Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
HTB3520
HTB3550
HTB3580
Contents
1Important
2
Safety2
Care for your product
3
Care of the environment
3
3D health warning
3
2 Your home theater
4
Main unit
4
Remote control
5
Connectors6
3 Connect and set up
7
Connect speakers
7
Connect to TV
8
Connect audio from TV and other devices9
Set up speakers
10
Set up EasyLink (HDMI-CEC control) 10
Connect and set up a home network 11
4 Use your home theater
13
Access the home menu
13
Discs13
Play audio through Bluetooth
15
Connect Bluetooth via NFC
15
Data files
16
USB storage devices
17
Audio, video, and picture options
17
Radio18
External audio device
19
Browse Smart TV
19
Browse PC through DLNA
20
Choose sound
22
5 Change settings
24
24
24
24
25
25
25
25
26
Language settings
Picture and video settings
Audio settings
Parental control settings
Display settings
Energy saving settings
Speaker settings
Restore default settings
6 Update software
26
Check software version
26
Update software through USB
26
Update software through the Internet 27
7 Product specifications
28
8Troubleshooting
32
9Notice
34
Copyright34
Open source software
35
Compliance35
Trademarks35
10 Language code
37
11Index
38
EN
1
1Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Safety
Risk of electric shock or fire!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
• Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
2
EN
Risk of injury or damage to the home theater!
• For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident,
injury or damage.
• For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside
the disc compartment.
• Parts of this product can be made of
glass. Handle with care to avoid injury and
damage.
Risk of overheating!
• Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
• If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
Care for your product
•
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
Use only microfiber cloth to clean the
product.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
3D health warning
•
If you or your family has a history of
epilepsy or photosensitive seizures, consult
a medical professional before exposing
yourself to flashing light sources, rapid
image sequences or 3D viewing.
EN
3
•
•
To avoid discomfort such as dizziness,
headache or disorientation, we
recommend not watching 3D for extended
periods of time. If you experience any
discomfort, stop watching 3D and do
not immediately engage in any potentially
hazardous activity (for example driving a
car) until your symptoms have disappeared.
If symptoms persist, do not resume
watching 3D without consulting a medical
professional first.
Parents should monitor their children
during 3D viewing and ensure they do not
experience any discomfort as mentioned
above. Watching 3D is not recommended
for children under six years of age as their
visual system is not fully developed yet.
2 Your home
theater
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers(e.g. notification
of product software upgrade), register your
product at www.philips.com/welcome.
Main unit
This section includes an overview of the main
unit.
a b c de f
a (Open/Close)
Open or close the disc compartment.
b
(Play/Pause)
Start, pause or resume play.
c
(Stop)
Stop play.
d SOURCE
Select an audio or video source for the
home theater.
e + (Volume)
Decrease or increase volume.
f
4
EN
(Standby-On)
Switch the home theater on or to standby.
b SOURCE
Select a source: Radio/HDMI ARC/AUX/
OPTICAL/COAXIAL/AUDIO IN for the
home theater.
Remote control
This section includes an overview of the
remote control.
c
(Home)
Access the home menu.
a
d SMART TV
Access online Smart TV service.
b
e DISC MENU
• Switch to disc source.
• Access or exit the disc menu or popup menu when you play a disc.
c
d
x
e
w
f
g
h
i
j
k
l
m
n
v
g OK
Confirm an entry or selection.
u
t
h
s
i Color buttons
Select tasks or options for Blu-ray discs.
o
• Return to a previous menu screen.
• In radio mode, press and hold to erase
the current preset radio stations.
j (Open/Close)
Open or close the disc compartment.
p
q
a
f Navigation buttons
• Navigate menus.
• In radio mode, press left or right to
start auto search.
• In radio mode, press up or down to
tune the radio frequency.
k
(Play)
Start or resume play.
l
/ (Previous/Next)
• Skip to the previous or next track,
chapter or file.
• In radio mode, select a preset radio
station.
m
/
(Fast Backward / Fast Forward)
Search backwards or forward. Press
repeatedly to change the search speed.
n
(Mute)
Mute or restore volume.
r
(Standby-On)
• Switch the home theater on or to
standby.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
EN
5
o +/- (Volume)
Increase or decrease volume.
b
p Alphanumeric buttons
Enter values or letters (using SMS style
entry).
q SUBTITLE
Select subtitle language for video.
(USB)
• Audio, video or picture input from a
USB storage device.
• Connect a USB mass storage to rent
online video or to access BD-Live.
Rear connectors
r AUDIO
Select an audio language or channel.
s
t
u
v
ih
Access or exit sound options.
3
(Pause)
Pause play.
3
a b
3
c
d e fg
a AC MAINS~
Fixed AC power cable.
Stop play.
• Access more play options while playing
a disc or a USB storage device.
• In radio mode, set a radio station.
w TOP MENU
Access the main menu of a disc.
x
3
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c WIRELESS REAR AUDIO
Connect to a Philips wireless module
(Model: Philips RWSS5512, sold separately).
d COAXIAL IN
Connect to a coaxial audio output on the
TV or a digital device.
Switch to Bluetooth mode.
Connectors
This section includes an overview of the
connectors available on your home theater.
Front connectors
e DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
f LAN
Connect to the LAN input on a
broadband modem or router.
g FM ANTENNA
Connect to the supplied FM antenna.
h HDMI OUT (ARC)
Connect to the HDMI input on the TV.
ab
a AUDIO IN
Audio input from an external audio device
(3.5mm jack).
6
EN
i AUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
3 Connect and set
up
SUB
WOOFER
FRONT
LEFT
FRONT
CENTER
FRONT
RIGHT
This section helps you connect your home
theater to a TV and other devices, and then set
it up.
For information about the basic connections
of your home theater and accessories, see the
quick start guide.
REAR
LEFT
Note
•• For identification and supply ratings, see the type plate
at the back or bottom of the product.
•• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
REAR
RIGHT
* The actual speaker shapes may vary from the
illustration above.
Note
Connect speakers
The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting
up a surround sound effect. For best effect,
position all the speakers towards the seating
position and place them close to your ear level
(seated).
•• Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.
Follow these general guidelines for speakers
placement.
1
2
3
4
Seating position:
This is the center of your listening area.
FRONT CENTER (front center) speaker:
Place the center speaker directly in front of
the seating position, either above or below
your TV.
FRONT LEFT (front left) and FRONT
RIGHT (front right) speakers:
Place the left and right speakers in the
front, and at equal distance from the center
speaker. Make sure that the left, right, and
the center speakers are at equal distance
from your seating position.
REAR LEFT (rear left) and REAR RIGHT
(rear right) speakers:
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
EN
7
5
SUBWOOFER (subwoofer):
Place the subwoofer at least one meter
to the left or right of the TV. Leave about
10-centimeter clearance from the wall.
Make your rear speakers wireless
Connect the rear speakers to your home
theater wirelessly using a wireless module
accessory. For details, see the wireless module
user manual.
What you need
• A Philips wireless module. (Model: Philips
RWSS5512, sold separately)
1
Connect the wireless transmitter to the
WIRELESS REAR AUDIO connector on
your home theater.
Connect to TV
Connect your home theater to a TV to watch
videos. You can listen to the TV audio through
your home theater speakers.
Use the best quality connection available on
your home theater and TV.
Option 1: Connect to TV through
HDMI (ARC)
Best quality video
Your home theater supports HDMI version
with Audio Return Channel (ARC). If your TV
is HDMI ARC compliant, you can hear the TV
audio through your home theater by using a
single HDMI cable.
TV
2
3
Connect the rear speakers to the wireless
receiver.
1
Connect the wireless receiver to the
power supply.
2
8
EN
Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on
your home theater to the HDMI ARC
connector on the TV.
• The HDMI ARC connector on the TV
might be labeled differently. For details,
see the TV user manual.
On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
• HDMI-CEC is a feature that enables
CEC compliant devices that are
connected through HDMI to be
controlled by a single remote control,
such as volume control for both the
TV and the home theater. (see 'Set
up EasyLink (HDMI-CEC control)' on
page 10)
3
If you cannot hear the TV audio through
your home theater, set up the audio
manually. (see 'Set up the audio' on page
11)
Option 2: Connect to TV through
standard HDMI
Best quality video
If your TV is not HDMI ARC compliant, connect
your home theater to the TV through a
standard HDMI connection.
TV
Note
•• If your TV has a DVI connector, you can use an HDMI/
DVI adapter to connect to TV. However, some of the
features may not be available.
Connect audio from TV and
other devices
Play audio from TV or other devices through
your home theater speakers.
Use the best quality connection available on
your TV, home theater, and other devices.
Note
•• When your home theater and TV are connected
1
2
3
4
Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your
home theater to the HDMI IN connector
on the TV.
Connect an audio cable to hear the TV
audio through your home theater (see
'Connect audio from TV and other devices'
on page 9).
On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
• HDMI-CEC is a feature that enables
CEC compliant devices that are
connected through HDMI to be
controlled by a single remote control,
such as volume control for both the
TV and the home theater. (see 'Set
up EasyLink (HDMI-CEC control)' on
page 10)
If you cannot hear the TV audio through
your home theater, set up the audio
manually. (see 'Set up the audio' on page
11)
through HDMI ARC, an audio connection is not
required (see 'Option 1: Connect to TV through HDMI
(ARC)' on page 8).
Option 1: Connect audio through a
digital optical cable
Best quality audio
TV
1
Using an optical cable, connect the
DIGITAL IN-OPTICAL connector on
your home theater to the OPTICAL OUT
connector on the TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
EN
9
Option 2: Connect audio through a
digital coaxial cable
Set up speakers
Good quality audio
Set up the speakers manually to experience
customized surround sound.
Before you start
Make the necessary connections described in
the quick start guide, and then switch the TV to
the correct source for your home theater.
1
Using a coaxial cable, connect the
COAXIAL IN connector on your home
theater to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUDIO
IN-AUX connectors on your home
theater to the AUDIO OUT connectors
on the TV or other device.
VCR
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Audio] > [Speaker setup].
Enter the distance for each speaker, and
then listen to the test tones and change
the volume. Experiment with the speaker
positions to find the ideal setting.
Set up EasyLink (HDMI-CEC
control)
This home theater supports Philips EasyLink,
which uses the HDMI-CEC (Consumer
Electronics Control) protocol. EasyLinkcompliant devices that are connected through
HDMI can be controlled by a single remote
control.
Note
•• Depending on the manufacturer, HDMI-CEC is known
by many names. For information on your device, see
the user manual of the device.
•• Philips does not guarantee 100% interoperability with
all HDMI-CEC devices.
Before you start
• Connect your home theater to the HDMICEC compliant device through HDMI
connection.
• Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
10
EN
Enable EasyLink
Set up the audio
1
2
3
4
If you cannot hear the audio output of a
connected device through your home theater
speakers, do the following:
• Check that you have enabled EasyLink
on all the devices, (see 'Set up EasyLink
(HDMI-CEC control)' on page 10) and
• on your TV, set the audio output to
"Amplifier" (instead of TV speakers). For
details, see the TV user manual, and
• setup the EasyLink audio control.
Press
(Home).
Select [Setup], and then press OK.
Select [EasyLink] > [EasyLink] > [On] .
On your TV and other connected devices,
turn on HDMI-CEC control. For details, see
the user manual of the TV or other devices.
• On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.
EasyLink controls
With EasyLink, you can control your home
theater, TV, and other connected HDMI-CEC
compliant devices with a single remote control.
• [One Touch Play] (One-touch play): When
a video disc is in the disc compartment,
press (Play) to wake up the TV from
standby, and then play a disc.
• [One Touch Standby] (One-touch
standby): If one-touch standby is enabled,
your home theater can switch to standby
with the remote control of the TV or other
HDMI-CEC devices.
• [System Audio Control] (System audio
control): If system audio control is enabled,
the audio of the connected device is
output through your home theater
speakers automatically when you play the
device.
• [Audio Input Mapping] (Audio input
mapping):If system audio control does not
work, map the connected device to the
correct audio input connector on your
home theater. (see 'Set up the audio' on
page 11)
Note
•• To change the EasyLink control settings, press
(Home), select [Setup] > [EasyLink].
1
2
3
4
5
Press
(Home).
Select [Setup], and then press OK.
Select [EasyLink] > [System Audio
Control] > [On].
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
Select [EasyLink] > [Audio Input
Mapping].
Follow the onscreen instructions to map
the connected device to the audio inputs
on your home theater.
• If you connect your home theater
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input on
your home theater.
Connect and set up a home
network
Connect your home theater to a network
router for a network setup, and enjoy:
• Streamed multimedia content (see 'Browse
PC through DLNA' on page 20)
• Smart TV (see 'Browse Smart TV' on page
19)
• BD Live applications (see 'BD-Live on Bluray' on page 14)
• Software update (see 'Update software
through the Internet' on page 27)
EN
11
6
Caution
•• Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
Before you start
• For Smart TV and software updates, make
sure that the network router has access to
the Internet with high-speed connection
and is not restricted by firewalls or other
security systems.
• Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Set up the wired network
What you need
• A network cable (RJ45 straight cable).
• A network router (with DHCP enaled). LAN
www
1
2
3
4
5
12
Using a network cable, connect the LAN
connector on your home theater to the
network router.
Press
(Home).
Select [Setup], and then press OK.
Select [Network] > [Network
installation] > [Wired (Ethernet)].
Follow the onscreen instructions to
complete the setup.
• If connection fails, select [Retry], and
then press OK.
EN
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
network settings].
Personalize the network name
Name your home theater to easily identify it on
your home network.
1
2
3
4
5
Press
(Home).
Select [Setup], and then press OK.
Select [Network] > [Name your
Product:].
Press the Alphanumeric buttons to enter
the name.
Select [Done], and then press OK to exit.
4 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Complete the first-time setup. First-time
setup appears when you turn on your
home theater for the first time or if you do
not complete the setup.
• Switch the TV to the correct source for
your home theater (for example, HDMI,
AV IN).
Access the home menu
The home menu provides easy access to
connected devices, setup and other useful
features in your home theater.
1
2
3
Press (Home).
»» The home menu is displayed.
Press the Navigation buttons and OK to
select the following:
• [Play disc]: Start disc play.
• [Browse USB]: Access the USB
content browser.
• [Smart TV]: Access Smart TV.
• [Browse PC]: Access the computer
content browser.
• [Setup]: Access menus to change video,
audio and other settings.
Press
(Home) to exit.
Discs
Your home theater can play DVDs, VCDs, CDs,
and Blu-ray discs. It can also play discs that
you’ve made at home, such as CD-R discs of
photos, videos, and music.
1
2
Insert a disc into the home theater.
If the disc does not play automatically, press
DISC MENU to select disc source, or
select [Play disc] from the home menu.
3
Use the remote control to control play.
• It is normal to hear a little noise when
you play a Blu-ray disc. This does not
mean that your home theater is faulty.
Play buttons
Button
Action
Navigation
buttons
Navigate menus.
Up/Down: Rotate the picture
clockwise or counter-clockwise.
Left/Right: Skip to the previous or
next picture.
Confirm an entry or selection.
Start or resume play.
Pause play.
Stop play.
Skip to the previous or next track,
chapter or file.
Search fast backwards or forward.
Search slow forward.
Select an audio language or
channel.
Select subtitle language for video.
Access or exit the disc menu.
OK
(Play)
/
/
AUDIO
SUBTITLE
DISC
MENU
Access the advanced options
when you play your audio, video,
or media files. (see 'Audio, video,
and picture options' on page 17)
EN
13
Synchronize video and sound
Bonus View on Blu-ray
If the audio and video are not synchronized,
delay the audio to match the video.
On Blu-ray discs that support the Bonus View,
enjoy extra content such as commentaries in a
small screen window. Bonus View is also known
as picture-in-picture.
1
2
3
4
Press .
Press the Navigation buttons (left/right) to
select [Audio sync], and then press OK.
Press the Navigation buttons (up/down)
to synchronize the audio with the video.
Press OK to confirm.
1
2
3
Play Blu-ray 3D disc
Your home theater can play Blu-ray 3D video.
Read the 3D health warning before playing a
3D disc.
What you need
• A 3D TV
• A pair of 3D glasses that are compatible
with your 3D TV
• A 3D Blu-ray video
• A high speed HDMI cable
1
2
3
Using the high speed HDMI cable, connect
your home theater to a 3D compatible TV.
Make sure that the 3D video setting is
enabled. Press (Home), select [Setup] >
[Video] > [Watch 3D video] > [Auto].
• To play 3D discs in 2D mode, select
[Off].
Play a Blu-ray 3D disc and put on the 3D
glasses.
• During video search and in certain play
modes, the video is displayed in 2D.
The video display returns to 3D when
you resume play.
Note
•• To avoid flickering, change the brightness of the display.
14
EN
4
5
Enable Bonus View in the Blu-ray disc
menu.
While you play the movie, press .
»» The options menu is displayed.
Select [PIP selection] > [PIP].
• Depending on the video, PIP menu [1]
or [2] is displayed.
• To disable Bonus View, select [Off].
Select [2nd audio language] or [2nd
subtitle language].
Select the language, and then press OK.
BD-Live on Blu-ray
Access additional features on the Blu-ray discs
with BD-Live content, such as internet chats
with the director, the latest movie trailers,
games, wallpaper, and ringtones.
BD-Live services and content vary from disc to
disc.
What you need
• Blu-ray disc with BD-Live content
• a USB storage device, with at least 1 GB of
memory
1
2
3
Connect your home theater to a home
network with Internet access (see
'Connect and set up a home network' on
page 11).
Connect a USB storage device to the
(USB) connector at the front of your
home theater for BD-Live download.
Press (Home) and select [Setup] >
[Advanced] > [BD-Live security] > [Off].
• To disable BD-Live, select [On].
4
5
Select the BD-Live icon in the disc menu,
and then press OK.
»» BD-Live starts to load. The loading
time depends on the disc and your
internet connection.
Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
option.
4
Note
•• To clear the memory on the storage device, press
(Home), select [Setup] > [Advanced] > [Clear
memory].
5
Play audio through Bluetooth
Through Bluetooth, connect the home theater
with your Bluetooth device (such as an iPad,
iPhone, iPod touch, Android phone, or laptop), and
then you can listen to the audio files stored on the
device through your home theater speakers.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 2.1 + EDR.
• The operational range between the
home theater and a Bluetooth device is
approximately 10 meters (30 feet).
1
2
3
Press to select Bluetooth mode.
»» BT is displayed on the display panel.
On the Bluetooth device, switch on
Bluetooth, search for and select the name
of your home theater to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
• If prompted for a password, enter
"0000".
Wait until the speakers of home theater
beep.
»» When the Bluetooth connection
succeeds, BT READY is displayed on
the display panel for two seconds, and
then the display comes back to BT.
»» If the connection fails, no beep sound
is heard from the home theater, and
BT is always displayed on the display
panel .
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused.
• If music streaming is interrupted, place
the Bluetooth device closer to the
home theater.
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•• The music streaming may be interrupted by obstacles
between the device and home theater, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•• If you want to connect your home theater with another
Bluetooth device, press and hold on the remote
control to disable the currently connected Bluetooth
device.
•• Philips does not guarantee 100% compatibility with all
Bluetooth devices.
Connect Bluetooth via NFC
NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
• A Bluetooth device with NFC function.
• For pairing, tap the NFC device onto the
NFC tag of the home theater.
1
Enable NFC on the Bluetooth device (see
the device' s user manual for details).
EN
15
2
3
Tap the NFC device onto the NFC tag of
the home theater until the speakers of the
home theater beep.
»» When the Bluetooth connection
succeeds, BT READYis displayed on
the display panel for two seconds, and
then the display comes back to BT.
»» If the connection fails, no beep sound is
heard from the home theater, and BT
always displayed on the display panel.
Select and play audio files or music on
your NFC device.
• To break the connection, tap again the
NFC device onto the NFC tag on the
home theater.
Data files
Your home theater can play pictures, audio and
video files contained in a disc or a USB storage
device. Before you play a file, check that the file
format is supported by your home theater (see
'File formats' on page 28).
1
2
Play the files from a disc or USB storage
device.
To stop play, press .
• To resume the video from where you
stopped, press (Play).
• To play the video from the start, press
OK.
Note
Subtitles
If your video has subtitles in multiple languages,
select a subtitle language.
Note
•• Make sure that the subtitle file has the exact same
name as the video file. For example, if the video file is
named 'movie.avi', name the subtitle file as 'movie.srt'
or 'movie.sub'.
•• Your home theater supports the following file formats:
.srt, .sub, .txt, .ssa, .ass, smi, and .sami. If the subtitles do
not appear correctly, change the character set.
1
2
3
4
While playing video, press SUBTITLE to
select a language.
For DivX videos, if the subtitles do not
appear correctly, continue the following
steps to change the character set.
Press .
»» The options menu is displayed.
Select [Character set], and then select a
character set that supports the subtitle.
Europe, India, LATAM, and Russia
Character
Set
Language
[Standard]
English, Albanian, Danish,
Dutch, Finnish, French, Gaelic,
German, Italian, Kurdish (Latin),
Norwegian, Portuguese, Spanish,
Swedish and Turkish
Albanian, Croat, Czech, Dutch,
English, German, Hungarian, Irish,
Polish, Romanian, Slovak, Slovene
and Serbian
Bulgarian, Belorussian, English,
Macedonian, Moldavian, Russian,
Serbian and Ukrainian
Greek
Estonian, Latvian and Lithuanian
Simplified Chinese
Traditional Chinese
[Central
Europe]
•• To play DivX DRM protected files, connect your home
theater to a TV through an HDMI cable.
[Cyrillic]
[Greek]
[Baltic]
[Chinese]
[ChineseTraditional]
[Korean]
16
EN
English and Korean
VOD code for DivX
Before you purchase DivX videos and play
them on your home theater, register the home
theater on www.divx.com using the DivX VOD
code.
1
2
3
Press
(Home).
Select [Setup], and then press OK.
Select [Advanced] > [DivX® VOD Code].
»» The DivX VOD registration code for
your home theater is displayed.
Audio, video, and picture
options
Use advanced features when you play pictures,
audio and video files from a disc or a USB
storage device.
Audio options
While playing audio, repeat an audio track, a
disc, or a folder.
1
USB storage devices
Enjoy pictures, audio, and video stored on a
USB storage device such as an MP4 player or
digital camera.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
• A media file in one of the supported file
formats (see 'File formats' on page 28).
•• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
1
2
3
4
5
Connect a USB storage device to the
(USB) connector on your home theater.
Press
Video options
While watching video, select options such
as subtitles, audio language, time search, and
picture settings. Depending on the video source,
some options are not available.
1
Note
(Home).
Select [Browse USB], and then press OK.
»» A content browser is displayed.
Select a file, and then press OK.
Press the play buttons to control play (see
'Play buttons' on page 13).
Press repeatedly to cycle through the
following functions:
• Repeat the current track or file.
• Repeat all the tracks on the disc or the
folder.
• Turn off the repeat mode.
• Repeat the tracks randomly.
2
Press .
»» The video options menu is displayed.
Press the Navigation buttons and OK to
select and change:
• [Info]: Display information about what
is playing.
• [Audio language]: Select audio
language for video.
• [Subtitle language]: Select subtitle
language for video.
• [Subtitle shift]: Change the subtitle
position on the screen.
• [Character set]: Select a character set
that supports the DivX subtitle.
• [Time search]: Skip to a specific part
of the video by entering the time of
the scene.
• [2nd audio language]: Select the
second audio language for Blu-ray
video.
EN
17
• [2nd subtitle language]: Select the
second subtitle language for Blu-ray
video.
• [Titles]: Select a specific title.
• [Chapters]: Select a specific chapter.
• [Angle list]: Select a different camera
angle.
• [Menus]: Display the disc menu.
• [PIP selection]: Display Picture-inPicture window when playing a Blu-ray
disc that supports the Bonus View.
• [Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
• [Repeat]: Repeat a chapter or title.
• [Repeat A-B]: Mark two points within a
chapter or track to repeat play, or turn
off the repeat mode.
• [Picture settings]: Select a predefined
color setting.
Picture options
While viewing a picture, zoom into the picture,
rotate it, add animation to a slideshow, and
change the picture settings.
1
2
18
Press .
»» The picture options menu appears.
Press the Navigation buttons and OK to
select and change the following settings:
• [Info]: Display picture information.
• [Rotate +90]: Rotate the picture 90
degree clockwise.
• [Rotate -90]: Rotate the picture 90
degree counter-clockwise.
• [Zoom]: Zoom into a video scene or
picture. Press the Navigation buttons
(left/right) to select a zoom factor.
• [Duration per slide]: Select the display
speed for each picture in a slide show.
• [Slide animation]: Select animation for
the slide show.
• [Picture settings]: Select a predefined
color setting.
• [Repeat]: Repeat a selected folder.
EN
Musical slideshow
If the picture and audio files are from the same
disc or USB storage device, you can create a
musical slideshow.
1
2
3
4
5
Select an audio track, and then press OK.
Press
, and go to the picture folder.
Select a picture, and then press
start the slideshow.
Press
to stop slideshow.
Press
again to stop music.
(Play) to
Note
•• Make sure that the picture and audio formats are
supported by your home theater (see 'File formats' on
page 28).
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
•• AM and digital radio are not supported.
•• If no stereo signal is detected, you are prompted to
install the radio stations again.
1
2
Connect the FM antenna to the FM
ANTENNA on your home theater.
• For the best reception, place the
antenna away from your TV or other
sources of radiation.
Press SOURCE repeatedly to switch to
radio source.
»» If you have already installed the radio
stations, the last channel that you
listened to is played.
»» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
the display panel. Press (Play) to
install radio stations.
3
Use the remote control to listen or to
change radio stations.
Play buttons
Button
Action
/
or
Alphanumeric
buttons
Navigation
buttons
Select a preset radio station.
SUBTITLE
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
Press and hold to erase the
preset radio station.
Manual:
1) Press .
2) Press / to select your
preset.
3) Press again to store the
radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Toggle between the stereo
and mono sounds.
External audio device
Connect an external audio device to play audio
files.
What you need
• An external audio device with 3.5mm jack.
• A 3.5mm stereo audio cable.
1
2
3
Using the 3.5mm stereo audio cable,
connect the external audio device to
AUDIO IN the connector on your home
theater.
Press SOURCE repeatedly until AUDIO
IN appears on the display panel.
Press the buttons on the external audio
device to select and play audio files.
Browse Smart TV
Use Smart TV to access variety of internet
applications and specially adapted internet
websites.
For interactive discussions on Smart
TV services, visit the Smart TV forum at
www.supportforum.philips.com
Note
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz.
1
2
3
Press SOURCE repeatedly to switch to
radio source.
•• Koninklijke Philips Electronics N.V. bears no
responsibility for content provided by Smart TV service
providers.
1
Press .
Press and hold (Play) to toggle between
50 kHz or 100 kHz.
2
3
4
Connect your home theater to a home
network with high-speed Internet access
(see 'Connect and set up a home network'
on page 11).
Press
(Home).
Select [Smart TV], and then press OK.
Follow the onscreen instructions to
confirm the onscreen message.
»» The Smart TV home page is displayed.
EN
19
5
Use the remote control to select
applications and enter text (for example,
web URL, passwords, etc).
Navigate Smart TV
Button
Action
Navigation
buttons
OK
Select an application or
navigate.
Confirm an entry or selection.
Return to the previous page.
Delete a character in any text
entry box.
Enter characters in the text
entry box.
Exit Smart TV portal and
return to home menu.
Alphanumeric
buttons
(Home)
Clear browsing history
Clear the browsing history to remove
passwords, cookies, and browsing data from
your home theater.
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Network] > [Clear Smart TV
memory].
Press OK to confirm.
Rent online video
The function is only available in Smart TV
service that has the VOD feature.
Rent videos from online stores, through your
home theater. You can watch them right away
or later.
Many online video stores offer a huge choice of
video, with different rental prices, periods, and
conditions. For some stores, you must create an
account before you can rent.
What you need
• a USB storage device, with at least 8 GB of
memory
20
EN
1
2
3
4
5
6
7
Connect your home theater to a home
network with high-speed Internet access
(see 'Connect and set up a home network'
on page 11).
Insert a blank USB storage device into the
connector of your home theater.
Press
(Home).
Select [Smart TV], and then press OK.
»» The online services available in your
country are displayed.
Select a video store, and then press OK.
Follow the onscreen instructions to rent
or watch a video. If prompted, enter the
necessary information to register or log in
to the store's account.
»» The video is downloaded to your USB
storage device. You can watch it only
on your home theater.
Press the playback buttons to control play
(see 'Play buttons' on page 13).
• If you cannot play a video, check the
file format to make sure that it is
supported by your home theater (see
'File formats' on page 28).
Browse PC through DLNA
Access and play the pictures, audio and video
files from a computer or media server on the
home network through your home theater.
Before you start
• Install a DLNA-compliant media server
application on your device. Make sure that
you download an application that works
best for you. For example,
• Windows Media Player 11 or higher
for PC
• Twonky Media Server for Mac or PC
• Enable media sharing of files. For ease of
use, we have included the steps for the
following applications:
• Windows Media Player 11 (see
'Microsoft Windows Media Player 11'
on page 21)
• Windows Media Player 12 (see
'Microsoft Windows Media Player 12'
on page 21)
• Twonky Media for Mac (see 'Macintosh
OS X Twonky Media (v4.4.2)' on page
22)
5
6
Note
•• For additional help on these applications or other
media servers, check the user manual of the media
server software software.
Set up media server software
To enable media sharing, set up the media
server software.
Before you start
• Connect your home theater to a home
network. For better video quality, use wired
connection whenever possible.
• Connect the computer and other DLNAcompatible devices to the same home
network.
• Make sure that your PC firewall allows
you to run Media Player programs (or
the firewall’s exemption list has the media
server software included).
• Switch on your computer and the router.
7
8
3
4
Start Windows Media Player on your PC.
Click the Library tab, and then select
Media Sharing.
The first time you select Media Sharing on
your PC,a pop-up screen appears. Check
the Share my media box and click OK.
»» The Media Sharing screen is displayed.
In the Media Sharing screen, make sure
that you see a device marked as Unknown
Device.
»» If you don't see an unknown device
after a minute or so, check that
your PC firewall is not blocking the
connection.
By default, Windows Media Player shares
from these folders: My Music, My Pictures,
and My Videos. If your files are in other
folders, select Library > Add to Library.
»» The Add to Library screen is displayed.
• If necessary, select Advanced options
to display a list of monitored folders.
Select My folders and those of others I
can access, and then click Add.
Follow the onscreen instructions to add
the other folders that contain your media
files.
Microsoft Windows Media Player 12
1
2
3
4
Microsoft Windows Media Player 11
1
2
Select the unknown device and click Allow.
»» A green tick appears next to the
device.
5
6
Start Windows Media Player on your PC.
In Windows Media Player, click the Stream
tab, and then select Turn on media
streaming.
»» The Media streaming options screen
is displayed.
Click Turn on media streaming.
»» You return to Windows Media Player
screen.
Click the Stream tab and select More
streaming options.
»» The Media streaming options screen
is displayed.
Make sure that you see a media program
in the Local network screen.
»» If you don't see a media program,
check that your PC firewall is not
blocking the connection.
Select the media program and click
Allowed.
»» A green arrow appears next to the
media program.
EN
21
7
8
By default, Windows Media Player shares
from these folders: My Music, My Pictures,
and My Videos. If your files are in other
folders, click the Organize tab and select
Manage libraries > Music.
»» The Music Library Locations screen is
displayed.
Follow the onscreen instructions to add
the other folders that contain your media
files.
3
4
Macintosh OS X Twonky Media (v4.4.2)
1
2
3
4
5
6
Visit www.twonkymedia.com to purchase
the software, or download a free 30-day
trial to your Macintosh.
Start Twonky Media on the Macintosh.
Select a file, and then press OK.
• Some media files may not play due
to compatibility issues. Check the file
formats supported by your home
theater.
Press the play buttons to control play (see
'Play buttons' on page 13).
Choose sound
Type a name for your media server, and
then click Save changes.
This section helps you choose the ideal sound
for your video or music.
Back in the Twonky Media screen, select
Basic Setup and Sharing.
»» The Sharing screen is displayed.
Browse and select folders to share, and
then select Save Changes.
»» Your Macintosh rescans the folders
automatically so that they are ready to
share.
Note
•• Before you play multimedia content from the computer,
make sure that the home theater is connected to
the home network, and the media server software is
properly set up.
22
• If you cannot see the folders, check
that you have enabled media sharing
on the selected device so that the
content is available for sharing.
In the Twonky Media Server screen, select
Basic Setup and First Steps.
»» The First steps screen is displayed.
Play files from your PC
1
2
5
Select a device on the network.
»» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
Press
(Home).
Select [Browse PC], and then press OK.
»» A content browser is displayed.
EN
1
2
Press .
Press the Navigation buttons (left/right) to
access the sound options on the display.
Sound
options
Description
[Surround]
Select surround sound or stereo
sound.
Select a sound mode.
Delay the audio to match the
video.
Reduce sudden changes in
volume, for example, during TV
commercials.
[Sound]
[Audio
sync]
[Auto
volume]
3
4
Select an option, and then press OK.
Press
to exit.
• If you do not press a button within a
minute, the menu exits automatically.
Surround sound mode
Equalizer
Experience an immersive audio experience with
surround sound modes.
Change the high frequency (treble), mid
frequency (mid), and low frequency (bass)
settings of the home theater.
1
2
3
4
Press .
Select [Surround], and then press OK.
Press the Navigation buttons (up/down)
to select a setting from your display:
• [Auto]: Surround sound based on the
audio stream.
• [Multi-channel]: Traditional 5.1
channel for a more relaxing cinematic
experience.
• [Stereo]: Two-channel stereo sound.
Ideal for listening to music.
Press OK to confirm.
Sound mode
Select predefined sound modes to suit your
video or music.
1
2
3
4
5
Make sure that audio post processing is
enabled at the speakers (see 'Speaker
settings' on page 25).
1
2
3
4
Press .
Select [Sound] > [Personal], and then
press Navigation buttons (right).
Press the Navigation buttons (up/down)
to change bass, mid or treble frequency.
Press OK to confirm.
Auto volume
Turn on auto volume to reduce sudden changes
in volume, for example, during TV commercials.
1
2
3
4
Press .
Select [Auto volume], and then press OK.
Press the Navigation buttons (up/down)
to select [On] or [Off].
Press OK to confirm.
Press .
Select [Sound], and then press OK.
Press the Navigation buttons (up/down)
to select a setting on the display:
• [Auto]: Automatically select a sound
setting based on the sound stream.
• [Balanced]: Experience the original
sound of your movies and music,
without added sound effects.
• [Powerful]: Enjoy thrilling arcade
sounds, ideal for action-packed videos
and loud parties.
• [Bright]: Spice up your dull movies and
music with added sound effects.
• [Clear]: Hear every detail in your
music and clear voices in your movies.
• [Warm]: Experience spoken words
and music vocals in comfort.
• [Personal]: Personalize the sound
based on your preferences.
Press OK to confirm.
EN
23
5 Change settings
Picture and video settings
The home theater settings are already
configured for optimal performance. Unless
you have a reason to change a setting, we
recommend that you keep the default setting.
1
2
3
4
Note
•• You cannot change a setting that is grayed out.
•• To return to the previous menu, press . To exit the
menu, press
(Home).
Language settings
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Preference], and then press OK.
Press the Navigation buttons and OK to
select and change:
• [Menu language]: Select a display
language for menu.
• [Audio]: Select an audio language for
discs.
• [Subtitle]: Select a subtitle language
for discs.
• [Disc menu]: Select a menu language
for discs.
Note
•• If your preferred disc language is not available, select
[Others] from the list, and enter the 4-digit language
code found at the end of this user manual (see
'Language code' on page 37).
•• If you select a language that is not available on a disc,
the home theater uses the default language of the disc.
24
EN
Press
(Home).
Select [Setup], and then press OK.
Select [Video], and then press OK.
Press the Navigation buttons and OK to
select and change:
• [TV display]: Select a picture format to
fit the TV screen.
• [HDMI video]: Select the resolution of
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that your TV supports the
selected resolution.
• [HDMI Deep Color]: Recreate the
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
• [Picture settings]: Select pre defined
color settings for the video display.
• [Watch 3D video]: Set HDMI video to
support 3D or 2D video.
Note
•• If you change a setting, make sure that the TV supports
the new setting.
Audio settings
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Audio], and then press OK.
Press the Navigation buttons and OK to
select and change:
• [Night mode]: For quiet listening,
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
• [HDMI audio]: Set the HDMI audio
output from your TV.
• [Speaker setup]: Set up speakers for
best surround sound experience.
• [Default sound settings]: Restore
the equalizer settings of all the sound
modes to the default values.
Energy saving settings
1
2
3
4
Parental control settings
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Preference], and then press OK.
Press the Navigation buttons and OK to
select and change:
• [Change password]: Set or change
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
• [Parental control]: Restrict access
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].
Display settings
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Preference], and then press OK.
Press the Navigation buttons and OK to
select and change:
• [Auto subtitle shift]: Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
• [Display panel]: Set the brightness of
the home theater front panel display.
• [VCD PBC]: Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.
Press
(Home).
Select [Setup], and then press OK.
Select [Preference], and then press OK.
Press the Navigation buttons and OK to
select and change:
• [Screen saver]: Switch the home
theater to screen saver mode after 10
minutes of inactivity.
• [Auto standby]: Switch the home
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
• [Sleep timer]: Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
• [Fast wake up]: Select [On] to enable
fast wake up of your home theater.
Select [Off] to save energy of the
home theater.
Speaker settings
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Advanced], and then press OK.
Press the Navigation buttons and OK to
select and change:
• [Enhanced audio]: Select [On] to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select [Off].
Tip
•• Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
23).
EN
25
Restore default settings
1
2
3
4
Press
(Home).
Select [Setup], and then press OK.
Select [Advanced] > [Restore default
settings], and then press OK.
Select [OK], and then press OK to
confirm.
»» Your home theater is reset to its
default settings except for some
settings such as parental control and
DivX VOD registration code.
6 Update software
Philips continually tries to improve its products.
To get the best features and support, update
your home theater with the latest software.
Compare the version of your current
software with the latest version on
www.philips.com/support. If the current version
is lower than the latest version available on the
Philips support website, upgrade your home
theater with the latest software.
Caution
•• Do not install a lower version of software than the
current version installed on your product. Philips is not
liable for problems caused due to software downgrade.
Check software version
Check the version of the current software
installed on your home theater.
1
2
3
Press
(Home).
Select [Setup], and then press OK.
Select [Advanced] > [Version
information].
»» The software version is displayed.
Update software through
USB
What you need
• A USB flash drive that is FAT or NTFSformatted, with at least 256MB of memory.
Do not use a USB hard drive.
• A computer with Internet access.
• An archive utility that supports the ZIP file
format. 26
EN
Step 1: Download the latest software
1
2
3
4
5
6
Connect a USB flash drive to your
computer.
In your web browser, go to
www.philips.com/support.
At the Philips Support website, find your
product and locate the Software and
drivers.
»» The software update is available as a
zip file.
Save the zip file in the root directory of
your USB flash drive.
Use the archive utility to extract the
software update file in the root directory.
»» The files are extracted under the
UPG_ALL folder of your USB flash
drive.
Disconnect the USB flash drive from your
computer.
Step 2: Update the software
Caution
•• Do not switch off the home theater or remove the
USB flash drive during the update.
1
2
3
4
5
Update software through the
Internet 1
2
3
4
5
Connect your home theater to a home
network with a high-speed Internet access
(see 'Connect and set up a home network'
on page 11).
Press
(Home).
Select [Setup], and then press OK.
Select [Advanced] > [Software update] >
[Network].
»» If an upgrade media is detected, you
are prompted to start or cancel the
update.
»» Downloading of the upgrading file may
take long, depending on your home
network condition.
Follow the onscreen instructions to
confirm the update.
»» Update process takes about 5 minutes
to complete.
»» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.
Connect the USB flash drive containing the
downloaded file to your home theater.
• Make sure that the disc compartment
is closed and no disc inside.
Press
(Home).
Select [Setup], and then press OK.
Select [Advanced] > [Software update]
> [USB].
Follow the onscreen instructions to
confirm the update.
»» Update process takes about 5 minutes
to complete.
EN
27
7Product
specifications
Bluetooth
••
••
Bluetooth profiles: A2DP
Bluetooth version: 2.1 + EDR
Audio formats
Note
•• Specifications and design are subject to change without
notice.
Your home theater supports the following
audio files.
(. ra files are supported only in Asia Pacific and
China)
Region codes
The type plate on the back or bottom of the
home theater shows which regions it supports.
Country
Europe,
United Kingdom
DVD
BD
Media formats
•
AVCHD, BD, BD-R/ BD-RE, BD-Video,
DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL, CD-R/CD-RW, Audio CD,
Video CD/SVCD, Picture files, MP3 media,
WMA media, DivX Plus HD media, USB
storage device
File formats
•
•
•
28
Audio:
• .aac, .mka, .mp3, .wma, .wav, .mp4, .m4a,
.flac, .ogg
• .ra (Available only in Asia Pacific and
China)
Video:
• .avi, .divx, .mp4, .m4v, .mkv, .asf, .wmv,
.m2ts, .mpg, .mpeg, .3gp
• .rmvb, .rm, .rv (Available only in Asia
Pacific and China)
Picture: .jpg, .jpeg, .jpe, .gif, .png
EN
Extension
Container
Audio
codec
.mp3
MP3
MP3
.wma
ASF
.aac
AAC
.wav
.m4a
.mka
WAV
MKV
MKA
.ra
RM
.flac
.ogg
FLAC
OGG
Bit rate
Upto
320 kbps
WMA
Upto
192 kbps
AAC,
Upto
HE-AAC 192 kbps
PCM
27.648 Mbps
AAC
192 kbps
PCM
27.648 Mbps
Dolby
640 kbps
Digital
DTS
1.54 Mbps
core
MPEG
912 kbps
MP3
Upto
320 kbps
WMA
Upto
192 kbps
AAC,
Upto
HE-AAC 192 kbps
AAC,
Upto
HE-AAC 192 kbps
Cook
96469 bps
FLAC
Upto 24 bps
Vorbis
Variable
bit rate,
maximum
block size
4096
MP3
Upto
320 kbps
Video formats
.mkv files in MKV container
If you have a high definition TV, your home
theater allows you to play your video files with:
• Resolution: 1920 x 1080 pixels at
• Frame rate: 6 ~ 30 frames per second.
Audio codec
Video codec
Bit rate
PCM, Dolby
Digital, DTS
core, MPEG,
MP3, WMA,
AAC, HEAAC, DD+
DivX Plus
HD
30 Mbps
MPEG 1,
MPEG 2
MPEG 4 ASP
H.264/AVC
HiP@4.2
WMV9
40 Mbps
.avi files in AVI container
Audio codec
Video codec
Bit rate
PCM, Dolby
Digital, DTS
core, MP3,
WMA
DivX 3.11,
DivX 4.x,
DivX 5.x,
DivX 6.x
MPEG 1,
MPEG 2
MPEG 4 SP /
ASP
H.264/AVC
upto HiP@4.2
WMV9
10 Mbps max
40 Mbps
38.4 Mbps
25 Mbps
45 Mbps
.divx files in AVI container
Audio codec
Video codec
Bit rate
PCM, Dolby
Digital, MP3,
WMA
DivX 3.11,
DivX 4.x,
DivX 5.x,
DivX 6.x
10 Mbps max
.mp4 or .m4v files in MP4 container
Audio codec
Video codec
Bit rate
Dolby Digital,
MPEG, MP3,
AAC, HEAAC, DD+
MPEG 1,
MPEG 2
40 Mbps
MPEG 4 ASP
H.264/AVC
HiP@4.2
38.4 Mbps
25 Mbps
38.4 Mbps
25 Mbps
45 Mbps
.m2ts files in MKV container
Audio codec
Video codec
Bit rate
PCM, Dolby
Digital, DTS
core, MPEG,
MP3, WMA,
AAC, HEAAC, DD+
MPEG 1,
MPEG 2
40 Mbps
MPEG 4 ASP
H.264/AVC
HiP@4.2
WMV9
38.4 Mbps
25 Mbps
45 Mbps
.asf and .wmv files in ASF container
Audio codec
Video codec
Bit rate
Dolby Digital,
MP3, WMA,
DD+
MPEG 4 ASP
38.4 Mbps
H.264/AVC
HiP@4.2
WMV9
25 Mbps
45 Mbps
.mpg and .mpeg files in PS container
Audio codec
Video codec
Bit rate
PCM, DTS
core, MPEG,
MP3
MPEG 1,
MPEG 2
40 Mbps
EN
29
.3gp files in 3GP container
Radio
Audio codec
Video codec
Bit rate
AAC, HEAAC
MPEG 4 ASP
38.4 Mbps
H.264/
AVC upto
HiP@4.2
25 Mbps max
.rm, .rv, and .rmvb files in RM container
(Available only in Asia Pacific and China)
•
•
•
Tuning range:
• Europe/Russia/China: FM
87.5-108 MHz (50 kHz)
• Asia Pacific/Latin America: FM
87.5-108 MHz (50/100 kHz)
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 180 Hz-12.5 kHz
/ ±3 dB
Audio codec
Video codec
Bit rate
USB
AAC, COOK
RV30, RV40
40 Mbps
•
•
Amplifier
•
•
•
•
Total output power: 1000W RMS
(10% THD)
Frequency response: 20 Hz-20 kHz /
±3 dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
• AUX: 2 V
• AUDIO IN: 1 V
Video
•
•
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p24
•
•
Main unit
•
•
•
•
•
•
Audio
•
•
•
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 32 kbps - 320 kbps
• WMA: 48 kbps - 192 kbps
•
EN
Power supply:
• Europe/China: 220-240 V~, 50 Hz
• Latin America/Asia Pacific: 120
V/220-240 V~, 50-60 Hz
• Russia/India: 220-240 V~, 50 Hz
Power consumption: 160 W
Standby power consumption (fast wakeup
OFF): ≤ 0.5 W
Dimensions (W x H x D):
435 x 58 x 291 mm
Weight: 2.66 kg
Operating temperature and humidity:
0°C to 45°C, 5% to 90% humidity for all
climates
Storage temperature and humidity: -40°C
to 70°C, 5% to 95%
Subwoofer
•
•
•
•
•
•
30
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
File system: FAT16, FAT32, NTFS
USB port: 5V , 1A
Output power: 166 W RMS (10% THD)
Impedance: 3 ohm
Speaker drivers: 165 mm (6.5") woofer
Dimensions (WxHxD):
237 x 293 x 308 mm
Weight: 3.8 kg
Cable length: 3 m
Speakers
Laser
Center speaker:
• Output power: 166 W RMS (10% THD)
• Speaker impedance: 3 ohm
• Speaker drivers: 78 mm (3") full range
• Dimensions (WxHxD):
314 x 103 x 94 mm
• Weight: 0.97 kg
• Cable length: 2 m
•
•
•
Laser Type (Diode): InGaN/AIGaN (BD),
AIGaInP (DVD/CD)
Wave length: 405 +7 nm/-7 nm (BD),
655 +10 nm/-10 nm (DVD),
790 +10 nm/-20 nm (CD)
Output power (Max. ratings): 20 mW
(BD), 6 mW (DVD), 7 mW (CD)
Front/Rear speaker:
• Output power: 4 x 166 W RMS
(10% THD)
• Speaker impedance: 3 ohm
• Speaker drivers:
• HTB3520: 78 mm (3") full range
(front/rear)
• HTB3550: 2 x 78 mm (3") full range
(front); 78 mm (3") full range (rear)
• HTB3580: 2 x 78 mm (3") full range
(front/rear)
• Dimensions (WxHxD):
• HTB3520: 100 x 193 x 125 mm
(front/rear)
• HTB3550: 250 x 1140 x 250 mm
(front); 100 x 193 x 125 mm (rear)
• HTB3580: 250 x 1140 x 250 mm
(front/rear)
• Weight:
• HTB3520: 0.65 kg/each (front/
rear)HTB3550: 3.86 kg/each (front);
0.65 kg/each (rear)
• HTB3580: 3.86 kg/each (front/rear)
• Cable length (front): 3 m
• Cable length (rear): 10 m
Remote control batteries
•
2 x AAA-R03-1.5 V
EN
31
8Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the
Disc does not play high-definition video.
• Make sure that the disc contains highdefinition video.
• Make sure that the TV supports highdefinition video.
• Use an HDMI cable to connect to the TV.
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the home theater do not
work.
• Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
• Make sure that the touch buttons surface
is not in contact with any conductive
material, like water drop, metal, etc.
Picture
No picture.
• Make sure that the TV is switched to the
correct source for the home theater.
No picture on a TV connected through HDMI.
• Make sure that you use a High Speed
HDMI cable to connect the home theater
and TV. Some Standard HDMI cables do
not display properly for some images, 3D
video, or Deep Color.
• Make sure that the HDMI cable is not
faulty. If it is faulty, replace it with a new
cable.
• Press (Home) and then 731 on the
remote control to restore the default
picture resolution.
• Change the HDMI video setting, or wait
for 10 seconds for auto recovery (see
'Picture and video settings' on page 24).
32
EN
Sound
No sound from home theater speakers.
• Connect the audio cable from your home
theater to your TV or other devices.
However, you do not need a separate
audio connection when the home theater
and TV are connected through an HDMI
ARC connection.
• Set up the audio for the connected device
(see 'Set up the audio' on page 11).
• Reset your home theater to its factory
settings (see 'Restore default settings' on
page 26), and then switch it off and switch
on again.
• On your home theater, press SOURCE
repeatedly to select the correct audio
input.
Distorted sound or echo.
• If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
• 1) Press .
2) Press the Navigation buttons (left/right)
to select [Audio sync], and then press OK.
3) Press the Navigation buttons (up/
down) to synchronize the audio with the
video.
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
the type of disc (see 'Media formats' on
page 28).
•
•
Make sure that the home theater supports
the region code of the disc (see 'Region
codes' on page 28).
If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Cannot play a DivX file.
• Make sure that the DivX file is encoded
according to the 'Home Theater Profile'
with the DivX encoder.
• Make sure that the DivX file is complete.
DivX do not display correctly.
• Make sure that the subtitle file name is
the same as the movie file name (see
'Subtitles' on page 16).
• Select the correct character set:
1) Press .
2) Select [Character set].
3) Select the supported character set.
4) Press OK.
Cannot read the contents of a USB storage
device.
• Make sure that the format of the USB
storage device is compatible with the
home theater.
• Make sure that the file system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on the TV.
• The operation is not possible.
EasyLink does not work.
• Make sure that the home theater is
connected to a Philips brand EasyLink TV,
and the EasyLink option is turned on (see
'Set up EasyLink (HDMI-CEC control)' on
page 10).
• For TVs from different manufacturers, the
HDMI CEC could be called differently.
Check theTV user manual on how to
enable it.
When you switch on the TV, the home theater
automatically switches on.
• This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.
Cannot access BD-Live features.
• Make sure that the home theater is
connected to the network (see 'Connect
and set up a home network' on page 11).
• Make sure that the network is set up (see
'Connect and set up a home network' on
page 11).
• Make sure that the Blu-ray disc supports
BD-Live features.
• Clear memory storage (see 'BD-Live on
Blu-ray' on page 14).
My 3D video played in 2D mode.
• Make sure that your home theater is
connected to a 3D TV through an HDMI
cable.
• Make sure that the disc is a Blu-ray 3D disc,
and the Blu-ray 3D video option is on (see
'BD-Live on Blu-ray' on page 14).
TV screen is black when you play a Blu-ray 3D
video or a DivX copy protected video.
• Make sure that the home theater is
connected to the TV through an HDMI
cable.
• Switch to the correct HDMI source on
the TV.
Cannot download video from an online video
store.
• Make sure that your home theater is
connected to the TV through an HDMI cable.
• Make sure that the USB storage device
is formatted, has enough memory to
download the video.
• Make sure that you have paid for the video,
and it is within the rental period.
• Make sure that the network connection
is good (see 'Connect and set up a home
network' on page 11).
• Visit the video store website for more
information.
EN
33
Bluetooth
A device cannot connect with the home
theater.
• The device does not support the compatible
profiles required for the home theater.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly. (see 'Play
audio through Bluetooth' on page 15)
• The home theater is already connected
with another Bluetooth device. Disconnect
the connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move
the device closer to the home theater, or
remove any obstacle between the device
and the home theater.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move
the device closer to the home theater, or
remove any obstacle between the device
and the home theater.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated automatically
to save power. This does not indicate any
malfunction of the home theater.
NFC
A device cannot connect with the home
theater via NFC.
• Make sure that the device is supported by
NFC.
• Make sure that NFC is enabled on the
device (see the device' s user manual for
details).
• For pairing, tap the NFC device on the
NFC tag of the home theater.
34
EN
9Notice
This section contains the legal and trademark
notices.
Copyright
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
This product incorporates proprietary
technology under license from Verance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide
patents issued and pending as well as copyright
and trade secret protection for certain aspects
of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2013
Verance Corporation. All rights reserved by
Verance. Reverse engineering or disassembly is
prohibited.
Cinavia notice
This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.
Open source software
Open source software
Philips Electronics Hong Kong Ltd. hereby offers
to deliver, upon request, a copy of the complete
corresponding source code for the copyrighted
open source software packages used in this
product for which such offer is requested by
the respective licenses.
This offer is valid up to three years after
product purchase to anyone in receipt of this
information. To obtain source code, please
contact open.source@philips.com. If you prefer
not to use email or if you do not receive
confirmation receipt within a week after mailing
to this email address, please write to "Open
Source Team, Philips Intellectual Property &
Standards, P.O. Box 220, 5600 AE Eindhoven,
The Netherlands." If you do not receive timely
confirmation of your letter, please email to the
email address above.
Compliance
This product complies with the radio
interference requirements of the European
Community.
Hereby, Philips Consumer Lifestyle, declares
that this product is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC. You
can find the Declaration of Conformity on
www.p4c.philips.com.
Trademarks
"Blu-ray 3D " and "Blu-ray 3D " logo are
trademarks of Blu-ray Disc Association.
'DVD Video' is a trademark of DVD Format/
Logo Licensing Corporation.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or
other countries.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, DTS-HD, the Symbol, & DTS and
the Symbol together are registered trademarks,
and DTS-HD Master Audio | Essential is a
trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
EN
35
DivX , DivX Certified , DivX Plus HD
and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified device must be registered
in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
DivX Certified to play DivX and DivX Plus
HD (H.264/MKV) video up to 1080p HD
including premium content.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
The Bluetooth word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips
is under license. Other trademarks and trade
names are those of their respective owners.
36
EN
The N Mark is a trademark of NFC Forum, Inc.
in the United States and in other countries.
CLASS 1
LASER PRODUCT
10Language code
Abkhazian
6566
Afar
6565
Afrikaans
6570
Amharic
6577
Arabic
6582
Armenian
7289
Assamese
6583
Avestan
6569
Aymara
6589
Azerhaijani
6590
Bahasa Melayu
7783
Bashkir
6665
Belarusian
6669
Bengali
6678
Bihari
6672
Bislama
6673
Bokmål, Norwegian
7866
Bosanski
6683
Brezhoneg
6682
Bulgarian
6671
Burmese
7789
Castellano, Español
6983
Catalán
6765
Chamorro
6772
Chechen
6769
Chewa; Chichewa; Nyanja 7889
9072
Ё᭛
Chuang; Zhuang
9065
Church Slavic; Slavonic 6785
Chuvash
6786
Corsican
6779
Česky
6783
Dansk
6865
Deutsch
6869
Dzongkha
6890
English
6978
Esperanto
6979
Estonian
6984
Euskara
6985
6976
Faroese
7079
Français
7082
Frysk
7089
Fijian
7074
Gaelic; Scottish Gaelic 7168
Gallegan
7176
Georgian
7565
Gikuyu; Kikuyu
7573
Guarani
7178
Gujarati
7185
Hausa
7265
Herero
7290
Hindi
7273
Hiri Motu
7279
Hrwatski
6779
Ido
7379
Interlingua (International)7365
Interlingue
7365
Inuktitut
7385
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
7574
7585
7679
7665
7686
7666
7673
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
6785
7982
7977
7983
8073
8065
7065
8076
8084
Pushto
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Shqip
Sindhi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
EN
37
11Index
2
2nd audio language
2nd subtitle language
3
3D disc in 2D mode
3D safety
3D video
5
5.1 speakers
A
advanced settings
amplifier
audio connection (HDMI ARC)
audio formats
audio from other devices
audio language
audio options
audio post processing
audio settings
auto standby
auto subtitle shift
auto volume
B
batteries
BD-Live
Blu-ray
Bonus View
brightness
14
14
14
3
14
7
25
30
8
28
9
24
17
25
24
25
25
23
31
14
13
14
25
D
data files
deep color
default settings
device name
disc language
disc menu
display panel
disposal
DivX
E
Easylink (HDMI-CEC)
eject disc
enhanced audio
environment
F
factory settings
file formats
H
HDMI ARC
HDMI audio
HDMI-CEC
home menu
home network
I
internet
L
C
change password
character set
clear BD-Live memory
38
connect to TV
connectors
control buttons (disc)
control buttons (USB)
EN
25
16
14
language code
8
6
13
13
16
24
26
12
24
24
25
3
16
10
4
25
3
26
28
8
24
10
13
11
11
37
M
main unit
manual setup
media formats
media sharing
menu language
musical slideshows
N
network
night mode
O
one-touch play
one-touch standby
options
P
parental control
PBC (play back control)
picture options
picture resolution
picture settings
picture-in-picture
play disc
play from PC
play USB storage device
power settings
predefined sound mode
preference
R
recycling
region codes
remote control
repeat
S
shuffle
sleep timer
slide animation
4
10
28
20
24
18
11
24
11
11
17
Smart TV
software update
software version
sound
speaker position
speaker setup
speaker specifications
subtitle language
subtitle position
surround sound
synchronize picture and sound
19
26
26
22
7
10
28
24
25
23
14
T
troubleshooting (picture)
troubleshooting (play)
troubleshooting (sound)
tuning grid
32
32
32
19
U
25
25
18
24
24
14
13
22
17
25
23
24
update software (through Internet)
USB storage device
27
17
V
VCD
video connection (HDMI ARC)
video connection (standard HDMI)
video formats
video options
video settings
VOD code (DivX)
25
8
9
30
17
24
17
W
3
28
5
17
watch 3D
wired network
wireless rear audio
wireless speakers
14
12
8
8
17
25
18
EN
39
Specifications are subject to change without notice
© 2014 Koninklijke Philips N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips N.V. or their respective owners.
HTB3520G/HTB3550G/HTB3580G_12_UM_V1.0