advertisement
Printing specification
Signature
Drawn
Yuri.hong
MMM/DD/YYYY Jan/27/2014
1. Model Description
Model name :
2nd, 3rd Suffix :
39LB561V-ZC
EK
Brand name :
Product name :
LG
LB561V
2. Printing Specification
1. Trim size (Format) :
2. Printing colors
• Cover
:
• Inside :
3. Stock (Paper)
• Cover :
• Inside :
4. Bindery :
148 mm x 210 mm (A5)
1 Color (Black)
1 Color (Black)
Uncoated, wood-free paper 60 g/㎡
Uncoated, wood-free paper 60 g/㎡
Saddle stitching
5. Language :
ENG (1)
6. Number of pages :
40
Checked
Mira.woo
Jan/27/2014
Approved
Jongok.kim
Jan/27/2014
Part number :
(Revision number)
MFL68003809
(1401-REV00)
N
O
T
E
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
Printed in Kazakhstan LGEAK :
LGEAZ :
LGEEG :
LGEIL :
LGEIN :
LGEAS :
Printed in Brazil
Printed in Egypt
Printed in India
Printed in Indonesia
Printed in Algeria
LGEKR :
LGEMA :
LGEMX :
LGEND :
LGERA :
Printed in Korea
Printed in Poland
Printed in Mexico
Printed in China
Printed in Russia
LGERS :
LGESY :
LGETH :
LGEVN :
LGEWR :
Printed in Mexico
Printed in China
Printed in Thailand
Printed in Vietnam
Printed in Poland
4. Changes
10
9
8
7
6
5
4
3
2
1
Rev. Number MMM/DD/YYYY Signature ECO Number Change Contents
Pagination sheet
Front
Cover
(Eng)
P/No.
2 … … …
Part number :
MFL68003809
Total pages :
40 pages
… 39
Back
Cover
(ENG)
OWNER’S MANUAL
LED TV*
* L
G LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
LB55**
LB56**
LB62**
P/NO : MFL68003809 (1401-REV00)
Printed in Korea
*MFL68003809* w
ww.lg.com
2 LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
ABOUT DIVX VIDEO: DivX ® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified ® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified ® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified ® to play DivX ® video up to HD 1080p, including premium content.”
“DivX ® , DivX Certified ® and associated logos are trademarks of
Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [email protected].
This offer is valid for three (3) years from the date on which you purchased the product.
SAFETY INSTRUCTIONS 3
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING y Do not place the TV and/or remote control in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
-
- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil
- An area exposed to rain or wind
-
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
y Do not place the product where it might be exposed to dust.
This may cause a fire hazard.
y Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.This plug must remain readily attached and operable when TV is in use.
y Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
y Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
y Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.
y Ensure the power cord does not come into contact with hot objects such as a heater.
This may cause a fire or an electric shock hazard.
y Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
y Bend antenna cable between inside and outside building to prevent rain from flowing in.
This may cause water damaged inside the Product and could give an electric shock.
4 SAFETY INSTRUCTIONS y When mounting TV onto wall make sure to neatly install and isolate cabling from rear of
TV as to not create possibility of electric shock /fire hazard.
y Do not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
y Do not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
y Keep the anti-moisture packing material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation.
Keep it out of the reach of children.
y Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
y Dispose of used batteries carefully to ensure that a small child does not consume them.
Please seek Doctor- Medical Attention immediately if child consumes batteries.
y Do not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted.
(Depending on model) y Do not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
y Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
y Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.
y Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
You may be injured or the product can be damaged.
SAFETY INSTRUCTIONS 5 y Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
y Never touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
y Do not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
y If any of the following occur, unplug the product immediately and contact your local service centre.
- The product has been impacted by shock
-
- Foreign objects have entered the product
-
This may result in fire or electric shock.
y Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.
y Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
y Do not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.
CAUTION y Install the product where no radio wave occurs.
y There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
y Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
6 SAFETY INSTRUCTIONS y If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
y If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
y Only use the attachments / accessories specified by the manufacturer.
y When installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.
y We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
y Only use the specified type of battery.
This could cause damage to the remote control.
y Do not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
y Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight , open fireplace and electric heaters .
y Do not place non-rechargeable batteries in charging device.
y Make sure there are no objects between the remote control and its sensor.
y Signal from Remote Control can be interrupted due to external/internal lighting eg
Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
y When connecting external devices such as video game consoles, make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
y Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
SAFETY INSTRUCTIONS 7 y Please follow the installation instructions below to prevent the product from overheating.
- The distance between the product and the wall should be more than 10 cm.
cupboard).
-
Otherwise, this may result in fire.
y Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
y Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
y Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
y Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
y Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.
y Avoid touching the screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary or permanent distortion/damage to screen.
y When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
y As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.
y When unplugging the cable, grab the plug and unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.
y When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
8 SAFETY INSTRUCTIONS y When moving or unpacking the product, work in pairs because the product is heavy.
Otherwise, this may result in injury.
y Contact the service centre once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.
y Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
y If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with product.
y The panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
y You may find different brightness and color of the panel depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
y Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
y Generated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
SAFETY INSTRUCTIONS 9
Viewing 3D Imaging
(Only 3D models)
WARNING
Viewing Environment
y Viewing Time
- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
y Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.
y 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.
y If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.
y If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.
Symptoms which require discontinuation or refraining from watching 3D contents
y Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. y When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
10 SAFETY INSTRUCTIONS
CAUTION
Viewing Environment
y Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
y Infants/Children
- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.
- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.
y Teenagers
- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
y Elderly
- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.
Cautions when using the 3D glasses
y Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
y y
Using modified 3D glasses may cause eye strain or image distortion.
Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
y The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.
ASSEMBLING AND PREPARING 11
NOTE y Image shown may differ from your TV.
y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y The available menus and options may differ from the input source or product model that you are using.
y New features may be added to this TV in the future.
y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION y Do not use any unapproved items to ensure the safety and product life span.
y Any damages or injuries by using unapproved items are not covered by the warranty.
y Some models have a thin film attached on to the screen and this must not be removed.
NOTE y The items supplied with your product may vary depending on the model.
y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
B
B
A A
*A = 10 mm
*B = 18 mm
12 ASSEMBLING AND PREPARING
Remote control, batteries (AAA)
Owner’s manual Power Cord
Stand Base
(Only LB55**, LB56**-ZE / ZC,
LB62**-ZA / ZB)
Stand Base
(Only LB56**-ZT / ZQ, LB62**-ZE)
Stand Screws
4EA, M4 x L14
(Only 42/49LB55**,
39/42/47/50/55/60LB56**,
42/49/55LB62**)
Stand Screws
4EA, M4 x L20
(Only 32LB55**, 32LB56**,
32LB62**)
Wall Mount Spacers
2EA
(Only 42LB55**, 42LB56**,
42LB62**)
Cable Managements
2EA
Cable holder
(Depending on model)
Cinema 3D Glasses
The number of 3D glasses may differ depending on the model or country.
(Only LB62**)
ASSEMBLING AND PREPARING 13
Separate purchase
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
LG Audio Device AG-F***
Cinema 3D Glasses
AG-F***DP
Dual play glasses
Compatibility LB56** / LB55** LB62**
LG Audio device
AG-F***
Cinema 3D Glasses
AG-F***DP
Dual play glasses
•
•
•
•
The model name or design may be changed due to the manufacturer’s circumstances or policies.
14 ASSEMBLING AND PREPARING
Parts and buttons
(Only LB55**, LB56**-ZE / ZC, LB62**-ZA / ZB)
Speakers
(Only LB56**-ZT / ZQ, LB62**-ZE)
Remote control sensor
Power Indicator
Screen
Joystick Button
(* This button is located below the TV screen.)
Screen
Joystick Button
(* This button is located below the TV screen.)
Speakers
Remote control sensor
Power Indicator
NOTE y You can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING 15
Using the Joystick button
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
Power Off
Volume Control
When the TV is turned off, place your finger on the joystick button and press it once and release it.
When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and holding the joystick button will let you exit the Menu.)
If you place your finger over the joystick button and move it left or right, you can adjust the volume level you want.
Programmes
Control
If you place your finger over the joystick button and move it up or down, you can scrolls through the saved programmes you want.
NOTE y When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button first, you can not adjust the volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items( , , , ) moving the joystick button up, down, left or right.
TV off Turns the power off.
Settings Accesses the main menu.
Close Clears on-screen displays and returns to TV viewing.
Input List Changes the input source.
16 ASSEMBLING AND PREPARING
Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen.
y It is recommended to move the TV in the box or packing material that the TV originally came in.
y Before moving or lifting the TV, disconnect the power cord and all cables.
y When holding the TV, the screen should face away from you to avoid damage.
y When transporting the TV, do not expose the TV to jolts or excessive vibration.
y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
y Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.
y Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part, speaker, or speaker grill area.
y When transporting a large TV, there should be at least 2 people.
y When transporting the TV by hand, hold the TV as shown in the following illustration.
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
(Only LB55**, LB56**-ZE / ZC, LB62**-ZA / ZB)
1
A Stand Base
B Stand Base
ASSEMBLING AND PREPARING 17
(Only LB56**-ZT / ZQ, LB62**-ZE)
1
A Stand Base
B Stand Base
2
2
M4 x L14
4EA
(Only 32LB56**-ZT / ZQ,
32LB62**-ZE)
M4 x L20
M4 x L14
4EA
(Only 32LB55**,
32LB56**-ZE / ZC,
32LB62**-ZA / ZB)
M4 x L20
CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
18 ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a table.
for proper ventilation.
Securing the TV to a wall
(This feature is not available for all models.)
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION y Do not place the TV near or on sources of heat, as this may result in fire or other damage.
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eyebolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
CAUTION y Make sure that children do not climb on or hang on the TV.
NOTE y Use a platform or cabinet that is strong and large enough to support the TV securely.
y Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.
ASSEMBLING AND PREPARING 19
Mounting on a wall
Attach an optional wall mount bracket at the rear of the
TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.
LG recommends that wall mounting be performed by a qualified professional installer.
B
A
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
Separate purchase(Wall Mounting Bracket)
Model
32/39LB56**
32LB55**
32LB62**
200 x 200 VESA (A x B)
Standard screw M6
Number of screws 4
Wall mount bracket
LSW240B
MSW240
Model 60LB56**
42/47/50/55LB56**
42/49LB55**
42/49/55LB62**
400 x 400
M6
4
LSW440B
MSW240
VESA (A x B) 400 x 400
Standard screw M6
Number of screws 4
Wall mount bracket
LSW440B
CAUTION y Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact the local dealer or qualified personnel.
y Do not over tighten the screws as this may cause damage to the TV and void your warranty.
y Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
NOTE y Use the screws that are listed on the VESA standard screw specifications.
y The wall mount kit includes an installation manual and necessary parts.
y The wall mount bracket is not provided. You can obtain additional accessories from your local dealer.
y The length of screws may differ depending on the wall mount. Make sure to use the proper length.
y For more information, refer to the manual supplied with the wall mount.
NOTE y Only 42LB55**, 42LB56**, 42LB62**
Wall Mount Spacers
20 MAKING CONNECTIONS
MAKING CONNECTIONS
This section on MAKING CONNECTIONS mainly uses diagrams for the 47LB561V models.
Connect various external devices to the TV and switch input modes to select an external device.
For more information of external device’s connection, refer to the manual provided with each device.
Available external devices are:
HD receivers, DVD players, VCRs, audio systems,
USB storage devices, PC, gaming devices, and other external devices.
NOTE y The external device connection may differ from the model.
y Connect external devices to the TV regardless of the order of the TV port.
y If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or
VCR. For more information of recording, refer to the manual provided with the connected device.
y Refer to the external equipment’s manual for operating instructions.
y If you connect a gaming device to the TV, use the cable supplied with the gaming device.
y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
y In PC mode, some resolution settings may not work properly depending on the graphics card.
Antenna connection
Wall Antenna
Socket
ANTENNA /
CABLE IN
*Not Provided
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
NOTE y Use a signal splitter to use more than 2 TVs.
y If the image quality is poor, install a signal amplifier properly to improve the image quality.
y If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
y An antenna cable and converter are not supplied.
y Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
Satellite dish connection
(Only satellite models)
Satellite
Dish
13/18V
700mA Max
LNB
Satellite IN
*Not Provided
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
Euro Scart connection
*Not Provided
AUDIO / VIDEO
Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown.
Current input mode
Output
Type
AV1
(TV Out 1 )
Digital TV Digital TV
Analogue TV, AV
Component Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
NOTE y Any Euro scart cable used must be signal shielded.
y When watching digital TV in 3D imaging mode, only 2D out signals can be output through the
SCART cable. (Only 3D models)
MAKING CONNECTIONS 21
22 MAKING CONNECTIONS
Other connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable as shown. Some separate cable is not provided.
(Only LAN PORT models)
IN
13/18V
700mA Max
LNB
Satellite IN
ANTENNA /
CABLE IN
HDMI
DVD/ Blu-Ray / HD Cable Box
/ HD STB / PC
(Only Satellite models)
YELLOW
WHITE
RED
GREEN
BLUE
RED
WHITE
RED
OPTICAL AUDIO IN
VIDEO ( MONO )
AUDIO VIDEO
Digital Audio System DVD/ Blu-Ray / HD Cable Box / VCR DVD/ Blu-Ray / HD Cable Box
HDMI 2 port position varies by model.
Only LB56**, LB62** series
PCMCIA card
USB / HDD
Headphone
Mobile phone
(Only LAN PORT models)
IN
13/18V
700mA Max
LNB
Satellite IN
ANTENNA /
CABLE IN
HDMI
DVD/ Blu-Ray / HD Cable Box
/ HD STB / PC
(Only Satellite models)
YELLOW
WHITE
RED
GREEN
BLUE
RED
WHITE
RED
OPTICAL AUDIO IN
VIDEO ( MONO )
AUDIO VIDEO
Digital Audio System DVD/ Blu-Ray / HD Cable Box / VCR DVD/ Blu-Ray / HD Cable Box
MAKING CONNECTIONS 23
HDMI 2 port position varies by model.
Only LB56**, LB62** series
PCMCIA card
USB / HDD
Headphone
Mobile phone
24 REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION y Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
(Only LB55**, LB56**)
1
RATIO
TV/
RAD
INPUT
SUBTITLE AD
1 2 3
4 5 6
7 8 9
LIST
0
Q.VIEW
FAV
GUIDE
P
PAGE
MUTE
TEXT INFO T.OPT
SETTINGS Q.MENU
AV MODE REC/
EXIT
(POWER) Turns the TV on or off.
TV/RAD Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
AD By pressing the AD button, audio descriptions function will be enabled.
RATIO Resizes an image.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
Adjusts the volume level.
FAV Accesses your favourite programme list.
GUIDE Shows programme guide.
MUTE Mutes all sounds.
P Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
Teletext buttons ( TEXT / T.OPT) These buttons are used for teletext.
INFO Views the information of the current programme and screen.
SETTINGS Accesses the main menus.
Q.MENU Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
AV MODE Selects an AV mode.
Starts to record and displays record menu.
(Only Time Machine Ready supported model)
Control buttons (
Time Machine Ready or Time Machine Ready ).
) Controls the MY MEDIA menus,
control or the SIMPLINK compatible devices (USB, SIMPLINK
1 Colour buttons These access special functions in some menus.
( : Red, : Green, : Yellow, : Blue)
REMOTE CONTROL 25
(Only LB62**)
1
TV/
RAD
INPUT
SUBTITLE
GUIDE
AV MODE
1 2 3
4 5 6
7 8 9
LIST
0
Q.VIEW
FAV
P
PAGE
MUTE
TEXT INFO T.OPT
SETTINGS Q.MENU
AD REC/
EXIT
(POWER) Turns the TV on or off.
TV/RAD Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
GUIDE Shows programme guide.
AV MODE Selects an AV mode.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
Adjusts the volume level.
FAV Accesses your favourite programme list.
Used for viewing 3D video.
MUTE Mutes all sounds.
P Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
Teletext buttons ( TEXT / T.OPT) These buttons are used for teletext.
INFO Views the information of the current programme and screen.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
AD By pressing the AD button, audio descriptions function will be enabled.
Starts to record and displays record menu.
(Only Time Machine Ready supported model)
Control buttons (
Time Machine Ready or Time Machine Ready
) Controls the MY MEDIA menus,
control or the SIMPLINK compatible devices (USB, SIMPLINK
).
1 Colour buttons These access special functions in some menus.
( : Red, : Green, : Yellow, : Blue)
26 NETWORK CONNECTION
NETWORK CONNECTION
(Only LAN PORT model)
Image shown may differ from your TV.
Wired network connection
Internet connection
Wired router
Network setting
1 Press the SETTINGS button to access the main menu.
2 Select the NETWORK Network Setting menu.
NETWORK
Move OK
Network Setting
Network Status
4 The device automatically tries to connect to the network.
Network Setting
Network connecting...
3 Select the Start Connection.
Network Setting
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Previous
Start Connection
Next
Cancel
Previous
5 The connected network is displayed.
Select the Complete to confirm the network connection.
Network Setting
Wired network is connected.
For detailed settings, select [Set Expert].
Set Expert Complete
Previous
SETTINGS 27
SETTINGS
Automatically Setting Up Programme
SETTINGS SETUP Auto Tuning
Automatically tunes the programmes.
y If Input Source is not connected properly, programme registration may not work.
y Auto Tuning only finds programmes that are currently broadcasting.
y If Lock System is turned on, a pop-up window will appear asking for password.
To adjust picture with Picture Wizard
SETTINGS PICTURE Picture Wizard III
[Depending on model]
Calibrates and adjusts for optimum picture quality using the remote control and the Picture Wizard without expensive pattern devices or help from a specialist.
To select Picture Mode
SETTINGS PICTURE Picture Mode
Select the picture mode optimized for the viewing environment or the programme.
y Vivid : Heightens contrast, brightness and sharpness to display vivid images.
y Standard : Displays images in standard levels of contrast, brightness and sharpness.
y Eco/APS: [Depending on model]
The Energy Saver feature changes settings on the
TV to reduce power consumption. y Cinema/Game: Displays the optimum picture for movie, game. y Sports : Optimizes the video image for high and dynamic actions by emphasizing primary colours such as white, grass, or sky blue.
y Expert 1, 2 : Menu for adjusting picture quality that allows experts and amateurs to enjoy the best
TV viewing. This is the adjustment menu provided for ISF-certified picture tuning professionals. (ISF logo can only be used on ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified
Calibration Control y Depending on input signal, available range of picture modes may differ.
y Expert mode is for picture tuning professionals to control and fine-tune using a specific image. For normal images, the effects may not be dramatic. y The ISF function is only available on some models.
To set advanced control
SETTINGS PICTURE Picture Mode
Advanced Control / Expert Control
Calibrates the screen for each picture mode; or adjusts picture settings for a special screen. First select a
Picture Mode of your choice.
y Dynamic Contrast : Adjusts the contrast to the optimal level according to the brightness of the image.
y Dynamic Colour : Adjusts colours to make the image appear in more natural colours.
y Skin Colour : Sets Skin colour spectrum separately to implement the skin colour as defined by the user.
y Sky Colour : Sky colour is set separately.
y Grass Colour : Natural colour spectrum (meadows, hills, etc.) can be separately set.
y Gamma : Sets the gradation curve according to the output of picture signal in relation to the input signal. y Colour Gamut : Selects the range of colours that can be expressed.
y Edge Enhancer : Shows clearer and distinctive yet natural edges of the video.
y Expert Pattern : [Depending on model]
Patterns used for expert adjustment.
y Colour Filter : Filters a specific colour spectrum in
RGB colours to fine-tune colour saturation and hue accurately.
y Colour Temperature : Adjusts the overall tone of the screen as desired. In Expert mode, detailed finetuning can be set via Gamma method, etc.
y Colour Management System : This is a system that experts use when they adjust colour with a test pattern. They can select from six colour areas
(Red / Green / Blue / Cyan / Magenta / Yellow) without affecting other colours. For normal images, adjustments may not result in noticeable colour changes.
y Depending on input signal or other picture settings, the range of detailed items for adjustment may differ.
28 SETTINGS
To set additional picture options
SETTINGS PICTURE Picture Mode
Picture Option
[Depending on model]
Adjusts detailed setting for images.
y Noise Reduction : Eliminates noise in the picture.
y MPEG Noise Reduction : Eliminates noise generated while creating digital picture signals.
y Black Level : Adjusts the brightness and contrast of the screen to suit the black level of the input picture by using the blackness (black level) of the screen.
y Real Cinema : Optimizes the screen for movie viewing. y Motion Eye Care/SUPER Energy Saving :
[Depending on model] y
Saves power consumption by adjusting the brightness corresponding to the movement of the image on the screen.
Depending on input signal or other picture settings, the range of detailed items for adjustment may differ.
To use TruMotion
SETTINGS PICTURE TruMotion
[Depending on model]
Corrects images to display smoother motion sequences.
y Smooth : De-judder/De-blur working on higher range in auto mode.
y Clear : De-judder/De-blur working on middle range in auto mode.
y User : De-judder / De-blur can be set manually.
De-judder : This function adjusts juddering of the screen.
De-blur : This function adjusts and eliminates blurring of the screen.
Auto means Juddering and blurring range that depend on input video status is controlled by TruMotion mode.
To use Energy Saving feature
SETTINGS PICTURE Energy Saving
Reduces power consumption by adjusting screen brightness.
y Auto : [Depending on model]
The TV sensor detects the ambient lighting and automatically adjusts the screen brightness.
y Off : Turns off the Energy Saving mode.
y Minimum / Medium / Maximum : Applies the preset Energy Saving mode.
y Screen Off : Screen is turned off and only sound is played. Press any button except Power button on the remote control to turn the screen back on.
To use TV speaker
SETTINGS AUDIO Sound Out TV Speaker
[Depending on model]
Sound is output through the TV speaker.
To use External Speaker
SETTINGS AUDIO Sound Out
External Speaker (Optical)
[Depending on model]
Sound is output through the speaker connected to the optical port. y SimpLink is supported.
To use Digital Sound Out
SETTINGS AUDIO Sound Out
External Speaker (Optical) Digital Sound Out
[Depending on model]
Sets up Digital Sound Out.
Item
Auto
PCM
Audio Input
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
All
Digital Audio
Ouput
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCM
SETTINGS 29
To connect and use LG audio device
SETTINGS AUDIO Sound Out
LG Sound Sync (Optical)
[Depending on model]
Connect LG audio device with the to enjoy rich powerful sound easily.
logo to the optical digital audio output port. LG audio device allows you
To use Headphone
SETTINGS AUDIO Sound Out Headphone
[Depending on model]
Sound is output through the headphone connected to the earphone/headphone port.
To synchronize audio and video
SETTINGS AUDIO AV Sync. Adjust
[Depending on model]
Synchronizes video and audio directly when they do not match.
y If you set AV Sync. Adjust to ON, you can adjust the sound output (TV speakers or SPDIF) to the screen image.
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to control and manage various multimedia devices conveniently via the SIMPLINK menu.
1 Connect the TV’s HDMI IN terminal and the
SIMPLINK device’s HDMI output terminal using an
HDMI cable.
y [Depending on model]
For home theatre units with a SIMPLINK function, connect HDMI terminals as above, and use an optical cable to connect Optical Digital Audio
Out from the TV to Optical Digital Audio In of the
SIMPLINK device.
2 Select INPUT(OPTION) SIMPLINK.
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK function to ON.
4 In SIMPLINK menu window, selects the device you want to control.
y This function is only compatible with devices with the SIMPLINK logo. y To use the SIMPLINK function, you need to use a high-speed HDMI ® cable (with CEC (Consumer
Electronics Control) feature added). High-speed
HDMI ® cables have the No. 13 pin connected for information exchange between devices. y If you switch to another input, the SIMPLINK device will stop. y If a third-party device with the HDMI-CEC function is also used, the SIMPLINK device may not work normally.
y [Depending on model]
If you select or play media from a the device with a home theatre function, the HT Speaker(Speaker) is automatically connected.
Be sure to connect with an optical cable (sold separately) to use the HT Speaker(Speaker) function.
SIMPLINK function description
y Direct Play : Plays the multimedia device on the TV instantly.
y Select multimedia device : Selects the desired device via the SIMPLINK menu to control it from the
TV screen instantly.
y Disc playback : Manages the multimedia device with the TV remote control.
y Power off all devices : When you power off the TV, all connected devices are turned off. y Sync Power on: When the equipment with
SIMPLINK function connected HDMI terminal starts to play, the TV will automatically turn on. y Speaker : [Depending on model]
Select speaker either on the home theatre unit or the TV.
To set password
SETTINGS LOCK Set Password
Sets or changes the TV password.
The initial password is set to ‘0000’.
When France is selected for Country, password is not
‘0000’ but ‘1234’.
When France is selected for Country, password cannot be set to ‘0000’.
To return Factory Reset
SETTINGS OPTION Factory Reset
All stored information is deleted and TV settings are reset.
The TV turns itself off and back on, and all settings are reset.
y When Lock System is in place, a pop-up window appears and asks for password y Do not turn off the power during initialization.
30 SETTINGS
To remove the USB device
Q.MENU USB Device
Select a USB storage device that you want to remove.
When you see a message that the USB device has been removed, separate the device from the TV. y Once a USB device has been selected for removal, it can no longer be read. Remove the USB storage device and then re-connect it.
Using a USB storage device - warning
y If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. y Some USB storage devices may not work or may work incorrectly. y Use only USB storage devices formatted with the
Windows FAT32 or NTFS File System. y For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA. y It is recommended that you use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less. y If a USB HDD with power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB
HDD. y Data in the USB storage device can be damaged, so be sure to back up important files to other devices.
Data maintenance is the user’s responsibility and the manufacturer is not responsible for data loss.
My Media supporting file
y Maximum data transfer rate : 20 Mbps (Mega bit per second) y External supported subtitle formats : *.srt (SubRip),
*.smi (SAMI), *.sub (SubViewer, MicroDVD,
DVDsubtitleSystem, SubIdx(Vobsub)), *.ass/*.
ssa (SubStation Alpha), *.txt (TMplayer), *.psb
(PowerDivX) y Internal supported subtitle formats: XSUB (Supports internal subtitles generated from DivX6)
Supported Video Formats
y Maximum: 1920 x 1080 @ 30p (only Motion JPEG
640 x 480 @ 30p) y .asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XViD, H.264/AVC, VC1(WMV3,
WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC,
AC3, MP3, 3D WMV Single Stream.
y divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer
I, MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer III
(MP3), *DTS y .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-
1 Layer III (MP3), Dolby Digital, Dolby Digital Plus,
AAC, HE-AAC, *DTS y .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1
Layer II, DVD-LPCM y .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XVID, H.264/AVC [Audio] AAC,
MPEG-1 Layer III (MP3), *DTS y .mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XVID, H.264/AVC [Audio] HE-AAC,
Dolby Digital, MPEG-1 Layer III (MP3), *DTS, LPCM y motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM y .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby
Digital, LPCM y dat
[Video] MPEG-1, MPEG-2
[Audio] MP2 y flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC y *rm, *rmvb
[Video] RV30, RV40
[Audio] Dolby Digital, AAC, HE-AAC, RA6(Cook) y 3gp, 3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB) y *DTS / *rm / *rmvb : Depending on model
SETTINGS / TO SEE WEB MANUAL / EXTERNAL CONTROL DEVICE SETUP 31
Supported Audio Formats
y File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3 y File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS y File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4 y File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard y File Type : WMA
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro y File Type : OGG
[Bit rate] Free Format
[Sample freq.] 8kHz ~ 48 kHz
[Support] OGG Vorvis
Supported Photo Formats
y Category : 2D (jpeg, jpg, jpe)
[Available file type] SOF0: Baseline,
SOF1: Extend Sequential,
SOF2: Progressive
[Photo size] Minimum: 64 x 64,
Maximum: Normal Type: 15360 (W) x 8640
(H), Progressive Type: 1920 (W) x 1440 (H) y Category : BMP
[Photo size] Minimum : 64 x 64, Maximum :
9600 x 6400 y Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum : Interlace
: 1200 x 800, Non-Interlace : 9600 x 6400 y BMP and PNG format files may be slower to display than JPEG.
TO SEE WEB MANUAL
To obtain detailed User Guide information, please visit www.lg.com.
EXTERNAL CONTROL
DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com.
32 MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first.
y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand y To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
y To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent.
Then wipe immediately with a dry cloth.
CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen.
y Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions.
y Do not use any chemicals as this may damage the product.
y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Cannot control the TV with the remote control.
No image display and no sound is produced.
The TV turns off suddenly.
When connecting to the PC
(HDMI), ‘No signal’ or ‘Invalid
Format’ is displayed.
Solution y Check the remote control sensor on the product and try again.
y Check if there is any obstacle between the product and the remote control.
y Check if the batteries are still working and properly installed
( to , to ).
y Check if the product is turned on.
y Check if the power cord is connected to a wall outlet.
y Check if there is a problem in the wall outlet by connecting other products.
y Check the power control settings. The power supply may be interrupted.
y Check if the Automatic Standby (Depending on model) / Sleep Timer /
Off Time feature is activated in the TIME settings. y If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
y Turn the TV off/on using the remote control.
y Reconnect the HDMI cable.
y Restart the PC with the TV on.
SPECIFICATIONS 33
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand (mm)
With stand (kg)
Without stand (kg)
Power consumption
Power requirement
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand (mm)
With stand (kg)
Without stand (kg)
Power consumption
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
Without stand (mm)
Weight
With stand (kg)
Without stand (kg)
Power consumption
Power requirement
32LB5610-ZC
32LB561B-ZC
32LB561U-ZC
32LB561U-ZE
32LB561V-ZC
32LB561V-ZE
732 x 481 x 207
732 x 431 x 55.5
32LB56**
32LB563U-ZT
32LB563V-ZT
32LB565U-ZQ
32LB565V-ZQ
732 x 475 x 185
732 x 431 x 55.5
6.2
6.0
65 W
6.2
6.0
65 W
AC 100-240 V~ 50 / 60 Hz
42LB5610-ZC
42LB561B-ZC
42LB561U-ZC
42LB561U-ZE
42LB561V-ZC
42LB561V-ZE
961 x 610 x 218
42LB56**
42LB563U-ZT
42LB563V-ZT
42LB565U-ZQ
42LB565V-ZQ
961 x 613 x 193
961 x 567 x 55.5
961 x 567 x 55.5
9.5
9.2
100 W
9.5
9.2
50LB56**
50LB5610-ZC
50LB561B-ZC
50LB561U-ZC
50LB561U-ZE
50LB561V-ZC
50LB561V-ZE
1128 x 708 x 255
1128 x 660 x 55.8
100 W
AC 100-240 V~ 50 / 60 Hz
55LB56**
55LB5610-ZC
55LB561B-ZC
55LB561U-ZC
55LB561U-ZE
55LB561V-ZC
55LB561V-ZE
1243 x 772 x 255
14.2
13.8
120 W
1243 x 725 x 56.8
18.4
18
130 W
AC 100-240 V~ 50 / 60 Hz
39LB56**
39LB5610-ZC
39LB561B-ZC
39LB561U-ZC
39LB561U-ZE
39LB561V-ZC
39LB561V-ZE
885 x 567 x 218
885 x 524 x 55.5
8.3
8
90 W
47LB56**
47LB5610-ZC
47LB561B-ZC
47LB561U-ZC
47LB561U-ZE
47LB561V-ZC
47LB561V-ZE
1073 x 676 x 255
1073 x 629 x 55.8
12.7
12.3
110 W
60LB56**
60LB5610-ZC
60LB561B-ZC
60LB561U-ZC
60LB561U-ZE
60LB561V-ZC
60LB561V-ZE
1373 x 848 x 280
1373 x 801 x 58.8
23.5
23.0
130 W
34 SPECIFICATIONS
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand (mm)
With stand (kg)
Without stand (kg)
Power consumption
Power requirement
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand (mm)
With stand (kg)
Without stand (kg)
Power consumption
Power requirement
Dimensions
(W x H x D)
Weight
MODELS
MODELS
With stand (mm)
Without stand (mm)
With stand (kg)
Without stand (kg)
Power consumption
Power requirement
32LB55**
32LB5500-ZA
32LB550B-ZA
32LB550U-ZA
32LB550V-ZA
32LB550V-ZA
32LB551U-ZC
32LB551V-ZC
731 x 480 x 208
731 x 437 x 56.5
5.9
42LB55**
42LB5500-ZA
42LB550B-ZA
42LB550U-ZA
42LB550V-ZA
42LB550V-ZA
42LB551U-ZC
42LB551V-ZC
959 x 611 x 218
959 x 570 x 56.2
9.5
5.7
65 W
9.2
100 W
32LB620V-ZA
32LB628U-ZB
32LB628V-ZB
731 x 480 x 208
AC 100-240 V~ 50 / 60 Hz
32LB62**
32LB6200-ZE
32LB620V-ZE
731 x 477.6 x 184.6
731 x 437 x 56.5
731 x 437 x 56.5
5.9
5.7
5.9
5.7
65 W 65 W
AC 100-240 V~ 50 / 60 Hz
42LB620V-ZA
42LB628U-ZB
42LB628V-ZB
959 x 611 x 218
42LB62**
42LB6200-ZE
42LB620V-ZE
959 x 609.7 x 193
959 x 570 x 56.2
9.5
9.2
959 x 570 x 56.2
9.5
9.2
100 W 100 W
AC 100-240 V~ 50 / 60 Hz
49LB55**
49LB5500-ZA
49LB550B-ZA
49LB550U-ZA
49LB550V-ZA
49LB550V-ZA
49LB551U-ZC
49LB551V-ZC
1105 x 694 x 247
1105 x 652 x 56.5
13.6
13.2
110 W
SPECIFICATIONS 35
MODELS
Dimensions
(W x H x D)
Weight
With stand (mm)
Without stand (mm)
With stand (kg)
Without stand (kg)
Power consumption
Power requirement
49LB620V-ZA
49LB628U-ZB
49LB628V-ZB
1105 x 694 x 247
49LB62**
49LB6200-ZE
49LB620V-ZE
1105 x 694.3 x 230
1105 x 652 x 56.5
13.6
1105 x 652 x 56.5
13.6
13.2
110 W
13.2
110 W
AC 100-240 V~ 50 / 60 Hz
55LB62**
55LB6200-ZE
55LB620V-ZE
1241 x 769 x 230
1241 x 724 x 57.5
18.2
17.8
130 W
36 SPECIFICATIONS
CI Module Size (W x H x D)
Environment condition
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Television system
Programme coverage
Maximum number of storable programmes
External antenna impedance
6,000
100.0 mm x 55.0 mm x 5.0 mm
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Satellite Digital TV Digital TV
DVB-T/T2
DVB-C
DVB-S/S2
VHF, UHF
C-Band, Ku-Band
DVB-T
DVB-C
VHF, UHF
Analogue TV
PAL/SECAM B/G/D/K/I,
SECAM L/L’
VHF: E2 to E12,
UHF : E21to E69,
CATV: S1 to S20,
HYPER: S21 to S47
1,500
75 Ω
3D supported mode
(Only 3D models) y Video, which is input as below media contents is switched into the 3D screen automatically.
y The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images.
Input
HDMI
DTV
USB
Signal
720p
1080i
Resolution
1280 x 720
1920 x 1080
1080p 1920 x 1080
720p
1080i
1280 x 720
1920 x 1080
1080p 1920 x 1080
Horizontal
Frequency (kHz)
37.5
45
75
89.9 / 90
28.125
33.7
27
33.7
53.95 / 54
56.3
67.5
37.5
28.125
Vertical
Frequency (Hz)
50
60
50
59.94 / 60
50
60
24
30
23.98 / 24
50
60
50
50
33.75
30
Playable 3D video format
Side by Side(half),
Top and Bottom
Frame packing
Side by Side(half),
Top and Bottom
Side by Side(half),
Top and Bottom
Frame packing
Side by Side(half), Top and Bottom,
Single frame sequential
Side by Side, Top and Bottom
Side by Side, Top and Bottom,
JPS, MPO(Photo)
HDMI-DTV supported mode
Resolution
720 x 480
720 x 576
1280 x 720
1920 x 1080
Horizontal
Frequency (kHz)
31.469
31.5
31.25
37.5
45
44.96
28.125
33.75
33.72
56.25
67.5
67.432
27
26.973
33.75
33.716
Vertical
Frequency
(Hz)
59.94
60
50
50
60
59.94
50
60
59.94
50
60
59.94
24
23.976
30
29.97
SPECIFICATIONS 37
Component port connecting information
Component ports on the TV Y P
B
P
R
Video output ports on
DVD player
Y
Y
Y
Y
P
B
B-Y
Cb
Pb
P
R
R-Y
Cr
Pr
Signal
480i / 576i
480p / 576p
720p / 1080i
1080p
Component
O
O
O
O
(50 Hz / 60 Hz only)
HDMI-PC supported mode
(Use HDMI IN 1 for PC mode)
Resolution
640 x 350
720 x 400
640 x 480
800 x 600
1024 x 768
1152 x 864
1360 x 768
1280 x 1024
1920 x 1080
Horizontal
Frequency (kHz)
31.468
31.469
31.469
37.879
48.363
54.348
47.712
63.981
67.50
Vertical
Frequency
(Hz)
70.09
70.08
59.94
60.31
60.00
60.053
60.015
60.020
60.00
(Except for 32LB55*B, 32LB55*U, 32LB56*B,
32LB56*U, 32LB62*U)
38 REGULATORY
REGULATORY
LG Recycling Policy (Only EU)
LG Electronics offers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product and packaging take-back & recycling service voluntarily in some countries. LG Electronics evaluates products’ recyclability at the design step using
LG’s recyclability evaluation tool, with the goal of improving recyclability where practicable. Through these activities,
LG seeks to contribute to conserving natural resources and protecting the environment.
For more information about the LG Recycling Policy, please visit our global site at http://www.lg.com/global/sustain-
ability/environment/take-back-recycling
Energy Saving
Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills. The following indications allow to reduce power consumption when the television is not being watched: y Turning the television off at its mains supply, or un-plugging it, will cut energy use to zero for all televisions, and is recommended when the television is not being used for a long time, e.g. when on holiday, y Putting the television into standby mode, will reduce energy consumption, but will still draw some power, y Reducing the brightness of the screen will reduce energy use.
Disposal of waste batteries (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.
By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery.
The recycling of the materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.
To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact your local authority, your household waste disposal service or the shop where you purchased the product.
REGULATORY 39
EU ecolabel (Only EU ecolabel applied model)
Better for the environment...
y High Energy Efficiency y Reduced CO2 emissions y Designed to facilitate repair and recycling
... better for you.
EU Ecolabel : PL/22/004
LGE announced the ‘LG Declaration for a Cleaner Environment ‘in 1994, and this ideal has served as a Guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertaike Environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the Concept of environment- friendly through whole process from getting raw materials, production, transportation, usage and end-of-life. These environmental characteristics are endorsed by the award of the European Commission as approval of the product environmental status for energy saving. Facilities for recycling and a host of other features.
The full list of criteria and more information on the eco label can be found at the web-site address : http://www.ecolabel.eu
Restriction of Hazardous Substances (Only Ukraine)
Обмеження України на наявність небезпечних речовин
y The equipment complies with requirements of the Technical Regulation, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
y Устаткування відповідає вимогам технічного регламенту щодо обмеженного використання небезпечних речовин в електричному і електронному обладнанні.
Isolator (Only Sweden, Norway)
y “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” y “Utrustning som är kopplad till skyddsjord via jordat vägguttag och/eller via annan utrustning och samtidigt är kopplad till kabel-TV nät kan i vissa fall medföra risk för brand.
För att undvika detta skall vid anslutning av utrustningen till kabel-TV nät galvanisk isolator finnas mellan utrustningen och kabel-TV nätet.” y “Utstyr som er koplet til beskyttelsesjord via nettplugg og/eller via annet jordtilkoplet utstyr - og er tilkoplet et kabel-TV nett, kan forårsake brannfare.
For å unngå dette skal det ved tilkopling av utstyret til kabel-TV nettet installeres en galvanisk isolator mellom utstyret og kabel-TV nettet.”
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this information to your dealer when requiring any service.
MODEL
SERIAL
Please contact LG First.
If you have any inquiries or comments, please contact LG customer information centre.
Country
Latvija
Customer Information Centre
Service
0 810 144 131
015 200 255
0032 15 200255
07001 54 54
810 555 810
8088 5758
0800 0 54 54
3220 54
01806 11 54 11
(0,20€ pro Anruf aus dem Festnetz der DTAG;
Mobilfunk: max. 0,60€ pro Anruf)
Country
801 11 200 900,
210 4800 564
06 40 54 54 54
0818 27 6955
199600099
8 820 0071 1111
80200201
880008081
Service
0900 543 5454
800 187 40
801 54 54 54
808 78 54 54
031 228 3542
0850 111 154
902 500 234
0770 54 54 54
0848 543 543
0844 847 5454
8 800 200 7676
800 9990
0 800 303 000
8 8000 805 805,
2255(GSM)
8 800 120 2222
8 0000 710 005
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Flat 81.3 cm (32") Direct-LED
- HD 1366 x 768 pixels 16:9
- DVB-C2, DVB-S2, DVB-T
- Ethernet LAN
- 37 W