Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
User manual
AZ700T
Contents
1Important
2
Risk of swallowing batteries
3
2 Your CD Soundmachine
4
Introduction4
What's in the box
4
Overview of the main unit
5
Overview of the remote control
6
3 Get started
7
4Play
9
Prepare the remote control
Connect power
Turn on
Turn off
Play CD
Play from USB devices
Play from Bluetooth-enabled devices
Play from an external device
7
7
8
8
13
6 Listen to FM radio
14
7 Other features
15
Tune to FM radio stations
Store radio stations automatically
Store radio stations manually
Select a preset radio station
Set the sleep timer
Turn screen backlight on/off
Listen through the headphone
16
9Troubleshooting
18
10Notice
20
Specifications
16
Supported MP3 disc formats
16
USB playability information
17
Maintenance17
Compliance20
Care of the environment
20
Trademark notice
20
9
9
9
11
5 Play options
Control play
Program tracks Adjust sound
8 Product information
13
13
13
14
14
14
14
15
15
15
EN
1
1Important
•
•
•
•
•
•
•
•
•
•
•
•
2
Read these instructions.
Follow all instructions.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the unit.
Only use attachments/accessories specified
by the manufacturer.
Unplug this unit during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the
unit has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the unit has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery
is incorrectly replaced. Replace only with
the same or equivalent type.
The unit shall not be exposed to dripping
or splashing.
EN
•
•
Do not place any sources of danger on
the unit (e.g. liquid filled objects, lighted
candles).
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•• Never remove the casing of this apparatus.
•• Never place this apparatus on other electrical
equipment.
•• Never look into the laser beam inside this apparatus.
Hearing safety
Caution
•• To prevent possible hearing damage, do not listen at
high volume levels for long periods. Set the volume to a
safe level. The louder the volume, the shorter is the safe
listening time.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume
continuously upwards as your hearing
adapts.
• Do not turn up the volume so high that
you can’t hear what’s around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations.
• Excessive sound pressure from earphones
and headphones can cause hearing loss.
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Risk of swallowing batteries
•
•
•
•
The product or remote control may
contain a button cell battery, which is
possible to be swallowed. Keep the battery
out of reach of children at all times! If
swallowed, the battery can cause serious
injury or death. Severe internal burns can
occur within two hours of ingestion.
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
EN
3
2 Your CD
Soundmachine
Introduction
With this CD Soundmachine, you can:
• listen to FM radio;
• enjoy audio from discs, USB device,
Bluetooth devices, and other external
audio devices;
• program the play sequence of tracks.
The unit offers you Dynamic Bass Boost (DBB)
and Digital Sound Control (DSC) to enrich
sound.
What's in the box
Check and identify the contents of the package:
• Main unit
• AC power cord
• Remote control (with battery)
• Short user manual
• Safety sheet
4
EN
Overview of the main unit
a
b
c
d
q
p
e
f
g
h
o
n
m
l
i
j
k
a FM antenna
• Improve FM reception.
i MODE
• Select a play mode: repeat or shuffle.
b
j SOURCE
• Select a source.
• Headphone socket.
c AUDIO-IN
• Connect an external audio device.
k
d
l DBB
• Turn dynamic bass boost on or off.
e
f
• Turn the unit on or off.
• Stop play.
• Erase a program.
/
TUNING +/• Skip to the previous or next track.
• Tune to FM radio stations.
• Search within a track.
g ALBUM/PRESET -/+
• Select a preset radio station.
• Skip to the previous or next album.
h PROG
• Program tracks.
• USB socket.
m DSC
• Select a preset sound setting.
n VOL +/• Adjust volume.
o
/PAIRING
• Press to start or pause the play.
• Press and hold to enter pairing mode
in Bluetooth source.
p Display panel
• Display current status.
q OPEN•CLOSE
• Open the disc compartment.
EN
5
f REPEAT
• Select repeat play mode.
Overview of the remote
control
USB
CD
a
BT
g SHUFFLE
• Select shuffle play mode.
h DBB
• Turn dynamic bass boost on or off.
AUDIO IN
TUNER
i DSC
• Select a preset sound setting.
b
n
PAIRING
k MUTE
• Mute or restore sound.
c
m
l
d
e
PROG
SLEEP
MUTE
BACKLIGHT
f
REPEAT
g
SHUFFLE
h
DBB
k
VOL
j
DSC
i
a Source selector: CD, USB,
TUNER,BLUETOOTH, or AUDIO IN
• Select a source.
b
/
• Skip to the previous or next album.
• Select a preset radio station.
c
/PAIRING
• Start or pause play.
• In Bluetooth mode, press and hold to
enter pairing mode.
d
/
• Search within a track.
e PROG
• Program radio stations.
• Program tracks in CD/USB mode.
6
EN
j VOL +/• Adjust volume.
l SLEEP/BACKLIGHT
• Set sleep timer.
• Turn the backlight on or off.
m
n
• Stop play.
• Erase a program.
/
• Skip to the previous or next track.
3 Get started
CR2025
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the exhausted battery:
1
2
3
4
Remove the screw.
Open the battery compartment and insert
one CR2025 battery with correct polarity
(+/-) as indicated.
Connect power
The unit can be powered by either AC power
or batteries.
Option 1: AC power
Warning
•• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
•• Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
Connect the AC power cord to:
• the AC~ MAINS socket on the unit.
• the wall socket.
Tip
•• To save energy, turn the unit off after use.
Close the battery compartment.
Tighten the screw.
EN
7
Option 2: Battery power
Caution
•• Batteries contain chemical substances, so they should
be disposed of properly.
Note
•• Batteries are not supplied with the accessories.
1
2
3
Open the battery compartment.
Insert 6 batteries (type: R-20, UM-1 or
D-cells) with correct polarity (+/-) as
indicated.
Close the battery compartment.
Turn on
Press .
»» The unit switches to the last selected
source.
Tip
•• To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
8
EN
Turn off
Press again.
»» The backlight on the display panel
turns off.
4Play
Play CD
1
2
3
Press CD to select the disc source.
Press OPEN•CLOSE to open the disc tray.
Insert a disc with the printed side facing up,
then close the disc tray.
»» Play starts automatically.
Play from Bluetooth-enabled
devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
Note
•• WOOX Innovations does not guarantee the
compatibility with all Bluetooth devices.
•• Before pairing a device with this product, read its user
Play from USB devices
Note
•• Make sure that the USB device contains playable audio
content.
1
2
Press USB to select USB source.
Insert the USB device into the
socket.
»» Play starts automatically. If not, press
.
manual for Bluetooth compatibility. Make sure that the
connected Bluetooth device supports the Advanced
Audio Distribution Profile (A2DP) and the Audio Video
Remote Control Profile (AVRCP).
•• The product can connect a maximum of 8 Bluetooth
devices simultaneously.
•• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•• The operational range between this product and a
Bluetooth device is approximately 10 meters (33 feet).
•• Any obstacle between this product and a Bluetooth
device can reduce the operational range.
•• Keep away from any other electronic device that may
cause interference.
Note
•• The maximum current for USB is 0.5A.
EN
9
Option 1: Pair and connect through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
With the NFC function, data communication
can be achieved easily just by touching the
relevant symbol or designated location on NFC
compatible devices.
3
On your Bluetooth device, accept the
pairing request with "PhilipsAZ700T".
If necessary, input "0000" as the pairing
password.
»» After successful pairing and connection,
[CONNECTED](Connected) is
displayed.
NFC
Connect to
Philips AZ700T
ACCEPT
Note
•• Compatibility with all NFC devices is not guaranteed.
1
2
Press BT to select Bluetooth source.
»» [BLUETOOTH](Bluetooth) is
displayed.
Enable the NFC feature on your Bluetooth
enabled device and touch the NFC tag on
the top of the CD sound machine with
back of your Bluetooth device.
Option 2: Pair and connect manually
Note
•• The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
1
NFC
2
3
10
EN
Press BT to select Bluetooth source.
»» [BLUETOOTH](Bluetooth) is
displayed.
»» The CD sound machine enters pairing
mode, and [PAIRING] (Pairing) is
displayed on the screen.
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
Select [Philips AZ700T] on your device for
pairing. If necessary, enter default password
“0000”.
»» After successful pairing and
connection, the product beeps twice,
and [CONNECTED] (connected ) is
displayed on the screen.
Disconnect the Bluetooth-enabled
device
•
•
•
BT
USB
CD
BT
Press and hold PAIRING for 2 seconds;
Disable Bluetooth on your device; or
Move the device beyond the
communication range.
Connect another Bluetooth-enabled
device
AUDIO IN
TUNER
Disable Bluetooth on the current device, and
then connect another device.
Clear Bluetooth pairing history
Press and hold for 7 seconds to clear the
Bluetooth pairing history.
Philips AZ700T
Play from an external device
You can also listen to an external audio device
such as an MP3 player through this product.
1
Note
•• If you cannot find [Philips AZ700T] on your device,
2
press
/PAIRING for 2 seconds to enter pairing
mode,[PAIRING] (Pairing) is display on the screen.
Play from Bluetooth device
3
Press TUNER/AUDIO IN repeatedly to
select [AUDIO-IN] source.
Connect an audio cable (3.5mm, not
supplied) to:
• the AUDIO-IN socket on the unit.
• the headphone socket on an external
device.
Play the external device (see the device's
user manual).
After successful Bluetooth connection, play
audio on the Bluetooth device.
»» Audio streams from your Bluetooth
device to the product.
• To skip to previous/next track, press
/ .
• To pause or resume the playback, press
.
EN
11
12
EN
5 Play options
Program tracks
In CD or USB mode, you can program a
maximum of 20 tracks.
Control play
In CD or USB mode, you can control play
through the following operations.
/
/
/
REPEAT
SHUFFLE
Press and hold to fast-forward
or fast-reverse the track during
playback, then release to resume
play.
Skip to the previous or next MP3
album.
Skip to the previous or next track.
Start or pause play.
Stop play.
[ ]: Play the current track
repeatedly.
[
]: Play all tracks repeatedly.
To return to normal play, press
REPEAT repeatedly until the repeat
icons disappear.
[
]: Play tracks randomly.
To return to normal play, press
SHUFFLE repeatedly until the
shuffle icon disappear.
Tip
•• Only [
] and [
] can be selected when you
play the programmed tracks.
1
2
3
4
5
6
Press
to stop playback.
Press PROG to activate the program
mode.
»» [PROG] (program) begin to blink.
For MP3 tracks, press ALBUM/PRESET +/to select an album.
Press / to select a track number, then
press PROG to confirm.
Repeat steps 3-4 to program more tracks.
Press
to play the programmed tracks.
»» During play, [PROG] (program) is
displayed.
• To erase the program, press twice.
• To review the program, when playback
is stopped, press and hold PROG for
2 seconds.
Adjust sound
During play, you can adjust volume and select
the sound effects.
Key
VOL
+/MUTE
DBB
DSC
Function
Increase or decrease volume.
Mute or resume sound.
Turn dynamic bass enhancement on
or off.
Select a preset sound effect:
ROCK (rock); CLASSIC (classic);
POP (pop); JAZZ (jazz)
EN
13
6 Listen to FM
radio
Store radio stations manually
Note
•• You can program a maximum of 30 FM radio stations.
Tune to FM radio stations
Note
1
2
•• For optimal reception, fully extend and adjust the
position of the FM antenna.
1
2
Press TUNER/AUDIO IN repeatedly to
select FM radio source.
Press and hold
/
for 2 seconds.
»» [SEARCH] (search) is displayed.
»» The product tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a radio station with weak signal:
Press
/
repeatedly until you find better
reception.
Store radio stations
automatically
Note
•• You can program a maximum of 30 FM radio stations.
In tuner mode, press and hold PROG for 2
seconds.
»» [AUTO STORE] (auto store) is
displayed.
»» The unit stores all the available FM
radio stations.
»» The first stored radio station is
broadcast automatically.
14
EN
3
4
Tune to an FM radio station.
Press PROG to activate the storing mode.
»» [PROG] (program) blinks on the
display.
Press
to allocate a number (1 to 30)
to this radio station, then press PROG to
confirm.
»» The preset number and the frequency
of the preset station are displayed.
Repeat the above steps to store other
stations.
Note
•• To remove a pre-stored FM radio station, store another
station in its place.
Select a preset radio station
In FM tuner mode, press
number.
to select a preset
7 Other features
Set the sleep timer
This unit can switch to standby automatically
after a preset period.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
minutes).
»» When the sleep timer is activated,
appears.
To deactivate sleep timer:
• Press SLEEP repeatedly until [SLEEP OFF]
(sleep off) is displayed.
»» When sleep timer is deactivated,
disappears.
Turn screen backlight on/off
Press and hold BACKLIGHT for 2 seconds.
Listen through the headphone
Plug a headphone into the
socket on the unit.
EN
15
8Product
information
Note
•• Product information is subject to change without prior
notice.
Specifications
Search Selectivity
Total Harmonic
Distortion
Signal to Noise Ratio
26dBf
<3%
>50 dBA
Bluetooth
Bluetooth Version
Range
Bluetooth Frequency
Band
V3.0 + EDR
10 m (Free space)
2.402 GHz ~
2.48GHz
General
Amplifier
Max Output Power
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
Audio-in Input
12 W
125 -16000 Hz,
-3dB
>66 dBA
<1 %
650 mV RMS
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
S/N Ratio
16
EN
220-240V~, 50/60 Hz;
DC 9 V, 6 x 1.5 V/R20
/D CELL
15 W
< 0.5 W
435 x 170 x 271 mm
2.7 kg
Semiconductor
12cm/8cm
CD-DA, CD-R, CDRW, MP3-CD
24Bits / 44.1kHz
<1%
Supported MP3 disc formats
125 -16000 Hz, -3dB
>66 dBA
•
•
•
•
•
Tuner
Tuning Range
Tuning grid
Sensitivity:
-Mono, 26dB S/N Ratio
-Stereo, 46dB S/N Ratio
Power supply
- AC Power
- Battery
Operation Power
Consumption
Standby Power
Consumption
Dimensions
- Main Unit
(W x H x D)
Weight (Main Unit)
87.5 - 108MHz
50 kHz
<22 dBf
<43 dBf
ISO9660, Joliet
Maximum title number: 512 (depending on
file name length)
Maximum album number: 255
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32~256 (kbps),
variable bit rates
USB playability information
Maintenance
Compatible USB devices:
• USB flash memory (USB 2.0 or
USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• memory cards (requires an additional
card reader to work with this
apparatus)
Supported formats:
• USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• Directory nesting up to a maximum of
8 levels
• Number of albums/ folders: maximum
99
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and is not be shown in the
display.
• Unsupported file formats are skipped.
For example, Word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• WMA, AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
Clean the cabinet
• Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
• When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
EN
17
9Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•• Ensure that the AC power plug of the unit
is connected properly.
•• Ensure that there is power at the AC
outlet.
•• Insert the batteries with their polarities
(+/– signs) aligned as indicated.
•• Replace the battery.
No sound or poor sound
•• Adjust the volume.
No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the system again.
•• As a power-saving feature, the unit
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
•• Insert the battery with its polarities (+/–
signs) aligned as indicated.
•• Replace the battery.
•• Aim the remote control directly at the
sensor on the front of the unit.
18
EN
USB device not supported
•• The USB device is incompatible with the
apparatus. Try another one.
No disc detected
•• Insert a disc.
•• Check if the disc is inserted upside down.
•• Wait until the moisture condensation at
the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Poor radio reception
•• Increase the distance between the unit and
your TV or VCR.
•• Fully extend the FM antenna.
Music playback is unavailable on this unit even
after successful Bluetooth connection.
•• The device cannot be used to play music
through this unit wirelessly.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
Bluetooth cannot be connected with this unit.
•• The device does not support the profiles
required for this unit.
•• The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•• This unit is not in pairing mode.
•• This unit is already connected with another
Bluetooth-enabled device. Disconnect that
device and then try again.
The paired mobile device connects and
disconnects constantly.
•• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
•• Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of this unit.
••
For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
this unit.
EN
19
10Notice
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Compliance
Hereby, WOOX Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC. You can find the
Declaration of Conformity on www.philips.com/
support.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
This symbol means that the product contains
batteries covered by European Directive
20
EN
2013/56/EU which cannot be disposed of with
normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
negative consequences for the environment and
human health.
Removing the disposable batteries
To remove the disposable batteries, see battery
installation section.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademark notice
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
This apparatus includes these labels:
Class II equipment symbol
This symbol indicates that the apparatus has a
double insulation system.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
Note
•• The type plate is located on the bottom of the
apparatus.
Specifications are subject to change without notice.
2014 © WOOX Innovations Limited.
All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used by WOOX
Innovations Limited under license from Koninklijke Philips N.V.
AZ700T_12_UM_V1.0