Owner's Manual
LG Minibeam Pro
DLP Projector
Please read the safety information carefully before using this product.
PF1500
www.lg.com
2
LICENSES
LICENSES
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
This DivX Certified® device has passed rigorous
testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your
device at vod.divx.com. Find your registration
code in the DivX VOD section of your device
setup menu.
DivX Certified® to play DivX® video up to HD
1080p, including premium content.
DivX®, DivX Certified® and associated logos are
trademarks of DivX, LLC and are used under
license.
Covered by one or more of the following U.S.
patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
LICENSES
This device meets the EMC requirements for home appliances (Class
B) and is intended for home usage. This device can be used in all
regions.

NOTE
• Image shown may differ from your projector.
• Your projector’s OSD (On Screen Display) may differ slightly from
that shown in this manual.
3
4
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
Please take note of the safety instructions to prevent any potential accident
or misuse of the projector.
• Safety precautions are given in two forms, i.e., WARNING and CAUTION
as detailed below.
WARNING Failure to follow the instructions may cause serious
injury and even death.
CAUTION Failure to follow the instructions may cause personal
injury or product damage.
• Read the owner's manual carefully and keep it on hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point
within an equilateral
triangle is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING/CAUTION
-- TO REDUCE THE RISK
OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR
MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
• Do not use the projector outside
and do not expose the product
to any humidity or water.
--Since the product is not
waterproof, this may result in
a fire or electric shock.
• Do not place the projector in
direct sunlight or near heat
sources such as radiators, fires,
stoves, etc.
--This may result in fire.
• Do not place flammable
materials such as aerosols near
the projector.
--This may result in fire.
• Do not allow children to cling to
or climb up to the projector.
-- This may cause the projector
to fall, causing injury or death.
SAFETY PRECAUTIONS
• Do not install the product in a
place with no ventilation (e.g.,
on a bookshelf or in a closet) or
on a carpet or cushion.
--This may result in fire due
to the increase in internal
temperature.
• Do not place the product close
to sources of steam, oil or oil
mist, such as humidifiers and
kitchen counters.
--Failure to do so may result
in fire, electric shock, or
corrosion.
• Do not install the product onto
a wall or ceiling that is close to
sources of oil or oil mist.
--The product may be
damaged and fall, resulting in
serious injury.
• Do not place the projector where
it might be exposed to dust.
--This may result in fire.
• Do not use the projector in a
damp place such as a bathroom
where it is likely to get wet.
--This may result in fire or
electric shock.
• Do not allow a tablecloth or
curtain to block the air vent.
--This may result in fire due to
the increase in the internal
temperature.
• Ensure good ventilation around
the projector. The distance
between the projector and the
wall should be at least 30 cm.
--This will prevent fire due to
the increase in the internal
temperature.
5
CAUTION
• When placing the projector on a
table or shelf, be careful not to
put it near the edge.
--The projector could fall due
to balance problems, which
may cause personal injury or
damage to the product. Make
sure to use the projector
cabinet or stand that fits the
projector.
• When moving the projector,
make sure to switch it off and
remove the power plug and
cords.
--The power cord may be
damaged, resulting in fire or
electric shock.
• Do not place the projector on
an unstable or vibrating surface
such as a wobbly shelf or a
slope.
--It may fall and cause injury.
• Be careful not to tip the projector
over when connecting external
devices to the projector.
--This may cause personal
injury or damage to the
projector.
Power
WARNING
• The appliance coupler is used
as the disconnect device.
--Please make sure the device
is installed near the wall
outlet to which it is connected
and that the outlet is easily
accessible.
6
SAFETY PRECAUTIONS
• The grounding wire should be
connected.
--Ensure that you connect the
grounding cable to avoid
electric shock. If it is not
possible to ground the unit,
have a qualified electrician
install a separate circuit
breaker.
Do not try to ground the
projector by connecting it to
telephone wires, lightning
rods or gas pipes.
• The power plug should be
inserted fully into the power
outlet.
--An unstable connection may
cause a fire.
• Do not place heavy objects on
the power cord.
--This may result in fire or
electric shock.
• Never touch the power plug with
wet hands.
--This may result in electric
shock.
• Do not plug too many devices
into one multi-power outlet.
--This may result in fire due to
the power outlet overheating.
• Prevent dust from collecting on
the power plug pins or outlet.
--This may result in fire.
• To turn off the main power,
remove the power plug, which
should be positioned so it is
easy to access for operation.
CAUTION
• Hold the plug firmly when
unplugging.
--A damaged wire may create
a fire hazard.
• Ensure the power cord and plug
are not damaged, modified,
severely bent, twisted, pulled,
sandwiched or hot. Do not use
the product if the power outlet
is loose.
--This may result in fire or
electric shock.
• Keep the power cord away from
heating devices.
--The wire's sheath may melt,
which may result in fire or
electric shock.
• Place the projector where
people will not trip over or step
on the power cord to protect the
power cord and plug from any
damage.
--This may result in fire or
electric shock.
• Do not turn the projector on or
off by plugging in the power plug
or unplugging it from the power
outlet. (Do not use the power
plug as a switch.)
--This may result in electric
shock or damage to the
product.
SAFETY PRECAUTIONS
• Do not insert a conductor
into the other side of the wall
outlet while the power plug is
inserted into the wall outlet.
In addition, do not touch the
power plug immediately after it
is disconnected from the wall
outlet.
--This may result in electric
shock.
• Only use the official power cord
provided by LG Electronics. Do
not use other power cords.
--This may result in fire or
electric shock.
When in Use
WARNING
• Do not place anything containing
liquid on top of the projector
such as a vase, flower pot,
cup, cosmetics, or medicine; or
ornaments, candles, etc.
--This may result in fire or
electric shock, or cause injury
due to falling.
• In the event that there is a
heavy impact or the cabinet is
damaged, switch it off, unplug
it from the power outlet and
contact an authorized service
center.
--This may result in electric
shock.
7
• Do not insert pieces of metal
such as coins, hairpins or metal
debris, nor flammable materials
such as paper or matches into
the projector.
--This is to prevent electric
shock or fire.
• In the event that liquid or a
foreign object falls into the
projector, switch it off and
unplug it from the power outlet
and contact our service center.
--This may result in fire or
electric shock.
• Make sure that a child does
not swallow the batteries when
you replace the old remote
control batteries with new ones.
Keep batteries out of reach of
children.
--If a child swallows a battery,
consult a doctor immediately.
• Never open any cover on the
projector.
--There is a high risk of electric
shock.
• Do not look directly into the lens
when the projector is in use.
--The bright light may damage
your eyes.
• When the lamp is on or has just
been turned off, avoid touching
the air vent or lamp, because
these will be very hot.
• If there is a gas leak in the
room with the projector, do not
touch the projector or power
outlet. Open the windows for
ventilation.
--Sparks may cause fire or
burns.
8
SAFETY PRECAUTIONS
• Unplug the power cord from the
outlet during a lightning storm.
--This will prevent shock or
damage to the projector.
• Do not use the projector near
electronic devices that generate
a strong magnetic field.
• Do not put the plastic package
used to pack the projector
around your head.
--This may cause suffocation.
• Do not keep your hand on the
projector for a long time when it
is running.
• When you play a game by
connecting a game console to
a projector, it is recommended
that you maintain a distance
of more than four times the
diagonal length of the screen.
--Make sure that the
connecting cable is long
enough. Otherwise, the
product may fall causing
personal injury or damage to
the product.
• Do not place the projector or its
remote control with battery in
an extremely high temperature
environment.
--This may result in fire.
CAUTION
• Do not place heavy objects on
the projector.
--It may fall down and cause
personal injury.
• Be careful not to allow any
impact to the lens during
transport.
• Do not touch the lens of the
projector.
--The lens may be damaged.
• Do not use any sharp tools on
the projector such as a knife
or hammer, because this may
damage the casing.
• In the event that no image
appears on the screen or no
sound is heard, stop using
the projector. Switch off the
projector, unplug it from the
power outlet and contact our
service center.
--This may result in fire or
electric shock.
• Do not drop anything onto the
projector or allow anything to
bang into the projector.
--This may cause damage
to the projector or personal
injury.
• It is recommended that you
maintain a distance of at least
5-7 times the diagonal length of
the screen.
--If you watch the screen at
a close distance for a long
time, your eye sight may
become worse.
SAFETY PRECAUTIONS
• Do not block the light beam
emitted from the projector using
a book or other object.
--Lengthy exposure to the
projector beam may result in
fire. In addition, the lens may
be overheated and damaged
by the reflected heat. Disable
the AV function to stop
projection temporarily or turn
off the power.
• Do not start the projector with
the volume turned up high.
--High volume may damage
hearing.
• Do not use high voltage
electrical equipment near the
projector, (e.g., a bug zapper.).
This may result in product
malfunction.
Cleaning
WARNING
• Do not spray the projector with
water when cleaning. Make sure
water does not flow into the
projector.
--This may result in fire or
electric shock.
• When there is smoke or a
strange smell coming out from
the projector or a foreign object
falls into the projector, please
switch it off and unplug it from
the power outlet and contact our
service center.
--Otherwise, this may result in
fire or electric shock.
9
• Use air spray, a soft cloth or
a cotton swab moistened with
a lens cleaning chemical or
alcohol to remove dust or stains
on the front projection lens.
CAUTION
• Contact your seller or our
service center once a year to
clean the internal parts of the
projector.
-- If you do not clean the
projector for a long period of
time, dust will accumulate,
which may result in fire or
damage to the projector.
• When cleaning plastic parts
such as the projector case,
unplug the power first and wipe
with a soft cloth. Do not spray
with water or wipe with a wet
cloth. Never use glass cleaner,
automobile or industrial shiner,
abrasives, wax, benzene, or
alcohol as these can damage the
projector.
-- This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
• Remove the plug from the outlet
before cleaning the product.
-- Otherwise, this may result in
electric shock.
10
SAFETY PRECAUTIONS
Others
WARNING
• When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
--Using a damaged power cord
may result in short circuit
or fire.
• Do not use the projector near
highprecision electronic devices
or those that transmit weak
radio signals.
--This may affect the operation
of the product, causing an
accident.
• Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service center.
--This may result in fire or
electric shock.
• Do not stare directly into lens
when in operation, eye damage
can occur.
• No user serviceable parts
inside unit. High voltage parts
can cause shock and even
electrocution.
• Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.
• To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after
power down to allow for proper
cool down (not applicable on
LED models).
• Do not touch the lens; doing so
can result in burns or damage
to lens. Lens and unit may be
HOT during and immediately
after use. Use caution when
handling unit, allowing for proper
cool down.
• Only use a grounded electrical
outlet.
• Do not insert anything into or
cover up the exhaust vents.
--This may result in fire or
electric shock.
• Follow all maintenance
guidelines for optimal use;
service only at an authorized
service center.
• Lamp contains mercury and
as such must be disposed of
according to local, state and
federal laws (not applicable on
LED models).
SAFETY PRECAUTIONS
CAUTION
• Do not mix new batteries with
old ones.
-- Burst or leaking batteries may
result in damage or injury.
• Be sure to unplug if the projector
is not to be used for a long
period.
-- Accumulated dust may result
in fire or electric shock due to
overheating, ignition, or poor
insulation.
• Only use the specified type of
battery.
-- Burst or leaking batteries may
result in damage or injury.
• Dispose of used batteries
properly.
-- This may result in explosion
or fire. The correct method of
disposal may vary depending
on your country or region.
Dispose of the battery pack
as instructed.
• Do not throw or disassemble the
battery.
-- This may result in fire or
explosion due to damage to
the battery.
11
• Store batteries away from
metallic objects, such as keys
and paper clips.
-- Excess current may cause a
rapid increase in temperature,
resulting in fire or burns.
• Do not store the batteries near
any heat source, such as a
heater.
-- This may result in fire or
damage to the product.
• Do not store batteries at
temperatures higher than 60 °C
or in high humidity.
-- This may result in explosion
or fire.
• Keep the batteries and remote
out of reach of children.
-- This will prevent personal
injury or damage to the
product.
• Make sure that the battery is
installed correctly.
-- This prevent explosion or fire.
• Make sure you use the same
type of batteries for replacement.
• Incorrect battery replacement
may cause fire.
12
SAFETY PRECAUTIONS
Antenna
WARNING
• If you are using an outdoor
antenna, please install it away
from electrical wires to make
sure it does not touch any
nearby wires even when it falls
down due to heavy wind.
• Failure to do so may cause
electric shock or physical injury.
CAUTION
• To prevent any water flowing
into the product, install a drip
loop in the outdoor antenna wire
where it comes indoors.
• Raindrops flowing into the
product may cause fire or
electric shock.
Antenna grounding according
to the National Electrical Code,
ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service
GroundingElectrode
System (NEC Art
250, Part H)
For USA
NOTE TO CABLE/TV INSTALLER
This reminder is provided to
call the CATV system installer’s
attention to Article 820 - 40 of the
National Electric Code (USA).
The code provides guidelines
for proper grounding and, in
particular, specifies that the cable
ground shall be connected to the
grounding system of the building,
as close to the point of the cable
entry as practical.
Risk Group 2
CAUTION Possibly hazardous
optical radiation emitted from this
product. Do not stare at operating
lamp. May be harmful to the eye.

CONTENTS
13
CONTENTS
LICENSES
2
USING THE PROJECTOR 32
SAFETY PRECAUTIONS 4
Connecting the Antenna or
Cable
32
PREPARATION
16
Accessories
16
Optional Extras
17
Parts and Components
18
--Main Unit
18
--Side19
--Back20
Using the Joystick Button
--Basic functions
--Adjusting the menu
21
21
22
Projector Status Indicators 22
Installation
23
--Installation Precautions 23
--Projection Distance per
Screen Size
24
--How to Install the Projector
On a Tripod
26
-- Kensington Security System 27
MAGIC REMOTE CONTROL 28
--To Register the Magic
Remote Control
30
--To Re-register the Magic
Remote Control
30
--Using the Magic Remote
Control31
Watching Projector
33
--Initial Setup
33
--Focus and Position of the
Screen Image
36
-- Watching With the Projector 37
To Set Channel
38
--To View Program Information
38
--To Set Favorite Channels 38
--To Use Favorite
39
--To Set Auto Tuning
39
-- To Set Channels Manually 39
--To Edit Channels 39
Additional Options
40
--To adjust Aspect Ratio 40
--Using the Edge Adj (4 Corner
Keystone) Function
41
--Changing Input Device 42
--To Use SIMPLINK
44
Using the Quick Menu
46
To Set Sound
--To Set Sound Output
--Using the Multi Audio
47
47
48
ENTERTAINMENT
50
To use Smart Features
--To use Home Screen
--To use MY APPS
--To edit items in MY APPS 50
50
51
51
14
CONTENTS
To Connect Network
52
--One-click Network
Connection52
--To Connect to a Network
Through Set Expert
52
--To Use the Wi-Fi Direct
Function53
--Tips for Network Settings 54
SMARTSHARE
55
Before Using
55
-- Connecting a USB Device 55
--Removing a USB Device 55
To use SmartShare™
--Watching the Videos
--Viewing the Photos
--Listening to Music
--Viewing Files
--To Set SmartShare™
Related Functions
To use SCREEN SHARE
(Miracast™ / Intel’s WiDi
Function)
--To Use the Miracast™ /
Intel’s WiDi Function
57
58
60
61
62
63
To Use a Premium Service 70
--To Use Paid Content 71
--To Reset Premium
72
To Use LG Smart World
73
--To Sign Up With LG Smart
World 74
--To Install An App On Your
Projector 74
-- To Manage My Information 75
To Use Search Function
76
To Use the Voice Recognition
Function
77
--Using this Function Through
Search77
--Using this Function on the
Internet77
To Use Voice Mate Function 79
--What Is Voice Mate?
79
--How to Use Voice Mate? 80
--What Are Other Functions of
Voice Mate?
80
65
See Avatar
--Using the Avatar 81
81
65
What Is On Now?
--To Use On Now
82
82
To Use Internet
85
To connect DLNA
66
-- To connect a DLNAauthenticated Smartphone 66
--To connect DLNA DMR
(Digital Media Renderer) 67
--To connect a DLNA DMP
(Digital Media Player)
67
--SmartShare™ PC SW
Installing and Setting
68
--In Case of a DLNA
Malfunction69
Frequently Asked Questions
for Projector
86
USING ADVANCED
FUNCTIONS
91
To Use Screen Remote
91
--To Use Screen Remote 91
-- To Control a Device
Connected to the Projector
Using the Screen Remote 91
CONTENTS
To Use the Universal Control
function
92
To Control a Projector Using a
Smartphone
93
To Use a USB Input Device On
a Projector
94
--To Use a USB Wired/wireless
Mouse94
--To Use a USB Wired/wireless
Keyboard94
15
Connecting a PC
121
--HDMI Connection
121
-- HDMI to DVI Connection 122
Connecting a Laptop
--HDMI Connection
123
123
Connecting Headphones
124
Connecting a Digital Amp 124
Using the Mirroring Function
of a Mobile Phone
126
--MHL Connection
126
CUSTOMIZING SETTINGS 95
MAINTENANCE
SETTINGS
95
PICTURE Settings
96
Cleaning
127
--Cleaning the Lens
127
--Cleaning the Projector Case
127
SOUND Settings
102
CHANNEL Settings
105
TIME Settings
106
LOCK Settings
107
OPTION Settings
110
NETWORK Settings
115
SUPPORT
117
CONNECTING DEVICES118
Connecting to HD Receiver,
DVD, or VCR Player, External
Devices
119
--HDMI Connection
119
-- HDMI to DVI Connection 120
--AV Connection
120
-- Component Connection 121
INFORMATION
127
128
To Update Projector Software 128
Before Reporting a Problem,
Check the Following:
129
--General129
--Picture129
--Sound130
--PC Connection Problem 132
--Problems Replaying Movies
in My Media
133
SPECIFICATIONS
134
16
PREPARATION
PREPARATION
The pictures may differ slightly from the actual product.
Accessories
Accessories included with the projector are show below.
Accessories are subject to change without prior notice.
New accessories may be added or old ones removed.
Magic Remote Control
Two AA Batteries
Owner's Manual CD
Owner's Manual
Composite Gender
Component Gender
Power cord
AC-DC Adaptor
• When connecting an HDMI or USB
cable, or connecting a USB flash drive
to the HDMI or USB port, use a product
that has a width of 18 mm or less and
a height of 10 mm or less. If the USB
cable or USB flash drive does not fit
the USB ports of the projector, use an
extension cable that supports USB 2.0.
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display or a
connection error may occur. (Recommended HDMI cable types)
--High-Speed HDMI®/™ Cable
--High-Speed HDMI®/™ Cable with Ethernet
PREPARATION
17
Optional Extras
To purchase optional accessories, visit an electronics store or online
shopping site or contact the retail store where you purchased the product.
Optional accessories are subject to change without prior notice.
Projection Screen
Tripod
HDMI Cable
Video Cable
Audio Cable
RF Cable
Optical Cable
LG Audio Device
MHL Cable
18
PREPARATION
Parts and Components
This projector is manufactured using high-precision technology. You may,
however, see tiny black dots and/or bright colored dots (red, blue, or
green) that continuously appear on the projector screen. This is a normal
result of the manufacturing process and does not indicate a malfunction.
Main Unit
Joystick Button
Speaker
Vent1)
Vent1)
Zoom ring
Lens2)
Vent1)
Speaker
Focus Ring
Vent1)
1)Due to the high temperature of vent area, do not get close to the vent area.
2)Do not touch the lens when using the projector. The lens may be damaged.
PREPARATION
Side
2 3 4
1
5
6
Description
1
2
PUSH button
(Headphone Port)
3
COMPONENT IN Port
4
AV IN Port
5
OPTICAL DIGITAL AUDIO OUT Port
6
7
8
(USB port)
LAN Port
Port
7
8
19
20
PREPARATION
Back
1
2
No.
1
4
4
Description
IR Reciver
Port
2
3
3
DC IN Port
Port
PREPARATION
21
Using the Joystick Button
You can operate the projector by pressing the button or moving the joystick
left, right, up, or down.
Basic functions
Power On
When the projector is turned off, place
your finger on the joystick button,
press it once, and release it.
Power Off
When the projector is turned on, place
your finger on the joystick button,
press it once for a few seconds, and
release it. (However, if the Menu
button is on the screen, pressing and
holding the joystick button will let you
exit the Menu.)
Volume
Control
Place your finger over the joystick
button and move it left or right, you
can adjust the volume level.
Channels
Control
Place your finger over the joystick
button and move it up or down, you
can scroll through the saved channels.
NOTE
• Place your finger over the joystick button and move it up, down, left,
or right. Be careful not to press the joystick button. If you press the
joystick button first, you may not be able to adjust the volume level
and/or scroll through saved channels.
22
PREPARATION
Adjusting the menu
When the projector is turned on, press the joystick button one time.
You can adjust the menu items ( ,
, , ) moving the joystick
button left, right, up, or down. Move to the desired menu item, and then
press the joystick button once to select it.
Close
Projector off
Turns the power off.
Input List
Changes the input source.
Close
Clears on-screen displays and
returns to projector viewing.
Settings
Displays the Settings menu.
Projector Status Indicators
LED Power
Indicator
LED Power Indicator
Red
Power standby state
Off
The projector is operating with the power on.
PREPARATION
Installation
Installation Precautions
• Place the projector in a wellventilated environment.
--To prevent internal
overheating, install the
projector in a well-ventilated
place. Do not place anything
near the projector. That may
block its air vents. If the
air vents are blocked, the
internal temperature of the
projector will increase.
--Do not place the projector
on a carpet or rug. If the
projector's inlet vent is on
the bottom, be careful not to
block the vent and always
use the projector on a solid,
level surface.
--Be sure to prevent foreign
objects such as paper debris
from entering the projector.
23
--Leave an adequate open
area (30 cm or more) around
the projector.
• Do not place the projector in a
hot, cool, or humid environment.
• Do not place the projector in a
place where it will easily attract
dust.
--This may result in fire.
• Never open any cover on the
projector. There is a high risk of
electric shock.
• The projector is manufactured
using high-precision technology.
You may, however, see
tiny black dots and/or bright
colored dots (red, blue or
green) that continuously
appear on the projector screen.
This is a normal result of the
manufacturing process and
does not indicate a malfunction.
• The remote control may not
work in an environment where
a lamp equipped with electronic
ballasts or a three-wavelength
fluorescent lamp is installed.
Replace the lamp with an
international standard lamp
for the remote control to work
normally.
24
PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or
audio/video source.
2 Place the projector an appropriate distance away from the screen. The
distance between the projector and the screen determines the actual
size of the image.
3 Position the projector so that the lens is at a right angle to the screen.
If the projector is not at a right angle, the projected image will look
distorted. To correct the distortion, use the Edge Adj function.
(See page 41.)
4 Connect the power cord of the projector and the connected device to
the wall outlet.
Ratio of upward projection: 100 %
Y/2
Y/2
X/2
Projection Distance (D)
Screen Width (Y)
X/2
Screen Height (X)
Screen
Screen
66.0 mm
Projection Distance (D)
PREPARATION
16:9 Aspect Ratio (Wide)
Screen Size (mm)
Screen Width (Y) (mm)
Screen Height
(X) (mm)
762
889
1016
1143
1270
1397
1524
1651
1778
1905
2032
2159
2286
2413
2540
2667
2794
2921
3048
664
775
886
996
1107
1218
1328
1439
1550
1660
1771
1882
1992
2103
2214
2324
2435
2546
2657
374
436
498
560
623
685
747
809
872
934
996
1058
1121
1183
1245
1308
1370
1432
1494
16:9 Aspect Ratio (Tele)
Screen Size (mm)
Screen Width (Y) (mm)
Screen Height
(X) (mm)
693
808
924
1039
1155
1270
1385
1501
1616
1732
1847
1963
2078
2194
2309
2425
2540
2655
2771
604
704
805
906
1006
1107
1208
1308
1409
1509
1610
1711
1811
1912
2013
2113
2214
2314
2415
340
396
453
509
566
623
679
736
792
849
906
962
1019
1075
1132
1189
1245
1302
1358
Projection
Distance (D) (mm)
905
1061
1230
1371
1526
1682
1837
1992
2147
2302
2458
2613
2768
2923
3078
3234
3388
3544
3698
Projection
Distance (D) (mm)
905
1061
1230
1371
1526
1682
1837
1992
2147
2302
2458
2613
2768
2923
3078
3234
3388
3544
3698
25
26
PREPARATION
How to Install the Projector On a Tripod
• You can install the projector using a camera tripod.
• As shown below, you can mount the projector instead of a camera on
the tripod.
• When stabilizing the tripod, we recommend using a locking bolt of
standard size 4.5 mm or less. The maximum size allowed for the locking
bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may
damage the projector.)
Bottom of the
Projector
Bolt used to
attach the
projector to
the tripod
The projector
is connected to
this part.
Tripod

CAUTION
• If you are using a tripod, be careful not to apply external force to the
tripod. Doing so may damage the projector.
• Do not place the tripod on an unstable surface.
• Be sure to use a tripod with a maximum load capacity of 3 kg or
more.
• To use the projector safely, position the tripod legs so that they are
as wide and stable as possible and be sure to securely attach the
projector to the tripod.
PREPARATION
27
Kensington Security System
• This projector has a Kensington Security Standard connector as an
anti-theft mechanism. Connect a Kensington Security System cable as
shown below.
• For more information on installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington Security
System.
• The Kensington Security System is an optional accessory.
• What is Kensington?
Kensington is a company that provides safety systems for laptops and
other electronic devices. Website: http://www.kensington.com
28
MAGIC REMOTE CONTROL
MAGIC REMOTE CONTROL
If the battery low message appears while using the
Projector, replace the batteries.
As shown in the figure, press the top of the battery
cover and slide it down the cover. Insert two new and
identical batteries (1.5 V, AA type) with + and - poles
pointing in the correct direction in the remote control.
2
1
NOTE
•Do not mix new batteries with old ones.
(POWER)
Turns the Projector on or off.
(Up/Down/Left/Right)
Press the up, down, left or right button to scroll
the menu.
buttons while the
If you press
pointer is in use, the pointer will disappear from
the screen and Magic Remote will operate like
a general remote control. To display the pointer
on the screen again, shake Magic Remote to the
left and right.
(BACK)
Returns to the previous screen.
(Home)
Accesses the Home menu.
Wheel (OK)
Press the center of the Wheel button to select a
menu. You can change channels by using the
Wheel button.
MAGIC REMOTE CONTROL
29
(EXIT to LIVE)
Switches among broadcast (antenna) and
various inputs.
(Voice recognition)
Network connection is required to use the voice
recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window
appears on the left of the Projector screen.
* Use the Magic Remote no further than
10 cm from your face.
* The voice recognition may fail when you
speak too fast or too slowly.
* The recognition rate may vary depending
on the user’s characteristics (voice,
pronunciation, intonation, and speed)
and the environment (noise and Projector
volume).
Colored buttons
These access special functions in some menus.
VOL
Adjusts the volume level.
/INPUT
Displays the Screen Remote.
* Pressing and holding the
button will
/INPUT
display a menu to select an external device that
is connected to the Projector.
FLASHBK
Displays the channel you were watching
previously.
(MUTE)
Mutes all sounds.
* By pressing and holding the
button, video
descriptions function will be enabled.
* SAP(Secondary Audio Program) Feature can
also be enabled by pressing the
button.
CH
Scrolls through the saved channels.
30
MAGIC REMOTE CONTROL
1
2
1
Displayed when you press
the
Wheel (OK) button
on the magic remote control.
Check program information.
2
If you point and hold the
pointer at the bottom left of
the screen while watching
projector, the MY APPS
icon is displayed. Clicking
the icon displays the MY
APPS menu.
To Register the Magic Remote Control
To use the Magic Remote control, register it with your projector first.
1 Put batteries into the Magic Remote and turn the Projector on.
2 Point the Magic Remote at your projector and press the Wheel
(OK) on the remote control.
• If the projector fails to register the Magic Remote, try again after turning
the projector off and back on.
To Re-register the Magic Remote Control
1 Press the
(Home) and
(BACK) buttons at the same time, for
five seconds, to unpair the Magic Remote with your projector.
2 Press the
Wheel (OK) button towards the projector to re-register
the magic remote control.
• Pressing and holding the
(EXIT to LIVE) button will let you cancel
and re-register Magic Remote at once.
MAGIC REMOTE CONTROL
31
Using the Magic Remote Control
• Shake the magic remote control lightly when
there is no pointer displayed on the screen. A
pointer will be displayed on the screen.
--The pointer disappears if the remote control
is not used for a certain period of time.
• When you move the pointer signal transmitter
up/down/left/right while pointing it toward the
projector, the pointer moves.
--If the pointer is not working properly, do not
move the magic remote control for about
10 seconds, and then try again.
• If you press the navigation button while moving the pointer on the
screen, the pointer disappears, and the magic remote control works as a
common remote control.
• Use within an effective distance of 10 meters. Using the remote control
from greater distances or when obstructions block the sight line may
cause malfunctions.
• Electronic devices nearby may cause communication interference.
Devices such as microwave ovens and wireless LANs use the same
frequency range (2.4 GHz) as the Magic Remote Control and may cause
interference.
• Take care not to bang it against other hard objects such as furniture or
the floor.
32
USING THE PROJECTOR
USING THE PROJECTOR
Connecting the Antenna or Cable
To watch TV using an indoor/outdoor antenna, connect a wall terminal and
the antenna port of the Projector using an RF cable (75 Ω).
You can watch terrestrial or cable (analog, digital) TV. (The RF cable is
sold separately.)

NOTE
• Make sure not to bend the copper wire of
the RF cable (75 Ω). Turn the input jack to
the right to fasten it.
• Ensure you use a standard coaxial cable
(75 Ω, sold separately) when connecting to
the projector input.
Copper wire
• For better image quality in locations where
signal strength is low, purchase and install a
signal amplifier (booster).
• A signal splitter is required if you want to use two or more
projectors through one antenna.
• If you have any problems when installing the antenna, please
consult a suitable retailer or the store where you purchased the
antenna.
USING THE PROJECTOR
33
Watching Projector
Initial Setup
The menu screen display in this owner's manual is an example to help
users understand how to operate the product and may look different from
the actual screen.
1 Connect the power cord correctly.
2 After waiting for a moment, press the POWER button on the remote
control or the joystick button.
3 When you turn on the projector for the first time, a setting screen
appears as shown below. Here, you can specify the items required for
watching the projector more easily.
--Store mode is used when displaying the product in-store. The
picture mode is automatically reset after a certain period of time. You
can select Home to use the product at home.
34
USING THE PROJECTOR
USING THE PROJECTOR
--The initial settings are completed when you select the settings
above.
NOTE
• For Auto Tuning while using the projector, go to
(Home) →
SETTINGS → CHANNEL and select Auto Tuning.
• To change the mode while using the projector, go to
(Home) →
SETTINGS → OPTION and select Mode Setting.
35
36
USING THE PROJECTOR
Focus and Position of the Screen Image
When an image appears on the screen, check if it is in focus and fits the
screen properly.
Zoom Ring
Focus Ring
• To adjust the focus of the image, rotate the focus ring.
• To adjust the size of the image, rotate the zoom ring. To move the
screen image upward/downward, adjust the height of the foot at the
bottom of the projector.
PUSH: Front foot
adjustment button
• While pressing the PUSH button, adjust the projector upward/downward
until the screen image is in the desired position.
• When you release the PUSH button, the front foot becomes fixed at the
current position.
USING THE PROJECTOR
37
Watching With the Projector
1 When in standby mode, press the POWER button to turn the projector
on.
2 Select the
want.
(Home) → INPUT LIST and select the input signal you
3 Control the projector using the following buttons while watching
projector.
Button
CH
VOL
(MUTE)
Description
Changes the TV channel.
Adjusts the volume level.
Mutes the sound from the projector.
4 To turn the projector off, press the POWER button.
38
USING THE PROJECTOR
To Set Channel
Image shown may differ from your projector.
To View Program Information
Displays information on current program and / or current time, etc.
1 Move the pointer of the Magic Remote control to the top of the
projector screen.
2 Click the activated channel banner area.
3 The program details will be displayed at the bottom of the projector
screen.
1
3
2
Description
1
Program name
2
Current time
3
Detail information on program (for digital broadcast)
To Set Favorite Channels
(Home) → SETTINGS → CHANNEL → Channel Edit
1 Move to the desired channel on
selected.
Wheel (OK) button. Channel is
2 Press Set as Favorite.
3 Select the desired Favorite channel group.
4 Select OK. Favorite is set.
USING THE PROJECTOR
To Use Favorite
(Home) → MY APPS → Ch. List
Channel list will appear. Select the desired preset favorite channel from
Favorite List A to D.
To Set Auto Tuning
(Home) → SETTINGS → CHANNEL → Auto Tuning
Automatically tunes the channels.
• Channels are not registered properly unless the antenna / cable is
connected correctly.
• Auto Tuning only sets channels that are currently broadcasting.
• If Lock System is turned on, a pop-up window will appear asking for
password.
To Set Channels Manually
(Home) → SETTINGS → CHANNEL → Manual Tuning
Adjusts channels manually and saves the results.
For digital broadcasting, signal strength, etc. can be checked.
To Edit Channels
(Home) → SETTINGS → CHANNEL → Channel Edit
Edits the saved channels
Set your selected channel as favorite, block / unblock, and Add / Delete.
39
40
USING THE PROJECTOR
Additional Options
To adjust Aspect Ratio
Select
(Home) → SETTINGS → PICTURE → Aspect Ratio
Selects the screen aspect ratio.
Menu
Description
16:9
Resizes images to fit the screen width.
Just Scan
Displays video images in the original size without
removing parts of the edge of the image.
• In DTV / HDMI / Component (over 720p) mode, Just
Scan is available.
Set By
Program
Depending on the input signal, screen aspect ratio
changes to 4:3 or 16:9.
4:3
Resizes images to the previous standard 4:3.
Zoom
Resizes the image to fit the screen width. The top and
bottom parts of the image may be cut off.
Cinema
Zoom 1
Formats an image to the cinema scope ratio (2.35:1) and
zooms in on the ratio.
NOTE
•While viewing an external device, these cases may result in image
burn :
--a video with stationary caption (such as network name)
--4:3 aspect ratio mode for an extended period.
Take caution when using these functions.
•Available picture size may differ depending on the input signal.
•The screen aspect ratios on HDMI-PC input are available in 4:3 and
16:9 only.
USING THE PROJECTOR
41
Using the Edge Adj (4 Corner Keystone) Function
Edge Adj (4 Corner Keystone) adjusts the horizontal and vertical sides of
the projected image if the projector is at an angle and not perpendicular to
the screen. This feature ensures the shape of the projected image is not
distorted.
Use this feature only when the projector cannot be set up at the optimal
angle. Edge Adj may result in a loss of image quality.
1 Go to (Home) → SETTINGS → OPTION → Edge Adj.
2 The value range of Edge Adj is as follows.
--Top Left (H: 0 to 100, V: 0 to 100)
--Top Right (H: -100 to 0, V: 0 to 100)
--Bottom Left (H: 0 to 100, V: -100 to 0)
--Bottom Right (H: -100 to 0, V:-100 to 0)
3 Press the
Wheel (OK) button.
NOTE
•When using Auto Keystone, the current value set for Edge Adj is
changed to the value that has been set with Auto Keystone.
42
USING THE PROJECTOR
Changing Input Device
To select an external input
Selects external input.
• Select
(Home) → INPUT LIST or press the INPUT button on the
remote control to display the input selection screen.
--Connected inputs are displayed first. However, AV is always
activated.
• Select an input signal using the remote control's INPUT button to
connect the projector to the desired input. You can use the or
button to switch among all the input modes.
1
2
3
4
5
Description
1
Selects speaker.
2
Selects input.
3
Edits the name of external device connected to external
terminal.
4
Sets SIMPLINK.
5
Sets Universal Remote Control.
USING THE PROJECTOR
Selecting an Input Label
Displays which devices are connected to which input ports.
1 Select
(Home) → INPUT LIST or press the INPUT button on the
remote control to display the input selection screen.
2 Press the red button.
3 Press the or button to go to the desired input and press the
Wheel (OK) button.
4 Press the
,
,
, or
button to select a device name.
43
44
USING THE PROJECTOR
To Use SIMPLINK
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently using the projector remote control only via
the SIMPLINK menu.
1 Connect the projector's HDMI terminal with the SIMPLINK device's
HDMI output terminal using an HDMI cable. For home theater units
with a SIMPLINK function, connect HDMI terminals as above, and
use an optical cable to connect Optical Digital Audio Out from the
projector to Optical Digital Audio In of the SIMPLINK device
2 Select
(Home) → MY APPS → SIMPLINK. SIMPLINK menu
window appears.
3 Select SIMPLINK Setting on SIMPLINK menu window. SIMPLINK
setup window appears.
4 SIMPLINK to On in SIMPLINK setup window.
5 Close SIMPLINK setup window.
6 Select the device to control from (Home) → MY APPS →
SIMPLINK.
NOTE
• This function only works on devices with the SIMPLINK logo
(
). Verify that the external device has a SIMPLINK logo.
• To use the SIMPLINK function, you need to use a high-speed HDMI®
cable (with CEC, or Consumer Electronics Control, feature added).
High-speed HDMI® cables have pin 13 connected for information
exchange between devices.
• Turn on or select the media of a device with home theater features to
see the speaker switch to External Speaker.
• To use the Listen via External Speaker function, connect an optical
cable (Purchase separately) or HDMI-ARC-enabled device via the
HDMI-ARC port.
• Switching to external input causes devices operating with SIMPLINK
to stop.
• Use of a third-party device with HDMI-CEC features may cause
malfunctions.
• Connect with an Optical cable (sold separately) to use External
Speaker.
USING THE PROJECTOR
45
Explanation of SIMPLINK Features
Menu
Description
Direct Play
Plays the multimedia device on the projector
instantly.
Select
multimedia
device
Selects the desired device via the SIMPLINK menu
to control it from the projector screen instantly.
Disc playback
Manages the multimedia device with the projector
remote control.
Power off all
devices
If the Auto Power function is set to On in the
SIMPLINK settings, turning the projector off will
turn the power off on all SIMPLINK-connected
devices.
Sync Power on
If the Auto Power function is set to On in the
SIMPLINK settings, turning on a SIMPLINK device
will turn the projector on.
Speaker
Selects speaker either on the home theater unit or
the projector.
46
USING THE PROJECTOR
Using the Quick Menu
You can customize frequently used menus.
1 Select
2 Press the
(Home) → MY APPS → Quick Menu.
button.
or
button to select a menu and press
Menu
Wheel (OK)
Description
Aspect Ratio
Resizes the picture.
Picture Mode
Changes the picture mode.
Sound Mode
Sets the sound mode.
Sleep Timer
Sets the projector to be turned off at the specified
time.
Caption
Sets whether to display captions.
Multi Audio
Sets MONO or STEREO, or a language for a
bilingual broadcast (digital signal).
SAP
Changes the MTS sound (analog signal).
Energy Saving
Reduces power consumption by adjusting peak
screen brightness.
Sets the genre.
Mode
AV Mode
Off
You can watch using the settings in the
video/audio menu.
Sport
Optimizes video/ audio settings for sports.
Cinema
Change to optimal video/ audio settings
for movies.
Game
Change to optimal video/audio settings
for games.
Del/Add
Can delete or add channels.
USB Device
Allows you to remove a connected USB device in a
safe manner.
3 Press the
menus.
,
,
, or
button to scroll through the following
USING THE PROJECTOR
To Set Sound
To Set Sound Output
To use projector’s speakers
Sound is output through the projector speaker.
•
(Home) → SETTINGS → SOUND → Sound Out → Projector
Speaker
To use External Speaker
Sound is output through the speaker connected to the optical or HDMI
(ARC) port.
SIMPLINK is supported.
•
(Home) → SETTINGS → SOUND → Sound Out → External
Speaker (Optical/HDMI ARC)
To use Digital Sound Out
Sets up Digital Sound Output.
•
(Home) → SETTINGS → SOUND → Sound Out → External
Speaker (Optical/HDMI ARC) → Digital Sound Out
Item
Auto
PCM
Sound Input
Digital Sound Output
MPEG
PCM
Dolby Digital
Dolby Digital
Dolby Digital Plus
Dolby Digital
HE-AAC
Dolby Digital
All
PCM
To connect and use an LG audio device
LG audio device allows you to enjoy rich powerful sound easily.
•
(Home) → SETTINGS → SOUND → Sound Out → LG Sound
Sync (Optical)
Connect an LG audio device with the
logo to the OPTICAL
DIGITAL AUDIO OUTPUT port.
47
48
USING THE PROJECTOR
To Connect and Use a Bluetooth device
Sound output is through the Bluetooth device.
•
(Home) → SETTINGS → SOUND → Sound Out → Bluetooth
• The devices that can be connected are:LG BTS1, LG HBS-700, LG
HBS-730, LG HBS-800 (Product availability may vary by country.)
• For wireless connection, if the device fails to connect. Check the device
power to connect and if the LG Audio device is in a proper operating
condition.
• If two or more devices are detected, the first detected device is
connected first. To view more detected devices to connect, press the
Show More button.
• Products from other manufacturers may not be compatible.
To Connect and Use a Headphone
Sound output is through the headphone.
•
(Home) → SETTINGS → SOUND → Sound Out → Headphone
• If you connect headphones while the projector is powered on, it
automatically detects the headphones and sounds through them.
Using the Multi Audio
Multi Audio means stereo and multiple language broadcast from the
channel provider.
•
(Home) → MY APPS → Quick Menu → Multi Audio
In the case of digital broadcast
Multiple languages can be selected depending on the multi-language
signals from the TV station.
• For default language, select at
(Home) → SETTINGS → OPTION
→ Language → Audio Language.
USING THE PROJECTOR
49
In the case of analog broadcast
Item
Description
Mono
Left and right speakers produce sound, and the
sound mode is mono.
Select this menu to listen in Mono mode regardless
of broadcast state. This can be set for a stereo
broadcast signal. Select Mono in poor reception
areas (e.g., areas with weak or erratic signals) or
when multi audio reception is not clear.
Stereo
The sound mode is in stereo when the sound comes
out of both left and right speakers.
Main language
/ Sub language
If the station broadcasts a multi-language signal,
different languages may be selected.
50
ENTERTAINMENT
ENTERTAINMENT
To use Smart Features
To use Home Screen
• Press the
(Home) button on the remote control.
With all projector features on one screen, everyone can access a wealth of
content and applications conveniently via the quick and easy-to-use menu,
arranged by themes such as Live TV, MY APPS, etc.
2
Movie
Weather
News
Sports
UCC
Picture
Map
Game
Music
SNS
1
3
Description
1
RECENT LIST
2
Sign in
3
MY APPS
ENTERTAINMENT
51
To use MY APPS
•
(Home) → MY APPS
• Select MY APPS at the lower right of the home screen.
• Check pre-installed apps and apps you have downloaded.
To edit items in MY APPS
• Select
(Home) → MY APPS →
(Edit).
• On the MY APPS page, select
(Edit) at the top of the screen to
move or delete apps. Please note that system apps can be moved, but
cannot be deleted.
• Changes orders / deletes items by dragging the app icons if your device
has a Magic Remote Control.
52
ENTERTAINMENT
To Connect Network
A wireless or wired network connection is required to use smart features.
When connected to the network, you can use premium content, LG Smart
World, DLNA and more.
One-click Network Connection
Connects easily to a wired/wireless network.
•
(Home) → SETTINGS → NETWORK → Network Connection to
connect to an available network automatically. Follow the prompts on the
projector.
To Connect to a Network Through Set Expert
For use in special circumstances such as in offices (in cases where a static
IP is used).
• Select
(Home) → SETTINGS → NETWORK → Network
Connection → Start Connection (→ Other Network List) → Manual
Setup.
1 Select a Network Connection, either Wired or Wireless.
2 When connecting via Wi-Fi, use the one of the following network
connection methods.
Item
Description
AP List
Connects to the network selected from the AP List.
Enter the SSID
Connects to the wireless AP typed in.
WPS-PBC
Connects easily when the button of a wireless AP
supporting PBC is pressed.
WPS-PIN
Connects easily when the PIN of the wireless AP
that you wish to connect to is entered in to the AP
website.
ENTERTAINMENT
53
To Use the Wi-Fi Direct Function
Wi-Fi Direct is a function that allows your projector to connect with a Wi-Fi
Direct device without Internet connection. With SmartShare™, you can
watch the files stored on a device connected via Wi-Fi Direct.
• Select
(Home) → SETTINGS → NETWORK → Wi-Fi Direct.
1 Set Wi-Fi Direct to On. (If you do not use it, please change it to Off.)
2 Enable the Wi-Fi Direct settings on the device to which you want to
connect.
3 A list of devices that can be connected to the projector is displayed.
4 Select a device to connect.
5 Select Yes when the connection request message appears.
6 If the device that you want to connect accepts the request, Wi-Fi
Direct is connected.
54
ENTERTAINMENT
Tips for Network Settings
• Use a standard LAN cable (Cat5 or higher with RJ45 connector,
10 Base-T or 100 Base TX LAN port).
• Resetting your modem can cause network connection problems. To
resolve the problem, turn the power off, disconnect and reconnect, and
then turn the power back on.
• LG Electronics is not responsible for any network connection problems
or any faults, malfunctions and errors caused by an network connection.
• A network connection may not work properly depending on the Internet
service provider.
• A DSL modem is required for a DSL service; a cable modem is required
for a cable service. Only a limited number of network connections
may be available, and projector network setting may not be available
depending on your contract with your Internet Service Provider (ISP.)
(If only one device is allowed per line and the PC is already connected,
other devices cannot be used.)
• Wireless networks can be subject to interference from other devices
operating at a frequency of 2.4 GHz (wireless phones, Bluetooth
devices, or microwave ovens). There may also be interference from
devices with a frequency of 5 GHz, same as other Wi-Fi devices.
• The surrounding wireless environment can cause the wireless network
service to run slowly.
• If you do not turn off the entire local home network, network traffic may
occur on some devices.
• For an AP connection, an access point device that supports wireless
connection is required and the wireless connection feature must
be enabled on the device. Contact your service provider regarding
availability of wireless connection on your access point.
• Check the SSID and security settings of the AP for AP connection. Refer
to the appropriate documentation for SSID and security settings of the
AP.
• Invalid settings on network devices (wired/wireless line sharer, hub)
can cause the projector to run slowly or not operate properly. Install
the devices correctly according to the appropriate manual and set the
network.
• Connection method may differ according to the AP manufacturer.
SMARTSHARE
55
SMARTSHARE
Smartshare is the name of contents sharing and usage function that
includes USB Connection, SCREEN SHARE (Miracast™, Intel’s WiDi),
DLNA and others.
Before Using
Connecting a USB Device
Connect a USB device (external
HDD, USB memory) to the USB port
of projector to enjoy the content files
stored in the USB device with your
projector. You cannot write or delete
data in the USB device. Connect a
USB flash drive as shown below.
USB flash
Drive

Removing a USB Device
1 Select
2 Use the
(Home) → MY APPS → Quick Menu.
or button to move to USB Device and press the
Wheel (OK) button.
3 Select a USB to remove. Wait for confirmation that the USB device has
stopped before removing the USB.

NOTE
• If detached early, an error may occur on the projector or the USB
storage device.
• Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
56
SMARTSHARE
Tips for using a USB device
• If the USB storage device has a built-in auto recognition program or uses
its own driver, it may not work.
• Some USB storage devices may not work or may work incorrectly.
• If you use a USB extension cable, the USB device may not be
recognized or may not work properly.
• Use only USB storage devices formatted with the Windows FAT32 or
NTFS file system.
• For external USB HDDs, it is recommended that you use devices with a
rated voltage of less than 5 V and a rated current of less than 500 mA.
• It is recommended to use a USB hub or hard disk drive with power
supplied. (If the power supplied is not enough, the USB storage device
may not be detected properly.)
• It is recommended that you use USB flash drives of 32 GB or less and
USB HDDs of 2 TB or less.
• If a USB HDD with power-saving function does not work properly, turn
the power off and on. For more information, refer to the user manual of
the USB HDD.
• Data in USB storage device can be damaged so be sure to back
up important files to other devices. Data maintenance is the user's
responsibility and the manufacturer is not responsible for data loss.
SMARTSHARE
57
To use SmartShare™
1 Press the (Home) button on the magic remote control.
2 Select SMARTSHARE™.
You can watch the photo, music, video, and document on the projector
by connecting a USB or home network (DLNA). The photo, music, video,
and document files of all devices connected to the projector are displayed.
(For the document files, only those in the devices connected via USB are
displayed.)
1
000
001
002
003
004
005
006
007
008
009
010
011
2
Description
1
Displays photo/music/video files on all devices connected to the
Projector.
2
Shows how to connect PC, smartphone/device, and USB.
58
SMARTSHARE
Watching the Videos
In the Videos, you can watch movies stored on the connected USB
device.
Controls playback and sets options while viewing videos.
Playing video - warning
• Some subtitles created by users may not work properly.
• The video and subtitle files should be placed in the same folder. For
subtitles to display correctly, the video and subtitle files must have the
same name.
• Subtitles on an NAS (Network Attached Storage) device may not be
supported depending on the manufacturer and model.
• We do not support any stream that contains GMC (Global Motion
Compensation) or Qpel (Quarterpel Motion Estimation).
• Only H.264 / AVC profile level 4.1 and lower is supported.
• The file size limit is dependent on the encoding environment.
• It works only the above version of Window Media Audio V2.
• It’s not supported AAC Main Profile.
• Video files created by some encoders may not be played back.
• Video files in formats other than the ones specified here may not be
played back.
• Playback of video files stored on the USB device that do not support
High Speed may not work properly.
• The projector supports DTS audio codec when the USB / HDMI video
file playback.
SMARTSHARE
To control video playback
You can control playback using the following buttons.
Shows the current playing position.
Use the or button to move forward or backward.
Item
Description
Resumes normal playback.
Pauses the video player.
Displays in slow motion.
Whenever this button is pressed, the playback speed is
increased or decreased by one unit.
Plays the previous/next file.
Option
Sets the option.
59
60
SMARTSHARE
Viewing the Photos
You can view photos stored on a connected device.
To control photo view
You can control playback using the following buttons.
Item
,
Description
Selects the previous or next photo.
If no picture is selected, all photos in the current folder are
displayed in a slide show. If some photos are selected,
those photos are displayed in a slide show.
• Set Slide Show Speed in the Option → Set Photo View.
menu.
You can listen to music while viewing full-size photos.
• Set BGM in the Option → Set Photo View. menu.
Rotates photos.
• Rotates a photo 90°, 180°, 270°, 360° clockwise.
• Photos cannot be rotated if their width is greater than the
height of the maximum supported resolution.
Enlarges or reduces the photo.
Use the Up/Down/Left/Right buttons to select a page and
press the
Wheel (OK) button.
Option
A setting popup window will appear.
SMARTSHARE
61
Listening to Music
You can play audio files stored on the connected device.
To control music playback
You can control playback using the following buttons.
Changes the playing position.
Item
Description
Plays the previous/next file.
Pauses the music player.
Resumes normal playback.
Sets the repeat playback.
Sets the random playback.
Plays music with the projector screen turned off.
Sets Option for the music list.
• If you use the USB device, time information will be not shown on screen.
62
SMARTSHARE
Viewing Files
You can see document files stored on a connected device.
Supported File Formats
XLS, XLSX, DOC, DOCX, PPT, PPTX, TXT, PDF, HWP
Microsoft Office 97/2000/2002/2003/2007 version
Adobe PDF 1.0/1.1/1.2/1.3/1.4 version
Hangul 2007 version
• File Viewer realigns a document, so it may look different from what is
displayed on a PC.
• For documents that include images, the resolution may look lower during
the realigning process.
• If the document is large or has many pages, it may take longer to load.
• Unsupported fonts may be replaced by other fonts.
• The file viewer may not open for Office documents that contain many
high resolution images. In that case, reduce the image file size, save it
on a USB storage device and run the file viewer again or connect your
PC to the projector and open the file on your PC.
Browsing File Viewer
You can control playback using the following buttons.
• Press the Go Page button to move to the previous or next page.
• Press the
VOL button to zoom in or zoom out.
--Press the
Wheel (OK) button.
--Press the Up/Down/Left/Right buttons to move to Go Page or
Zoom.
Item
Description
Go Page
Moves to the page you specify.
Zoom
Enlarges or reduces the document.
Option
Sets Option for File Viewer.
List
Returns to a list.
SMARTSHARE
63
To Set SmartShare™ Related Functions
Select
(Home) → SMARTSHARE™ → Settings.
Changes settings related to SmartShare™ content playback.
Advanced Setting
Item
Description
My Projector
Name
Changes the name that appears when searching for
the projector from other devices.
Network Status
Checks the network connection.
Wi-Fi Direct
Allows use of wireless connection functions such as
Wi-Fi Direct and WiDi.
Auto Play on
Receive
Choosing whether to ask before playing the content
that is shared by other devices.
DivX(R) VOD
Registers or releases DivX.
Checks DivX Registration Code for playing DivXprotected videos. Register at http://vod.divx.com.
Uses Registration Code to rent or purchase movies
at www.divx.com/vod.
• Rented / purchased DivX files cannot be played
if the DivX Registration Code of a different device
is used. Use only the DivX Registration Code
granted to this device.
• Converted files not conforming to the DivX Codec
Standard may not play or may produce abnormal
images and sound.
Delete History
• To delete contents history, press Delete History button. Use the
contents at Recent menu.
SmartShare™ supporting file
• Maximum data transfer rate: 20 Mbps (Mega bit per second)
• External subtitle formats supported: *.smi, *.srt, *.sub (MicroDVD,
SubViewer 1.0/2.0), *.ass, *.ssa,
*.txt (TMPlayer), *.psb (PowerDivX),
*.dcs(DLP Cinema)
• Internal subtitle formats supported: XSUB (supports internal subtitles
generated from DivX6)
64
SMARTSHARE
Video Supported Codec
Maximum resolution: 1920 x 1080 @ 30p
Extension
.asf
.wmv
.divx
.avi
.mp4
.m4v
.mov
.3gp
.3g2
.mkv
.ts, .trp,
.tp, .mts,
.m2ts
.vob
.mpg
.mpeg
Codec
Video
VC-1 Advanced Profile, VC-1 Simple and Main
Profile
Audio
WMA Standard, WMA 9 Professional
Video
DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/
AVC, Motion Jpeg, MPEG-4 Part 2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, LPCM,
ADPCM, DTS
Video
H.264/AVC, MPEG-4 Part 2
Audio
AAC , MPEG-1 Layer III (MP3)
Video
H.264/AVC, MPEG-4 Part 2
Audio
AAC, AMR-NB, AMR-WB
Video
H.264/AVC
Audio
HE-AAC, Dolby Digital
Video
H.264/AVC, MPEG-2, VC-1
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Video
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III(MP3), AAC
Audio File
File type
Item
Bit rate
mp3
Sample freq.
Support
Info
32 Kbps to 320 Kbps
16 kHz to 48 kHz
MPEG1, MPEG2, Layer2, Layer3
SMARTSHARE
65
Available photo file
File type
2D (jpeg, jpg, jpe)
Item
Info
JPEG
Minimum: 64 x 64
Maximum:
--Normal Type: 15360 (W) x 8640 (H)
--Progressive Type: 1920 (W) x 1440 (H)
To use SCREEN SHARE (Miracast™ / Intel’s WiDi Function)
To Use the Miracast™ / Intel’s WiDi Function
You can view the screen of a device with Miracast™ and Intel’s WiDi
technologies on your projector. Contact the device manufacturer to find out
if the device supports this function.
• Select
(Home) → SETTINGS → NETWORK → Miracast™ / Intel’s
WiDi.
1 Set Miracast™ / Intel’s WiDi to On. (If you do not use it, please
change it to Off.)
2 Enable the Miracast™ / Intel’s WiDi settings on the device that you
want to connect to.
3 A list of devices that can be connected to the projector is displayed.
4 Select a device to connect.
5 Select Yes, when the connection request message appears.
6 If the device that you want to connect accepts the request, Miracast™
/ Intel’s WiDi is connected.
• When Wi-Fi Direct is set to Off, if you set Miracast™ / Intel’s WiDi to
On, Wi-Fi Direct is automatically set to On.
• When you set the Miracast™ / Intel’s WiDi function to Off, Wi-Fi Direct
returns to the previous setting.
66
SMARTSHARE
NOTE
• It is recommended to connect a laptop using Intel’s WiDi within
close range.
• Though Intel’s WiDi can be connected without a wireless router,
it is recommended to connect the wireless router first for optimal
performance.
• You may not connect your projector to a non-LG Electronics device
even when it is detected.
• It is recommended you to connect a device to a 5 GHz router.
• The response rate may vary depending on the user’s environment.
• For more information on the device you want to connect to, refer to
its owner’s manual.
To connect DLNA
DLNA stands for Digital Living Network Alliance, which allows you to enjoy
video / music / photo files stored on a PC or server on your projector via
home networking.
To connect a DLNA-authenticated Smartphone
The Projector and the smartphone should be on the same network.
1 Ensure that Wi-Fi is enabled on the smartphone.
2 Install / run the app to share content on the smartphone.
3 Run Share my mobile phone Content.
4 Select the kind of content (video / music / photo) you wish to play.
5 Select the video, music, or photo file to play on the projector.
6 Select Add to Play List.
7 Select projector name on the device from which you want to play
content. (projector model name is on the label of the device.)
8 Play
shows the selected file on projector.
SMARTSHARE
67
To connect DLNA DMR (Digital Media Renderer)
If the PC's operating system is Windows 7 or Windows 8 or the DLNAcertified device (e.g., mobile phone) is connected via a network, you can
play music / videos / photos on projector without installing a separate
program.
1 Configure Projector and PC on the same network. Configure
Windows 7 or Windows 8-installed PC on the network.
2 Right-click the music / video / photo file that you want to play and use
the Remote Playback feature that comes with Windows 7 or
Windows 8.
To play content from a device such as a mobile phone, refer to the
user guide for the device.
3 Content will be played on one device only even if more than one
projector or device is connected. Play speed can vary depending on
network speed.
To connect a DLNA DMP (Digital Media Player)
With a PC having SmartShare™ PC software, music / video / photo files
may be replayed on the projector via home networking.
1 Configure projector and PC on the same network. The projector and
each device should be connected through a single access point to
enable DLNA service.
2 Install SmartShare™ PC software on the PC from the website. Before
installation, close all running programs including firewall and anti-virus
programs.
3 The sever should be running in order to watch the shared file on your
projector.
• For the website information, go to
(Home) → SETTINGS →
SUPPORT → Product/Service Info..
• For how to use the SmartShare™ PC software, refer to the software
help.
68
SMARTSHARE
SmartShare™ PC SW Installing and Setting
Install the SmartShare™ PC SW (DLNA) program on your PC.
1 Download the setup file from the path below in order to use the DLNA
function. http://liu.lge.com/smartshare/release/smartshare.zip
2 Install the downloaded SmartShare™ PC software.
3 You can run the program when installation is complete.
NOTE
• DLNA or Media Link service is only available if projector and other
devices are connected via a single router.
PC requirement for installing LG SmartShare™
Item
Minimum
Specifications
Recommended
Specifications
CPU
Intel Pentium4 2.0 G or
higher/AMD Sempron
2000 or higher
Intel Pentium Dual Core or
higher/AMD Athlon 64 x 2
or higher
RAM
1 GB or higher
2 GB or higher
VGA
64 MB RAM, 1024 x 768
or higher resolution, and
a video card that supports
16 bit or more colors
128 MB RAM, 1024 x 768
or higher resolution, and a
video card that supports 16
bit or more colors
Hard Disk
Drive
200 MB or higher
Operating
System
Windows XP (Service Pack 2 or later), Windows Vista,
Windows 7, Windows 8, Windows 8.1
l Windows Media Player: 11.0.5721.5280 or higher is
recommended
Network
Environment
100 MB Ethernet, Wireless LAN (WLAN) IEEE 802.11g
or higher
• Program speed can be delayed depending on the system performance
and the network environment.
SMARTSHARE
69
In Case of a DLNA Malfunction
• If a DLNA feature does not work properly, check network settings.
• A 5-GHz access point is needed to view 1080p videos via DLNA.
A 2.4-GHz access point may cause frequent buffering or other problems.
• DLNA may not work properly on a wireless network. It is recommended
to use a wired connection.
• Multi audio and internal subtitles are not supported in DLNA mode.
• If more than one projector is connected to a single server in DLNA
mode, the content may not play depending on server performance.
• Subtitles may not be supported depending on the DLNA device.
• The DLNA feature may not work properly in all network environments.
• The DLNA feature cannot be used with some access points that do not
support multicasting. For more information, refer to access point manual
or consult with the manufacturer.
• Supported file types may differ depending on the DLNA server
environment, even for file types supported by the projector.
• Too many sub-folders and files included in one folder may cause a
malfunction.
• Information about the file from DLNA server may not be displayed
correctly.
• SmartShare™ PC Software is recommended when watching video
subtitles from a DLNA server.
• To add a subtitle file later, turn off the shared folder and reset.
• DRM files located in SmartShare™ PC Software server are not played.
70
SMARTSHARE
To Use a Premium Service
•
(Home) → PREMIUM
• This service gives you easy access to a wide variety of content, such
as video, news, and UCC, at any time, as long as you are connected
to the network. Premium content includes specialized country-specific
services taking regional cultural sensitivities into account as well as
global content.
WEB
Movie
Map
SNS
Play
NEWS
Comic
Entertainment
Information
TV
SMARTSHARE
71
To Use Paid Content
Some Premium Content is provided as for-fee services. To purchase forfee services, use either LG Electronics’ proprietary billing system or that of
each content provider.
If you are using the LG billing system, you can purchase paid content after
signing up for LG Projector.
You can sign up for on the sign-up screen on your projector or the LG
website (www.lgappstv.com). You can then sign into both the projector and
the website with a single ID.
1 Click Sign In button in upper right corner of Home screen to sign in.
2 Move to the desired premium service. (For some premium services,
separate sign-in is required after signing up for the premium service.)
3 After checking the content’s pricing and service information, click the
Purchase button. (There may be limitations on the available period
and number of times depending on content.)
4 Once the purchasing process is completed, view the paid content by
clicking the Buy button.
5 Select your ID on upper menu of Home screen and check history of
purchases from My Page → Payment inquiry. It is also available on
My Page → Purchase History of web site (www.lgappstv.com).
72
SMARTSHARE
To Reset Premium
•
(Home) → PREMIUM → Option → Initialization of Premium
• Premium list, Premium information, country setting, and user sign-in
information will be reset. When an error occurs during Premium update,
a reset will fix the problem.
NOTE
• Content on offer by service providers are subject to change to
enhance their service quality or deletion without any prior notice.
Refer to the web site of each content provider for questions,
troubleshooting, or latest information about Content. LG Electronics
does not take any legal responsibility for content services and
related information including discontinuation of service by the service
provider.
• The quality of premium service may be affected by Internet
connections. For any questions related to Internet speed or any
other service problems, contact the Internet service provider.
• For best service quality, subscribe to an Internet service of 4.0 Mbps
(1.5 Mbps or faster). Contact the ISP (Internet service provider) for
any problems related to Internet speed.
• Content providers may make available content that is unsuitable for
minors. Parental discretion is advised.
SMARTSHARE
73
To Use LG Smart World
• Select
(Home) → MY APPS → LG Smart World.
LG Smart World is a projector application service available through
Projector Service. You can download and enjoy many different apps (for
fee or free) including education, entertainment, life, and news.
1
App 1
App 8
App 15
App 2
App 9
App 16
App 3
App 10
App 17
App 4
App 11
App 18
App 5
App 12
App 19
App 6
App 13
App 20
App 7
App 14
App 21
2
Description
1
Sign in.
When you sign in, ID is displayed.
When you select the ID, you can select My Page and Sign Out.
2
Select the app to install.
74
SMARTSHARE
To Sign Up With LG Smart World
•
(Home) → Sign In
Sign up is required to download and run apps.
1 Select Sign Up and agree to Legal Notice.
2 Enter ID and password.
3 In Confirm Password box, enter password again.
4 Select Wheel (OK) button to complete sign-up process.
NOTE
• You can sign up for membership on either your projector or the
website (www.lgappstv.com).
• After signing up for membership, log into your projector and our
website with the same ID.
• You can sign in to up to five projectors with a single ID.
• The website (www.lgappstv.com) is not available in some countries.
To Install An App On Your Projector
•
(Home) → MY APPS → LG Smart World
Sign up is required to download and run apps.
1 Click the Sign In button at the top of the home screen to log in.
2 Select the LG Smart World card.
3 Select an app you want from the list.
4 Check the details of the app, then select the Install or Buy button.
5 Check that you have the functions or projector accessories required to
install the app, then select the
Wheel (OK) button.
6 For paid apps, payment and purchase authentication is required.
7 Select Run once installation is complete to run the app immediately.
If you do not want to run immediately, select Close. If you want to run
the app later, select My Apps to check the list of apps installed on
projector.
SMARTSHARE
75
NOTE
• You can purchase apps via PC or Projector, but you must use the
Projector to install and run them.
• If you have insufficient storage space on your Projector, you can
download apps to a USB storage device connected through the
Projector's terminal for USB apps. Apps stored on USB can be run /
deleted / moved from the My APPS screen.
• A USB Flash Drive containing apps cannot be used for other data.
(For USB Apps Only)
To Manage My Information
•
(Home) → MY APPS → LG Smart World
1 Sign in.
2 Select the currently signed-in ID at the top of the screen.
3 Select My Page.
4 Manages by examining Member Information, My Purchased Apps List,
and Projector Installed Apps List.
Item
Description
My
Information
Shows basic information about the ID currently signed
in. To change your member information,
visit www.lgappstv.com on your PC
Payment
Inquiry
Shows Payment History of the signed-in ID.
Purchased
Apps
Shows My Purchased Apps List for the signed-in ID.
You can delete / re-install the purchased apps.
76
SMARTSHARE
To Use Search Function
•
(Home) → MY APPS → Search
• You can search apps and contents using the Search function of LG
Projector. When you enter keywords using the input device, such as
the remote control, you can find apps of LG Smart World and some
contents of the Premium service. Links are also provided to go for web
search. If you are using SmartShareTM, you can also search contents of
SmartShareTM. The Search categories and content types vary depending
on the country and will be kept updating.
1
3
2
Description
1
Enter search terms.
2
Category of search results
3
Search results
SMARTSHARE
77
To Use the Voice Recognition Function
Using this Function Through Search
1 Go to
(Home) → MY APPS → Search. Select the voice
recognition icon on the left of the text field.
2 Speak slowly and clearly after the voice recognition window appears.
3 After the voice recognition is completed, the Similar List window
pops up. If the popup window does not have the results you want,
press Retry to try again. Select the most similar result, then it will be
displayed in the text field. Press the Search button to get the result you
want.
Using this Function on the Internet
1 Go to
(Home) → INTERNET. Move the Magic Remote Control
pointer in the text field on a website to open the virtual keyboard.
2 Select the voice recognition icon
virtual keyboard.
on the left of the text field on the
3 Speak slowly and clearly after the voice recognition window appears.
4 After the voice recognition is completed, the Similar List window
pops up. If the pop-up window does not have the results you want,
press Retry to try again. Select the most similar result, then it will be
displayed on the text field. Press the Search button on the website to
get the result you want.
78
SMARTSHARE
NOTE
• The website (www.lgappstv.com) is not available in some countries.
• While the recognised result is in the text field, if you retry the voice
recognition function, the previous result will be replaced with the new
one.
• You can use Voice Search when you press the on the Magic
remote control even if QWERTY keyboard is shown on your screen.
• Check the network connection before using the voice recognition
function.
• It is recommended to use the remote control no further than 10 cm
from your face.
• The voice recognition may fail if you speak too fast or too slowly.
• The recognition rate may vary depending on the user's
characteristics (voice, pronunciation, intonation, and speed) and the
environment (noise and projector volume).
• To change the voice recognition language, go to
(Home) →
SETTINGS → OPTION → Language → Voice Recognition
Language.
• You can set Avatar to On / Off in
(Home) → SETTINGS →
OPTION → See Avatar.
SMARTSHARE
79
To Use Voice Mate Function
What Is Voice Mate?
Voice Mate allows you to search desirable programs and content with your
voice and adjust the projector.
1 Press the voice recognition button on the magic remote control.
2 When the Voice Display bar is activated on the left of the screen, say
what you want to watch.
3 Press the
Wheel (OK) button with the Voice Search standby to see
the supported language in the voice guide.
80
SMARTSHARE
How to Use Voice Mate?
• To use all the functions and services of Voice Mate, you need to set
Smart Wizard and Time. Set up the network, region, auto tuning, and
universal remote control through the Smart Wizard.
• In order to use Voice Mate, you must set up the network, time, region,
and tuning.
• Set the language of your country to use Voice Mate.
• You can change the language for Voice Search in
(Home)
→ SETTINGS → OPTION → Language → Voice Recognition
Language.
• You can turn the avatar On/Off in
(Home) → SETTINGS →
OPTION → See Avatar.
• Point the universal remote control towards the set-top box when you use
Voice Mate with it.
• When speaking a command, hold the remote within 10 cm of your face.
• The voice search may fail when you speak too fast or too slow.
• The recognition rate of Voice Mate may vary depending on the user’s
characteristics (voice, pronunciation, intonation, and speed) and the
environment (noise and projector volume).
• If your voice is not recognized properly, Voice Mate may function in an
unwanted manner.
What Are Other Functions of Voice Mate?
You can access various projector features using Voice Mate.
Item
Description
Channel
You can tune TV channels and search channel
information.
Recommendation
and Search
You can recommend and search TV programs
and content files.
Information and
Internet
You can also search other information such as
today’s weather.
• Available functions may vary depending on the country.
• For more supported examples, see the voice user guide.
SMARTSHARE
81
See Avatar
Using the Avatar
•
(Home) → SETTINGS → OPTION → See Avatar
You can use the avatar when you use voice recognition. You can check
the voice recognition status via the message from the avatar and it helps
you to enter your speech correctly.
• If you set See Avatar to On, the avatar is activated on the bottom right
of the screen.
• The voice recognition is still supported, even if See Avatar is set to Off.
• The speech balloon guide of See Avatar may vary depending on voice
recognition features, languages, and models.
82
SMARTSHARE
What Is On Now?
On Now allows you to select and watch recommended programs currently
available on your projector. The Favorite function allows you to select and
watch recommended content related to the program you are watching.
To Use On Now
To see in Mini view
1 (Home) → MY APPS → On Now
1
2
Description
1
Refreshes all list items and moves to the beginning of the screen
simultaneously.
2
Moves to Full View.
SMARTSHARE
To See in Full View
•
(Home) → MY APPS → On Now → More
1
2
3
4
5
Description
1
Sign in
2
Search
3
Refreshes all the list items and moves the screen up
simultaneously.
4
Move to Mini view
5
Sets the options.
83
84
SMARTSHARE
• For TV channels, you need to complete Auto Tuning to use this service
properly.
• If you move to a different region, you need to set the region to your
current location in order to use this service.
• The digital EPG (Electronic Program Guide) information which the TV
receives may be different from the programs on the On Now TV list
which uses an external EPG (Electronic Program Guide).
• You can control a connected set-top box tuner with the Magic Remote
Control.
• An internet connection is required to use On Now.
• The channels in the On Now TV list are provided from the Service
Operator. If the Service Operator changes them without notice, the
actual TV channels may differ.
• The channel names of Service Operator on the On Now TV list are
provided from an external EPG (Electronic Program Guide), so each
name refers a Service Operator but may not match.
• The program thumbnail image on the On Now TV list is the
representative image of the program, and it may be different from the
image of the actual TV program schedule.
• If the channel information on the On Now TV list is different from the
actual TV channel, set the channel menu in the On Now Settings.
• The On Now function recommends content based on real-time ratings,
and certain content with low ratings may not be displayed.
• A scrambled channel may be displayed occasionally, depending on the
TV signal type.
• The On Now function may not work with some set-top box models.
• If you experience problems with settings or operation, please tell us the
name of your set-top box model on our website (http://www.lgappstv.
com/ur_support) so that we can take action to provide appropriate
support.
SMARTSHARE
85
To Use Internet
•
(Home) → INTERNET
• Types URL manually on projector or visits websites added to favorite.
1
2
3
Description
1
Types in the web address.
2
Chooses when you open several web browsers.
3
Add the current page to favorites.
• Internet supports up to Flash 11 but does not support platformdependent technology like ActiveX.
• Internet only works with a pre-installed plug-in.
• Internet may not play any media file format other than the following:
JPEG / PNG / GIF
• Internet will be forcibly closed when there is insufficient memory.
• For the Internet, fonts installed on the projector are used and may not be
displayed normally depending upon the content played.
• Internet does not support file and font download.
• Internet is made for projector so it may function differently than browsers
made for PC.
• Internet is a projector browser and may not work properly when playing
some content files.
86
SMARTSHARE
Frequently Asked Questions for Projector
Sign up is required to use LG Smart World.
You can sign up on either your projector or the LG website
(www.lgappstv.com). Free apps are available immediately after signing up.
You can purchase paid apps using your credit card registered with the
website or credits. Paid apps can also be purchased through carrier billing.
Problem
Solution
When entering
menu, the Initializing
message always
appears.
• The Initializing message shows you how
long it takes to reboot the microprocessor
and hardware, set up network
communications, and communications
with SDP (device authentication and basic
information download). It takes about 20
seconds and this is a normal process.
There is no content
shown on the
Premium card.
• Content may not be shown after changing
the country setting on projector. Change to
desired country in
(Home) → SETTINGS → OPTION →
Service Country Setting
While using internet
features, there is
a blank space on
some Web pages.
• The internet of the Projector supports up to
Flash 11 and may not replay any file format
other than the following: JPEG, PNG, GIF
Internet closes
automatically when
visiting website.
• If memory is insufficient because of large
volume of image information in the web
page, the browser may be forced to close.
I already signed up
on projector. Do
I need to sign up
again at web site (www.lgappstv.
com)?
• If you sign up on your projector, no
additional sign-up on the LG website
(www.lgappstv.com) is required.
• After signing up on the projector, you can
sign into the website by using the same ID
and password and entering the additional
information to complete the email verification
process.
SMARTSHARE
Problem
87
Solution
Can each family
member use a
different ID with a
single projector?
• It is possible to register and use more than
one ID on one projector.
• To check the ID registered with Projector
from
(Home) → Sign In → ID List.
• You can check the list of apps purchased
by each ID. However, you can see all apps
installed by each ID in
(Home) → Sign In → My Page.
What should I do if I
forget my ID?
• After signing up on a PC, use the Forgot
ID? feature on web site (www.lgappstv.com)
when needed.
• After signing up on projector, check it from
(Home) → Sign In → Find ID.
I purchased an app
from the LG web site
(www.lgappstv.com).
How can I use it on
the projector?
• To check purchased apps from the
projector, sign in and open the Purchased
Apps menu.
• Select the ID at the top of Home and check
the app in My Page → Purchased apps.
Can I see history of
my purchased apps?
• Select the ID at the top of Home and check
the app in My Page → Purchased apps.
• Sign in to website (www.lgappstv.com) and
then select My Page → Purchase History.
I deleted a paid
app. Do I have to
purchase again to
download it?
• If a purchased app is accidentally deleted, you
can download and reinstall it without having to
buy it again, as long as it is still in service.
• Select the ID at the top of Home and redownload apps in My Page → Purchased
apps. (Previously owned apps may not be
re-downloaded or run, depending upon the
software version.)
88
SMARTSHARE
Problem
Solution
Can I use apps from
LG Projector’s LG
Smart World on both
a projector and a
PC?
• Please check if the projector model supports
LG Smart World.
• The apps provided from LG Projector's LG
Smart World can be used only on an LG
Projector.
• Apps may be purchased from the website
(www. lgappstv.com) but cannot be used on
a PC or Mac. Use care when purchasing.
How can I check the
ID currently signed
in on the projector?
• Select the ID at the top of Home and check
the currently signed-in ID in My Page → My
Information.
I installed an app on
the projector. Where
can I check the
installed app?
• Select
(Home) → MY APPS. All paid
and free apps installed on Projector are
displayed.
There is a difference
between the app size
shown on the screen
and the actual app
size installed on
projector.
• The app size shown in the screen includes
the additional space needed for installing
apps so it may be different from actually
installed app size.
I forgot my
password on the
projector. What
should I do?
• If you only provide the ID and password
when signing up on your projector, you
cannot recover your password when it is
lost. Create a new ID and sign up with the
ID.
• If you provide other information than the
ID and password when signing up on your
projector or the LG website (www.lgappstv.
com), you can recover your password on
the website.
SMARTSHARE
89
Problem
Solution
Do I need to store
payment information
in web site to
purchase paid apps?
• The following payment methods are
available to purchase paid apps on your
projector: credit card, credits, and carrier
billing.
• To purchase paid apps using your credit
card or credits, you should have a credit
card registered with the LG website
(www.lgappstv.com) or have enough credits.
Paid apps can also be purchased through
carrier billing if your credit card details are
not registered with the website or you do
have enough credits. If you purchase paid
apps on the website, the following payment
methods are available: credit card or credits.
Can I cancel an
app that I have
purchased?
• As a member, you cannot demand refund
just because you changed your mind after
purchase.
• If there is a defect in the product or a
problem of using the product, which is
not your fault, you can ask for a refund.
However, the valid reason for refund must
be provided.
Should I use only an
email address for
my ID?
• For new sign-up members, the ID format
has changed from a combination of
alphanumerics to your email address.
• You can only use an email address for your
ID when signing up.
Do I need to change
my ID format to the
email address?
• For new sign-up members, the ID format
has changed from a combination of
numbers and alphabets to the email
address.
• If you are already a member, you can still
use your existing ID or change it to the email
address.
90
SMARTSHARE
Problem
What is the LG
account?
Solution
• The LG account allows you to sign into all
of the LG Smart service with a single ID
and password. You can use the following
services with your LG account:
LG Projector, LG Cloud, LG Smart World
(excluding some countries), LG Smart
ThinQ, and LG Smart air conditioning, etc.
Additional information may be required
depending on the service.
USING ADVANCED FUNCTIONS
91
USING ADVANCED FUNCTIONS
To Use Screen Remote
To Use Screen Remote
Press the
button on the magic remote control.
Select a button on the screen remote displayed on the screen using the
magic remote control.
• The type of buttons on the screen remote varies depending on the
region or the type of a connected device.
• Image shown may differ from your projector.
Change
Device tab
TV operation
buttons
Exits the Screen
Remote
Moves the
position of the
Screen Remote
to left or right
To Control a Device Connected to the Projector Using
the Screen Remote
You can control a device connected via SIMPLINK or MHL using the
Screen Remote.
1 Check if the device is connected to the Projector.
2 After pressing the
button on the magic remote control, select
the device you want to control in the Change Device tab. The screen
remote that can control the device appears.
--This may not work with some buttons.
92
USING ADVANCED FUNCTIONS
To Use the Universal Control function
With the Magic Remote control, you can control a set-top box, Blu-ray
player, home theater system, etc.
1 Check if a device you want to set is connected to your projector.
2 After pressing the
button on the Magic Remote control, select
the icon of a device you want in the change device tab.
If there is no device you want, press the
on the tab, and select the
external device you want. Once the setup is complete, the name of the
selected device is displayed in the Change Device tab.
3 When you select a device you want in the Change Device tab, the
Screen Remote that can control the device appears on the screen.
To see more control buttons, select
at the bottom of the Screen
Remote.
To change or clear the Universal Control settings
1 After pressing the
the
button on the magic remote control, select
(TV/input selection) button.
2 Select Change Setting or Cancel Setting at the bottom of the device
to be changed.
• When change setting, check if the power of the device to be changed is
turned on.
• You can set one device per type.
• With the screen remote, you can only control the devices of a brand or
manufacturer that you can select in the setup screen.
• If you connect to a network before setting the universal remote control,
update for the latest manufacturer list is available.
• Some buttons may not work depending on the external device model.
• Place the device near the projector for seamless operation.
• If the device is in a drawer, open the drawer.
• Go to
(Home) → MY APPS → Universal Control or
(Home) →
INPUT LIST → Set the Universal Control and add, delete, or change
a device.
• Please be advised that the channel tuning feature may not work properly
if you have already manually assigned channel numbers that differ from
the original set-top box channel numbers.
USING ADVANCED FUNCTIONS
93
To Control a Projector Using a Smartphone
You can download the LG TV Remote app from Google Play Store
or Apple App Store and use it on any projector connected with your
smartphone.
--Now you can enjoy your favorite projector shows on your smartphone.
(Some models only.)
--You can easily enter your account information to log in.
--You can add your favorite channels on your smartphone.
--You can use the functions such as PREMIUM, MY APPS, and
SMARTSHARE™ directly on your smartphone.
--The text input function is supported, so you can enter text easily. (Text
cannot be entered on some screens.)
--Select the app’s touch pad to control in the same way the pointer of the
magic remote control works.
--Keypad which allows you to control the set-top box and media devices
is provided. (Some models with specified conditions only.)
--You can set the projector to the power-saving mode while watching
projector on your smartphone.
94
USING ADVANCED FUNCTIONS
To Use a USB Input Device On a Projector
To Use a USB Wired/wireless Mouse
Connect your mouse to the USB port. Use the mouse to move the pointer
on the Projector screen and select the menu you want.
Mouse
Magic Remote Control
Left Button
OK Button on Magic Remote Control
Wheel Button
Wheel Button on Magic Remote Control
• The right mouse button and any special buttons will not work with the
Projector.
• The usability of a wireless USB mouse and keyboard may be affected by
the radio frequency environment and the distance.
To Use a USB Wired/wireless Keyboard
Connect your keyboard to the USB port. You can enter text with the
keyboard when using the search function and the Internet.
• Text cannot be entered on some screens.
• It is recommended to use a product which is tested for compatibility with
the LG Projector.
LOGITECH K200, LOGITECH K400, MICROSOFT Comfort Curve
2000, MICROSOFT MS800, and LG Electronics ST-800
• You can change the input language by pressing the language switch key
(or the right Alt key) on your keyboard.
CUSTOMIZING SETTINGS
95
CUSTOMIZING SETTINGS
SETTINGS
1 Press the (Home) button and select SETTINGS.
2 Use the or button to select the desired item and press the
Wheel (OK) button.
3 Use the
the
, , , or button to set up the desired item and press
Wheel (OK) button.
4 Press the
button when completed.
Menu
Description
PICTURE
Adjusts the image quality for optimal viewing.
SOUND
Adjusts the sound quality and volume level.
CHANNEL
Sets up or edits a channel.
TIME
Sets the time and time-related features.
LOCK
Locks or unlocks a channel or a program.
OPTION
Customizes the general settings.
NETWORK
Sets the network.
SUPPORT
Shows the projector information.
96
CUSTOMIZING SETTINGS
PICTURE Settings
1 Press the (Home) button
and select SETTINGS.
2 Use the
or buttons to
select PICTURE and press the
Wheel (OK) button.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available picture settings are described as follows.
Menu
Energy Saving
Description
Reduces power consumption by adjusting peak
screen brightness.
MODE
Applies the pre-set Energy Saving
mode.
Minimum/
--If Energy Saving is set to
Medium/
Minimum and the ambient
Maximum
temperature is 35 °C or higher,
Energy Saving will be disabled.
CUSTOMIZING SETTINGS
Menu
97
Description
Picture Mode
Selects the picture mode optimized for the viewing
environment or the program. You can also
customize advanced options for each mode.
MODE
Maximizes the visual effect of video.
Vivid
Heightens contrast, brightness, and
sharpness to display vivid images.
Displays images in standard levels of
Standard
contrast, brightness, and sharpness.
Cinema
Optimizes the image for a movie.
Optimised picture mode for sport. The
pitch and kits are presented in vibrant
Sport
colors, with crystal-clear images even
for fast movements.
Optimizes the image for playing games
Game
on fast-moving screens.
Menu for adjusting picture quality that
allows experts and amateurs to enjoy
the best projector viewing.
Expert1 /
--Expert mode is for picture tuning
Expert2
professionals to control and fine-tune
using a specific image. For normal
images, the effects may not be
dramatic.
Contrast
Adjusts the difference between bright and dark
regions of the screen.
Brightness
Adjusts the overall screen brightness.
Sharpness
Adjusts the sharpness of the borders between
bright and dark. Horizontal and Vertical Sharpness
are available only in Expert1 / Expert2.
Color
Adjusts the colors on the screen darker or lighter.
Tint
Adjusts the red/green color balance.
Advanced
Control (Expert
Control)
Customizes the advanced settings.
98
CUSTOMIZING SETTINGS
Menu
Description
Picture Option
Sets optional settings.
Picture Reset
Resets values customized by the user.
Each picture mode is reset. Select the picture mode
you wish to reset.
Aspect Ratio
Resizes the picture.
Picture Wizard
III
Use the remote control and follow the instructions
of the Picture Wizard to calibrate and adjust for
optimum picture quality without expensive pattern
devices or help from a specialist. Follow the
instructions to obtain the optimum picture quality.
Advanced Control
Menu
Description
Dynamic
Contrast
Adjusts contrast and color to the optimal level according
to the screen’s brightness.
Dynamic
Color
Adjusts colors for more natural-looking colors.
Color
Gamut
Selects the range of colors that can be expressed.
• Standard: Displays the original colors of an input
signal regardless of the display features.
• Wide: Makes use of the display's rich colors.
Preferred
Color
Skin Color
Skin color spectrum can be separately
set to implement the skin color as
defined by the user.
Grass Color
Natural color spectrum (meadows, hills,
etc.) can be set separately.
Sky Color
Sky color is set separately.
Super
Resolution
Provides a crystal-clear picture by improving the details
in areas where the picture is blurry or unclear.
Gamma
Sets the gradation curve according to the output of the
picture signal in relation to the input signal.
CUSTOMIZING SETTINGS
99
Expert Control
Menu
Description
Dynamic
Contrast
Adjusts contrast and color to the optimal level
according to the screen’s brightness.
Super
Resolution
Provides a crystal-clear picture by improving the
details in areas where the picture is blurry or unclear.
Color Gamut
Selects the range of colors that can be expressed.
• Standard: Displays the original colors of an input
signal regardless of the display features.
• Wide: Makes use of the display's rich colors.
Edge
Enhancer
Shows clearer and distinctive yet natural edges of
the video.
Color Filter
Filters a specific color spectrum in RGB colors to
fine-tune color saturation and hue accurately.
Expert Pattern
Patterns used for expert adjustment.
Gamma
Sets the gradation curve according to the output of
the picture signal in relation to the input signal.
Adjusts white balance. Detailed adjustment is
possible as shown below.
White Balance
a. Method 2 Points
--Pattern Inner, Outer
--Points Low, High
--Red/Green/Blue The adjustment range for
each color is from -50 to +50.
--Apply to all inputs The values of the White
Balance is applied to all the input modes.
b. Method 20 Point IRE
--Pattern Inner, Outer
--IRE (Institute of Radio Engineers) is the unit
indicating the size of a video signal and can
be set to 5,10,15, ... 100. You can fine-tune for
each setting as shown below.
--Red/Green/Blue The adjustment range is -50
to +50.
--Apply to all inputs The values of the White
Balance is applied to all the input modes.
100 CUSTOMIZING SETTINGS
Menu
Color
Management
System
Description
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow
colors. Allows an expert to adjust the tint using a test
pattern. Six colors (Red/Green/Blue/Cyan/Magenta/
Yellow) can be selectively adjusted without affecting
other colors. You may not see colors change on a
normal picture even after adjustment.
--Saturation Red/Green/Blue/Cyan/Magenta/
Yellow, Tint Red/Green/Blue/Cyan/Magenta/Yellow,
Luminance Red/Green/Blue/Cyan/Magenta/
Yellow:
The adjustment range is -30 to +30 each.
* Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
CUSTOMIZING SETTINGS
101
Picture Option
Menu
Description
Noise Reduction
Reduces screen noise in the video.
MPEG Noise
Reduction
Eliminates noise generated while creating digital
picture signals.
Black Level
Adjusts the brightness or darkness of the screen
to suit the black level of the picture input using the
degree of darkness (black level) of the screen.
Real Cinema
Optimizes the screen for movie viewing.
Corrects images to display smoother motion
sequences.
Mode
TruMotion
Color
Temperature
Smooth
De-Judder value is set to 3.
Clear
De-Judder value is set to 7.
User
De-Judder can be set manually.
• De-Judder This function adjusts
juddering of the screen.
Off
De-Judder value is set to 0.
Adjusts the overall color of the screen to suit your
preference.
Select Warm, Natural, Cool, or Medium.
* If the video signal is 60 Hz, TruMotion may not work.
102 CUSTOMIZING SETTINGS
SOUND Settings
1 Press the (Home) button
and select SETTINGS.
2 Use the
or buttons to
select SOUND and press the
Wheel (OK) button.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available sound settings are described as follows.
Menu
Smart
Sound
Mode
Description
Provides the optimized sound adjusted for each content
type.
• If the Smart Sound Mode function is enabled, Sound
Mode, Virtual Surround Plus and Clear Voice ll are
automatically adjusted.
Sets the sound mode.
Mode
Sound
Mode
Virtual
Surround
Plus
Standard
Suitable for all types of video.
News / Music
/ Cinema /
Sport / Game
Sets audio optimized for a specific genre.
User Setting
Adjusts volume level.
• 100 Hz / 300 Hz / 1 kHz / 3 kHz /
10 kHz: Sets EQ by manual
adjustment of sound bands.
• Reset: Resets the equalizer value
changed by the user.
Provides realistic 5.1 channel stereo sound from two
speakers.
• If Clear Voice ll is set to On, Virtual Surround plus
will not be chosen.
CUSTOMIZING SETTINGS
Menu
Clear
Voice II
103
Description
Boosts voice clarity.
Sets various modes for volume control.
Mode
Volume
Mode
Auto Volume
Sets Auto Volume to On. The volume
varies from channel to channel and
program to program. When clicking
through the channels, the volume is
adjusted automatically to maintain the
same level.
Sets the audio output of the projector.
Mode
Sound Out
Projector
Speaker
Sound is output through the projector
speaker.
External
Speaker
(Optical/
HDMI ARC)
Sound is output through the speaker
connected to the optical port. SIMPLINK
is supported.
• Digital Sound Out Sets up Digital
Sound Output.
LG Sound
Sync
(Optical)
Sound is output through an LG audio
device connected to the OPTICAL
DIGITAL AUDIO OUTPUT port.
Bluetooth
Sound output is through the Bluetooth
device.
Headphone
Sound is output through headphones.
• Headphones are detected and
connected automatically when the
projector is on.
104 CUSTOMIZING SETTINGS
Menu
Description
Synchronizes video and audio directly when they do
not match. If you set AV Sync. Adjust to ON, you can
adjust the sound output (projector speaker, SPDIF, or
Bluetooth) to the screen image.
Mode
Projector
Speaker
Adjusts the synchronization of the
sound from the projector's internal
speakers.
The + and - buttons allow the viewer to
synchronize the audio with the video.
External
Speaker
Adjusts how the sound is synced to
external speakers, such as an external
speaker connected to the digital audio
output port, LG audio device, projector
speaker, SPDIF, and headphone.
The + and - buttons allow the viewer to
synchronize the audio with the video.
Bluetooth
Adjusts the synchronization between the
video and the Bluetooth device sound.
--This feature is only available when a
Bluetooth device is connected.
--Audio sync may vary by
manufacturer.
--When playing video and music from
a connected USB drive, AV Sync.
Adjust can also be adjusted using
the Set Audio. menu.
Bypass
Outputs broadcasting signals or the
audio of an external device without
audio delay. Audio may be output
before video as it takes time to process
video input into the projector.
AV Sync.
Adjust
Sound
Option
Setting
Balance Adjusts left/right audio balance.
CUSTOMIZING SETTINGS
105
CHANNEL Settings
1 Press the (Home) button
and select SETTINGS.
2 Use the
or button to select
CHANNEL and press the
Wheel (OK) button.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available channel settings are described as follows.
Menu
Description
Auto
Tuning
Remembers a channel which is currently broadcasting.
You should use this function when you move to another
house or move the projector to other place. It must be used
while the antenna is connected and there are channel
broadcasting signals.
• Channels are not registered properly unless the antenna/
cable is connected correctly.
• Auto Tuning finds only programs that are currently
broadcasting.
• If Lock System is turned on, a pop-up window will
appear asking for password.
Manual
Tuning
Adjusts programs manually and saves the results.
For digital broadcasting, signal strength, and signal quality
can be checked.
Channel
Edit
Edits the saved channels.
Set as favorite channel, block/unblock channel, delete
channel etc., of the selected channel.
106 CUSTOMIZING SETTINGS
TIME Settings
1 Press the (Home) button
and select SETTINGS.
2 Use the
or button to select
TIME and press the
Wheel
(OK) button.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available time settings are described as follows.
Menu
Description
Checks or changes the time while watching projector.
Mode
Clock
Auto
Synchronizes the projector clock to the digital
time information sent by the TV station.
Manual
Sets the time and date manually if the auto
setup does not correspond to the current
time.
Off Time/
On Time
Sets On/Off time. Select Off on Repeat to discontinue
On Time/Off Time.
• To use On Time/Off Time, set the current time
correctly.
• Even when the On Time function is on, the projector
will turn off automatically in 120 minutes when no
button is pressed within that time.
Sleep
Timer
Turns off the projector after a preset number of minutes.
To cancel the Sleep Timer, select Off.
Auto Off
If there is no input signal or button press, the projector
automatically turns off after the preset time has elapsed.
Automatic
Standby
If you do not press any button on the projector or
remote control for a certain period, the projector will
automatically turns off.
CUSTOMIZING SETTINGS
107
LOCK Settings
1 Press the (Home) button
and select SETTINGS.
2 Use the
or button to select
LOCK and press the
Wheel
(OK) button.
--To enter the LOCK menu,
enter the preset 4-digit
password. The initial
password is set as 0000.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available lock settings are described as follows.
Menu
Set
Password
Description
Sets or changes projector password.
• The initial password is set as 0000.
Permits only specific programs by blocking channels or
external input.
Select the Lock System to On.
Item
Lock
System
Block
Channel
Blocks the programs that contain
inappropriate contents for children.
The programs can be selected but
the screen is blank and the audio is
muted. To watch a locked program,
enter the password.
108 CUSTOMIZING SETTINGS
Menu
Description
Movie Rating
Lock
System
TV RatingChildren
Blocks the movies that are only
broadcast on the TV and contain
inappropriate contents, based on the
Motion Picture Association of America
(MPAA) rating.
• G (General audiences) All ages
admitted
• PG (Parental guidance suggested)
Some material may not be suitable
for children
• PG-13 (Patents strongly cautioned)
Some material may be inappropriate
for children under 13
• R (Restricted) Under 17 requires
accompanying parent or adult
guardian
• NC-17 No one 17 and under
admitted.
• X Adults only
Blocks the children’s TV programs that
parents do not want their children to
watch. To block other TV programs,
you should set the TV Rating-General
feature.
• Age TV-Y (All children, including
children from ages 2-6), TV-Y7
(Directed to older children, suitable
for children age 6 and above)
• Fantasy Violence TY-Y7 (Directed
to older children - Fantasy violence,
suitable for children age 6 and
above, containing more intense or
combative fantasy violence)
CUSTOMIZING SETTINGS
Menu
109
Description
TV RatingGeneral
Blocks the TV programs that you want
based on the ratings by using the
Parental Control Function (V-Chip).
The V-Chip electronically reads TV
program ratings and allows parents to
block program that are unsuitable for
children.
• Age TV-G (General audience,
suitable for all ages) TV-PG
(Parental guidance suggested,
containing material that are
unsuitable for younger children)
TV-14 (Parents strongly cautioned,
containing material that are
unsuitable for children age 14 and
under) TV-MA (Mature audience
only, unsuitable for children age
• Dialogue (suggestive dialogue) TVPG or TV-14
• Language (coarse language)TVPG, TV-14, or TV-MA
• Sex (sexual situation) TV-PG, TV14, or TV-MA
• Violence TV-PG, TV-14, or TV-MA
Downloadable
Rating
This function operates only when TV
has received Region 5 Rating data.
The name of the rating option may
differ.
Input Block
Block the input sources.
Application
Lock
Lock the application.
Lock
System
110 CUSTOMIZING SETTINGS
OPTION Settings
1 Press the (Home) button
and select SETTINGS.
2 Use the
or button to select
OPTION and press the
Wheel (OK) button.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available option settings are described as follows.
Menu
Description
Selects Menu Language, Audio Language and Voice
Recognition Language displayed on the screen.
Item
Language
Menu
Language
Selects a screen menu language.
Audio
Language
Selects the desired language when
watching digital broadcasting containing
several audio languages. (In digital
mode only)
Voice
Recognition
Language
Select the language to make voice
search.
CUSTOMIZING SETTINGS
Menu
Service
Country
Setting
ZIP Code
111
Description
You can change the country setting of your smart
projector. The premium service and LG Smart World
that are available for the country you selected will be
provided.
• If a network is disconnected while setting the service
country, it may not be set properly.
Item
Auto
Setting
A service country is automatically set for
your smart projector.
Manual
Setting
A service country can be set manually
for your smart projector.
You can check the information of area when network is
connected.
• This function sets your area as the ZIP Code.
• You can check the information of area when network
is connected.
View subtitles when the TV station provides subtitled
programing. Program subtitles work only on digital/
analog broadcasts or external input.
Change Caption to On and select caption setting.
Caption
Mode
CC 1-4 (Closed Captioning) / Text 1-4
Displays the audio portion of a TV
program as text on the TV screen. CC 1
is the most common mode in use.
Field 1 data channels: two Captions
(CC 1, CC 2), two Text (Text 1, Text 2).
Field 2 data channels: two Captions
(CC 3, CC 4), two Text (Text 3, Text 4).
Service1-6
This is only available for the digital
broadcasting system.
112 CUSTOMIZING SETTINGS
Menu
Description
Set up the size and color of the subtitles
on Digital Option. Please select Set by
Program or Custom.
Select Custom to adjust minute options
such as the subtitles’ size and color.
Item
Caption
Set the
Universal
Control
Digital
Option
Size
Selects the wordsize.
Font
Selects a typeface for
the text.
Text Color
Selects a color for the
text.
Text
Opacity
Adjusts the opacity for
the text color.
Bg Color
Selects a color for the
background color.
Bg Opacity
Adjusts the opacity for
the background color.
Edge Type
Selects an edge type.
Edge Color
Selects a color for the
edges.
Window
Color
Selects a color for the
window color.
Window
Opacity
Adjust the opacity for the
window color.
With the magic remote control, you can control a set-top
box, Bluray player, home theater system, etc.
CUSTOMIZING SETTINGS
Menu
113
Description
Sets the speed and shape of the pointer that appears
on the projector screen.
Speed
Sets the moving speed of the pointer.
Shape
Selects a pointer shape from various
options.
Size
Chooses the size of the pointer.
Alignment
Set to On. If there is any misalignment
between the pointer and the actual
direction the remote control indicates,
move the Magic Remote control left
and right to realign. The pointer will
automatically realign to the center,
making it easier to control.
• If it is set to Off, the alignment
function will not work even when you
move the magic remote control left
and right.
Pointer
PJT Mode
Auto
Keystone
This function turns the projected image upside down or
flips horizontal.
Auto Keystone provides a rectangular screen image
by automatically adjusting the keystone number when
there is a trapezoidal screen image caused by tilting of
the projector.
When using Auto Keystone, the current value set for
Edge Adj is changed to the value that has been set
with Auto Keystone.
Item
Edge Adj
On
Automatically adjusts the keystone
number.
Off
Manually adjusts the keystone number.
To prevent the screen image from becoming
trapezoidal, Edge Adj adjusts the top and bottom width
of the image if the projector is not set at a right angle to
the screen.
114 CUSTOMIZING SETTINGS
Menu
Description
Makes the projector turn on automatically when the
power code is connected to the projector.
Item
Auto Power
On
When the power code is connected to
the projector, it turns on automatically.
Off
When the power code is connected to
the projector, it goes into standby mode.
High
Altitude
If the projector is used at an altitude higher than
1200 meters, turn this on.
Otherwise, the projector may overheat or its protection
function may be activated. If this happens, turn the
projector off and then on again after waiting for several
minutes.
Auto Input
Search
Automatically searches for and displays the input signal
type when it is received. It is available only with external
inputs (HDMI, AV, and Component).
Balloon
Help
Enables/disables the balloon help.
Control
Device List
Displays the list of control devices connected to the
projector.
See Avatar
Turns the Avatar function on or off.
Initial
Setting
Deletes all optional settings and returns to initial default
mode. Once initialization is complete, the projector will
turn off and on by itself.
• If Lock System is activated, a pop-up password
prompt will appear.
• Do not turn off the power during initialization.
Mode
Setting
Selects Standard or Store. For use at home, select
Standard. Store is a mode used for store display.
CUSTOMIZING SETTINGS
115
NETWORK Settings
1 Press the (Home) button
and select SETTINGS.
2 Use the
or button to select
NETWORK and press the
Wheel (OK) button.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available network settings are described as follows.
Menu
Description
Network
Connection
Connects a network.
Network
Status
Displays the connection status of the network.
This function allows you to change a wired Internet
connection to your projector to Wi-Fi, allowing you to
connect various external devices or to use wireless
Internet.
Soft AP
Soft AP
Sets to On/Off.
Security
Key
Sets the Wi-Fi security number.
• You can set the security key with a
combination of English letters and
numbers between 8 and 64 characters
long.
• The default setting is LG123456.
• To enable the Soft AP function, your projector must
be turned on and have a wired Internet connection.
• Up to four external devices can be connected.
• If the Soft AP function is enabled, the Wi-Fi Direct
and MiracastTM functions become unavailable. You
must set the Soft AP function to Off to use the Wi-Fi
Direct and MiracastTM functions.
116 CUSTOMIZING SETTINGS
Menu
Description
Wi-Fi Direct
Wi-Fi Direct is a function that allows your projector
to connect with a Wi-Fi Direct device without Internet
connection.
MiracastTM /
Intel's WiDi
The MiracastTM allows you to enjoy video and audio
from a portable device through the projector wirelessly.
Intel's WiDi allows you to view a laptop screen through
the projector without a cable.
My
Projector
Name
Changes the name that appears when searching for the
projector from other devices.
CUSTOMIZING SETTINGS
117
SUPPORT
1 Press the
(Home) button
and select SETTINGS.
2 Use the
or button to select
SUPPORT and press the
Wheel (OK) button.
3 Use the
, , , or
button to set up the desired item
and press the
Wheel (OK)
button.
--To return to the previous
menu, press the
button.
The available support settings are described as follows.
Menu
Description
Software
Update
Updates to the latest software.
Picture Test
Check whether a video signal is properly displayed.
Sound Test
Check whether an audio signal is properly output.
Product/
Service Info.
Shows the product/service information.
LG Remote
Projector
Service
Remotely solve any question following an update by
contacting the Service Center staff by phone.
Initialization
of App
If problems occur after updates, try initializing the
system.
• During initialization, the projector will restart
automatically.
Legal
Documents
You can check the contents of Legal Documents and
you can make a choice whether to agree or withdraw
your consent to Legal Documents.
Self
Diagnosis
Troubleshoots functional problems that can arise while
using the product.
118 CONNECTING DEVICES
CONNECTING DEVICES
You can connect various external devices to the projector.
Computer/Notebook

USB
Digital Device
Video/DVD
LG Audio Device
Games
Console
Headphone
Mobile Phone
HDMI - Page 119
Composite (AV) - Page 120
Component - Page 121
USB Device - Page 55
Headphone - Page 124
Digital Amp - Page 124
Mobile Phone (MHL) - Page 126
CONNECTING DEVICES
Connecting to HD
Receiver, DVD, or
VCR Player, External
Devices
Connect an HD receiver, DVD,
VCR player, or external devices
to the projector and select an
appropriate input mode.
HDMI Connection
With an HDMI cable, you can enjoy
high quality picture and sound.
Using a HDMI cable, connect the
port of the projector
to the HDMI output port of the
device to connect. Both video and
audio are output at the same time.
You can also use the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Optional Extras
119
NOTE
ARC(Audio Return Channel)
• External audio devices that
support SIMPLINK and ARC
must be connected using
port.
• When connected with a
high-speed HDMI® cable,
external audio devices
that support ARC output
or SPDIF work with the
SIMPLINK function without
the need for an additional
optical audio cable.
120 CONNECTING DEVICES
HDMI to DVI Connection
AV Connection
Using an HDMI to DVI cable,
connect the projector's
port to the DVI OUT
port.
To output audio, use an audio
cable for connection. You can also
use the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Connect the output ports of an
external device and the AV IN
ports of the projector using an AV
cable. Press the INPUT button on
the remote control to select AV.
Check whether cables of the same
color are connected properly.
Accessories
White
Red
Yellow
White
Red
Not
provided
Yellow
Optional
Extras
Not
provided
Red
White
DVI OUT
Yellow
AUDIO OUT
CONNECTING DEVICES
Component Connection
You can enjoy a video by
connecting the component port
of an external device to the
COMPONENT IN port of the
projector. Press the INPUT button
on the remote control to select
Component. Check whether
cables of the same color are
connected properly.
Accessories
Accessories
Red
Red
Red
White
Red
Blue
White
Blue
Green
Yellow
Green
Not
provided
Not
provided
121
Connecting a PC
The projector supports Plug &
Play. Your PC will automatically
detect the projector and requires
no driver installation.
HDMI Connection
Using an HDMI cable, connect the
port of the projector to
the HDMI output port of your PC.
Both video and audio are output at
the same time. You can also use
the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Optional Extras
Red
White
Red
Blue
Green
122 CONNECTING DEVICES
HDMI to DVI Connection
Using an HDMI to DVI cable,
connect the projector's
port to the DVI OUT
port.
To output audio, use an audio
cable for connection. You can also
use the
.
Press the INPUT button on the
remote control to select HDMI. You
can connect with any HDMI input
port.
Optional
Extras
AUDIO OUT
Not
provided
DVI OUT
NOTE
• It is recommended to use
an HDMI connection for the
best image quality.
• Depending on the graphics
card, DOS mode video may
not work if a HDMI to DVI
Cable is in use.
• In PC mode, there may be
noise associated with the
resolution, vertical pattern,
contrast, or brightness. If
noise is present, change
the PC output to another
resolution, change the
refresh rate to another rate
or adjust the brightness and
contrast on the PICTURE
menu until the picture is
clear.
• The synchronization input
form for Horizontal and
Vertical frequencies is
separate.
• Depending on the graphics
card, some resolution
settings may not allow the
image to be positioned on
the screen properly.
• If you are using DVI out from
a PC, you have to connect
analog audio separately.
• When using the HDMI/DVI
cable, Single link only is
supported.
CONNECTING DEVICES
Connecting a Laptop
You can connect the projector to a
laptop to use various functions.
HDMI Connection
Using an HDMI cable, connect the
port of the projector
to the HDMI output port of your
laptop. Both video and audio are
output at the same time. You can
also use the
.
Press the INPUT button on the
remote control to select HDMI.
You can connect with any HDMI
input port.
Optional Extras
123
The table below shows examples
of switching the output. For
more information, refer to the
External Output, Connecting to
an External Monitor, or similar
sections of the owner's manual of
your computer.
Brand
Switching
Output
NEC
[Fn]+[F3]
Panasonic
[Fn]+[F3]
Toshiba
[Fn]+[F5]
IBM
[Fn]+[F7]
Sony
[Fn]+[F7]
Fujitsu
[Fn]+[F10]
LG
[Fn]+[F7]
Samsung
[Fn]+[F4]
Macintosh
Adjust the control
panel to enable
mirroring after
start-up.
124 CONNECTING DEVICES
Connecting
Headphones
Connecting a Digital
Amp
You can listen to the audio through
a headphone.
Using an optical cable, connect
the digital audio input port of
a digital amp to the OPTICAL
DIGITAL AUDIO OUT port of the
projector. The output of an amp
with a digital converter must be set
to the desired audio format. When
using a HDMI cable to connect a
home theater or when connecting
an optical output to an external
audio device, set Sound Out
to External Speaker (Optical/
HDMI ARC) as shown below.
If a projector, home theater, or
the speaker of an external audio
device is operating at the same
time, there will be an echo.
Not provided
Optional Extras
CONNECTING DEVICES
NOTE
• Refer to the user manual of
the audio device to connect.
• When connecting this
product to other devices,
make sure to turn off and
unplug all the devices.
• The audio output of this
product has wide-ranging
audio bandwidth, so the
receiver volume must
be adjusted properly.
Speakers can be damaged
by unexpected high
frequencies.
• Connecting the OPTICAL
DIGITAL AUDIO OUT port
of the projector to the digital
audio input port of a digital
amp and the audio input port
of the projector to the analog
audio output port of the
digital amp can cause sound
oscillation due to the closed
loop. Remove one of the two
connections to prevent this.
(This also applies to home
theater devices.)
125
126 CONNECTING DEVICES
Using the Mirroring Function of a Mobile
Phone
MHL Connection
The Mobile High-definition Link (MHL) is an interface that can connect a
mobile phone to the projector and play video and audio from the mobile
phone through the projector.
This only applies to products with a HDMI input that supports MHL.
(To find out whether your device is MHL-certified, please contact your
device manufacturer.)
For MHL support, check the
port.
Use a dedicated cable for MHL.
Optional Extras

NOTE
• When you connect a mobile phone to the
port, you
can see the mobile phone screen through a projector.
--This only applies to mobile phones that support MHL.
--You can use the remote control for some applications.
• Disconnect the MHL cable from the projector when:
--The MHL function is disabled.
--Your mobile device is fully charged in standby mode.
MAINTENANCE
127
MAINTENANCE
Clean your Projector to keep it in optimal condition.
Cleaning
Cleaning the Lens
If there is any dust or staining on the lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to clean the lens.
To remove dust or stains, use an air spray or apply a small amount of
cleaning agent onto a swab or soft cloth to lightly rub the lens.
Please be aware that liquid may flow into the lens if the product is sprayed
directly onto the lens.
Cleaning the Projector Case
To clean the projector case, first unplug the power cord.
To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to
polish the lens.
Do not use alcohol, benzene, thinners, or other chemicals, which may
damage the case.
128 INFORMATION
INFORMATION
To Update Projector Software
Uses Software Update to check and obtain the latest version.
It is also possible to check manually for available updates.
1 Press the (Home) button and select SETTINGS.
2 Select SUPPORT and go to Software Update.
Item
Description
Software Update
Set it to On.
If an update is available, a prompt will appear to
perform the update.
Automatic Update
Mode
If an update is available, the update
automatically starts without prompting.
Check Update
Version
Checks the latest update version installed. When
a new update is available, the download process
can be performed manually.
• When the update starts, the update progress window appears for a short
time and disappears.
• The latest version can be obtained via an Internet connection.
• If software is not updated, certain functions may not work properly.
INFORMATION
129
Before Reporting a Problem, Check the
Following:
If the following symptoms occur, please carry out the checks and
adjustments described below. There may be no malfunction.
General
Problem
Solution
Cannot view certain
programs.
• Adjust the location or orientation of the
antenna.
• Save the programs you wish to view
later using Auto Tuning or Channel
Edit.
There is a delay after the
projector is switched on
before the image is fully
visible.
• This is not a problem. Image noise that
may occur when the projector is first
switched is being cleaned up.
Picture
(Home) → SETTINGS → SUPPORT → Picture Test
First run a Picture Test to verify that the image signal output is normal.
If there is no problem with the test image, check external device
connections and broadcast signals.
Problem
Solution
Images from previous
program or other
programs linger or
the screen displays
annoying lines.
• Adjust the orientation of the antenna
to the TV transmitter, or refer to the
manual for instructions on connecting
the antenna.
Vibrating horizontal/
vertical lines and
fishnet patterns appear
momentarily.
• Such a problem may happen when
there is strong electronic interference.
Turn off other electronic devices such as
mobile phones, power tools, and other
small electrical appliances.
130 INFORMATION
Problem
Solution
The screen display
freezes or does not work
properly during a digital
broadcast.
• This may occur in case of a weak
signal or unstable reception. Adjust
the antenna orientation and cable
connections.
• If the signal strength or quality is low
on Manual Tuning, check with the TV
station or administration office.
Digital broadcasting
is not available even
though the cable is
connected.
• Check with the cable operator providing
your subscription and/or signal.
(Depending upon your subscription,
digital broadcasting may not be
supported.)
The display is inactive
or unclear when
connected to an HDMI®
source.
• Check the HDMI® cable specifications.
If your HDMI® cable is not genuine,
images may fade in and out or not be
displayed properly.
• Ensure that all cables are securely
connected. When connections are not
secure, images may not be properly
displayed.
Does not work with a
USB storage device.
• Verify that the USB device and cable is
version 2.0 or higher.
Sound
(Home) → SETTINGS → SUPPORT → Sound Test
First run a Sound Test to verify that the sound signal output is normal.
If there is no problem with the test sound, check connected external
devices and the broadcast signal.
Problem
Solution
Screen display is on but
there is no sound.
• Check other TV programs.
• Check if the audio output settings for the
projector are configured correctly.
INFORMATION
Problem
131
Solution
For an analogue
broadcast, stereo is not
clear or sound comes
from one speaker only.
• In a poor reception area (areas with
weak or unstable signals) or if multi
audio is not stable, select Mono on
Multi Audio.
• Adjust the balance using the navigation
button.
TV sound is not in
sync with the image or
the sound breaks up
occasionally.
• If the issue affects a specific TV program
only, it may be caused by problems with
the broadcast signal for the individual
station. Check with the TV station or
your cable operator.
The volume changes
when I change program.
• Volume can vary from program to
program.
• Set Auto Volume to On.
On certain programs,
there is no sound at all,
or only the background
music can be heard
(in case of a programs
created for overseas
viewers).
• In Language, set Language → Audio
Language to the language of your
choice. Even if you change the language
on Multi Audio, you can go back to
the default setup once you turn off the
power or change the program.
There is no sound when
connected to HDMI /
USB.
• Verify that the HDMI® cable is high
speed.
• Check if the USB device and cable is
version 2.0 or higher.
• Use only regular music (*mp3) files.
132 INFORMATION
PC Connection Problem
Problem
Solution
The screen display
does not come on
after connecting to
the computer.
• Verify that the computer and the projector
are securely connected.
• Turn the projector off and back on using the
remote control.
• Restart the PC with the projector on.
• Check whether the resolution is correctly
set for PC input.
• Reconnect the HDMI cable.
There is no sound
after connecting the
computer with the
HDMI cable.
• Check with manufacturer of your video
card to ensure it supports HDMI voice
output. (Video cards in DVI format require
connection of a separate sound cable.)
When connected to
the computer, the
display is partially
cut off or shifts to
one side.
• Set the resolution to support PC input. (If
this does not work, reboot the computer.)
INFORMATION
133
Problems Replaying Movies in My Media
Problem
Solution
I cannot view the files
on the Movie List.
• Check whether the file on the USB storage
device can be read on a computer.
• Check whether the file extension is
supported.
This file is invalid.
message appears
or the image display
is not normal even
though the sound
is OK.
• Make sure that the file replays normally on
the computer’s video player. (Check for
damaged files.)
• Check whether the resolution is supported
by the computer.
• Verify that the video/audio codec is
supported.
• Verify that the frame rate is supported.
Audio not supported.
message appears
or the sound is not
normal even though
the image display is
OK.
• Make sure that the file replays normally on
the computer’s video player. (Check for
damaged files.)
• Check if the audio codec is supported by
the computer.
• Verify that the bit rate is supported.
• Verify that the sample rate is supported.
Subtitles are not
displayed.
• Make sure that the file replays normally on
the computer’s video player. (Check for
damaged files.)
• Check if the video file has the same name
as the subtitle file.
• Make sure that the video and subtitle files
are in the same folder.
• Verify that the subtitle file format is
supported.
• Verify that the subtitle language is
supported. (Subtitle files can be opened in
Notepad to check the language.)
• Image shown may differ from your projector.
• For information on requesting service, refer to the following menu.
(Home) → SETTINGS → SUPPORT → Product/Service Info.
134 SPECIFICATIONS
SPECIFICATIONS
MODELS
PF1500 (PF1500-NA)
Resolution (Pixel)
1920 (Horizontal) × 1080 (Vertical)
Aspect Ratio
16:9 (Horizontal:Vertical)
Panel size (mm)
11.896
Projection
Distance (Video size)
Wide : 0.91 m to 3.70 m (76.2 cm to 304.8 cm)
Tele : 0.91 m to 3.70 m (69.3 cm to 277.1 cm)
Ratio of Upward
Projection
100 %
Working range of
the remote control
6m
Power
AC 100 - 240 V, 50 Hz/ 60 Hz
Power
consumption
100 W
AC-DC Adaptor
19 V
, 5.79 A
(Adaptor Input 100 - 240 V @ 50/60 Hz)
Audio Output
3W+3W
Reception type
NTSC-M, ATSC
Reception
channels
VHF 02 to 13, UHF 14 to 69, CATV 01 to 135,
DTV 02 to 69, CADTV 01 to 135
External Antenna
Impedance
75 Ω
Height (mm)
84 mm (without foot) / 87 mm (with foot)
Width (mm)
132
Depth (mm)
213 mm (without lens) / 220 mm (with lens)
Weight (g)
1500
USB Device
5 V, 0.5 A (Max.)
SPECIFICATIONS
135
Temperature
Operation
environment
Operation
0 °C to 40 °C
Storage
-20 °C to 60 °C
Relative humidity
Operation
0 % to 80 %
Storage
0 % to 85 %
* Contents in this manual may be changed without prior notice due to
upgrade of product functions.
HDMI (DTV) Supported Mode
Resolution
720 x 480p
1280 x 720p
1920 x 1080i
1920 x 1080p
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
31.469
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.97
27.000
24.000
33.716
29.976
33.75
30.00
67.43
59.94
67.500
60.00
136 SPECIFICATIONS
Supported HDMI (PC) Modes
Resolution
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.31
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
67.5
60.00
• If an invalid signal is input into the projector, it will not be displayed
properly on the screen or a message such as No Signal or Invalid
Format will be displayed.
• The projector supports the DDC1/2B type as the Plug & Play function
(Auto-recognition of PC monitor).
• 1920 x 1080 is recommended as the best picture quality in the PC
mode.
SPECIFICATIONS
137
Component Supported Mode
Resolution
720 x 480i
720 x 480p
1280 x 720p
1920 x 1080i
1920 x 1080p
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
15.73
59.94
15.75
60.00
31.47
59.94
31.50
60.00
44.96
59.94
45.00
60.00
33.72
59.94
33.75
60.00
26.97
23.976
27.00
24.00
33.71
29.97
33.75
30.00
67.432
59.94
67.500
60.00
Component Port Connecting Information
Component ports on the
Projector
Video output ports on DVD
player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
138 SPECIFICATIONS
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL and other open source
licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost
of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date
on which you purchased the product.
The model and serial numbers of the projector are
located on the back or on the side of the projector.
Record them below should you ever need service.
MODEL
SERIAL