BD-J5500
BD-J5500E
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
Safety Information
●●
Warning
This symbol indicates that
high voltage is present
inside. It is dangerous to
make any kind of contact
with any internal part of this
product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER(OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
●●
●●
●●
●●
●●
2
The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be blocked
or covered.
‐‐ Do not place this apparatus in a confined
space, such as a bookcase, or builtin cabinet,
unless proper ventilation is provided.
‐‐ Do not place this apparatus near or over
a radiator or heat register, or where it is
exposed to direct sunlight.
‐‐ Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorised
dealer immediately.
This apparatus uses batteries. In your community,
there might be environmental regulations that
require you to dispose of these batteries properly.
Please contact your local authorities for disposal or
recycling information.
Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in fire or electric shock.
Route power-supply cords so that they are
not likely to be walked on or pinched by
items placed on or against them. ●●
This symbol indicates
that important literature
concerning operation and
maintenance has been
included with this product.
●●
●●
●●
●●
●●
●●
Pay particular attention to cords at the plug
end, at wall outlets, and the point where
they exit from the apparatus.
To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
set due to lightning and power line surges.
Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds
to the local electrical supply.
Never insert anything metallic into the
open parts of this apparatus. Doing so may
create a danger of electric shock.
To avoid electric shock, never touch the
inside of this apparatus. Only a qualified
technician should open this apparatus.
Make sure to plug the power cord in until
it is firmly seated. When unplugging the
power cord from a wall outlet, always pull
on the power cord's plug. Never unplug by
pulling on the power cord. Do not touch
the power cord with wet hands.
If this apparatus does not operate normally
- in particular, if there are any unusual
sounds or smells coming from it - unplug
it immediately and contact an authorised
dealer or service Centre.
●●
●●
●●
●●
●●
●●
●●
●●
Maintenance of Cabinet.
‐‐ Before connecting other components to this
product, be sure to turn them off.
‐‐ If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try
to play back again.
Be sure to pull the power plug out of the
outlet if the product is to remain unused or
if you are leaving the house for an extended
period of time (especially when children,
elderly, or disabled people will be left alone
in the house).
‐‐ Accumulated dust can cause an electric
shock, an electric leakage, or a fire by
causing the power cord to generate sparks
and heat or the insulation to deteriorate.
Contact an authorised service Centre for
information if you intend to install your product
in a location with heavy dust, high or low
temperatures, high humidity, chemical substances,
or where it will operate 24 hours a day such as in
an airport, a train station, etc. Failing to do so may
lead to serious damage of your product.
Use only a properly grounded plug and wall outlet.
‐‐ An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power plug
must be readily accessible at all times.
Do not allow children to hang on the product.
Store the accessories (battery, etc.) in a location
safely out of the reach of children.
Do not install the product in an unstable
location such as a shaky self, a slanted floor,
or a location exposed to vibration.
Do not drop or strike the product. If the
product is damaged, disconnect the power
cord and contact a service Centre.
To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. ●●
●●
●●
●●
●●
●●
Do not use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can
damage the appearance of the product or erase
the printing on the product.
Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
Do not dispose of batteries in a fire.
Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
There is danger of an explosion if you replace
the batteries used in the remote with the
wrong type of battery. Replace only with the
same or equivalent type.
WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
WARNING - This product contains chemicals
known to the State of California to cause
cancer and reproductive toxicity.
CLASS 1 LASER product
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
CAUTION :
●● THIS PRODUCT USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE PRODUCT CORRECTLY
AS INSTRUCTED.
●● THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL. This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
connectors for connections.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
✎✎ NOTES
■■
If the Region number of a Blu-ray
Disc/DVDs does not correspond to
the Region number of this product,
the product cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is supplied
with a molded plug incorporating a fuse. The
value of the fuse is indicated on the pin face
of the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension lead
or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug to
a mains jack, as there is a risk of shock hazard
from the bared flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property
rights of certain third parties.
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
888 Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
999 Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
1111Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where it exits the apparatus.
1111Only use attachments/accessories
specified by the manufacturer.
111
222
333
444
555
666
777
1111Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold
with the apparatus.
When a cart is used,
use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
1111Unplug this apparatus during lightning
storms or when unused for long periods
of time.
1111Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
●● Some viewers may experience discomfort
while viewing 3D TV such as dizziness,
nausea, and headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active
Glasses, and rest.
●● Watching 3D images for an extended
period of time may cause eye strain. If you
feel eye strain, stop viewing 3D TV, remove
your 3D Active Glasses, and rest.
●● A responsible adult should frequently check
on children who are using the 3D function.
If there are any reports of tired eyes,
headaches, dizziness, or nausea, have the
child stop viewing 3D TV and rest.
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
●●
Do not use the 3D Active Glasses for other
purposes (Such as general eyeglasses,
sunglasses, protective goggles, etc.).
Do not use the 3D function or 3D Active
Glasses while walking or moving around.
Using the 3D function or 3D Active Glasses
while moving around may cause you to
bump into objects, trip, and/or fall, and
cause serious injury.
If you want to enjoy 3D content, connect
a 3D device (3D compliant AV receiver or
TV) to the player's HDMI OUT port using a
high-speed HDMI cable. Put on 3D glasses
before playing the 3D content.
The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT
port.
As the video resolution in 3D play mode
is fixed according to the resolution of the
original 3D video, you can not change the
resolution to your preference.
Some functions such as BD Wise, screen
size adjustment, and resolution adjustment
may not operate properly in 3D play mode.
You must use a high-speed HDMI cable for
proper output of the 3D signal.
Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46-inch
screen, stay 138 inches (11.5 feet) from the
screen.
Place the 3D video screen at eye level for
the best 3D picture.
When the player is connected to some 3D
devices, the 3D effect may not function
properly.
This player does not convert 2D content
into 3D.
"Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
3
Contents
Getting Started
Safety Information
Picture Settings..................................... 10
Warning.................................................. 2
Sound Settings...................................... 11
Precautions............................................. 3
Network Settings.................................. 12
Using the 3D function............................. 3
System Settings..................................... 13
Getting Started
Before using the User Manual................. 4
Logos of Discs the player can play............ 5
Accessories............................................. 6
Disc Types and Contents your player can play
Language Settings................................ 14
Media
Security Settings................................... 14
Support Settings................................... 14
Front Panel............................................. 7
Rear Panel.............................................. 7
Playing a Commercially Recorded Disc... 15
Remote Control...................................... 7
Playing Files on a USB Device................. 15
Connections
Playing a Disc with User Recorded
Content................................................ 16
Connecting to a TV................................. 8
Using DLNA.......................................... 16
Connecting to an Audio System.............. 8
Controlling Video Playback.................... 16
Connecting to a Network Router............. 9
Controlling Music Playback.................... 17
Playing Photo Contents......................... 18
The Setup Procedure............................... 9
Appendix
Menu Navigation.................................... 9
Troubleshooting.................................... 19
Accessing the Settings Menu................. 10
Specifications........................................ 20
Disc Type
Details
Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
3D Blu-ray Disc
General Settings................................... 14
Media Play
Settings
Before using the User Manual
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVDR/+R that have been recorded and finalized, or a
USB storage media containing DivX, MKV or MP4
contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R
or a USB storage media containing MP3 or WMA
contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BDRE/-R or a USB storage media containing JPEG
contents.
VIDEO
✎✎ NOTES
■■
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
■■
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 25
Mbps.
Playback may not work for some types of discs, or when you use specific functions, such as angle change and
aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if
necessary.
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
■■
■■
■■
■■
Disc types your player cannot play
●●
●●
4
HD DVD
DVD-ROM/PD/
MV, etc
●●
●●
DVD-RAM
Super Audio CD
(except CD layer)
●●
●●
DVD-RW (VR mode)
CVD/CD-ROM/
CDV/CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
●●
3.9 GB DVD-R for
Authoring.
Logos of Discs the player can play
Region Code
●●
●●
Both players and discs are coded by region.
These regional codes must match for a
disc to play. If the codes do not match, the
disc will not play.
The Region Number for this player is
displayed on the rear panel of the player.
Disc
Type
Blu-ray
Disc
DVDVIDEO
Area
a
North America, Central
America, South
America, Korea, Japan,
Taiwan, Hong Kong
and South East Asia.
b
Europe, Greenland,
French territories, Middle
East, Africa, Australia
and New Zealand.
c
India, China, Russia,
Central and South Asia.
1
2
The U.S., U.S. territories
and Canada
3
Taiwan, Korea, the
Philippines, Indonesia,
Hong Kong
5
6
●●
Blu-ray Disc
BD-LIVE
●●
●●
Region
Code
4
●●
Europe, Japan, the
Middle East, Egypt,
Africa, Greenland
Mexico, South America,
Central America,
Australia, New Zealand,
Pacific Islands, Caribbean
Russia, Eastern Europe,
India, North Korea,
Mongolia
3D Blu-ray Disc
●●
●●
●●
PAL broadcast System in U.K., France,
Germany, etc.
Supported File Formats
●●
Video File Support
File Extension
Container
●●
●●
●●
●●
●●
●●
●●
Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
The player does not support folder or
file names longer than 128 characters.
Some USB/External HDD/digital camera
devices may not be compatible with the
player.
Your player supports the FAT16, FAT32,
and NTFS file systems.
Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
The player does not support the PTP protocol.
Do not disconnect a USB device during
a "loading" process.
Video Codec
DivX 3.11/4/5/6
Notes on the USB connection
●●
China
DivX
The bigger the image resolution, the longer the image takes to display.
This player cannot play MP3 files with DRM (Digital Rights Management) downloaded
from commercial sites.
Your player only supports video with a frame rate under 30fps (frames per second).
Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
and USB HDD. (HUB is not supported.)
Certain USB HDD Devices, multi-card readers and thumb drives may not be
compatible with this player.
If some USB devices require excessive power, they may be limited by the circuit safety
device.
If playback from a USB HDD is unstable, provide additional power by plugging the
HDD into a wall socket.
If the problem continues, contact the USB HDD manufacturer.
SAMSUNG is not responsible for any data file damage or data loss.
Your player does not support NTFS compressed files, sparse files, or encrypted files.
You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
*.avi
AVI
MP4v3
H.264 BP/MP/HP
*.mkv
MKV
*.wmv
WMV
(wmv9)
*.mp4
MP4
*.mpg
*.mpeg
MPEG
VC-1 AP
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
Audio Codec
Resolution
MP3
Dolby Digital
DTS
WMA
PCM
1920x1080
MP3
Dolby Digital
DTS
1920x1080
WMA
AAC
MP1, 2
Dolby Digital
DTS
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
5
Picture File Support
●● Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the
file itself is corrupted.
-- Files having a higher Bit rate/frame rate than standard may stutter during sound/video
playback.
-- The Seek (skip) function is not available if the file’s index table is damaged.
●● Video
●●
●●
●●
decoder
●●
*.jpg
*.jpeg
*.jpe
JPEG
15360x8640
*.png
PNG
15360x8640
●●
●●
This player can play back AVCHD format discs. These discs are normally recorded and
used in camcorders.
The AVCHD format is a high definition digital video camera format.
The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs
that use "x.v.Color" format.
"x.v.Color" is a trademark of Sony Corporation.
"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co.,
Ltd. and Sony Corporation.
✎✎ NOTES
Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
✎✎ NOTES
■■
Resolution
AVCHD (Advanced Video Codec High Definition)
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bit rate: 320kbps
■■
Type
decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
●● Audio
File Extension
Playback of some DivX, MKV or MP4 file may not be supported depending on
their video resolution and frame rate.
■■
Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
■■
"x.v.Color" offers a wider colour range than normal DVD camcorder discs.
Accessories
Music File Support
Check for the supplied accessories shown below.
6
File
Extension
Container
Audio
Codec
Support Range
*.mp3
MP3
MP3
-
*.wma
WMA
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22,
32, 44.1, 48
* Bit rates - All bit-rates from 5kbps to
355kbps
Batteries for Remote
Control (AAA Size)
User Manual
Remote Control
Front Panel
Remote Control
REMOTE CONTROL SENSOR
POWER BUTTON
Tour of the Remote Control
Turn the player on and off.
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Press to open and close the disc tray.
Press numeric buttons to operate options.
DISC TRAY
USB HOST
OPEN/CLOSE BUTTON
■■
■■
Use to enter the popup menu/title menu.
Use to enter the disc menu.
✎✎ NOTES
You can perform software upgrades using the USB Host jack with a USB flash
memory stick only.
Please open and pull out the USB cover before inserting USB device.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to skip backwards or forwards.
Press to stop a disc.
Press to play a disc.
AUDIO
HOME
Press to move to the home menu.
SUBTITLE
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Use to access various audio functions on
a disc (Blu-ray Disc/DVD).
Press to use Tools menu.
Rear Panel
Use to display the playback information.
Use to select menu items and change
menu values.
Press to exit the menu.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to use bonusview function.
BONUS
VIEW
REPEAT
A-B
REPEAT
Press to see the full screen on a TV.
During Blu-ray or DVD disc playback, the
Full screen button does not operate.
Allows you to repeat a title, chapter,
track or disc.
FULL
SCREEN
Allows you to repeat A-B disc.
Installing batteries
●●
●●
●●
HDMI OUT
LAN
DIGITAL AUDIO OUT
Check if the batteries are drained.
Check if the remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
!! CAUTION
■■
✎✎ NOTES
■■
If the remote does not operate properly:
●● Check the polarity (+/–) of the batteries.
■■
■■
■■
Dispose of batteries according to local
environmental regulations. Do not put
them in the household trash
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or overheat the batteries.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
7
Connections
Connecting to an Audio System
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
You can connect the Blu-ray player to an audio system using one of the methods
illustrated below.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI compatible AV receiver
●●
●●
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your receiver.
Best quality (Recommended)
Method 2 Connecting to an AV receiver with a Digital Coaxial Cable
Audio
Video
●●
●●
●●
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out
jack on the product to the Digital Coaxial In jack of the receiver.
Good quality
You will hear sound only through the front two speakers with Digital Output set to
PCM.
✎✎ NOTES
■■
■■
■■
■■
■■
■■
■■
8
If you use an HDMI-to-DVI cable to connect to your display device, you must also
connect the Digital Audio Out on the player to an audio system to hear audio.
An HDMI cable outputs digital video and audio, so you don't need to connect an
audio cable.
Depending on your TV, certain HDMI output resolutions may not work. Please
refer to the user manual of your TV.
When you connect the player to your TV using the HDMI cable or to a new TV,
and then turn it on for the first time, the player automatically sets the HDMI
output resolution to the highest supported by the TV.
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour
to Off in the menu.
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a
High speed HDMI cable.
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection),
random noise appears on the screen.
Method 1
Audio
Method 2
Audio
Connecting to a Network Router
You can connect your player to your network router using one of the methods illustrated
below.
To use the DLNA network functionality, you must connect your PC to your network as
shown in the illustration.
Wired Network
Settings
The Setup Procedure
●●
●●
●●
●●
Broadband modem
(with integrated router)
Broadband
service
Or
Router
The Home screen will not appear if
you do not configure the setup.
The OSD (On Screen Display) may
change in this player after you
upgrade the software version.
The access steps may differ
depending on the menu you selected.
After the setup process is complete, you
can then operate the panel buttons and
remote control.
After you have connected the player to your
TV, turn on the TV and player. When you
turn on the player the first time, the player's
Setup screen appears on the TV. The Setup
procedure lets you set the On Screen Display
(OSD) and menu languages, the aspect ratio
(screen size), the network type, and connect
the player to your network.
✎✎ NOTES
■■
Broadband
service
Broadband
modem
■■
■■
✎✎ NOTES
■■
■■
Internet access to Samsung's software update server may not be allowed,
depending on the router you use or your ISP's policy. For more information,
contact your ISP (Internet Service Provider).
DSL users, please use a router to make a network connection.
■■
■■
The Home menu will not appear
if you do not configure the setup
except as noted below.
If you press the BLUE (D) button
during network setup, you can
access the Home menu even if the
network setup is not completed yet.
When you return to the Home
menu, the full screen mode is
cancelled automatically.
If you want to display the Setup
screen again to make changes, press
the ^ button on the front panel of
the player for more than 5 seconds
with no disc inserted. This resets the
player to its default settings.
After the setup process is complete.
you can operate the HDMI-CEC
function.
■■
■■
If you want to use the Anynet+
(HDMI-CEC) function to aid in the
initial set up process, please follow
the instructions below.
1) Connect the player to an
Anynet+(HDMI-CEC) compliant
Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player.
3) Set the TV to the Setup
Procedure.
If you leave the player in the stop
mode for more than 5 minutes
without using it, a screen saver will
appear on your TV. If the player is
left in the screen saver mode for
more than 25 minutes, the power
will automatically turn off.
Menu Navigation
AUDIO
HOME
SUBTITLE
1
3
2
4
BONUS
REPEAT
REPEAT
FULL
1
HOME Button : Press to move to
the Home menu.
2
RETURN Button : Return to the
previous menu.
3
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
4
EXIT Button : Press to exit the
current menu.
VIEW
A-B
SCREEN
9
Home Menu
●●
5
1
Play disc
Videos
Photos
Music
2
6
No Disc
7
3
App 1 App 2
App 3
App 4
App 5
More
Change Device
Settings
222 Press the ▲▼◀▶ buttons to select
Settings, and then press the v button.
333 Press the ▲▼ buttons to select the
desired submenu, and then press the
v button.
444 Press the ▲▼ buttons to select the desired
item, and then press the v button.
555 Press the EXIT button to exit the menu.
✎✎ NOTES
■■
4
8
The access steps may differ depending
on the menu you selected. The OSD
(On Screen Display) may change in
this player after you upgrade the
software version.
Selects Videos.
2
Selects Music.
3
Selects Settings.
4
Selects Change Device.
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc.
5
Selects Photos.
3D Settings
6
Selects Play disc.
7
Selects applications.
Select whether to play a Blu-ray Disc with
3D contents in 3D Mode.
8
Selects More applications.
Picture Settings
✎✎ NOTES
✎✎ NOTES
■■
The Videos, Photos, and Music
options require that you have
an appropriate disc inserted into
the player or a USB flash device
attached to the player.
Accessing the Settings Menu
To access the Settings menu and submenus, follow these steps:
111 Press the POWER button.
The Home Menu appears.
10
■■
Depending on the type of television you
have, you may want to adjust the screen
size setting.
For some 3D discs, to stop a movie
during 3D playback, press the 5
button once.
The movie stops and the 3D mode
option is de-activated.
To change a 3D option selection
when you are playing a 3D movie,
press the 5 button once.
The Blu-ray menu appears. Press
the 5 button again, then select 3D
Settings in the Blu-ray menu.
Depending on the content and the
position of the picture on your TV
screen, you may see vertical black
bars on the left side, right side, or
both sides.
Resolution according to the output
mode
●●
Blu-ray Disc/E-contents/Digital Contents
playback
✎✎ NOTES
■■
■■
1
■■
TV Aspect Ratio
HDMI / connected
Depending on the disc type, some
aspect ratios may not be available.
If you select an aspect ratio and
option which is different than the
aspect ratio of your TV screen, the
picture might appear to be distorted.
Output
✎✎ NOTES
■■
■■
■■
When BD Wise is on, the Resolution
setting automatically defaults to BD
Wise and BD Wise appears in the
Resolution menu.
If the player is connected to a device that
does not support BD Wise, you cannot use
the BD Wise function.
For proper operation of BD Wise,
set the BD Wise menu of both the
player and the TV to On.
Resolution
Lets you set the output resolution of the
HDMI video signal to Auto, 1080p, 1080i,
720p or 576p/480p. The number indicates
the number of lines of video per frame. The
i and p indicate interlaced and progressive
scan, respectively. The more lines, the
higher the quality.
Blu-ray
Disc
E-contents/
Digital
contents
Resolution of
Blu-ray Disc
1080p
Setup
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest interconnectivity feature.
When you connect a Samsung player and
a Samsung TV with BD Wise to each other
via HDMI, and BD Wise is on in both the
player and TV, the player outputs video at
the video resolution and frame rate of the
Blu-ray Disc/DVDs.
HDMI Mode
BD Wise
Auto
Max.
Max.
Resolution of Resolution of
TV input
TV input
1080p@60F
(Movie Frame : 1080p@60F 1080p@60F
Off)
Movie Frame :
1080p@24F 1080p@24F
Auto (24 fps)
●●
1080i
1080i
720p
720p
1080i
720p
576p/480p
576p/480p
576p/480p
DVD playback
Output
Setup
HDMI / connected
HDMI Mode
BD Wise
576i/480i
Auto
Max. Resolution of TV input
1080p
1080p
1080i
1080i
720p
720p
576p/480p
576p/480p
✎✎ NOTES
■■
■■
■■
■■
If the TV you connected to the player
does not support Movie Frame or
the resolution you selected, the
message "If no pictures are shown
after selecting ‘Yes’, please wait for
15 seconds to return to the previous
resolution." appears. If you select
Yes, the TV’s screen will go blank for
15 seconds, and then the resolution
will revert to the previous resolution
automatically.
If the screen stays blank after you
have changed the resolution,
remove all discs, and then press and
hold the ^ button on the front of
the player for more than 5 seconds.
All settings are restored to the
factory default. Follow the steps on
the previous page to access each
mode and select the Display Setup
that your TV will support.
When the factory default settings
are restored, all stored user BD data
is deleted.
The Blu-ray Disc must have the 24
frame feature for the player to use the
Movie Frame (24 fps) mode.
HDMI Colour Format
Lets you set the colour space format for
HDMI output to match the capabilities of
the connected device (TV, monitor, etc).
HDMI Deep Colour
Lets you output video from the HDMI OUT
jack with Deep Colour. Deep Colour provides
more accurate colour reproduction with greater
colour depth.
Progressive Mode
Lets you improve picture quality when
viewing DVDs.
Digital Output Selection
Setup
Connection
PCM
Coaxial
Up to 7.1ch PCM 2ch
HDMI
Receiver
PCM
PCM 2ch Re-encoded DTS
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Dolby
Digital
Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby
Digital
Re-encoded DTS
Re-encoded
Dolby Digital *
DTS
Re-encoded DTS
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
DTS
Re-encoded DTS
Re-encoded
Dolby Digital *
DTS-HD
DTS-HD
PCM 2ch PCM 2ch
Master Audio
Master Audio
DTS
Re-encoded DTS
Re-encoded
Dolby Digital *
PCM 2ch
PCM 2ch
PCM 2ch
Dolby
Digital
Dolby Digital
Dolby Digital
DTS
DTS
DTS
Decodes main
feature audio and
BONUSVIEW audio
stream together
into PCM audio
and add Navigation
Sound Effects, then
re-encodes the
PCM audio into DTS
bitstream
Decodes main
feature audio
and BONUSVIEW
audio stream
together into PCM
audio and add
Navigation Sound
Effects, then reencodes the PCM
audio into Dolby
Digital bitstream
DTS-HD High
PCM 2ch PCM 2ch
Resolution Audio
PCM
PCM 2ch PCM 2ch PCM 2ch
Audio
Dolby
Stream on Dolby Digital PCM 2ch PCM 2ch
Digital
DVD
DTS
PCM 2ch PCM 2ch
DTS
Definition
for Blu-ray
Disc
Bitstream
(Re-encoded
Dolby D)
HDMI supported
HDMI Receiver
AV receiver or
or Coaxial
Coaxial
Re-encoded DTS
Dolby Digital
Dolby
PCM 2ch PCM 2ch
Plus
Digital Plus
Audio
Stream Dolby TrueHD PCM 2ch PCM 2ch Dolby TrueHD
on Blu-ray
Disc
DTS
PCM 2ch PCM 2ch
DTS
Digital Output
Coaxial
Bitstream
(Re-encoded
DTS)
Dolby
Digital
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature
to Auto allows you to adjust the player’s
HDMI output to 24 frames per second for
improved picture quality.
You can enjoy the Movie Frame (24 fps)
feature only on a TV supporting this frame
rate. You can select Movie Frame only
when the player is in the HDMI 1080p
output resolution modes.
HDMI
Receiver
Bitstream
(Unprocessed)
Dolby Digital PCM 2ch PCM 2ch Dolby Digital
Sound Settings
Lets you select the digital audio output
format that is suitable for your TV or AV
Receiver. For more details, please refer to
the Digital Output Selection table.
PCM
Any
Outputs only main
Decodes main
feature audio stream
feature audio and
so that your AV
BONUSVIEW audio receiver can decode
stream together
the audio bitstream.
into PCM audio
You will not hear
and add Navigation BONUSVIEW audio
Sound Effects.
and Navigation Sound
Effects.
**If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-- Navigation Sound Effects : When you choose a menu navigation selection, a
Navigation Sound Effect may sound. Navigation Sound Effects are different on each
Blu-ray Disc.
11
✎✎ NOTES
■■
■■
Be sure to select the correct Digital
Output or you will hear no sound or
just loud noise.
If the HDMI device (AV receiver, TV)
is not compatible with compressed
formats (Dolby Digital, DTS), the
audio signal outputs as PCM.
■■
Regular DVDs do not have
BONUSVIEW audio and Navigation
Sound Effects.
■■
Some Blu-ray Discs do not have
BONUSVIEW audio and Navigation
Sound Effects.
■■
■■
■■
If you play MPEG audio soundtracks,
the audio signal outputs as PCM
regardless of your Digital Output
selections (PCM or Bitstream).
If your TV is not compatible with
compressed multi-channel formats
(Dolby Digital, DTS), the player may
output PCM 2ch downmixed audio
even though you selected Bitstream
(either Re-encoded or Unprocessed)
in the setup menu.
If your TV is not compatible with
PCM sampling rates over 48kHz,
the player may output 48kHz
downsampled PCM audio even
though you set PCM Downsampling
to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM
signals downsampled to 48KHz before
they are outputted to an amplifier. Choose
On if your amplifier or receiver is not
compatible with a 96KHz signal.
12
Dynamic Range Control
Wired Network Settings
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio.
●● Auto : Automatically controls the
dynamic range of Dolby TrueHD audio,
based on information in the Dolby
TrueHD soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
●● Off : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
●● On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
111 In the Home menu, press the ▲▼◀▶
buttons to select Settings, and then
press the v button.
222 Press the ▲▼ buttons to select
Network, and then press the v
button.
333 Press the ▲▼ buttons to select Wired
Network Settings, and then press
the v button. The Wired Network
Settings screen appears.
Settings
SoundInternet Protocol Setup:Auto
System
Network Settings
Please contact your ISP to find out if
your IP address is static or dynamic. If it is
dynamic - and most are - we recommend
using the Auto procedure for network
setup. This is easiest and will work in the
majority of cases. If it is static, you must
use the manual set up procedure.
Network setup directions start below.
✎✎ NOTES
■■
This unit can only be connected to a
Network via a wired connection.
: 0
0
0
0
Subnet Mask
: 0
0
0
0
: 0
0
0
0
0
0
0
Gateway
Language
DNS
Security
General
Support
▶
IP Address
Network
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Wired Network Settings
Picture
DNS Server
:Auto
: 0
> Move " Select ' Return
444 In the Internet Protocol Setup field,
select Auto if it is not selected. (Press
v to select Auto, and then press v.)
555 The Auto Function acquires and fills in
the values for IP Address, Subnet Mask,
etc., automatically.
✎✎ NOTES
■■
This process can take up to five
minutes.
666 After the Network Function has
acquired 6. the network values, press
the RETURN button.
777 Select Network test, and then press v
to ensure the player has connected to
your network.
888 When the Network Test is complete,
press the RETURN twice to return to
the Main Menu.
999 If the Network Function does not
acquire the network values, go to the
directions for Manual Setup.
Manual Network Setup
Before you start manual network setup,
you need the network setting values.
To get the network setting values, contact
your ISP (Internet Service Provider) or your
network administrator.
To enter the Network Settings into your
player, follow these steps:
111 In the Home menu, press the ▲▼◀▶
buttons to select Settings, and then
press the v button.
222 Press the ▲▼ buttons to select
Network, and then press the v
button.
333 Press the ▲▼ buttons to select Wired
Network Settings, and then press
the v button. The Wired Network
Settings screen appears.
444 Select the Internet Protocol Setup field,
and then press the v button.
555 Press the ▲▼ buttons to select
Manual, and then press the v button.
666 Press the ▼ button to go to the first
entry field (IP Address).
777 Use the number buttons on your
remote to enter numbers.
888 When done with each field, use the ▶
button to move to the next field. You
can also use the other arrow buttons
to move up, down, and back.
999 Enter the IP Address, Subnet Mask,
and Gateway values in the same way.
1111Press the ▼ button to go to DNS.
1111Press the ▼ button to go to the first
DNS entry field.
✎✎ NOTES
■■
1111Enter the numbers as above.
1111Press the RETURN button on your
remote control.
1111Run a Network Test to ensure the
player has connected to your network.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to
a network and the Internet has been
established.
Device Name
Device Name function allows you to
change player's name by selecting from
device name list.
BD-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
●● Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
●● Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
●● Prohibit : No Internet connection is
allowed for any BD-LIVE content.
■■
What is a valid certificate?
When the player uses BD-LIVE to
send the disc data and a request
to the server to certify the disc, the
server uses the transmitted data to
check if the disc is valid and sends
the certificate back to the player.
The Internet connection may be
restricted while you are using BDLIVE contents.
Using BD-LIVE™
Once the player is connected to the
network, you can enjoy various movierelated service contents using a BD-LIVE
compliant disc.
111 Attach a USB memory stick to the USB jack
on the front of the player, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
222 Insert a Blu-ray Disc that supports BD-LIVE.
333 Select an item from various BD-LIVE service
contents provided by the disc manufacturer.
✎✎ NOTES
■■
The way you use BD-LIVE and
the provided contents may differ,
depending on the disc manufacturer.
The DLNA Function
DLNA lets you play music, video, and
photo files located in your PC on the
player.
To use DLNA with your player, you must
connect the player to your network.
(See page 12-13).
To use DLNA with your PC, you must install
DLNA software on your PC.
System Settings
■■
If you have Anynet+ turned on,
when you turn off the product,
disconnect, and then reconnect
the power cable, the product turns
on automatically to re-establish
the Anynet+ connection. After
about 15 seconds, it turns off again
automatically.
■■
Some Samsung TVs, when
connected to this product using
the Anynet+ function will, when
you turn them on, display a
warning popup message saying no
connection has been found. Neverthe-less, the Anynet+ connection is
properly established and available
to use.
Setup
By using the Setup function, you can set the
language, Network Settings, etc.
For more information about the Setup
function, refer to the Setup section of this
user manual (See page 9).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
✎✎ NOTES
■■
If this function is set to On, Standby
power consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung
players that have the Anynet+ feature.
To operate this function, connect this player to
an Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY
(
) button on the TV’s remote control.
For more information, please see the TV
user manual.
✎✎ NOTES
■■
This function is not available if the
HDMI cable does not support CEC.
■■
If your Samsung TV has an Anynet+
logo, then it supports the Anynet+
function.
■■
Depending on your TV, certain
HDMI output resolutions may
not work. Please refer to the user
manual of your TV.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray
disc that supports the BD-LIVE service and
stored on a flash drive.
You can check the device’s information
including the storage size, delete the BD
data, or change the Flash memory device.
✎✎ NOTES
■■
In the external memory mode, disc
playback may be stopped if you
disconnect the USB device in the
middle of playback.
■■
Your player supports the FAT16,
FAT32, and NTFS file systems. We
recommend you use USB devices
that support USB 2.0 protocol with
4 MB/sec or faster read/write speed.
■■
The Resume Play function may not
work after you format the storage
device.
■■
The total memory available to BD
Data Management may differ,
depending on the conditions.
13
DivX® Video On Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Language Settings
You can select the language you prefer for
the On-Screen menu, disc menu, audio,
and subtitles.
✎✎ NOTES
■■
The selected language will only
appear if it is supported on the disc.
Security Settings
When you access this function for the
first time, the PIN screen appears. Enter
the default PIN - 0000 - using the number
buttons. To change the PIN, use the
Change PIN function (See page 17). Each
time you access the Security Settings
hereafter, you must enter that four digit
PIN. If you don’t change the PIN, continue
using the default PIN.
BD Parental Rating
Prevents playback of Blu-ray Discs with
specific age ratings unless the 4 digit PIN is
entered.
DVD Parental Rating
This function works in conjunction with
DVDs that have been assigned an age rating
or numeric rating that indicates the maturity
level of the content. These numbers help you
control the types of DVDs that your family
can watch.
14
Select the rating level you want to set. For example, if you select Level 6, discs
rated above 6 - Level 7 and 8 - will not
play.
A larger number indicates more mature
content.
When the DVD Parental Rating function is
on, you must enter the 4 digit PIN to play
discs with restricted rating levels.
Change PIN
Change the 4-digit password used to
access security functions.
To change the PIN, follow these steps:
111 Select Change PIN, and then press the
v button. The Enter old PIN screen
appears.
222 Enter the old PIN. If you never changed
the PIN, enter the default PIN: 0000. The Enter new PIN screen appears.
333 Enter the new PIN in the Enter new PIN
fields.
444 Re-enter the new PIN in the Confirm
new PIN fields. The "PIN is changed
successfully." message appears.
555 Press the v button.
If you forget your password
111 Remove any discs.
222 Press and hold the ^ button on the
front panel for 5 seconds or more.
All settings will revert to the factory
settings.
General Setting
When the factory default settings
are restored, all the user stored BD
data will be deleted.
Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during a software upgrade.
■■
No disc should be in the product
when you upgrade the software By
Online.
Time Zone
Lets you specify the time zone that is
applicable to your area.
Support Settings
Software Upgrade
The Software Upgrade menu allows
you to upgrade the player’s software for
performance improvements or additional
services.
By Online
To upgrade By Online, follow these steps:
111 In the player’s menu, go to Settings >
Support > Software Upgrade.
222 Select By Online, and then press the
v button. The Connecting to Server
message appears.
333 A popup message will appear if an
update is available.
444 If you select Yes, download process
started. (Never turn the player on
during an upgrade.)
555 When the update is completed, the
player will restart automatically.
By USB
To upgrade by USB, follow these steps:
111 Visit www.samsung.com/
bluraysupport.
222 Download the latest USB software
upgrade zip archive to your computer.
333 Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
444 Copy the RUF file to a USB flash drive.
555 Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
666 In the player’s menu, go to Settings >
Support > Software Upgrade.
777 Select By USB.
✎✎ NOTES
■■
■■
✎✎ NOTES
■■
The upgrade is complete when the
player turns off, and then turns on
again by itself.
■■
■■
Never turn the player off or back
on manually during the update
process.
■■
✎✎ NOTES
■■
■■
No disc should be in the product
when you upgrade the software
using the USB Host jack.
When the software upgrade is
done, check the software details in
the software Upgrade menu.
Do not turn off the player during the
software upgrade. It may cause the
player to malfunction.
Software upgrades using the USB
Host jack must be performed with a
USB flash memory stick only.
Auto Upgrade Notification
Contact Samsung
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version
is available for the player.
To set Auto Upgrade Notification on,
follow these steps:
111 Select Auto Upgrade Notification, and
then press the v button.
222 Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup
message.
Provides contact information for assistance
with your player.
111 To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player
on or off manually during an upgrade.)
222 The update progress popup appears.
333 When the update is completed, the
player will restart automatically.
✎✎ NOTES
■■
■■
■■
The upgrade is complete when the
player turns off, and then turns on
again by itself.
Never turn the player off or on
manually during the update process.
Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during software upgrade.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
Reset
Returns all settings to their factory defaults
except for the network settings.
Media Play
Playing a Commercially Recorded
Disc
111 Press the 8 button to open the disc
tray.
222 Place a disc gently into the disc tray
with the disc's label facing up.
333 Press the 8 button to close the disc
tray. Playback starts automatically.
Playing Files on a USB Device
There are two methods you can use to
play or view multimedia files located on a
USB device through your player.
Method 1
222 Connect the USB device to the USB
port on the front panel of the player.
The New Device Connected pop-up
appears.
Photos
✎✎ NOTES
■■
Even though the player will display
folders for all content types, it will only
display files of the Content Type you
selected in Step 3. For example, if you
selected music, you will only be able
to see music files. You can change this
selection by returning to the Photos,
Videos & Music screen and going to
Step 3 in Method 2 below.
444 If necessary, use the ▲▼◀▶ buttons
to select a folder, and then press the
v button.
111 Turn the player on.
Play disc
333 Use the ▲▼ buttons to select Photos,
Videos or Music, and then press the v
button. The Photos, Videos & Music
screen appears listing the content of
the device. Depending on how the
contents is arranged, you will see either
folders, individual files, or both.
Videos
Music
New device connected.
123
555 Select a file to view or play, and then
press the v button.
666 Press the RETURN button to exit a
folder or the EXIT button to return to
the Home screen.
777 Go to pages 16~18 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
Photos
Videos
No Disc
Method 2
Music
> Move " Enter ' Return
App 1 App 2
App 3
App 4
App 5
More
Change Device
Settings
✎✎ NOTES
■■
If the pop-up does not appear, go to
Method 2.
111 Turn the player on.
222 Connect the USB device to the USB
port on the front panel of the player.
Select Change Device and then press
the ▲▼ button to select USB. Press the
v button.
15
Play disc
Photos
Videos
Change Device
Music
✎✎ NOTES
■■
No Disc
123
a
If you insert a disc when playing
a USB device, the device mode
changes to "Disc" automatically.
No Disc
Close
App 1 App 2
App 3
App 4
App 5
More
Change Device
Settings
333 Use the ▲▼◀▶ buttons to select
Photos, Videos or Music on the
Home screen, and then press the v
button. The Photos, Videos & Music
screen appears listing the content of
the device. Depending on how the
contents is arranged, you will see either
folders, individual files, or both.
✎✎ NOTES
■■
Even though the player will display
folders for all content types, it will
only display files of the Content Type
you selected in Step 3. For example,
if you selected music, you will only
be able to see music files. You can
change this selection by returning to
the Photos, Videos & Music screen
and repeating Step 3.
444 If necessary, use the ▲▼◀▶ buttons
to select a folder, and then press the
v button.
555 Use the ▲▼◀▶ buttons to select a file
to view or play, and then press the v
button.
666 Press the RETURN button to exit a
folder or the EXIT button to return to
Home screen.
777 Go to pages 16~18 for instructions
that explain how to control playback of
videos, music, and pictures on a USB
device.
16
Playing a Disc with User Recorded
Content
666 Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
777 Go to pages 16~18 for instructions
that explain how to control playback of
videos, music, and pictures on a disc.
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
111 Place a user recorded disc into the disc
tray with the disc’s label facing up, and
then close the tray.
222 Use the ◀▶ buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
✎✎ NOTES
■■
Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 2. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Home screen and
repeating Step 2.
333 A screen appears listing the contents
of the disc. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
444 If necessary, use the ▲▼◀▶ buttons
to select a folder, and then press the
v button.
555 Use the ▲▼◀▶ buttons to select a file
to view or play, and then press the v
button.
Using DLNA
PC
Blu-ray Disc Player
Play back PC's
files
DLNA Connection
111 Connect the Blu-ray Disc Player, your
PC, and/or your DLNA compatible
device to the same network.
222 Follow the directions in the DLNA
software Installation/Instruction
manual to set up devices and files for
playing or viewing.
333 Select Change Device on the player's
Home screen, and then press the v
button. In the list of DLNA connected
devices that appears, select your PC
or other DLNA compatible device, and
then press the v button.
444 Use the ◀▶ buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
✎✎ NOTES
■■
Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 4. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Home screen and
repeating Step 4.
555 A screen appears listing the contents
of the PC or DLNA device. Depending
on how the contents are arranged, you
will see either folders, individual files,
or both.
666 If necessary, use the ▲▼◀▶ buttons
to select a folder, and then press the
v button.
777 Use the ▲▼◀▶ buttons to select a file
to view or play, and then press the v
button.
888 Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
999 Go to pages 16~18 for instructions
that explain how to control playback of
videos, music, and pictures on a disc.
Controlling Video Playback
You can control the playback of video
content located on a Blu-ray disc, DVD,
CD, USB device, or your computer.
Depending on the media, some of the
functions described in this manual may not
be available.
During Blu-ray or DVD disc playback, the
Full screen button does not operate.
Buttons on the Remote Control
used for Video Playback
2
1
AUDIO
HOME
SUBTITLE
Using the disc menu, title menu,
popup menu, and title list
DISC MENU
button
During playback, press this button
to start the disc menu function.
TITLE MENU
button
During playback, press this button
to start the title menu function.
POPUP MENU During playback, press this button
to start the popup menu function.
button
Playback related buttons
The player does not play sound in Search,
Slow or Step mode.
●● To return to normal speed playback,
press the 6 button.
6 button
BONUS
REPEAT
REPEAT
FULL
Starts playback.
VIEW
A-B
SCREEN
5 button
Stops playback.
7 button
Pauses playback.
Fast Motion
Play
During playback, press the
3 or 4 button. Each
time you press the 3 or
4 button, the playback
speed will change.
In pause mode, press the
button. Each time
Slow Motion 4
you press the 4 button,
Play
the playback speed will
change.
In pause mode, press the
Step Motion 7 button. Each time you
press the 7 button, a
Play
new frame appears.
Skip Motion
Play
During playback, press the 1
or 2 button. Each time you
press the 1 or 2 button, the
disc moves to the previous or
next chapter or file.
4
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or
4 button.
Each time you press the 3 or 4
button, the playback speed will
change.
5
Pause : Pauses a track.
6
6 button : Plays the currently
selected track.
Playlist
111 To move to the Music List, press the 5
or RETURN button.
The Music List screen appears.
1/2 Page
Music TRACK 001
TRACK 001
TRACK 002
02:38
02:38
TRACK 003
TRACK 004
02:38
02:38
TRACK 005
TRACK 006
02:38
02:38
TRACK 007
TRACK 008
02:38
02:38
TRACK 010
TRACK 009
Controlling Music Playback
You can control the playback of music
located on a Blu-ray disc, DVD, CD, USB
device, or your computer.
Repeat an Audio CD (CD-DA)/
MP3
111 During Playlist playback, press the
TOOLS button.
Buttons on the Remote Control
used for Music Playback
TRACK 001
Playlist
1/6
Tools
TRACK 001
Repeat Mode
? Off 05:57
\
Rip TRACK 002
04:27
> Move < Adjust ' Return
TRACK 003
04:07
TRACK 004
+
1
00:08 / 05:57
03:41
TRACK 005
03:17
TRACK 006
03:35
CD
" Pause c Select
Tools ' Return
4
2
3
1
2
AUDIO
SUBTITLE
NUMBER buttons (Audio CD (CDDA) only) : During Playlist playback,
press the desired track number.
The selected track is played.
Skip : During playback, press the
1 or 2 button to move to the
previous or next file of the playlist.
BONUS
VIEW
3
HOME
5
6
REPEAT
A-B
REPEAT
FULL
SCREEN
5 button : Stops a track.
02:38
02:38
222 Press the ◀▶ buttons to select Track,
All, Shuffle, or Off.
333 Press the v button.
Songs are played in the
order in which they
were recorded.
Off
(
)Track
The current song is
repeated.
(
)All
All songs are repeated.
(
) Shuffle
Shuffle plays songs in
random order.
CD a Change Device
c Select
Tools ( ) Jump to Page ' Return
222 Press the ▲▼◀▶ buttons to move
to a desired track, and then press the
YELLOW (C) button. A check appears
on the track.
Repeat this procedure to select
additional tracks.
333 To remove a track from the list, move
to the track, and then press the
YELLOW (C) button again.
The check on the track is cancelled.
444 When done, press the v button.
The tracks you selected are displayed
on the right side of the screen. The
player plays the first track.
555 To change the play list, press the 5
button or RETURN button to return to
the Music List. Repeat Steps 2, 3, and 4.
666 To cancel the play list and return to
the Home screen, press the RETURN or
EXIT button.
✎✎ NOTES
■■
■■
You can create a playlist with up to
99 tracks on Audio CDs (CD-DA).
If you remove all the tracks from
a play list and then press the v
button, the player lists and plays all
the tracks on the disc.
17
Ripping
■■
Lets you copy audio files contents from an
Audio CD (CD-DA) to USB/HDD device.
111 Open the disc tray. Place the audio
(CD-DA) disc on the tray, and close the
tray. Insert a USB device into the USB
jack on the front of the product.
222 In Stop mode, press the ▲▼◀▶
buttons to move to a desired track, and
then press the YELLOW (C) button. A
check appears on the track.
Repeat this procedure to select
additional tracks.
333 To remove a track from the list, move
to the track, and then press the
YELLOW (C) button again.
The check on the track is cancelled.
444 When done, press the TOOLS button
and then select the Rip using the
▲▼ buttons. and then press the v
button. The Rip pop-up appears.
On the Ripping screen, you can also
choose Select All and Deselect All.
-- Use Select All to select all tracks.
This cancels your individual track
selections.
-- Use Deselect All to deselect all
selected tracks at once.
Disc Copy to USB
Lets you copy video/photo/music contents
from data Disc to USB/HDD device.
111 Open the disc tray. Place the data disc
on the tray, and close the tray. Insert
a USB device into the USB jack on the
front of the product. The new device
pop-up appears.
222 Press the ▲ button, and then press the
◀▶ buttons to select Blu-ray, DVD or CD.
555 Use the ▲▼ buttons to select the
device to store the ripped files, and
then press the v button.
333 Use the ▲▼ buttons to select Photos,
Videos or Music, and then press the v
button. The Photos, Videos & Music
screen appears listing the content of
the device. Depending on how the
contents is arranged, you will see either
folders, individual files, or both.
✎✎ NOTES
✎✎ NOTES
■■
Do not disconnect the device while
ripping is in progress.
666 If you want to cancel ripping, press the
v button and then select Yes. Select
No to continue ripping.
777 When ripping is complete, the "Ripping
completed." message appears. Press
the v button to go back to the
Playback screen.
✎✎ NOTES
■■
18
This function may not be supported
by some discs.
■■
Even though the player will display
folders for all content types, it will
only display files of the Content Type
you selected in Step 3. For example,
if you selected music, you will only
be able to see music files. You can
change this selection by returning to
the Photos, Videos & Music screen
and repeating Step 3.
444 In Stop mode, use the ▲▼◀▶ buttons
to select the Videos, Photos, or
Music, and then press the YELLOW (C)
button. A check appears to the left of
the desired item.
Playing Photo Contents
555 Repeat Step 4 to select and check
additional desired item.
666 To remove the desired item from the
list, press the YELLOW (C) button
again.
The check on the desired item is
removed.
You can control the playback of photo
content located on a Blu-ray disc, DVD,
CD, USB device, or your computer.
777 When done, press the TOOLS button
and then select the Copy to USB using
the ▲▼ buttons. and then press the
v button. The Copy to USB pop-up
appears.
During playback, press the TOOLS button.
Using the Tools Menu
Start Slide
Show/ Stop
Slide Show
Select to start or stop the
slide show.
Slide Show
Speed
Select to set a slide show's
speed.
Background
Music
Select to listen to music
while viewing a slide
show.
999 If you want to cancel copying, press
the v button and then select Yes.
Select No to continue copying.
Zoom
Select to enlarge the
current picture. (Enlarge
up to 4 times)
1111When copying is complete, the
"Copying completed." message
appears. Press the v button to go
back to the Playback screen.
Rotate
Select to rotate the picture.
(This will rotate the picture
either clockwise or counter
clockwise.)
Information
Shows the picture information.
888 Use the ▲▼ buttons to select the
device to store the copied files, and
then press the v button.
✎✎ NOTES
■■
Do not disconnect the device while
copying is in progress.
✎✎ NOTES
■■
This function may not be supported
by some discs.
■■
On the Copying screen, you can
also choose Select All and Deselect
All.
-- Use Select All to select all item.
This cancels your individual item
selections.
-- Use Deselect All to deselect all
selected item at once.
✎✎ NOTES
■■
Depending on the disc or storage
device, the Tools menu may differ.
■■
To enable the background music
function, the photo file must be
in the same storage media as the
music file.
However, the sound quality can be
affected by the bit rate of the MP3
file, the size of the photo, and the
encoding method.
■■
You can't enlarge the subtitle and
PG graphic in the full screen mode.
Appendix
PROBLEM
Forgot password
SOLUTION
●●
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM
No operation can be
performed with the
remote control.
SOLUTION
●●
●●
●●
Disc does not play.
Check the batteries in the remote control. They may need replacing.
Operate the remote control at a distance of no more than
6.1m from the player.
Remove batteries and hold down one or more buttons
for several minutes to drain the microprocessor inside the
remote control to reset it. Reinstall batteries and try to
operate the remote control again.
●●
Ensure that the disc is installed with the label side facing up.
Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not
appear.
●●
Ensure that the disc has disc menus.
The prohibition
message appears on
the screen.
●●
This message appears when an invalid button is pressed.
The Blu-ray Disc/DVD’s software doesn’t support the
feature (e.g., angles).
You’ve requested a title or chapter number or search time
that is out of range.
●●
●●
●●
●●
The picture is noisy or
distorted
●●
No HDMI output.
●●
●●
●●
If random noise appears on the screen, it means that TV
does not support HDCP (High-bandwidth Digital Content
Protection).
If you experience
other problems.
●●
Go to the contents and find the section of the user
manual that contains the explanations regarding the
current problem, and follow the procedure once again.
If the problem still cannot be solved, please contact your
nearest Samsung authorised service centre.
●●
DLNA function
●●
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio
cannot be changed.
●●
The Screen Ratio is fixed on your Blu-ray Disc/DVD.
This is not a problem with the player.
Video is played
intermittently.
●●
No audio.
●●
Make sure you have selected the correct Digital Output in
the Audio Options Menu.
●●
If the HDMI output is set to a resolution your TV cannot support
(for example, 1080p), you may not see a picture on your TV.
Press the ^ button (on front panel) for more than 5
seconds with no disc inside. All settings will revert to the
factory settings.
When the factory default settings are restored, all stored
user BD data is deleted.
ADLNA connection
between Player and
PC is unstable.
●●
The screen is blank.
●●
Check the connection between the TV and the HDMI jack
of the player.
Check if your TV supports 576p/480p, 720p, 1080i, or
1080p HDMI input resolutions.
●●
Play mode differs from the
Setup Menu selection.
●●
Make sure that the disc is not dirty or scratched.
Clean the disc.
Abnormal HDMI
output screen.
I can see folders shared
through DLNA, but I
cannot see the files.
●●
Press the ^ button (on front panel) for more than 5
seconds with no disc inside. All settings including the
password will revert to the factory settings.
Don’t use this unless absolutely necessary.
When the factory default settings are restored, all stored
user BD data is deleted.
●●
DLNA shows only files corresponding to the Image, Music,
and Movie categories. Files that do not correspond to
these categories are not displayed.
Check if the network is stable.
Check if the network cable is properly connected and if
the network is overloaded.
●●
●●
The IP address under the same subnetwork should be
unique. If they are not, IP interference can cause this
phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
19
PROBLEM
Specifications
SOLUTION
BD-LIVE
I cannot connect to
the BD-LIVE server.
●●
●●
●●
●●
●●
When using the BDLIVE service, an error
occurs.
●●
Check whether the network connection is working or not
by using the Network Status menu.
Check whether the USB memory device is connected to
the player.
The memory device must have at least 1GB of free space
to accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
Check whether the BD-LIVE Internet Connection menu is
set to Allow(All).
If all above fails, contact the contents provider or update
the player to the latest firmware.
The memory device must have at least 1GB of free space
to accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
✎✎ NOTES
■■
If you contact us to repair your player, an administration fee may be charged if either:
111 An engineer is called out to your home at your request and there is no defect in the
product.
222 You bring the unit to a repair centre and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home
visit or begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at
www.samsung.com, or contact Samsung Customer Care before seeking to repair your
player.
1.0 Kg
Dimensions
290 (W) X 221 (D) X 39 (H) mm
Operating Temperature
Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Type A
USB 2.0
DC output
5V 0.5A Max.
Video
2D : 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
Audio
PCM, Bitstream
Digital Audio Output
Coaxial
Ethernet
100BASE - TX Terminal
USB
HDMI
When the factory default settings are restored, all stored user BD data is deleted.
Repairs
20
General
Weight
Audio
Output
Network
-- Network speeds equal to or below 10Mbps are not supported.
-- Design and specifications are subject to change without prior notice.
-- For the power supply and power consumption, refer to the label attached to the
player.
-- Weight and dimensions are approximate.
Compliance and Compatibility Notice
NOT ALL discs are compatible
●● Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that
can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD
(CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
●● Discs other than those listed above cannot be and are not intended to be played by
this player. Some of the discs listed above may not play due to one or more reasons
provided below.
●● Samsung cannot assure that this player will play every disc bearing the BD-ROM, BDRE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player
may not respond to all operating commands or operate all features of every disc.
These and other disc compatibility and player operation issues with new and existing
format discs are possible because:
‐‐ Blu-ray is a new and evolving format and this player may not operate all features
of Blu-ray Discs because some features may be optional, additional features may
have been added to the Blu-ray Disc format after the production of this player, and
certain available features may be subject to delayed availability;
‐‐ not all new and existing disc format versions are supported by this player;
‐‐ new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
‐‐ some discs are produced in a manner that allows specific or limited operation or
restricts features during playback;
‐‐ some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
‐‐ some discs may not be played depending on their physical state or recording
conditions;
‐‐ problems and errors can occur during the creation of Blu-ray Disc or DVD software
and/or the manufacture of discs;
‐‐ this player operates differently than a standard DVD player or other AV equipment;
and/or
‐‐ for reasons noted throughout this user manual and for other reason(s) discovered
and posted by SAMSUNG customer care centre.
●● If you encounter disc compatibility or player operation problems, please contact
SAMSUNG customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this
player.
●● For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and
Before Playing sections of this user manual.
●●
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
●●
●●
●●
●●
Because AACS (Advanced Access Content System) is approved as the content
protection system for the Blu-ray Disc format, similar to use of CSS (Content Scramble
System) for the DVD format, certain restrictions are imposed on playback, analogue
signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending
on your time of purchase as those restrictions may be adopted and/or changed by
AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems for the Blu-ray Disc format, which
imposes certain restrictions including playback restrictions for BD-ROM Mark and/or
BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact SAMSUNG customer care centre.
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you
should only connect your Player directly to your TV, not to a VCR. Connecting to a
VCR results in a distorted picture from copy-protected Blu-ray Disc/DVDs.
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
recording, use, display, distribution, or revision of television programs, videotapes,
Blu-ray Discs, DVDs, and other materials may subject you to civil and/or criminal
liability.
Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks.
When a prohibited use of an unauthorised copy is detected, a message will be
displayed and playback or copying will be interrupted. More information about
Cinavia technology is provided at the Cinavia Online Consumer Information Centre
at http://www.cinavia.com. To request additional information about Cinavia by mail,
send a postcard with your mailing address to: Cinavia Consumer Information Centre,
P.O. Box 86851, San Diego CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance
Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide
patents issued and pending as well as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright
2004-2013 Verance Corporation. All rights reserved by Verance. Reverse engineering
or disassembly is prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may
not use any content or services in a manner that has not been authorised by the content
owner or service provider. Without limiting the foregoing, unless expressly authorised by
the applicable content owner or service provider, you may not modify, copy, republish,
upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in
any manner or medium any content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY,
VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE
MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES,
INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT
OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT
OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT
OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality
of this disclaimer, Samsung expressly disclaims any responsibility or liability for any
interruption or suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be
made directly to the respective content and service providers.
Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
●●
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, and DTS 2.0+Digital Out is
a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
DivX
®
‐‐ ABOUT DIVX VIDEO: DivX is a digital video format created by
DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX
Certified® device that has passed rigorous testing to verify that it plays DivX video.
Visit divx.com for more information and software tools to convert your files into
DivX videos.
®
‐‐ ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
®
®
‐‐ DivX Certified to play DivX video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668;
7,515,710; 7,519,274.
●●
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
●●
Oracle and Java are registered trademarks of Oracle and/or its
affiliates. Other names may be trademarks of their respective
owners.
●●
Open Source Licence Notice
‐‐ In the case of using open source software, Open Source Licences are available on
the product menu.
●●
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
●●
Licence
●●
●●
2.0+Digital Out
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
UNITED KINGDOM
This Samsung product is warranted for the period of twelve (12) months from the
original date of purchase, against defective materials and workmanship. In the event
that warranty service is required, you should return the product to the retailer from
whom it was purchased.
However, Samsung Authorised Dealers and Authorised Service Centres in other EC
Countries will comply with the warranty on the terms issued to purchasers in the
country concerned.
In case of difficulty, details of our Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd
Samsung Customer Support Centre
Selectapost 38, Sheffield, S97 3FJ
United Kingdom
United Kingdom
Tel : 0330 SAMSUNG (7267864)
www.samsung.com/uk/support
EIRE
Tel : 0818 717100
www.samsung.com/ie/support
■■ WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card
is fully and properly completed and is presented with the original invoice or sales
slip or confirmation, and the serial number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of
the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or
Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers
and, any such repair work and damage to the products caused by such repair
work will not be covered by this warranty.
EIRE
4. This product is not considered to be defective in materials nor workmanship by
reason that it requires adaptation in order to conform to national or local technical
or safety standards in force in any Country other than the one for which the
product was originally designed and manufactured. This warranty will not cover,
and no re-imbursement will be made for such adaptation nor any damage which
may result.
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or replacement of parts
due to normal wear and tear.
b) Cost relating to transport, removal or installation of the product.
c) Misuse, including the faiure to use this product for its normal purposes
or incorrect installation.
d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public
Disturbances, incorrect mains voltage, improper ventilation or any
other cause beyond the control of Samsung.
6. This warranty is valid for any person who legally acquired possession of the
product during the warranty period.
7.The consumers statutory rights in any applicable national legislation whether
against the retailer arising from the purchase contract or otherwise are not
affected by this warranty. Unless there is national legislation to the contrary, the
rights under this warranty are the consumers sole rights and Samsung, its
subsidiaries and distributors shall not be liable for indirect or consequential loss or
any damage to records, compact discs, videos or audio taper or any other related
equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with
separate battery return systems.)
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact
the SAMSUNG customer care centre.
AUSTRIA
Area
BELGIUM
BOSNIA
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
Contact Centre 
0800 - SAMSUNG (0800 - 7267864)
02-201-24-18
SERBIA
SLOVAKIA
SPAIN
SWEDEN
051 331 999
07001 33 11 , sharing cost
062 726 786
800 - SAMSUNG (800-726786)
70 70 19 70
030-6227 515
01 48 63 00 00
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
800-SAMSUNG (800.7267864)
261 03 710
020 405 888
080 697 267
090 726 786
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
815 56480
0 801-172-678* lub +48 22 607-93-33 **
*(całkowity koszt połączenia jak za 1 impuls według taryfy operatora)
** (koszt połączenia według taryfy operatora)
808 20 7267
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
011 321 6899
0800 - SAMSUNG(0800-726 786)
0034902172678
0771 726 7864 (SAMSUNG)
U.K
EIRE
LITHUANIA
LATVIA
ESTONIA
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
GERMANY
CYPRUS
GREECE
HUNGARY
ITALIA
LUXEMBURG
MONTENEGRO
SLOVENIA
NETHERLANDS
NORWAY
POLAND
PORTUGAL
ROMANIA
SWITZERLAND
0848 726 78 64 (0848-SAMSUNG)
Web Site
www.samsung.com/at/support
www.samsung.com/be/support (Dutch)
www.samsung.com/be_fr/support (French)
www.samsung.com/support
www.samsung.com/bg/support
www.samsung.com/hr/support
www.samsung.com/cz/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/fr/support
www.samsung.com/de/support
www.samsung.com/gr/support
http://www.samsung.com/hu/support
www.samsung.com/it/support
www.samsung.com/support
www.samsung.com/support
www.samsung.com/si/support
www.samsung.com/nl/support
www.samsung.com/no/support
www.samsung.com/pl/support
www.samsung.com/pt/support
www.samsung.com/ro/support
www.samsung.com/rs/support
www.samsung.com/sk/support
www.samsung.com/es/support
www.samsung.com/se/support
www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
www.samsung.com/uk/support
www.samsung.com/ie/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to
human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
AK68-02593A-00
AK68-02593A-00