Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
AZ1
Contents
1Important
2
2 Your CD Soundmachine
4
3 Get started
7
Know these safety symbols
Hearing safety
2
3
Introduction4
What's in the box
4
Overview of the product
5
Use the shoulder strap
Power supply
Turn on
Select a source
Store FM radio stations automatically
4 Play from a disc or USB
Play a disc
Play from a USB device
Control play
Program tracks
7
7
8
8
8
9
9
9
9
10
8 Adjust volume and sound effect
15
9 Other features
16
10 Product information
18
11Troubleshooting
20
12Notice
21
Adjust volume
Select a preset sound effect
Adjust bass level
Turn the instant power boost on or off
Mix sound with a microphone/guitar
Listen to an external audio device
Set sleep timer
Listen through a headphone
Specifications
15
15
15
15
16
16
17
17
18
General20
About Bluetooth device
20
Compliance21
Care of the environment
21
Trademark notice
21
5 Play from Bluetooth-enabled
devices11
Connect a device
Play from Bluetooth device
Clear the pairing information
11
12
12
6 Play from iPod/iPhone/iPad
13
7 Listen to radio
14
Compatible iPod/iPhone/iPad
Listen to the iPod/iPhone/iPad
Charge the iPod/iPhone/iPad
13
13
13
Tune to FM radio stations
14
Program FM radio stations automatically 14
Program FM radio stations manually
14
Select a preset radio station
14
Show RDS information
14
EN
1
1Important
•
Know these safety symbols
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING: To reduce the risk of fire or electric
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids,
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Warning
•• Never remove the casing of this product.
•• Never lubricate any part of this product.
•• Never place this product on other electrical equipment.
•• Keep this product away from direct sunlight, naked
flames or heat.
•• Never look into the laser beam inside the product.
•• Make sure that you always have easy access to the
power cord, plug or adaptor to disconnect the product
from the power.
•
•
2
Make sure that there is enough free space
around the product for ventilation.
Only use attachments or accessories
specified by the manufacturer.
EN
•
•
•
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
product:
• Install all batteries correctly, + and - as
marked on the product.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Batteries (packed or installed) shall not
be exposed to excessive heat such as
sunshine, fire or the like.
• Remove batteries when the product is
not used for a long time.
The product shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
product (e.g. liquid filled objects, lighted
candles).
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable. Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Note
•• The type plate is located inside the battery
compartment.
Hearing safety
Listen at a moderate volume.
• Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute. The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
• Sound can be deceiving. Over time your
hearing 'comfort level' adapts to higher
volumes of sound. So after prolonged
listening, what sounds 'normal' can actually
be loud and harmful to your hearing. To
guard against this, set your volume to a safe
level before your hearing adapts and leave
it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even
at normally 'safe' levels, can also cause
hearing loss.
• Be sure to use your equipment reasonably
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as your
hearing adapts.
• Do not turn up the volume so high that
you can't hear what's around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations.
EN
3
2 Your CD
Soundmachine
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this product, you can
• enjoy audio from discs, USB devices,
your Bluetooth-enabled devices, or other
external audio devices;
• listen to FM radio stations;
• charge your mobile devices; and
• mix sound with a microphone or guitar.
What's in the box
Check and identify the contents of your
package:
• Main unit
• Power cord
• Shoulder strap
• Short user manual
• Safety and notice leaflet
4
EN
Overview of the product
pon m
lk
j
8*9
i
h
g
f
e
68592++6
a
C D S O U N D M A C H I N E A Z1
b
c
d
8*9
685-
92++6
q
r s
a Disc compartment
b MIC/GUITAR switch
• Switch to microphone or guitar mode.
c MIC/GUITAR LEVEL
• Adjust the volume level of the
connected microphone or guitar.
t
uv
h SOUND
• Select a preset sound setting.
i MAX SOUND
• Turn the instant power boost on or off.
j FM antenna
• Improve FM reception.
d BASS LEVEL
• Adjust the bass level.
k Display panel
• Show status.
e VOLUME
• Adjust volume.
l NFC tag
• Connect to a device with NFC feature.
f SOURCE
• Select an audio source: FM tuner,
Bluetooth, Audio in, Disc, or USB.
m Micro USB socket
• Connect a USB storage device.
g
• Turn on the product or switch to
standby mode.
n
• Connect a headphone.
o AUDIO IN
• Connect an external device.
EN
5
p MIC/GUITAR socket
• Connect a microphone or guitar.
q
r
s
t
/
• Skip to the previous or next album.
• Select a preset radio station.
• Stop play or erase a program.
• In Bluetooth mode, clear Bluetooth
pairing information.
• In Bluetooth mode, disconnect a
Bluetooth device.
• Pause or resume play.
/
• Skip to the previous or next track.
• Search within a track.
• Tune to a radio station.
u MODE/RDS
• Select a play mode.
• For FM radio stations with RDS
service: display RDS information.
v PROG/SLEEP
• Program tracks.
• Program radio stations.
• Set sleep timer.
6
EN
3 Get started
Note
•• Batteries are not supplied with the accessories.
Always follow the instructions in this chapter in
sequence.
1
2
Use the shoulder strap
3
Open the battery compartment.
Insert 8 batteries (type: R20/ D CELL/ UM
1) with correct polarity (+/-) as indicated.
Close the battery compartment.
A shoulder strap is provided for carrying this
product. Follow the illustration to attach the
shoulder strap to each end of the product.
C D S O U N D M A C H I N E A Z1
AC power
Warning
•• Risk of product damage! Make sure that the power
Power supply
Either AC power or battery can be used as
power supply of this product.
Battery power
supply voltage corresponds to the voltage printed on
the back or the underside of the product.
•• Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
Connect the AC power cord to:
• the AC~ MAINS socket on the unit.
• the wall outlet.
Caution
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Batteries contain chemical substances, so they should
$&a0$,16
be disposed of properly.
EN
7
Turn on
Press to turn on the product.
»» The product switches to the last
selected source.
Switch to standby mode
The product switches to standby mode in the
following situation:
• Press again;
• In disc mode, there is no disc for 15
minutes;
• Music playback is stopped for 15 minutes;
or
• USB, Bluetooth, or other external devices
are disconnected with this product for 15
minutes.
Select a source
Press SOURCE repeatedly to select a source:
FM tuner, Bluetooth, AUDIO IN, Disc, or USB.
Store FM radio stations
automatically
Note
•• For better reception, fully extend and adjust the
position of the antenna.
When the product is powered on and no radio
stations are stored, the product prompts you to
store FM radio stations automatically.
1
8
Connect the product to the power supply.
»» [AUTO INSTALL - PRESS PLAY,
STOP CANCEL] (to install stations
automatically, press
; to cancel,
press ) is displayed.
EN
2
Press
to start full scan.
»» The product automatically stores FM
radio stations with sufficient signal
strength.
»» After all stations are stored, the
first preset station is broadcast
automatically.
»» If no radio stations are found, [CHECK
ANTENNA] (check antenna) scrolls
on the display.
4 Play from a disc
or USB
1
Insert the USB device into the micro USB
socket.
Play a disc
Note
•• Make sure that the disc contains playable audio content.
1
2
On the top panel, pull up to open the disc
compartment.
2
Insert a disc with the printed side facing up,
then close the disc compartment.
Press SOURCE repeatedly to select USB
source.
»» Play starts automatically. If not, press
.
CD
Control play
During play, follow the instructions below to
control play.
3
Press SOURCE repeatedly to select the
disc source.
»» Play starts automatically.
Play from a USB device
Button
/
/
Note
•• Make sure that the USB device contains playable audio
content.
MODE
Function
Press to skip to the previous or next
track.
Press and hold to fast forward or fast
reverse the track during playback,
then release to resume play.
Press to skip to the previous or next
album.
Press to start or pause play.
Press to stop play.
Press repeatedly to select:
: Play the current track repeatedly.
(for MP3 tracks): Play the
currect album repeatedly.
: Play all tracks repeatedly.
: Play all tracks randomly.
OFF: Return to normal play.
EN
9
Program tracks
In CD or USB mode, you can program a
maximum of 20 tracks.
1
2
3
4
5
When playback is stopped, press and
hold PROG for 2 seconds to activate the
program mode.
»» [PROG] (program) blinks on the
display.
For MP3 tracks, press
album.
/
to select an
Press
/
to select a track number,
then press PROG to confirm.
Repeat step 2-3 to program more tracks.
Press
to play the programmed tracks.
»» During play, [PROG] (program) is
displayed.
• To erase the program, press
10
EN
twice.
5 Play from
Bluetoothenabled devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
Connect a device
Note
•• Make sure that your Bluetooth device is compatible
with this product.
•• Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
•• The product can memorize a maximum of 8 paired
devices.
•• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•• Any obstacle between this product and a Bluetooth
device can reduce the operational range.
•• Keep away from any other electronic device that may
cause interference.
Connect a device manually
Note
•• The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
1
2
Press SOURCE repeatedly to select [BT]
source.
»» [NO BT] (no Bluetooth device) is
displayed.
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3
When [PHILIPS AZ1] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password “0000”.
»» After successful pairing and connection,
the product beeps twice.
To disconnect the Bluetooth-enabled device:
• Press and hold for 3 seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
To reconnect the Bluetooth-enabled device:
• For a paired Bluetooth device on which
the automatic reconnection is enabled,
this product reconnects with it once it is
detected.
• For a paired Bluetooth device that does
not support the automatic reconnection,
reconnect it with this product manually.
To connect another Bluetooth-enabled device:
• Disable Bluetooth on the current device,
and then connect another device.
Connect a device through NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this product easily.
1
2
3
Press SOURCE repeatedly to select [BT]
source.
Enable the NFC feature on your Bluetooth
device (see the user manual of the device
for details).
Touch the NFC tag on the top of the
product with the back of your Bluetooth
device.
EN
11
C D S O U N D M AC H I N E A Z1
4
5
On your Bluetooth device, accept the
pairing request with "AZ1". If necessary,
input "0000" as the pairing password.
Follow the on-screen instructions to
complete the pairing and connection.
»» After successful pairing and connection,
the product beeps twice.
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
»» Audio streams from your Bluetooth
device to the product.
Clear the pairing information
In Bluetooth mode, press and hold for 8
seconds.
»» All the Bluetooth pairing information
is erased.
12
EN
6 Play from iPod/
iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this product.
Compatible iPod/iPhone/iPad
The product supports the following iPod,
iPhone, and iPad models:
Made for.
• iPod touch (2nd, 3rd, 4th, and 5th
generation)
• iPod classic
• iPod nano (4th, 5th, 6th, and 7th
generation)
• iPhone 5S
• iPhone 5C
• iPhone 5
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPad air
• iPad mini with Retina display
• iPad mini
• iPad 4
• iPad 3
• iPad 2
• iPad
3
Play audio on the iPod/iPhone/iPad.
»» Audio comes from this product.
• To pause or resume play, press
.
• To skip to the previous or next track,
press
/ .
Charge the iPod/iPhone/iPad
Once connected, the iPod/iPhone/iPad begins
to charge.
Tip
•• You can also charge other mobile phones through the
micro USB socket.
Listen to the iPod/iPhone/
iPad
1
2
Press SOURCE repeatedly to select USB
mode.
Connect this product with your iPod/
iPhone/iPad through the micro USB socket.
»» Once the Apple device is detected,
[USB DOCK] (USB dock) is displayed.
EN
13
7 Listen to radio
Program FM radio stations
manually
Note
Tune to FM radio stations
Note
•• For better reception, fully extend and adjust the
position of the antenna.
1
2
3
Press SOURCE repeatedly to select FM
tuner source.
•• To overwrite a programmed radio station, store
another station in its place.
1
2
3
Press and hold
/
until the frequency
starts to change.
»» [SEARCH] (search) is displayed.
Tune to a radio station.
Press and hold PROG for 3 seconds to
activate programming.
»» [PROG] blinks on the display.
Press / to allocate a number to this
radio station, and then press PROG to
confirm.
»» The preset number and the frequency
of this radio station are displayed.
»» The product tunes to a station with
strong reception automatically.
4
Repeat step 2 to tune to more stations.
• To tune to a station manually, press
/
repeatedly until you find better
reception.
Select a preset radio station
Program FM radio stations
automatically
Note
•• You can program a maximum of 30 preset radio
stations.
In FM tuner mode, press and hold
for 2
seconds to activate automatic programming.
»» [AUTO] (auto) is displayed.
»» All available radio stations are stored
automatically, then the first stored
radio station is broadcast.
Repeat steps 1-3 to program more
stations.
In tuner mode, press
number.
/
to select a preset
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon is displayed.
1
2
Tune to an RDS station.
Press RDS repeatedly to scroll through the
following information (if available):
»» Program service
»» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
»» Radio text message
»» Time
14
EN
8 Adjust volume
and sound effect
Adjust volume
During play, rotate VOLUME knob to increase
or decrease volume.
Select a preset sound effect
During play, press SOUND repeatedly to select
a preset sound effect:
• [FLAT] (flat)
• [JAZZ] (jazz)
• [POP] (pop)
• [ROCK] (rock)
• [CLASSIC] (classic)
Adjust bass level
During play, rotate the BASS LEVEL knob to
adjust the bass level.
Turn the instant power boost
on or off
During play, press MAX SOUND repeatedly to
select an option.
• [MAX ON] (max on): Turn on the instant
power boost.
• [MAX OFF] (max off): Turn off the instant
power boost.
EN
15
9 Other features
Mix sound with a
microphone/guitar
2
3
4
By using a microphone or an acoustic/electrical
guitar, you can mix its sound with an audio
source.
Caution
•• Do not connect a bass guitar to the MIC/GUITAR
socket, as it may damage this product.
Note
•• Make sure that you have switched
1
Play your guitar or sing through the
microphone.
• To adjust the volume of the source,
rotate the VOLUME knob.
• To adjust the volume level of the
microphone or guitar, rotate the MIC/
GUITAR LEVEL knob.
With this product, you can listen to an external
audio device such as an MP3 player.
1
Connect a microphone or a guitar to the
MIC/GUITAR socket on this product.
3
EN
Select an audio source (FM tuner/
Bluetooth/AUDIO IN/Disc/USB) and start
play.
Listen to an external audio
device
2
16
Adjust the MIC/GUITAR switch to the
MIC or GUITAR position.
Connect an audio input cable with a 3.5
mm connector on both ends to
• the AUDIO IN socket on this product,
and
• the headphone socket on an external
device.
Press SOURCE repeatedly to select the
AUDIO IN source.
Play audio on the external device (refer to
its user manual).
Set sleep timer
1
2
Turn on the product.
Press SLEEP repeatedly to select a period
(in minutes).
»» The product switches to standby
mode automatically after the preset
period.
To deactivate the sleep timer:
• Press SLEEP repeatedly until [OFF]
(off) appears.
Note
•• The sleep timer setting will be canceled if AC power is
disconnected.
Listen through a headphone
Plug a headphone into the
product.
socket on the
EN
17
10Product
information
Note
•• Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power
Signal to Noise Ratio
Input Sensitivity
- AUX IN
- Guitar IN
- Mic IN
2 X 20 W RMS
> 62 dBA
0.5 V/ 47 KΩ
1.5 V/ 47 KΩ
1.5 mV/ 600 Ω
Disc
Total Harmonic Distortion
Frequency Response
S/N Ratio
<1.5 %
60Hz -16kHz,
-3 dB
>57 dB
Tuner
Tuning Range
Tuning Grid
Total Harmonic
Distortion
FM: 87.5 - 108 MHz
FM: 50 KHz
< 5%
Bluetooth
Bluetooth version
Supported profiles
Range
18
EN
V2.1+EDR
A2DP, AVRCP v1.4
10 m (Free space)
General information
Power supply
- AC Power
- Battery
Operation Power
Consumption (AC
mode)
Standby Power
Consumption
Supported Guitar
Dimensions
- Main Unit
(W x H x D)
Weight - Main Unit
100 - 240V ~, 50/60 Hz
8 x 1.5 V R20/D Cell/
UM 1
30 W
< 0.5 W
Acoustic guitar; Electrical
guitar
245 X 130 X 212 mm
6.8 kg
USB playability information
Compatible USB devices:
• USB flash memory (USB V2.0)
• USB flash players (USB V2.0)
• memory cards (requires an additional
card reader to work with this unit)
Supported formats:
• USB or memory file format: FAT16,
FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• Directory nesting up to a maximum of
8 levels
• Number of albums/ folders: maximum
99
• Number of tracks/titles: maximum 999
• File name in Unicode UTF8 (maximum
length: 16 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and is not be shown in the
display.
• Unsupported file formats are skipped.
For example, Word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
Supported MP3 disc formats
•
•
•
•
•
ISO9660, Joliet
Maximum title number: 999 (depending on
file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
Supported Bit-rates: 32~320 (kbps),
variable bit rates
Maintenance
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
RDS program types
NO TYPE
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
MOR M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TES
ALARM
No RDS programme type
News services
Politics and current affairs
Special information programs
Sports
Education and advanced
training
Radio plays and literature
Culture, religion and society
Science
Entertainment programs
Pop music
Rock music
Light music
Light classical music
Classical music
Special music programs
Weather
Finance
Children’s programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
Alarm Test
Alarm
EN
19
11Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
General
No power
•• Ensure that the AC power plug of the unit
is connected properly.
•• Ensure that there is power at the AC outlet.
•• Insert the batteries with their polarities
(+/– signs) aligned as indicated.
•• Replace the battery.
No sound or poor sound
•• Adjust volume on the product.
•• Adjust volume on the connected device.
No response from the unit
•• Take out the batteries and turn on the unit
again.
•• Disconnect and reconnect the AC power
plug, then turn on the unit again.
No disc detected
•• Insert a disc.
•• Check if the disc is inserted upside down.
•• Wait until the moisture condensation at
the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Poor radio reception
•• Increase the distance between the unit and
your TV or VCR.
•• Fully extend the FM antenna.
20
EN
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
•• The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
Cannot connect with the device.
•• The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
•• This product is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects
constantly.
•• The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
•• For some devices, Bluetooth connection
may be deactivated automatically as a
power-saving feature. This does not indicate
any malfunction of this product.
12Notice
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Compliance
Hereby, WOOX Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC. You can find the
Declaration of Conformity on www.philips.com/
support.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademark notice
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
EN
21
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specifically to
iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
This apparatus includes this label:
This is CLASS II apparatus with double
insulation, and no protective earth provided.
22
EN
Specifications are subject to change without notice.
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used by WOOX Innovations Limited
under license from Koninklijke Philips N.V.
AZ1_12_UM_V1.0