Sanus Systems VLF320 flat panel wall mount Instruction manual

Add to my manuals
28 Pages

advertisement

Sanus Systems VLF320 flat panel wall mount Instruction manual | Manualzz
VLF320 INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520 (UK: 0800-056-2853) We’re ready to help!
Scan for easy install video
http://san.us/725
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
1
Does your TV weigh more than 120 lb (54 kg) including accessories?
2
What is your wall made of?
3
120 lb No — Perfect!
(54 kg) Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
Drywall with
wood studs
Solid concrete or
concrete block
Perfect!
Perfect!
?
Call 1-800-359-5520 (UK: 0800-056-2853)
Do you have all of the tools needed?
7/32 in.
(5.5 mm)
Wood
4
Unsure?
3/8 in.
(10 mm)
Concrete
1/2 in.
(13 mm)
Ready to begin?
Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV
owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact
Customer Service at 1-800-359-5520 (UK: 0800-056-2853).
CAUTION: Avoid potential personal injuries and property damage!
2
●
●
●
●
This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
The wall must be capable of supporting five times the weight of the TV and mount combined
Do not use this product for any purpose not explicitly specified by manufacturer
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Dimensions
1.61
40.9
in.
[mm]
2.00
50.8
11.81
299.9
20.80
528.3
0.34
8.6
16.00
406.4
16.00
406.4
24.00
609.6
MIN 4.62 - MAX 30.62
777.8
6.40°
CL
WALL
20.39
518.0
PLATE
1.50
ROLL CONTROL
1.76
44.7
CL
TV
BRACKET
16.54
420.0
0.43
11.0
32.16
816.9
3
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
TV Screws
TV Brackets
M4 x 12mm
02
x4
M6 x 14mm
03
x4
Washers
M4 x 30mm
06
x4
M6 / M8
M4
M6 x 40mm
07
x4
09
10
x4
x4
Spacers
M8 x 16mm
04
x4
M8 x 40mm
08
x4
14mm
M8 x 20mm
01
4
x2
05
x4
11
x4
12
x4
24mm
13
x4
Parts and Hardware for STEP 2
Wall Plate Template
14
Wall Plate
15
x1
x1
Washers
Lag Bolts
Anchors
5/16 in.
16
x4
17
x4
5/16 x 2 3/4 in.
18
x4
5
Parts and Hardware for STEP 3
Arm Assembly
Felt Pads
Wall Plate–
Arm Assembly
Screws
1/4 20 x 1/2 in.
21
Click Caps
x8
23
Wall Plate Covers
24
x4
x2
Hex Keys
TV Bracket–Click Cap
Screws
M3
5/32 in.
M4 x 30mm
19
20
x1
22
x2
25
x2
x1
26
x1
Parts and Hardware for Cable Management
Cable Cover Screws
Cable Cover
R
Cable Cover
Hex Key
M4 x 10mm
28
x1
Cable Covers
30
x8
M 2.5
Wire Management
Cable Ties
L
27
6
x1
29
x2
31
x2
32
x1
STEP 1 Attach Brackets to TV
1-1 Select TV Screws
1-2 Select TV Spacers
Hand thread screws into the threaded inserts on the back of your TV
to determine which screw diameter (M4, M6, or M8) to use.
Spacers and screws are supplied to install your TV bracket.
M4
M6
M8
Determine your preference for spacer configuration when
attaching your TV bracket.
a
b
Do not use spacers if
your TV has a flat back
AND you want your TV
closer to the wall.
CAUTION: Verify adequate thread engagment of the screw
and spacer combination on your TV.
Flat Back
12 13
Use spacers 12 or 13 to
accommodate:
● Round/irregular back TVs
● TVs with inset mounting holes
● Extra space needed for cables
Round Back
Inset Holes
Cables
Too short will not hold the TV and too long will damage the TV.
Too Short
Correct
Too Long
7
1-3 Attach Spacers to TV Brackets
NOTE: Skip this step if your TV has a flat back AND you want your TV closer to the wall.
1.
Press the four shoulder washers 11 through the openings of TV brackets 01 that line up with your TV hole pattern.
2.
Snap the four spacers 12 or 13 you selected in STEP 1-2, onto shoulder washers 11 .
1
01
2
01
12
13
11
8
12
13
11
1-4 Attach TV Brackets to TV
Center the TV brackets 01 over your TV hole pattern as shown, making sure the brackets are level with each other.
Install using the screw and washer combination [a] or [b] you selected for your TV.
NOTE: Use washer 09 for screws 02 and 06 .
Use washer 10 for screws 03 , 04 , 05 , 07 , and 08 .
a
Flat Back
02 03 04 05
09 10
01
b
Round Back / Extra Space
06 07 08
12 13
09 10
9
STEP 2A Attach Wall Plate to Wall Wood Stud Option
CAUTION: Avoid potential personal injuries and property damage!
●
●
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
Minimum horizontal space between fasteners: 16 in. (406 mm)
1.
Stud centers must be verified – not all walls have conventional 16 in. (406 mm) stud spacing. Verify the center of the stud(s) using an awl,
a thin nail, or an edge to edge stud finder.
2.
Level the wall plate template 14 and mark the four hole locations.
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
2
1
Max.
5/8 in.
(16 mm)
10
Min. 16 in.
(406 mm)
14
3.
Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4.
Install the four washers 17 and lag bolts 18 . Tighten all four lag bolts 18 only until the washers 17 are pulled firmly against the wall plate 15 .
CAUTION: Improper use could reduce the holding power of the lag bolts
18 . DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 14.
3
3 in.
(75 mm)
4
17
18
7/32 in.
(5.5 mm)
15
11
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option
CAUTION: Avoid potential personal injuries and property damage!
●
●
●
●
Mount the wall plate 15 directly onto the concrete surface
Minimum solid concrete thickness: 8 in. (203 mm)
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
Minimum horizontal space between fasteners: 16 in. (406 mm)
1.
Position the wall plate template 14 on the wall at your desired height. Level the wall plate and mark the four hole locations.
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
2.
Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
2
3 in.
(75 mm)
14
3/8 in.
(10 mm)
Min.
16 in.
(406 mm)
12
Insert four anchors 16 .
3.
CAUTION: Be sure the anchors
16 are seated flush with the concrete surface.
Install the four washers 17 and lag bolts 18 . Tighten all four lag bolts 18 only until the washers 17 are pulled firmly against the wall plate 15 .
4.
CAUTION: Improper use could reduce the holding power of the lag bolts
18 . DO NOT over-tighten the lag bolts.
4
3
16
18
15
17
13
STEP 3 Attach TV to Wall Plate
3-1 Attach Arm Assembly to Wall Plate
NOTE: Arm assembly 19 can be adjusted side-to-side to customize your TV installation.
1.
Align four holes at the top and four at the bottom of arm assembly 19 to the slots in the wall plate 15 .
2.
Secure the top portion of arm assembly 19 to the wall plate 15 with four screws 21 using hex key 26 .
3.
Secure the bottom portion of arm assembly 19 to the wall plate 15 with four screws 21 using hex key 26 .
1
19
15
2
26
21
3
26
14
21
3-2 Hang TV onto Arm Assembly
HEAVY! You may need assistance with this step.
1.
Hook the TV brackets 01 onto the arm assembly 19 , as shown.
2.
Attach click caps 20 to TV brackets 01 with screws 22 using hex key 25 .
CAUTION: Avoid potential personal injury or property damage! Screws
1
01
19
22 must be installed to secure the TV onto the arm assembly 19 .
2
20
25
22
19 01
15
3-3 Apply Protective Felt Pads
3-4 Attach Wall Plate Covers
Affix self-adhesive felt pads 23 onto the arm
assembly 19 to protect your wall.
Attach wall plate covers 24 onto wall plate 15 .
19
23
24
15
24
16
Manage Cables
1.
Thread your TV cables through the channels in the middle and lower branches of the arm assembly 19 .
2.
Attach cable covers 27 , 28 and 29 to the arm assembly 19 . Secure with screw 30 using hex key 32 .
3.
Route cable ties 31 through the tie holders T .
1
19
2
19
30
32
T
31
29
27
28
17
Adjustments
LEVEL
TILT
Loosen the level screw L using hex key 26 ,
adjust your TV, then tighten the level screw L .
Your TV should adjust easily when moved, then stay in place.
Adjust the tilt tension knob K if your TV naturally tilts up or down.
NOTE: If you do not intend to adjust the tilt for different viewing locations,
you can tighten the tilt tension knob K to prevent unwanted movement.
19
L
19
K
26
25
18
TV LATERAL SHIFT
REMOVING THE TV
HEAVY! You may need
assistance with this step.
HEAVY! You may need
assistance with this step.
1.
Remove the TV by reversing the procedure in STEP 3-2 on PAGE 15.
2.
Remove the arm assembly 19 by reversing the procedure in STEP 3-1
on PAGE 14.
3.
Reposition the arm assembly 19 (STEP 3-1 on PAGE 14).
4.
Reattach the TV (STEP 3-2 on PAGE 15).
1.
Remove the TV by reversing the procedure in
STEP 3-2 on PAGE 15.
2.
Remove the arm assembly 19 by reversing the
procedure in STEP 3-1 on PAGE 14.
19
19
ESPAÑOL
INSTRUCCIONES DE SEGURIDAD IMPORTANTES: CONSÉRVELAS Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO
Antes de comenzar, verifiquemos si este soporte es el adecuado para usted.
1
¿Su televisor pesa más de 54 kg (120 lb) incluyendo los accesorios?
No — ¡Perfecto!
54 kg
(120 lb) Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un
soporte compatible.
2
¿De qué está hecha su pared?
Tabiques de yeso con
montantes de madera
¡Perfecto!
3
?
Hormigón sólido o
bloques de cemento
¡Perfecto!
Llame al 1-800-359-5520 (Reino Unido: 0800-056-2853)
¿Tiene todas las herramientas necesarias?
5,5 mm
(7/32'')
Madera
4
¿No está seguro?
10 mm
(3/8'')
Hormigón
13 mm
(1/2'')
¿Listo para comenzar?
Lea estas instrucciones en su totalidad para sentirse seguro y cómodo con este fácil proceso de instalación. Consulte igualmente el manual del usuario
de su televisor para saber si existe algún requisito especial para instalar su televisor en la pared.
Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, del ensamblado o del uso del producto, póngase en contacto
con el servicio de atención al cliente al 1-800-359-5520 (Reino Unido: 0800-056-2853).
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
20
●
●
●
●
Este producto fue diseñado para su uso en paredes de montantes de madera, hormigón sólido y bloques de cemento - NO instalar en yeso solo
La pared debe soportar cinco veces el peso del televisor y del soporte juntos
No utilice este producto para ningún otro propósito que no sea el explícitamente especificado por el fabricante
El fabricante no se responsabiliza por ningún daño o lesión resultante del montaje incorrecto o del uso indebido
ESPAÑOL
Piezas y elementos de sujeción
Ver PÁGINA 4
ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje,
compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor.
Póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.
NOTA: No todos los elementos de sujeción incluidos deberán utilizarse.
PASO 1 Colocar la placa de sujeción en el televisor
Ver PÁGINA 7
1-1 Seleccione los tornillos del televisor
Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos (M4, M6 o M8) debe utilizar.
PRECAUCIÓN: Verifique que el tornillo o la combinación de tornillo y espaciador enrosquen correctamente.
Si el tornillo es demasiado corto, no sostendrá el televisor. Si es demasiado largo, el aparato se dañará.
1-2 Seleccione los espaciadores del televisor
Se incluyen espaciadores y tornillos para instalar el soporte de su televisor. Defina su preferencia para la configuración del espaciador cuando fije el soporte de
su televisor.
No use los espaciadores si el dorso de su televisor es plano Y quiere que su televisor esté más cerca de la pared.
Utilice los espaciadores 12 o 13 para acomodar: televisores con dorso redondeado o irregular, televisores con orificios de montaje intercalados y en caso de
necesitar un espacio adicional para cables.
1-3 Acople los espaciadores para las placas de sujeción del televisor
1.
2.
NOTA: Sautez cette étape si votre téléviseur est doté d’un dos plat et que vous voulez de votre téléviseur près du mur.
Presione las cuatro arandelas con reborde 11 a través de los orificios correspondientes de las placas de sujeción 01 que se alinean con el patrón de
orificios de su televisor.
Fije los cuatro espaciadores 12 o 13 que seleccionó en el PASO 1-2 a las arandelas con reborde 11 .
21
ESPAÑOL
1-4 Acople las placas de sujeción del televisor
1.
Centre el soporte del televisor 01 en el patrón de orificios como se indica en la ilustración, asegurándose de que los soportes estén nivelados. Haga la
instalación utilizando la combinación de espaciadores, tornillos y arandelas que seleccionó para su televisor.
NOTA: Utilice la arandela 09 para los tornillos 02 y 06 . Utilice la arandela 10 para los tornillos 03 , 04 , 05 , 07 y 08 .
NOTA: Se ilustran las configuraciones estándar. Si desea información sobre aplicaciones especiales o si tiene dudas sobre la selección de piezas, póngase en
contacto con el servicio de atención al cliente.
PASO 2A Fijar la placa mural a la pared Opción para montantes de madera
Ver PÁGINA 10
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
●
●
●
1.
2.
3.
4.
El yeso que recubre la pared no debe exceder los 16 mm (5/8'')
Tamaño mínimo del montante de madera: común 51 x 102 mm (2'' x 4") nominal 38 x 89 mm (1½'' x 3½")
Espacio horizontal mínimo entre los elementos de sujeción: 406 mm (16'')
Los montantes centrales deben verificarse: no todas las paredes tienen un espaciado convencional entre montantes de 406 mm (16"). Verifique el centro de
los montantes con un punzón o un clavo delgado o bien utilice un detector de bordes de montantes.
Nivele la plantilla de la placa mural 14 y marque la ubicación de los orificios.
NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com.
Haga los cuatro orificios guía con una mecha de 5,5 mm (7/32") de diámetro.
IMPORTANTE: Los orificios guía deben realizarse hasta una profundidad de 75 mm (3").
Instale las cuatro arandelas 17 y los tornillos tirafondo 18 . Ajuste los tornillos tirafondo 18 solamente hasta que las arandelas 17 queden firmes contra la
placa mural 15 .
PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos tirafondo 18 . NO ajuste en exceso los tornillos tirafondo.
Vaya al PASO 3 en la PÁGINA 14.
22
ESPAÑOL
PASO 2B Fijar la placa mural a la pared Opción para hormigón sólido o bloques de cemento
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales.
●
●
●
●
1.
Ver PÁGINA 12
Instale la placa mural 15 directamente sobre la superficie de hormigón
Espesor mínimo del hormigón: 203 mm (8'')
Tamaño mínimo del bloque de cemento: 203 x 203 x 406 mm (8'' x 8'' x 16'')
Espacio horizontal mínimo entre los elementos de sujeción: 406 mm (16'')
Coloque la plantilla de la plantilla de la placa mural 14 en la pared a la altura que desee. Nivele la placa mural y marque las ubicaciones de los cuatro orificios.
NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com.
2.
Haga los cuatro orificios guía con una mecha de 10 mm (3/8") de diámetro.
IMPORTANTE: Los orificios guía deben realizarse hasta una profundidad de 75 mm (3"). Nunca perfore el cemento que une los bloques.
3.
Inserte los cuatro anclajes para hormigón 16 .
PRECAUCIÓN: Cerciórese de que los anclajes 16 queden nivelados respecto de la superficie de hormigón.
4.
Instale las cuatro arandelas 17 y los tornillos tirafondo 18 . Ajuste los cuatro tornillos tirafondo 18 solamente hasta que las arandelas 17 queden firmes
contra la placa mural 15 .
PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos tirafondo 18 . NO ajuste en exceso los tornillos tirafondo.
PASO 3 Acoplar el televisor a la placa mural
Ver PÁGINA 14
3-1 Fije el módulo del brazo a la placa mural
NOTA: El módulo del brazo 19 puede ajustarse horizontalmente a fin de personalizar la instalación del televisor.
1.
Alinee los orificios superiores e inferiores el módulo del brazo 19 con las ranuras de la placa mural 15 .
2.
Fije parte superior del conjunto el módulo del brazo 19 a la placa mural 15 utilizando los cuatro tornillos suministrados 21 . Ajústelos con la llave
hexagonal 26 .
3.
Fije parte inferior del conjunto el módulo del brazo 19 a la placa mural 15 utilizando los cuatro tornillos suministrados 21 . Ajústelos con la llave
hexagonal 26 .
23
ESPAÑOL
3-2 Cuelgue el televisor en el módulo del brazo
¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso.
1.
Asegúrese de enganchar los soportes del televisor en la placa de conexión, como se muestra en la ilustración.
2.
Fije las tapas 20 a la placa de conexión 01 utilizando los tornillos 22 . Ajústelos con la llave hexagonal 25 .
PRECAUCIÓN: Evite el riesgo de lesiones y daños materiales. Los tornillos
22 debe instalarse para fijar el televisor al ensamblaje del brazo 19 .
3-3 Aplicar protectores de fieltro
Coloque almohadillas de fieltro autoadhesivas 23 en el conjunto el módulo del brazo 19 para proteger su pared.
3-4 Acople cubiertas de la placa de pared
Coloque las cubiertas de la placa mural 24 .
Organizar los cables
24
1.
Pase los cables del televisor por los canales ubicados en las secciones media e inferior el módulo del brazo 19 .
2.
Coloque las cubiertas para cables 27 , 28 y 29 en el módulo del brazo 19 . Fíjelas con los tornillos suministrados 30 .
3.
Pase los sujetacables 31 por el soporte para sujetacables T .
Ver PÁGINA 17
ESPAÑOL
Ajustes
Ver PÁGINA 18
NIVEL
Afloje el tornillo de nivel L utilizando la llave hexagonal 26 , ajuste su televisor y vuelva a ajustar el tornillo de nivel L .
INCLINACIÓN
El televisor debe acomodarse fácilmente al moverlo y, posteriormente, quedar en su lugar. Si el televisor se inclina hacia arriba o hacia abajo de forma natural,
ajuste la perilla de tensión de inclinación K a mano.
NOTA: Si no pretende ajustar la inclinación a diferentes ubicaciones de visión, puede ajustar la perilla de tensión de inclinación K para evitar movimientos no
deseados.
DESPLAZAMIENTO LATERAL DEL TELEVISOR
¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso.
1.
Para retirar el televisor: (revierta los procedimientos en el PASO 3-2 en la PÁGINA 15).
2.
Para retirar el módulo del brazo 19 : (revierta los procedimientos en el PASO 3-1 en la PÁGINA 14).
3.
Vuelva a colocar el módulo del brazo 19 (PASO 3-1 en la PÁGINA 14).
4.
Vuelva a colocar el televisor (PASO 3-2 en la PÁGINA 15).
EXTRACCIÓN DEL TELEVISOR
¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso.
1.
Para retirar el televisor: (revierta los procedimientos en el PASO 3-2 en la PÁGINA 15).
2.
Para retirar el módulo del brazo 19 : (revierta los procedimientos en el PASO 3-1 en la PÁGINA 14).
25
26
27
Thank you for choosing Sanus! Please take a moment to let us know how we did:
Call us: 1-800-359-5520
UK: 0800 056 2853
Email us: [email protected]
Like us on Facebook.com /sanussystems
Leave a review: sanus.com
Follow us on Twitter: @ sanussystems
Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However,
Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in
connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy,
completeness or sufficiency of the information contained in this document.
©2014 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA
6901-002344 00

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement