For product support, visit
www.philips.com/support
HTL4115B
User manual
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact
Philips Customer Care Center at 1-866-310-0744
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989;
Mexico city: 5887-9736
For Product recycling information, please visit - www.recycle.philips.com
English
Contents
1Important
2
2
2
4
4
2 Your Surround Base
4
4
5
6
3 Place your Surround Base
6
Help and support
Important safety instructions
Care for your product
Care of the environment
Main unit
Remote control
Connectors
4 Connect and set up
7
Connect to TV
7
Connect audio from TV and other devices8
5 Use your Surround Base
9
9
9
9
9
10
10
11
11
6 Product specifications
11
7Troubleshooting
12
8Notice
14
14
15
Adjust the volume
Choose your sound
MP3 player
Play audio through Bluetooth
Play music via NFC
USB storage devices
Auto standby
Apply factory settings
Notice of compliance
Trademarks
EN
1
1Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
other apparatus (including amplifiers) that
produce heat.
••
Help and support
For extensive online support, visit
www.philips.com/support to:
• download the user manual and the quick
start guide
• watch video tutorials (available only for
selected models)
• find answers to frequently answered
questions (FAQs)
• email us a question
• chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note down
the model number and serial number of your
product. You can find this information on the
back or bottom of your product.
Important safety instructions
••
••
••
••
••
••
••
••
2
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources
such as radiators, heat registers, stoves, or
EN
••
••
••
••
••
••
Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult
an electrician for replacement of the
obsolete outlet.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Use only with the cart, stand, tripod,
bracket or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning
storm or when unused for long periods of
time.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Battery usage CAUTION - To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
•
•
•
•
••
••
••
••
••
•
the disconnect device shall remain readily
operable.
Do not place this apparatus on the
furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing
or climbing on it. A falling apparatus can
cause serious injury or even death.
This apparatus should not be placed in a
built-in installation such as a bookcase or
rack unless proper ventilation is provided.
Make sure to leave a space of 7.8 inches
(20cm) or more around this apparatus.
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed
on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
EN
3
English
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
• The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.
• Perchlorate Material - special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
Apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the apparatus (for example. liquid filled
objects, lighted candles).
This apparatus may contain lead and
mercury. Dispose according to local,
State or Federal laws. For disposal or
recycling information, please contact your
local authorities. For additional assistance
on recycling options, please contact
www.mygreenelectronics.com or www.
eiae.org or www.recycle.philips.com.
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
Care for your product
Use only microfiber cloth to clean the product.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. Please
visit www.recycle.philips.com for additional
information on a recycling center in your area.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
The batteries supplied do not contain the heavy
metals mercury and cadmium. Nevertheless,
in many areas batteries may not be disposed
of with your household waste. Please ensure
you dispose of batteries according to local
regulations.
For perchlorate material, special handling may
apply. Visit www.dtsc.ca.gov/hazardouswaste/
perchlorate.
2 Your Surround
Base
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers(e.g. notification
of product software upgrade), register your
product at www.philips.com/welcome.
Main unit
This section includes an overview of the main
unit.
a b
c
d
a LED display
b
• Press to switch the Surround Base on
or off.
• Rotate to adjust the volume.
c SOURCE
Select an input source or Bluetooth mode
for the Surround Base.
d NFC tag
Tap the NFC-enabled device on the tag for
Bluetooth connection.
4
EN
This section includes an overview of the
remote control.
English
c OPTICAL
Switch your audio source to the optical
connection.
Remote control
d AUX/AUDIO IN
Press repeatedly to switch your audio
source to the AUX connection or MP3
connection (3.5mm jack).
a
e Bluetooth
Switch to Bluetooth mode.
b
f
c
q
d
e
g
f
g
h
p
i
o
n
Start, pause or resume play in USB mode
and Bluetooth mode (only for AVRCPsupported Bluetooth devices).
/
Skip to the previous or next track in USB
mode and Bluetooth mode (only for
AVRCP-supported Bluetooth devices).
h USB
Switch to USB mode.
i VOLUME +/Increase or decrease the volume.
j BASS +/Increase or decrease bass.
m
k TREBLE +/Increase or decrease treble.
l
l DIM
Set the brightness of Surround Base display
panel.
j
k
m NIGHT MODE
Turn night mode on or off.
a
• Switch the Surround Base on or off.
• When EasyLink is enabled, press and
hold for at least three seconds to
switch the connected HDMI devices
to standby.
b HDMI ARC
Switch your source to HDMI ARC connection.
HDMI ARC can only be selected if you
connect your Surround Base to an HDMI
ARC compliant TV through HDMI ARC.
n SURR
Select stereo or virtual surround sound.
o
Mute or restore the volume.
p SOUND
Select a sound mode.
q COAX
Switch your audio source to the coaxial
connection.
EN
5
Connectors
This section includes an overview of the
connectors available on your Surround Base.
Side connectors
3 Place your
Surround Base
This Surround Base is designed to be placed
under your TV.
Caution
•• The Surround Base is designed for TVs that weigh no
a AUDIO IN
Audio input from an MP3 player (3.5mm
jack).
b
Audio input from a USB storage device.
Rear connectors
ab
c d
a COAXIAL IN
Connect to a coaxial audio output on the
TV or other devices.
b AUX IN
Connect to an audio output on the TV or
other devices.
c HDMI OUT (ARC)
Connect to the HDMI input on the TV.
d OPTICAL IN
Connect to an optical audio output on the
TV or other devices.
6
EN
more than 24 kg / 52.9 lbs. Do not place a CRT type
TV on the Surround Base.
•• Do not place the Surround Base on an unstable cart,
stand, bracket or table. Otherwise, the Surround Base
may fall, causing serious injury to a child or adult and
serious damage to the product.
•• Make sure the ventilation openings on the rear panel
are not blocked.
•• Do not change the position of the Surround Base after
placing your TV on top of it.
1
Place the Surround Base on any flat and
stable surface near your TV. Then place
your TV on the top of the Surround Base.
Make sure the TV base is centered on it
and not hanging over any of its edges.
Tip
•• If the TV base is too large to put on top of the
Surround Base, place the Surround Base in another
location such as on an open shelf under the TV, but
keep it close to your TV so the audio cable will reach.
You can also mount your TV on the wall above the
Surround Base.
•• If your TV comes with an anti-tip device, install it
according to the manufacturer's instructions and adjust
the tether after placing the TV on top the Surround
Base.
•• If placing the Surround Base in a cabinet or on a shelf,
for optimum audio performance, make sure the font
of the Surround Base as close as possible to the front
edge of the shelf.
•• If placing the Surround Base backed up to a wall, make
sure there is at least a distance of 1 inch between the
wall and the rear of the Surround Base.
4 Connect and set
up
This section helps you connect your Surround
Base to a TV and other devices, and then set it
up.
For information about the basic connections
of your Surround Base and accessories, see the
Quick start guide.
Note
•• For identification and supply ratings, see the type plate
at the back or bottom of the product.
•• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect to TV
Connect your Surround Base to a TV to watch
videos. You can listen to the TV audio through
your Surround Base.
Use the best quality connection available on
your Surround Base and TV.
Connect to TV through HDMI (ARC)
Best quality audio
Your Surround Base supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI
ARC compliant, you can hear the TV audio
through your Surround Base by using a single
HDMI cable.
TV
EN
7
English
2
1
2
Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on
your Surround Base to the HDMI ARC
connector on the TV.
• The HDMI ARC connector on the TV
might be labeled differently. For details,
see the TV user manual.
On your TV, turn on HDMI-CEC operations.
For details, see the TV user manual.
1
Using an optical cable, connect the
OPTICAL IN connector on your Surround
Base to the OPTICAL OUT connector on
the TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
Note
•• If your TV is not HDMI ARC compliant, connect
an audio cable to hear the TV audio through your
Surround Base.
•• If your TV has a DVI connector, you can use an HDMI/
DVI adapter to connect to TV. However, some of the
features may not be available.
Connect audio from TV and
other devices
1
Play audio from TV or other devices through
your Surround Base speakers.
Use the best quality connection available on
your TV, Surround Base, and other devices.
Note
•• When your Surround Base and TV are connected
through HDMI ARC, an audio connection is not
required.
Option 1: Connect audio through a
digital optical cable
Best quality audio
EN
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
IN connector on your Surround Base to
the AUDIO OUT connectors on the TV
or other device.
VCR
TV
8
Using a coaxial cable, connect the
COAXIAL IN connector on your
Surround Base to the COAXIAL/DIGITAL
OUT connector on the TV or other
device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
This section helps you use the Surround Base
to play media from a wide range of sources.
Before you start
• Make the necessary connections described
in Quick start guide and User manual.
• Switch the TV to the correct source for
the Surround Base.
Adjust the volume
1
Rotate the power knob or press VOLUME
+/- on remote control to increase or
decrease a volume level.
• To mute sound, press .
• To restore the sound, press again or
press VOLUME +/-.
Night mode
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
1
Press NIGHT MODE to turn night mode
on or off.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
2
3
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your Surround Base.
Press AUDIO IN on the remote control.
Press the buttons on the MP3 player to
select and play audio files or music.
Choose your sound
Play audio through Bluetooth
This section helps you choose the ideal sound
for your video or music.
Through Bluetooth, connect the Surround Base
with your Bluetooth device (such as an iPad,
iPhone, iPod touch, Android phone, or laptop),
and then you can listen to the audio files stored
on the device through your Surround Base.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR repeatedly to select surround
mode or stereo mode.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the Surround Base.
1
Press TREBLE +/- or BASS +/- to change
the treble or bass level.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 3.0 + EDR.
• The operational range between the
Surround Base and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press Bluetooth on the remote control
to switch the Surround Base to Bluetooth
mode.
»» [BT] is displayed.
EN
9
English
5 Use your
Surround Base
2
3
4
5
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
HTL4115B to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
Wait until you hear a beep sound from the
Surround Base.
»» [BT] is displayed.
•
The operational range between the main
unit (left and right speakers) and a NFC
device is approximately 10 meters (30
feet).
1
Enable NFC on your Bluetooth device (see
the user manual of your device for details).
2
Tap the NFC device on the NFC tag of
this product until you hear a beep sound
from this product.
»» The NFC device is connected to
this product via Bluetooth. [BT] is
displayed.
»» If the connection fails, [BT] is flashed.
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
/ to skip to a track,
or press
to pause/resume play.
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•• The music streaming may be interrupted by obstacles
between the device and Surround Base, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•• If you want to connect your Surround Base with
another Bluetooth device, press and hold Bluetooth
on the remote control to disconnect the currently
connected Bluetooth device.
3
Select and play audio files or music on
your NFC device.
• To break the connection, tap the
NFC device with the NFC tag on this
product again.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
• A USB extension cable, if the USB storage
device does not fit into the connector.
• An MP3 or WMA file on a USB storage
device.
1
Play music via NFC
NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
• A Bluetooth device with NFC function.
• For pairing, tap the NFC device on the
NFC tag of this product.
10
EN
Connect a USB storage device to the
Surround Base.
2
Press USB on the remote control.
»» [USB] is displayed.
3
Use the remote control to control play.
Button
/
Action
Start, pause or resume play.
Skip to the previous or next track.
•• This product may not be compatible with certain types
of USB storage device.
•• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•• Digital camera PTP protocols are not supported.
•• Do not remove the USB storage device while it is
being read.
•• DRM-protected music files (MP3, WMA) are not
supported.
•• Support a USB port: 5V , 1A.
6Product
specifications
English
Note
Note
•• Specifications and design are subject to change without
notice.
Amplifier
Auto standby
When playing media from a connected device,
the Surround Base automatically switches to
standby if:
• no button is pressed for 30 minutes, or
• no audio/video play from a connected
device (except USB) for 30 minutes.
•
•
•
Apply factory settings
•
You can reset this product to the default
settings programmed at the factory.
•
1
In standby mode, press and hold button
on the main unit for at least 5 seconds
until the product powers on.
FTC total output power: 40 W
• Left: 11 W (1%THD, 4 ohm,
200 Hz - 10 kHz)
• Right: 11 W (1%THD, 4 ohm,
200 Hz - 10 kHz)
• Subwoofer: 18 W (1%THD,
4 ohm, 20 Hz - 70 Hz)
RMS total output power: 80 W RMS
(+/- 0.5 dB, 10% THD)
Frequency response:
20 Hz - 20 kHz / ±3 dB
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
Input sensitivity:
• AUX: 2 V rms
• AUDIO IN: 1 V rms
Audio
•
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
•
•
•
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
File system: FAT16, FAT32, NTFS
Maximum memory support: < 64 GB
Supports MP3 and WMA file formats
EN
11
•
•
•
Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
Version:
• WMA: V7, V8, V9
Bluetooth
••
••
Bluetooth profiles: A2DP, AVRCP
Bluetooth version: 3.0 + EDR
Main unit
••
••
••
•
•
••
••
•
••
Power supply: 120V~, 60 Hz
Power consumption: 20 W
Standby power consumption: ≤ 0.5 W
Speaker impedance: 4 ohm
Speaker drivers: 2 x racetrack mid range
(1.5" x 5") + 2 x 1" tweeter + 1 x 4"
woofer
Dimensions (WxHxD):
701 x 68 x 325 mm / 27.6” x 2.7” x 12.8”
Weight: 6.5 kg / 14.3 lbs
Operating temperature and humidity:
0°C to 45°C, 5% to 90% humidity for all
climates
Storage temperature and humidity:
-40°C to 70°C, 5% to 95%
Remote control batteries
•
1 x AAA-R03-1.5 V
7Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the Surround Base do not
work.
• Disconnect the Surround Base from the
power supply for a few minutes, then
reconnect.
Sound
No sound from Surround Base speakers.
• Connect the audio cable from your
Surround Base to your TV or other devices.
However, you do not need a separate
audio connection when the Surround Base
and TV are connected through HDMI ARC
connection.
• Reset your Surround Base to its factory
settings.
• On the remote control, select the correct
audio input.
• Make sure that the Surround Base is not
muted.
Distorted sound or echo.
• If you play audio from the TV through the
Surround Base, make sure that the TV is
muted.
12
EN
NFC
A device cannot connect with the Surround
Base.
• The device does not support the
compatible profiles required for the
Surround Base.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly.
• The Surround Base is already connected
with another Bluetooth device. Disconnect
the connected device, then try again.
A device cannot connect with this product via
NFC.
• Make sure that the device is supported by
NFC.
• Make sure that NFC is enabled on the
device (see the device' s user manual for
details).
• For pairing, tap the NFC device on the
NFC tag of this product.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move
the device closer to the Surround Base, or
remove any obstacle between the device
and the Surround Base.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move
the device closer to the Surround Base, or
remove any obstacle between the device
and the Surround Base.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the Surround
Base.
EN
13
English
Bluetooth
8Notice
This section contains the legal and trademark
notices.
Notice of compliance
This set complies with the FCC rules, Part
15. Operation is subject to the following two
conditions:
a This device may not cause harmful
interference, and
b This device must accept any interference
received, including interference that may
cause undesired operation.
FCC rules
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
•
•
•
•
14
Relocate the receiving antenna.
Increase the separation between
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
EN
FCC Radiation Exposure Statement:This
equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of
20cm between the radiator and your body.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
Warning: Changes or modifications made
to this equipment not expressly approved
by WOOX Innovations may void the FCC
authorization to operate this equipment.
Model number: PHILIPS HTL4115B/F7
Trade Name: Philips
Responsible Party:P&F USA, Inc. PO Box 2248
Alpharetta, GA 30023-2248; 1-866-310-0744
Canada:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following Two conditions: (1) this
device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the
routine evaluation limits in section 2.5 of RSS
102 and compliance with RSS-102 RF exposure,
users can obtain Canadian information on RF
exposure and compliance.
This transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter. This equipment should be
installed and operated with a minimum distance
of 20 centimeters between the radiator and
your body.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
The N Mark is a trademark of NFC Forum, Inc.
in the United States and in other countries.
17
ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company property. When a
refund is given, your product becomes the company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The company is not liable for any damage to or loss of any ,
programs data, or other information stored on any media
contained within the product, or any non-Philips product or part
not covered by this warranty. Recovery or reinstallation of
programs, data or other information is not covered under this
Limited Warranty.
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Customer Care Center at:
1-866-310-0744
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
an Authorized Service Location, (c) to a product or
a part that has been modified without written permission,
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248
16
P&F USA, Inc.
PO Box 2248 Alpharetta, GA 30023-2248
Specifications are subject to change without notice
2014 © WOOX Innovations Limited. All rights reserved.
This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further
referred to in this document as WOOX Innovations, and is the manufacturer of the product. P&F is
the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips
Shield Emblem are registered trademarks of Koninklijke Philips N.V.
HTL4115B_F7_UM_V3.0