UHD Monitor
User Manual
U32D970
The color and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
BN46-00430A-01
Table of contents
Before Using the Product
Rotating the monitor
23
Caution23
Copyright5
Securing the Installation Space
Precautions for storage
6
6
Safety Precautions
6
Symbols6
Cleaning7
Electricity and Safety
7
Installation8
Operation10
Correct posture to use the product
12
Preparations
Checking the Components
13
Components13
Parts14
Front Buttons
14
Reverse Side
16
Installation17
Installing a Wall-mount Kit or Desktop Stand 18
Adjusting the Product Tilt and Height
20
Rotating the Monitor Screen
20
Anti-theft Lock
21
MagicRotation Auto
22
Software Installation
22
Caution22
Using NCE(Natural Color Expert)
What is Monitor Calibration?
Supported calibrators
24
24
What is NCE (Natural Color Expert)?
NCE Program Installation/Uninstallation
25
25
Starting NCE (Natural Color Expert)
Connecting the Calibrator
26
26
Features of the NCE Program
Layout and Menu Items on the NCE
Home Screen
Layout and Menu Items on the
Uniformity Screen
Overview and Functions of the
Verification Screen
Starting Calibration
27
27
28
28
29
Connection Using the HDMI Cable
Connection Using the DP Cable
Connecting to Headphones or Speakers
Connecting the Power
Tidying Up the Connected Cables
35
35
36
36
37
Connecting the Product to a PC as a
USB HUB
Connecting a PC to the Product
Utilizing the Product as a USB HUB
38
38
39
Driver Installation
40
Setting Optimum Resolution
40
Screen Setup
Color Mode41
Configuring Color Mode (with a PC connected) 41
Configuring Color Mode (with AV connected) 42
Brightness43
Configuring Brightness43
Contrast44
Configuring Contrast44
Connecting and Using a Source
Device
Sharpness45
Configuring Sharpness45
Before Connecting
Pre-connection Checkpoints
34
34
Connecting and Using a PC
Connection using a Dual-link DVI cable
34
34
Color46
Configuring Color46
Dual Color Mode47
Configuring Dual Color Mode47
2
Table of contents
Response Time48
Configuring the Response Time48
View Calibration Values49
Viewing calibration settings
49
HDMI Black Level50
Configuring the HDMI Black Level Settings
50
Reset Color Mode51
Configuring Reset Color Mode51
Screen Adjustment
Image Size52
Changing the Image Size52
H-Position & V-Position54
Configuring H-Position & V-Position54
PIP/PBP55
Configuring PIP/PBP Mode56
Configuring Size57
Configuring Position58
Configuring Sound Source59
Configuring Source61
Configuring Image Size64
Configuring Contrast&Color66
Coordinating OSD
Information Menu and Others
Language68
Configuring Language68
Information79
Displaying Information79
Display Time69
Configuring Display Time69
Configuring Brightness and Contrast in the
Initial Screen
80
Configuring Volume in the Initial Screen
80
Setup and Reset
Eco Saving70
Configuring Eco Saving70
USB Super Charging71
Configuring USB Super Charging71
Installing the Software
Easy Setting Box
Installing the Software
Removing the Software
81
81
81
PC/AV Mode72
Configuring PC/AV Mode72
DisplayPort Ver.73
Configuring DisplayPort Ver.73
Source Detection74
Configuring Source Detection74
Key Repeat Time75
Configuring Key Repeat Time75
Off Timer76
Configuring Off Timer76
Configuring Turn Off After77
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Center
Testing the Product
Checking the Resolution and Frequency
Check the following.
82
82
82
83
Q & A
86
Reset All78
Initializing Settings (Reset All)78
3
Table of contents
Specifications
General88
PowerSaver90
Standard Signal Mode Table
91
Appendix
Contact SAMSUNG WORLD WIDE
93
Responsibility for the Pay Service(Cost to
Customers)102
Not a product defect
102
A Product damage caused by customer's fault 102
Others102
Correct Disposal
Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
103
103
Terminology104
4
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
ⓒ 2014 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
-- (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
-- (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
5
Securing the Installation Space
Safety Precautions
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and
damage the product. Be sure to allow the amount of space as shown below or greater when installing
the product.
――The exterior may differ depending on the product.
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
10 cm
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
10 cm
10 cm
This symbol indicates that high voltage is present inside.
10 cm
It is dangerous to make any kind of contact with any internal part of this product.
10 cm
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product
(Service fee will be charged.)
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
6
Cleaning
Electricity and Safety
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
――Hold the power cable by the plug and do not touch the cable with
Do not use multiple products with a single power socket.
wet hands. Otherwise, an electric shock may result.
3
•• Overheated power sockets may cause a fire.
Wipe the monitor with a clean, soft and dry cloth.
•• Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
!
•• Do not spray water or detergent directly on the
product.
Insert the power plug all the way in so it is not loose.
4
•• An unsecure connection may cause a fire.
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
!
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
•• An electric shock or injury may result.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
!
7
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
•• Damage to the cord may result in a fire or electric shock.
!
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Installation
Warning
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
•• A fire may result.
!
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
Caution
•• An increased internal temperature may cause a fire.
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Install the product at least 10cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•• A fire or electric shock may result.
!
Keep the plastic packaging out of the reach of children.
!
•• Children may suffocate.
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product
when an issue occurs.
!
!
8
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
Caution
•• The product may fall and become damaged and/or cause an injury.
Do not drop the product while moving.
•• Using the product in an area with excess vibration may damage the
product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•• Product failure or personal injury may result.
!
Do not set down the product on its front.
•• A fire or electric shock may result.
•• The screen may become damaged.
!
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• The product lifespan may be reduced or a fire may result.
•• The product may fall and become damaged and/or cause an injury.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
Set down the product gently.
•• Product failure or personal injury may result.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an
extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Center if you want to
install the product at such a place.
9
Operation
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•• The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
During a lightning or thunderstorm, power off the product and remove the
power cable.
•• A fire or electric shock may result.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Center for repairs.
!
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
•• Damage to the cord may result in a fire or electric shock.
!
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Center.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•• Children may become injured or seriously harmed.
•• Sparks can cause an explosion or fire.
!
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Center.
•• Continued use can result in a fire or electric shock.
GAS
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
10
Do not use or keep combustible spray or an inflammable substance near
the product.
Caution
•• An explosion or fire may result.
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
!
•• An increased internal temperature may cause a fire.
-_100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•• Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•• The product may fall and become damaged or cause an injury.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
!
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
11
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•• Eye fatigue will be relieved.
Correct posture to use the product
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
Store small accessories out of the reach of children.
Use the product in the correct posture as follows:
!
Exercise caution when adjusting the product angle or stand height.
•• Your hand or finger may get stuck and injured.
!
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
•• Product failure or personal injury may result.
•• Straighten your back.
•• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at
the screen. Keep your eyes directly in front of the screen.
•• Adjust the angle so light does not reflect on the screen.
•• Keep your forearms perpendicular to your upper arms and level with the back of your hands.
•• Keep your elbows at about a right angle.
•• Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your
heels attached to the floor, and your arms lower than your heart.
When using headphones or earphones, do not turn the volume too high.
•• Having the sound too loud may damage your hearing.
12
Chapter 02
Preparations
Checking the Components
-- Contact the vendor where you
purchased the product if any
components are missing.
Components
――Components may vary depending on the country.
-- The appearance of the components and
items sold separately may differ from the
image shown.
-- Recommend to use the HDMI cable
and DP cable which is provided by the
supplier.
Quick Setup Guide
Regulatory guide
Natural Color Expert Data Sheet
(Not available in some locations)
-- The optimal resolution may not be
available when using a non-high speed
HDMI or HDMI-DVI cable.
-- To display the screen using a supported
resolution, use the cables that came with
the product. You can also use DP or HDMI
cables that support UHD.
Warranty card
User manual
DP cable (P.35)
Mini DP to DP gender (Optional)
HDMI cable (P.35)
USB 3.0 cable (P.38)
Power cable (P.36)
Wall-mount bracket
Cleaning cloth (Optional)
-- The Mini DP to DP gender changer may
not be provided, depending on the
model.
13
Parts
Icons
Description
Open or close the onscreen display (OSD) menu, or return to the parent menu.
When the initial screen is displayed, press any button on the front of the product to display
to display the on-screen
the Function Key Guide. With the Guide displayed, press
display menu.
Front Buttons
――The color and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
When the Function Key Guide is displayed, press
to set the Volume.
――The Volume can be adjusted if the input source is DisplayPort1, DisplayPort2 or
HDMI.
Move to the upper or lower menu or adjust the value for an option on the OSD menu.
When the Function Key Guide is displayed, press
Contrast.
to adjust the Brightness and
Confirm a menu selection.
Pressing the
button when the OSD menu is not displayed will change the input
source (DVI, HDMI, DisplayPort1, DisplayPort2).
When PIP/PBP is set to On and the Function Key Guide is displayed, press
the Source for PIP/PBP.
――If you power on the product or change the input source by pressing the
to set
button,
a message that shows the changed input source will appear at the top left corner of
the screen.
Function Key Guide
When the Function Key Guide is displayed, press to configure Color Mode settings.
――For details on how to configure Color Mode settings, refer to "Color Mode(P.41)".
When the Function Key Guide is displayed, press
to configure PIP/PBP settings.
――For details on how to configure PIP/PBP settings, refer to "PIP/PBP(P.55)".
14
Icons
Description
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
――For details on the power-saving function, refer to “PowerSaver(P.90)” in the product
specifications.
――To reduce power consumption, it is best to remove the power cable when not using
the product for an extended period of time.
When a control button on the product is pressed, the Function Key Guide will be displayed
before the onscreen menu opens.
(The guide shows the function of the button pressed.)
Function Key Guide
To access the onscreen menu when the guide is displayed, press the corresponding
button again.
The Function Key Guide may vary depending on the function or product model.
Refer to the actual product.
15
Reverse Side
――The color and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
――To maximize the picture quality, a graphics card that supports the UHD
Port
Description
Connect the power cord for your monitor to the POWER IN port on the back of the
product.
(3840x2160) resolution is recommended.
Connects to a source device via a DVI cable.
――UHD resolution (3840x2160 @ 30Hz) is available if a dual-link DVI cable is connected.
Connects to a source device using an HDMI cable or HDMI-DVI cable.
――When an HDMI cable is connected, the product can display UHD resolution
(3840x2160 @ 30Hz).
――The product does not support UHD resolution when an HDMI-DVI cable is connected.
Connects to a PC using a DP cable.
――When a DP cable is connected, the product can display UHD resolution
(3840x2160 @ 60Hz).
Connect to an audio output device such as headphones.
ON
Connects to a PC using a USB cable.
――This port can only connect to a PC.
Connect to a USB device. Compatible with a USB cable version 3.0 or lower.
――Source devices can be charged using these USB ports.
――To use the USB Super Charging feature, go to Settings
USB Super Charging and
set the USB port that will be used for fast charging to On.
The USB data transfer feature is not available when the USB Super Charging feature is
set to On.
――High-speed charging is possible using the
and
ports only. These ports
charge devices faster than typical USB ports. The speed depends on the connected
devices.
16
Installation
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Caution
Take extra care to ensure your hand does not get stuck in the rotating area or the height adjustment area. This could injure your hand.
Do not put the hand below the stand body.
Do not hold the product upside down only by the stand.
17
Installing a Wall-mount Kit or Desktop Stand
――The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Before Installation
――Power the product off and remove the power cable from the power socket.
Place a protective cloth or cushion on a flat surface.
Next, place the product with the face down on top of
the cloth or cushion.
Unfasten the screw from the back of the product.
Lift and detach the rear cover of the product in the
arrow direction.
Lift and detach the stand.
Detach the cover from the back of the product in the
direction indicated by the arrows.
18
Installing a Wall-mount Kit or Desktop Stand
1
2
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
――Using a screw longer than the standard length can damage the internal components of the product.
――The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
――Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or
attaching the wall-mount kit or desktop stand using excessive force.
――Samsung shall not be held liable for any product damage or personal injury caused by using a
3
4
wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your
own.
――To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10 cm or
farther away from the wall.
――Be sure to use a wall-mount kit that complies with the standards.
――To install the product on a wall using the wall-mount kit, remove the stand.
- Attach the wall-mount kit or desktop stand here
- Wall-mount bracket
19
Adjusting the Product Tilt and Height
Rotating the Monitor Screen
――The color and shape of parts may differ from what is shown. Specifications are subject to change
You can rotate your monitor as shown below.
without notice to improve quality.
1
2
3
4
5
6
-1.5˚(-1.5˚,+1.5˚) ~ 91.5˚(-1.5˚,+1.5˚)
-30˚(+0,-2˚) ~ 30˚(+2˚,0)
-5˚(±2.0˚) ~ 20˚(±2.0˚)
130 mm ± 2.0 mm
――Adjust the screen following the arrow direction.
――Rotate the screen in clockwise direction till it becomes completely vertical to the desktop.
――Rotating the screen counterclockwise can damage the product. Rotating the screen when the
product is upright or when the height is not at the maximum can also damage the product.
•• The monitor tilt and height can be adjusted.
•• To avoid damage to the product when adjusting the tilt, push or pull the top area of the product at
the center while holding the top of the stand.
20
Anti-theft Lock
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-- An anti-theft locking device can be purchased separately.
-- Refer to the user guide provided with your anti-theft locking device for details.
-- Anti-theft locking devices can be purchased at electronics retailers or online.
21
MagicRotation Auto
The MagicRotation Auto function detects the rotation of monitors that are fitted with a rotation sensor
and rotates the Windows screen accordingly.
4
Fourteen languages are available as installation languages.
5
If the orientation is set to a mode other than "Landscape" in the screen resolution menu on
Windows 7, the "MagicRotation Auto" function may not work properly.
Software Installation
1
Insert the user manual CD provided with the product into the CD-ROM drive.
2
Follow the instructions given on the screen to proceed with installation.
6
reconfiguration process may be displayed or screen burn-in may appear, depending on the
graphics card. This is performed by the Windows operating system and has nothing to do with the
product.
――After installation, the application menu language will be displayed in the language of the operating
system. (This complies with the basic policies of Windows.)
The OSD menu will be displayed if the monitor is rotated. When the monitor is rotated, the screen
7
If you do not want the screen to rotate automatically when the monitor is rotated, press the
Caution
Windows and L keys at the same time to lock the Windows operating system. If the operating
1
the product.
Compatible only with Windows 7 (32 bit or 64 bit) and Windows 8 (32 bit or 64 bit),
system cannot be locked, it is due to the constraints of Windows API and has nothing to do with
Windows 8.1 (32 bit or 64 bit).
2
Compatible with a graphics card that complies with the DDC/CI and MS API standards
With a graphics card that does not comply with the aforementioned standards, the MagicRotation
Auto function may not be available.
3
To maximize the performance of the function, update the graphics card driver to the latest version.
22
Rotating the monitor
Caution
When rotating the monitor, the rotation angle is displayed on the monitor screen.
1
be rotated. The OSD can still rotate by 90° and display properly.
2
0°
If the MagicRotation Auto software is not installed on the monitor, contents on the screen cannot
Once rotated, the OSD may appear in a different view mode from the mode before it was rotated.
90°
The on-screen display (OSD) menu items will automatically rotate when the screen rotates.
MENU
MENU
SOURCE
PIP/PBP
SOURCE
PIP/PBP
23
Chapter 03
Using NCE(Natural Color Expert)
Configure the screen settings such as brightness and color tone.
What is Monitor Calibration?
Most of digital images are managed onscreen. That is why a monitor is very important for photographers and designers.
The process to calibrate a monitor in order to display proper colors is called monitor calibration.
This product went through a calibration process using color measurement equipment in the factory before shipment.
To obtain the optimum picture quality after calibration, select Custom or Calibration 1, Calibration 2, Calibration 3 mode on the monitor.
Supported calibrators
I1 Pro
i1Display Pro
ColorMunki Design
ColorMunki Photo
CA-210 / CA-310
Spyder 4
Manufacturer
xrite
xrite
xrite
KONICA MINOLTA
datacolor
Supported operating systems
(Windows)
Windows Vista 32 & 64
Windows Vista 32 & 64
Windows Vista 32 & 64
Windows Vista 32 & 64
Windows Vista 32 & 64
Windows 7 32 & 64
Windows 7 32 & 64
Windows 7 32 & 64
Windows 7 32 & 64
Windows 7 32 & 64
Windows 8 32 & 64
Windows 8 32 & 64
Windows 8 32 & 64
Windows 8 32 & 64
Windows 8 32 & 64
Windows 8.1 32 & 64
Windows 8.1 32 & 64
Windows 8.1 32 & 64
Windows 8.1 32 & 64
Windows 8.1 32 & 64
Mac OS X 10.6 Snow Leopard
Mac OS X 10.6 Snow Leopard
Mac OS X 10.6 Snow Leopard
Mac OS X 10.6 Snow Leopard
Mac OS X 10.7 Lion
Mac OS X 10.7 Lion
Mac OS X 10.7 Lion
Mac OS X 10.7 Lion
Mac OS X 10.8 Mountain Lion
Mac OS X 10.8 Mountain Lion
Mac OS X 10.8 Mountain Lion
Mac OS X 10.8 Mountain Lion
Mac OS X 10.9 Mavericks
Mac OS X 10.9 Mavericks
Mac OS X 10.9 Mavericks
Mac OS X 10.9 Mavericks
Supported operating systems
(Mac)
24
What is NCE (Natural Color Expert)?
The Natural Color Expert (hereinafter "NCE") program was developed by
Samsung Electronics to display optimized colors customized by users.
――This product supports the monitor calibration feature through the internal
NCE function and the provided NCE program. (a calibrator can be purchased
separately).
――The default calibration settings measured at the factory can be restored after
the product is calibrated using the NCE software.
――Note that the default calibration settings measured at the factory may vary
depending on the panel characteristics. Panel characteristics can change
according to operating time.
NCE Program Installation/Uninstallation
Installation
1
Insert the installation CD into the CD-ROM drive.
2
Click the Natural Color Expert V4 installation program.
――If the software installation screen does not pop up on the main screen, go to CD-ROM
AutoPlay
Manual
NCE
folder. Next, install using the Natural Color Expert v4 execution file.
3
If the Natural Color Expert V4 InstallShield Wizard screen appears, click Next and Install in sequence.
4
Installation progress will be displayed.
5
Click Finish in the displayed InstallShield Wizard Complete screen.
6
The Natural Color Expert V4 shortcut icon will be created on the desktop after installation.
――The Natural Color Expert V4 execution icon may not be displayed depending on the PC system or product specifications.
――Press the F5 key (Refresh) if the execution icon does not appear.
Uninstallation
1
Go to Settings
2
Select Natural Color Expert V4 from the list and click Change/Remove.
Control Panel on the Start menu and double-click Add or Remove Programs.
――Natural Color Expert V4 installation can be affected by the graphics card, mother board and network conditions.
25
Starting NCE (Natural Color Expert)
Connecting the Calibrator
1
Connect the PC IN port on the product to a USB port on the PC using the USB cable.
2
Connect the calibrator to a USB port on the product.
――Install the driver (which is usually provided with a calibration program) provided by the calibrator manufacturer first before connecting the calibrator.
3
The connected calibrator will automatically appear in the Select a Calibrator screen.
――If more than one calibrator is connected, select the desired calibrator in the Select a Calibrator screen. Next, click Next.
26
Features of the NCE Program
1
Select a tab to perform the desired functions.
2
If the Profile List does not contain a profile, select Default and then start calibration.
If the Profile List contains profiles, select a profile to edit or calibrate the profile.
Layout and Menu Items on the NCE Home Screen
Select Profile List to view information on each profile. Select the Start button to perform calibration.
1
3
Select a profile to preview the screen. Ensure the Profile List contains profiles.
4
Select More to edit a profile as follows.
5
3
•• Rename: Change a profile name.
4
•• Delete: Delete the selected profile.
•• Delete All: Delete all profiles on the list of profiles.
•• Export: Save the selected profile to another path.
•• Import: Import a profile from another path.
5
Configure the system settings.
2
27
Layout and Menu Items on the Uniformity Screen
Overview and Functions of the Verification Screen
Perform calibration for Uniformity to optimize the display uniformity of the monitor.
This screen allows you to verify the difference between the current monitor picture quality and the
target value. (for calibration mode only)
1
1
2
2
3
1
2
Specify the number of blocks displayed per screen during Uniformity calibration.
A greater number of blocks will increase the precision of uniformity calibration.
1
Perform color verification for the currently displayed screen compared with profiles (for
calibration mode only).
Select Luminance only to perform calibration only for the brightness. Select Luminance
and Color to perform calibration for both the brightness and colors.
2
Perform Uniformity verification for the currently displayed screen (for calibration mode
only).
If both Luminance and Color are enabled, the color temperature uniformity will also
increase after calibration.
3
Specify the color temperature when performing calibration. To obtain a more accurate color
temperature, it is recommended to perform Uniformity calibration before color calibration.
28
Starting Calibration
2
Specify the color gamut.
3
Configure the Brightness. The brightness level after calibration may depend on the color
If the Profile List does not contain a profile, select Default and then start calibration.
If the Profile List contains profiles, select a profile to edit or calibrate the profile.
Go to “Home screen – System settings – Profile Mode.”
Basic mode
1
Select Default or a profile from the Profile List. Next, select the Start button.
temperature.
29
4
Configure the Black Level setting. If you do not adjust the black level setting by moving the slider
button, the minimum brightness will automatically be applied.
6
Configure the R/G/B Gamma settings. If you configure LUT, the gamma curve of sRGB will be
applied.
•• If Linear Gray is selected, DeltaE (color difference) for the gray scale changes to less than 1 after
calibration.
•• If Deep Black is selected, the black luminance becomes darker than Linear Gray after calibration.
The minimum brightness varies depending on the “Black Level” settings.
5
Configure the color temperature for White Point (range: 4000K – 10000K). To select a standard
brightness, click the Standard button.
30
7
Start calibration.
•• Select the connected calibrator, then click Next.
•• Attach the calibrator to the indicated spot on the screen, then click Next.
――Set the screensaver time to at least 30 minutes before starting measurement.
――The calibration process will be performed in full screen. To cancel a calibration that is in progress,
8
After calibration, you can compare the screens before and after the calibration using the After /
Before buttons.
Click Save to save the calibration results to Calibration on the monitor.
press the ESC key.
31
Advanced
1
Settings required to calibrate can be configured from a single page.
2
Start calibration.
•• Select the connected calibrator, then click Next.
•• Attach the calibrator to the indicated spot on the screen, then click Next.
――Set the screensaver time to at least 30 minutes before starting measurement.
――The calibration process will be performed in full screen. To cancel a calibration that is in progress,
press the ESC key.
32
3
After calibration, you can compare the screens before and after the calibration using the After /
Before buttons.
Click Save to save the calibration results to Calibration on the monitor.
33
Chapter 04
Connecting and Using a Source Device
Before Connecting
Connecting and Using a PC
Check the following before you connect this product with other devices.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
――Do not connect the power cable until all connections are completed.
Connection using a Dual-link DVI cable
――Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
Connecting the power cable during connection may damage the product.
――Check the types of ports at the back of the product you want to connect.
――To maximize the picture quality, a graphics card that supports the UHD
(3840x2160) resolution is recommended.
DVI IN
1
Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on the PC.
2
Press
to change the input source to DVI.
――Audio is not available if the PC and product are connected via the DVI port.
――UHD resolution (3840x2160 @ 30Hz) is available if a dual-link DVI cable is connected.
34
Connection Using the HDMI Cable
Connection Using the DP Cable
――Do not connect the power cable before connecting all other cables.
――Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
DP IN 1, DP IN 2
HDMI IN
1
Ensure you connect a source device first before connecting the power cable.
Connect the HDMI cable to the HDMI IN port on the back of the product and the HDMI port on
1
the PC.
the PC.
2
Press
2
to change the input source to HDMI.
――If audio is supported, the Volume can be adjusted using the
buttons on the front of the product.
――The DVI-HDMI cable can be connected to an HDMI port only.
Connect the DP cable to the DP IN 1, DP IN 2 port on the back of the product and the DP port on
Press
to change the input source to DisplayPort1, DisplayPort2.
――If audio is supported, the Volume can be adjusted using the
buttons on the front of the product.
――Connections with an HDMI or DVI cable are not supported.
――Use of the maximum resolution may not be possible and the picture quality may degrade, depending
on the cable type.
――The product does not support UHD resolution when an HDMI-DVI cable is connected.
35
Connecting to Headphones or Speakers
Connecting the Power
――Do not connect the power cable before connecting all other cables.
――Connecting parts may differ in different products.
Ensure you connect a source device first before connecting the power cable.
The exterior may differ depending on the product.
To use the product, connect the power cable to a power outlet and the POWER IN port on the product.
AUDIO OUT
POWER IN
ON
――The input voltage is switched automatically.
1
Connect an audio output device such as headphones or speakers to AUDIO OUT on the product.
――If the stereo cable is connected, the Volume can be adjusted using the
buttons on the front of the
product.
36
Tidying Up the Connected Cables
Remove the COVER-CABLE by sliding it down with both hands
in the direction indicated by the arrow.
Hold the bottom of the stand neck securely with your left
hand and use the thumb of your right hand to slide up the
COVER-CABLE to fix it in place.
Insert and fix the cables in the slot.
Installation is finished.
Hold the COVER-CABLE and fix the cables into the grooves on
the STAND-REAR.
37
Connecting the Product to a PC as a USB HUB
Connecting a PC to the Product
――The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the
product, without having to connect the device to the PC.
To use the product as a USB hub, connect the product to a PC using a USB cable.
Connect the USB cable to on the back of the product and USB
on the PC.
――A USB 2.0 cable can be used to connect the product to a PC. However, to take full advantage of the USB 3.0 function, connect a USB 3.0 cable between the PC and the
product. Ensure the PC supports USB 3.0.
38
Utilizing the Product as a USB HUB
Using the product as a hub, connect and use various source devices with the product at the same time.
A PC cannot connect to multiple source devices at the same time as it has a limited number of input/output ports available. The HUB feature on the product will improve
your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC.
If multiple source devices are connected to the PC, the many cables around the PC may look messy. Connecting the devices directly to the product will resolve such
inconvenience.
Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC. This allows you to control the device from the PC or charge the
device battery.
――To detect and start a source device faster, connect the device to the USB 3.0 port on the product.
――An external mass-storage HDD requires an external power supply. Be sure to connect it to a power source.
――High-speed charging is possible using the
and
ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected
devices.
――Battery charging is possible in power-saving mode. However, it is not possible when the product is powered off.
――To charge a battery, make sure that the USB upstream port on the product is connected to a PC via a USB cable.
――Battery charging is not possible if the power cable is disconnected from the power socket.
――Mobile devices should be purchased separately.
39
Driver Installation
Setting Optimum Resolution
――You can set the optimum resolution and frequency for this product by installing the corresponding
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
drivers.
――An installation driver is contained on the CD supplied with the product.
Select a language on the product and change the resolution on your PC to the optimum setting.
――If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download
the file.
1
Insert the user manual CD provided with the product into the CD-ROM drive.
2
Click "Windows Driver".
3
Follow the instructions given on the screen to proceed with installation.
4
Select your product model from the list of models.
Setup Guide
The optimal resolution for this monitor is as follows:
****x**** **Hz
Follow the above settings to set the resolution.
Language
[
English
]
OK
1
Press
2
To hide the information message, press
to move to the language you want and press
or
.
.
――If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
――The optimum resolution can also be selected in Control Panel on your PC.
5
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
40
Chapter 05
Screen Setup
Configure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.
Color Mode
Configuring Color Mode (with a PC connected)
1
Select a color mode (Color Mode) suitable for the environment where the
product will be used.
Calibration 1 / Calibration 2 / Calibration 3 calibrate the screen using the
settings configured from the Natural Color Expert program.
Picture
Color Mode
Custom
100
Brightness
Contrast
75
Sharpness
60
Color
▶
Dual Color Mode
▶
Response Time
Choose a color mode
that best suits your
viewing environment.
The calibration image
will be displayed using
optimized colors from
the Natural Color Expert
program.
Faster
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Color Mode and press
on the product.
on the product.
•• Custom: Customize the screen settings.
•• High-brightness: Make the screen look brighter than sRGB mode.
•• sRGB: Adjust the color system to sRGB mode. This is the standard mode of this monitor.
•• Adobe RGB: Adjust the color system to Adobe RGB mode. This mode is optimized for printing purposes.
•• SMPTE-C: Adjust the color system to SMPTE-C mode. This mode is ideal to view TV NTSC content.
•• BT.709: Adjust the color system to BT.709 mode. This mode is ideal to view HDTV content.
•• EBU: Adjust the color system to EBU mode. This mode is ideal to view TV PAL content.
•• DCI: Adjust the color system to DCI mode. This mode is ideal to view movies.
•• DICOM: Adjust the color system to DICOM mode. This mode is ideal to view medical images.
Custom
High-brightness
sRGB
Color Mode
Adobe RGB
-- The displayed image may differ depending on the model.
•• Calibration 1 / Calibration 2 / Calibration 3: This mode analyzes the color characteristics of your monitor and allows
you to save color information of the monitor as an ICC profile. This will tell your monitor what color space it should use
and how it should interpret and display colors. Optimized color from the Natural Color Expert program and
Calibration 1 / Calibration 2 / Calibration 3 will be displayed on the screen.
――If you set Color Mode to Calibration 1 / Calibration 2 / Calibration 3, it is not possible to change the Brightness,
Contrast, Sharpness and Color settings.
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
41
Dynamic
Standard
Movie
Color Mode
Custom
Configuring Color Mode (with AV connected)
――When the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV, Color Mode has four automatic
picture settings(Dynamic, Standard, Movie, Custom)that are preset at the factory.
――You can activate either Dynamic, Standard, Movie, Custom. You can select Custom which automatically recalls your
personalized picture settings.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Color Mode and press
on the product.
on the product.
•• Dynamic: Select this mode to view a sharper image than in Standard mode.
•• Standard: Select this mode when the surroundings are bright. This also provides a sharp image.
•• Movie: Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
•• Custom: Select this mode when you want to adjust the image according to your preferences.
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
42
Brightness
Configuring Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
――This menu is not available when Eco Saving is set .
Picture
Color Mode
Custom
100
Brightness
Contrast
75
Sharpness
60
Color
▶
Dual Color Mode
▶
Response Time
Adjust the brightness
level. Values closer to
100 mean a brighter
screen.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Brightness and press
4
Adjust the Brightness using the
5
The selected option will be applied.
on the product.
on the product.
buttons.
Faster
-- The displayed image may differ depending on the model.
43
Contrast
Configuring Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
――This menu is not available when PIP/PBP Mode is set to On and the Size is set
to
/
(PBP Mode).
Picture
Color Mode
Custom
100
Brightness
Contrast
75
Sharpness
60
Color
▶
Dual Color Mode
▶
Response Time
Adjust the contrast level.
Values closer to 100
mean a bigger light/
dark contrast.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Contrast and press
4
Adjust the Contrast using the
5
The selected option will be applied.
on the product.
on the product.
buttons.
Faster
-- The displayed image may differ depending on the model.
44
Sharpness
Configuring Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
――Not available when PIP/PBP Mode is set to On.
Picture
Color Mode
Custom
100
Brightness
Contrast
75
Sharpness
60
Color
▶
Dual Color Mode
▶
Response Time
Adjust the sharpness of
the picture. Values closer
to 100 mean a sharper
image.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Sharpness and press
4
Adjust the Sharpness using the
5
The selected option will be applied.
on the product.
on the product.
buttons.
Faster
-- The displayed image may differ depending on the model.
45
Color
Configuring Color
A detailed description of each function is provided. Refer to your product for
details.
――Not available when PIP/PBP Mode is set to On.
――When Color Mode is set to High-brightness, it is not possible to change the
Color Temp. and Gamma settings.
――When Color Mode is set to DICOM, it is not possible to change the Gamma
settings.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Color and press
on the product.
on the product.
•• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
•• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
Picture
Color Mode
Configure color settings.
Custom
Brightness
•• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
――When Color Mode is set to sRGB, Adobe RGB, SMPTE-C, BT.709, EBU, DCI or DICOM, it is not possible to change the
Red, Green and Blue settings.
100
Contrast
75
•• Gamma: Adjust the middle level of luminance. (Range: Optimum ~ 2.6)
Sharpness
60
•• Color Temp.: Adjust the color temperature (red/green/blue). (Range: Optimum ~ 10000K)
Color
▶
Dual Color Mode
▶
Response Time
Faster
Color
Red
50
Green
50
Blue
50
Gamma
Optimum
Color Temp.
Optimum
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
Adjust the red saturation
level. Values closer
to 100 mean greater
intensity for the color.
-- The displayed image may differ depending on the model.
46
Dual Color Mode
Configuring Dual Color Mode
Split the screen into two to assign different settings to each of the divided screens.
Picture
Color Mode
Custom
100
Brightness
Contrast
75
Sharpness
60
Color
▶
Dual Color Mode
▶
Response Time
Split the screen and
enable a different color
setting in each half.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Dual Color Mode and press
on the product.
on the product.
•• Dual Color Mode: Off / On
•• Color Mode: Custom / High-brightness / sRGB / Adobe RGB / SMPTE-C / BT.709 / EBU / DCI / DICOM /
Calibration 1 / Calibration 2 / Calibration 3
――This feature is the same as Color Mode found on page(P.41).
Faster
•• Contrast: Set the contrast for the divided screens.
•• Sharpness: Set the sharpness for the divided screens.
Dual Color Mode
Dual Color Mode
Color Mode
Off
Custom
Split the screen and
enable a different color
setting in each half.
•• Red: Set the intensity of red in the divided screens.
•• Green: Set the intensity of green in the divided screens.
•• Blue: Set the intensity of blue in the divided screens.
Contrast
75
•• Gamma: Set the gamma in the divided screens.
Sharpness
60
•• Color Temp.: Set the color temperature in the divided screens.
Red
50
Green
50
Blue
50
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
-- The displayed image may differ depending on the model.
47
Response Time
Configuring the Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
――It is best to set Response Time to Standard or Faster when you are not
viewing a movie.
Picture
Custom
Color Mode
100
Brightness
Contrast
75
Sharpness
60
Color
Standard
Dual Color Mode
Faster
Response Time
Fastest
Accelerate the panel
response rate to make
video appear more
vivid and natural.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to Response Time and press
on the product.
on the product.
•• Standard / Faster / Fastest
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
-- The displayed image may differ depending on the model.
48
View Calibration Values
Viewing calibration settings
View calibration settings configured using the Natural Color Expert program.
Picture
Sharpness
60
Color
▶
Dual Color Mode
View calibration values
from the Natural Color
Expert program.
▶
Faster
Response Time
View Calibration Values
▶
HDMI Black Level
Reset Color Mode
▶
Color Temp.
No Data
Brightness
No Data
Black Level
No Data
R/G/B Gamma
No Data
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to View Calibration Values and press
4
Use the
5
View the option settings:
on the product.
on the product.
buttons to move the focus to Calibration 1, Calibration 2 or Calibration 3.
•• Color Gamut: View the color gamut (range of color coordinates where the R/G/B values can be displayed) for each mode,
such as sRGB and Adobe RGB.
View calibration values
from the Natural Color
Expert program.
Calibration 1
No Data
Press any button on the front of the product to display the Function Key Guide. Next, press
•• Color Temp.: View the color temperature within the specified range between 4000K and 10000K.
View Calibration Values
Color Gamut
1
•• Brightness: View the specified luminance.
•• Black Level: View the specified luminance level of black.
•• R/G/B Gamma: View the gamma values of green, red and blue.
――These options can be manually customized using the Natural Color Expert program.
6
Press
to go back to the previous menu.
Image Size
Return
-- The displayed image may differ depending on the model.
49
HDMI Black Level
Configuring the HDMI Black Level Settings
If a DVD player or set-top box is connected to the product via HDMI, image quality
degradation (contrast/color degradation, black level, etc.) may occur, depending
on the connected source device. In such case, HDMI Black Level can be used to
adjust the image quality. If this is the case, correct the degraded picture quality
using HDMI Black Level.
――This function is only available in HDMI mode.
Picture
Sharpness
60
Color
▶
Dual Color Mode
▶
Faster
Response Time
View Calibration Values
Normal
HDMI Black Level
Low
▶
표준
Reset Color Mode
Optimize HDMI picture
brightness and contrast
by adjusting the black
level of the video signal.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Picture and press
3
Press
to move to HDMI Black Level and press
on the product.
on the product.
•• Normal: Select this mode when there is no contrast ratio degradation.
•• Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
――HDMI Black Level may not be compatible with some source devices.
▶
-- The displayed image may differ depending on the model.
50
Reset Color Mode
Configuring Reset Color Mode
1
Resets your current color mode to its default settings.
Sharpness
60
Color
▶
▶
View Calibration Values
▶
HDMI Black Level
Normal
Reset Color Mode
▶
Picture
60
Sharpness
Color
Dual Color Mode
Reset the current color
mode to its default
settings.
Faster
Response Time
to display the
corresponding menu screen.
Picture
Dual Color Mode
Press any button on the front of the product to display the Function Key Guide. Next, press
2
Press
to move to Picture and press
3
Press
to move to Reset Color Mode and press
4
Press
to move to the option you want and press
5
The selected option will be applied.
on the product.
on the product.
.
Reset the current color
mode to its default
settings.
▶
Are you sure you want to reset the Color Mode?
▶
Faster
Response Time
View Calibration Values
Yes
No
▶
HDMI Black Level
Normal
Reset Color Mode
▶
-- The displayed image may differ depending on the model.
51
Chapter 06
Screen Adjustment
Image Size
Changing the Image Size
Change the picture size.
――This menu is not available when PIP/PBP Mode is set to On and the Size is set
to
,
(PBP Mode).
In PC mode
Screen
Image Size
Auto
와이드
H-Position
Wide
3
V-Position
PIP/PBP
3
Choose the size and
aspect ratio of the
picture displayed on
screen.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Screen and press
3
Press
to move to Image Size and press
on the product.
on the product.
In PC mode
•• Auto: Display the picture according to the aspect ratio of the input source.
•• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
▶
52
In AV mode
In AV mode
•• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
Screen
Image Size
4:3
H-Position
16:9
3
V-Position
Screen Fit
3
와이드
PIP/PBP
Choose the size and
aspect ratio of the
picture displayed on
screen.
•• 16:9: Display the picture with an aspect ratio of 16:9.
•• Screen Fit: Display the picture with the original aspect ratio without cutting off.
――Changing the screen size is available when the following conditions are satisfied.
The function may not be supported depending on the ports provided with the product.
――A digital output device is connected using the DVI/HDMI/DP cable.
▶
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of
these signals.).
――This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV.
-- The displayed image may differ depending on the model.
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
53
H-Position & V-Position
Configuring H-Position & V-Position
1
H-Position: Move the screen to the left or right.
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
V-Position: Move the screen up or down.
――This menu is only available when Image Size is set to Screen Fit in AV Mode.
When a 480P or 576P or 720P or 1080P signal is input in AV mode and the
monitor can display normally, select Screen Fit to adjust horizontal position in
0-6 levels.
――Not available when PIP/PBP Mode is set to On.
Screen
Image Size
Screen Fit
H-Position
3
Move the image
displayed on the screen
to the left or right.
2
Press
to move to Screen and press
3
Press
to move to H-Position or V-Position, and press
4
Press
to configure H-Position or V-Position.
5
The selected option will be applied.
on the product.
.
3
V-Position
PIP/PBP
▶
Screen
Image Size
Screen Fit
H-Position
3
V-Position
PIP/PBP
Move the image
displayed on the screen
up or down.
3
▶
-- The displayed image may differ depending on the model.
54
――The PIP/PBP function may not be available depending on the specifications of the graphics card used.
PIP/PBP
If the screen is blank in PIP/PBP mode when the optimum resolution is selected, go to Control Panel
Screen Resolution and click Detect on the PC. (Instructions are based on Windows 7.)
The PIP (Picture in Picture) function separates the screen into two parts. One
source device is displayed on the main screen at the same time the another
source device is displayed in inset windows.
Running the PBP (Picture by Picture: split screen) feature splits the screen into two
or four screens. Screens from different external devices are displayed on each of
the divided screens at the same time.
Screen
Image Size
Screen Fit
H-Position
3
V-Position
3
PIP/PBP
-- The displayed image may differ depending on the model.
Display
If the screen is blank when the resolution is set to the optimal resolution, change the resolution as follows:
――If split into two screens: 1920 x 2160 (if rotated: 2160 x 1920)
――If split into four screens: 1920 x 1080 (if rotated: 2160 x 960)
Configure the options
for the PIP/PBP feature.
▶
――To maximize the picture quality, a graphics card that supports the following resolutions is recommended:
――If split into two screens: 1920 x 2160 (if rotated: 2160 x 1920)
――If split into four screens: 1920 x 1080 (if rotated: 2160 x 960)
――When the PIP/PBP function is enabled, the resolution may not automatically switch to the optimum resolution due to a
compatibility issue between the graphics card and the Windows operating system.
Set PIP/PBP Mode to Off or manually change the resolution to the optimum resolution using the Windows interface.
55
Configuring PIP/PBP Mode
Enable or disable the PIP/PBP Mode function.
1
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
Off
와이드
Size
수평 위치
On
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
Source
Image Size
Turn PIP/PBP Mode on
or off.
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to PIP/PBP Mode and press
on the product.
on the product.
▶
DisplayPort1/DisplayPort2/HDMI/DVI
Wide/Wide/Wide/Wide
Contrast&Color
-- The displayed image may differ depending on the model.
on the product.
•• Off / On
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
56
Configuring Size
Select the size and aspect ratio of the sub-screen.
1
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
Position
수직 위치
Sound
Source
동시 화면
모드
Source
Image Size
Contrast&Color
-- The displayed image may differ depending on the model.
Select the size and
aspect ratio of the
sub-screen.
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Size and press
on the product.
3
3
on the product.
▶
on the product.
••
: Split the screen into four parts to enable PBP mode. PBP mode supports a maximum of four input sources and
features an optimal resolution of 1920 x 1080 (width x height).
••
: Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the
screen is 1920 x 2160 (width x height).
••
: Select the icon image if you want to use PIP mode where the optimum resolution for the sub-screen is 720 x 480
(width x height).
••
: Select the icon image if you want to use PIP mode where the optimum resolution of the sub-screen is 1280 x 720
(width x height).
••
: Select the icon image if you want to use PIP mode where the optimum resolution of the sub-screen is 1920 x 1080
(width x height).
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
57
Configuring Position
――Not available if Size is set to
or
Select the position of the sub-screen from the available options.
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
1
(PBP mode).
On
와이드
Size
수평 위치
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
▶
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
Select the position of
the sub-screen from the
available options.
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
on the product.
4
Press
to move to Position and press
on the product.
on the product.
Source
Image Size
••
Contrast&Color
/
/
/
――Not available when PBP is selected.
――The screen may flicker if the input signal is unstable.
-- The displayed image may differ depending on the model.
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
58
Configuring Sound Source
Set which screen you want to hear the sound for.
1
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
3
Sound
Source
동시 화면
모드
Image Size
to display the
corresponding menu screen.
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Sound Source and press
on the product.
3
Position
수직 위치
Source
Set which screen you
want to hear the sound
for.
Press any button on the front of the product to display the Function Key Guide. Next, press
on the product.
▶
DisplayPort1/DisplayPort2/HDMI/DVI
Wide/Wide/Wide/Wide
Contrast&Color
on the product.
――The gray area in each icon refers to the sound source (Sound Source). The source of sound can be from the main or sub
screen or the left or right screen.
-- The displayed image may differ depending on the model.
(available in PIP mode(Size
/
/
))
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
Set which screen you
want to hear the sound
for.
▶
Source
Image Size
Contrast&Color
••
/
59
(available in PBP mode(Size
))
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
Set which screen you
want to hear the sound
for.
▶
Source
Image Size
Contrast&Color
••
/
(available in PBP mode(Size
))
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
Set which screen you
want to hear the sound
for.
▶
Source
Image Size
Contrast&Color
••
/
/
/
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
60
Configuring Source
Select the source for each screen.
1
PIP Mode
(available in PIP mode(Size
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
/
/
))
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
▶
Source
DisplayPort1
Image Size
DisplayPort2
Contrast&Color
HDMI
DVI
-- The displayed image may differ depending on the model.
Select the source for
each screen.
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Source and press
on the product.
on the product.
on the product.
•• DisplayPort1 / DisplayPort2 / HDMI / DVI
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
――The input source of the sub screen will be changed.
――Select another input source that is not the current input source.
――The screen may flicker if the input signal is unstable.
――If the function button description page appears, press
DisplayPort2
HDMI
. The main screen will switch in the order DisplayPort1
DVI.
61
PBP Mode
Select an input source for the device displayed on each of the divided screens.
(available in PBP mode(Size
1
))
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
Source
DisplayPort1
DisplayPort2
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Source and press
on the product.
on the product.
on the product.
•• DisplayPort1 / DisplayPort2 / HDMI / DVI
HDMI
DVI
5
Use
6
Press
Pressing
and
/
to select an input source for each of the divided screens.
to move to Apply and press
on the product. The selected option will be applied.
when Cancel is selected will clear the Source settings and display the PIP/PBP control menu page.
――The screen may flicker if the input signal is unstable.
――If the function button description page appears, press
Apply
. The select input source menu will appear.
Cancel
-- The displayed image may differ depending on the model.
62
(available in PBP mode(Size
))
Select input sources for the devices displayed on the main and sub screens.
1
Source
DisplayPort1
DisplayPort2
Press any button on the front of the product to display the Function Key Guide. Next, press
corresponding menu screen.
Apply
Cancel
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Source and press
on the product.
on the product.
on the product.
•• DisplayPort1 / DisplayPort2 / HDMI / DVI
5
Use
6
Press
Pressing
-- The displayed image may differ depending on the model.
to display the
and
/
to select input sources for the left and right screens.
to move to Apply and press
on the product. The selected option will be applied.
when Cancel is selected will clear the Source settings and display the PIP/PBP control menu page.
――The screen may flicker if the input signal is unstable.
――When the input signal of the left and right screens are the same, the operation cannot be performed.
――If the function button description page appears, press
. The select input source menu will appear.
63
Configuring Image Size
Select the image size for sub-screen.
1
PIP Mode
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
In PC mode
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
Select the image size for
each screen.
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Image Size and press
on the product.
on the product.
on the product.
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
(available in PIP mode(Size
/
/
))
▶
Source
HDMI
Image Size
Auto
Contrast&Color
Wide
In PC mode
•• Auto: Display the picture according to the aspect ratio of the each screen input source.
•• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source.
In AV mode
In AV mode
•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
On
와이드
Size
수평 위치
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
Select the image size for
each screen.
•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
-- A digital output device is connected using the DVI/HDMI/DP cable.
-- The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of
these signals.).
-- This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV.
▶
Source
HDMI
Image Size
4:3
Contrast&Color
16:9
Screen Fit
-- The displayed image may differ depending on the model.
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
64
PBP Mode
Set the Image Size for each of the divided screens.
(available in PBP mode(Size
1
))
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Screen and press
Wide
3
Press
to move to PIP/PBP and press
Wide
4
Press
to move to Image Size and press
Wide
In PC mode
Image Size
on the product.
on the product.
on the product.
•• Auto: Display the picture according to the aspect ratio of the each screen input source.
Wide
Apply
•• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source.
In AV mode
Cancel
(available in PBP mode(Size
•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
))
•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
Image Size
-- A digital output device is connected using the DVI/HDMI/DP cable.
-- The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of
these signals.).
-- This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV.
Apply
Wide
Wide
Cancel
5
Use
and
/
to specify the Image Size for each of the divided screens.
6
Use
and
/
to move the focus to Apply and press
7
The selected option will be applied.
.
-- The displayed image may differ depending on the model.
65
Configuring Contrast&Color
Set the Contrast and Color(Red, Green and Blue)for the sub screen.
1
PIP Mode
to display the
corresponding menu screen.
PIP/PBP
스크린
PIP/PBP
화면 크기Mode
Press any button on the front of the product to display the Function Key Guide. Next, press
On
와이드
Size
수평 위치
3
Position
수직 위치
3
Sound
Source
동시 화면
모드
▶
Source
HDMI
Image Size
Wide
Contrast&Color
-- The displayed image may differ depending on the model.
Adjust the contrast level
for each screen.
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Contrast&Color and press
on the product.
on the product.
on the product.
•• Contrast / Red / Green / Blue
5
Use
6
Press
7
The selected option will be applied.
to move the focus to a specific option and customize the value using
.
to save changes.
66
PBP Mode
Set the Contrast and Color(Red, Green and Blue)for each screen.
(available in PBP mode(Size
1
))
Contrast
to display the
corresponding menu screen.
Contrast&Color
R/G/B Gamma
Press any button on the front of the product to display the Function Key Guide. Next, press
: 75
: 50/50/50
Cancel
2
Press
to move to Screen and press
3
Press
to move to PIP/PBP and press
4
Press
to move to Contrast&Color and press
5
Use
and
/
on the product.
on the product.
on the product.
to move the focus to a specific screen and press
.
•• Contrast / Red / Green / Blue
(available in PBP mode(Size
))
Contrast&Color
Contrast
R/G/B Gamma
6
Use
7
Press
8
The selected option will be applied.
to move the focus to a specific option and customize the value using
.
to save changes.
: 75
: 50/50/50
Cancel
-- The displayed image may differ depending on the model.
67
Chapter 07
Coordinating OSD
A detailed description of each function is provided. Refer to your product for details.
Language
Configuring Language
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu
display.
――It will not be applied to other functions on your PC.
Options
Set the menu language.
Language
Deutsch
Display Time
English
사용자 조정
50
Español
98
Français
Italiano
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Options and press
3
Press
to move to Language and press
4
Press
to move to the language you want and press
5
The selected option will be applied.
on the product.
on the product.
.
200 초
Magyar
Polski
-- The displayed image may differ depending on the model.
68
Display Time
Configuring Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is
not used for a specified period of time.
Display Time can be used to specify the time after which you want the OSD
menu to disappear.
Options
English
Language
Display Time
5 sec
10 sec
20 sec
200 sec
Set how long the menu
window will remain on
screen for when it is not
in use.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Options and press
3
Press
to move to Display Time and press
on the product.
on the product.
•• 5 sec / 10 sec / 20 sec / 200 sec
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
-- The displayed image may differ depending on the model.
69
Chapter 08
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
Eco Saving
Configuring Eco Saving
The Eco Saving function reduces power consumption by controlling the electric
current used by the monitor panel.
Settings
Eco Saving
Adjust the power
consumption of the
product to save energy.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Settings and press
3
Press
to move to Eco Saving and press
on the product.
on the product.
Off
Minimum
해제
USB Super Charging
PC/AV Mode
Maximum
▶
•• Off: Deactivate the Eco Saving function.
▶
•• Minimum: Change the monitor power consumption to 50% of the default level.
Source Detection
Auto
•• Maximum: Change the monitor power consumption to 75% of the default level.
Key Repeat Time
Acceleration
▶
DisplayPort Ver.
Off Timer
▶
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
-- The displayed image may differ depending on the model.
70
USB Super Charging
――Setting USB Super Charging to On during a data transfer will stop the data transfer. If you set USB Super Charging to Off,
Charge the battery of a connected source device quickly using the USB 3.0 port
on the product.
ports. The speed depends on the connected devices.
――To properly charge USB devices in power-saving mode, set USB Super Charging to On. The connected device will charge
the standard charging and data transfer feature will be available.
――High-speed charging is possible using the
and
ports only. These ports charge devices faster than typical USB
according to USB 2.0 (0.45A or more) or USB 3.0 (0.90A or more) specifications.
Settings
Eco Saving
Off
USB Super Charging
▶
PC/AV Mode
▶
DisplayPort Ver.
▶
Source Detection
Auto
Key Repeat Time
Acceleration
Off Timer
USB1
에코 세이빙
Off
해제
해제
USB2
USB 고속 충전
On
해제
▶
PC/AV 모드
▶
DisplayPort 버전
▶
키반복 시간설정
자동
Configuring USB Super Charging
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
▶
USB Super Charging
설정
입력 인식
Set the USB Super
charging mode.
Set the USB Port1
charging On/Off.
2
Press
to move to Settings and press
3
Press
to move to USB Super Charging and press
4
Select a USB port that will be used for USB Super Charging.
on the product.
on the product.
•• Off: Disable USB Super Charging.
•• On: Enable the function to quickly charge a source device connected to the USB 3.0 port.
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
가속반복
꺼짐 예약
▶
-- The displayed image may differ depending on the model.
71
――Supplied for the wide models only such as 16:9 or 16:10.
PC/AV Mode
――If the monitor (when set to DVI, HDMI, DisplayPort1 or DisplayPort2) is in power saving mode or is displaying the
message Check Signal Cable, press the
button to display the On Screen Display(OSD). You can select PC or AV.
Set PC/AV Mode to AV. The picture size will be enlarged.
Configuring PC/AV Mode
This option is useful when you view a movie.
Settings
Eco Saving
Off
USB Super Charging
▶
PC/AV Mode
▶
DisplayPort Ver.
▶
Source Detection
Auto
Key Repeat Time
Acceleration
Off Timer
Set to AV to enlarge the
picture.
▶
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Settings and press
3
Press
to move to PC/AV Mode and press
4
Press
to move to DisplayPort1, DisplayPort2, HDMI or DVI and press
on the product.
on the product.
on the product.
•• Set to PC when connected to a PC.
•• Set to AV when connected to an AV device.
PC/AV Mode
설정
DisplayPort1
에코 세이빙
PC
DisplayPort2
PC/AV 모드
AV
HDMI
입력 인식
DVI
키반복 시간설정
해제
해제
최소
▶
최대
PC
자동
Select the PC/AV mode
for the DisplayPort1
source.
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
PC
가속반복
꺼짐 예약
▶
모두 초기화
-- The displayed image may differ depending on the model.
72
――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
DisplayPort Ver.
――If the monitor (when set to DisplayPort1 or DisplayPort2) is in power saving mode or is displaying the message Check
Signal Cable, press the
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2
supports High Bit Rate 2.
Settings
Eco Saving
Off
USB Super Charging
▶
PC/AV Mode
▶
DisplayPort Ver.
▶
Source Detection
Auto
Key Repeat Time
Acceleration
Off Timer
DisplayPort1
에코 세이빙
1.1
DisplayPort2
PC/AV 모드
1.2
키반복 시간설정
해제
1.2
해제
최소
1.2
▶
최대
자동
Configuring DisplayPort Ver.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Settings and press
3
Press
to move to DisplayPort Ver. and press
on the product.
on the product.
•• 1.1 / 1.2
▶
DisplayPort Ver.
설정
입력 인식
Select your Displayport.
Displayport 1.1
supports HBR 1, while
1.2 supports HBR 2.
button to display the On Screen Display (OSD). You can select 1.1 or 1.2.
Select your Displayport.
Displayport 1.1
supports HBR 1, while
1.2 supports HBR 2.
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
가속반복
꺼짐 예약
▶
모두 초기화
-- The displayed image may differ depending on the model.
73
Source Detection
Configuring Source Detection
1
You can activate Source Detection.
――Not available when PIP/PBP Mode is set to On.
USB Super Charging
▶
PC/AV Mode
▶
DisplayPort Ver.
▶
Key Repeat Time
Auto
Manual
to display the
corresponding menu screen.
Settings
Source Detection
Press any button on the front of the product to display the Function Key Guide. Next, press
가속반복
Off Timer
Reset All
Decide how input
sources will be detected.
2
Press
to move to Settings and press
3
Press
to move to Source Detection and press
on the product.
on the product.
•• Auto: The input source is automatically recognized.
•• Manual: Manually select an input source.
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
▶
-- The displayed image may differ depending on the model.
74
Key Repeat Time
Configuring Key Repeat Time
Control the response rate of a button when the button is pressed.
Settings
USB Super Charging
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
▶
Acceleration
1 sec
2 sec
No Repeat
▶
자동
가속반복
Off Timer
Reset All
▶
Configure the
response rate of a
button when the
button is pressed.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Settings and press
3
Press
to move to Key Repeat Time and press
on the product.
on the product.
•• Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is
pressed.
4
Press
5
The selected option will be applied.
to move to the option you want and press
.
-- The displayed image may differ depending on the model.
75
Off Timer
Configuring Off Timer
1
You can set the product to automatically turn off.
USB Super Charging
▶
PC/AV Mode
▶
DisplayPort Ver.
Enable or disable the
Off Timer.
▶
Source Detection
Auto
Key Repeat Time
Acceleration
Off Timer
2
Press
to move to Settings and press
3
Press
to move to Off Timer and press
on the product.
4
Press
to move to Off Timer and press
on the product.
on the product.
•• Off: Deactivate the off timer so that the product does not power off automatically.
▶
•• On: Activate the off timer so that the product powers off automatically.
Reset All
Off Timer
설정
Off
에코Timer
세이빙
Off
해제
해제
Turn
Off모드
After
PC/AV
On
4
▶
키반복 시간설정
to display the
corresponding menu screen.
Settings
입력 인식
Press any button on the front of the product to display the Function Key Guide. Next, press
Enable or disable the
Off Timer.
5
Press
6
The selected option will be applied.
to move to the option you want and press
.
자동
가속반복
꺼짐 예약
▶
모두 초기화
-- The displayed image may differ depending on the model.
76
Off Timer
설정
Off
에코Timer
세이빙
Off
해제
Turn
Off모드
After
PC/AV
입력 인식
키반복 시간설정
4h
▶
자동
Set the monitor to
automatically turn off
after a certain time
period.
Configuring Turn Off After
――This option is only available when Off Timer is set to On.
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
가속반복
꺼짐 예약
모두 초기화
▶
2
Press
to move to Settings and press
3
Press
to move to Off Timer and press
4
Press
to move to Turn Off After and press
5
Press
to configure Turn Off After.
6
The selected option will be applied.
on the product.
on the product.
on the product.
-- The displayed image may differ depending on the model.
――The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number
of hours.
――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers
on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to MENU
Settings and set Off Timer to Off.
77
Reset All
Initializing Settings (Reset All)
Return all the settings for the product to the default factory settings.
Settings
USB Super Charging
▶
PC/AV Mode
▶
DisplayPort Ver.
Return all the settings
for the product to the
default factory settings.
▶
Source Detection
Auto
Key Repeat Time
Acceleration
Off Timer
▶
1
Press any button on the front of the product to display the Function Key Guide. Next, press
to display the
corresponding menu screen.
2
Press
to move to Settings and press
on the product.
3
Press
to move to Reset All and press
on the product.
4
Press
to move to the option you want and press
5
The selected option will be applied.
.
Reset All
Settings
USB Super Charging
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
▶
Return all the settings
for the product to the
default factory settings.
▶
Reset all settings?
Yes
No
▶
Off Timer
Reset All
-- The displayed image may differ depending on the model.
78
Chapter 09
Information Menu and Others
A detailed description of each function is provided. Refer to your product for details.
Information
Picture
Screen
View the current input source, frequency and resolution.
Options
Displaying Information
1
Settings
Press any button on the front of the product to display the Function Key Guide. Next, press
display the corresponding menu screen.
2
Press
to
Information
DisplayPort1
****x****
**kHz **Hz
HDMI
****x****
**kHz **Hz
DisplayPort1
****x****
**kHz **Hz
HDMI
****x****
**kHz **Hz
to move to Information. The current input source, frequency and resolution will
appear.
Picture
Screen
Picture
Options
Screen
Settings
Options
Information
Settings
Information
DisplayPort1
****x****
**kHz **Hz
-- The displayed image may differ depending on the model.
79
Configuring Brightness and
Contrast in the Initial Screen
Adjust the Brightness, Contrast using the
displays no menu screen) is displayed.
Brightness
――This menu is not available when Eco Saving is enabled.
Contrast
――This menu is not available when PIP/PBP Mode is set to On and the Size is set to
buttons when the initial screen (that
Contrast
(PBP Mode).
Press any button on the front of the product (when no menu screen is displayed) to display the Function Key Guide. Next,
press
100
Brightness
1
/
.
2
Press the
3
Adjust the Brightness, Contrast using the
button to alternate between the Brightness and Contrast settings.
buttons.
-- The displayed image may differ depending on the model.
Configuring Volume in the Initial
Screen
Adjust the Volume using the
menu screen) is displayed.
buttons when the initial screen (that displays no
Volume
――Available only when the input source is DisplayPort1, DisplayPort2 or HDMI.
1
Press any button on the front of the product (when no menu screen is displayed) to display the Function Key Guide. Next,
press
2
.
Adjust the Volume setting using the
buttons.
50
-- The displayed image may differ depending on the model.
80
Chapter 10
Installing the Software
Easy Setting Box
Easy Setting Box
Easy Setting Box enables users to use the monitor by partitioning multiple sections.
Installing the Software
1
Insert the installation CD into the CD-ROM drive.
2
Select the Easy Setting Box setup program.
――If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the Easy Setting Box setup file on the CD-ROM.
3
When the Installation Wizard appears, click Next.
4
Follow the instructions given on the screen to proceed with installation.
――The software may not work properly if you do not restart the computer after the installation.
――The Easy Setting Box icon may not appear depending on the computer system and the product
Restrictions and Problems with the Installation (Easy Setting Box)
The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.
System Requirements
OS
•• Windows Vista 32Bit/64Bit
•• Windows 7 32Bit/64Bit
•• Windows 8 32Bit/64Bit
•• Windows 8.1 32Bit/64Bit
Hardware
•• At least 32MB of memory
•• At least 60MB of free space on the hard disk drive
Removing the Software
Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs.
Select Easy Setting Box from the program list and click the Add/Delete button.
specifications.
――If the shortcut icon does not appear, press the F5 key.
81
Chapter 11
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
Before calling Samsung Customer Service
Center, test your product as follows. If
the problem persists, contact Samsung
Customer Service Center.
If the screen remains blank, check the PC
system, video controller and cable.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
1
Power off both the PC and product.
2
Disconnect the cables from the product.
3
Power on the product.
4
If the message Check Signal Cable appears, the product is working normally.
Checking the Resolution and Frequency
For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message Not Optimum Mode will appear for a short time.
――The displayed resolution may vary depending on the product or PC system settings.
82
Check the following.
Installation issue (PC mode)
Issues
Solutions
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connectors are locked.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
Screen issue
Issues
Solutions
The power LED is off. The screen will not switch on.
Check that the power cable is connected properly.
The message Check Signal Cable appears.
Check that the cable is properly connected to the product.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message appears when the signal from the graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to suit the product performance, referring to Standard
Signal Mode Table (P.91).
The images on the screen look distorted.
Check the cable connection to the product.
83
Issues
The screen is not clear. The screen is blurry.
Solutions
Remove any accessories (video extension cable, etc.) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency for the PC are within the range of resolution and frequency
compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode
Table (P.91) in this manual and the Information menu on the product.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Change the Color settings.
The colors on the screen have a shadow and are distorted.
Change the Color settings.
White does not really look white.
Change the Color settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is operating in power-saving mode.
Text is blurry.
If using a Windows OS (e.g. Windows 7, Windows 8 or Windows 8.1): Go to Control Panel
Adjust ClearType text and change Turn on ClearType.
Press any key on the keyboard or move the mouse to return to normal operating mode.
Fonts
84
Sound issue
Issues
Solutions
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.
Video is available but there is no sound.
Sound cannot be heard if a DVI cable is used to connect the input device.
Connect the device using an HDMI cable or a DP cable.
Source device issue
Issues
Solutions
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
Other issue
Issues
The ports
Solutions
and
are not working.
The USB data transfer feature is not available when the USB Super Charging feature is set to On.
To use the USB data transfer feature, go to Settings
port(USB1 or USB2), and then select Off.
USB Super Charging, select a specific USB
85
Q&A
Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel Appearance and Themes Display
Advanced Monitor, and adjust Refresh rate under Monitor settings.
•• Windows ME/2000: Go to Control Panel Display
adjust Refresh rate under Monitor settings.
Settings
Settings
Advanced
Monitor, and
•• Windows Vista: Go to Control Panel Appearance and Personalization Personalization
Display Settings Advanced Settings Monitor, and adjust Refresh rate under
Monitor settings.
•• Windows 7: Go to Control Panel Appearance and Personalization Display Screen
Resolution Advanced settings Monitor, and adjust Refresh rate under Monitor
settings.
•• Windows 8(Windows 8.1): Go to Settings Control Panel Appearance and
Personalization Display Screen Resolution Advanced settings Monitor, and
adjust Refresh rate under Monitor settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel
adjust the resolution.
Appearance and Themes
•• Windows ME/2000: Go to Control Panel
Display
Display
Settings, and
Settings, and adjust the resolution.
•• Windows Vista: Go to Control Panel Appearance and Personalization
Display Settings, and adjust the resolution.
•• Windows 7: Go to Control Panel Appearance and Personalization
Resolution, and adjust the resolution.
Personalize
Display
Adjust
•• Windows 8(Windows 8.1): Go to Settings Control Panel Appearance and
Personalization Display Adjust Resolution, and adjust the resolution.
86
Question
How do I set power-saving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel
Screen Saver Settings or BIOS SETUP on the PC.
Appearance and Themes
•• Windows ME/2000: Set power-saving mode in Control Panel
Settings or BIOS SETUP on the PC.
Display
Display
Screen Saver
•• Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8(Windows 8.1): Set power-saving mode in Settings Control Panel Appearance
and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
87
Chapter 12
Specifications
-
General
Size
Model Name
Panel
-
U32D970
Size
32 Class (31.5 Inches / 80 cm)
Display area
697.92 mm (H) x 392.58 mm (V)
27.5 Inches (H) x 15.5 Inches (V)
Display area
H
Pixel Pitch
0.18175 mm (H) x 0.18175 mm (V)
0.007156 Inches (H) x 0.007156 Inches (V)
V
Dimensions (W x H x D) /
Weight
Without Stand
28.7 x 16.8 x 2.4 Inches / 22.7 lbs
With Stand
-
727.8 x 427.3 x 62.1 mm / 10.3 kg
MIN: 727.8 x 490.6 x 280.0 mm / 13.7 kg
28.7 x 19.3 x 11.0 Inches / 30.2 lbs
Dimensions (W x H x D)
MAX: 727.8 x 620.6 x 280.0 mm / 13.7 kg
D
28.7 x 24.4 x 11.0 Inches / 30.2 lbs
VESA Mounting Interface
100 mm x 100 mm
3.9 Inches x 3.9 Inches
H
Bracket wall mount: 200 mm x 200 mm
7.9 Inches x 7.9 Inches
W
88
Model Name
U32D970
Display Color
1.07B (True 10 bit)
Color Gamut Coverage
AdobeRGB 99.5 % (Typical), 99 % (Minimum)
Maximum Pixel Clock
533.25 MHz (DP)
Power Supply
This product uses 100 to 240V. Refer to the label at the back of the product as the standard voltage can
vary in different countries.
Signal connectors
DL-DVI, HDMI, DP Port
Environmental conditions
Operating
Temperature: 50 F ~ 104 F (10 C ~ 40 C)
Humidity: 10 % - 80 %, non-condensing
Storage
Temperature: -4 F ~ 140 F (-20 C ~ 60 C)
Humidity: 5 % - 95 %, non-condensing
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect
product performance.
――This device is a Class B digital apparatus.
――Color gamut size and coverage calculated as 2-D gamut area in CIE 1931 xy color space.
Coverage is the relative display gamut area contained inside the reference gamut.
AdobeRGB is a standard defined by Adobe Systems Incorporated.
――Color performance specifications represent the typical specifications provided by SEC's measurement device(CA-310) in Factory.
: Actual performance may vary either higher or lower.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
89
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersaving mode only functions when the product is connected to a PC with a power-saving function.
PowerSaver
Normal Operation
Power saving mode
Power off (Power button)
Power Indicator
On
Blinking
Off
Power Consumption
Typical 90 W (Without USB)
0.5 W
0.5 W
Typical 130 W (With USB, Max 140 W)
――The displayed power consumption level can vary in different operating conditions or when settings are changed.
――SOG(Sync On Green) is not supported.
――To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product
for an extended period of time (during vacation, etc.).
――To properly charge USB devices in power-saving mode, set USB Super Charging to On. The connected device will charge according to USB 2.0 (0.45A or more) or USB 3.0
(0.90A or more) specifications.
90
Standard Signal Mode Table
-- This product can be set to only one
resolution for each screen size to obtain
the optimum picture quality due to the
nature of the panel. Using a resolution
other than the specified resolution may
degrade the picture quality. To avoid
this, it is recommended that you select
the optimum resolution specified for
your product.
Model Name
Synchronization
Resolution
U32D970
Horizontal Frequency
30 ~ 81 kHz
Vertical Frequency
56 ~ 75 Hz
Optimum resolution
DisplayPort1 / DisplayPort2: 3840 x 2160 @ 60 Hz
HDMI / DVI: 3840 x 2160 @ 30 Hz
Maximum resolution
DisplayPort1 / DisplayPort2: 3840 x 2160 @ 60 Hz
HDMI / DVI: 3840 x 2160 @ 30 Hz
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the
PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the
following table by referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency (Hz) Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 640 x 350
31.469
70.086
25.175
+/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
91
Resolution
-- Horizontal Frequency
The time required to scan a single line
from the left to the right side of the
screen is called a horizontal cycle. The
reciprocal number of a horizontal cycle
is called horizontal frequency. Horizontal
frequency is measured in kHz.
-- Vertical Frequency
Repeating the same picture dozens of
times per second allows you to view
natural pictures. The repeat frequency is
called "vertical frequency" or "refresh rate"
and is indicated in Hz.
Horizontal Frequency
(kHz)
Vertical Frequency (Hz) Pixel Clock (MHz)
Sync Polarity (H/V)
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 1200
75.000
60.000
162.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
VESA, 1920 x 1200
74.556
59.885
193.250
-/+
VESA, 2560 x 1440
88.787
59.951
241.500
+/-
VESA, 3840 x 2160 (30 Hz)
67.500
30.000
297.000
+/+
VESA, 3840 x 2160 (60 Hz)
133.313
59.997
533.250
+/+
92
Chapter 13
Appendix
Contact SAMSUNG WORLD WIDE
――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG (726-7864)
CANADA
1-800-SAMSUNG (726-7864)
http://www.samsung.com/us
http://www.samsung.com/ca (English)
http://www.samsung.com/ca_fr (French)
LATIN AMERICA
ARGENTINE
0800 333 3733
http://www.samsung.com.ar
BOLIVIA
800-10-7260
http://www.samsung.com
BRAZIL
CHILE
COLOMBIA
0800-124-421 (Demais cidades e regiões)
4004-0000 (Capitais e grandes centros)
800-SAMSUNG (726-7864)
01 8000 112 112
Bogotá 600 12 72
http://www.samsung.com.br
http://www.samsung.com/cl
http://www.samsung.com/co
93
LATIN AMERICA
http://www.samsung.com/latin (Spanish)
COSTA RICA
0-800-507-7267
DOMINICA
1-800-751-2676
ECUADOR
1-800-10-7267
EL SALVADOR
800-6225
GUATEMALA
1-800-299-0013
HONDURAS
800-27919267
JAMAICA
1-800-234-7267
NICARAGUA
001-800-5077267
MEXICO
01-800-SAMSUNG (726-7864)
PANAMA
800-7267
PARAGUAY
009 800 542 0001
http://www.samsung.com.py
PERU
0-800-777-08
http://www.samsung.com/pe
PUERTO RICO
1-800-682-3180
http://www.samsung.com
http://www.samsung.com/latin_en (English)
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
http://www.samsung.com
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
http://www.samsung.com
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
94
LATIN AMERICA
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864)
http://www.samsung.com
URUGUAY
000 405 437 33
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com/ve
EUROPE
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/min)
BELGIUM
02-201-24-18
BOSNIA
051 331 999
http://www.samsung.com
BULGARIA
07001 33 11 , share cost tariff
http://www.samsung.com/bg
CROATIA
062 SAMSUNG (062 726 786)
http://www.samsung.com/hr
CYPRUS
8009 4000 only from landline
http://www.samsung.com/gr
800 - SAMSUNG (800-726786)
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr (French)
CZECH
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4
DENMARK
70 70 19 70
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com/ee
FINLAND
030-6227 515
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com/fr
95
EUROPE
0180 6 SAMSUNG bzw.
GERMANY
http://www.samsung.com
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf )
GREECE
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
http://www.samsung.com/gr
HUNGARY
06-80-SAMSUNG (726-7864)
http://www.samsung.com/hu
ITALIA
800-SAMSUNG (726-7864)
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.com/lt
LUXEMBURG
261 03 710
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
http://www.samsung.com
NORWAY
815 56480
http://www.samsung.com
0 801-172-678*
POLAND
lub +48 22 607-93-33 **
*(całkowity koszt połączenia jak za 1 impuls według taryfy operatora)
http://www.samsung.com/pl
** (koszt połączenia według taryfy operatora)
PORTUGAL
808 20-SAMSUNG (808 20 7267)
http://www.samsung.com
ROMANIA
08008 SAMSUNG (08008 726 7864) TOLL FREE No.
http://www.samsung.com/ro
SERBIA
011 321 6899
http://www.samsung.com/rs
96
EUROPE
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
http://www.samsung.com
SPAIN
902172678
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848 - SAMSUNG (7267864, CHF 0.08/min)
U.K
0330 SAMSUNG (7267864)
http://www.samsung.com
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
BELARUS
810-800-500-55-500
http://www.samsung.com
GEORGIA
0-800-555-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500 (GSM: 7799)
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
MOLDOVA
0-800-614-40
http://www.samsung.com
MONGOLIA
+7-800-555-55-55
http://www.samsung.com
RUSSIA
8-800-555-55-55
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
UKRAINE
0-800-502-000
http://www.samsung.com/ch (German)
http://www.samsung.com/ch_fr (French)
CIS
http://www.samsung.com/ua (Ukrainian)
http://www.samsung.com/ua_ru (Russian)
97
CIS
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
AUSTRALIA
1300 362 603
http://www.samsung.com/au
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698 4698
ASIA PACIFIC
INDIA
INDONESIA
1800 3000 8282
1800 266 8282
0800-112-8888 (Toll Free)
(021) 56997777
http://www.samsung.com/hk (Chinese)
http://www.samsung.com/hk_en (English)
http://www.samsung.com/in
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com/nz
1-800-10-7267864 [PLDT]
PHILIPPINES
1-800-8-7267864 [Globe landline and Mobile]
http://www.samsung.com/ph
02-4222111 [Other landline]
SINGAPORE
1800-SAMSUNG (726-7864)
http://www.samsung.com/sg
TAIWAN
0800-32-9999
http://www.samsung.com/tw
98
ASIA PACIFIC
THAILAND
VIETNAM
0-2689-3232,
1800-29-3232
http://www.samsung.com/th
1800 588 889
http://www.samsung.com
ALGERIA
0800 100 100
http://www.samsung.com/n_africa
BAHRAIN
8000-4726
EGYPT
08000-726786
http://www.samsung.com
IRAN
021-8255
http://www.samsung.com
MENA
JORDAN
0800-22273
06 5777444
KUWAIT
183-2255 (183-CALL)
MOROCCO
080 100 2255
OMAN
800-SAMSUNG (726-7864)
PAKISTAN
0800-Samsung (72678)
QATAR
800-2255 (800-CALL)
SAUDI ARABIA
920021230
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
http://www.samsung.com/Levant (English)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
http://www.samsung.com
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
http://www.samsung.com/pk/
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
http://www.samsung.com/sa
99
MENA
SYRIA
18252273
http://www.samsung.com/Levant (English)
TUNISIA
80-1000-12
http://www.samsung.com/n_africa
TURKEY
444 77 11
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
BOTSWANA
8007260000
http://www.samsung.com
BURUNDI
200
http://www.samsung.com
CAMEROON
7095-0077
http://www.samsung.com/africa_fr
COTE D’ IVOIRE
8000 0077
http://www.samsung.com/africa_fr
DRC
499999
http://www.samsung.com
AFRICA
GHANA
0800-10077
0302-200077
http://www.samsung.com/africa_en
KENYA
0800 545 545
http://www.samsung.com
NAMIBIA
08 197 267 864
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com/africa_en
MOZAMBIQUE
847267864 / 827267864
http://www.samsung.com
RWANDA
9999
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com/africa_fr
100
AFRICA
SOUTH AFRICA
0860 SAMSUNG (726 7864)
http://www.samsung.com
SUDAN
1969
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
ZAMBIA
0211 350370
http://www.samsung.com
101
Responsibility for the Pay Service(Cost to
Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's program.
•• If customer requests software installation and setup for the product.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through homeshopping or online.
102
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should
not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they
can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
103
Terminology
OSD (On Screen Display)____ On
screen display (OSD) allows you to
customize on-screen settings to
optimize the picture quality as required.
You can change the screen brightness,
tint, size and many other settings using
menus displayed on the screen.
HUB____ HUB refers to a device that
is a common connection point for
multiple devices connected over a
network. It is used to connect multiple
PCs, video devices, office devices and/or
LANs over a single network.
Gamma____ The Gamma menu adjusts
the grey scale that represents middle
tones on the screen. Adjusting the
brightness brightens the whole screen,
but adjusting Gamma only brightens
the medium brightness.
Grey scale____ Scale refers to levels
of color intensity that show variations
of color change from darker areas to
brighter areas on the screen. Changes
to the screen brightness are expressed
with black and white variation, and
grey scale refers to the medium area
between black and white. Changing the
grey scale through Gamma adjustment
will change the medium brightness on
the screen.
Scanning rate____ Scanning rate, or
refresh rate, refers to the frequency
of screen refreshes. Screen data is
transmitted as it refreshes to display
an image, although the refreshing is
invisible to the naked eye. The number
of screen refreshes is called scanning
rate and is measured in Hz. A scanning
rate of 60Hz means that the screen
refreshes 60 times per second. The
screen scanning rate depends on the
performance of the graphics cards in
your PC and monitor.
Dot Pitch____ The product and screen
consist of red, green and blue dots.
A shorter distance between the dots
produces a higher resolution. Dot pitch
refers to the distance between the
shortest distance between dots of the
same color. Dot pitch is measured in
millimeters.
Horizontal Frequency____ Characters
or images displayed on the monitor
screen consist of numerous dots (pixels).
Pixels are transmitted in horizontal
lines, which are then arranged vertically
to create an image. The horizontal
frequency is measured in kHz and
represents how many times horizontal
lines per second are transmitted and
displayed on the monitor screen. A
horizontal frequency of 85 means that
the horizontal lines that make up an
image are transmitted 85000 times per
second. The horizontal frequency is
indicated in 85kHz.
Vertical Frequency____ One image is
made of numerous horizontal lines. The
vertical frequency is measured in Hz and
represents how many images can be
created per second by those horizontal
lines. A vertical frequency of 60 means
that an image is transmitted 60 times
per second. The vertical frequency is
also called "refresh rate" and affects
screen flicker.
Plug & Play____ The Plug & Play
feature allows the automatic exchange
of information between a monitor and
PC to produce an optimum display
environment.
The monitor uses VESA DDC
(international standard) to execute Plug
& Play.
Resolution____ Resolution is the
number of horizontal pixels and vertical
pixels that form a screen. It represents
the level of display detail. A higher
resolution displays a greater amount
of information on the screen and is
suitable for performing multiple tasks at
the same time.
E.g. A resolution of 1366 x 768 consists
of 1366 horizontal pixels (horizontal
resolution) and 768 vertical lines (vertical
resolution).
E.g. A resolution of 1920 x 1080 consists
of 1920 horizontal pixels (horizontal
resolution) and 1080 vertical lines
(vertical resolution).
104