Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
User manual
BT6000
Contents
1Important
2
2 Your Bluetooth speaker
3
Introduction3
What's in the box
3
Overview of the speaker
4
3 Get started
5
5
6
6
4 Use Bluetooth devices
Connect a device
Play from Bluetooth device
Control your phone call
Disconnect a device
Reconnect a device
7
7
8
8
8
8
5 Listen to an external device
9
Power supply
Turn on/off
Adjust volume
6 Product information
Specifications
10
10
7Troubleshooting
11
General11
About Bluetooth device
11
8Notice
12
Compliance12
Care of the environment
12
Trademark notice
13
EN
1
1Important
Warning
•• Never remove the casing of this speaker.
•• Never place this speaker on other electrical equipment.
•• Keep this speaker away from direct sunlight, naked
flames or heat.
•• Make sure that you always have easy access to the
power cord, plug, or adaptor to disconnect the speaker
from the power.
•
•
•
•
•
•
•
2
Make sure that there is enough free space
around the speaker for ventilation.
After use under humid circumstance,
immediately clean the product with a soft
dry cloth.
The battery shall not be exposed to
excessive heat such as sunshine, fire or the
like.
The adapter shall not be exposed to
dripping or splashing.
No objects filled with liquids shall be
placed on the adapter.
Use only power supplies listed in the user
manual.
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
EN
2 Your Bluetooth
speaker
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
This speaker has passed splash-proof test
(IPX4) and can be used near water.
With this speaker, you can enjoy audio from
Bluetooth-enabled devices or other external
devices.
What's in the box
Check and identify the contents of your
package:
Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
Short user manual
•
•
•
•
•
Speaker
USB cable for charging
USB adapter head
Short user manual
Safety and notice leaflet
EN
3
Overview of the speaker
b
a
cd
a PAIRING
• Enter Bluetooth pairing mode.
• Disconnect Bluetooth connection.
• Answer or reject an incoming call.
• End the current phone call.
• Transfer the call to your mobile device.
b NFC
• Connect a NFC compatible device
through Bluetooth.
c
• Charge the built-in battery.
d AUDIO IN
• Connect an external audio device.
e Volume knob ( )
• Adjust volume.
• Turn the speaker on or off.
4
EN
e
3 Get started
Always follow the instructions in this chapter in
sequence.
Power supply
Either AC power or battery can be used as
power supply of this product.
Option 1: Battery power
The speaker can operate on the built-in
rechargeable battery.
Note
•• Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
•• It takes approximately three hours to fully charge the
battery.
•• The red LED indicator flashes when the battery is low.
To recharge the built-in battery:
• Connect the speaker to AC power supply;
or
• Connect the USB cable between
• the
socket on the speaker, and
• a USB socket on a computer.
LED indicator
Solid red
Off
Battery status
Under charging
Fully charged
Option 2: AC power
Caution
•• Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
•• Risk of electric shock! When you unplug the AC adapter,
always pull the plug from the socket. Never pull the cord.
•
Connect the adapter to:
• the
socket on the speaker.
• the power outlet.
EN
5
Turn on/off
ON
OFF
•
To turn the speaker on or off, rotate the
knob clockwise or anticlockwise until you
hear a click.
»» When the speaker is turned on, the
blue LED indicator flashes.
»» When the speaker is turned off, the
blue LED indicator lights off, and the
and the icons are towards the same
direction.
Note
•• If the battery level is low, the red LED indicator flashes.
6
EN
Switch to standby mode
•
The speaker switches to standby mode in
the following situations:
• The connection with Bluetooth
device or other device is invalid for 15
minutes; or
• Music playback is stopped for 15
minutes.
Adjust volume
•
During play, rotate the knob to increase or
decrease volume.
4 Use Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices and control the
incoming call through Bluetooth.
Connect a device
3
Tap the NFC tag on the top of the speaker
with the NFC area of your Bluetooth
device.
Note
•• The speaker can memorize a maximum of four paired
devices. The fifth paired device will replace the first one.
•• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•• Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•• Keep away from any other electronic device that may
cause interference.
•• Make sure that no audio input cable is connected to
the AUDIO IN socket.
4
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1
2
Enable NFC on your Bluetooth device
(refer to its user manual).
Turn on the speaker.
»» The blue LED indicator flashes.
Follow the on-screen instructions to
complete the pairing and connection.
»» After successful connection, the
speaker beeps twice, and the LED
indicator turns solid blue.
Option 2: Connect a device manually
Note
•• The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
the device).
Turn on the speaker.
»» The blue LED indicator flashes.
EN
7
3
Select [Philips BT6000] displayed on your
device for pairing. If necessary, input “0000”
as the pairing password.
»» After successful connection, the
speaker beeps twice, and the LED
indicator turns solid blue.
LED indicator
Description
Flashing blue
Connecting;
Waiting for pairing
Connected
Solid blue
Disconnect a device
•
•
•
Press and hold PAIRING for three seconds
when there is no incoming call;
Disable Bluetooth on your device; or
Move the device beyond the
communication range.
»» The speaker beeps twice, and the blue
LED indicator flashes.
Note
Play from Bluetooth device
•• Before connecting another Bluetooth device, disconnect
the current device first.
Note
•• If there is an incoming call on the connected mobile
phone, music play pauses.
After successful Bluetooth connection, play
audio on the Bluetooth device.
»» Audio streams from your Bluetooth
device to the speaker.
Control your phone call
After Bluetooth connection, you can control an
incoming call with this speaker.
Button
Function
Press to answer an incoming call.
Press and hold for three seconds to
reject an incoming call.
During a call, press to end the current
call.
During a call, press and hold for three
seconds to transfer the call to your
mobile device.
8
EN
Reconnect a device
When you turn on the speaker, it will reconnect
the last connected device automatically; If not,
select [Philips BT6000] on your Bluetooth
device to start connection.
5 Listen to an
external device
With this speaker, you can also listen to an
external audio device such as an MP3 player.
Note
•• Make sure that music playback through Bluetooth is
stopped.
1
2
3
Open the protective cover on the left of
the speaker.
Connect an audio input cable (not
supplied) with a 3.5 mm connector on
both ends to
• the AUDIO IN socket on this speaker,
and
• the headphone socket on the external
device.
Play audio on the external device (refer to
its user manual).
EN
9
6Product
information
General information
Power Supply
- AC Power (power
adapter)
Note
•• Product information is subject to change without prior
notice.
- Built-in Battery
Specifications
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Audio In
2 X 5W RMS
40 -20000 Hz, ±3 dB
> 65 dBA
600 mV (RMS), 22 kohm
Speaker
Speaker Impedance
Speaker Driver
Sensitivity
8 ohm
1.5 inch full range
>85dB/m/W±
2dB/m/W
Bluetooth
Bluetooth Version
Supported Profiles
Range
10
EN
V4.0
HFP, A2DP, AVRCP
10 m (Free space)
Standby Power
Consumption
Eco Standby Power
Consumption
Dimensions - Main
Unit (W x H x D)
Weight - Main Unit
Brand name: PHILIPS;
Model: AKN2G0500200VU;
Input: 100-240 V~,
50/60 Hz, 0.35 A;
Output: 5 V 2 A;
Li-ion battery (3.7 V,
4400 mAh)
<1 W
<0.5 W
188 x 70 x 71 mm
0.5 kg
7Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
General
Fail to find [Philips BT6000] on your device
for pairing.
•• Press and hold PAIRING for three seconds,
and then try again.
Cannot connect with the device.
•• The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
•• This product is already connected with
another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects
constantly.
•• The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
•• For some devices, Bluetooth connection
may be deactivated automatically as a
power-saving feature. This does not indicate
any malfunction of this product.
No power
•• Make sure that the AC power plug of the
unit is connected properly.
•• Make sure that there is power at the AC
outlet.
•• Recharge your speaker.
No sound
•• Adjust volume on this product.
•• Adjust volume on the connected device.
•• Make sure that your Bluetooth device is
within the effective operational range.
No response from the speaker
•• Disconnect and reconnect the power plug,
then turn on the speaker again.
•• Recharge the speaker.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
•• The Bluetooth reception is poor. Move the
device closer to this product or remove
any obstacle between them.
EN
11
8Notice
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Compliance
Hereby, WOOX Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC. You can find the
Declaration of Conformity on www.philips.com/
support.
This product is designed to be waterproof in
compliance with IEC 60529 IPX4.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
12
EN
This symbol means that the product contains
a built-in rechargeable battery covered by
European Directive 2013/56/EU which cannot
be disposed of with normal household waste.
We strongly advise you to take your product to
an official collection point or a Philips service
centre to have a professional remove the
rechargeable battery.
Inform yourself about the local separate
collection system for electrical and electronic
products and rechargeable batteries. Follow
local rules and never dispose of the product
and rechargeable batteries with normal
household waste. Correct disposal of old
products and rechargeable batteries helps
prevent negative consequences for the
environment and human health.
Caution
•• Removal of the built-in battery invalidates the warranty
and may destroy the product.
Always bring your product to a professional to
remove the built-in battery.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademark notice
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
This is CLASS II apparatus with double
insulation, and no protective earth provided.
EN
13
Specifications are subject to change without notice.
2015 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
BT6000_12_UM_V1.0