iLive IBP182B docking speaker User's Guide

USER’S GUIDE

V:1003-0109-12

IBP182B

Portable Music System for iPod/iPhone

For the most up-to-date version of this User’s Guide, go to www.ilive.net

2

Warnings and Precautions

• CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

• AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.

• CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure.

• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.

• WARNING: Shock hazard - Do Not Open.

• AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS

OUVRIR

Mains Plug or Direct plug-in adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the Mains Plug or Direct plug-in adapter should be disconnected from the mains socket outlet completely.

La fiche d’alimentation ou adaptateur de courant est utilisé comme dispositif de déconnexion et doit rester accessible pendant l’utilisation. Pour mettre l’appareil hors tension, la fiche ou adaptateur de courant doit être débranché de la prise de courant.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable

(ni-cad, ni-mh, etc) batteries.

No mezcle baterías viejas y nuevas.

No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

WARNING: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

FCC Warnings

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.

• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable.

• Caution marking is located at the rear or bottom of the apparatus.

Attention marquage est situé sur le paneau arrière ou inférieur de l’unité.

• The marking information is located at the rear or bottom of apparatus.

Le marquage est situé sur le paneau arrière ou inférieur de l’unité.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.

Special note: When placing your unit on a lacquered or natural finish, protect your furniture with a cloth or other protective material.

Customer Support: 1-888-999-4215 3

Introduction

Line In/FM

Press to switch to

Line In or FM Mode.

Power Indicator Power/Play/Pause

Press to turn the unit on.

Press and hold to turn the unit off.

Press to play or pause a docked iPod or iPhone.

Tuning +/-

Press to tune the FM radio in FM Mode.

4 iPod

Press to switch to iPod/iPhone Mode.

Mem/M+

Press and hold to save the current radio station as a preset.

Press repeatedly to cycle through preset stations.

Volume +/-

Press to adjust the volume.

FM Antenna

Customer Support: 1-888-999-4215

Line In

5

6

Setup

Power

DC power input: requires an AC/

DC power adapter (included)

Battery Power

Requires 4 C batteries (not included)

iPod and iPhone

Docking an iPod or iPhone

1. Connect the iPod or iPhone to the connector on the unit.

2. When the unit is plugged in, using AC power, the docked iPod or iPhone will charge.

Playing a Docked iPod or iPhone

1. Press the Power button to turn the unit on.

2. Press the iPod button to switch to iPod mode.

3. Follow the instructions for

Docking an iPod or iPhone.

4. Press the Play/Pause button to begin playing the docked iPod or iPhone.

Radio and 3.5mm Audio Input

Tuning the FM Radio

1. Press the Line In/FM button to switch to FM mode.

2. Press the Tuning +/- buttons to tune the FM radio. Press and hold the Tuning +/-buttons to search for the next available station.

Adjust the FM Antenna to improve FM radio reception.

Saving an FM Station as a Preset

1. Follow the instructions for

Tuning the FM Radio.

2. After you have tuned to the desired station, press and hold the Mem/

M+ button to begin saving the current station as a preset.

3. Press the Tuning +/- buttons to adjust the preset channel.

4. Press and hold the Mem/M+ button to save the current radio station to the selected preset channel.

Up to 20 stations may be saved as presets.

Using Preset Stations

1. Follow the instructions for Saving an FM Station as a Preset.

2. Press the Mem/M+ button repeatedly to cycle through saved radio stations.

Using the 3.5mm Audio Input

Requires a 3.5mm audio cable (not included)

1. Connect a 3.5mm audio cable to the Line In on the unit and an audio output on an MP3 player or other audio source.

2. Press the Line In/FM button to switch to Line In mode.

3. Use the native controls on the connected MP3 player or other audio source to play and control audio played through the clock radio.

Customer Support: 1-888-999-4215 7

8

Company Information

International Support

To download this User’s Guide in

English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at www.iliveelectronics.com.

Para descargar este Manual del

Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en www.iliveelectronics.com.

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur www.iliveelectronics.com.

Contact Information

Phone: 1-888-999-4215

Email: [email protected]

Parts Email: [email protected]

Website: www.iliveelectronics.com

Compatibility

To get information on which iPod, iPhone, or iPad products are compatible with this product, go to www.iliveelectronics.com.

Green Initiative

Warranty

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iliveelectronics.com.

Environmental Commitment to ‘Protect for Today and Sustain for Tomorrow’

On a continual basis DPI, Inc. is making efforts to sustain the environment and improve the recyclability of its products and packaging.

Focusing on “protecting for today and sustaining for tomorrow” DPI, Inc. has committed to reducing packaging size, increasing the usage of recyclable plastics, and ensuring that packaging and manuals are made with up to 85% recycled material.

In addition to material consideration, DPI,

Inc. has also focused on the finer details that positively impact the environment such as employing the usage of soy-based inks.

DPI, Inc. also ensures that the factories that produce the company’s wide variety of consumer electronics adhere to environmentally friendly air and water restrictions. This is yet another example that every step of the way

DPI, Inc. is making efforts to lessen any impact on the environment.

In 2011 DPI, Inc. also began conversations with Energy Star in order to ensure that the consumer electronics being produced meet high standards of energy efficiency. The ultimate goal is keeping energy costs for consumers low while providing quality, feature-rich products.