MX-J630
MX-J730
MiNi Hi-Fi Component Audio
System
MP3-CD/WMA-CD/CD-R/RW Playback
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USERSERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND INSERT FULLY.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
• This product contains chemicals
known to the State of California
to cause cancer and reproductive
toxicity.
• TO PREVENT THE SPREAD OF
FIRE, KEEP CANDLES AND OTHER ITEMS WITH
OPEN FLAMES AWAY FROM THIS PRODUCT
AT ALL TIMES.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the product.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN THE COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and
televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
•
Reorienting or relocating the receivingantenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consulting the dealer or an experienced radio/TV technician for help.
CAUTION : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user’s
authority to operate it.
2
English
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions listed
below. Keep these operating instructions handy for
future reference.
1)Read these instructions.
2)Keep these Instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8)Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9)Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11)Only use attachment/accessories
specified by the manufacturer.
12)Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms
or when unused for long periods of time.
14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Precautions
• Ensure that the AC power in your house matches
the requirements listed on the identification
sticker located on the back of your product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure
the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert
Slot is empty.
• To turn off the product completely, disconnect the
AC plug from the wall outlet. Disconnect the AC
plug from the wall outlet if you will be leaving the
device unused for a long period of time.
• During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to
lightning could damage the product.
• Do not expose the product to direct sunlight or
other heat sources. This could cause the product
to overheat and malfunction.
• Protect the product from moisture and excess
heat and equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC wall
outlet if the product malfunctions.
• This product is for personal use only. It is not
intended for industrial use.
• Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment. Do
not dispose of batteries in the general household
trash.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good
stereo sound.
• Direct the loudspeakers towards the listening
area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with liquids,
such as vases, on the apparatus.
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and
receptacle.
-- An improper ground may cause electric shock
or equipment damage. (Class l Equipment
only.)
English
2
3
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on a disc may reduce
sound and picture quality or cause skipping.
-- Avoid touching the surface of
a disc where data has been
recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt on a disc, clean it
with a mild detergent diluted in water and wipe
with a soft cloth.
-- When cleaning, wipe gently from
the inside to the outside of the
disc.
• Disc Storage
-- Do not keep in direct sunlight.
-- Keep in a cool, ventilated area.
-- Keep in a clean, protective jacket and store
vertically.
• Condensation may form if warm air comes into
contact with cold parts inside the product. When
condensation forms inside the product, it may
not operate correctly. If this occurs, remove the
disc and let the product stand for 1 or 2 hours
with the power on.
Disc and Format Compatibility
MP3-CD Discs
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (for example, /, =, +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only consecutively written multisession discs
can be played. If there is a blank segment in a
Multisession disc, the disc can be played only up
to the blank segment.
• If a disc is not closed, it will take longer to begin
playback and not all of the recorded files may
play.
• If a file is encoded in the Variable Bit Rate (VBR)
format,( i.e. files encoded in both low bit rate and
high bit rate - 32Kbps ~ 320Kbps), the sound
may skip during playback.
• A maximum of 999 files can be played per CD.
Supported Audio Formats
File
Extension
*.mp3
This product does not support Secure (DRM)
Media files.
CD-R Discs
• Some CD-R discs may not be playable
depending on the disc recording device (CDRecorder or PC) used to burn music onto the
disc and the condition of the disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80 minutes
as they may not be played back.
• Some CD-RW (Rewritable) media may not be
playable.
• Only CD-Rs that are properly "closed" can be
fully played. If the session is closed, but the disc
is left open, the product may not be able to fully
play the disc.
4
English
*.wma
Audio
Codec
Sampling
Rate
Bit Rate
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5
Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
➣➣Does not support the WMA Professional codec.
➣➣The table above shows supported formats, sampling rates, and bit rates. Files recorded in formats that are not supported may not be played
properly.
Contents
Thank you for buying this SAMSUNG MiNi Hi-Fi Component Audio system.
Please take time to read these instructions.
They will allow you how to operate your system and take full advantage of its features.
Safety Warnings........................................ 2
Searching for a Track Quickly........... 11
Important Safety Instructions.................. 3
CD/USB My List Function...................... 11
Precautions............................................... 3
Checking or Editing the track of the
Disc Storage & Management................... 4
CD/USB My List...................................... 11
Disc and Format Compatibility................ 4
Using Bluetooth...................................... 12
Supported Audio Formats........................ 4
Contents.................................................... 5
Using the Samsung Audio Remote
App........................................................... 13
Accessories............................................... 5
TV SoundConnect................................... 14
Description................................................ 6
Setting the Clock.................................... 15
Front Panel........................................... 6
Timer Function........................................ 15
Rear Panel............................................ 7
Cancelling the Timer............................... 16
Remote Control................................... 8
Listening to Radio................................... 16
Display Function....................................... 8
Recording Function................................ 17
CD/MP3/WMA-CD Playback................... 9
Recording Speed.................................... 18
Selecting a Track....................................... 9
Selecting PRESET EQ Mode................. 18
Searching for a Specific Music
Selecting USER EQ Mode..................... 18
Passage on a CD...................................... 9
Selecting MY KARAOKE Mode............. 18
Repeat One or All Tracks on a
Using the FOOTBALL MODE................. 18
Compact Disc........................................... 9
Using the GIGA SOUND Function......... 18
Playing a USB Device............................. 10
Using the NON-STOP RELAY
Function................................................... 19
To Select a Track from
a USB Device..................................... 10
Auto Change Function............................ 19
To Search a Folder Quickly............... 10
Software update...................................... 19
To Use High Speed Search............... 10
Troubleshooting...................................... 20
To Repeat one or all Tracks.............. 10
Specifications.......................................... 21
To Delete a File.................................. 10
Accessories
Check for the supplied accessories below.
FM/AM Antenna
(AH42-00036A)
Symbols
User's Manual
(AH68-02791G)
Important
Remote Control/Batteries
(AH59-02694B/4301-000116)
Note
English
4
5
Description
Front Panel
1
21
2
3
4
20
5
19
18
6
17
7
16
8
15
9
10
11
14
13
12
1. Window Display
2. FOOTBALL MODE button
3. GIGA SOUND BLAST button
4. CD/ Bluetooth button
5. STOP/Tuning Mode button
6. Search/Skip button
7. TV SOUND CONNECT button
8. USB 1, 2 button
9. PRESET EQ button
10. USB REC button
11. USB 1 jack for Playback only
12. Disc Tray
13. USB 2 REC jack for Playing and USB Recording
14. USER EQ button
15. OPEN/CLOSE button
6
English
16.
17.
18.
19.
20.
21.
AUTO CHANGE button
Search/Skip button
VOLUME/JOG Control
PLAY/PAUSE button
TUNER/AUX button
POWER button
• Press this button to switch your MiNi Hi-Fi
Component Audio system on and off.
Rear Panel
1
2
3
4
1. 2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on
the rear of the system.
1. To achieve the correct sound quality, insert the
speaker connector cables identified below into
the correct speaker terminals on the back of the
system.
• Left speaker (marked L).
• Right speaker (marked R).
• Press the TUNER/AUX button on the main
unit or press the AUX button on the remote
control to select the AUX input.
• When the unit is in AUX mode, if none of the
buttons are pushed for more than 8 hours, the
power will automatically turn off.
4. FM/AM Antenna Connector Terminal
Plug the connector on the FM/AM antenna (supplied)
into the FM/AM terminal on the rear of the system.
2. ONLY FOR SERVICE
• This jackis for service only. Please do not use.
3. AUX IN Terminals
1. Use an Audio Cable (not supplied) to connect AUX
IN on the product to Audio Out on an external analog
component.
• Be sure to match connector colors.
• If the external analog component has only one
Audio Out jack, connect to either the left or
right terminal.
English
6
7
Remote Control
42
1
2
3
4
5
6
7
41
40
39
38
37
36
35
34
33
32
31
8
9
10
11
12
30
29
28
27
26
13
14
15
16
17
18
19
20
21
25
24
23
22
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
POWER
Bluetooth
CD
USB
TUNER
TUNING MODE
AUX
PRESET EQ
TUNING/SKIP
STOP
PLAY/PAUSE
FOOTBALL
VOLUME ENTER
FOLDER -/EFFECT DOWN .
MY LIST
TIMER ON/OFF
19. TIMER SET
20. BEAT WAVING
• This function is
not available on
this product.
21. MY KARAOKE
22. MIC VOLUME -, +
• This function is
not available on
this product.
23. DELETE
24. SLEEP
• Set a sleep time
to shut off the
product.
25. SEARCH
26. FOLDER +/EFFECT +
27. UP ,
28. VOLUME +
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
GIGA
AUTO CHANGE
REPEAT
Fast-Backward/
Forward
USER EQ
MEMORY
DISPLAY
NON-STOP RELAY
MO/ST
REC SPEED
USB REC
TV SoundConnect
CD OPEN/CLOSE
MUTE
• Turn off the sound
temporarily.
Installing batteries in the Remote Control
• Place batteries in the remote control so that the
polarities (+,- ) match the the diagram in the
battery compartment.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat
the batteries.
• There is the danger of an explosion if you
replace the batteries with the wrong battery
type. Replace the batteries only with the same
* Battery size: AAA
or equivalent type.
• The remote control can be used up to
approximately 23 feet (7 meters) in a straight
line from the unit.
Display Function
Lets you view all functions available on the display
and adjust the brightness of the display.
Each time you press the DISPLAY button on the
remote control, the display mode will change as follows:
●●
●●
●●
●●
The Demo function
The "xxxW MINI COMPONENT AUDIO" is
displayed. The "xxx" will be different depending on
your Model.
The Dimmer function
The Dimmer function is selected and the display
darkens.
Display ON
The Display turns on.
Clock ON
The Clock is displayed.
8
English
The DEMO Music Function
Press the DISPLAY button for 10 seconds to start the Demo
mode.
When you press the DISPLAY button while displaying the
demo, the function operates as follows:
DIMMER ON ; DIMMER OFF ; --:-- [time display]
;normal display
To cancel the Demo music mode
• Press the DISPLAY again for 10 seconds. The DEMO
mode is canceled and the product turns off.
• Press the TUNER/AUX, CD/Bluetooth, or USB button.
The DEMO mode is canceled and the mode is changed
to the mode you selected.
• When the Demo mode is on, only the
POWER ( ) button, MUTE and VOLUME buttons,
and the buttons mentioned above work.
• The DEMO sampler plays for about 3 minutes.
When DEMO sampler play is complete, the DEMO
message will remain in the display on the front panel
until you cancel DEMO mode.
CD/MP3/WMA-CD Playback
Lets you play 12 mm compact discs without an adapter.
This product is designed to play audio CDs, CDs, CD-Rs, CD-RWs, or MP3/WMA-CDs.
Selecting a Track
You can select a desired track while a disc is
being played.
To play the previous track
• Gently open or close the CD tray. Do not apply excessive force.
• Do not apply force toor place a heavy object on the
product.
• Do not insert an out-of-spec, shaped CD such as a heart
or octangle shaped CD. You can damage the product.
• For the best sound, maintain your compact discscarefully
and correctly.
Press the [ button within 3 seconds after the current
track starts playing.
Press the [ button twice, 3 seconds or more after
the current track starts playing.
1. Press
the OPEN/CLOSE button to open the disc
tray.
2. Place a disc gently into the tray with the disc's label
facing up.
3. Press the OPEN/CLOSE button to close the disc
tray. The disc will be played automatically.
Press the [ button once, 3 seconds after the current
track starts playing.
• For MP3/WMA-CD audio, it may take several minutes to
finish scanning the disc tracks.
• If you play a file with an English name or a MP3/WMACD medium with an English title, the song title will be
shown in the display. (Other languages besides English
may not be displayed.)
• An English-titled track containing a special character will
not display.
<CD/MP3/WMA-CD Playback Display>
Track Indicator
1 0:19
To play the next track
Press the ] button.
To play the current track from the beginning
To play the track of your choice
Press the [ or ] button to move to a desired track.
• You can select a track directly without the [ or ]
button. (refer to the page 11)
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a specific music passage on a track.
1. Press the (, ) buttons for Search Function.
Press ...
Playtime Indicator
4. Adjust the volume by:
• Tuning the VOLUME knob on the unit or pressing the Vol
+ or – button of the remote control.
• The volume level can be adjusted in 31 steps (VOLUME
MIN, VOLUME 01 - VOLUME 29, and VOLUME MAX).
5. To pause playback temporarily, press the
PLAY/PAUSE (p) button. Press PLAY/PAUSE
(p) again to continue playing the disc.
MP3/WMA
(4
)1➞)2➞)3➞)4
)4
• You can also press and hold the [ or ] button on
the main unit to automatically scan for a track.
• The product does not play audio when in the ( ,) 3
or ( ,) 4 fast search mode.
Repeat One or All Tracks on a
Compact Disc
6. To end playing, press the STOP (@) button.
• If there is no CD inserted in the DISC tray, the unit
displays “NO DISC”.
• The quality of MP3/WMA-CD playback may vary
depending on the condition of the disc containing the
music files or the condition of the recorder with which
the disc was created.
• If different types of files or unnecessary folders are on
the same disc, you will have problems with playback.
• Keep the tray closed whenever you are not using it to
prevent dust from entering.
• You can load or unload a compact disc when the radio,
USB or auxiliary source function is selected. Also, when
you press the OPEN/CLOSE button, the product will
automatically change to the MP3/CD mode.
• If no buttons are pressed on the product or remote
control for more than 3 minutes when the product is in
Pause mode, the product will change to Stop mode.
• If no buttons are pressed on the product or remote
control for more than 25 minutes when the product
is in Stop mode or no Disc mode, the power will
automatically turn off.
CDDA
(1➞(2➞(3➞(4
You can play a CD, a group of tracks in a folder, or
a single track repeatedly:
1. Press the REPEAT button.
Each time you press the REPEAT button, the repeat
mode will change as follows:
MP3/WMA: OFF➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
CD: OFF➝ TRACK ➝ ALL ➝ RANDOM
2. When
you want to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected
folder.
• ALL: Repeatedly plays the entire disc.
• RANDOM: Plays tracks in random order.
English
8
9
Playing a USB Device
Connect an external storage device such as a USB
flash memory stick or external HDD (Hard Disk
Drive) to the product. You can play files in MP3/
WMA format.
Before you begin! • Connect the external USB storage device to your product.
• Select the USB mode by pressing the
button on
the main unit or select USB by pressing the USB button
on the remote control.
• The first track of the first directory plays automatically.
➣➣To stop playing
1. Play a file you want to delete.
2. Press the DELETE button on the remote
control. "DEL N" is displayed.
3. Press the DELETE button on the remote control
or press the [ or ] button until “DEL Y” is
displayed.
4. When “DEL Y” is displayed, press the ENTER
button on the remote control. “DELETE END”
appears and the deletion is completed.
Press the STOP ( @ ) button to stop playing.
☛☛The NTFS file system are not supported.
If you press the STOP ( @ ) button once again,
you can remove the USB device safely.
Do not connect a USB recharger to the USB port
of this product. You can damage the product.
Read through the instructions below before using
a USB device with this unit.
➣➣To remove the USB device
☛☛
To Select a Track from a USB Device
You can select an MP3 file during play.
1. If you want to move to the previous/next track,
press the [,] buttons briefly.
• The unit moves to the previous/next file within the
directory.
• If you press the [,] buttons more times than the
number of the files in the directory, the unit moves to
the next directory.
To Search a Folder Quickly
1. Press the
or
button on the remote
control to move to the previous/next folder.
2. When the search is done, you will see the
previous/next folder name. The first track in the
folder will start playing.
To Use High Speed Search
You can search through the section quickly during play.
1. Press the (,) button.
• Each time you press the button, you will move
backward/forward fast.
The sound will not output in fast playback mode.
☛☛
To Repeat one or all Rracks
1. Press the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as follows:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected
folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
10
To Delete a File
You can delete a file on your USB device.
English
• Some USB devices may not work properly with this
product.
• The maximum current supported by the USB port for an
external device is 500 mA (at 5V DC).
• This product only supports USB devices that are
formatted in the FAT16 and FAT32 file system.
• USB HDD's should be connected to a separate power
source. Otherwise, the HDD's will not work.
• If a USB external storage device is connected to multiple
devices, only the files in the first HDD will be played.
• If a usb external device that has multi partition, only the
first partition which support file system is recognized.
• DRM-applied files are not supported. Digital Right
Management restricts unauthorized access to a DRM file
so that the copyright of the file is protected from piracy.
• Even if the extension of the file is .mp3, the file cannot be
played if it is formatted in MPEG layer 1 or 2.
• Do not use a USB hub. USB hubs are not supported.
• The unit displays only the first 15 characters of an MP3/
WMA file name.
• This device is designed to support removable HDDs with
less than 160GB. Depending on the device, a removable
HDD with 160GB or more may or may not be supported.
• It can take several minutes for the product to recognize
the files on a USB device.
• USB devices (particularly, USB HDDs) may cause a
pause when moving to the next track.
• Some USB devices, digital cameras, USB card readers,
iPods, iPhones, and Smart Phones may not be
supported.
• With USB devices supporting only USB VER. 1.1, the
unit may access files slowly or may not recognize file
properties.
• If no buttons are pressed on the product or remote
control for more than 3 minutes when the product is in
Pause mode, it will be changed to Stop mode.
• If no buttons are pressed on the product or remote
control for more than 25 minutes when the product is in
Stop mode or no USB mode, the power will automatically
turn off.
• A maximum of 999 files can be played per USB device.
Searching for a Track Quickly
For CDDA/MP3-CD/USB, you can select a track
directly without the [ or ] button.
6. Press and hold the MY LIST button on the
remote control to select OFF-MY LIST to exit
the My List mode.
• Each time you press and hold the MY LIST button
on the remote control, the mode will switch as
follows: ON-MY LIST ; OFF-MY LIST.
ON-MY LIST: Enter the My List mode.
OFF-MY LIST: Exit the My List mode.
• If you open the disc tray or turn off the product,
your My List will be canceled.
• If you remove usb device, the current USB
function My List mode will be canceled.
1. Press the SEARCH button.
After pressing the SEARCH button, press the ,
or . button on the remote control or turn the
VOLUME/JOG control on the product to the left
or right to select a desired track.
• You can move to the selected track directly.
<Search Display>
Selected Track
Indicator
0 12 0 25
Total track
Indicator
2. When the search is completed, the track will
automatically start playing.
CD/USB My List Function
• You can use the My List function to set up the
playback order of up to 99 tracks of your choice.
• This function is available during playback of a CDDA
or MP3/WMA file in a CD-ROM/USB device.
1. P
ress the MY LIST button to display the
message below:
L0 1 --
• In CD/USB ON-MY LIST mode, if you press the
USB REC, SEARCH, DELETE or
or
button , these functions will not work, and the unit
will display "MY LIST PLAY".
• If you switch to another mode, CD/USB My List
mode is maintained.
• When the recording or copy is completed, the
My List of the USB 2 will be canceled.
Checking or Editing the track of the
My List
You can check a list of MY List tracks and edit
them as you want.
1. If a My List track is being played, press the MY
LIST button.
2. Press the ENTER (
) button to display the
message below:
C0 1 02 or 0 1 002
(01= My List number, --= track number)
2. Use the VOLUME/JOG control on the main unit
or use the [, ] or , , . buttons to move
to a desired track.
• Turn the VOLUME/JOG Control left or right
on the main unit to move to the previous/
next track.
• Press [ or . to move to the previous
track.
• Press ] or , to move to the next track.
3. Press the ENTER (
) button to confirm your
selection. The selection is stored and displayed
the message below:
L0 2 -4. To select additional tracks, follow Steps 2 to 3 above.
5. Press the PLAY/PAUSE (p) button or press the
MY LIST button on the remote control to play the
My list tracks.
• In stop mode, when the My List setting is done,
press PLAY/PAUSE (p) button to play the tracks
of My List.
3.
4.
5.
6.
(01= my list number, 02 or 002= track number)
Press the ENTER (
) button or press the
Effect- or Effect+ button repeatedly until the
desired track is displayed.
Press the VOLUME/JOG control on the main
unit or press the [ or ] button to select a
different track.
Press the ENTER (
) button to confirm your
selection.
To play the My List tracks, press the MY LIST
button on the remote control or press the PLAY/
PAUSE (p) button.
• When using the Checking or Editing the Track functions of
the My List mode, you can use the DELETE button to
remove a track from the My List track list.
1. Press the DELETE button on the remote control.
"DEL N" is displayed.
2. Press the DELETE button on the remote control or
press the [ or ] button until “DEL Y” is
displayed.
3. When “DEL Y” is displayed, press the ENTER button
on the remote control. “REMOVE” appears and the
removal is complete.
English
10
11
Using Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth technology lets Bluetooth-compliant devices
interconnect easily with each other using a short,
wireless connection.
• A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body comes into contact with the
receiving/transmitting system of the Bluetooth device
or the product.
- It is subject to electrical variation from obstructions
caused by a wall, corner, or by office partitioning.
- It is exposed to electrical interference from
same frequency-band devices including medical
equipment, microwave ovens, and wireless LANs.
• Keep the MiNi Hi-Fi Component Audio system and
the Bluetooth device close together when pairing. The
greater the distance between the system and Bluetooth
device, the worse the quality.
• If the distance exceeds the Bluetooth operational range,
the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
• The MiNi Hi-Fi Component Audio system has an
effective reception range of up to 16.25 feet (5
meters) in all directions if there are no obstacles. The
connection will be automatically cut off if the Bluetooth
device moves out of this range. Even within range, the
sound quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric interference
during its operation.
To connect the MiNi Hi-Fi Component to
a Bluetooth device
Before you begin, confirm that your Bluetooth device
supports the Bluetooth-compliant stereo headset
function.
1. Press the CD/Bluetooth button on the main
unit or the Bluetooth button on the remote
control to display the "BT" message.
• You will see WAIT for a short period of time
and then BT READY on the front display of
the MiNi Hi-Fi Component.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user's manual.)
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
12
English
4. Select "[Samsung] MINI xxxxxx J-Series "
from the searched list.
• When the product is connected to the
Bluetooth device, it will display Device name
; BT on the front display.
• If the Bluetooth device has failed to pair
with the product or "UNPAIRED" appears
on the display, please delete the previous
"[Samsung] MINI XXXXXX J-Series" found
by the Bluetooth device and have it search
for the MINI again.
5. You can listen to the music playing on the
connected Bluetooth device over the MiNi Hi-Fi
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
• The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports
the A2DP (AV) function.
• Only one Bluetooth device can be paired at a
time.
• You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
• You may be required to enter a PIN code
(password) when connecting the Bluetooth
device to the MiNi Hi-Fi Component. If the PIN
code input window appears, enter <0000>.
• Once you have turned off the MiNi Hi-Fi
Component and pairing is terminated, pairing will
not be restored automatically. To reconnect, you
must pair the device again.
• The MiNi Hi-Fi Component audio system may not
search or connect properly in the following cases:
-- If there is a strong electrical field around the
MiNi Hi-Fi Component.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
• Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause electric
interference.
To disconnect the Bluetooth device from
the MiNi Hi-Fi Component
You can disconnect the Bluetooth device from
the Mini Hi-Fi Component. For instructions,
see the Bluetooth device's user manual.
• The MiNi Hi-Fi Component will be disconnected.
• When the MiNi Hi-Fi Component is disconnected
from the Bluetooth device, the MiNi Hi-Fi
Component will display BT DISCONNECTED ;
BT READY on the its display.
To disconnect the MiNi Hi-Fi Component
from the Bluetooth device
Press another mode button on the front panel
of the Mini Hi-Fi Component to switch from
Bluetooth mode to another mode or turn
off the Mini Hi-Fi Component. The currently
connected device is disconnected.
• The connected Bluetooth device will wait a certain
amount of time for a response from the MiNi HiFi Component before terminating the connection.
(Disconnection time may differ, depending on the
Bluetooth device)
• In Bluetooth connection mode, the Bluetooth
connection may be lost if the distance between the
MiNi Hi-Fi Component and the Bluetooth device
exceeds the effective reception range.
• If the Bluetooth device comes back into the effective
range after disconnecting, you can restart the MiNi
Hi-Fi Component to restore the pairing with the
Bluetooth device.
• The MiNi Hi-Fi Component automatically turns off
after 25 minutes in the BT Ready mode.
• When a Bluetooth device is connected to the MiNi
Hi-Fi Component audio system, the Component
system automatically switches to the Bluetooth mode
if it is in a different mode (except when it is displaying
"REQUEST" in the TV SoundConnect mode if the
Bluetooth device haven't been paired with the HiFi
Component before.).
2. When the product is off, connect your smart
device to the product via Bluetooth. (For
information on Bluetooth connections, refer to
your smart device’s manual.)
• The Bluetooth device must have been paired
with the MiNi Hi-Fi Component before.
3. When the connection is complete, the product
turns itself on automatically in Bluetooth mode.
• Select the desired music to play from your
smart device.
• Press and hold the Bluetooth button on the
remote control or the CD/Bluetooth button
on the main unit to turn the Bluetooth Power
On function on or off. Each time you press and
hold this button, the MiNi Hi-Fi Component
displays ON-BLUETOOTH POWER ; OFFBLUETOOTH POWER on its display.
Using the Samsung Audio Remote
App
Installing the Samsung Audio Remote
App
To control the product with your Smart Device and the
Samsung Audio Remote app, download the Samsung
Audio Remote App by accessing the app through
Google Play store.
Accessing the Samsung Audio Remote
App
After you install the Samsung Audio Remote app,
follow the instructions in the app.
Using Bluetooth Power On
When the product is turned off, you can
connect your smart device to the product via
a Bluetooth connection to turn it on.
1. Press and hold the Bluetooth button on the
remote control or press and hold the CD/
Bluetooth button on the product to set the
Bluetooth Power On function on. ONBLUETOOTH POWER appears on the display.
• The APP function only supports Android mobile
phone devices running Android OS 3.0 or later.
English
12
13
TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the MiNi Hi-Fi Component by using the
TV SoundConnect function.
Connecting the MiNi Hi-Fi Component to
a SoundConnect Compatible Samsung
TV
Before activating this function, be sure to activate
the Samsung TV's SoundConnect or SoundShare
mode.
1. Press the TV SOUND CONNECT button on the
main unit or the TV SoundConnect button on
the remote control to display the TV
SOUNDCONNECT message.
WAIT ; SEARCH ; REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
3. When the MiNi Hi-Fi Component is connected
to the TV, it will display [TV] Name ; TV on the
front display.
4. The audio from the connected TV plays over the
MiNi Hi-Fi Component audio system.
• In TV SoundConnect mode, the Play/
Repeat/Stop/Next/Back functions are not
available.
• The SoundConnect feature is available on
some Samsung TVs released since 2012.
Check whether your TV supports the
SoundShare or SoundConnect function.
(For further details, refer to the TV's user's
manual.)
• If you unplug the MiNi Hi-Fi Component, the
TV SoundConnect connection is terminated.
To re-establish the connection, plug the MiNi
Hi-Fi Component into an outlet, and then set
the TV SoundConnect connection again.
• Only one MiNi Hi-Fi Component at a
time can be connected to a TV via TV
SoundConnect.
• To connect to another TV in TV
Soundconnect mode, press the p button
for more than 5 seconds, and then connect
to the other TV by following the directions
above.
14
English
To disconnect the TV from the MiNi Hi-Fi
Component
You can disconnect the TV from the MiNi Hi-Fi
Component.
For instructions, see the TV's user manual.
• When the MiNi Hi-Fi Component is disconnected
from the TV, the Mini Hi-Fi Component will display
TV DISCONNECTED ; REQUEST on its
display.
To disconnect the MiNi Hi-Fi Component from
the TV
Press another mode button on the front panel
of the MiNi Hi-Fi Component to switch from TV
SoundConnect mode to another mode or turn off
the MiNi Hi-Fi Component. The currently connected
device is disconnected.
• The connected TV will wait a certain amount
of time for a response from the MiNi Hi-Fi
Component before terminating the connection.
(Disconnection time may differ, depending on the
TV)
• The connection may be lost or sound may stutter
if the distance between the TV and the MiNi Hi-Fi
Component exceeds 6.5 feet (2 m).
• Instability in the network environment may cause
the connection to be lost or sound to stutter.
• In TV SoundConnect mode, the MiNi Hi-Fi
Component automatically turns off after 25
minutes if it is not connected to a TV.
Setting the Clock
During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
1. Switch the system on by pressing the POWER
( ) button.
2. Press the TIMER SET button and then press
the ENTER (
) button, "CLOCK" is displayed.
3. Press the ENTER (
) button. The hour
flashes.
• To increase the hours, press: ,
• To decrease the hours, press: .
4. When the correct hour is displayed, press the
ENTER (
) button. The minutes flash.
• To increase the minutes, press: ,
• To decrease the minutes, press: .
5. When the correct minute is displayed, press the
ENTER (
) button. " TIME" appears in the
display.
• The current time is now set.
• You can display the time, even when you are
using another function, by pressing the
TIMER SET button once.
• You can also use the ], [ or the
VOLUME/JOG control on the front panel
instead of the , or . button in Steps 3 and
4.
Timer Function
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
• If you no longer want the system to be switched on
or off automatically, cancel the timer by pressing the
TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1. Switch the system on by pressing the
POWER ( )button.
2. Press the TIMER SET button until
displayed.
TIME is
3. P
ress the ENTER (
) button.
Result: ON is displayed for a few seconds. You
can set the timer switch-on time.
4. Set the timer switch-on time.
a. Press the , or . button to set the hours.
b. Press the ENTER (
) button.
c. Press the , or . button to set the minutes.
d. Press the ENTER (
) button.
Result: O
FF is displayed for a few seconds.
You can now set the timer switch-off
time.
5. Set the timer switch-off time.
a. Press the , or . button to set the hours.
b. Press the ENTER (
) button.
Result: The minutes flash.
c. Press the , or . button to set the minutes.
d. Press the ENTER (
) button.
Result: V
OL XX is displayed, where XX corresponds to the volume already set.
6. P
ress the , or . button to adjust the volume
level, and then press the ENTER (
)button.
Result: The source to be selected is displayed.
7. P
ress the , or . button to select the desired
source to be played when the system switches
on.
If you select...
You must also...
FM/AM (radio)
P
a
ress the ENTER (
) button.
b Select a preset station by pressing
the , or . button.
CD/MP3 (compact disc) Load one compact disc.
USB
Connect the USB device.
8. Press the ENTER (
) button.
Result: CHKREC (Do you want to record?) is displayed.
9. Press the ENTER (
) button.
Result: REC N is displayed. You can press the
, or . button to select REC Y or REC N, and
then press ENTER (
) button.
1).If you select REC N, the MiNi Hi-Fi
Component will not record when it turns on. If
you have already set a tuner timer recording,
selecting REC N cancels it. Note that the MiNi
Hi-Fi Component will still turn on and off at
the times you set earlier in this procedure.
2).If you select the REC Y, you can set the MiNi
Hi-Fi Component to record when it turns on.
The recording switch on and switch off times
can be different from the timer switch on and
off times you set earlier in this procedure.
a. Press the ENTER (
) button.
Result: ON is displayed for a few seconds.
You can set the tuner timer recording
switch-on time.
Result: The minutes flash.
English
14
15
b. Press the ENTER (
) button.
Result: OFF is displayed for a few
seconds. You can set the tuner timer
recording switch-off time.
• The maximum tuner timer recording time is 5
hours.
• If the timer switch on and off times are identical,
the word ERROR is displayed.
• When there is no disc in or USB connected
to the MiNi Hi-Fi Component, if you select
"MP3/CD" or "USB 1 or USB 2", the MiNi Hi-FI
Component automatically selects "TUNER".
• You may use the ], [ buttons or the
VOLUME/JOG control on the main unit instead
of the , or . button to adjust settings in
Steps 4 through 9.
• If the switch-on or -off time is the same as the
timer recording time, only the switch-on or -off
time is effective, and the timer recording time is
not applied.
• If the auto timer is turned on, the MP3/CD or
USB function may require an additional step to
be activated depending on the disc (or device).
It is better for you to select the tuner function
instead.
Cancelling the Timer
After you have set the timer, the unit will start
automatically at the time shown by the TIMER
indication on the display. If you no longer want
to use the timer, you must cancel it.
1. Press the TIMER ON/OFF button to cancel the
timer.
2. Press the TIMER ON/OFF button again to
restart the timer.
• When you select the OFF-TIMER mode, the
TIMER RECORDING and TIMER function are
not available.
Listening to Radio
You can store up to:
15 FM stations, 15 AM stations.
Using buttons on the Remote Control
1. Press the TUNER button to select FM or AM.
2. Tune to the desired station.
• Preset Tuning : Press the TUNING MODE button
to select PRESET, and then press TUNING [ or
] button to select the preset station.
• Automatic Tuning : Press the TUNING MODE
button to select MANUAL, and then press and
hold the TUNING [ or ] button to automatically
search for active broadcasting stations. • Manual Tuning : Press the TUNING MODE button
to select MANUAL, and then briefly press the
TUNING [ or ] button to increase or decrease
the frequency incrementally.
16
English
Using buttons on the Main Unit
1. Press the TUNER/AUX button to select FM or
AM.
2. Tune to the desired station.
• Preset Tuning : Press the STOP ( @ ) button to
select PRESET, and then press [ or ] button
to select the preset station.
• Automatic Tuning : Press the STOP ( @ ) button
to select MANUAL, and then press and hold the
[ or ] button to automatically search for active
broadcasting stations. • Manual Tuning : Press the STOP ( @ ) button to
select MANUAL, and then briefly press the [ or
] button to increase or decrease the frequency
incrementally.
Selecting Mono or Stereo
1. Press the MO/ST button.
• Each time you press the button, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
• This applies only when listening to an FM station.
Presetting Stations
Example : Presetting FM 89.10 in the memory.
1. Press the TUNER button to select FM or AM.
2. Press the TUNING MODE button to select the
<MANUAL> mode.
3. Press the TUNING [ or ] button to select
<89.10>.
4. Press the MEMORY button.
• FM followed by a flashing number appears in
the display. That number is the current preset
number.
5. Press the TUNING [, ] or the ,, . buttons
to scroll through and select a preset number.
• You can select a number from 1 to 15.
6. Press the ENTER (
) button.
• Press the ENTER (
) button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune to a preset station, press the TUNING [
or ] to select a channel.
• You can also use the [ or ] button on the
front panel instead of the TUNING [ or ]
button in step 3, 5, 7.
Recording Function
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. Connect an external USB storage device to the
USB 2 (
) jack on your product.
2. P
lay a disc, tune to a station, or connect an
external source to your product.
CD
• Press the CD/Bluetooth button on the main
unit or press the CD button on the remote
control to select the MP3/CD function.
• Press the OPEN/CLOSE button to open the
disc tray.
• Insert a CD and press the OPEN/CLOSE
button to close the disc tray.
• Use the CD selection buttons ( [ or ] ) to
select the desired song.
Tuner
• Press the TUNER/AUX button on the main
unit or press the TUNER button on the remote
control to select the TUNER function.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to
your product.
• Press the TUNER/AUX button on the main unit
or press the AUX button on the remote control
to select the <AUX> input.
• Play a song from the external device.
USB 1
• Connect a USB device to the USB 1 jack of
your product
• Press the
button on the main unit or
press the USB button on the remote control to
select the USB 1.
• Play a song from USB 1.
3. Press the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button to start
recording all tracks on the disc. "FULL CD
RECORDING" is displayed.
MP3-CD, USB 1
• Press the USB REC button. The currently
playing file is copied onto the USB 2 device.
• Press and hold the USB REC button. All the
files in the current folder are copied onto the
USB 2 device.
COPY: “CHECK”“START”“COPY XX”“COPY END”
is displayed. When the recording is done,
“STOP” will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• Tuner: "TUNER RECORDING""RECORD"
• External Source : "AUX
RECORDING""RECORD"
4. To stop recording, press the STOP (@) button.
The product automatically creates and saves
recorded files in .MP3 format (SAM-XXXX.MP3).
5. To remove the USB device safely, press the STOP
(@) button once again. After recording, a directory
named “RECORDING(DISCxxxx)”(FULL CD
RECORDING), “RECORDING”(TRACK
RECORDING), “CD COPY”(MP3 CD/USB),
“TUNER RECORDING” or “AUX RECORDING”
is created on your USB device.
• Do not disconnect the USB or the AC Cord during
recording as this may cause damage to the file.
• If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
cannot be deleted. If this occurs, please connect the
USB device to a PC, back up the data stored in the
USB, and then format it.
• When the USB memory has insufficient free space,
the system will display “NOT ENOUGH MEMORY”.
• The USB device or HDD you are recording to must
be formatted in the FAT file system. The NTFS file
system is not supported.
• When you use the CD high speed search function,
CD recording is not available.
• Sometimes, the recording time may be longer with
some USB devices.
• In the My List or Auto Change mode, you can't use
the recording function.
• The preset equalizer and user equalize are not
available during a recording.
• The GIGA SOUND and FOOTBALL functions are set
to "OFF" automatically and are not available during a
recording.
• The REPEAT function is set to "OFF" automatically
and is not available during a recording.
• You cannot record the radio when searching or when
no available station is found in the Tuner mode.
• Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in the
recording. If this occurs, lower the external device’s
volume level.
• The maximum TUNER/AUX recording time is 5
hours.
• If USB2 has no USB device connected, and you
press the USB REC button, "USB2 NOT READY" is
displayed.
• If the Hi-Fi Component does not support the USB
device connected to USB2, when you press the
USB REC key, "NOT SUPPORTED USB DEVICE" is
displayed.
English
16
17
Recording Speed
You can select the recording speed before recording.
During the CDDA disc mode, each time you press the
REC SPEED button on the remote control, the
recording speed will change as follows:
NORMAL SPEED RECORD ; HIGH SPEED RECORD
• When you record from the tuner or an external source,
you cannot change the recording speed.
• If you select HIGH SPEED RECORD, sound is not
produced during the recording.
Selecting PRESET EQ Mode
Your MiNi Hi-Fi Component Audio system provides predefined equalizer settings that are optimized for particular music genre.
1. Press the PRESET EQ button.
Each time you press the PRESET EQ button
repeatedly, or press the PRESET EQ button, and
then turn the VOLUME/JOG control on the product, the mode will change as follows:
FLAT;RANCHERA;CUMBIA;REGGAE
;MERENGUE;SALSA;REGGATON
;FOLKLORE;PARTY;POP;HIP HOP
;ROCK;JAZZ;CLASSIC;ELECTRONIC
• Use the VOLUME/JOG control to alter the PRESET
EQ mode, and the selected PRESET EQ mode will be
applied after about 2 seconds.
Selecting USER EQ Mode
You can modify the loudness of an EQ frequency
band using the USER EQ mode.
1. Press the USER EQ button.
2. Press the ENTER button and the EQ band
appears.
3. Press the
or
button to move to a
desired band.
Each time you press the
or
button on
the remote control, the band will change as follows:
80H 0 ; 200H 0 ; 800H 0 ; 2KH 0 ; 8KH 0
4. Press the , or . button or the VOLUME/JOG
control on the front panel to select a level from -6
to +6.
5. Press the ENTER button.
• You can also preset EQ first, repeat Steps 2~4, and
then press the MEMORY button on the remote control
to save your selection to USER EQ.
• In addition, you can use the [ or ] button instead
of the , or . button.
• You can apply the GIGA SOUNG effect to the
FOOTBALL, EQ functions.
18
English
Selecting MY KARAOKE Mode
Set the volume of the vocals when using the
karaoke feature.
Each time you press the MY KARAOKE button on the
remote control, the sound mode will change as follows: ON ; OFF
• OFF: Volume is set to the level of the original sound.
• ON: Volume is set to a level lower than that of the
original sound.
• For My Karaoke mode, this mode works only for CD/MP3,
USB playback. and this mode cannot be applied during
Tuner, Bluetooth, AUX and TV Sound Connect modes.
Using the FOOTBALL MODE
The Football mode brightens the audio you are
listening to and brings greater realism to sports
broadcasts.
1. Press the FOOTBALL MODE button.
Each time you press this button, the sound mode
changes as follows:
ANNOUNCER ; STADIUM ; OFF
2. To cancel this function, press the FOOTBALL
MODE button until “OFF” is displayed.
Using the GIGA SOUND Function
The GIGA SOUND function amplifies the bass
sound and provides twice the bass for powerful,
realistic sound.
1. P
ress the GIGA SOUND BLAST button on the
main unit or the GIGA button on the remote
control. Each time you press this button, the
sound changes as follows:
OFF-GIGA SOUND ; GIGA SOUND BLAST
2. T
o cancel this function, press the GIGA SOUND
BLAST button until “OFF-GIGA SOUND” is
displayed.
Using the NON-STOP RELAY Function
The NON-STOP RELAY function plays music continuously without an interval between tracks/files.
For example, for two successive music files, the
function skips to a position 10 seconds after the
start of the second file when there are 10 seconds
of playing time left in the first file.
1. Press the NON-STOP RELAY button on the
remote control.
Each time you press this button, the mode
changes as follows:
ON-NON-STOP MUSIC RELAY ; OFF-NONSTOP MUSIC RELAY
2. To cancel this function, press the NON-STOP
RELAY button until “OFF-NON-STOP MUSIC
RELAY” is displayed.
• This function is only available during playback of
a CD/USB.
Auto Change Function
You can play a disc followed by a USB continuously.
1. Press the AUTO CHANGE button, and then use
, , . buttons or [, ] buttons to select a
setting, and then press
to apply your
selection.
• If My List Play has not been set in CD/USB
mode, the settings change as follows: AUTO CHANGE OFF ; ALL
• If My List Play has been set in CD/USB mode,
the settings change differently: AUTO CHANGE OFF ; ALL ; MYLIST
• When the AUTO CHANGE mode is "ALL", the Hi-Fi
Component will play music from DISC, USB1, and USB2
continuously.
• When the AUTO CHANGE mode is "MYLIST", the Hi-Fi
Component will play My List tracks from DISC, USB1, and
USB2 continuously.
• When the auto change mode is "ALL/MYLIST", if you press
the POWER button, FUNCTION button, or the OPEN/
CLOSE button, the auto change function automatically
switches to "OFF" mode.
• When the USB is playing, if you disconnected the USB,
the auto change function automatically switches to "OFF"
mode.
• When the auto change mode is "ALL/MYLIST", the unit
cannot record.
• When the auto change mode is "ALL/MYLIST", the
REPEAT function automatically change to OFF.
• When the auto change mode is "ALL/MYLIST", the
DELETE, USB REC, MY LIST and REPEAT functions
do not work, and the unit displays "ALL/MYLIST-AUTO
CHANGE".
• When DISC play ends, if there's no USB 1, the unit will play
music from USB 2.
• When DISC play ends, if there's no USB 1 and USB 2, the
unit will continue to play the disc.
• When USB 2 play ends, if there's no DISC, the unit will play
music from USB 1.
Software Update
Samsung may offer updates for the product's system
firmware in the future.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware update
stored on it to the USB port on your product.
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung
Call Center to receive more information about downloading updates files.
• Select USB function, insert a USB device containing
the firmware update into the USB port on the main
unit.
• Updating firmware may not work properly if audio
files supported by the product are stored in the USB
storage device.
• Do not disconnect the power or remove the USB
device while updates are being applied. The main
unit will turn off automatically after completing the
firmware update.
• After the update, all settings are reset to their factory
default settings. We recommend you write down
your settings so that you can easily reset them after
the update.
If the firmware fails to update, we recommend
formatting the USB device in FAT16/FAT32 and
trying again.
• Once the software update is completed, turn on
the product with no disc inserted. The “NO DISC”
message appears on the display. Press and hold
the STOP button on the main unit for longer than 5
seconds. “INIT ” appears on the display and the unit
powers off. The upgrade is complete.
• Do not format the USB device in the NTFS format.
The product does not support the NTFS file system.
• Depending on the manufacturer, some USB devices
may not be supported.
• The product has a DUAL BOOT function. If the
firmware fails to update, most functions will become
inoperable and "UPGRADE FIRMWARE" will appear
on the display. Update the firmware again.
English
18
19
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the unit,
disconnect the power cord, and contact the nearest authorized dealer or Samsung
Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
No sound.
• The unit does not produce sound during fast playback and slow
playback.
• Are the speakers connected properly?
• Is the disc severely damaged?
The remote control does not
work.
• Is the remote control being operated within its operational angle and
distance range?
• Are the batteries drained?
• The product is not working.
•Reset the unit: With no disc inserted and the “NO DISC” message on
(Example: The power goes out or the display of the product, press and hold the STOP (@) button on the
the front panel key doesn't work
main unit for longer than 5 seconds. or you hear a strange noise.)
Using the RESET function will erase all stored settings.
• The product is not working
Do not use this unless necessary.
normally.
Can't receive radio broadcasts.
20
English
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
Specifications
General
FM Tuner
AM Tuner
CD Disc
Weight (MX-J630)
Weight (MX-J730)
Dimensions
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
CD : 12 mm (COMPACT DISC)
2.15 Kg
2.45 Kg
200 (W) x 308.5 (H) x 230 (D) mm
+5°C~+35°C
10 % to 75 %
55 dB
12 dB
0.6 %
35 dB
58 dB
1.5 %
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
MX-J630- 230 Watts ( MAX)
Front speaker output
115 W/CH (4 Ω / 100 Hz)
MX-J730- 600 Watts ( MAX)
Amplifier
Front speaker output
300 W/CH (4 Ω / 100 Hz)
Frequency range
20 Hz~20 KHz
S/N Ratio
80 dB
Channel separation
55 dB
Input sensitivity
(AUX) 2.0 V
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
Open Source Announcement
To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
• An administration fee may be charged if either:
a. An engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
b. You bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried out.
English
20
21
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
` North America
Contact Center 
CANADA
1-800-SAMSUNG (726-7864)
U.S.A
MEXICO
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864)
Web Site
www.samsung.com/ca /support (English)
www.samsung.com/ca_fr /support (French)
www.samsung.com/us /support
www.samsung.com/mx /support
` Latin America
ARGENTINE
0800-333-3733
URUGUAY
000 405 437 33
PARAGUAY
009 800 542 0001
BRAZIL
CHILE
BOLIVIA
COLOMBIA
COSTA RICA
0800-124-421 (Demais cidades e regiões)
4004-0000 (Capitais e grandes centros)
800-SAMSUNG(726-7864)
800-10-7260
Bogotá 600 12 72
Gratis desde cualquier parte del país 01 8000 112 112 ó
desde su celular #SAM(726)
0-800-507-7267
00-800-1-SAMSUNG (726-7864)
DOMINICA
1-800-751-2676
ECUADOR
1-800-10-72670
1-800-SAMSUNG (72-6786)
EL SALVADOR
800-6225
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PERU
1-800-299-0013
1-800-299-0033
800-27919267
800-2791-9111
1-800-234-7267
1-800-SAMSUNG (726-7864)
001-800-5077267
800-7267
800-0101
0-800-777-08
Desde celulares por favor llamar al número 336 8686
PUERTO RICO
1-800-682-3180
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
VENEZUELA
0-800-SAMSUNG (726-7864)
www.samsung.com/ar/support
www.samsung.com/latin/support(Spanish)
www.samsung.com/latin_en/support(English)
www.samsung.com/latin/support(Spanish)
www.samsung.com/latin_en/support(English)
www.samsung.com.br/support
www.samsung.com/cl /support
www.samsung.com/cl/support
www.samsung.com/co/support
www.samsung.com/latin/support(Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin_en/support(English)
www.samsung.com/latin/support
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/pe/support
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/ve/support