INSTALLATION INSTRUCTIONS
FSB-4213
FLAT PANEL DISPLAY ADAPTER PLATE
For Sharp LC-15M4U
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
Figure 1
(1) Adapter Bracket
(4) Nylon Spacer
(4) M4 X 6mm Phillips Pan Head Screws
(4) M3 X 20mm Pan Head Machine Screws
(1) 1/8” Hex Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!
1.
2.
3.
FLAT PANEL DISPLAYS ARE EXTREMELY FRAGILE.
Remove table stand from back of display.
Place nylon spacers over four mounting holes.
Align four center countersink holes with mounting holes on back of display and secure with (4) M3 screws.
Optional VESA mounting:
4.
Using 5/32” hex key, remove four mounting buttons from bracket.
5. Using four tapped holes of interface bracket and M4 X 6mm Phillips Screws (provided), secure adapter bracket
to any mounting device that uses a 75mm x 75mm VESA pattern.
Figure 2
01/30/04
8804-000130
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com