O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

LYCAN

2.5” SATA Portable Enclosure

User’s Manual

(One Touch Backup = OTB )

 

—

Include

Hardware Installation Guide

Backup4all Software Installation Guide

External Enclosure Driver Installation Guide

HDD Formatting Guide

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

Hardware Installation Guide

STEP1: Pull out the rear panel. You will see the internal structure of the external enclosure.

STEP2:

SATA HDD

：

Connect the HDD to the SATA connector.

Make sure the connector is connected well.

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

STEP3: Insert the HDD and PCB board to the aluminum case.

SATA HDD

STEP4: Screw the back cover firmly to the body case.

1

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

STEP5: Screw the tray and external enclosure together.

2

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

Backup4all Software Installation

1

．

Insert Backup4all CD to the CD-ROM driver.

2

．

Double Click “autorun.exe”

3

．

Please follow the instruction on the pop-up windows for installing the OTB software.

3

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

4

．

Select the language to use during the installation.

5

．

Please follow the instruction to complete the installation.

4

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

6

．

Select folder where Setup will install files (C:\Program Files\Backup4all) then click "Next”.

7

．

Select the languages you want to install.

5

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

8

．

Select the default languages you want to use in Backup4all.

9

．

Finish the installation.

6

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

10

．

Enter the KEY on the CD and click “Register”.

11

．

Finish the installation.

12

．

Double-click “Backup4all” icon on the desk-top. Click “Tools” on the pop-up windows then select “Options”. Check the Enable “One Touch Backup” column.

1

2

7

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

External Enclosure Driver Installation

Windows ME / 2000 / XP / Vista

The system already provides the support for the software

(Please do not install again unless necessary).

Windows 98 /98SE

1

．

Insert driver CD to the CD-ROM drive.

2

．

Double-click “autorun.exe”

3

．

Follow instruction on the pop-up windows for installing the 98 driver.

4

．

Install driver according to your HDD.

8

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

9

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

HDD Formatting Guide

☆

You may format your external HDD through USB2.0 connection.

☆

Please make sure your external HDD is turned on and well connected to the

PC before formatting the HDD.

STEP1:

Right-click “My Computer” icon and select the ”Manage” column.

STEP2:

Select “Disk Management” and you will see your External HDD showed “Unallocated”.

10

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

STEP3:

Right-click on the “Unallocated” block and selects “New Partition”.

STEP4:

The “New Partition Wizard” will appear. Please follow the instruction of the wizard to complete.

11

O T B E x t e r n a l E n c l o s u r e I n s t a l l a t i o n G u i d e

STEP5:

When new partition is completed, the external HDD will be recognized as a “New Volume”.

STEP6:

Double-click “My Computer”. You will see the new volume appears on your PC.

12