Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
NTRX700
Contents
9 Adjust volume level and sound
effect16
1Important2
Safety2
Notice3
2 Your Mini Hi-Fi System4
Introduction4
What's in the box
4
Overview of the main unit
5
Overview of the remote control
6
3Connect8
Connect FM antenna
Connect AM antenna
Connect speakers
Connect speaker LED
Connect power
8
8
8
9
9
4 Get started10
Prepare the remote control
Turn on
10
10
Apply AUTO DJ effect
Apply DJ effects manually
Adjust volume level
Select a preset sound effect
Enhance bass
Apply NX Bass
Adjust equalizer settings
Mute sound
16
16
16
16
16
17
17
17
10 Other features18
Mix sound
18
USB record
18
Karaoke19
11 Product information20
Specifications
20
USB playability information
20
Supported MP3 disc formats
21
Maintenance21
12Troubleshooting22
5 Play from a disc or USB11
Play disc
Play from a USB A device
Play options
11
11
12
6 Play audio through Bluetooth13
7 Listen to an external device14
Listen to an MP3 player
Listen to other audio devices
14
14
8 Listen to radio15
Tune to a radio station
Program radio stations manually
Program radio stations automatically
Select a preset radio station
Change AM tuning grid
15
15
15
15
15
EN
1
1Important
Safety
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
specified by the manufacturer.
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls at tion to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING: To reduce the risk of fire or electric
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids,
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Install in accordance with the
manufacturer's instructions.
2
EN
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to
the unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
• Batteries (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire or
the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
q Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•• Never remove the casing of this device.
•• Never lubricate any part of this device.
•• Never place this device on other electrical equipment.
•• Keep this device away from direct sunlight, naked
flames or heat.
•• Never look into the laser beam inside this device.
•• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Notice
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
This apparatus includes this label:
Note
•• The type plate is located on the back of the unit.
EN
3
2 Your Mini Hi-Fi
System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With this unit, you can enjoy audio from discs,
USB devices, Bluetooth devices or external
devices. You can also listen to radio stations
through it.
To enrich sound, this unit offers you these
sound effects:
• Digital Sound Control (DSC)
• Dynamic Bass Boost (DBB)
• DJ effects
• NX Bass Enhancement
The unit supports the following media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit x 1
• Speaker x 1
• Remote control with 2 AAA batteries
• FM wire antenna x 1
• AM loop antenna x 1
• Short user manual
4
EN
Overview of the main unit
{
a
z
y
b
c
d
e
f
g
h
i
j
k
l
x
c
e
w
v
u
t
s
m
no
a Disc slot
b DELETE
• In USB A mode, delete audio files
stored on a USB device.
c
A/B
• Jacks for USB mass storage devices.
d REC
• Record to a USB.
e AUDIO IN A/B
• Audio input jack (3.5mm) for an
external audio device.
f MIC 1/2 (Microphone ports)
• Jack for a microphone.
g MIC volume dial
• Rotate to adjust microphone volume.
h AUX
• Select an audio source from DVD, PC,
TV or GAME.
pq n r
i Display panel
• Show status.
j AUTO DJ
• In USB A mode, apply AUTO DJ effect
automatically.
k DJ EFFECT
• In Disc/USB A/Bluetooth/Tuner/Audio
in A mode, apply DJ effects manually.
l DJ EFFECT dial
• Increase/decrease DJ effect and AUTO
DJ effect level.
m Control play panel (left)
• Control play for Source A modes
(including Disc, USB A, Bluetooth, Tuner
and Audio in A modes).
n Source selection dials
• Select a source.
o
(Left)
• In Disc/USB A mode, stop playing.
EN
5
• In Disc/USB A mode, erase programs.
• Exit the process of recording.
• In Tuner mode, switch between FM and
AM bands.
p CROSS FADER ASSIGN
• Adjust the left/right channel balance
during playback.
Overview of the remote
control
(Right)
• In USB B mode, stop playing.
a
r Control play panel (right)
• Control play for Source B modes
(including USB B and Audio in B
modes).
b
s Volume dial
• Rotate to increase/decrease volume.
e
s
r
q
o
e
• Turn on the unit or switch to standby
mode.
f
g
p
o
h
n
• Turn on or off speaker lighting effect.
i
j
k
m
l
q
t
u
v Custom Equalizer
• Move the slider bars to adjust the
equalizer settings for each of the 5
frequency ranges.
w NX Bass button
• Turn on NX Bass effect.
c
d
a
• Turn on the unit or switch to standby
mode.
x DBB
• Turn on/off dynamic bass
enhancement.
b Source selection keys
• Select a source.
y Sound effects keys
• Select a preset sound equalizer setting.
c USB RECORD
• Record to a USB device.
z
d
• Open or close the disc slot.
{ Bluetooth indicator
e
• In Disc/USB A/Bluetooth mode, start
or pause play.
/
• In Disc/USB A/Bluetooth mode, skip to
the previous/next track.
f AUTO DJ
• In USB A mode, automatically apply
AUTO DJ effect.
6
EN
g
• In Disc/USB A mode, stop playing.
• In Disc/USB A mode, erase programs.
• Exit the recording process.
h ALB/PRESET+/• Skip to the previous/next album.
• Select a preset radio station.
i MUTE
• Mute/unmute volume.
j DBB
• Turn on/off dynamic bass
enhancement.
k DSC
• Select a preset sound equalizer setting.
l USB B
• In USB B mode, start or pause play.
m USB B
• In USB B mode, stop play.
n VOL +/• Adjust volume.
o
/
• Adjust radio frequency.
• In Disc/USB A mode, search within a
track.
p LIGHT
• Turn on/off the speaker lighting effect.
q USB DELETE
• In USB A mode, delete audio files
stored on a USB storage device.
r PROG
• Program tracks.
• Program radio stations.
s MODE
• In Disc/USB A mode, select repeat play
or random play.
EN
7
3Connect
Connect FM antenna
Connect the supplied FM antenna to the FM
jack on the back of the main unit.
Connect speakers
Note
•• For optimal sound, use the supplied speakers only.
•• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
Connect AM antenna
1
Assemble the AM loop antenna.
SPEAKERS
OUT ( 3 )
Connect the speakers
Insert the speaker wires completely into the
SPEAKER OUT sockets.
2
8
Connect the AM loop antenna to the AM
jack on the back of the main unit. Adjust
the position of the antenna for optimal
reception.
EN
Connect speaker LED
Tip
•• When you are not using or are transporting the unit, to
keep the power cord organized and above the ground,
fix the power cable with the cable tie on the back panel
of the main unit.
1
2
Find an LED socket on the back of the
main unit.
Insert the connector of the LED wire to
the LED socket.
Connect power
1
2
If your power supply voltage is 110V-127V,
adjust the voltage selector (locate on the
back panel of the unit) to 110V-127V.
Connect the AC power plug to the power
outlet.
Caution
•• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage set on the
voltage selector on the bottom of the unit.
•• Before connecting to the AC power, make sure that you
have completed all other connections.
EN
9
4 Get started
Note
•• If you are not going to use the remote control for a
long time, remove the batteries.
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Note
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
To replace the remote control battery:
1
2
3
10
Open the battery compartment.
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.
EN
•• Do not use old and new or different types of batteries
in combination.
•• Batteries contain chemical substances, so they should
be disposed of properly.
Turn on
Press .
»» The unit switches to the last selected
source.
Switch to standby
Press to switch the unit to standby mode.
»» The backlight on the display panel
turns off.
5 Play from a disc
or USB
Play disc
1
2
3
1
2
3
4
5
6
Press CD to select the disc source.
Load a disc on the disc tray, with the
printed side facing up.
Press
to start play.
• To pause/resume play, press
.
• To stop play, press .
• To select another track, press / .
• To select an album, press ALB/
PRESET+/-.
• To search within a track, press and
hold
/ , then release to resume
normal play.
Insert the USB plug of the device into the
A socket.
Press USB A to select the USB A source.
Slide the CROSS FADER ASSIGN to its
far left.
Press ALB/PRESET+/- to select an album.
Press
/
to select an audio file.
Press
to start play.
• To pause/resume play, press
.
• To stop play, press .
• To search within an audio file, press
and hold
/ , then release to
resume normal play.
Play from a USB B device
Play from a USB A device
1
2
3
4
Note
•• Ensure that the USB device contains playable audio
contents for supported formats.
Insert the USB plug of the device into the
B socket.
Rotate the Source dial to select the USB
B source.
Slide the CROSS FADER ASSIGN to its
far right.
Use the control play panel (right) on the
top of the main unit for play:
• To start play, press
.
• Press +/- to select an album.
• Press
/
to select an audio file.
• To pause/resume play, press
.
• To stop play, press (right) on the
main unit.
EN
11
• To search within an audio file, press
and hold
/ , then release to
resume normal play.
Delete from a USB device
1
2
3
During play from a USB device, press /
to select an audio file.
• To delete an audio folder, in the stop
position, press ALB/PRESET+/- to
select an audio folder.
Press USB DELETE.
»» A confirmation message is displayed.
While the message is displayed, press USB
DELETE again to confirm.
• To cancel, press .
Note
•• The function is not available in USB B mode.
Play options
Repeat and random play
1
2
Press MODE repeatedly to select:
• REP-1: the current track is played
repeatedly.
• REP-ALL: all tracks are played
repeatedly.
• SHUFFLE: all tracks are played
randomly.
To return to normal play, press MODE
repeatedly until play modes are no longer
displayed.
Note
•• Shuffle play cannot be selected when you play
programmed tracks.
•• This function is only available in Disc and USB A modes.
12
EN
Program tracks
You can program a maximum of 40 tracks.
1
2
3
4
5
6
In Disc/USB A mode, press
playing.
to stop
Press PROG to activate program mode.
»» A position number flashes on the
screen.
For MP3 tracks, press ALB/PRESET+/- to
select an album.
Press / to select a track number, then
press PROG to confirm selection.
Repeat steps 2 to 4 to select and store all
tracks to program.
Press
to play the programmed track.
• To erase the program, press twice.
Note
•• The function is not available in USB B mode.
6 Play audio
through
Bluetooth
The unit uses Bluetooth wireless technology to
stream music from your Bluetooth device to
the system.
Search for
devices
Note
•• Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
•• The effective operation range between the unit and the
paired phone is approximately 10 meters (30 feet).
•• Any obstacle between the unit and the phone can
reduce the operational range.
•• Keep this unit away from other electronic devices that
may cause interference.
1
2
3
4
5
Tap [Accept] (Accept) to start pairing your
device with the unit.
Press Bluetooth to turn on Bluetooth
function of the unit.
»» The Bluetooth indicator blinks.
On your Bluetooth, go to [Settings]
(Settings)> [Wireless and networks]
(Wireless and networks)> [Bluetooth
settings] (Bluetooth settings).
Tap [Bluetooth] (Bluetooth) to turn on
Bluetooth function of your device.
Accept
Tap [Search for devices] (Search for
devices).
»» A Bluetooth pairing request appears.
»» [PHILIPS NTRX700] (Philips
NTRX700) is displayed.
»» If connected successfully, a different
Bluetooth icon can be found on the
top of the screen.
EN
13
7 Listen to an
external device
You can listen to an external audio device
through the speakers of this unit.
NTRX700
Listen to an MP3 player
1
2
»» After Bluetooth connection, you can
enjoy audio on your phone through
the unit.
3
Tip
Connect a 3.5mm audio link cable(not
supplied) to:
• the AUDIO IN A jack (3.5mm) on the
unit.
• the headphone jack on the MP3 player.
Start to play the device (refer to the
device user manual).
Tip
•• Different devices may have different way to enable
Bluetooth function.
Press AUDIO A to select the MP3 link
source.
•• If the MP3 player is connected to the AUDIO IN B
jack, use the Source selection dial on the main unit to
select the Audio In B source.
Listen to other audio devices
You can connect a PC or other audio devices.
1
2
3
14
EN
Press AUX repeatedly to select from DVD,
PC, TV or GAME source.
Connect the audio cables (white/red, not
supplied) to:
• the AUX jacks (white/red) on the back
of the main unit.
• the headphone jack on the PC, or
AUDIO OUT jacks on an external
device.
Start to play the device (refer to the
device user manual).
8 Listen to radio
Tune to a radio station
1
2
3
Program radio stations
automatically
In the tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
»» [AUTO] (auto) is displayed.
Press TUNER on the remote control, or
(Left) on the main unit repeatedly to select
FM or AM.
»» The unit automatically stores radio
stations with sufficient signal strength.
»» After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
Press and hold
/ .
»» [SEARCH] (search) is displayed.
»» The radio automatically tunes to a
station with a strong signal.
Repeat step 2 to tune to more stations.
• To tune to a station with a poor signal,
press
/
repeatedly until you find
optimal reception.
Program radio stations
manually
Select a preset radio station
In tuner mode, press ALB/PRESET+/- to select
a preset number.
Tip
•• Position the antenna as far as possible from TV, VCR or
other radiation source.
•• For optimal reception, fully extend and adjust the
position of the antenna.
You can program a maximum of 30 FM and 10
AM preset radio stations.
1
2
3
4
Tune to a radio station.
Press PROG to activate program mode.
»» A position number is displayed.
Change AM tuning grid
Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROG to confirm selection.
In some countries, the AM radio frequency step
between adjacent channels is 10 kHz (9 kHz in
some areas).
Repeat the above steps to program other
stations.
Tip
•• To overwrite a programmed station, store another
station in its place.
1
2
Select the tuner source.
Press and hold for more than 5 seconds.
»» The frequency step is changed to 9
kHz or 10 kHz.
»» All preset stations are erased and reprogrammed in AM mode.
EN
15
9 Adjust volume
level and sound
effect
Apply AUTO DJ effect
The AUTO DJ function adds various sound and
playback effects to your music automatically:
Effects
Auto
effect
Cross
fade
Back spin
Loop
Beat box
Voice
sampling
•
•
•
Description
Add different sound effects to the
music automatically.
Fade one piece of music out while
fading another piece of music in at
the same time.
Rewind the music to a previous
point.
Repeat playing a section of the
music.
Add beat box effects to the music.
Add a sound during playback.
To apply AUTO DJ effects, press AUTO DJ
repeatedly to select from:
• [METAL] (Metal)
• [PARTY] (party)
To turn off the AUTO DJ effects, press
AUTO DJ repeatedly to select [AUTO DJ
OFF] (AUTO DJ off).
To adjust the occurrence frequency and
sound level of the added effects, rotate the
DJ EFFECT dial.
Note
•• Such effects are added by the application automatically
and randomly.
•• The function is only available in USB A mode.
Apply DJ effects manually
You can also add preset DJ effects by yourself.
• Press DJ EFFECT repeatedly to select from
the following effects:
• [SCRATCH] (scratch)
• [REVERB] (reverb)
• [BEAT BOX] (beat box)
• [YEAH] (yeah)
• To turn off the DJ effects, press DJ EFFECT
repeatedly to select [OFF] (off).
• To adjust the sound level of the added
effects, rotate the DJ EFFECT dial.
Note
•• The function is not available in USB B and Audio in B
modes.
Adjust volume level
1
During play, press VOL +/- to increase/
decrease the volume level.
Select a preset sound effect
The DSC (Digital Sound Control) enables you
to enjoy special sound effects.
During play, press DSC repeatedly to select:
• [ROCK] (rock)
• [POP] (pop)
• [TECHNO] (techno)
• [JAZZ] (jazz)
• [SAMBA] (samba)
Enhance bass
The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
DSC selection. You can manually select the
16
EN
DBB setting that best suits your listening
environment.
• During play, press DBB repeatedly to
select:
• DBB 1
• DBB 2
• DBB 3
• DBB OFF
Mute sound
During play, press MUTE to mute/unmute
sound.
Apply NX Bass
NX Bass effect adds clean and lively
characteristics to your music with very low
background noise.
1
2
Open the cover on the NX Bass button.
Press the NX Bass button. The sound will
change in 3 stages:
• Stage 1: The sound volume increases
to a higher level and stays at this level
for 5 seconds. The display panel shows
[FIRING] (firing);
• Stage 2: The sound volume gradually
decreases to its original level in 10
seconds. The display panel shows
[DISCHARGING] (discharging);
• Stage 3: The sound volume keeps
at normal level for 40 seconds. The
display panel shows [RECHARGING]
(recharging).
Note
•• To reactivate the NX bass effect, press the button again
after the 3 stages are completed.
Adjust equalizer settings
Custom Equalizer lets you increase/decrease
the gain for specific frequency ranges, and adjust
audio output to your own preferences.
• Move the slider bars to adjust the equalizer
settings for each of the 5 frequency ranges.
EN
17
10Other features
in this folder. Files and subfolders are named
numerically in the order in which they are
created.
Note
Mix sound
You can play from a Source A source (Disc/USB
A/Bluetooth/Tuner/Audio in A mode) and from
a Source B source (USB B/Audio in B mode) at
the same time.
1
2
3
Play from a Source A source.
• Disc - Select the Disc mode and load a
disc. Select a track and start playing.
• Tuner - Tune to a radio station.
• Audio in A - Select the Audio in A
source, and then connect and start to
play an external device.
• USB A - Select the USB A mode, and
connect a USB device to
A socket.
Select a track and start playing.
• Bluetooth - Connect and play from a
Bluetooth device.
Play from a Source B source (Audio in B/
USB B mode).
• Audio in B - Select the Audio in B
source, and then connect and start to
play an external device.
• USB B- Select the USB B mode, and
connect a USB device to
B socket.
Select a track and start playing.
Use the CROSS FADER ASSIGN to
adjust the left/right channel balance during
playback.
USB record
Audio CD tracks, MP3 files, radio, and audio
from external devices are recorded in .mp3
format.
The first time you record to a USB device,
a folder is automatically created in the USB
device. Each time you record to a USB device,
the recorded files are stored in a subfolder
18
EN
•• This function is only available for
A socket.
Record to a USB device
1
2
3
Connect a USB device to
A socket.
Prepare the source to record from.
• Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• AUDIO IN/AUX - Select the Audio
in/AUX source, and then connect
and start to play an external device.
Karaoke - Singing during karaoke.
• USB B - Connect a "source" USB
device to
B socket. Rotate the
Source selection dial to select the USB
B source, and select an audio file to
play.
Press USB RECORD to start recording.
• For Disc mode, press USB RECORD
repeatedly to select:
A[REC ONE] (record one): the first/
current track is recorded.
B[REC ALL] (record all): all tracks/the
remaining tracks are recorded.
»» Play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press .
Note
•• If the USB device does not have enough memory to
store the audio files, a message about a full memory is
displayed.
•• This function is not available in Mix sound mode.
•• This function is not available when AUTO DJ or DJ
EFFECT effects are applied.
Karaoke
You can connect a microphone and sing along
with a music source.
1
2
3
4
Turn the MIC volume dial to the minimum
level.
Connect a microphone to a microphone
port MIC 1/2 on the unit.
Press CD, or TUNER, or USB A, or
AUDIO A, or AUX to select the source,
and start play.
Sing through the microphone.
• To adjust the volume of the source,
press VOL +/-.
• To adjust the volume of the
microphone, turn the MIC volume dial.
EN
19
11Product
information
Note
Tuning
grid
Number
of presets
FM
AM
100KHz (FM); 9KHz/10KHz (AM)
30 FM, 10 AM
75ohm wire
loop antenna
•• Product information is subject to change without prior
notice.
General information
AC power
Specifications
Amplifier
Total output power
Frequency response
Signal-to- noise ratio
Aux In/Mp3 Link
1100 W (RMS)
60 Hz - 16kHz
>65 dBA
1500mV/2000mV
Operation power
consumption
Standby power
consumption
USB direct
USB port
Dimensions
Main Unit (W x H x D)
Weight (without speakers)
110V 127/220V-240V,
50/60Hz
170 W
35 W
Version 2.0/1.1
DC 5V, 500mA
390 x 1137 x
477 mm
26.2 kg
Disc
Laser type
Disc diameter
Support disc
Audio DAC
Total harmonic distortion
Frequency response
S/N ratio
Semiconductor
12cm/8cm
CD-DA, CD-R,
CD-RW, MP3-CD
24Bits / 44.1kHz
<1%
60Hz -16kHz
>65 dBA
Speakers
Speaker Impedance
2 x 3 ohm
Tuner
Tuning
range
20
EN
FM: 87.5 - 108MHz;
AM: 531 - 1602kHz (9KHz); 530 1700KHz (10KHz)
USB playability information
Compatible USB devices:
• USB flash memory (USB 2.0)
• USB flash players (USB 2.0)
• memory cards (requires an additional
card reader to work with this unit)
Supported formats:
• USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• Directory nesting up to a maximum of
8 levels
• Number of albums/ folders: maximum
99
• Number of tracks/titles: maximum 999
• ID3 tag v1.2 or later
• File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3 files,
and is not be shown in the display.
• Unsupported file formats are skipped.
For example, Word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• AAC, WAV, PCM audio files
• WMA files
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
Supported MP3 disc formats
•
•
•
•
•
•
•
ISO9660, Joliet
Maximum title number: 999 (depending on
file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32-320 (kbps),
variable bit rates
ID3 tag v1.2 or later
Directory nesting up to a maximum of 8
levels
Maintenance
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
EN
21
12Troubleshooting
Caution
•• Never remove the casing of this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this unit,
check the following points before requesting
service. If the problem remains unsolved, go to
the Philips web site (www.philips.com/support).
When you contact Philips, ensure that your
unit is nearby and the model number and serial
number are available.
No power
•• Ensure that the AC power plug of the unit
is connected properly.
•• Ensure that there is power at the AC
outlet.
•• To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
operated.
No sound or poor sound
•• Adjust the volume.
•• Check that the speakers are connected
correctly.
•• Check if the stripped speaker wires are
clamped.
Left and right sound outputs reversed
•• Check the speaker connections and
location.
No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
•• Insert the batteries with their polarities
(+/– signs) aligned as indicated.
•• Replace the batteries.
22
EN
••
Aim the remote control directly at the
sensor on the front of the main unit.
No disc detected
•• Insert a disc.
•• Check if the disc is inserted upside down.
•• Wait until the moisture condensation at
the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
Cannot apply sound effects when playing from
a USB B device.
•• USB B mode does not support DBB, DSC,
DJ EFFECT or AUTO DJ effects.
Cannot delete files from a USB B device.
•• USB B mode does not support USB
Delete function.
Poor radio reception
•• Increase the distance between the unit and
your TV or VCR.
•• If the signal is too weak, adjust the antenna
or connect an external antenna for better
reception.
EN
23
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
NTRX700_55_UM_EN_V2.0