LevelOne IFP-0502 network switch Installation guide

Add to my manuals
2 Pages

advertisement

LevelOne IFP-0502 network switch Installation guide | Manualzz
Overview
IFP-0502
5-Port
Port Fast Ethernet Industrial PoE Switch,
4 PoE Outputs, 802.3at PoE Plus, 1 Port SC Multi
Multi-Mode
Mode Fiber, 2km
The LevelOne IFP-0502 Industrial Fast Ethernet PoE+ Switch
provides 4 ports at 10/100M TX PSE to supply power and
internet to PoE+ compatible Powered Devices (PD) in a
network setting. The multi-modal fibre IFP-0502 switch supplies
15.4 Watts for IEEE802.3af or 30 Watts (Max 36W) for
IEEE802.3at per port, and is configured for large industrial or
outdoor networks, with a maximum networking range of 2km.
With an industrial-standard DIN-rail mount for easy cabinet
deployment or wall mount for versatile network configurations,
the IFP-0502 comes in a sturdy metal casing rated to IP30 for
installation in industrial settings where humidity, dust, high or
low operating temperatures or vibrations could cause standard
devices to fail.
High Reliability
Quick Installation Guide
All components are built to withstand harsh environment
applications without compromise where humidity, temperature
variation and even shock vibration are concerns, including
Electric & Utility, Critical Infrastructure, Transportation and
Surveillance Security. This device operates under -40 to 75
Celsius (-40 to 167 Fahrenheit) temperature.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of
instant connectivity with no setup or configure required, truly
plug and play.
v1.0
IFP-0502
Power over Ethernet
This switch is Power Sourcing Equipment (PSE), and it is fully
complied with IEEE 802.3at PoE standard at maximum 30W
power budget per port. It helps to save infrastructure wiring
costs dramatically by eliminating electric wiring and less UPS
needed. Also, it is compatible with IEEE802.3af standard PD
devices.
Page 1
Features
• Meets NEMA TS1/TS2 Environmental requirements such as temperature,
shock, and vibration for traffic control equipment
• Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for
industrial environment
• Supports 1024 MAC addresses. Provides 1M bits memory buffer
• Provides one Port SC Multi-Mode Fiber with a maximum networking range
of 2km.
• Store-and-forward mechanism. Full wire-speed forwarding rate.
• Power Supply: 44~56VDC Terminal Block power input.
• 3.76W power consumption 48VDC full load
• -40℃ to 75℃ (-40℉ to 167℉) operating temperature range.
• Tested for functional operation @ -40℃ to 85℃ (-40℉ to 185℉).
• Metal case design and compliant with IP30 standard
Package Contents
IFP-0502
Din rail*1, wall mount*2, terminal block*1, screw*4
Quick Installation Guide
IFP-0502
Page 2
IFP-0502
Page 3
LED Status
Status
ON
Description
Power On
PWR 1, 2
OFF
Power Off
ON
both PW1 and PW2 are connected
SW (relay)
OFF
+
44–56VDC
–
Power Ground
+
44–56VDC
–
Power Ground
Relay Output
1A @ 24VDC
PW1
Terminal Block
LED
Power Input
PW2
only PW1 or PW2 is connected
10/100/Base-TX
LNK(1 ~ 4)
ON
TX link is detected
OFF
TX port is not detected
Flashing
TX port is active
ON
PD is connected
OFF
No PD is connected
ON
FX fiber is detected
OFF
FX fiber is not detected
Flashing
FX fiber is active
POE(1 ~ 4)
Fiber
F5
IFP-0502
Page 4
DIN Rail Mount
IFP-0502
Page 5
10/100Base-TX Connector
The following lists the pin-out of 10/100Base-TX ports.
Pin
• Assembly: Place the switch on the DIN rail from above using
the slot. Push the front of the switch toward the mounting
surface until it audibly snaps into place
• Start-up: Connect the supply voltage to start up the switch
via the terminal block (or DC JACK)
• Dismantling: Pull out the lower edge and then remove the
switch from the DIN rail.
IFP-0502
Page 6
Standard Port
Uplink Port
1
Output Transmit Data +
Input Receive Data +
2
Output Transmit Data -
Input Receive Data -
3
Input Receive Data +
Output Transmit Data +
4
NC
NC
5
NC
NC
6
Input Receive Data -
Output Transmit Data -
7
NC
NC
8
NC
NC
IFP-0502
Page 7

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement