VN289 Series
LCD Monitor
User Guide
Table of contents
Notices.......................................................................................................... iii
Safety information....................................................................................... iv
Care & Cleaning............................................................................................ v
1.1Welcome!....................................................................................... 1-1
1.2
Package contents.......................................................................... 1-1
1.3
Assembling the monitor base...................................................... 1-2
1.4
Connect cables.............................................................................. 1-2
1.4.1
Detaching the cable cover............................................... 1-2
1.4.2
Rear of the LCD monitor.................................................. 1-3
1.5
Monitor introduction..................................................................... 1-4
1.5.1
Using the Controls button ............................................... 1-4
1.5.3
QuickFit Function............................................................. 1-6
2.1
Detaching the arm/stand (for VESA wall mount)....................... 2-1
2.2
Adjusting the monitor................................................................... 2-2
3.1
OSD (On-Screen Display) menu.................................................. 3-1
3.1.1
How to reconfigure........................................................... 3-1
3.1.2
OSD Function Introduction............................................... 3-2
3.2
Specifications................................................................................ 3-9
3.3
Troubleshooting (FAQ)............................................................... 3-10
3.4
Supported Timing List................................................................ 3-11
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
ii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for energy
efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
vi
1.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2.
Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
1.1Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2
Package contents
Check your package for the following items:
LCD Monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Cord
1x VGA Cable
1x Audio Cable
1x HDMI Cable (option)
1x HDMI to DVI cable (option)
1x MHL Cable (option)
•
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor VN289 Series
1-1
1.3
Assembling the monitor base
1.
Attach the base to the arm. Beware to align the latch to the notch on
the base.
2.
The end of the arm will slightly protrude from the base. No need to
push it in.
3.
Screw the base to the arm tightly.
2
1
1
3
4
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
1.4
Connect cables
1.4.1
Detaching the cable cover
1
3
1-2
1
2
Chapter 1: Product Introduction
1.4.2
Rear of the LCD monitor
7
6
8
HDMI / MHL -1
1
1.
AC-IN port
2.
HDMI / MHL port
3.
VGA port
4.
Audio - in Port
5.
Earphone - out Port
6.
Kensington Lock
7.
Screw Holes for VESA Wall Mount
8.
Control buttons
•
2
HDMI / MHL -2
3
4 5
Flip upward the IO port cover to connect cables. After connected cables,
replace the cover and carefully push it upward to its original position with both
thumbs at both sides of the cover.
ASUS LCD Monitor VN289 Series
1-3
1.5
Monitor introduction
1.5.1
Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
Standard Mode
VGA 1920x1080@60Hz
Menu
QuickFit
Input Select
Close
Brightness
Splendid
7 6 5 4 3 2 1
1.
Power Button/Power Indicator:
•
Press this button to turn the monitor on/off.
•
The color definition of the power indicator is as the below table.
2.
Status
Description
White
ON
Amber
Standby mode
OFF
OFF
MENU Button:
•
Press this button to enter the OSD menu.
•
This is a hotkey to activate the QuickFit function designed for alignment.
•
The QuickFit function contains 6 pages of common grid patterns, paper
sizes, and photo sizes. See page 1-6 for details.
3.
1-4
1 2 3 4 5 6 7
QuickFit Button:
Chapter 1: Product Introduction
4.
Input Select Button:
•
5.
Use this hotkey to switch from VGA, HDMI / MHL-1 or HDMI / MHL-2
input signal.
Close Button
•
6.
Exit the OSD menu.
Shortcut key1
•
7.
This is a Shortcut key. The default setting is Brightness.
Shortcut key2
•
This is a Shortcut key. The default setting is Splendid.
ASUS LCD Monitor VN289 Series
1-5
1.5.3
QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3)
Photo size.
1.
Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid
2.
Paper size: Provides users to view their documents in real size on the
screen.
A4
B5
Letter
A4
B5
Letter
EXIT
3.
EXIT
Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
4x6
1-6
EXIT
3x5
2x2
8x10
5x7
Chapter 1: Product Introduction
2.1
Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use your fingers to loosen the screw located at the bottom of the
base, and remove the base from the stand.
3.
Or you may directly use a screwdriver to remove the screws that
secure the stand to the monitor, and detach the stand from the
monitor.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand while removing the screws.
1
4
3
5
2
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VN289 Series
2-1
2.2
Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling while changing its
angle.
• You can adjust the monitor’s angle from -5˚ to 20˚.
-5 ~ 20
2-2
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
Scenery mode
Color
Standard Mode
Image
Theater Mode
Input Select
Game Mode
System Setup
Night View Mode
Shortcut
sRGB Mode
Reading Mode
Darkroom Mode
1.
Press the MENU button to activate the OSD menu.
2.
Press the  and  buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3.
To select the highlighted item on the menu press the
4.
Press the  and  buttons to select the desired parameter.
5.
Press the
button to enter the slide bar and then use the  or
 buttons, according to the indicators on the menu, to make your
changes.
6.
Select the
to return to previous menu or
previous menu.
ASUS LCD Monitor VN289 Series
button.
to accept and return to
3-1
3.1.2
OSD Function Introduction
1.Splendid
This function contains eight sub-functions that you can select for
your preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
Scenery mode
Color
Standard Mode
Image
Theater Mode
Input Select
Game Mode
System Setup
Night View Mode
Shortcut
sRGB Mode
Reading Mode
Darkroom Mode
3-2
•
Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence Technology.
•
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence Technology.
•
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
•
Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence Technology.
•
Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SPLENDID™ Video Intelligence
Technology.
•
sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
•
Reading Mode: This is the best choice for book reading with SPLENDID
Video intelligence Technology.
•
Darkroom Mode: This is the best choice for a weak ambient light
environmen with SPLENDID Video intelligence Technology.
•
In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
•
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
•
In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast,
and Color Temp functions are not user-configurable.
Chapter 3: General Instruction
2.Color
Select the image color you like from this function.
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
Brightness
Color
Contract
Image
Saturation
Input Select
Color Temp.
System Setting
Skin Tone
Shortcut
•
Brightness: The adjusting range is from 0 to 100.
•
Contrast: The adjusting range is from 0 to 100.
•
Saturation: The adjusting range is from 0 to 100.
•
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and one User Mode.
•
Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
•
In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100.
ASUS LCD Monitor VN289 Series
3-3
3. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, Position (VGA only), Focus (VGA only), and Auto
Adjust (VGA only), from this main function.
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
Sharpness
Color
Trace Free
Image
Aspect Control
Input Select
VividPixel
System Setup
ASCR
Shortcut
Position
Focus
AUTO Adjust.
3-4
•
Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
•
Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
•
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”,“Overscan”.
•
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
•
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
•
Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
•
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
•
AUTO Adjust.: Automatically adjust the image to its optimized position,
clock, and phase. (Only available for VGA input.)
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
Chapter 3: General Instruction
4.
Input Select
Select the input source from VGA, HDMI / MHL-1 or HDMI / MHL-2
input signal.
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
VGA
Color
HDMI / MHL-1
Image
HDMI / MHL-2
Input Select
System Setup
Shortcut
ASUS LCD Monitor VN289 Series
3-5
5.
System Setup
Adjusts the system configuration.
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
Splendid Demo Mode
Color
Volume
Image
GamePlus
Input Select
ECO Mode
System Setup
OSD Setup
Shortcut
Language
Key Lock
More
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
Back
Color
Information
Image
Power Indicator
Input Select
Power Key Lock
System Setup
All Reset
Shortcut
•
Splendid Demo Mode: Activate the demo mode for the Splendid
function.
•
Volume: Adjust the earphone or speaker output volume level. The
adjusting range is from 0 to 100.
•
GamePlus: The GamePlus Function provides a toolkit and creates a
better gaming environment for users when playing different types of
games. Particularly, Aimpoint function is specially designed for new
gamers or beginners interested in First Person Shooter (FPS) games.
To active GamePlus:
3-6
•
Select ON to enter the GamePlus main menu.
•
Press
and
•
Press
Press
to confirm the function you choose. Press
to go off, and exit.
to select between Aimpoint and Timer function.
to go back.
Chapter 3: General Instruction
GamePlus main menu
GamePlus-Aimpoint
GamePlus
Aimpoint
Timer
(Practice Mode)
GamePlus main-Timer
GamePlus main-Timer-Position
Position
•
ECO Mode: Activate the ecology mode for power saving.
•
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
•
Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Traditional Chinese,
Simplified Chinese, Japanese, Persian, Thai, Indonesian, Poland,
Turkey, Portugal, Czech, Croatia, Hungary, Romania, and Korean.
•
Key Lock: Pressing the second button on the right for more than five
seconds to activate the key lock function.
•
More: Return the next page of System Setting.
•
Back: Return the previous page of System Setting.
•
Information: Displays the monitor information.
•
Power Indicator: Turn the power LED indicator on/off.
•
Power Key Lock: To disable / enable power key
•
All Reset: Selects “Yes” to revert all settings to the factory default mode.
ASUS LCD Monitor VN289 Series
3-7
6.Shortcut
Selecting this option allows you to set two shortcut keys.
VN289
Standard Mode VGA 1920x1080 @ 60Hz
Splendid
Shortcut 1
Splendid
Color
Shortcut 2
Brightness
Image
AUTO Adjust.
Input Select
Contrast
System Setup
Color Temp.
Shortcut
Volume
GamePlus
• Shortcut 1: User can select from “Splendid”, “Brightness”, “AUTO
Adjust.”, “Contrast”, “Color Temp.”, “Volume”, “GamePlus” and set
as shortcut key. The default setting is Brightness.
• Shortcut 2: User can select from “Splendid”, “Brightness”, “AUTO
Adjust.”, “Contrast”, “Color Temp.”, “Volume”, “GamePlus” and set
as shortcut key. The default setting is Splendid.
3-8
Chapter 3: General Instruction
3.2
Specifications
Model
VN289H
Panel Size
28” W (71.12 cm)
Max. Resolution
1920 x 1080
Brightness (Typ.)
300cd/m2
Intrisinc Contrast Ratio (Typ.)
Viewing Angle (CR≤10)
Display Colors
Response Time (Typ.)
D-Sub input
HDMI / MHL input
Power ON Consumption
Note
Speaker
Earphone
Power saving mode
Power off mode
Tilt
3000:1
178°(V); 178°(H)
16.7 M
≤5 ms (Gray to Gray)
Yes
Yes (MHL2.0)
Power on<32 W*
* Based on Energy Star 6.0 standard
Yes
Yes
< 0.5 W
< 0.5 W
-5° ~ +20°
VESA Wall Mounting
Yes (100mm x 100mm)
Phys. Dimension (WxHxD)
660.2 x 450.7 x 210 mm
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
ASUS LCD Monitor VN289 Series
732 x 561 x 150 mm
5.4 kg
8.2 kg
AC 100~240V(Built-in)
3-9
3.3
Troubleshooting (FAQ)
Problem
Power LED is not ON
Possible Solution
• Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check Power Indicator function in main menu OSD.
Select “ON” to turn on power LED.
The power LED lights amber and • Check if the monitor and the computer are in the
there is no screen image
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark
• Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
• Open main menu OSD, Execute Image / Auto
Adjust. Function (for VGA only).
• Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave • Make sure the signal cable is properly connected to
pattern is present in the image
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
3-10
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
• Open main menu OSD, Execute Image / Auto
Adjust. Function (for VGA only).
• Adjust the Phase and Clock settings via
OSD.
No sound or sound is low
• Make sure the audio cable is properly connected to
the monitor.
• Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
Chapter 3: General Instruction
3.4
Supported Timing List
VESA / IBM Modes Support Timing
Resolution
640 x 350
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
800 x 600
848 x 480
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1680 x 1050
1680 x 1050
1920 x 1080
1920 x 1080
Refresh Rate
70Hz
60Hz
67Hz
75Hz
70Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Horizontal Frequency
31.469KHz
31.469KHz
35KHz
37.5KHz
31.469KHz
35.156KHz
37.879KHz
48.077KHz
46.875KHz
31.02KHz
48.363KHz
56.476KHz
60.023KHz
67.5KHz
44.772KHz
49.702KHz
60KHz
63.981KHz
79.976KHz
47.712KHz
55.935KHz
65.29KHz
64.674KHz
67.5KHz
66.587KHz
HDMI 1.3 CEA-861 Formats Supported Timing
Resolution
640 x 480P
720 x 480P
720 x 576P
1280 x 720P
1280 x 720P
1440 x 480P
1440 x 576P
1920 x 1080i
1920 x 1080i
1920 x 1080P
1920 x 1080P
1920 x 1080P
Refresh Rate
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
59.94 / 60Hz
30HZ
50Hz
59.94 / 60Hz
Horizontal Frequency
31.469 / 31.5KHz
31.469 / 31.5KHz
31.25KHz
37.5KHz
44.955 / 45KHz
31.469 / 31.5KHz
31.25KHz
28.125KHz
33.716 / 33.75KHz
33.75KHZ
56.25KHz
67.433 / 67.5KHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
ASUS LCD Monitor VN289 Series
3-11