LG 47LM6700 47" Full HD 3D compatibility Smart TV Wi-Fi Silver LED TV Owner's manual
Add to my manuals44 Pages
advertisement
OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
LM6200 series
LM6250 series
LM6400 series
LM6450 series
LM6700 series
LM7200 series
LM7600 series
P/NO : MFL67468132 (1209-REV06) www.lg.com
2 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
y y
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
WARNING/CAUTION symbol, within an equilateral triangle,
DO NOT OPEN is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
y y y y in accordance with the manufacturer’s instructions.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
y y as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
y y polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
Short-circuit
Breaker
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
IMPORTANT SAFETY INSTRUCTIONS 3 y y y y or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
y y or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
y by the manufacturer.
y storms or when unused for long periods of time.
Short-circuit
Breaker
Breaker y y vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
y y
(Can differ by country):
It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same
AC power outlet as this could result in fire or electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power
Power Supply cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and
Short-circuit
Breaker
Short-circuit
Breaker y y personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Short-circuit
Breaker deterioration, unplug it, discontinue use of
Power Supply the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
y y conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.
Short-circuit
Breaker
Power Supply
4 IMPORTANT SAFETY INSTRUCTIONS y y y electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
y do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Power Supply y y
Short-circuit
Breaker
(Except for devices which are not grounded.)
Short-circuit
Breaker
Power Supply wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Short-circuit
Breaker
Power Supply y y
POWER
Mains plug is the disconnecting device. The plug must remain readily operable.
y y wall outlet, it is not disconnected from the
AC power source even if the unit is turned off.
y y way without written authorization from LG
Electronics. Unauthorized modification could void the user’s authority to operate this product.
y y
(Can differ by country):
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the
U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Short-circuit
Breaker
Power Supply
y y
When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.
y y
Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
y y
Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.
y y from the TV, unplug the power cord and contact an authorized service center.
y y
Short-circuit or pen, or make a scratch on it.
y y y y a thunder or lightning storm.
y y not to install the TV by hanging the power and signal cables on the back of the TV.
y y to fall into the product, and do not drop anything onto the screen.
IMPORTANT SAFETY INSTRUCTIONS 5 y y
The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
y y
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
y y openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.
y y be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
6 IMPORTANT SAFETY INSTRUCTIONS
DISPOSAL (Hg lamp only used in LCD TVs)
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
Preventing “Image burn” or “Burn-in” on your TV screen y y y y for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.
y a long period of time, image burn may occur on the letterboxed area of the screen.
y screen for a long period of time (2 or more hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
For USA and Canada
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
IMPORTANT SAFETY INSTRUCTIONS 7
Viewing 3D Imaging
WARNING
Viewing Environment y y
- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness y y flashing light or particular pattern from 3D contents.
y y epilepsy, cardiac disorder, or blood pressure disease, etc.
y y
Double images or discomfort in viewing may be experienced.
y y sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.
y y contents.
Symptoms which require discontinuation or refraining from watching 3D contents y y y y the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
8 IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Viewing Environment y y
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age y y
- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.
- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.
y y
- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.
y y
- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.
Cautions when using the 3D glasses y y y y y y y y y y wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 9
LICENSES
Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX ® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified ® device that plays
DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified ® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified ® to play DivX ® video up to HD 1080p, including premium content.”
“DivX ® , DivX Certified ® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol
& DTS and the Symbol together are registered trademarks & DTS 2.0+Digital
Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit 'http://opensource.lge.com'.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to
'[email protected]'. This offer is valid for three (3) years from the date on which you purchased the product.
10 TABLE OF CONTENTS
TABLE OF CONTENTS
2 IMPORTANT SAFETY INSTRUCTIONS
7 Viewing 3D Imaging
9 LICENSES
9 OPEN SOURCE SOFTWARE NOTICE
10 TABLE OF CONTENTS
11 INSTALLATION PROCEdURE
11 ASSEMBLING ANd PREPARING
11 Unpacking
13 Optional Extras
14 Parts and buttons
16 Lifting and moving the TV
17 Setting up the TV
17 - Attaching the stand
18 - Mounting on a table
19 - Tidying cables
20 - Mounting on a wall
21 MAKING CONNECTIONS
21 Connecting to an antenna or cable
22 Connecting to a HD receiver, DVD, or VCR player
22 - HDMI Connection
23 - DVI to HDMI Connection
24 - Component Connection
25 - Composite Connection
26 Connecting to a PC
26 - HDMI Connection, DVI to HDMI
Connection or RGB Connection
28 Connecting to an Audio System
28 - Digital Optical Audio Connection
29 Connecting to a USB
30 REMOTE CONTROL
30 Magic Remote Control Functions
31 - Registering Magic Remote Control
31 - How to use Magic Remote Control
31 - Precautions to Take when Using the
Magic Remote Control
32 WATCHING TV
32 Turning the TV on for the first time
33 USING THE USER GUIdE
34 SPECIFICATIONS
40 MAINTENANCE
40 Cleaning Your TV
40 - Screen, frame, cabinet and stand
40 - Power cord
40 TROUBLESHOOTING
NOTE y y y y differ slightly from that shown in this manual.
y y from the input source or product model that you are using.
y y the future.
INSTALATION PROCEDURE / ASSEMBLING AND PREPARING 11
INSTALLATION PROCEdURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING ANd PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
y y y y y y
CAUTION
NOTE y y y y upgrade of product functions.
y y inches) thick and 18 mm (0.7 inches) width.
y y into your TV's USB port.
B
B
A A
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)
12 ASSEMBLING AND PREPARING
Magic remote control,
Batteries (AA)
(See p.30)
Stand screws
8 EA, M4 x 20
(See p.17)
Owner’s manual Cable holder
(Depending on model)
(See p.19)
Component video cable
(See p.24)
Composite video cable
(See p.24, 25)
Cinema 3D glasses
The number of 3D glasses may differ depending on the model or country.
Stand Body
(See p.17)
Stand Base
(See p.17)
Polishing cloth
(Depending on model)
Use this to remove dust from the cabinet.
Power cord
(Depending on model)
Wall mount inner spacers
4 EA
(Depending on model)
(See p.20)
Desk-mount screw
2 EA
(Depending on model)
(See p.18)
Bracket screw
M4 x 8, 2 EA
(Depending on model)
(See p.18)
Desk-mount cable
2 EA
(Depending on model)
(See p.18)
ASSEMBLING AND PREPARING 13
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
AN-MR300
Magic remote control
AG-F***
Cinema 3D glasses
AN-VC***
Video Call Camera
14 ASSEMBLING AND PREPARING
Parts and buttons
For LM6400/6450/6700/7200/7600 series
Screen
Buttons
Speakers
Remote control and intelligent 1 sensors
Power indicator
Button
/ (^ / v)
/ (+ / -)
(OK ⊙)
(SETTINGS)
(INPUT)
( ꔰ / I)
Description
Scrolls through the saved channels.
Adjusts the volume level.
Selects the highlighted menu option or confirms an input.
Accesses the main menus, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
ASSEMBLING AND PREPARING 15
For LM6200/6250 series
Screen
Remote control and intelligent sensors 1
Power indicator
Speakers
OK SETTINGS INPUT
Touch buttons 2
Touch Button v / ^
- / +
OK ⊙
SETTINGS
INPUT
ꔰ / I
Description
Scrolls through the saved channels.
Adjusts the volume level.
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
16 ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION y y this may result in damage to the screen. y y box or packing material that the TV originally came in.
y y the power cord and all cables.
y y away from you to avoid damage.
y y be at least 2 people.
y y
TV as shown in the following illustration.
y y
TV to jolts or excessive vibration.
y y upright, never turn the TV on its side or tilt towards the left or right.
y y firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING 17
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
1
4 EA
M4 x 20
Stand Body
4
Front
Stand Base
Top View
2
Wrapping bag (Depending on model)
3
CAUTION y y set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
4 EA
M4 x 20
5
CAUTION y y completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) y y force; otherwise they may be worn out and get loosened.
Protection pad
(Depending on model)
NOTE y y on a wall mount by performing the stand attachment in reverse.
18 ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.
CAUTION y y out for your fingers.
- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.
10 cm
10 cm (4 inches)
10 cm
10 cm
Front Rear
2 Connect the power cord to a wall outlet.
CAUTION y y of heat, as this may result in fire or other damage.
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view.
Securing the TV to a table
(Depending on model)
Fix the TV to a table to prevent from tilting forward, damage, and potential injury.
1 Connect the Desk-mount Cables to the Stand
Base using the Bracket Screws.
2 Fix the Desk-mount Cables to a table using the
Desk-mount Screws.
3 Once the TV is fixed, move the table close to the wall. Children may go in, causing injuries.
10˚ 10˚
M4 x 8
2 EA
WARNING y y should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
Securing the TV to a wall (optional)
(Depending on model)
ASSEMBLING AND PREPARING 19
Tidying cables
1 Gather and bind the cables with the cable management clip.
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
CAUTION y y hang on the TV.
NOTE y y large enough to support the TV securely.
y y can obtain additional accessories from your local dealer.
Cable management clip
2 Gather and bind the cables with the cable holder on the back of the TV.
Cable holder
CAUTION y y holder and cable management clip, as the cable holders may break, and injuries and damage to the TV may occur.
20 ASSEMBLING AND PREPARING
Mounting on a wall
Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
10 cm
10 cm (4 inches)
10 cm
10 cm
Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
Model
VESA (A x B)
A
B
32LM6200 42/47/55LM6200
47/55LM6250
47/55LM6400
60LM6450
42/47/55LM6700
60LM7200
47/55LM7600
200 x 200 400 x 400
Standard screw M6 M6
Number of screws 4
Wall mount bracket
(optional)
4
LSW200BX LSW400BX
CAUTION y y or install the TV. Otherwise electric shock may occur.
y y wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact the local dealer or qualified personnel.
y y cause damage to the TV and void your warranty.
y y the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
NOTE y y standard screw specifications.
y y manual and necessary parts.
y y obtain additional accessories from your local dealer.
y y on the wall mount. Make sure to use the proper length.
y y supplied with the wall mount.
y y bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket.
LSW220BX LSW420BX
Wall mount inner spacers
MAKING CONNECTIONS 21
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
NOTE y y to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device.
y y y y y y y y
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional.
VHF Antenna
UHF Antenna
ANTENNA / CABLE
Antenna
Coaxial (75Ω)
CAUTION y y the RF cable.
Copper wire y y and then connect the power cord to the power outlet to prevent damage to your TV.
Terminal
NOTE y y y y information about the antenna and cable connection. Search for antenna.
22 MAKING CONNECTIONS
Connecting to a HD receiver, DVD, or VCR player
Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.
y y y y
NOTE
Choose any HDMI input port to connect.
It does not matter which port you use.
HDMI
(*Not Provided)
DVD/ Blu-Ray / HD Cable Box / HD STB
NOTE y y
Digital y y
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/
88k/96k/176k/192k) -> Not supported DTS.
ARC (Audio Return Channel) y y
HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable.
y y
1 (ARC) port. An external audio device that supports ARC should be connected to
HDMI 1 if you wish to use ARC.
MAKING CONNECTIONS 23
DVI to HDMI Connection
Transmits the digital video signal from an external device to the TV. Connect the external device and the
TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
(*Not Provided)
(*Not Provided)
DVI OUT
AUDIO OUT
DVD/ Blu-Ray / HD Cable Box
24 MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration.
NOTE y y distorted color. y y
YELLOW
(Use the composite video cable provided.)
GREEN
(Use the component video cable provided.)
(*Not Provided)
(*Not Provided)
L
AUDIO
R
VIDEO
DVD/ Blu-Ray / HD Cable Box
MAKING CONNECTIONS 25
Composite Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.
y y
NOTE
YELLOW
(Use the composite video cable provided.)
(*Not Provided)
VIDEO L ( MONO ) AUDIO R
VCR / DVD/ Blu-Ray / HD Cable Box
26 MAKING CONNECTIONS
Connecting to a PC
NOTE y y y y y y brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
y y y y on the screen properly.
HDMI Connection, DVI to HDMI Connection or RGB Connection
Choose method A, B, or C to make connection.
Method A: HdMI Connection
Choose any HDMI input port to connect.
It is recommended to connect the DVI-HDMI to HDMI IN 4.
HDMI
(*Not Provided)
PC
AUDIO OUT DVI OUT
RGB OUT (PC) AUDIO OUT
HDMI
Method B: dVI to HdMI Connection
MAKING CONNECTIONS 27
(*Not Provided)
HDMI
(*Not Provided)
Method C: RGB Connection
AUDIO OUT DVI OUT
PC
AUDIO OUT DVI OUT
RGB OUT (PC) AUDIO OUT
RGB OUT (PC) AUDIO OUT
PC
28 MAKING CONNECTIONS
Connecting to an Audio System
You may use an optional external audio system instead of the built-in speaker.
NOTE y y to off.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.
y y y y
NOTE
OUT
OPTICAL
DIGITAL
AUDIO
Digital Audio System
OPTICAL AUDIO IN
Connecting to an Audio System
You may use an optional external audio system instead of the built-in speaker.
NOTE y y to off.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.
y y y y
NOTE
MAKING CONNECTIONS 29
Connecting to a USB
Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files.
NOTE y y port.
y y y y it to the USB port on the TV directly.
Choose any USB input port to connect.
It does not matter which port you use.
(*Not Provided)
USB
USB Apps OR
30 REMOTE CONTROL
REMOTE CONTROL
Magic Remote Control Functions
When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
CAUTION y y
Make sure to point the remote control at the remote control sensor on the TV.
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
BACK
Returns to the previous level.
Wheel (OK)
Selects menus or options and confirms your input.
Scrolls through the saved channels.
If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control.
To display the pointer again, shake the
Magic remote control from side to side.
Used for viewing 3D video.
HOME
Accesses the Home menu.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
VOL
Adjusts the volume level.
CH
Scrolls through the saved channels.
(MUTE)
Mutes all sounds.
MY APPS
Shows the list of Apps.
Q.MENU
Accesses the quick menu.
REMOTE CONTROL 31
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your TV.
Once you purchased the TV, please register the
Magic remote control as follows;
How to register the Magic Remote Control
(Wheel)
To register automatically, turn the TV on and press the Wheel (OK). When registration is completed, the completion message appears on the screen.
If registration fails, turn the TV off and back on, then press the Wheel (OK) to complete registration.
How to Re-register the Magic Remote Control
BACK
HOME
1 Press and hold the BACK and
HOME buttons together for 5 seconds to reset, then register it by following
“How to register the Magic remote control” above.
2 To re-register the Magic remote control, press and hold the BACK button for 5 seconds toward the TV.
How to use Magic Remote Control
1 You can move the pointer by aiming the
Pointer Receiver of the remote control at your TV then move it left, right, up or down.
» y leave the remote control for 10 seconds then use it again.
2 If the pointer disappears, move the remote control slightly to left or right.
Then, it will automatically appear on the screen.
» y certain period of time, it will disappear.
i
1 2
3
1
If you press Wheel (OK) on the Magic remote control, the screen appears.
Shows information about the current program and screen.
2
Pressing this button will display number keypad which you can select channel number.
3 You can select My Apps Menu.
Precautions to Take when Using the Magic Remote Control
y y maximum communication distance (10 m,
32.8ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure.
y y nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote control.
y y or may malfunction if it is dropped or receives a heavy impact.
y y or other people when using the Magic remote control.
y y service related to human safety as the applicable wireless device has possibility of electric wave interference.
y y be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than
1 m (3.28 ft), the Magic remote control may not perform as expected due to frequency interference.
32 WATCHING TV
WATCHING TV
Turning the TV on for the first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language and customize the basic settings.
1 Connect the power cord to a power outlet.
2 In Standby mode, press the power button on the remote control to turn the TV on.
The Initial setting screen appears if you turn the TV on for the first time.
NOTE y y Initial Setting by accessing OPTION in the main menu.
3 Follow the on-screen instructions to customize your TV settings according to your preferences.
Language Selection*
Selects a language to display.
Using the Magic remote control
Sets the Magic remote contol.
Enviroment Selection
Select Home* for the home environment.
Time Zone Setting
Selects the time zone and daylight saving.
(Depending on country)
Network Connection
Sets your network to enable network-related features on the TV.
Auto Tuning
Scans and saves available channels automatically.
Auto Energy Saving mode Setting
Selects Auto Energy
Saving mode.
(Depending on model)
Setting is completed.
Confirms the setting options.
NOTE y y Home when prompted. Store mode puts the TV in demo mode.
y y Store, the any customized settings will switch back to the default settings of Store in 5 minutes.
4 When the basic settings are complete, press the Wheel (OK).
NOTE y y it will appear whenever the TV turns on.
y y power outlet when you do not use the TV for a long period of time.
5 To turn the TV off, press the power button on the remote control.
USING THE USER GUIDE 33
USING THE USER
GUIdE
User Guide allows you to more easily access the detailed TV information.
1 Press HOME button to access the HOME menu.
2 Select User Guide and press the Wheel (OK).
User Guide
CHANNEL Setting
PICTURE, SOUND Setting
OPTION
LG SMART Function
Advabced Function
Information
1
OPTION > To set language
HOME Settings OPTION Language
Selects Menu Language and Audio Language displayed on the screen.
Menu
Language
Selects a screen menu language.
Audio
Language
Voice Search
Language
[In Digital Mode Only]
Selects the desired language when watching digital broadcasting containing several audio languages.
Select the language to make voice search.
✎ Only the voice search adopted model can support this setting.
Try Now Close
2 3
Zoom In
HOME Settings OPTION Language
Selects Menu Language and Audio Language displayed on the screen.
Menu
Language
Selects a screen menu language.
Audio
Language
Voice Search
Language
[In Digital Mode Only]
Selects the desired language when watching digital broadcasting containing several audio languages.
Select the language to make voice search.
✎ Only the voice search adopted model can support this setting.
User Guide
1
User Guide
CHANNEL Setting
PICTURE, SOUND Setting
OPTION
LG SMART Function
Advabced Function
Information
2 3
To use input device
To use Energy Saving feature
To set time options
To set TV lock options
To set language
Disabled Assistance
To set Magic Remote Control
4
1 Shows the current channel.
2 Allows to select the category you want.
3
4
Allows to select the item you want.
You can use / button to move between pages.
Allows to browse the description of the function you want from the index.
Try Now Zoom Out
3
Close
1
2
Shows the description of the selected menu.
You can use / to move between pages.
Moves to the selected menu directly from the
User Guide.
3 Zooms in or out the screen.
34 SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
Television System
Program Coverage
External Antenna Impedance
Environment condition
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
LM6200, LM6250 series: AC 100 - 240 V ~ 50 / 60 Hz
The others: AC 120 V ~ 50 / 60 Hz
NTSC-M, ATSC, 64 & 256 QAM
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 Ω
0 - 40 °C
Less than 80 %
-20 - 60 °C
Less than 85 %
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
32LM6200
(32LM6200-UE)
746.0 x 528.0 x 225.0 mm
(29.3 x 20.7 x 8.8 inch)
746.0 x 462.0 x 35.5 mm
(29.3 x 18.1 x 1.3 inch)
10.0 kg (22.0 lbs)
8.5 kg (18.7 lbs)
0.8 A / 80 W
42LM6200
(42LM6200-UE)
979.0 x 670.0 x 263.0 mm
(38.5 x 26.3 x 10.3 inch)
979.0 x 594.0 x 35.5 mm
(38.5 x 23.3 x 1.3 inch)
15.3 kg (33.7 lbs)
13.1 kg (28.8 lbs)
1.0 A / 100 W
47LM6200
(47LM6200-UE)
47LM6250
(47LM6250-UD)
1089.0 x 730.0 x 263.0 mm
(42.8 x 28.7 x 10.3 inch)
1089.0 x 655.0 x 35.5 mm
(42.8 x 25.7 x 1.3 inch)
17.8 kg (39.2 lbs)
15.6 kg (34.3 lbs)
1.2 A / 120 W
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
With stand
Weight
Without stand
Current Value / Power consumption
SPECIFICATIONS 35
55LM6200
(55LM6200-UE)
55LM6250
(55LM6250-UD)
1263.0 x 830.0 x 331.0 mm
(49.7 x 32.6 x 13.0 inch)
1263.0 x 754.0 x 35.5 mm
(49.7 x 29.6 x 1.3 inch)
25.3 kg (55.7 lbs)
21.9 kg (48.2 lbs)
1.5 A / 150 W
47LM6400
(47LM6400-UA)
1073.0 x 705.0 x 263.0 mm
(42.2 x 27.7 x 10.3 inch)
1073.0 x 639.0 x 35.7 mm
(42.2 x 25.1 x 1.4 inch)
16.9 kg (37.2 lbs)
14.7 kg (32.4 lbs)
1.1 A / 110 W
55LM6400
(55LM6400-UA)
1243.2 x 799.5 x 331.0 mm
(48.9 x 31.4 x 13.0 inch)
1243.2 x 735.0 x 35.5 mm
(48.9 x 28.9 x 1.3 inch)
24.7 kg (54.4 lbs)
21.0 kg (46.2 lbs)
1.2 A / 120 W
60LM6450
(60LM6450-UA)
1358.0 x 848.0 x 331.0 mm
(53.4 x 33.3 x 13.0 inch)
1358.0 x 781.0 x 64.7 mm
(53.4 x 30.7 x 2.5 inch)
31.0 kg (68.3 lbs)
27.3 kg (60.1 lbs)
2.1 A / 210 W
36 SPECIFICATIONS
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
With stand
Weight
Without stand
Current Value / Power consumption
MODELS
Dimensions
(Width x Height x
Depth)
With stand
Without stand
Weight
With stand
Without stand
Current Value / Power consumption
42LM6700
(42LM6700-UA)
953.0 x 636.0 x 263.0 mm
(37.5 x 25.0 x 10.3 inch)
953.0 x 566.0 x 33.4 mm
(37.5 x 22.2 x 1.3 inch)
14.8 kg (32.6 lbs)
12.6 kg (27.7 lbs)
1.0 A / 100 W
47LM6700
(47LM6700-UA)
1063.0 x 701.0 x 263.0 mm
(41.8 x 27.5 x 10.3 inch)
1063.0 x 628.0 x 33.4 mm
(41.8 x 24.7 x 1.3 inch)
17.5 kg (38.5 lbs)
15.3 kg (33.7 lbs)
1.1 A / 110 W
55LM6700
(55LM6700-UA)
1232.0 x 795.0 x 331.0 mm
(48.5 x 31.2 x 13.0 inch)
1232.0 x 723.0 x 33.6 mm
(48.5 x 28.4 x 1.3 inch)
25.0 kg (55.1 lbs)
21.3 kg (46.9 lbs)
1.2 A / 120 W
60LM7200
(60LM7200-UA)
1358.0 x 848.0 x 331.0 mm
(53.4 x 33.3 x 13.0 inch)
1358.0 x 781.0 x 64.7 mm
(53.4 x 30.7 x 2.5 inch)
31.0 kg (68.3 lbs)
27.3 kg (60.1 lbs)
2.1 A / 210 W
47LM7600
(47LM7600-UA)
1063.0 x 701.0 x 263.0 mm
(41.8 x 27.5 x 10.3 inch)
1063.0 x 628.0 x 33.4 mm
(41.8 x 24.7 x 1.3 inch)
17.5 kg (38.5 lbs)
15.3 kg (33.7 lbs)
1.3 A / 130 W
55LM7600
(55LM7600-UA)
1232.0 x 795.0 x 331.0 mm
(48.5 x 31.2 x 13.0 inch)
1232.0 x 723.0 x 33.6 mm
(48.5 x 28.4 x 1.3 inch)
25.0 kg (55.1 lbs)
21.3 kg (46.9 lbs)
1.6 A / 160 W
SPECIFICATIONS 37
3D supported formats y y
Input
HDMI
USB
DLNA
DTV
Signal
640 X 480
480p
720p
1080i
1080p
1080p
1080p
3D supported mode automatically
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.469 / 31.5
62.938 / 63
31.469 / 31.5
62.938 / 63
44.96 / 45
89.91 / 90
33.72 / 33.75
67.5
26.97 / 27
28.125
33.72 / 33.75
43.94 / 54
56.25
67.432 / 67.5
67.432 / 67.5
59.94 / 60
59.94 / 60
59.94 / 60
59.94 / 60
59.94 / 60
23.97 / 24
25
29.976 / 30
23.97 / 24
25
29.976 / 30
59.94 / 60
Playable 3D video format
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
33.75
33.75
Signal
Frame Compatible
30
30
Top & Bottom, Side by Side(Half)
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo)
Side by Side(Half), Top & Bottom,
Checker Board
Playable 3D video format
Side by Side(Half), Top & Bottom
38 SPECIFICATIONS y y
Input
HDMI-DTV
HDMI-PC
RGB-PC
Component
USB
DLNA
DTV
Signal
720p
1080i
1080p
1024x768
1360x768
1920x1080
Others
1024x768
1360x768
1920x1080
Others
720p
1080i
1080p
Others
1080p
1080p
33.75
27.00
28.12
33.75
67.50
-
-
48.36
47.71
67.50
-
45.00
3D supported mode manually
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
45.00 60
Playable 3D video format
2D to 3D, Side by Side(Half), Top & Bottom,
Single Frame Sequential
2D to 3D, Side by Side(Half), Top & Bottom 33.75
27.00
28.12
33.75
60
24
25
30
2D to 3D, Side by Side(Half), Top & Bottom,
Checker Board
67.50 60
2D to 3D, Side by Side(Half), Top & Bottom,
Checker Board, Single Frame Sequential,
Row Interleaving, Column Interleaving
48.36
47.71
60
2D to 3D, Side by Side(Half), Top & Bottom
67.50
-
2D to 3D, Side by Side(Half), Top & Bottom,
Checker Board, Single Frame Sequential,
Row Interleaving, Column Interleaving
2D to 3D
60
-
60
60
24
25
30
60
-
2D to 3D, Side by Side(Half), Top & Bottom
2D to 3D
2D to 3D, Side by Side(Half), Top & Bottom
33.75
33.75
30
30
2D to 3D
2D to 3D, Side by Side(Half),Top & Bottom,
Checker Board, Row Interleaving, Column
Interleaving(Photo : Side by Side(Half),
Top & Bottom)
Signal
HD
SD
Playable 3D video format
2D to 3D, Side by Side(Half), Top & Bottom
2D to 3D
SPECIFICATIONS 39
HDMI/DVI-DTV supported mode
Resolution
720X480
1280X720
1920X1080
Horizontal
Frequency (kHz)
31.469
31.5
44.96
45
33.72
33.75
26.97
27
33.716
33.75
67.43
67.5
Vertical
Frequency
(Hz)
59.94
60
59.94
60
59.94
60
23.97
24
29.976
30.00
59.94
60
Component port connecting information
Component ports on the
TV
Video output ports on DVD player
Y
Y
Y
Y
Y
P
B
P
B
B-Y
Cb
Pb
P
R
P
R
R-Y
Cr
Pr
Wireless LAN module (TWFM-B003D) specification
Standard
Frequency Range
Modulation
Output Power (Typical)
Data rate
Antenna Gain (Typical)
Occupied bandwidth
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
CCK / OFDM / MIMO
802.11a: 15 dBm
802.11b: 14 dBm
802.11g: 17 dBm
802.11n - 2.4GHz: 17 dBm
802.11n - 5GHz: 15 dBm
802.11a/g: 54 Mbps
802.11b: 11 Mbps
802.11n: 300 Mbps
2400 to 2483.5 MHz: -2.5 dBi
5150 to 5250 MHz: -2.2 dBi
5725 to 5850 MHz: -2.9 dBi
802.11a/b/g: HT20
802.11n: HT20/40
Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.
y y
FCC ID: BEJTWFM-B003D
Signal
480i
480p
720p/1080i
1080p
Component
O
O
O
O
(60 Hz only)
Bluetooth module (BM-LDS302) specification
Standard
Frequency Range
Bluetooth Version 3.0
2400 ~ 2483.5 MHz
Output Power (Max.) 10 dBm or lower
Data rate (Max.) 3 Mbps
Communication
Distance
Line of Open Sight approx. 10 m y y
FCC ID: BEJLDS302
40 MAINTENANCE & TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION y y y y outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.
CAUTION y y scratches on the screen and image distortions.
y y lubricants, as these may damage the screen’s finish and cause discoloration.
y y malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Cannot control the TV with the remote control.
No image display and no sound is produced.
y y y y y y y y y y y y
The TV turns off suddenly.
y y y y y y minutes of inactivity.
Solution
CHILD SAFETY:
It Makes A Difference How and Where
You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
y The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
y Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.
THIS MANUFACURER CARES!
y The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
y O n e s i z e d o e s N O T f i t a l l . F o l l o w t h e m a n u f a c t u r e r ’ s recommendations for the safe installation and use of your flat panel display.
y Carefully read and understand all enclosed instructions for proper use of this product.
y Don’t allow children to climb on or play with furniture and television sets.
y Don’t allow place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
y Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display.
Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
y Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT
YOUR FLAT PANEL DISPLAY, ALWAYS:
y Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory
(such as UL, CSA, ETL).
y Follow all instructions supplied by the display and wall mount manufacturers.
y If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.
y Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction.
If you are unsure, contact a professional installer.
y A m i n i m u m o f t w o p e o p l e a r e r e q u i r e d f o r i n s t a l l a t i o n .
Flat panel displays can be heavy
The model and serial number of the TV is located on the back and one side of the TV.
Record it below should you ever need service.
MODEL
SERIAL
LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
1-800-243-0000 USA, Consumer User
1-888-865-3026
USA, Commercial User
1-888-542-2623 CANADA
Register your product Online!
www.lg.com
This product qualifies for ENERGY STAR in the
“factory default (Home Use)” setting.
Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Flat 119.4 cm (47") Edge-LED
- Full HD 1920 x 1080 pixels 16:9
- TruMotion 120 Hz
- DVB-T
- Smart TV Internet TV
- Wi-Fi Ethernet LAN