Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
BTB2090
Contents
1Important
2
2Notice
3
3 Your Micro System
5
Introduction5
What's in the box
5
Overview of the main unit
6
Overview of the remote control
7
4 Get started
9
Placement9
Prepare FM/DAB+ antenna
9
Prepare the remote control
9
Connect power
9
Set clock
9
Turn on
10
5Play
Play disc
Play from a USB storage device
Play from Bluetooth-enabled devices
Control play (CD/USB mode)
Program tracks
Adjust sound
Display different information
6 Listen to DAB+ radio
11
11
11
11
12
13
13
13
7 Listen to FM radio
16
8 Other features
18
9 Product information
21
10Troubleshooting
23
Tune to FM radio stations
16
Program FM radio stations automatically 16
Program FM radio stations manually
16
Select a preset radio station
16
Show RDS information
16
Select stereo/mono broadcast
17
Use FM menu
17
Use system menu
Set the alarm timer
Set the sleep timer
Play from an external audio device
Listen through the headphone
18
19
19
19
20
Specifications
USB playability information
Supported MP3 disc formats
21
22
22
14
For first-time use
14
Store DAB+ radio stations automatically 14
Store DAB+ radio stations manually
14
Listen to a preset DAB+ radio station 14
Use DAB+ menu
15
Show DAB+ information
15
EN
1
1Important
Warning
•• Never remove the casing of this micro system.
•• Never lubricate any part of this system.
•• Never place this system on other electrical equipment.
•• Never look into the laser beam inside this system.
•• Keep this system away from direct sunlight, naked
flames or heat.
•• Make sure that you always have easy access to the
power cord, plug or adaptor to disconnect the system
from the power.
•
•
•
•
•
•
•
Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
remote control:
• Install all batteries correctly, + and - as
marked on the remote control.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the remote
control is not used for a long time.
Make sure that there is enough free space
around the product for ventilation.
Use only power supplies listed in the user
manual.
The system shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the system (e.g. liquid filled objects, lighted
candles).
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Hearing safety
2
EN
Caution
•• To prevent possible hearing damage, do not listen at
high volume levels for long periods. Set the volume to a
safe level. The louder the volume, the shorter is the safe
listening time.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume
continuously upwards as your hearing
adapts.
• Do not turn up the volume so high that
you can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations.
• Excessive sound pressure from earphones
and headphones can cause hearing loss.
2Notice
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment. Hereby,
WOOX Innovation declares that this product is
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/
EC. You can find the Declaration of Conformity
on www.philips.com/support.
Disposal of your old product and battery
with normal household waste. Correct disposal
of old products and batteries helps prevent
negative consequences for the environment and
human health.
Removing the disposable batteries
To remove the disposable batteries, see battery
installation section.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
This apparatus includes this label:
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2013/56/EU.
This symbol means that the product contains
batteries covered by European Directive
2006/66/EC which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
This is CLASS II apparatus with double
insulation, and no protective earth provided.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
EN
3
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Note
•• The type plate is located on the back of the apparatus.
4
EN
3 Your Micro
System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this micro system, you can:
• enjoy audio from discs, USB devices, and
other external devices
• listen to FM/DAB+ radio
You can enrich sound output with these sound
effects:
• [POWERFUL] (Powerful)
• [BALANCED] (Balanced)
• [WARM] (Warm)
• [BRIGHT] (Bright)
• [CLEAR] (Clear)
What's in the box
Check and identify the contents of your
package:
• Main unit
• Remote control (with battery)
• Power adapter
• Mounting kit (2 dowels and 2 screws)
• Short user manual
• Safety & notice leaflet
• Wall mounting instructions
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
EN
5
Overview of the main unit
ab c
d ef
g
hj
i
klm
on
a
c
• Turn the system on.
• Switch to standby mode.
b SOURCE
• Select a source: CD, USB, FM, DAB+,
FM, BLUETOOTH, or MP3 LINK.
6
EN
•
•
•
•
/
Skip to the previous or next track.
Search within a track or disc.
Tune to radio stations.
Adjust time.
d OK/
• Start or pause play.
• Confirm a selection.
• Switch between mono and stereo
broadcast.
e MENU/
• Access FM/DAB+ menu.
• Stop play or erase a program.
f VOLUME + / • Adjust volume.
g
Overview of the remote
control
a
b
• Open or close the disc compartment.
h Power indicator
• Light up when the micro system in in
ECO standby mode.
i Display panel
• Show play information.
r
c
q
p
d
j Disc compartment
k MP3-LINK
• Connect an external audio device.
l
m
• Connect a USB storage device.
• Headphone socket.
n DC IN
• Connect power.
o FM ANT
• Improve FM/DAB+ radio reception.
o
n
e
m
f
l
g
k
h
j
i
a
b
• Turn the micro system on.
• Switch the system to standby mode.
• Open or close the disc compartment.
c CD/MP3-LINK
• Select CD or MP3 link source.
d
/
• Skip to the previous or next track.
• Search within a track or disc.
EN
7
• Tune to radio stations.
• Adjust time.
e VOL +/• Adjust volume.
f REPEAT/SHUFFLE
• Play a track or all tracks repeatedly.
• Play tracks in current album repeatedly.
• Play tracks randomly.
g MUTE
• Mute or resume sound.
h SOUND
• Select a preset sound setting.
i CLOCK/SCAN
• Set time.
• Scan/store DAB+ radio stations
automatically.
j SLEEP/TIMER
• Set sleep or alarm timer.
k PROG
• Program tracks.
• Program radio stations.
l RDS/DISPLAY
• Show time and play information.
• For FM radio stations with RDS signals:
display RDS information.
m
• Start or pause play.
n MENU/
• Stop play or erase a program.
• Access FM/DAB+ menu.
o
/
• Select a preset radio station.
• Skip to the previous or next album.
p OK
• Confirm a selection.
q DAB/FM
• Select FM source.
• Select DAB source.
8
EN
r BT/USB
• Select Bluetooth source.
• Select USB source.
4 Get started
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Connect power
Always follow the instructions in this chapter in
sequence.
Caution
•• Risk of product damage! Make sure that the power
Placement
You can place the system on a flat surface or
mount it on a wall.
supply voltage corresponds to the voltage printed on
the back of the system.
•• Risk of electric shock! When you unplug the AC power
adapter, always pull the plug from the socket. Never
pull the cord.
•• Before connecting the AC adapter, make sure that you
have completed all other connections.
Mount on a wall
See the wall mounting instructions included in
the package.
Prepare FM/DAB+ antenna
Note
•• The type plate is located on the back of the system.
Connect the power adapter to:
• the DC IN socket on the system.
• the wall outlet.
For better reception, fully extend and adjust the
position of the FM/DAB+ antenna.
Note
•• To prevent interference, position the antenna as far as
possible from TV, VCR, or other radiation source.
Prepare the remote control
1
2
3
Open the battery compartment.
Set clock
Insert 1 AAA batteries with correct
polarity (+/-) as indicated.
1
Close the battery compartment.
2
Press to switch the system to standby
mode.
»» --:-- is displayed.
Press and hold CLOCK/SCAN on the
remote control for two seconds.
EN
9
3
4
5
»» [SET CLOCK] (set clock) scrolls on
the display, and then 12 or 24 hour
format blinks.
Press
/
repeatedly to select the
hour format.
Press CLOCK/SCAN to confirm.
Repeat steps 3-4 to set the hour and
minute respectively.
Note
•• If the system is idle for 10 seconds, it exits clock setting
mode automatically.
Turn on
Press .
»» The system switches to the last
selected source.
Tip
•• To select another source, press SOURCE repeatedly or
the source selection buttons on the remote control.
Switch to standby mode
Press to switch the micro system to standby
mode.
»» The clock (if set) appears on the
display panel.
Switch to ECO Power mode:
• Press and hold for more than three
seconds.
Tip
•• The micro system switches to Eco Power mode after
15 minutes in standby mode.
to switch the micro system to ECO
standby mode if it is in working mode.
•• Press to wake up the micro system from ECO
standby mode.
•• Press and hold
10
EN
Switch between standby mode and Eco Power
mode:
• In standby/Eco Power mode, press and
hold to switch the micro system to Eco
Power/standby mode.
Tip
•• The power indicator lights up red when the micro
system is in Eco Power mode.
5Play
Play disc
1
2
3
4
Press CD/MP3-LINK repeatedly to to
select CD source.
Press
to open the disc compartment.
2
Insert a disc with the printed side facing up.
Press to close the disc compartment.
»» Playback starts automatically after a
few seconds. if not, press
.
Play from a USB storage
device
Press BT/USB repeatedly to select the USB
source.
»» Play starts automatically. If not, press
.
Play from Bluetooth-enabled
devices
Note
•• The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•• Any obstacle between the system and the device can
reduce the operational range.
•• Compatibility with all Bluetooth devices is not
guaranteed.
Note
•• Make sure that the USB device contains playable audio
content.
1
Insert the USB storage device into the
socket.
Philips BTB2090
PIN
0000
EN
11
1
2
3
4
Press SOURCE repeatedly to select the
Bluetooth source.
»» [BLUETOOTH] (BLUETOOTH) is
displayed.
/
On your device, enable Bluetooth and
search for Bluetooth devices that can be
paired (refer to the user manual of the
device).
Select 'Philips BTB2090 on your Bluetooth
enabled device and if necessary input
'0000' as the paring password.
»» After successful pairing and connection,
[BT CONNECTED] (BT connected)
is displayed and the speaker beeps
twice.
Play audio on the connected device.
»» Audio streams from your Bluetooth
enabled device to this unit.
Tip
•• The micro music system can memorize up to 8
previously connected Bluetooth devices.
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device; or
• Move the device beyond the
communication range.
• Press and hold
for 2 seconds.
To clear Bluetooth pairing history:
• Pressand hold on the main set for 7
seconds.
»» The current Bluetooth connection is
disconnected.
»» After successful clearing, beep sounds
12
Control play (CD/USB mode)
EN
/
OK
REPEAT/SHUFFLE
Select an audio file;
Press and hold to fast
forward or fast reverse
the track during playback,
then release to resume
play.
For MP3/WMA tracks,
select an album or folder.
Start or pause play.
Stop play.
Confirm a selection.
]: Play the current
[
track repeatedly.
[
]: (for MP3/WMA
only): Play all tracks in this
album repeatedly.
[
]: Play all tracks
repeatedly.
[
]: Play all tracks
randomly. Press and hold
REPEAT/SHUFFLE to
access shuffle play mode.
To return to normal play,
press REPEAT/SHUFFLE
repeatedly until the
repeat or shuffle icon
disappears.
Program tracks
You can program a maximum of 20 tracks.
1
2
3
4
5
6
In CD or USB mode, press
playback.
to stop
Press PROG to activate the programming
mode.
For MP3/WMA tracks, press /
repeatedly to select an album.
Press
/
repeatedly to select a track,
then press PROG to confirm.
Repeat steps 3-4 to program more tracks.
To play the programmed tracks, press
»» During play, [PROG] (program) is
displayed.
• To erase the program, press
.
twice.
Adjust sound
During play, you can adjust volume and select
different sound effects.
Key
VOL +/MUTE
SOUND
Function
Increase or decrease volume.
Mute or resume sound.
Press to select a sound effect:
[POWERFUL] (Powerful)
[BALANCED] (Balanced)
[WARM] (Warm)
[BRIGHT] (Bright)
[CLEAR] (Clear)
Display different information
During play, press DISPLAY repeatedly to view
time and different play information.
EN
13
6 Listen to DAB+
radio
Store DAB+ radio stations
automatically
Tip
Digital Audio Broadcasting (DAB+) is a way
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality and more
information.
For first-time use
1
2
Press DAB/FM repeatedly to select DAB+
radio.
»» [FULL SCAN] (full scan) is displayed.
Press OK to start full scan.
»» The system stores all DAB+ radio
stations automatically, and then
broadcasts the first available station.
»» The station list is memorized in the
system. When you turn on the system
next time, the station scan does not
take place.
»» If no DAB+ station is found, [No DAB
Station] (no DAB station) is displayed,
then [FULL SCAN] (full scan) is
displayed again.
To tune to a station from the station list:
1
2
In DAB+ mode, press
/
repeatedly
to navigate through the available DAB+
stations.
•• New stations and services will be added in the DAB+
broadcast. To check for newly available DAB+ stations
and services, perform full scan regularly.
In DAB+ mode, press and hold CLOCK/
SCAN for 2 seconds.
»» The system stores all the available
DAB+ radio stations automatically.
»» After full scan, the first available station
is broadcast.
Store DAB+ radio stations
manually
You can store up to 20 DAB+ radio stations.
1
2
3
4
5
Tune to a DAB+ radio station.
Press and hold PROG for 3 seconds to
activate the storing mode.
Press
/
to select a number.
Press PROG to confirm.
Repeat steps 1-4 to store other DAB+
stations.
Note
•• To remove a pre-stored DAB+ radio station, store
another station in its place.
Press OK to confirm the selection.
Listen to a preset DAB+
radio station
In DAB+ mode, press / repeatedly to
select a preset channel number.
14
EN
Use DAB+ menu
1
2
3
4
In DAB+ mode, press MENU//
DAB+ menu.
Show DAB+ information
to access
Press
/
to scroll through the menu
options:
• [STATION LIST] (station list): Tune
to a DAB+ radio station from a list of
available DAB+ stations, or scan DAB+
stations if no station is stored in the list.
• [FULL SCAN] (full scan): Scan and
store all available DAB+ radio stations.
• [MANUAL TUNE] (manual tune):
Tune to a specific channel/frequency
manually.
• [PRUNE] (prune): Remove invalid
stations from the station list.
• [SYSTEM] (system): Adjust system
settings (see ‘Other features - Use
system menu').
While listening to DAB+ radio, press
RDS/DISPLAY repeatedly to scroll through the
following information (if available):
»» Station name
»» Dynamic Label Segment (DLS)
»» Signal strength
»» Program type (PTY)
»» Ensemble Name
»» Frequency
»» Signal error rate
»» Bitrate
»» Codec
»» Time and date
Press OK to select an option.
Repeat steps 2-3 if sub-option is available
under one option.
Note
•• If the system is idle for 10 seconds, the menu exits.
EN
15
7 Listen to FM
radio
Tune to FM radio stations
1
2
Press DAB/FM repeatedly to select FM
tuner mode.
Press and hold
or
for 3 seconds.
»» The system tunes to an FM station
with strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a station with weak signal:
Press
or
repeatedly until you find good
reception.
Program FM radio stations
automatically
Program FM radio stations
manually
1
2
3
4
5
In tuner mode, tune to an FM radio station.
Press PROG to activate programming
mode.
»» [PROG] (program) blinks.
Press or repeatedly to select a
channel number.
Press PROG again to confirm.
Repeat steps 1-4 to store other FM
stations.
Note
•• To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press
radio station.
Note
or
to select a preset
•• You can program a maximum of 20 preset FM radio
stations.
1
2
Show RDS information
In FM tuner mode, press and hold PROG
for 3 seconds.
»» The system stores all the FM radio
stations automatically, and then
broadcasts the first preset radio
station.
Press
/
to select the preset stations.
RDS (Radio Data System) is a service
that allows FM stations to show additional
information.
1
2
Tune to an RDS station.
Press RDS repeatedly to scroll through the
following information (if available):
»» Program service
»» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
»» Radio text message
»» Time
16
EN
Select stereo/mono broadcast
Note
•• Stereo broadcast is the default setting for tuner mode.
•• For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.
Use FM menu
1
2
3
4
In FM mode, press MENU to access FM
menu.
Press
/
repeatedly to scroll the
menu options:
• [SCAN SETTING] (scan setting)
• [AUDIO SETTING] (audio setting)
• [SYSTEM] (see 'Other features - Use
system menu')
Press OK to select an option.
Repeat steps 2-3 if sub-option is available
under one option.
Scan setting
• [Strong stations only] (strong stations
only): Scan FM stations with strong
signals only.
• [All stations] (all stations): Scan all the
available FM radio stations.
Audio setting
• [Stereo allowed] (stereo allowed):
Select stereo broadcast.
• [Forced mono] (forced mono): Select
mono broadcast.
EN
17
8 Other features
Note
•• Power supply must not be interrupted during the
upgrade.
•• The firmware upgrade can only be available through
the mini-USB port.
Use system menu
1
2
In FM/DAB+ mode, when the [System]
(system) menu is displayed, press
/
repeatedly to select an option.
Press OK to confirm the selection.
[Time]
[Factory
Reset]
[Software
Upgrade]
[Auto
update]
[Yes]
[No]
[Yes]
[No]
[SW
version]
Register your product
1
2
3
Reset the system to
factory default status.
Cancel.
Select to update
software.
Cancel.
Display software
version.
6
Firmware upgrade for your micro system
may be available in future. If you register your
product at Philips website (www.philips.com/
support) with a valid email address, you can get
information about software update and product
support.
EN
restored to the factory default status.
Synchronize the clock
with FM or DAB
stations that transmit
time signal.
• [Update from any]
• [Update from DAB]
• [Update from FM]
• [No update]
Upgrade the firmware (if available)
18
•• When the firmware upgrade succeeds, all settings are
4
5
Go to www.philips.com/support.
Click the link of "Register my product"
(the exact wording of this link name may
vary in different languages).
Log in with your account on the prompt
Web page.
• If you do not have a Philips account,
create one first on this Web page.
Search your product with "BTB2090/12" as
the keywords.
Click the link of search result to access the
Web page for registering your product.
Fill in necessary information about this
product to complete the registration.
Perform the upgrade
1
2
3
4
Go to www.philips.com/support.
Log in with your Philips account.
»» Support information about your
registered product is displayed.
Click the link of firmware upgrade file.
Follow the firmware upgrade instructions
to download the upgrade packet and
complete the upgrade.
• If the upgrade fails, reconnect the
power supply, turn on this product, and
perform the upgrade again.
Set the alarm timer
Set the sleep timer
Note
Note
•• Make sure that you have set the clock correctly.
1
2
3
4
5
6
In standby mode, press and hold SLEEP/
TIMER.
»» [TIMER SOURCE] (Timer Source) is
displayed.
Press SOURCE repeatedly or the source
selection buttons on the remote control to
select an alarm source: FM, CD, USB, DAB.
Press SLEEP/TIMER to confirm.
»» The hour digits blink.
Press
or
to set the hour.
Press SLEEP/TIMER to confirm.
»» The minute digits blink.
Repeat steps 4-5 to set the minute and
alarm volume.
•• Make sure that you have set the clock correctly.
•
To deactivate the sleep timer:
• Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.
Play from an external audio
device
With this system, you can play audio from an
external audio device like MP3 player.
1
Tip
•• If the system is idle for 10 seconds, it exits alarm setting
mode automatically.
To activate or deactivate the alarm timer:
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate the alarm.
»» appears when the alarm timer is
activated.
When the system is turned on, press
SLEEP/TIMER repeatedly to select the
sleep timer period (in minutes).
»» If the sleep timer is activated, is
displayed.
2
3
Connect an MP3 link cable to:
• the MP3-LINK socket (3.5mm) on the
system.
• the headphone socket on an external
device.
Press CD/MP3-LINK repeatedly to select
the MP3 link source.
Play the external audio device (see the
user manual of the device).
Tip
•• If CD, USB, or DAB+ radio is selected as alarm source
and the audio cannot be played, FM tuner is activated
automatically when alarm time comes.
MP3-LINK
EN
19
Listen through the headphone
Plug a headphone into the
system.
20
EN
socket on the
9Product
information
Note
•• Product information is subject to change without prior
notice.
Tuner (FM)
FM:
Tuning Range
Tuning Grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Total Harmonic Distortion
Signal to Noise Ratio
87.5 - 108 MHz
50 KHz
<22 dBf
<51.5 dBf
<3%
>55 dBA
DAB:
Specifications
Tuning Range
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
MP3 Link Input
2 x 10 W RMS
125 -16000 Hz,
±3 dB
> 62 dBA
<1%
650 mV RMS
174.92-239.20 MHz
Bluetooth
Bluetooth Version
Bluetooth Frequency
Band
Bluetooth Range
V3.0
2.4 GHz ~ 2.48
GHz ISM Band
10 m (free space)
General information
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
Signal to Noise Ratio
AC Power
Semiconductor
12 cm/8 cm
CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
24 Bits/44.1KHz
<1 %
125 -16000 Hz, ±3 dB
>70 dBA
Operation Power
Consumption
Standby Power
Consumption
ECO Standby Power
Consumption
Dimensions - Main Unit
(W x H x D)
Weight - Main Unit
Model: AS360-120AE250;
Input: 100 -240 V ~,
50/60 Hz, 1.2A;
Output: 12 V 2.5 A
Model: AS300-120AE250;
Input: 100 -240 V ~,
50/60 Hz, 1.1A;
Output: 12 V 2.5 A
15 W
< 1W
< 0.5 W
400 x 235 x 98 mm
2.2 kg
EN
21
USB playability information
Compatible USB devices:
• USB flash memory (USB1.1)
• USB flash players (USB1.1)
• memory cards (requires an additional
card reader to work with this unit)
Supported formats:
• USB or memory file format: FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum of
8 levels
• Number of albums/ folders: maximum
99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 16 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and is not be shown in the
display.
• Unsupported file formats are skipped.
For example, Word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
Supported MP3 disc formats
•
•
•
•
•
22
ISO9660, Joliet
Maximum title number: 999 (depending on
file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
Supported Bit-rates: 32~320 (kbps),
variable bit rates
EN
10Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•• Ensure that the AC power cord of the unit
is connected properly.
•• Ensure that there is power at the AC
outlet.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•• Adjust the volume.
•• Disconnect the headphones.
No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the unit again.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
••
Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
•• Insert a disc.
•• Check if the disc is inserted upside down.
•• Wait until the moisture condensation at
the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•• Increase the distance between the unit and
your TV or VCR.
•• Fully extend the FM antenna.
Timer does not work
•• Set the clock correctly.
•• Switch on the timer.
Clock/timer setting erased
•• Power has been interrupted or the power
cord has been disconnected.
•• Reset the clock/timer.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
•• Insert the battery with its polarities (+/–
signs) aligned as indicated.
•• Replace the battery.
EN
23
Specifications are subject to change without notice.
2014 © WOOX Innovations Limited.
All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used by WOOX
Innovations Limited under license from Koninklijke Philips N.V.
BTB2090_12_UM_V1.0