Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
User manual
SW700M
1Important2
Safety2
Notice2
2 Your Spotify Multiroom Speaker4
Introduction4
What’s in the box
4
What else you need
4
Overview of the main unit
5
7 Product information20
Specifications
20
8Troubleshooting21
9 Appendix: Understand meanings
of LED colors22
3Prepare6
Download SpeakerSet Multiroom
Manager to your iOS or Android device 6
Connect power and switch on
6
4 Connect SW700M
to your home
Wi-Fi network8
Option 1: Set up through an iOS device 8
Option 2: Set up through an Android
device9
Option 3: Set up wireless connection
to a WPS router directly
10
Option 4: Set up through a PC/Mac
(advanced)11
Rename speakers
12
5Play13
Enjoy Spotify music services through
SW700M13
Stream music to multiple speakers at
the same time
14
6 Other features18
Restore factory settings
Upgrade firmware
18
19
EN
1
English
Contents
1Important
Safety
•
•
•
•
•
Only use attachments/accessories specified
by the manufacturer.
Use only power supplies listed in the user
manual.
The product shall not be exposed to
dripping or splashing.
Do not place any sources of danger on the
product (e.g. liquid filled objects, lighted
candles).
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable. Warning
•• Never remove the casing of this apparatus.
•• Never lubricate any part of this apparatus.
•• Never place this apparatus on other electrical
equipment.
•• Keep this apparatus away from direct sunlight, naked
flames or heat.
•• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
Risk of overheating! Never install this apparatus
in a confined space. Always leave a space of
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
2
EN
Notice
Hereby, WOOX Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC. You can find the
Declaration of Conformity on www.philips.com/
support. Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment. Philips and the Philips’ Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
and are used by WOOX Innovations Limited
under license from Koninklijke Philips N.V. Specifications are subject to change without
notice. WOOX reserves the right to change
products at any time without being obliged to
adjust earlier supplies accordingly.
Disposal of your old product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU. Inform yourself about the local
separate collection system for electrical and
electronic products. Follow local rules and never
dispose of the product with normal household
waste. Correct disposal of old products
helps prevent negative consequences for the
environment and human health. English
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment. Trademark notice
iPad, iPhone, iPod, iPod classic, iPod nano
and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Lightning is a trademark of Apple Inc.
Android is a trademark of Google Inc. Use of
this trademark is subject to Google permissions.
Class II equipment symbol:
CLASS II apparatus with double insulation, and
no protective earth provided. Note
•• The type plate is located on the bottom of the
apparatus.
EN
3
2 Your Spotify
Multiroom
Speaker
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this Spotify Multiroom Speaker, you can:
• stream Spotify music wirelessly via
Spotify Connect with your iOS or
Android device as remote control
• listen to Spotify music everywhere
at your home through group play
(multiple Spotify Multiroom speakers
required)
What’s in the box
Check and identify the contents of your
package:
• Spotify Multiroom Speaker
• 1 x AC power adaptor
• Printed materials
4
EN
What else you need
To stream Spotify music wirelessly to SW700M
through Wi-Fi, you need:
• a certified Wi-Fi router
• an iOS or Android device, such as an
iPod touch/iPhone/iPad or an Android
phone or tablet
• the SpeakerSet and Spotify (with a
premium account) apps available on
Apple App Store (for iOS devices)
or Google Play Store (for Android
devices)
Your SW700M should be connected to the
same local network as your iOS or Android
device through the Wi-Fi router.
English
Overview of the main unit
a b c
d
a
b
e fg
/
• Skip to the previous/next song.
• Start or pause music play.
c +/• Adjust volume.
d System status indicator
• Show the current status of the speaker.
e DC IN
• Connect the power adaptor.
f SETUP button/indicator
• Enter App-Assisted Wi-Fi Setup mode
for connection of the speaker to a
Wi-Fi network.
• Show the Wi-Fi setup status.
g WPS button/indicator
• Enter WPS Setup mode for connection
of the speaker to a Wi-Fi network.
• Show the Wi-Fi setup status in WPS
mode.
EN
5
3Prepare
2
On the initial setup page, tap Setup a new
speaker.
Always follow the instructions in this chapter
in sequence.
Download SpeakerSet
Multiroom Manager to your
iOS or Android device
1
(For iPod touch/iPhone/iPad users) Install
SpeakerSet from Apple App Store, and
then run the app.
Connect power and switch
on
Caution
•• Risk of product damage! Make sure that the power
(For users of Android smartphones or tablets)
Install SpeakerSet from Google Play Store and
then run the app.
supply voltage matches the voltage printed on the
bottom of the speaker.
•• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•• Before you connect the AC adaptor, make sure that you
have completed all the other connections.
•
6
EN
As instructed on the app screen, connect
the AC power adaptor to
• the DC IN socket on the back of the
speaker.
• the wall power socket.
»» The speaker switches on automatically.
English
»» The system status indicator on the
front panel blinks amber during
boot-up.
»» If a Wi-Fi connection has been set
up for the speaker, the system status
indicator turns solid green after
successful connection.
Tip
•• The speaker enters standby mode automatically after
15 minutes of inactivity.
EN
7
4 Connect SW700M
to your home
Wi-Fi network
To connect SW700M to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi settings to SW700M in one of the
following ways (depending on the type of your
smart device and whether your Wi-Fi router is
WPS enabled):
Devices
required for
speaker setup
iOS device +
Wi-Fi router
Android
device +
Wi-Fi router
WPS Wi-Fi
router
PC/Mac with
Wi-Fi enabled
+ Wi-Fi router
Setup method
Choose option 1 (see
'Option 1: Set up through an
iOS device' on page 8).
Choose option 2 (see
'Option 2: Set up through an
Android device' on page 9).
Choose option 3 (see
'Option 3: Set up wireless
connection to a WPS router
directly' on page 10).
Choose option 4 (see
'Option 4: Set up through a
PC/Mac (advanced)' on page 11).
Before connection of SW700M to your home
Wi-Fi network, make sure that:
ayour Wi-Fi router is powered on and
working properly.
bthe speaker has been powered on and
booted up successfully.
c(for option 1, 2 and 4 only) you have
jotted down your Wi-Fi password.
* If your Wi-Fi password contains such special
characters as #/:/;/’, you need to change your
password.
Once connected successfully, SW700M will
remember your home Wi-Fi settings. Whenever
SW700M is powered on, it is connected to your
home Wi-Fi network automatically. Then you can
enjoy Spotify music services via the Spotify app.
8
EN
Option 1: Set up through an
iOS device
1
2
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
As instructed on the app, press and hold
SETUP on the back of SW700M for more
than 3 seconds.
»» Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the SETUP button turns
solid amber.
4
Tap Next on the above app screen, and
then read how to proceed with network
setup.
Select Wireless (WI-FI) under HOW DO
YOU WANT TO CONNECT?.
Option 2: Set up through an
Android device
1
2
5
6
7
8
9
English
3
Before setup, make sure that your Android
device is connected to your home Wi-Fi
network.
As instructed on the app, press and hold
SETUP on the back of SW700M for more
than 3 seconds.
»» Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the SETUP button turns
solid amber.
As instructed, exit the app, and then select
:) Philips Setup from the list of available
Wi-Fi networks.
After automatic detection of the speaker
successfully, open the SpeakerSet app again.
Select the name of your home Wi-Fi
network under Select a network to use
speaker.
Enter the password of your home Wi-Fi
network, and then tap Done to finish
setup.
Wait until successful connection of the
speaker to your home Wi-Fi network.
»» The speaker beeps.
»» The Wi-Fi status indicator on the
SETUP button turns off.
»» The system status indicator on the
front panel turns solid green.
EN
9
3
4
5
6
7
Tap Next on the above app screen, and
then read how to proceed with network
setup.
Select Wireless (WI-FI) under HOW DO
YOU WANT TO CONNECT?.
Select the name of your home Wi-Fi
network under Select a network to use
speaker.
Enter the password of your home Wi-Fi
network, and then tap Done to finish
setup.
1
As instructed on the app, press and hold
WPS on the back of SW700M for more
than 3 seconds.
»» The Wi-Fi status indicator on the WPS
button blinks green.
Wait until successful connection of the
speaker to your home Wi-Fi network.
»» The speaker beeps.
»» The Wi-Fi status indicator on the
SETUP button turns off.
»» The system status indicator on the
front panel turns solid green.
10
Option 3: Set up wireless
connection to a WPS router
directly
EN
WPS
Press the WPS button on your home
Wi-Fi router.
WPS
3
Option 4: Set up through a
PC/Mac (advanced)
1
2
English
2
Go to your Wi-Fi enabled PC/Mac.
Press and hold SETUP on the back of
SW700M for more than 3 seconds.
»» Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the SETUP button turns
solid amber.
Wait until successful connection of the
speaker to your home Wi-Fi network.
»» The speaker beeps.
»» The Wi-Fi status indicator on the WPS
button turns off.
»» The system status indicator on the
front panel turns solid green.
Tip
•• Only WPA and WPA2 are supported. If the wireless
security is WEP or no security is applied, the WPS
method does not work.
•• For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router configuration pages. See
the user manuals of the specific routers for details.
3
4
5
6
Select :) Philips Setup from the list of
available Wi-Fi networks on your PC/Mac.
After successful connection, open a web
browser on your PC/Mac.
Enter http://philips.speakers or 172.24.0.1
at the address bar and click the Enter key.
Make changes on the setup page and
confirm your settings.
»» The speaker beeps.
»» The Wi-Fi status indicator on the
SETUP button turns off.
»» The system status indicator on the
front panel turns solid green.
EN
11
Rename speakers
1
2
After successful Wi-Fi setup, go to the
home page and tap the speaker icon on
the app screen.
Tap > beside the speaker name.
3
Rename the speaker as you like.
4
Tap Done to confirm.
12
EN
3
Tap the Connect icon
screen.
on the play
English
5Play
Enjoy Spotify music services
through SW700M
Note
•• With Spotify, you can enjoy unlimited music on your
new device. Thanks to the Spotify Connect feature, you
can play and control all this music wirelessly. Choose
music on your mobile or tablet, and hear it on your
brand new device.
•• Make sure that the speaker is connected to your home
Wi-Fi network with Internet connection available.
1
2
Switch to the Spotify app from SpeakerSet
or open the Spotify app directly.
Log in to your Spotify premium account.
4
Select the speaker for music streaming.
Username
Password
Philips SW700M xxxxxx
EN
13
5
Stream music from the Spotify app to the
speaker.
During play, you can:
• press
on the speaker to pause/
resume music play.
• press / on the speaker to skip to
the previous/next song.
• press +/- on the speaker to adjust
volume level.
Tip
•• See the SpeakerSet app screen for more advanced
settings.
•• You can take your iOS or Android device away from
the network, or even switch it off. In this case, Spotify
music will continue to play on your speaker.
Stream music to multiple
speakers at the same time
You can add multiple Spotify Multiroom
Speakers connected to the same Wi-Fi network
into a group. Then, you can stream music from
Spotify on your iOS or Android device in the
same Wi-Fi network to all speakers in the group
at the same time. In this way, you can enjoy
music everywhere at your home.
14
EN
Group and ungroup speakers
1
2
3
Connect multiple Spotify Multiroom
Speakers to your home Wi-Fi network
(see ‘Connect SW700M to your home
Wi-Fi network’ on page 8).
Run SpeakerSet on your iOS/Android
smartphone or tablet.
On the home page, tap
beside a
speaker to act as the main speaker of a
group.
5
6
Tick circles beside the speakers to add
them into the group.
Tap > beside the group name to enter the
edit page.
Edit the group name as you like on the edit
page.
7
Tap the check mark at the top right on the
above app screen, and then wait for more
than 10 seconds until the grouping finishes.
To ungroup speakers:
1
2
Tap
beside the main speaker.
Untick the box beside the speaker to be
removed from the group.
EN
15
English
4
Enjoy music streamed to the group
speakers
1
2
On the home page, tap the icon of the
main speaker on the SpeakerSet app
screen.
To adjust volume of all speakers in a group at
the same time:
1
Tap Go Spotify app to play music to
switch to the Spotify app.
2
3
4
5
16
Open the SpeakerSet app, then tap
on the main page to enter the volume
adjustment page.
Log in to your Spotify premium account.
Tap the Connect icon
main speaker.
to select the
Select and play your favorite music from
the Spotify app.
»» You can enjoy music streamed to all
speakers in the same group at the
same time.
EN
Move the group volume slider to adjust
volume of all speakers in the group at the
same time.
English
To adjust volume of an individual speaker:
• Press +/- on the top panel of the speaker.
• Open the SpeakerSet app, then move the
slider beside the speaker on the above
volume adjustment page directly.
To play/pause music play:
• Press
on the top panel of any speaker
in the group or use controls on the Spotify
app screen directly.
Tip
•• On the volume adjustment page of the SpeakerSet app,
you can also tap beside a speaker to mute/unmute
its volume output.
•• More music controls and sound settings are available on
the SpeakerSet app screen.
EN
17
6 Other features
5
Tap Factory reset to enter the factory
reset page.
Restore factory settings
In some cases, you may need to reset the
speaker, for example, when you need to reset
the Wi-Fi settings or log out from the current
Spotify premium account.
1
2
3
4
Make sure that SW700M is powered on
and connected to the same Wi-Fi network
as your smartphone or tablet.
Make sure that your home Wi-Fi network
is connected to the Internet.
Run SpeakerSet on your iOS or Android
smartphone or tablet.
Tap the speaker image to see options
available for the speaker.
6
Tap Yes to reset your speaker.
If the above operation fails, you can reset the
speaker in the following way:
1
2
Unplug the power cable.
Hold both the + and keys on the top
panel and then plug in the power cable
again.
Tip
•• The speaker reboots after factory reset.
•• Your Spotify account will be logged out after factory
reset.
•• If the reset speaker is running in a group, it will be
ungrouped. When the main speaker is reset, one of
the other speakers in the group will serve as the main
speaker instead.
18
EN
5
Tap Firmwareupgrade to enter the
firmware upgrade page.
English
Upgrade firmware
To improve the performance of SW700M, Philips
may offer you new firmware for upgrade of your
SW700M.
Warning
•• Always connect your SW700M to AC power for
firmware upgrade. Never power off your SW700M nor
close the app during firmware upgrade.
1
2
3
4
Make sure that SW700M is powered on and
connected to the same Wi-Fi network as
your smartphone or tablet.
Make sure that your home Wi-Fi network is
connected to the Internet.
Run SpeakerSet on your iOS or Android
smartphone or tablet.
Tap the speaker image to see options
available for the speaker.
6
7
8
Tap Check online to see whether any new
version of firmware is available.
If a new version is available, tap Update to
start firmware upgrade.
»» The system status indicator on the
front panel blinks amber and red
alternately during this process.
Wait until the firmware upgrade process
finishes, then tap OK to reboot the
speaker.
Tip
•• Depending on the network connection, it may take 10
minutes to finish upgrade.
EN
19
7Product
information
WPS PBC
(one button
push)
Yes
General information
Note
•• Product information is subject to change without prior
notice.
AC power
PHILIPS
SWITCHING
POWER SUPPLY
Specifications
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
2 x 2W RMS @
10% THD
20 Hz - 20 kHz,
±3 dB
> 85 dB
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
8 ohm
66 mm full range
83dB/m/W
Wireless
Wireless
standard
Wireless
security
Frequency
range
20
EN
802.11b/g/n
WEP, 10 or 26 hex digit keys
WPA (TKIP) or WPA2
(TKIP / AES) with 8 - 40
ASCII printable characters
passphrase
2412 - 2462 MHz (CH1CH11) (for /79, /37, /55, /97)
2412 - 2472 MHz (CH1CH13) (for /12, /10, /05)
Operation Power
Consumption
Power Consumption
in Network Standby
Dimensions
-M
ain Unit (L x W
x H)
Weight
- Main Unit
Model: TPA158B12150-EU; input:
100 - 240 V~, 50/60 Hz
0.5A MAX; output:
15V 0.8 A
Model: OH1015E1500800U1;
input: 100 - 240 V~,
50/60Hz, 350mA;
output: 15V 800 mA
12 W
< 3W
288 x 170 x 95 mm
1.1 kg
Warning
•• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the
system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.philips.
com/welcome). When you contact Philips, ensure
that the apparatus is nearby and the model
number and serial number are available.
No power
•• Make sure that the AC power plug of the
speaker is connected properly.
•• Make sure that there is power at the AC
outlet.
•• Check whether the speaker is in standby
mode (see ‘Connect power and switch on’
on page 6).
No sound
•• Check whether the speaker is muted or
the streamed music is still buffering. The
system status indicator blinks green when the
speaker is muted or during music buffering. If
the speaker is muted, adjust volume on the
SpeakerSet app or on SW700M directly.
•• Check the Wi-Fi network connection. Set up
the network again if needed (see ‘Connect
SW700M to your home Wi-Fi network’ on
page 8).
•• If there is no sound from a speaker in a
group, check whether the speaker is out of
range. You can check whether the wireless
connection of the speaker is poor on the app
screen directly.
No response from the speaker
•• Restart SW700M, and then set up the Wi-Fi
network for SW700M again (see ‘Connect
SW700M to your home Wi-Fi network’ on
page 8).
••
••
Disconnect and reconnect the AC power
plug to switch on the speaker again.
If there is no sound from a speaker in a
group, check whether the speaker is out of
range. You can check whether the wireless
connection of the speaker is poor on the
app screen directly.
How can I reconfigure the Wi-Fi settings?
•• Reset the speaker (see ‘Restore factory
settings’ on page 17), and then configure
the Wi-Fi settings again (see ‘Connect
SW700M to your home Wi-Fi network’ on
page 8).
Occasional breaking of music streaming
Do one or all of the following:
•• Move SW700M closer to your Wi-Fi
router.
•• Remove any obstacles between SW700M
and your Wi-Fi router.
•• Avoid using Wi-Fi channel which is
overlapped by the nearby Wi-Fi network.
•• Check if your network speed is fast enough
(in cases where multiple devices share the
same router, the wireless performance may
be affected). Turn off the other devices
connected to your home router.
•• Enable the Quality of Service (QoS)
option (if available on the Wi-Fi router).
•• Turn off other Wi-Fi routers.
No response from the speaker
•• Restart SW700M, and then set up the
Wi-Fi network for SW700M again (see
‘Connect SW700M to your home Wi-Fi
network’ on page 8).
•• Disconnect and reconnect the AC power
plug to switch on the speaker again.
•• If there is no sound from a speaker in a
group, check whether the speaker is out of
range. You can check whether the wireless
connection of the speaker is poor on the
app screen directly.
EN
21
English
8Troubleshooting
9Appendix:
Understand
meanings of
LED colors
1
3
1
1 blinking green
quickly
1 blinking green
slowly
1
1
a
1 dimmed by 50% in
solid green
1
c
1 blinking amber
quickly, and 3 blinking
green
1 solid green
1 solid red
1
1 blinking red
1
b
1
a System status indicator (on the front
panel)
2
1
b SETUP indicator (on the back panel)
c WPS indicator (on the back panel)
LED
colors
No light
1 blinking amber
slowly
1 blinking amber
quickly
1
1
1
22
LED behavior
1 and 2 indicators in
solid amber
2
EN
Speaker
status
Power off
Booting up
Connecting
to a
network
In appassisted
Wi-Fi setup
mode
1
1 solid red, and 2
solid amber
1 blinking red and
amber
1 blinking red, amber
and green alternately
In WPS
mode
Network
connection
successful
During audio
buffering
Muted or
playback
paused
In standby
mode with
network
connection
In standby
mode
without
network
connection
Network
connection
failed
During
factory reset
During
firmware
upgrade
Firmware
upgrade
failed
2014 © WOOX Innovations Limited.
All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks
of Koninklijke Philips N.V. and are used by WOOX Innovations
Limited under license from Koninklijke Philips N.V.
SW700M_UM_EN_05_V1.0