13 / 32 inch
40 29/32 x 27 27/ 32 x 11 3 /16 inch
TV only
44 7/ 64 x 27 7/ 8 x 3 53/64 inch
40 29/32 x 26 7 / 64 x 3 33/64 inch
+32°F to +104°F (0°C to +40°C)
• As part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be some deviations from these
values in individual units.
41
Appendix
Specifications
Item
LCD
panel
Model: LC-32SV40U
Size
32” Class (31 33/64” Diagonal)
Resolution
1,049,088 pixels (1,366 x 768)
TV-standard (CCIR)
VHF/UHF
CATV
Receiving Digital Terrestrial
Channel Broadcast (8VSB)
Digital cable *1
(64/256 QAM)
Audio multiplex
TV
Function
Audio out
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
1-135ch (non-scrambled channel only)
2-69ch
1-135ch (non-scrambled channel only)
BTSC System
5Wx2
Side
INPUT 1
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
USB
Photo/Music/Video mode, Software update
Headphone
Headphone out
RS-232C
9-pin D-sub male connector
DIGITAL AUDIO OUTPUT Optical Digital audio output x 1 (PCM/Dolby Digital)
Terminals
Rear
INPUT 2
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
INPUT 3
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
INPUT 4
COMPONENT/ AV in
INPUT 5
ANALOG RGB (PC) in (15-pin mini D-sub female connector)
AUDIO PC/HDMI Audio in (Ø 3.5 mm jack)
ANT/CABLE
75Ω Unbalance, F Type x 1 for Analog And Digital (VHF/ UHF/ CATV)
OSD language
English/French/Spanish
Power Requirement
AC 120V~60Hz
Power Consumption
Weight
*2
Dimension
(W x H x D)
Operating temperature
100W (0.7W Standby with AC 120V)
TV + stand
24.3 lbs./11.0 kg
TV only
21.2 lbs./9.6 kg
TV + stand
30 63/64 x 22 3/ 32 x 9 47/64 inch
30 63/64 x 20 9 / 16 x 3 15/64 inch
TV only
+32°F to +104°F (0°C to +40°C)
• As part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be some deviations from these
values in individual units.
42
Appendix
PC Compatibility Chart
It is necessary to set the PC correctly to display XGA and WXGA signal.
PC
Resolution
720 x 400
VGA
SVGA
PC
XGA
640 x 480
800 x 600
1024 x 768
Horizontal
Frequency
Vertical
Frequency
VESA Standard
31.46 kHz
70.08 Hz
—
31.47 kHz
59.94 Hz
O
37.50 kHz
75.00 Hz
O
37.88 kHz
60.32 Hz
O
48.08 kHz
72.19 Hz
O
46.88 kHz
75.00 Hz
O
48.36 kHz
60.00 Hz
O
56.48 kHz
70.07 Hz
O
60.02 kHz
75.03 Hz
O
WXGA
1366 x 768
47.71 kHz
59.79 Hz
O
* WUXGA
1920 x 1080
66.58 kHz
59.94 Hz
O
* Only LC-46SV50U / LC-42SV50U support this timing, LC-32SV40U doesn’t support it.
43
Appendix
RS232 Port Specifications
PC control of the TV
Command format
• Attach an RS-232C cable cross-type (commercially
available) to the supplied Din/D-Sub RS-232C for the
connections.
Eight ASCII codes + CR
• This operation system should be used by a person who is
accustomed to using computers.
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0–9, x, blank, ?
C1 C2 C3 C4 P1 P2 P3
Command 4-digits
Communication conditions
Set the RS-232C communication settings on the PC to
match the TV's communication conditions.
The TV's communication settings are as follows:
Baud rate:
Data length:
Parity bit:
Stop bit:
Flow control:
9,600 bps
8 bits
None
1 bit
None
Return code
Parameter
0
Communication procedure
Parameter 4-digits
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that 4 values are
input for the parameter.)
When the input parameter is not within an adjustable
range, “ERR” returns. (Refer to “Response code format”.)
Any numerical value can replace the “x” on the table.
0
Send the control commands from the PC via the RS232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
P4
0
0
3
0
9
When “?” is input for some
commands, the
?
present setting
value responds.
?
?
?
?
Response code format
Normal response
O
K
Return code (0DH)
Problem response (communication
error or incorrect command)
E
R
R
Return code (0DH)
Command table
Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
POWER ON COMMAND SETTING
POWER SETTING
TOGGLE
TV
COMMAND
R
P
O
I
T
G
D x
_
_
_
_
_ Off
_ On
_ Power Off
The Power On command rejected.
The Power On command accepted.
It shifts to standby.
1
_
_
_ Power On
The Power On Command must be waited until system is completely Power Off (LED power
indicator turns to be Red)
It input-switches by the toggle. (It is the same as an input change key)
(Toggle)
V
D 0
I
A
V
D
*
Input terminal number (1–6)
It input-switches to INPUT1~INPUT6.
AV MODE SELECTION
A
V
M D
*
0:(TOGGLE) ,1:STANDARD,2:MOVIE,3:GAME,4:PC,
5:DYNAMIC,6:DYNAMIC(FIXED),7:USER
Although it can choose now, it is toggle operation in inside.
VOLUME
V
O
L
INPUT1-6
H-POSITION
POSITION
M *
It input-switches to TV. (A channel remains as it is. (Last memory))
*
Volume (0–100)
H
P
O S
*
*
*
Only PC mode. (0–100,menu disolay range+/-50)
V-POSITION
V
P
O S
*
*
*
CLOCK
C
L
C
K
*
*
*
Only PC mode. (0–40,menu display range+/20)
Only PC mode. (0–180,menu display range+/-90)
PHASE
P
H S
E
*
*
*
Only PC mode. (0–40,menu display range+/-20)
W
I
D E
*
0:(Toggle) 1:Normal 2:S.Stretch 3:Stretch 4:Zoom
5:Full Screen 6:Dot by Dot 7:Cinema)
VIEW MODE
MUTE
T
E
*
SURROUND
A
C S
U
*
AUDIO SELECTION
M
A
C
U
H
A
x
SLEEP TIMER
O
F
T
M
*
C H
_
_
_
_
The screen position variable ranges depend on the View Mode or the
signal type. The ranges can be seen on the position-setting screen.
0: Although it can choose now, it is toggle operation in available items.
1: Available in [AV] SD timing and [PC] except some timing (*1)
2,3,4: Only available when [AV] signal is being input.
5: Available in [AV] 720p and [PC] except 1280x720, 1920x1080 timing.
6: Available in [AV] 1080i and 1080p timing and [PC] except 1600x1200, 1280x1024(LC-32SV40U)
and 1400x1050(LC-32SV40U).
7: Only available in [PC] except some timing(*2)
(*1)1360x768, 1366x768, 1280x1024, 1400x1050, 1600x1200, 1920x1080
(*2)1360x768, 1366x768, 1280x720, 1920x1080
0: (Toggle), 1: On, 2: Off
0: (Toggle), 1: On, 2: Off
*
*
*
D
D
A 2 P *
C 2 U *
*
*
*
*
_ (Toggle)
0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN.,
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
The channel number of TV
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
(1–135)
In Cable, 1–135ch is effective.
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)
* (0100-9999)
_ (1-999)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
D
C
2
L
*
*
*
_
(0-999)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
D
D
C
C
1
1
0
1
*
*
*
*
*
*
*
*
(0-9999)
(0-6383)
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)
CH UP
C
H
U
P x
The channel number of TV +1
CH DOWN
C
C
H D W x
L C P x
The channel number of TV –1
(Toggle)
DIRECT
CHANNEL
(ANALOG)
DIRECT
CHANNEL
(DIGITAL)
CHANNEL
Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
<
CC
D C
If it is not TV display, it will input-switch to TV. (same function as CH
Toggle operation of a closed caption.
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL
CONTENTS.
• Any numerical value can replace the “x” on the table.
44
)
<
INPUT SELECTION A
T
CONTROL CONTENTS
PARAMETER
P W 0
1
W R 0
I
S
Appendix
Information on the Software License for This Product
■ Software composition
The software included in this product is comprised of various software components
whose individual copyrights are held by SHARP or by third parties.
■ Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included
with this product that were developed or written by SHARP are owned by SHARP and are
protected by the Copyright Act, international treaties, and other relevant laws. This product
also makes use of freely distributed software and software components whose copyrights
are held by third parties. These include software components covered by a GNU General
Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or
other license agreement.
■ Obtaining source code
Some of the open source software licensors require the distributor to provide the
source code with the executable software components. GPL and LGPL include similar
requirements. For information on obtaining the source code for the open source software
and for obtaining the GPL, LGPL, and other license agreement information, visit the
following website:
http://www.sharpusa.com/gpl
We are unable to answer any questions about the source code for the open source
software. The source code for the software components whose copyrights are held by
SHARP is not distributed.
■ Acknowledgements
The following open source software components are included in this product:
• linux kernel/busybox/uClibc/zlib/libpng/libjpeg
CLEARING THE MASTER PASSWORD
If you forgot the password number, reset the secret number by following the procedures
below:
1. Press MENU
2. Select "InitialSetup", press "ENTER"
3. Select "Individual Setup", press "ENTER"
4. Press number 7071
5. Select "Secret No."
6. Enter new password
• As a precautionary measure, make a note of your secret number above, cut it from this manual,
and keep it in a safe place.
45
Appendix
Legal notices
■ FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply within the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
■ FCC warning
Changes or modifications not expressly approved by the party responsible for compliance
with the FCC Rules could void the user’s authority to operate this equipment.
■ Cables
Connections to this device must be made with shielded cables with metallic RF/EMI
connector hoods to maintain compliance with FCC Rules and Regulations.
■ Canadian notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
“Standard Television Receiving Apparatus-Appareil de reception télévision ordinaire,
Canada BETS-7 / NTMR-7”.
46
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature,
accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either
repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or
labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has been
removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This limited warranty
will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial,
household use of the Product by consumers in their home or residence. If you intend to or already use this Product for commercial purposes or in a
commercial setting, there are warranties available to cover your use of this Product, the terms of which may vary. Please contact 1-800-BE-SHARP
for further information.
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of
purchase to the servicer, which proof must include the date of purchase.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or implied.
Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES
INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY
EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION
OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the
purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted. Correction of
defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp
to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability
or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to abuse
(including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, alteration, modification, tampering, misuse,
improper operation or maintenance or any damages or defects in the Product which were caused by repairs or attempted repairs performed by
anyone other than a Sharp authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein
may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA. AND PUERTO RICO
Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Exclusions from
Warranty Coverage (if any):
LC-46SV50U, LC-42SV50U, LC-32SV40U LCD Color Television
(Be sure to have this information and Proof of Purchase available when you
need service for your Product.)
One (1) year parts and labor from date of purchase.
Image Retention resulting from a fixed image being displayed for long periods of
time is not covered by this Limited Warranty (see Operation Manual on how to
prevent this).
Service is provided by a Sharp Authorized Service Center in the United States. To
find the location of the nearest Sharp Authorized Service Center, call Sharp toll
free at 1-800-BE-SHARP. Sharp will provide instructions on service options
available for your Product.
What to do to Obtain Service:
If it is deemed the Product is to be shipped for servicing, be sure it is insured and
packaged securely. Please use two persons to carry the Product, transport it in
original packaging or packaging that provides comparable protection of the
Product, and ensure that the Product is covered to avoid scratches and damage.
Sharp shall not be responsible for lost, stolen or misdirected mail or for damage to
the product incurred during shipping.
For Products that are deemed in home service, a servicer will come to your
location. If necessary, the servicer may remove the unit for repair at the service
facility and return it once completed. In home service is not available in all areas
and Sharp may, at our option, elect to provide transportation of the Product to and
from an Authorized Service Center in those areas.
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES, CALL 1-800-BE-SHARP OR VISIT www.SharpUSA.com
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
47
Dimensional Drawings
Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
LC-46SV50U
44 7/64 (1120)
5 23/64 (136)
3
53/64
22 43 /64
(575.67)
16 15 /32 (418)
*1
27 7/8 (708)
29 21/32 (753)
40 13/64 (1021.08)*1
12 13/32 (315)
21 15 /32 (545)
ANT /CABLE
AUDIO
PC/HDMI
PC IN
INPUT 2
INPUT 3
AC IN
*1
Active area/Área activa/Zone active
INPUT 4
Y/VIDEO
PB
PR
L - AUDIO - R
15 3/4 (400)
6 5 /16
(160)
15 3/4 (400)
(97)
Dimensional Drawings
Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
LC-42SV50U
40 29/32 (1039)
15 9/16
(395)
20 47/64
(526.26)
*1
11 3 /16 (284)
20 7/16 (519)
Active area/Área activa/Zone active
7 7/8 (200)
2 49/64
(70)
7 7/8 (200)
*1
3 33/64 (89)
*1
26 7/64 (663)
27 27/32 (707)
36 3 /4 (933.24)
5 (127)
Dimensional Drawings
Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
LC-32SV40U
30 63/64 (787)
4 1 /32 (102)
3 15 /64 (82)
11 5/64 (281)
15 9/16
(395.26)
*1
20 9 /16 (522)
22 3 /32 (561)
27 19/32 (700.68) *1
9
16 11/32 (415)
*1
*2
Active area/Área activa/Zone active
Thinnest part/Parte más delgada/Partie la plus mince
7 7/8 (200)
3 23/64
(85)
7 7/8 (200)
47/64
(247)
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in China
Imprimé au Chine
Impreso en China
XXXXXXXXXXXXX