Owner's Manual
DLP PROJECTOR
Please read the safety information carefully before using the product.
PW700
www.lg.com
(Brazil : www.lge.com/br)
2
LICENSE
LICENSE
Supported licenses may differ by model. For more information about licenses,
visit www.lg.com.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format created
by DivX, LLC, a subsidiary of Rovi Corporation. This is an
official DivX Certified® device that has passed rigorous testing
to verify that it plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX
videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to
complete your registration.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks
of Rovi Corporation or its subsidiaries and are used under
license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
This device meets the EMC requirements for home appliances (Class B) and is
intended for home usage. This device can be used in all regions.
NOTE
yy Image shown may differ from your projector.
yy Your projector’s OSD (On Screen Display) may differ slightly from that shown in
this manual.
ING/CAUTION
ELECTRIC SHOCK
O NOT OPEN
SAFETY INSTRUCTIONS
3
SAFETY INSTRUCTIONS
Please take note of the safety instructions to prevent any potential accident or misuse
of the projector.
yy Safety precautions are given in two forms, i.e. WARNING and CAUTION as detailed
below.
WARNING Failure to follow the instructions may cause serious injury and even death.
CAUTION Failure to follow the instructions may cause injury to persons or damage to
the product.
yy Read the owner's manual carefully and keep it to hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION
The
lightning flash with
RISK OF ELECTRIC SHOCK
arrowhead
symbol, within
DO NOT OPEN
an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
4
SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
yy Do not use the projector outside and
do not expose the product to any
humidity or water.
- Since the product is not waterproof,
this may result in a fire or electric
shock.
yy Do not place the projector in direct
sunlight or near heat sources such as
radiators, fires, stoves, etc.
- This may result in fire.
yy Do not place flammable materials
such as aerosols near the projector.
- This may result in fire.
yy Do not allow children to cling to or
climb up to the projector.
- This may cause the projector to fall,
causing injury or death.
yy Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a closet) or on a carpet or cushion.
- This may result in fire due to the
increase in internal temperature.
yy Do not place the product close to
sources of steam, oil or oil mist, such
as humidifiers and kitchen counters.
- Failure to do so may result in fire,
electric shock, or corrosion.
yy Do not install the product onto a wall
or ceiling that is close to sources of
oil or oil mist.
- The product may be damaged and
fall, resulting in serious injury.
yy Do not place the projector where it
might be exposed to dust.
- This may result in fire.
yy Do not use the projector in a damp
place such as a bathroom where it is
likely to get wet.
- This may result in fire or electric
shock.
yy Do not allow a tablecloth or curtain to
block the air vent.
- This may result in fire due to the
increase in the internal temperature.
yy Ensure good ventilation around the
projector. The distance between the
projector and the wall should be at
least 30 cm.
- This will prevent fire due to the
increase in the internal temperature.
CAUTION
yy When placing the projector on a table
or shelf, be careful not to put it near
the edge.
- The projector could fall due to
balance problems, which may
cause personal injury or damage to
the product. Make sure to use the
projector cabinet or stand that fits the
projector.
yy When moving the projector, make
sure to switch it off and remove the
power plug and cords.
- The power cord may be damaged,
resulting in fire or electric shock.
yy Do not place the projector on an
unstable or vibrating surface such as
a wobbly shelf or a slope.
- It may fall and cause injury.
SAFETY INSTRUCTIONS
yy Be careful not to tip the projector over
when connecting external devices to
the projector.
- This may cause personal injury or
damage to the projector.
Power
WARNING
yy The appliance coupler is used as the
disconnect device.
- Please make sure the device is
installed near the wall outlet to which
it is connected and that the outlet is
easily accessible.
yy The grounding wire should be
connected.
- Ensure that you connect the
grounding cable to avoid electric
shock.
If it is not possible to ground the unit,
have a qualified electrician install a
separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods or gas pipes.
yy The power plug should be inserted
fully into the power outlet.
- An unstable connection may cause
a fire.
yy Do not place heavy objects on the
power cord.
- This may result in fire or electric
shock.
yy Never touch the power plug with wet
hands.
- This may result in electric shock.
yy Do not plug too many devices into
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
5
yy Prevent dust from collecting on the
power plug pins or outlet.
- This may result in fire.
yy To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
CAUTION
yy Hold the plug firmly when unplugging.
- A damaged wire may create a fire
hazard.
yy Ensure the power cord and plug are
not damaged, modified, severely
bent, twisted, pulled, sandwiched
or hot. Do not use the product if the
power outlet is loose.
- This may result in fire or electric shock.
yy Keep the power cord away from heating
devices.
- The wire's sheath may melt, which
may result in fire or electric shock.
yy Place the projector where people will
not trip over or tread on the power
cord to protect the power cord and
plug from any damage.
- This may result in fire or electric shock.
yy Do not turn the projector on or off
by plugging in the power plug or
unplugging it from the power outlet.
(Do not use the power plug as a switch.)
- This may result in electric shock or
damage to the product.
yy Do not insert a conductor into the other
side of the wall outlet while the power
plug is inserted into the wall outlet.
In addition, do not touch the power
plug immediately after it is disconnected
from the wall outlet.
- This may result in electric shock.
6
SAFETY INSTRUCTIONS
yy Only use the official power cord
provided by LG Electronics. Do not
use other power cords.
- This may result in fire or electric
shock.
When in Use
WARNING
yy Do not place anything containing
liquid on top of the projector such as
a vase, flower pot, cup, cosmetics, or
medicine; or ornaments, candles, etc.
- This may result in fire or electric
shock, or cause injury due to falling.
yy In the event that there is a heavy
impact or the cabinet is damaged,
switch it off, unplug it from the power
outlet and contact an authorized
service center.
- This may result in electric shock.
yy Do not insert pieces of metal such as
coins, hairpins or metal debris, nor
flammable materials such as paper or
matches into the projector.
- This is to prevent electric shock or fire.
yy In the event that liquid or a foreign
object falls into the projector, switch it
off and unplug it from the power outlet
and contact our service center.
- This may result in fire or electric
shock.
yy Make sure that a child does not
swallow the batteries when you
replace the old remote control
batteries with new ones. Keep
batteries out of reach of children.
- If a child swallows a battery, consult
a doctor immediately.
yy Never open any cover on the
projector.
- There is a high risk of electric shock.
yy Do not look directly into the lens when
the projector is in use.
- The bright light may damage your
eyes.
yy When the lamp is on or has just been
turned off, avoid touching the air vent
or lamp, because these will be very
hot.
yy If there is a gas leak in the room with
the projector, do not touch the projector
or power outlet. Open the windows
for ventilation.
- Sparks may cause fire or burns.
yy Unplug the power cord from the outlet
during a lightning storm.
- This will prevent shock or damage
to the projector.
yy Do not use the projector near
electronic devices that generate a
strong magnetic field.
yy Keep the plastic film used for
packaging the projector out of the
reach of children.
- If not handled safely, it can cause
suffocation.
yy Do not keep your hand on the projector
for a long time when it is running.
yy When you play a game by connecting
a game console to a projector, it is
recommended that you maintain a
distance of more than four times the
diagonal length of the screen.
-M
ake sure that the connecting cable is
long enough. Otherwise, the product
may fall causing personal injury or
damage to the product.
SAFETY INSTRUCTIONS
yy Do not place the projector or its
remote control with battery in
an extremely high temperature
environment.
- This may result in fire.
yy Do not use 3D glasses if you do not
watch 3D.
CAUTION
yy Do not place heavy objects on the
projector.
- It may fall down and cause personal
injury.
yy Be careful not to allow any impact to
the lens during transport.
yy Do not touch the lens of the projector.
- The lens may be damaged.
yy Do not use any sharp tools on the
projector such as a knife or hammer,
because this may damage the casing.
yy In the event that no image appears
on the screen or no sound is heard,
stop using the projector. Switch off
the projector, unplug it from the power
outlet and contact our service center.
- This may result in fire or electric
shock.
yy Do not drop anything onto the
projector or allow anything to bang
into the projector.
- This may cause damage to the
projector or personal injury.
yy It is recommended that you maintain
a distance of more than 5 - 7 times
the diagonal length of the screen.
- If you watch the screen at a close
distance for a long time, your eye
sight may become worse.
7
yy Do not block the light beam emitted
from the projector using a book or
other object.
- Lengthy exposure to the projector
beam may result in fire. In addition,
the lens may be overheated and
damaged by the reflected heat.
yy Do not start the projector with the
volume turned up high.
- High volume may damage hearing.
yy Do not use high voltage electrical
equipment near the projector, (e.g.
bug zapper). This may result in
product malfunction.
Cleaning
WARNING
yy Do not spray the projector with water
when cleaning. Make sure water does
not flow into the projector.
- This may result in fire or electric
shock.
yy When there is smoke or a strange
smell coming out from the projector or
a foreign object falls into the pro­jector,
switch it off and unplug it from the
power outlet and contact our service
center.
- Otherwise, this may result in fire or
electric shock.
yy Use air spray, a soft cloth or a cotton
swab moistened with a lens cleaning
chemical or alcohol to remove dust or
stains on the front projection lens.
8
SAFETY INSTRUCTIONS
CAUTION
yy Contact your seller or our service
center once a year to clean the
internal parts of the projector.
- If you do not clean the projector
for a long period of time, dust will
accumulate, which may result in fire
or damage to the projector.
yy When cleaning plastic parts such
as the projector case, unplug the
power first and wipe with a soft cloth.
Do not spray with water or wipe with a
wet cloth. Never use glass cleaner,
automobile or industrial shiner,
abrasives, wax, benzene, or alcohol
as these can damage the projector.
- This can result in fire, electric shock
or cause damage to the product
(deformation and corrosion).
yy Remove the plug from the outlet
before cleaning the product.
- Otherwise, this may result in electric
shock.
Others
WARNING
yy Some users may experience a
seizure or other abnormal symptoms
when they are exposed to a flashing
light or particular patterns from a
video game.
yy When you go out, place the projector
out of reach of animals, and remove
the power plug from the wall outlet.
- Using a damaged power cord may
result in short circuit or fire.
yy Do not use the projector near highprecision electronic devices or those
that transmit weak radio signal.
- This may affect the operation of the
product, causing an accident.
yy Only a qualified technician can
disassemble or modify the projector.
For diagnosis, adjustment, or repair,
contact your seller or our service
center.
- This may result in fire or electric
shock.
yy Proper ventilation required, do not
block airflow around unit. Doing
so can cause injury and internal
overheating.
yy To prevent damage to lamp, unit must
remain plugged in for approximately
3 minutes after power down to allow
for proper cool down (not applicable
on LED models).
yy Do not touch the lens; doing so can
result in burns or damage to lens.
Lens and unit may be HOT during
and immediately after use. Use
caution when handling unit, allowing
for proper cool down.
yy Only use a grounded electrical outlet.
yy Do not insert anything into or cover
up the exhaust vents.
- This may result in fire or electric
shock.
yy Follow all maintenance guidelines
for optimal use; service only at an
authorized service center.
yy Lamp contains mercury and as such
must be disposed of according to
local, state and federal laws (not
applicable on LED models).
SAFETY INSTRUCTIONS
yy Keep the batteries and remote out of
reach of children.
- This will prevent personal injury or
damage to the product.
CAUTION
yy Do not use or store the projector
outdoors for long periods of time.
yy Do not mix new batteries with old
ones.
- Burst or leaking batteries may result
in damage or injury.
yy Be sure to unplug if the projector is not
to be used for a long period.
- Accumulated dust may result in fire
or electric shock due to overheating,
ignition, or poor insulation.
yy Only use the specified type of battery.
- Burst or leaking batteries may result in
damage or injury.
yy Make sure you use the same type of
battery when replacing.
- In the case of a battery contact failure,
the battery may drain quickly or the
remote control may not work properly.
yy The battery contains lithium-ion, so it
must be handled with care.
- This may result in explosion or fire.
yy Do not charge the battery using any
equipment other than what has been
provided with the projector.
- This may damage the battery or
cause a fire.
yy Dispose of used batteries properly.
- This may result in explosion or fire.
The correct method of disposal may
vary depending on your country or
region. Dispose of the battery pack as
instructed.
yy Do not throw or disassemble the battery.
- This may result in fire or explosion
due to damage to the battery.
9
yy Always use batteries approved and
certified by LG Electronics.
- This will prevent damage or fire.
yy Store batteries away from metallic
objects, such as keys and paper clips.
- Excess current may cause a rapid
increase in temperature, resulting in
fire or burns.
yy Do not store the batteries near any
heat source, such as a heater.
- This may result in fire or damage to
the product.
yy Do not store batteries at temperatures
higher than 60 °C or in high humidity.
- This may result in explosion or fire.
yy Make sure that the battery is installed
correctly.
- This prevent explosion or fire.
yy Incorrect battery replacement may
cause fire.
Risk Group 2
CAUTION Possibly hazardous optical
radiation emitted from this product. Do
not stare at operating lamp. May be
harmful to the eye.
10
CONTENTS
CONTENTS
LICENSE2
SAFETY INSTRUCTIONS
3
PREPARATION12
Accessories12
Optional Extras
13
Parts and Components
14
Projector Status Indicators
16
Installation17
-- Installation Precautions
17
-- Projection Distance per Screen Size 18
-- How to Install the Projector On a Tripod
19
-- Kensington Security System
19
-- How to use the ferrite core
20
ENTERTAINMENT28
Using SCREEN SHARE
28
Setting Up Bluetooth on the Projector 29
-- Searching for Bluetooth Devices and
Connecting30
-- Connecting, Disconnecting, or Deleting
Bluetooth Devices in the List of registered
devices31
-- Adjusting AV Sync. Adjust
31
MY MEDIA
32
Before Using
-- Connecting a USB Device
-- Removing a USB Device
32
32
32
To Use My Media
-- Watching the Videos
-- Viewing the Photos
-- Listening to Music
-- Viewing Files
34
37
42
45
47
REMOTE CONTROL
21
USING THE PROJECTOR
23
3D FUNCTION
49
Watching Projector
-- Turning on the Projector
-- Focus of the Screen Image
-- Watching Projector
23
23
24
24
While Watching 3D
49
Additional Options
-- Adjusting Aspect Ratio
-- Using the Keystone Function
-- Changing input device
-- Blank Function
25
25
25
26
27
Watching 3D Images
54
CUSTOMIZING SETTINGS
55
Using the Quick Menu
27
Requirements for Watching 3D Images 52
-- To Use DLP-LINK (DLP-Ready) Type
Glasses54
SETTINGS55
PICTURE Settings
56
CONTENTS
AUDIO Settings61
TIME Settings62
WIRELESS Settings
63
OPTION 1 Settings64
OPTION 2 Settings65
CONNECTING DEVICES
67
Connecting to HD Receiver, DVD, VCR
Player, or External Devices
-- HDMI Connection
-- HDMI to DVI Connection
-- AV Connection
-- Component Connection
68
68
68
69
69
Connecting a PC
-- HDMI Connection
-- HDMI to DVI Connection
-- RGB Connection
70
70
70
71
Connecting a Laptop
-- HDMI Connection
72
72
Connecting to Headphones
73
Using the Mirroring Function of a Mobile
Phone74
-- MHL/Slimport Connection
74
MAINTENANCE75
Cleaning75
-- Cleaning the Lens
75
-- Cleaning the Projector Case
75
SPECIFICATIONS76
11
12
PREPARATION
PREPARATION
Accessories
Accessories included with the project are show below.
The pictures may differ slightly from the actual product.
Accessories are subject to change without prior notice.
New accessories may be added or old ones removed.
Remote Control
Two AAA Batteries
Owner's Manual
Owner's Manual CD
Computer Cable
Composite Gender
Pouch
AC-DC Adaptor
Power Cord
Ferrite core 2 EA
yy When connecting an HDMI or USB cable, or
connecting a USB flash drive to the HDMI or USB port,
use a product that has a width of 18 mm or less and a
height of 10 mm or less. If the USB cable or USB flash
drive does not fit the USB ports of the projector, use
an extension cable that supports USB 2.0.
yy Use a certified cable with the HDMI logo attached.
yy If you do not use a certified HDMI cable, the screen may not display or a connection
error may occur. (Recommended HDMI cable types)
- High-Speed HDMI®/™ Cable
- High-Speed HDMI®/™ Cable with Ethernet
PREPARATION
Optional Extras
To purchase optional accessories, visit an electronics store or online shopping site or
contact the retail store where you purchased the product. Optional accessories are
subject to change without prior notice.
Projection Screen
Tripod
HDMI Cable
Video Cable
Audio Cable
3D glasses
(DLP-LINK or DLPReady Type)
RGB to Component cable
Component Cable
MHL or Slimport cable
13
14
PREPARATION
Parts and Components
The projector is manufactured using high-precision technology. You may, however, see
tiny black dots and/or bright colored dots (red, blue or green) that continuously appear
on the projector screen. This is a normal result of the manufacturing process and does
not indicate a malfunction.
Control Panel
Speaker
Vent1
Lens2
Speaker
Focus ring
Button
(POWER)
(SETTINGS)
, , ,
(OK)
Description
Turns the projector on or off.
Displays or closes the Settings menu.
Sets the function or moves the cursor.
( , button : The volume can be adjusted according to the
input mode)
Shows the current mode and saves changes to the settings.
1 Due to the high temperature of vent area, do not get close to the vent area.
2 Do not touch the lens when using the projector. The lens may be damaged.
PREPARATION
RGB IN Port
Port
(USB Port)
(Headphone Port)
AV IN Port
DC IN Port
15
16
PREPARATION
Projector Status Indicators
LED Power Indicator
White
Off
Emits a white light and
then turns off.
LED Power Indicator
Power standby state
The projector is operating with the power on.
A button has been pressed.
PREPARATION
17
Installation
Installation Precautions
yy Place the projector in a well-ventilated
environment.
- To prevent internal heat build-up,
install the projector in a wellventilated place.
Do not place anything near the
projector as this may block its air
vents. If the air vents are blocked,
the internal temperature will
increase.
- Do not place the projector on a
carpet or rug. If the vent is on the
bottom, use the projector on a solid
level surface and ensure the vent is
not blocked.
- Be sure to prevent foreign objects
such as paper debris from entering
the projector.
- Leave enough distance (30 cm or
more) around the projector.
yy Do not place the projector in a hot
or humid environment.
- Do not place the projector in a hot,
cold, or humid environment.
y
Do
not place the projector in a place
y
where it will easily attract dust.
- This may result in fire.
y
y Never open any cover on the
projector. There is a high risk of
electric shock.
y
y The projector is manufactured using
high-precision technology. You may,
however, see tiny black dots and/
or bright colored dots (red, blue or
green) that continuously appear on
the projector screen. This is a normal
result of the manufacturing process
and does not indicate a malfunction.
y
y The remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.
18
PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or audio/video
source.
2 Place the projector an appropriate distance away from the screen. The distance
between the projector and the screen determines the actual size of the image.
3 Position the projector so that the lens is at a right angle to the screen. If the
projector is not at a right angle, the projected image will look distorted. To correct the
distortion, use the Keystone function. (see page 25.)
4 Connect the power cord of the projector and the connected device to the wall outlet.
Ratio of upward projection: 100 %
Screen Width (Y)
Screen Height (X)
Screen
X/2
X/2
Y/2
Screen
30 mm
Y/2
Projection distance (D)
Projection distance (D)
16:10 Ratio
Screen Size
(mm)
Screen Width
(Y) (mm)
Screen Height
(X) (mm)
Projection Distance
(D) (mm)
635
762
889
1016
1143
1270
1397
1524
1651
1778
1905
2032
2159
2286
2413
2540
538
646
754
861
969
1077
1185
1292
1400
1508
1615
1723
1831
1938
2046
2154
337
404
471
539
606
673
741
808
875
943
1010
1077
1145
1212
1279
1347
803
966
1130
1293
1456
1619
1783
1946
2109
2272
2436
2599
2762
2925
3089
3252
PREPARATION
19
How to Install the Projector On a Tripod
yy You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
yy When stabilizing the tripod, we recommend using a locking bolt of standard size
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the projector.)
Bolt used to
attach the
projector
Bottom side of the projector
⇒
+
The projector is
connected to this part.
Tripod
CAUTION
yy If you are using a tripod, be careful not to apply external force to the tripod. Doing
so may damage the projector.
yy Do not place the tripod on an unstable surface.
yy Be sure to use a tripod with a maximum load capacity of 3 kg or more.
yy To use the projector safely, position the tripod legs so that they are as wide and
stable as possible and be sure to securely attach the projector to the tripod.
Kensington Security System
yy This projector has a Kensington Security Standard connector. Connect a Kensington
Security System cable as shown below.
yy For more information on installation and use of the Kensington Security System,
refer to the user’s guide provided with the Kensington Security System.
yy The Kensington Security System is an optional accessory.
yy What is Kensington? Kensington is a company that provides security systems for
laptops and other electronic devices. Website: http://www.kensington.com
20
PREPARATION
How to use the ferrite core
* Use the ferrite core as illustrated below to reduce electromagnetic radiation.
* The pictures may differ slightly from the actual product.
1 Put the ferrite core around the AC/DC adaptor cable as illustrated below.
Place the ferrite core as close to the projector as possible for best results.
Cross Section
of Ferrite Core
(Gray)
Power Cord
Projector
2 Put the ferrite core around the power cable as illustrated below.
Place the ferrite core as close to the power plug as possible for best results.
Cross Section
of Ferrite Core
(Gray)
Power plug
AC/DC adaptor
REMOTE CONTROL
21
REMOTE CONTROL
Open the lid at the back of the remote control and insert
the batteries as described in the
instructions.
Use new batteries and do not mix regular or rechargeable
batteries. (1.5 V AAA)
CAUTION
yyDo not mix new batteries with old ones.
POWER
Turns the projector on or off.
USB/MY MEDIA
Accesses USB mode.
INPUT
Changes the input source.
Playback control buttons
Controls playback of MY MEDIA.
Key's ▲, ▼
Adjusts the Keystone function.
SLEEP
Sets the sleep timer.
PICTURE
Changes the picture mode per press of the button.
3D
Shows 3D images.
L/R
Switches left and right in 3D mode.
VOL +, Adjusts the volume level.
RATIO
Changes the aspect ratio of the screen
per pressing of the button.
BLANK
Blanks the screen.
MUTE
Mutes the sound of the projector.
PAGE ,
Moves to the previous/next page.
22
REMOTE CONTROL
SETTINGS
Displays or closes the Settings menu.
STILL
Freezes the moving image.
(Available in any mode other than USB mode.)
Q.MENU
Allows you to change the settings easily.
Up/Down/Left/Right buttons
Switches between menu functions.
OK
Shows the current mode and saves changes to
the settings.
Returns to the previous screen.
AUTO
Automatically adjusts the RGB-PC input image.
EXIT ꕯ
Exits the menu.
Color buttons
Sets detailed settings or gesture for each menu.
yy MARK button is used when a software update is required.
(MARK button is not available for a user.)
NOTE
yy When using the remote control, the optimal operation range is
6 meters or less (left/right) and within a 30 degree arc of the
remote control IR receiver.
yy If a cable is connected to the back port, the optimal operating 30° 30°
range is 3 meters or less (left/right) and within a 30 degree
arc of the remote control IR receiver.
yy For seamless operation, do not block the IR receiver.
yy When you carry the remote control in the portable bag, make sure that the
buttons on the remote control are not pressed by the projector, cables,
documents or any other accessories in the bag. Otherwise, it may significantly
reduce the battery life.
USING THE PROJECTOR
USING THE PROJECTOR
Watching Projector
Turning on the Projector
The menu screen display in this owner's manual is an example to help users
understand how to operate the product and may look different from the actual screen.
1 Connect the power cord correctly.
2 After waiting for a moment, press the POWER button on the remote control or the
control panel.
3 In the Language Selection screen, select a language.
WELCOME!
Thank you for choosing LG
Language
한국어
Deutsch
English
Español
Ελληνικά
Français
Italiano
Polski
Português
Português (Brasil)
Svenska
Русский
Turkçe
中文
繁體中文
Confirm
4 Select an input signal by using the INPUT button on the remote control.
Input List
AV
Component
ꔂ Move ꔉ OK
SCREEN SHARE
USB
RGB-PC
Input Label
HDMI
Exit
23
24
USING THE PROJECTOR
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen
properly.
To adjust the focus of the image, rotate the focus ring.
Focus Ring
Watching Projector
1 In standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while watching projector.
Button
VOL -, +
MUTE
Q.MENU
RATIO
Key's ,
Description
Adjusts the volume level.
Mutes all sounds.
Accesses the quick menu. (see page 27.)
Resizes an image.
Adjusts Keystone. (see page 25.)
4 To turn the projector off, press the POWER button.
USING THE PROJECTOR
Additional Options
Adjusting Aspect Ratio
yy Resize an image to view at its optimal
size by pressing RATIO while you are
using the projector.
NOTE
yy Available picture size may differ
depending on the input signal.
yy You can also use the Q.MENU or
SETTINGS button.
Menu
16:9
Description
Resizes images to the 16:9
ratio.
Full
Changes to the full screen
regardless of the aspect
ratio.
Just
Displays video images in
Scan
the original size without
removing parts of the edge
of the image.
yy If you select Just Scan,
you may see image
noises at the edge or
edges of the screen.
Set By
Displays images in the
Program same aspect ratio as the
original image.
4:3
Resizes images to the
previous standard 4:3.
Zoom
Resizes the image to fit the
screen width. The top and
bottom parts of the image
may be cut off.
Press the or button to
zoom in or out of the image.
Press the or button to
move the image.
Menu
Cinema
Zoom 1
25
Description
Formats an image to the
cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
Press the or button to
zoom in or out of the image.
Press the or button to
move the image.
yy If you enlarge or reduce
an image, the image may
be distorted.
Using the Keystone
Function
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set up at a right
angle to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
• Keystone
0 ◀
-
+ ▶
OK
1 Press the Key's
or Key's
button to adjust the picture.
yy Keystone can be adjusted from -40
to 40.
2 Press the OK button when done.
26
USING THE PROJECTOR
Changing input device
Selecting an Input Label
Displays which devices are connected to
which input ports.
To select an external input
Selects external input.
Input Label
yy Press the INPUT button on the
remote control to display the input
selection screen.
- Connected inputs are displayed
first. However, AV / Component /
SCREEN SHARE input is always
activated.
yy Select an input signal using the
remote control's INPUT button to
connect the projector to the desired
input. You can use the , , , or
button to switch between all the input
modes.
Input List
AV
Component
ꔂ Move ꔉ OK
SCREEN SHARE
USB
RGB-PC
Input Label
HDMI
Exit
◀
▶
Component ◀
▶
RGB-PC
◀
▶
HDMI
◀
▶
AV
Close
1 Press the INPUT button on the
remote control to display the input
selection screen.
2 Press the red button.
3 Use the or button to scroll to
one of the input sources.
4 User the
or button to select one
of the input labels.
USING THE PROJECTOR
Blank Function
Using the Blank Function
This function may be effective when you
need to draw attention during a meeting
or training.
1 Press the BLANK button, and the
screen is covered by the background
color.
You can change the background color
by referring to Selecting a Blank
Image.
2 Press any button to clear the blank
function.
To cover the screen temporarily,
press the BLANK button on the
remote control.
Do not block the lens with any object
while the projector is running.
It may become overheated and
deformed or even cause a fire.
Selecting a Blank Image
1 Press the SETTINGS button.
2 Press the , , , or button to
select OPTION 2 and press the OK
button.
3 Press the
, button to select
Blank Image and press the OK
button.
4 Use the
or button to move to the
setting or option you want and press
the OK button.
27
Using the Quick Menu
You can customize frequently used menus.
1 Press the Q.MENU button.
2 Press the or button to select a
menu and press OK.
Menu
Aspect
Ratio
PJT
Mode
Picture
Mode
Sound
Mode
Sleep
Timer
Clear
Voice II
Energy
Saving
USB
Device
Description
Resizes the picture.
Turns the projected image
upside down or flips it
horizontally.
Changes the picture mode.
Sets the sound mode.
Sets the projector to be
turned off at the specified
time.
Makes the voice from the
projector crisp and clear.
Adjusts the brightness.
Allows you to remove a
connected USB device in a
safe manner.
(The menu is displayed
only when the USB device
is connected.)
3 Press the
, button to scroll
through the following menus.
28
ENTERTAINMENT
ENTERTAINMENT
Using SCREEN SHARE
1 Set the external input of the projector to SCREEN SHARE.
2 Enable related SCREEN SHARE function on the device you wish to connect.
3 Connect the Projector from the search list on the device you wish to connect.
(When you connect the projector to your laptop, input the PIN code shown on your
display. The request for a PIN will be shown only at the initial connection.)
4 If the desired device accepts the request, SCREEN SHARE will be started.
CAUTION
yy Windows 7 / 8 / 8.1 are compatible with SCREEN SHARE. However, other versions
of Windows, and some other operating systems, may not be compatible with
SCREEN SHARE.
yy Ice Cream Sandwich, Jellybean, and KitKat versions of LG’s Android devices are
guaranteed to be compatible.
yy When connecting via SCREEN SHARE, place the device close to the projector.
yy The response rate and image quality may vary depending upon the user’s
environment.
yy For more information on the device you want to connect to, refer to its owner’s
manual.
ENTERTAINMENT
Setting Up Bluetooth
on the Projector
This option is used to output sound from
the projector through Bluetooth audio
devices.
yy Press the SETTINGS button on
the remote control, and then set
Bluetooth to On in the WIRELESS
menu.
29
NOTE
yy The devices that can be connected
are as follows: LG BTS1, LG HBS700 , LG HBS- 730 , LG HBS-800
(Models available for purchase may
vary by region.)
yy Products from other manufacturers
may not be compatible.
yy You can use the remote control to
adjust the volume of the connected
device.
yy When connecting devices wirelessly,
if the device connection fails, check
that the device is connected to a
power supply and also check that the
Bluetooth audio device is operating
properly.
yy If Bluetooth is turned on, the
projector will automatically connect to
the last connected Bluetooth device
when the projector powers on. (Be
sure to check that the last connected
Bluetooth device is powered on as
well.)
yy This projector does not support the
LG TV Sound Sync feature. To use
products that support the LG TV
Sound Sync feature, use the general
Bluetooth mode instead of the LG TV
mode.
yy The Bluetooth function is to connect
the product to Bluetooth speakers
or Bluetooth headset. You cannot
connect the product to a mobile phone
through the Bluetooth function.
30
ENTERTAINMENT
Searching for Bluetooth
Devices and Connecting
Go to SETTINGS → WIRELESS →
Search Device to search for nearby
Bluetooth audio devices and then
connect any detected devices to the
projector.
1 Set the Bluetooth device to pairing
mode and then select Search
Device.
yy Select Stop Searching to view the
devices detected so far.
yy If the device has not been detected,
check that the device is powered on
and in pairing mode.
yy The time it takes to search for devices
may vary according to the signal
strength and the number of devices.
WIRELESS
ꔂ Move ꔉ OK
SCREEN SHARE : [PJTR][LG]PW700[0000]
Group
Channel
Bluetooth
: On
Search Device
ꔉ
List of registered devices
AV Sync. Adjust
2 When the search is complete, you
can select a Bluetooth device and
connect to it.
yy You can stop the connection process
immediately by selecting Stop.
yy The time it takes to connect to a
device may vary according to the
signal strength and the number of
devices.
Search Device
List
Search Device
Searching...
Please wait.
List
Search complete
HBS-700
ꔉ
Press OK(ꔉ) to connect the device.
Stop searching
Close
Re-search
3 When a Bluetooth device is
Close
connected, you will hear sound from
the projector through the connected
device.
yy The connected Bluetooth device will
be added automatically to the List of
registered devices. Once registered,
Bluetooth devices can be connected
simply by selecting them from the
List of registered devices without
having to search for them.
yy Connected devices can only be
disconnected from SETTINGS →
WIRELESS → List of registered
devices.
ENTERTAINMENT
Connecting,
Disconnecting, or
Deleting Bluetooth
Devices in the List of
registered devices
In SETTINGS → WIRELESS → List of
registered devices, Bluetooth devices
are shown in the order that they were
connected, and the same devices can
be reconnected simply by selecting them
without having to search for them again.
List of registered devices
List
HBS-700
ꔉ
31
Disconnecting
Select Disconnect to disconnect the
device.
yy You can only disconnect a device
from the List of registered devices.
Deleting
Select Delete Marked or Delete All to
delete any registered devices.
yy Delete Marked: Press the red button
in List of registered devices to
delete the selected device.
yy Delete All: Select Delete All in List
of registered devices to delete all of
the registered devices.
Adjusting AV Sync. Adjust
Press OK(ꔉ) to connect the device.
Delete All
Delete
Close
Connecting
Select a Bluetooth device from the List
of registered devices to connect to it.
yy The registered Bluetooth device will
attempt to connect automatically
depending on the characteristics of
the device. (Refer to the manual for
the Bluetooth device.)
yy You can stop the connection process
immediately by selecting Stop.
yy The time it takes to connect to a
device may vary according to the
signal strength and the number of
devices.
When a Bluetooth device is connected,
go to SETTINGS → WIRELESS
→ AV Sync. Adjust to adjust the
synchronization between the video and
the Bluetooth headset sound.
• AV Sync. Adjust 10 ◀
▶
OK
yy This feature is only available when a
Bluetooth device is connected.
yy Audio sync may vary by manufacturer.
yy When playing video from a connected
USB drive, AV Sync. Adjust can also
be adjusted using the Set Audio.
menu.
32
MY MEDIA
MY MEDIA
Removing a USB Device
Before Using
1 Click the Q.MENU button.
2 Use the or button to move
Connecting a USB Device
3 Select a USB to remove. Wait for
Connect a USB device (external HDD,
USB memory) to the USB port of
projector to enjoy the content files stored
in the USB device with your projector.
You cannot write or delete data in the
USB device. Connect a USB flash drive
as shown below.
USB Flash Drive
to USB Device and press the OK
button.
confirmation that the USB device has
stopped before removing the USB.
NOTE
yy If detached early, an error may
occur on the projector or the USB
storage device.
yy Once a USB device has been
selected for removal, it can no longer
be read. Remove the USB storage
device and then re-connect it.
MY MEDIA
Tips for Using a USB Device
yy If the USB storage device has a builtin auto recognition program or uses
its own driver, it may not work.
yy Some USB storage devices may not
work or may work incorrectly.
yy If you use a USB extension cable, the
USB device may not be recognized or
may not work properly.
yy Use only USB storage devices
formatted with the Windows FAT32 or
NTFS file system.
yy For external USB HDDs, it is
recommended that you use devices
with a rated voltage of less than 5 V
and a rated current of less than
500 mA.
yy It is recommended to use a USB
hub or hard disk drive with power
supplied. (If the power supplied is not
enough, the USB storage device may
not be detected properly.)
yy It is recommended that you use USB
flash drives of 32 GB or less and USB
HDDs of 1 TB or less.
yy If a USB HDD with power-saving
function does not work properly,
turn the power off and on. For more
information, refer to the user manual
of the USB HDD.
yy Data in USB storage device can
be damaged so be sure to back
up important files to other devices.
Data maintenance is the user's
responsibility and the manufacturer is
not responsible for data loss.
33
34
MY MEDIA
To Use My Media
1 Press the SETTINGS button on the
remote control.
2Select MY MEDIA.
Select desired file from the list. Watch
the chosen file.
Sets play related settings by checking
option during disk playback.
My Media supporting file
yy Maximum data transfer rate: 20 Mbps
(Mega bit per second)
yy External supported subtitle formats:
*.smi, *.srt, *.sub (MicroDVD,
SubViewer 1.0/2.0), *.ass, *.ssa, *.txt
(TMPlayer), *.psb (PowerDivX)
yy Internal supported subtitle formats:
SRT/ASS/SSA (Supports internal
subtitles generated from DivX6)
MY MEDIA
35
Video Supported Codec
Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640x480 @ 30p)
Extension
.asf,
.wmv
.divx,
.avi
.mp4,
.m4v,
.mov
.mkv
.ts,
.trp,
.tp,
.mts,
.m2ts
.vob
.mpg
Codec
Video
VC-1 Advanced Profile, VC-1 Simple and Main Profiles
Audio
WMA Standard, WMA 9 Professional
Video
DivX3.11, DivX4, DivX5, DivX6, XVID, H.264/AVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital
Video
H.264 / AVC, MPEG-4 Part 2
Audio
AAC
Video
H.264 / AVC
Audio
HE-AAC, Dolby Digital
Video
H.264 / AVC, MPEG-2, VC-1
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby
Digital, Dolby Digital Plus, AAC
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Video
MPEG-1
Audio
MPEG-1 Layer I, II
36
MY MEDIA
Audio File
File type
MP3
AC3
MPEG
AAC,
HEAAC
CDDA
LPCM
Item
Info
Bit rate
32 kbps ~ 320 kbps
Sampling rate
32 kHz ~ 48 kHz
Bit rate
32 kbps ~ 640 kbps
Sampling rate
32 kHz, 44.1 kHz, 48 kHz
Bit rate
32 kbps ~ 448 kbps
Sampling rate
32 kHz ~ 48 kHz
Bit rate
24 kbps ~ 3844 kbps
Sampling rate
8 kHz ~ 96 kHz
Bit rate
1.44 kbps
Sampling rate
44.1 kHz
Bit rate
1.41 Mbps ~ 9.6 Mbps
Sampling rate
Multi-channel : 44.1 kHz, 88.2 kHz / 48 kHz,
96 kHz
Stereo : 176.4 kHz, 192 kHz
MY MEDIA
Watching the Videos
In the Movie List, you can watch movies
stored on the connected USB device.
Controls playback and sets options while
viewing videos.
Tips for Playing Video Files
yy Some subtitles created by users may
not work properly.
yy The video and subtitle files should
be placed in the same folder. For
subtitles to display correctly, the video
and subtitle files must have the same
name.
yy We do not support any stream
that contains GMC (Global Motion
Compensation) or Qpel (Quarterpel
Motion Estimation).
yy Only H.264 / AVC profile level 4.1 and
lower is supported.
yy Video files that exceed 50 GB
(gigabyte) are not supported
for playback. The file size limit
is dependent on the encoding
environment.
yy DTS audio codec is not supported.
37
38
MY MEDIA
5 Control playback by using the
Browsing Movie List
Play a video file stored in the connected
device.
following buttons.
1 Connect a USB storage device.
2 Press the USB button.
3 Use the or button to select
Movie List and press the OK button.
��
4 Use the
, , , or button to
select the file you want and press the
OK button.
Page 1/1
Movie List
USB STORAGE DEVICE
book
doc
pic
꘧ Page Change
vid
Page 1/1
Butterfly_...
01:34:33
ꔅ Go to root folder
Go to upper folder
Exit
Description
Thumbnails
Abnormal file
File not supported
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Moves to the upper level folder.
Exit Movie List.
00:40:30 / 02:30:25
Q.MENU
Setting
Option
Hide
Exit
Description
Shows the current playing
position. Use ,
buttons
to move forward or backward.
Stops playing and returns to
Movie List.
Returns to normal playback.
Pauses the media player.
If no button is pressed on the
remote control for 10 minutes
after pausing, the playback is
restarted.
Displays in slow motion.
Whenever this button is
pressed, the playback speed
is changed.
x2, x4, x8, x16, x32
You can use the Energy
Saving mode.
Option A pop-up window will appear.
Hide Hides the playback bar.
Press the OK button to make
it appear.
Exit Returns to the Movie List
screen.
MY MEDIA
Options for Movie List
1 Press the Q.MENU button.
2 Use the or button to move to
a desired option and press the OK
button.
3 Use the
, ,
up each item.
, or
Setting
Subtitle
Language
button to set
Set Video Play.
Setting
Picture
Size
Audio
Language
Description
Selects the size of a
playback screen.
yy Full : Files are played
in full screen mode
according to the aspect
ratio of video.
y
y Original : Displays the
video in the original size.
Allows you to select the
language you want for
the file with multiple audio
tracks. This option is not
available if the file has only
one audio track.
Repeat
39
Description
The subtitle can be turned
on or off.
yy Language : One of any of
the available languages
can be selected.
yy Code Page : A character
set used for a subtitle
can be selected.
By default, the subtitle is
displayed in a language
configured in OPTION 1
Language.
-S
ync : If a subtitle
is not synchronized
with its video, you can
adjust its speed at 0.5
seconds unit.
-P
osition : Moves the
location of a subtitle.
-S
ize : Changes the
subtitle font size.
Turns the repeat function
On or Off.
When it is set to off, the
next file can be played
sequentially if the file name
is similar.
40
MY MEDIA
Subtitle Language
Subtitle
LanLanguage
guage
Latin1
English, Spanish, French,
German, Italian, Swedish,
Finnish, Dutch, Portuguese,
Danish, Romanian,
Norwegian, Albanian,
Gaelic, Welsh, Irish,
Catalan, Valencian
Latin2
Bosnian, Polish, Croatian,
Czech, Slovak, Slovenian,
Serbian, Hungarian
Latin4
Estonian, Latvian,
Lithuanian
Cyrillic Bulgarian, Macedonian,
Russian, Ukranian, Kazakh
Greek
Greek
Turkish Turkish
Hebrew Modern Hebrew
Chinese Simplified Chinese
Korean Korean
Arabic Arabic
Set Video.
You can change video settings.
(Refer to PICTURE Settings on page 56.)
Set Audio.
You can change audio settings.
(Refer to AUDIO Settings on page 61.)
MY MEDIA
Registering the DivX code
Checks DivX Reg. Code for replaying
DivX protected videos. Register at
http://vod.divx.com.
Use Reg. Code to rent or purchase
movies at www.divx.com/vod.
1 In the Settings menu, move to
OPTION 1 and press DivX(R) VOD.
41
To deregister the DivX code
Use the DivX deregistration code to
deactivate the DivX DRM function.
1 In the Settings menu, move to
OPTION 1 and press DivX(R) VOD.
2 Use the
or button to go to
Deregistration and press the OK
button.
Registration
Registration
Deregistration
Deregistration
Close
Close
2 Press the
or button to move
to Registration and press the OK
button.
You must register your device to
play DivX(R) protected videos.
Registration code: XXXXXXXXXX
Register at http://vod.divx.com
Your device is already registered.
Are you sure you wish to deregister?
Yes
No
OK
3 Check the DivX Registration code.
NOTE
yy Rented/purchased DivX files cannot
be played if the DivX Registration
Code of a different device is used.
Use only the DivX Registration Code
granted to this specific device.
yy Converted files not conforming to the
DivX Codec Standard may not play or
may produce abnormal sound.
Deregistration code : ********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
3Select Yes.
NOTE
yy What is DRM
[Digital Rights Management]?
This is a technology and service that
prevents the illegal use of digital
contents to protect the benefits and
rights of the copyright owner. Files can
be played after the license is verified
through an online method, etc.
42
MY MEDIA
Viewing the Photos
You can view photos stored on a
connected device.
Supported Photo Files
PHOTO (*.JPEG)
Baseline: 64-pixel (width) x 64-pixel
(height) - 15360-pixel (width) x
8640-pixel (height)
Progressive: 64-pixel (width) x 64-pixel
(height) - 1920-pixel (width) x 1440-pixel
(height)
yy Only JPEG files are supported.
yy Non-supported files are displayed in
the form of an icon.
yy An error message is displayed for
corrupted files or file formats that
cannot be played.
yy Corrupted files may not be displayed
properly.
yy It may take some time to view highresolution images in full screen.
Browsing Photo List
1 Connect a USB storage device.
2 Press the USB button.
3 Use the or button to select
Photo List and press the OK button.
4 Use the
, , , or button to
select the file you want and press the
OK button.
❶
❷
❸
Photo List
USB STORAGE DEVICE
book
doc
pic
❺
❹
Page 1/1
꘧ Page Change
vid
Page 1/1
Butterfly_...
06/09/2010
ꔅ Go to root folder
❻
Go to upper folder
❼
Exit
❽
Description
Thumbnails
Abnormal file
File not supported
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Moves to the upper level folder.
Exit
MY MEDIA
5 Control playback by using the
following buttons.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
[1/4]
Slideshow
BGM
Setting
ꔦ
Q.MENU
Option
Hide
Exit
Description
Selects the previous or next
photo.
Slide- All photos are displayed
show during slide show.
yy Set Slide Speed in the
Option → Set Photo
View. menu.
BGM You can listen to music while
viewing photos in full size.
yy Set BGM in the Option →
Set Photo View. menu.
Rotates photos.
yy Rotates a photo 90°, 180°,
270°, or 360° clockwise.
yy Photos cannot be rotated
if their width is greater
than the height of the max.
supported resolution.
Views the photo in full mode
or original mode.
Press the blue button to
enlarge the image.
You can use the Energy
Saving mode.
Option A pop-up window will appear.
Setting
Description
Hide Hides the menu on the full
size screen.
yy To see the menu, press
the OK button on the
remote control.
Exit Exit from full screen photo
view.
43
44
MY MEDIA
Options for Photo List
1 Press the Q.MENU button.
2 Use the or button to move to
a desired option and press the OK
button.
3 Use
, ,
each item.
, or
button to set up
Set Photo View.
Setting
Slide
Speed
BGM
(Background
Music)
Description
Selects a slideshow speed.
Selects a music folder for
the background music.
yy You cannot change the
music folder while the
background music is
playing.
yy For background music,
only the folder from the
same device can be
selected.
-R
epeat : Selects repeat
play.
-R
andom : Selects
random play.
Set Video.
You can change video settings.
(Refer to PICTURE Settings on page 56.)
Set Audio.
You can change audio settings.
(Refer to AUDIO Settings on page 61.)
45
MY MEDIA
Listening to Music
You can play audio files stored on the
connected device.
Supported Music Files
*.MP3
Bit rate range 32 Kbps - 320 Kbps
yy Sampling rate MPEG1 Layer3:
32 kHz, 44.1 kHz, 48 kHz
yy Sampling rate MPEG2 Layer3:
16 kHz, 22.05 kHz, 24 kHz
Browsing Music List
1 Connect a USB storage device.
2 Press the USB button.
3 Use the or button to select
Music List and press the OK button.
4 Use the
, , , or button to
select the file you want and press the
OK button.
❶
❷
❸
Music List
USB STORAGE DEVICE
❺
❹
Page 1/1
꘧ Page Change
Drive1
Page 1/1
Butterfly_...
00:03:25
ꔅ Go to root folder
❻
Go to upper folder
❼
Exit
❽
Description
Thumbnails
Abnormal file
File not supported
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Moves to the upper level folder.
Exit
46
MY MEDIA
5 Control playback by using the
Options for Music List
following buttons.
Page 1/1
Music List
USB STORAGE DEVICE
Drive1
꘧ Page Change
Page 1/1
Butterfly_...
00:03:25
1 Press the Q.MENU button.
2 Use the or button to move to
a desired option and press the OK
button.
3 Use
, ,
each item.
002. - B02.mp3
�
��
Q.MENU
Setting
02:30 / 03:25
Option
Hide
Exit
Description
Changes the playing position.
Stops playing.
Returns to normal playback.
Pauses the media player.
Plays the previous/next file.
You can use the Energy
Saving mode.
Option Sets up the options of Music
List.
Hide Hides the playback bar.
yy Press the OK button to
make the playback bar
appear.
Exit Returns to the Music List
screen.
, or
button to set up
Set Audio Play.
Setting
Description
Repeat Selects repeat play.
Random Selects random play.
Set Audio.
You can change audio settings.
(Refer to AUDIO Settings on page 61.)
47
MY MEDIA
Viewing Files
You can see document files stored on a
connected device.
Supported File Formats
XLS, XLSX, DOC, DOCX, PPT, PPTX,
TXT, PDF
Microsoft Office
97/2000/2002/2003/2007 version
Adobe PDF 1.0/1.1/1.2/1.3/ 1.4 version
yy File Viewer realigns a document,
so it may look different from what is
displayed on a PC.
yy For documents that include images,
the resolution may look lower during
the realigning process.
yy If the document is large or has many
pages, it may take longer to load.
yy Unsupported fonts may be replaced
by other fonts.
yy The file viewer may not open for
Office documents that contain many
high resolution images. In that case,
reduce the image file size, save it on
a USB storage device and run the
file viewer again or connect your PC
to the projector and open the file on
your PC.
Browsing File List
1 Connect a USB storage device.
2 Press the USB button.
3 Use the or button to select File
List and press the OK button.
4 Use the
, , , or button to
select the file you want and press the
OK button.
❶
❷
File List
USB STORAGE DEVICE
DOC
HWP
Butterfly_...
❹
❸
Page 1/1
꘧ Page Change
Drive1
Page 1/1
PDF
06/09/2010
PPT
TXT
ꔅ Go to root folder
❺
XLS
Go to upper folder
❻
Exit
❼
Description
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Moves to the upper level folder.
Exit
48
MY MEDIA
5 Control playback by using the
Options for File List
following buttons.
yy Click Go Page then the pop-up
window for selecting the number
of page appears. Input the page to
move to the page you want.
yy Press the VOL +, - button to zoom in
or zoom out.
1. Press OK.
2. Press the Up/Down/Left/Right
buttons to move to Go Page or
Zoom.
Go Page
ꔦ Zoom
Q.MENU
Option
Hide
Exit
Setting
Description
Go
Moves to the page you want.
Page
Use the Up/Down/Left/Right
buttons to select a page and
press the OK button.
Zoom Enlarges or reduces the
document.
Option Sets up the options of File
Viewer.
Hide
Hides the menu.
yy Press the OK button to
make it appear.
Exit
Returns to the File Viewer
screen.
1 Press the Q.MENU button.
2 Use , , , or button to set up
each item.
Set FileViewer Option
Setting
Description
Single
On Loads and displays
Page
pages one by one.
Loading
The initial loading time
is short but a content
heavy page may be
displayed slowly.
Off Loads all pages of a
file to memory before it
starts to display them.
The initial loading
time is long but you
can navigate pages
quickly after loading is
complete.
If a file is too large, it
may fail to load all the
pages.
Image
You can set the quality of
Quality the image included in the
document. The following
three options are available
for the image quality: High,
Medium, Low. Higher the
image quality, lower the
display time.
DocuSelects initial document
ment
align method.
Align
File View settings are default, so close
the currently opened document to apply
changes to the new document, if any.
3D FUNCTION
49
3D FUNCTION
3D technology uses different video frames for each eye to add depth to the video.
While Watching 3D
WARNING
yy If you view 3D video or images too
closely for a long period of time, your
eyesight may become worse.
yy If you watch the projector or game
screen for a long time with 3D glasses
on, you may experience dizziness or
eye fatigue.
yy People with chronic diseases
(epilepsy, cardiovascular disease,
blood pressure-related diseases,
etc.), pregnant women, and people
with serious motion sickness should
avoid watching 3D video.
yy People with stereo blindness, or with
stereopsis problems, should also
avoid watching 3D video content. It
may cause double vision or visual
discomfort.
yy People with strabismus, amblyopia,
or astigmatism may have difficulty
perceiving video depth and may be
fatigued easily due to double vision
or other ailments. It is recommended
to rest more frequently than other
viewers.
yy Because 3D can be recognized as
real, some viewers may get surprised
or overexcited.
yy Do not watch 3D images near fragile
objects or any objects that can be
knocked over easily.
yy Take care not to injure yourself as
you may subconsciously try to move
away from the life-like 3D images.
50
3D FUNCTION
yy Warning about photosensitivity
seizures
- Some users may experience a
seizure or other abnormal symptoms
when they are exposed to a flashing
light or particular patterns from a
video game. If anyone in your family
has a history of epilepsy or has ever
experienced any kind of seizure,
please consult your doctor before
viewing 3D images.
If you experience one of the following
symptoms while watching a 3D
video, stop watching the 3D video
immediately and take a rest.
- Dizziness, switched eyesight,
twitching of the eye or facial
muscles, involuntary movements,
cramp, loss of consciousness,
confusion, loss of sense of direction,
or nausea. If the symptom does
not disappear, please consult your
doctor.
yy You can reduce the risk of
photosensitive seizures by taking the
following preventive measures.
- Take a rest of 5 - 15 mins. for every
1 hour of viewing.
- If vision varies between each eye,
correct the variation before beginning
to watch a 3D video.
- Ensure that the 3D video is directly in
front of you, at eye level.
- You should stop watching if you
experience a headache, fatigue or
dizziness.
- Do not view 3D images for a long
period of time when you are tired or ill.
CAUTION
yy Extra special care is required for
children watching a 3D video.
When Watching 3D Video
yy Prevent children of 5 years or
younger from watching a 3D video. It
may impair the development of their
eyes.
yy Children 10 years old or younger are
still developing their eyesight and may
have an excessive tendency to touch
or jump at the screen. Adult guidance
and supervision is recommended.
yy Since the distance between the eyes
is narrower for children than in adults,
children tend to notice a greater
difference in the images seen by each
eye. Therefore, even while watching
the same 3D video, children may
have a greater depth perception than
adults.
yy Young people of 19 years old or
younger may respond with sensitivity
to the light stimuli of 3D content.
Excessive viewing when fatigued is
not recommended.
yy Elderly viewers may have a reduced
depth perception than younger
viewers. Avoid watching video nearer
than the recommended distance.
yy Watch 3D images within the optimum
viewing angle and distance.
yy If you are outside the viewing angle
or distance, you may not be able to
see 3D images. You cannot view 3D
images when you are lying down.
3D FUNCTION
yy You may see left and right images
overlapped during projector
initialization after it is powered on. It
may take some time for optimization.
yy It may take some time for the 3D
image to look normal after you turn
your eyes away from the screen and
look back at the 3D image.
yy It may flicker slightly while watching
3D images under a 3 wavelength
lamp fluorescent light (50 Hz 60 Hz) or near windows. If so, it is
recommended to block the sun light
with a curtain and to dim the lights.
yy The 3D glasses must be DLP-LINK
(DLP Ready) type.
yy You may not be able to watch 3D
properly if there is an obstacle
between the projector and 3D
glasses.
yy Install the 3D projector as far as
possible from other devices.
yy If a future 3D broadcasting format
that is not supported by this projector
becomes the standard, an additional
device such as a set-top box may be
required.
51
Please check the following when
using 3D glasses.
yy Do not use 3D glasses as ordinary
glasses, sunglasses or protective
goggles.
- If you do so, this may cause injury.
yy Do not store 3D glasses in very hot
or very cold conditions. If you do, this
may cause them to become distorted.
Do not use distorted glasses.
yy Do not drop 3D glasses or allow
them to come into contact with other
objects.
- This may cause product malfunction.
yy The lenses of 3D glasses are easily
scratched. Use a soft clean cloth
when cleaning them.
yy Foreign particles on the cloth may
cause scratches.
yy Do not scratch the surface of the 3D
glasses' lenses with sharp objects
or wipe them with chemicals. If the
lenses get scratched, images may not
look normal when viewing 3D.
52
3D FUNCTION
Requirements for Watching 3D Images
* Optimum viewing angle: Top/Bottom/Left/Right 9°
Recommended viewing distance: 3 m - 5 m
Recommended screen size: 101 cm
* Watching 3D videos should be done in dark room environments only.
NOTE
yy The pairing with the DLP-LINK glasses is affected by the intensity of light reflected
from the screen.
Therefore, the pairing with DLP-LINK glasses may not work properly if the light
reflected from the screen is not bright enough, such as when the surrounding area
is bright, the screen is big, or the maximum energy saving mode is enabled.
yy Some menus may not work while playing a 3D video.
yy You can only watch a 3D video properly when the 3D video format option has been
selected on the projector.
3D FUNCTION
53
1 Please check the minimum system requirements for your computer. Minimum
requirements are as follows:
Microsoft® Windows® XP, Vista 32/64 bit ,Windows 7 32/64 bit
Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher
More than 1 GB of system memory (2 GB recommended)
Free space of 100 MB or more
DirectX 9 or higher
Video card should support 120 vertical frequency (Hz).
Recommended video card requirements
- Graphic Processor speed 700 MHz higher
- Memory 512 MB higher
yy A laptop equipped with the chipsets above can be used but it may not work properly.
2 Set the video output to XGA 120 Hz and play a video file using a video player that
supports 3D output.
The following video players support 3D output: Stereoscopic Player, nVidia 3D
Vision, and TriDef 3D.
For more information on the players above, please visit their websites at:
www.3dtv.at
www.nvidia.com
www.tridef.com
54
3D FUNCTION
To Use DLP-LINK (DLP-Ready) Type Glasses
1 While watching 3D images from the projector, press buttons on the glasses.
2When you press the button, the glasses flicker to be synchronized with the 3D
images.
(The flickering is a unique operation method of DLP-LINK type glasses. It may be
different depending on the glasses type.)
3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to
make the room darker. Contact your projector seller for queries about the glasses.
Supported 3D input formats
Input
Signal Resolution
Vertical
Frequency
(Hz)
Supported 3D Formats
HDMI
XGA
1024 x 768
120
Frame Sequential / Frame Alternative
RGB-PC
XGA
1024 x 768
120
Frame Sequential / Frame Alternative
yy The resolution supporting 3D mode is 1024 x 768 for HDMI and RGB input.
yy Some menus may not work in 120 Hz input.
Watching 3D Images
1 Play supported 3D video titles.
2 For RGB-PC, you must press AUTO on the remote control before watching 3D.
3 Press the 3D button.
4 While watching 3D images from the projector, press buttons on the glasses.
5 Press the L/R button to switch the playing direction of an image. Select a screen
with better 3D display quality.
yy If you press the 3D button during viewing, it returns to 2D.
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
SETTINGS
1 Press the SETTINGS button.
2 Use the , , , or button to select the desired item and press the OK button.
3 Use the , , , or button to set up the desired item and press the OK button.
4 Press the EXIT ꕯ button when completed.
Menu
Description
PICTURE
Adjusts the image quality for optimal viewing.
AUDIO
Adjusts the sound quality and volume level.
TIME
Sets time-related settings.
WIRELESS
Wireless-related features.
OPTION 1
Customizes the general settings.
OPTION 2
Customizes the settings related the projector.
INPUT
Selects the desired input source.
MY MEDIA
Accesses photo, music, movie, and document files.
55
56
CUSTOMIZING SETTINGS
PICTURE Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
PICTURE
PICTURE and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
4 Press the EXIT ꕯ button when completed.
ꔂ Move ꔉ OK
yy ꕊ Energy Saving
: Medium
yy Picture Mode
: Standard
yy Contrast 100
yy Brightness 50
yy Sharpness 20
yy Color
55
yy Tint
0
R
G
The available picture settings are described as follows.
Item
Energy
Saving
Picture
Mode
Description
Reduces power consumption by adjusting screen brightness.
Mode
Minimum/
Applies the pre-set Energy Saving mode.
Medium/
Maximum
Selects the picture mode optimized for the viewing environment or the
program.
You can also customize advanced options for each mode.
Mode
Vivid
Maximizes the visual effect of video.
Heightens contrast, brightness and sharpness to display
vivid images.
Standard
Displays images in standard levels of contrast,
brightness and sharpness.
Eco
Displays the optimized images for natural scenery.
Cinema
Optimizes the image for a movie.
Sport
Optimizes the image for sports by emphasizing primary
colors and dynamic actions.
Game
Optimizes the image for playing games on fast-moving
screens.
Expert1/2
Menu for adjusting picture quality that allows experts
and amateurs to enjoy the best Projector viewing.
- Expert mode is for picture tuning professionals to
control and fine-tune using a specific image. For
normal images, the effects may not be dramatic.
CUSTOMIZING SETTINGS
Item
Description
Contrast
Adjusts the difference between bright and dark regions of the screen.
Brightness Adjusts the overall screen brightness.
Sharpness Adjusts the sharpness of the borders between bright and dark.
Horizontal and Vertical Sharpness are available only in Expert1/2.
Color
Adjusts the intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Advanced Customizes the advanced settings.
Control
Picture
Sets optional settings.
Option
Picture
Resets values customized by the user.
Reset
Each picture mode is reset. Select the picture mode you wish to reset.
Aspect
Resizes the picture.
Ratio
Screen
Adjusts the picture quality of RGB-PC input.
(RGB-PC) Option
Resolution
Available resolutions are 768 resolution (1024 x 768/
1280 x 768/ 1360 x 768, 60 Hz) and 1050 resolution
(1400 x 1050/ 1680 x 1050, 60 Hz).
Auto Config. Provides optimized picture quality by automatically
calibrating the mismatch of horizontal width and picture
shake caused by clashes between the internal settings
of the projector and various PC graphic signals.
yy You can also use the AUTO button on the remote
control.
Position
Size
Phase
Reset
Moves the image up/down/left/right.
Changes the screen size.
Makes the picture look clear by removing horizontal
noise.
Restores all the settings to the factory default.
57
58
CUSTOMIZING SETTINGS
Advanced Control
Item
Dynamic
Contrast
Dynamic
Color
Color Gamut
Description
Adjusts contrast and colour to the optimal level according to the
screen’s brightness.
Adjusts colours for more natural-looking colours.
Selects the range of colours that can be expressed.
yy Standard: Displays the original colors of an input signal regardless
of the display features.
yy Wide: Makes use of the display's rich colors.
Skin Color
Skin colour spectrum can be separately set to implement the skin
colour as defined by the user.
Sky Color
Sky colour is set separately.
Grass Color Natural colour spectrum (meadows, hills, etc.) can be separately set.
Gamma
Sets the gradation curve according to the output of the picture signal in
relation to the input signal.
* Depending on input signal or other picture settings, the range of detailed items for
adjustment may differ.
Expert Control
Item
Description
Dynamic
Adjusts contrast and colour to the optimal level according to the
Contrast
screen’s brightness.
Color Gamut Selects the range of colours that can be expressed.
yy Standard: Displays the original colors of an input signal regardless
of the display features.
yy Wide: Makes use of the display's rich colors.
Edge
Enhancer
Color Filter
Shows clearer and distinctive yet natural edges of the video.
Filters a specific colour spectrum in RGB colours to fine-tune colour
saturation and hue accurately.
CUSTOMIZING SETTINGS
59
Item
Description
Color
In Expert mode, you can customize the options of each mode.
Temperature Gamma: Select 1.9, 2.2, or 2.4.
a. Method: 2 Points
- Pattern: Inner, Outer
- Points: Low, High
-R
ed/Green/Blue: Adjustable range -50 ~ +50.
- Apply to all inputs: T
he values of the Color Temperature is
applied to all the input modes.
b. Method: 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit indicating the size
of a video signal and can be set to 0, 5, 10, 15, ... 100.You can finetune for each setting as shown below.
- Luminance: The adjustment range is 50 ~ 500.
- Red/Green/Blue: The adjustment range is -50 ~ +50.
- Apply to all inputs: The values of the Color Temperature is
applied to all the input modes.
Color
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colors. Allows an
Management expert to adjust the tint using a test pattern. Six colors (Red/Green/
System
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colors. You may not see colors change on a normal
picture even after adjustment.
-S
aturation Red/Green/Blue/Yellow/Cyan/Magenta,
Tint Red/Green/Blue/Yellow/Cyan/Magenta,
Luminance Red/Green/Blue/Yellow/Cyan/Magenta:
The adjustment range is -30 ~ +30 each.
* Depending on input signal or other picture settings, the range of detailed items for
adjustment may differ.
60
CUSTOMIZING SETTINGS
Picture Option
Item
Description
Noise
Reduction
Reduces screen noise in the video.
MPEG Noise
Reduction
Eliminates noise generated while creating digital picture signals.
Black Level
Adjusts the brightness or darkness of the screen to suit the black level of
the picture input using the degree of darkness (black level) of the screen.
Real Cinema
Optimizes the screen for movie viewing.
Color
Temperature
Adjusts the overall color of the screen to suit your preference.
Select Warm, Cool, Medium, or Natural.
CUSTOMIZING SETTINGS
61
AUDIO Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select AUDIO
and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
AUDIO
yySound Mode
ꔂ Move ꔉ OK
: Standard
yySound Effect
yyAuto Volume
: Off
4 Press the EXIT ꕯ button when completed.
The available sound settings are described as follows.
Item
Sound Mode
Sound Effect
Auto Volume
Description
Sets the sound mode.
Mode
Standard
Suitable for all types of video.
News/ Music/
Sets audio optimized for a specific genre.
Cinema/ Sport/
Game
The user can select various sound effects.
Mode
Clear Voice II
Makes the voice from the projector crisp and clear.
Virtual
LG’s proprietary audio processing technology
Surround
allows 5 channel-like surround sound from two
speakers.
yy When Clear Voice II is set to on, Virtual
Surround cannot be selected.
Equalizer
Adjusts the volume to a level of your choice using
the Equalizer.
yy Audio-band (100 Hz/ 300 Hz/ 1 kHz/ 3 kHz/
10 kHz) can be adjusted from - 10 to 10.
yy Reset: Resets voice options that the user has
changed.
Balance
Adjusts the balance of the left and right speakers.
Reset
Initialize the applied effect under the Sound Effect
menu.
Automatically adjusts the volume level.
62
CUSTOMIZING SETTINGS
TIME Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select TIME
and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
TIME
ꔂ Move ꔉ OK
yySleep Timer
: Off
yyAuto Off
: 60 min.
yyAutomatic Standby : Off
4 Press the EXIT ꕯ button when completed.
The available time settings are described as follows.
Item
Description
Sleep Timer Turns off the Projector after a preset number of minutes.
To cancel the Sleep Timer, select Off.
Auto Off
If there is no signal, the projector automatically turns off after the preset
time has elapsed.
Automatic Turns off the projector automatically after a set period of time if there is
Standby
no button input on the projector.
CUSTOMIZING SETTINGS
63
WIRELESS Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
WIRELESS
yySCREEN SHARE
WIRELESS and press the OK button.
ꔂ Move ꔉ OK
: [PJTR][LG][0000]
yyGroup
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
yyChannel
yy Bluetooth
: Off
yySearch Device
yyList of registered devices
yyAV Sync. Adjust
4 Press the EXIT ꕯ button when completed.
The available wireless settings are described as follows.
Item
SCREEN
SHARE
Bluetooth
Description
The SCREEN SHARE displays the screen of the connected device.
yy You can check the SCREEN SHARE's ID.
Mode
Group
This is the Group setting for each device supporting the
SCREEN SHARE feature. When the wireless connection
is weak or unstable, adjust the Group setting to correct
the problem.
Channel
You can change the channel used for wireless
connections.
yy Search Channels: Select channel searching methods.
-A
uto: The projector searches for available channels
and automatically selects the least used channel.
- Manual: You can select a channel manually.
yy Channel: This is shown when Search Channels is set
to Manual. It allows you to specify a channel number
to use.
Sound is output through the Bluetooth headset.
First, set Bluetooth to On.
Item
Search
Search for the device to connect to.
Device
List of
Connected devices are saved in the List of registered
registered devices. The saved list of registered devices can be
devices
displayed.
AV Sync. When the video and the sound are not synchronized
Adjust
correctly, you can manually adjust the synchronization.
64
CUSTOMIZING SETTINGS
OPTION 1 Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
OPTION 1
ꔂ Move ꔉ OK
yyLanguage
OPTION 1 and press the OK button.
yy3D Mode
3 Use the
yyAuto Input Search : Off
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
yyDivX(R) VOD
yyInitial Setting
4 Press the EXIT ꕯ button when completed.
The available option 1 settings are described as follows.
Item
Description
Language
Selects a desired Menu Language.
3D Mode
Selects 3D mode.
Auto Input
Search
Automatically searches for and displays the input signal type
when it is received. It is available only with external inputs (RGB,
HDMI, AV, and Component).
DivX(R) VOD
Sets DivX related settings.
Initial Setting
Resets all the projector settings to the factory default.
Do not turn off the power during initialization.
65
CUSTOMIZING SETTINGS
OPTION 2 Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
OPTION 2
ꔂ Move ꔉ OK
yyKeystone
OPTION 2 and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
0
yyAuto Keystone
: On
yyPJT Mode
: Front
yyHigh Altitude
: Off
yyBlank Image
: Blue
yyAuto Power
: Off
-
+
yySelf Diagnosis
4 Press the EXIT ꕯ button when completed.
The available option 2 settings are described as follows.
Item
Description
Keystone
To prevent the screen image from becoming trapezoidal,
Keystone adjusts the top and bottom width of the image if the
projector is not set at a right angle to the screen.
Auto Keystone
Auto Keystone provides a rectangular screen image by
automatically adjusting the Keystone number when there is a
trapezoidal screen image caused by tilting of the projector.
Item
On
Automatically adjusts the Keystone number.
Off
Manually adjusts the Keystone number.
PJT Mode
This function turns the projected image upside down or flips horizontal.
yy Select Rear when projecting from the back of the transparent
screen purchased separately.
yy Select Front Ceiling when installing the product on the ceiling.
yy When PJT Mode is Rear/ Front Ceiling, the left/right of the
speaker changes automatically.
High Altitude
If the projector is used at an altitude higher than 1200 meters,
turn this on.
Otherwise, the projector may overheat or its protection function
may be activated. If this happens, turn the projector off and then
on again after waiting for several minutes.
Blank Image
Selects a background for blank Image.
66
CUSTOMIZING SETTINGS
Item
Auto Power
Description
Makes the projector turn on automatically when the adaptor plug
is inserted.
Item
On
Off
Self Diagnosis
When the AC/DC plug is connected to the
projector, it turns on automatically.
When the AC/DC plug is connected to the
projector, it goes into standby mode.
Troubleshoots functional problems that can arise while using the
product.
CONNECTING DEVICES
67
CONNECTING DEVICES
You can connect various external devices to the projector.
Computer/Notebook
DVD
Video
Digital Device
USB
Game Console
Headphones
Mobile Phone
HDMI - page 68
Component - page 69
Composite (AV) - page 69
RGB - page 71
Memory - page 32
Headphone - page 73
Mobile Phone (MHL/Slimport) - page 74
68
CONNECTING DEVICES
Connecting to HD
Receiver, DVD, VCR
Player, or External
Devices
Connect an HD receiver, DVD, VCR
player, or External Devices to the
projector and select an appropriate input
mode.
HDMI to DVI Connection
Using an HDMI to DVI cable, connect
the projector's
port to the
DVI OUT port.
To output audio, use an audio cable for
connection.
Press the INPUT button on the remote
control to select HDMI.
HDMI Connection
With an HDMI cable, you can enjoy high
quality picture and sound.
Using a HDMI cable, connect the
port of the projector to
the HDMI output port of the device
to connect. Both video and audio are
output at the same time.
Press the INPUT button on the remote
control to select HDMI.
* Optional
Extras
DVI OUT
* Optional
Extras
+'0,
* Optional
Extras
AUDIO OUT
CONNECTING DEVICES
69
AV Connection
Component Connection
Connect the output ports of an external
device and the AV IN ports of the
projector using an AV cable. Press the
INPUT button on the remote control to
select AV.
Check whether cables of the same color
are connected properly.
You can enjoy a video by connecting the
Component port of an external device to
the RGB IN port of the projector. Press
the INPUT button on the remote control
to select Component.
Check whether cables of the same color
are connected properly.
* Optional
Extras
(Video)
* Accessories
3%
$9287
35
/HIW
5LJKW
/HIW
$9287
$8',2287
RED
WHITE
RED
<
RED
* Optional
Extras
(Audio)
BLUE
GREEN
5LJKW
$8',2287
RED
RED
WHITE
RED
BLUE
WHITE
BLUE
GREEN
YELLOW
GREEN
* Optional
Extras
(Video)
RED
WHITE
/HIW
RED
WHITE
YELLOW
YELLOW
$9287
RED
WHITE
YELLOW
* Optional
Extras
* Accessories
(Audio)
5LJKW
$8',2287
70
CONNECTING DEVICES
Connecting a PC
The projector supports Plug & Play. Your
PC will automatically detect the projector
and requires no driver installation.
HDMI Connection
Using an HDMI cable, connect the
port of the projector to the
HDMI output port of your PC. Both video
and audio are output at the same time.
Press the INPUT button on the remote
control to select HDMI.
HDMI to DVI Connection
Using an HDMI to DVI cable, connect
the projector's
port to the
DVI OUT port.
To output audio, use an audio cable for
connection.
Press the INPUT button on the remote
control to select HDMI.
* Optional
Extras
* Optional
Extras
* Optional
Extras
DVI OUT
+'0,
AUDIO OUT
CONNECTING DEVICES
71
RGB Connection
Connect the PC output and the PC video
input port of the projector with the RGB
cable.
For audio signal, connect the PC and
the projector with an optional audio
cable.
Press the INPUT button on the remote
control to select RGB-PC.
* Accessories
* Optional
Extras
* Accessories
RED
WHITE
YELLOW
* Accessories
5*%2873&
RED
WHITE
* Optional
Extras
5*%2873&
$8',2287
$8',2287
You can connect the audio cable
without using a gender as shown in the
illustration above.
72
CONNECTING DEVICES
Connecting a Laptop
You can connect the projector to a
laptop to use various functions.
HDMI Connection
Using an HDMI cable, connect the
port of the projector to the
HDMI output port of your laptop. Both
video and audio are output at the same
time.
Press the INPUT button on the remote
control to select HDMI.
The table below shows examples
of switching the output. For more
information, refer to the External
Output, Connecting to an External
Monitor, or similar sections of the
owner's manual of your computer.
Brand
Switching Output
NEC
Fn + F3
Panasonic
Fn + F3
Toshiba
Fn + F5
IBM
Fn + F7
Sony
Fn + F7
Fujitsu
Fn + F10
LG
Fn + F7
Samsung
Fn + F4
Macintosh Adjust the control panel
to enable mirroring after
start-up.
* Optional
Extras
+'0,
CONNECTING DEVICES
Connecting to
Headphones
You can listen to the audio through a
headphone.
* Optional
Extras
73
74
CONNECTING DEVICES
Using the Mirroring Function of a Mobile Phone
MHL/Slimport Connection
You must use a HDMI adapter to connect your cell phone to the projector and to
output images and sound from your cell phone to the projector.
The compatible HDMI adapters are different, depending upon your cell phone type.
Therefore, purchase an appropriate MHL or Slimport adapter.
(To find out whether your device is MHL/Slimport-certified, please contact your device
manufacturer.)
* Optional Extras
NOTE
port, you can see the
yy When you connect a mobile phone to the
mobile phone screen through a projector.
- This only applies to mobile phones that support MHL/Slimport.
- You can use the remote control for some applications.
yy Disconnect the MHL/Slimport cable from the projector when:
- The MHL/Slimport function is disabled.
- Your mobile device is fully charged in standby mode.
MAINTENANCE
MAINTENANCE
Clean your projector to keep it in optimal
condition.
Cleaning
Cleaning the Lens
If there is any dust or staining on the
lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to
clean the lens.
To remove dust or stains, use an
air spray or apply a small amount of
cleaning agent onto a swab or soft cloth
to lightly rub the lens.
Please be aware that liquid may flow
into the lens if the product is sprayed
directly onto the lens.
Cleaning the Projector
Case
To clean the projector case, first unplug
the power cord.
To remove dust or stains, use only a dry,
lint-free, nonabrasive cloth to polish the
lens.
Do not use alcohol, benzene, thinners,
or other chemicals, which may damage
the case.
75
76
SPECIFICATIONS
SPECIFICATIONS
MODELS
Resolution (Pixel)
Aspect ratio
Panel size (mm)
Projection distance
(Video size)
Ratio of upward
projection
Working range of
the remote control
Video input
AC-DC Adaptor
Audio Output
Height (mm)
Width (mm)
Depth (mm)
Weight ( )
USB Device
Operation
environment
PW700 (PW700-GL)
1280 (Horizontal) × 800 (Vertical)
16:10 (Horizontal:Vertical)
11.623
0.80 m - 3.25 m (63.5 cm - 254.0 cm)
100 %
6m
NTSC M / PAL-B, D, G, H, I / PAL M / PAL N / PAL 60 /
SECAM
19.0 V 
, 3.42 A
1W+1W
41.5 (without foot), 44.8 (with foot)
171.5
116.8
580
5 V, 0.5 A (Max.)
Temperature
Operation
0 °C - 40 °C
Storage
-20 °C - 60 °C
Relative Humidity
Operation
0 % - 80 %
Storage
0 % - 85 %
* Contents in this manual may be changed without prior notice due to upgrade of
product functions.
SPECIFICATIONS
77
Supported Monitor Display
Supported HDMI/DVI-DTV Mode
Horizontal
Resolution Frequency
(kHz)
Horizontal
Vertical
Resolution Frequency Frequency
(kHz)
(Hz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
800 x 600
37.879
60.31
1024 x 768
48.363
97.551
60.00
119.99
1152 x 864
54.348
60.053
1280 x 800
49.68
60
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1400 x 1050
65.317
59.979
1680 x 1050
65.3
60
yy If an invalid signal is input into the
projector, it will not be displayed
properly on the screen or a message
such as No Signal or Invalid Format
will be displayed.
yy The projector supports the DDC1/2B
type as the Plug & Play function
(Auto-recognition of PC monitor).
yy PC synchronization signal
types supported: Separate type
synchronization.
yy In PC mode, 1280x800 is
recommended for the best picture
quality.
720 x 480
31.469
31.5
59.94
60
720 x 576
31.25
50
1280 x 720
37.5
44.96
45
50
59.94
60
1920 x 1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Component port connecting
information
Signal
Component
480i / 576i
o
480p / 576p
o
720p / 1080i
o
1080p
o
(50 Hz / 60 Hz only)
78
SPECIFICATIONS
Open Source Software Information
To obtain the source code under GPL,
LGPL, MPL and other open source
licenses, that is contained in this
product,
please visit http://opensource.lge.com.
In addition to the source code, all
referred license terms, warranty
disclaimers and copyright notices are
available for download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of
media, shipping and handling) upon
email request to opensource@lge.com.
This offer is valid for three (3) years from
the date on which you purchased the
product.
The model and serial number of the projector
are located on the back or on the side of the
projector. Record them below should you ever
need service.
MODEL
SERIAL