UB
YST-FSW150/
YST-FSW050
SUBWOOFER SYSTEM
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1
2
3
4
5
6
7
8
9
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert you to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert you
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
10
11
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
12
13
14
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
For U.K. customers
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning
storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Special Instructions for U.K. Model
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Note
Blue: NEUTRAL
Brown: LIVE
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
i En
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED.
Make sure that neither core is connected to the earth
terminal of the three pin plug.
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions found
in the users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
Limited Guarantee for European Economic Area (EEA) and Switzerland
Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from
whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our
website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).
The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha
undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge
for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been
discontinued or is considered uneconomic to repair.
Conditions
1. The original invoice or sales receipt (showing date of purchase, product code and dealer’s name) MUST accompany the defective product, along with
a statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service and
the product may be returned at the customer’s expense.
2. The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland.
3. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha.
4. The following are excluded from this guarantee:
a. Periodic maintenance and repair or replacement of parts due to normal wear and tear.
b. Damage resulting from:
(1) Repairs performed by the customer himself or by an unauthorised third party.
(2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer’s responsibility to
ensure the product is adequately packaged when returning the product for repair.
(3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha’s instructions on the
proper use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in
force in the country where it is used.
(4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control.
(5) Defects of the system into which this product is incorporated and/or incompatibility with third party products.
(6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety
standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland.
(7) Non AV (Audio Visual) related products.
(Products subject to “Yamaha AV Guarantee Statement” are defined in our website at http://www.yamaha-hifi.com/ or
http://www.yamaha-uk.com/ for U.K. resident.)
5. Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use shall apply.
6. Yamaha may not be held responsible for any losses or damages, whether direct, consequential or otherwise, save for the repair or replacement of the
product.
7. Please backup any custom settings or data, as Yamaha may not be held responsible for any alteration or loss to such settings or data.
8. This guarantee does not affect the consumer’s statutory rights under applicable national laws in force or the consumer’s rights against the dealer arising
from their sales/purchase contract.
ii En
Thank you for selecting this Yamaha subwoofer system.
CAUTION: Read this before operating your unit.
Please read the following operating precautions before use.
Yamaha will not be held responsible for any damage and/or injury
caused by not following the cautions below.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this unit in a cool, dry, clean place - away from
windows, heat sources, sources of excessive vibration, dust,
moisture and cold. Avoid sources of humming (transformers,
motors).
3 Never open the cabinet. If something drops into the set, contact
your dealer.
4 The voltage to be used must be the same as that specified on
the rear panel. Using this unit with a higher voltage than
specified is dangerous and may cause a fire and/or electric
shock.
5 To reduce the risk or fire or electric shock, do not expose this
unit to rain or moisture.
6 Do not use force on switches, controls or connection wires.
When moving the unit, first disconnect the power plug and the
wires connected to other equipment. Never pull the wires
themselves.
7 When not planning to use this unit for a long period (i.e.,
vacation, etc.), disconnect the AC power plug from the wall
outlet.
8 Since this unit has a built-in power amplifier, heat will radiate
from the bottom panel. Place the unit apart from the walls to
prevent fire or damage. Allow ventilation space of at least 10
cm on the top, 20 cm on the left and right, and 20 cm on the
back of this unit.
9 Do not cover this unit with a newspaper, a tablecloth, a curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside the unit rises, it may cause fire, damage to the unit and/
or personal injury.
10 Do not place the following objects on this unit:
- Glass, china, small metallic etc.
If glass etc. falls by vibrations and breaks, it may cause bodily
injury.
- A burning candle etc.
If the candle falls by vibrations, it may cause fire and bodily
injury.
- A vessel with water in it
If the vessel falls by vibrations and water spills, it may cause
damage to the speaker, and/or you may get an electric shock.
11 Do not place this unit where foreign objects such as water drips
might fall. It might cause a fire, damage to this unit, and/or
personal injury.
12 Never put a hand or a foreign object into the YST port located
on the front side of this unit. When moving this unit, do not
hold the port as it might cause personal injury and/or damage
to this unit.
13 Never place a fragile object near the YST port of this unit. If
the object falls or drops by the air pressure, it may cause
damage to the unit and/or personal injury.
14 Never open the cabinet. It might cause an electric shock since
this unit uses a high voltage. It might also cause personal injury
and/or damage to this unit.
15 When using a humidifier, be sure to avoid condensation inside
this unit by allowing enough spaces around this unit or
avoiding excess humidification. Condensation might cause a
fire, damage to this unit, and/or electric shock.
iii En
16 Super-bass frequencies reproduced by this unit may cause a
turntable to generate a howling sound. In such a case, move
this unit away from the turntable.
17 This unit may be damaged if certain sounds are continuously
output at high volume level. For example, if 20 Hz-50 Hz sine
waves from a test disc, bass sounds from electronic
instruments, etc. are continuously output, or when the stylus of
a turntable touches the surface of a disc, reduce the volume
level to prevent this unit from being damaged.
18 If you hear distorted noise (i.e., unnatural, intermittent
“rapping” or “hammering” sounds) coming from this unit,
reduce the volume level. Extremely loud playing of a movie
soundtrack’s low frequency, bass-heavy sounds or similarly
loud popular music passages can damage this speaker system.
19 Vibration generated by super-bass frequencies may distort
images on a TV. In such a case, move this unit away from the
TV set.
20 Do not attempt to clean this unit with chemical solvents as this
might damage the finish. Use a clean, dry cloth.
21 Be sure to read the “Troubleshooting” section regarding
common operating errors before concluding that the unit is
faulty.
22 Install this unit near the wall outlet and where the AC power
plug can be reached easily.
23 VOLTAGE SELECTOR
(For Asia and General models)
The voltage selector switch on the bottom panel of this unit
must be set for your local main voltage BEFORE plugging this
unit into the AC main supply. Voltages are:
110–120/220–240 V AC, 50/60 Hz.
24 Secure placement or installation is the owner’s
responsibility. Yamaha shall not be liable for any accident
caused by improper placement or installation of speakers.
This unit features a magnetically shielded design, but
there is still a chance that placing it too close to a TV set
might impair picture color. Should this happen, move
this unit away from the TV set.
This unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off. In this state, this unit is designed
to consume a very small quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire la lame la
plus large de la fiche dans la borne correspondante de
la prise et pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
English
Table of contents
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
CAUTION: Read this before operating your unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using the subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Advanced Yamaha Active Servo Technology II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover
Getting started
Features
Supplied accessories
• This subwoofer system employs Advanced
Yamaha Active Servo Technology II, which
Yamaha has developed to reproduce higher
quality super-bass sound (see “Advanced
Yamaha Active Servo Technology II” on page 6
for details). This super-bass sound adds a more
realistic, theater-in-the-home effect to your
stereo system.
• Yamaha’s unique and compact design let you
place this unit horizontally.
Please confirm that the following items are
included in the package.
Subwoofer cable (5 m)
Non-skid pad
(1 set, 4 pieces)
System control cable (5 m)
Stand (YST-FSW150 only)
Screw
(M4, 16 mm) x 2
(YST-FSW150 only)
1 En
Placement
The following illustrations are the setting images
of this unit.
Example 1: Using this unit with Yamaha
Digital Sound Projector
Yamaha Digital Sound Projector
y Tip
You can also place this unit vertically.
When you want to do so, fix a stand using the supplied
screws (YST-FSW150 only) and then attach pads as
shown below.
Note
When placing this unit vertically, set the bottom side
(that attached feet) of this unit toward a wall.
This unit
YST-FSW050
YST-FSW150
Foot
Upsidedown OK
Example 2: As a part of multi channel
speaker system
This unit
Upsidedown OK
y Tip
You can also place this unit in a TV rack etc.
Note
If vibrations of this unit cause abnormal noise or
sympathetic vibrations on nearby components, attach the
supplied non-skid pads to the bottoms of the feet.
Bottom view
(example: YST-FSW150)
Notes
• Do not place this unit on/under any other components
in a pile. The vibration of this unit may cause system
failure, etc. in other components.
• Keep enough ventilation space on the front, the rear,
and the bottom side (that attached feet) of this unit.
Do not place this unit on a thick carpet etc.
2 En
Non-skid
pads
Caution: Do not plug the power cables of the subwoofer and other audio/video components
into an AC outlet until you complete all the other connections.
Basic connection example
Connect the subwoofer cable to the output jack of your AV amplifier, receiver or TV and to the INPUT jack
of the subwoofer.
Flat TV (example)
Amplifier (example)
SUBWOOFER
SUBWOOFER
YST-FSW150
rear panel
INPUT
SYSTEM
CONNECTOR
YST-FSW150 rear panel
INPUT
INPUT
SYSTEM
CONNECTOR
INPUT
SYSTEM
CONNECTOR
INPUT
YST-FSW050 rear panel
YST-FSW050 rear panel
SYSTEM
CONNECTOR
INPUT
3 En
English
Connections
The system connection
This unit has a SYSTEM CONNECTOR jack.
Use the supplied system control cable when
connecting a Yamaha component equipped
with a system connector jack. When
connected, the power mode (ON, OFF/
SYSTEM) of this unit can be controlled with
the power button of the connected Yamaha
component.
Connecting the components and the
subwoofer to the AC power
After you complete a subwoofer connection, plug
the amplifier, TV and/or other audio/video
components, and the subwoofer into an AC outlet
of appropriate voltage.
YST-FSW150 rear panel
Notes
INPUT
• Set the POWER button of this unit to OFF/
SYSTEM. The power of this unit can be turned
on even when the POWER button is set to
OFF/SYSTEM.
• When the POWER button of this unit is set to
ON, the connected component will not control
the power mode of this unit, even though they
are connected via a system connection. The
power mode of this unit will always be ON.
• When this unit does not output low frequency
signals even if you use the system connection,
you need to change the setting of the connected
component. For details, refer to the manual of
the component.
SYSTEM
CONNECTOR
To AC outlet
YST-FSW050 rear panel
SYSTEM
CONNECTOR
INPUT
To AC outlet
Yamaha Digital Sound Projector (example)
VOLTAGE SELECTOR
SYSTEM
CONNECTOR
YST-FSW150 rear panel
(For Asia and General models only)
The voltage selector switch on the bottom panel of this
unit must be set for your local main voltage BEFORE
plugging this unit into the AC main supply.
Voltages are 110–120/220–240 V AC, 50/60 Hz.
VOLTAGE
SELECTOR
INPUT
SYSTEM
CONNECTOR
SYSTEM
CONNECTOR
SYSTEM
CONNECTOR
INPUT
YST-FSW050 rear panel
4 En
220V-240V
110V-120V
English
Using the subwoofer
5 INPUT terminal
POWER
OFF/SYSTEM
YST-FSW150
front panel
1
YST-FSW050
front panel
POWER
0
10
2
3
POWER
VOLUME
OFF/SYSTEM
OFF/SYSTEM
Input terminal for line level signals from the
amplifier.
VOLUME
ON
ON
0
10
0
Before you use the subwoofer, first adjust the
volume balance between the subwoofer and the
front speakers according to the procedure below.
1. Set the VOLUME control to minimum (0).
2. Turn on the power of all the other
VOLUME
ON
Pre-adjusting the subwoofer
volume
10
components.
3. Press the POWER button to the ON
5 INPUT
YST-FSW150
rear panel
INPUT
SYSTEM
CONNECTOR
position.
Turn on the power switch of the connected
component when the subwoofer is
connected using the system connection.
4. Play a source that contains low-frequency
4
sounds. Adjust the amplifier’s volume
control to the desired level.
SYSTEM
CONNECTOR
SYSTEM
CONNECTOR
INPUT
YST-FSW050
rear panel
1 Power indicator
Lights up green while the unit is turned on.
2 POWER button
Press this button to the ON position to turn on
the power of the subwoofer. Press this button to
the OFF/SYSTEM position to turn off the
power of the subwoofer or to use the system
connection (see page 4).
3 VOLUME control
Adjusts the volume level. Turn the control
clockwise to increase the volume, and
counterclockwise to decrease the volume.
5. Increase the volume gradually to adjust the
volume balance between the subwoofer
and the front speakers.
To enjoy natural bass sound, keep the subwoofer
volume at a level where it is barely
distinguishable from other speakers.
6. Adjust the volume of the entire sound
system using the amplifier’s volume control.
y Tip
It is recommended to set the VOLUME control
about in the middle position when using in a multi
channel home theater system.
VOLUME
0
10
4 SYSTEM CONNECTOR terminal
Used for system connection. See “The system
connection” on page 4 for details.
5 En
Advanced Yamaha Active Servo Technology II
In 1998, Yamaha brought to the marketplace
speaker systems utilizing YST (Yamaha Active
Servo Technology) to give powerful, high quality
bass reproduction. This technique uses a direct
connection between the amplifier and speaker,
allowing accurate signal transmission and precise
speaker control.
As this technology uses speaker units controlled by
the negative impedance drive of the amplifier and
resonance generated between the speaker cabinet
volume and port, it creates more resonant energy
(the “air woofer” concept) than the standard bass
reflex method. This allows for bass reproduction
from much smaller cabinets than was previously
possible.
Yamaha’s newly developed Advanced YST II, with
many refinements to Yamaha Active Servo
Technology, allows better control of the forces
driving the amplifier and speakers. From the
amplifier’s point of view, the speaker impedance
changes depending on the sound frequency.
Yamaha developed a new circuit design combining
negative-impedance and constant-current drives,
which provides a more stable performance and
clear bass reproduction with less murkiness.
Cabinet
High-amplitude
bass sound
Air woofer
(Helmholtz resonator)
Port
Signals
Active Servo Processing
Amplifier
Advanced
impedance
Converter
Signals of low
amplitude
6 En
Refer to the chart below if the unit does not function properly. If the problem you are experiencing is not
listed, or if the instructions fail to help you resolve the problem, disconnect the power cable and contact your
authorized Yamaha dealer or service center.
Problem
Cause
Power is not supplied even though
the POWER button is set to the ON
position.
The power plug is not securely connected.
Turn the POWER button to OFF/
SYSTEM, and then connect the power
plug securely.
No sound.
The VOLUME control is set to (0).
Turn up the volume.
A subwoofer cable is not connected
securely.
Connect a subwoofer cable securely.
You are playing a sound source that
includes inadequate bass frequencies.
Play a sound source that includes more
bass frequencies.
The sound level has been diminished by
standing waves.
Reposition the subwoofer, or break up the
parallel wall surface by placing
bookshelves or other large objects along
the wall.
The input signal is too small.
Turn up the volume.
No signal from the subwoofer output
terminal of the component.
Check the speaker mode setting on the
component.
Sound level is too low.
Remedy
7 En
English
Troubleshooting
Specifications
Type ....... Advanced Yamaha Active Servo Technology II
Driver ..............................................16 cm (6-5/16”)
Magnetically shielded type
Output Power
YST-FSW150 ................. 75 W (5 Ω, 10% T.H.D.)
YST-FSW050 ................. 50 W (5 Ω, 10% T.H.D.)
Dynamic Power
YST-FSW150 .................................... 130 W, 5 Ω
YST-FSW050 .................................... 100 W, 5 Ω
Frequency characteristics
YST-FSW150
100 dB
90
80
70
Input Impedance ...............................................12 kΩ
60
Frequency Response
YST-FSW150 ............................. 30 Hz – 160 Hz
YST-FSW050 ............................. 35 Hz – 160 Hz
50
40
20
Input Sensitivity
YST-FSW150 ............ 100 mV (50 Hz, 75 W/5 Ω)
YST-FSW050 .............. 50 mV (50 Hz, 50 W/5 Ω)
Power Supply
[U.S.A. and Canada models]..... AC 120 V, 60 Hz
[Australia model] ....................... AC 240 V, 50 Hz
[China model]............................ AC 220 V, 50 Hz
[Korea model]............................ AC 220 V, 60 Hz
[U.K. and Europe models] ......... AC 230 V, 50 Hz
[Asia and General models]
...................... AC 110–120/220–240 V, 50/60 Hz
Power Consumption
YST-FSW150 ..............................................70 W
YST-FSW050 ..............................................40 W
50
100
200
500 Hz
Frequency response graph*
YST-FSW050
100 dB
90
80
70
60
50
Dimensions (W x H x D)
YST-FSW150 ........435 mm x 151 mm x 350 mm
(17-2/16 in x 5-15/16 in x 13-12/16 in)
YST-FSW050 ........350 mm x 163 mm x 350 mm
(13-12/16 in x 6-7/16 in x 13-12/16 in)
*This diagram does not depict actual frequency
response characteristics accurately.
Weight
YST-FSW150 ....................9.4 kg (20 lbs. 12 oz.)
YST-FSW050 ....................8.5 kg (18 lbs. 12 oz.)
This symbol mark is according to the
EU directive 2002/96/EC.
Specifications are subject to change without notice.
40
20
50
100
200
500 Hz
Frequency response graph*
This symbol mark means that electrical
and electronic equipment, at their endof-life, should be disposed of separately
from your household waste.
Please act according to your local rules
and do not dispose of your old products
with your normal household waste.
© 2007
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
All rights reserved.
Printed in Indonesia
WM03460