MG279 Series
LCD Monitor
User Guide
Table of contents
Notices.......................................................................................................... iii
Safety information....................................................................................... iv
Care & Cleaning........................................................................................... vi
1.1Welcome!....................................................................................... 1-1
1.2
Package contents.......................................................................... 1-1
1.3
Assembling the monitor............................................................... 1-2
1.4
Connect cables.............................................................................. 1-3
1.4.1
Rear of the LCD monitor.................................................. 1-3
1.5
Monitor introduction..................................................................... 1-4
1.5.1
Using the Controls button ............................................... 1-4
2.1
Detaching the Quick Release stand
(for VESA wall mount).................................................................. 2-1
2.2
Adjusting the monitor................................................................... 2-2
3.1
OSD (On-Screen Display) menu.................................................. 3-1
3.1.1
How to reconfigure........................................................... 3-1
3.1.2
OSD Function Introduction............................................... 3-2
3.2
Specifications................................................................................ 3-9
3.3
Troubleshooting (FAQ)............................................................... 3-10
3.4
Supported Timing List................................................................ 3-11
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
ii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for energy
efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
Made In China
iii
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
• Provide an earthing connection before the mains plug is connected to
the mains. And, when disconnecting the earthing connection, be sure
to disconnect after pulling out the mains plug from the mains.
iv
WARNING
Usage of other than specified head- or earphones can result in hearing
loss due to excessive sound pressures.
v
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
vi
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2.
Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vii
1.1Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2
Package contents
Check your package for the following items:
LCD Monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Cord
1x DP to mini-DP Cable
CD
1x MHL Cable (option)
1x USB Cable (option)
1x DisplayPort Cable (option)
1x HDMI Cable (option)
•
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor MG279 Series
1-1
1.3
Assembling the monitor
To assemble the monitor:
1.
Place the display flat on a cloth on the table, assemble the base
according to the drawing and use a coin to turn the screw tight.
2.
Put the cable clip inset the hole of stand, and adjust the monitor to
the angle that is most comfortable for you.
1
4
3
2
5
1-2
Chapter 1: Product Introduction
1.4
Connect cables
1.4.1
Rear of the LCD monitor
9
HDMI-1/MHL
1
2
3
1.
AC-IN Port
2.
USB upstream Port
3.
USB downstream Port
4.
HDMI-1/MHL
5.
HDMI-2/MHL
6.
DisplayPort
7.
Mini-DP
8.
Earphone Jack
9.
Kensington Lock
ASUS LCD Monitor MG279 Series
4
HDMI-2/MHL
5
DP
6
Mini DP
7
8
1-3
1.5
Monitor introduction
1.5.1
Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
6
5
4
3
2
1
1.
Power Button/Power Indicator:
•
Press this button to turn the monitor on/off.
•
The color definition of the power indicator is as the below table.
2.
Description
White
ON
Amber
Standby mode
OFF
OFF
GameVisual:
•
3.
1-4
Status
Press this hotkey to switch from six video preset modes (Scenery Mode,
Racing Mode, Cinema Mode, RTS/RPG Mode, FPS Mode, and sRGB
Mode) with GameVisual ™ Video Intelligence Technology.
GamePlus:
•
Activate Crosshair or Timer function
•
Move the
( ) button up/down to select and press
confirm the function needed.
(
) to
Chapter 1: Product Introduction
4.
Input Select Button:
•
Use this hotkey to switch from HDMI-1 / MHL, HDMI-2/MHL, Mini-DP or
DisplayPort input signal.
•
Exit the OSD menu.
5.
6.
Close Button
(
5-way) Button:
• Tums on the OSD menu. Enacts the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/
left/right.
ASUS LCD Monitor MG279 Series
1-5
2.1
Detaching the Quick Release stand (for VESA
wall mount)
The Quick Release Stand of this monitor is specially designed for VESA
wall mount.
To detach the Quick Release stand
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use a screwdriver to remove the four screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor while removing the screws.
Figure 1
2
1
Figure 2
1
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor MG279 Series
2-1
2.2
Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling when you change its
angle.
• You can adjust the monitor’s angle from +20˚ to -5˚ and it allows 60˚
swivel adjustment from either left or right. You can also adjust the
monitor’s height within +/- 15cm.
-5°~20°
60°
60°
15cm
Pivoting the monitor
1.
Lift the monitor to the highest position.
2.
Tilt the monitor to its maximum angle.
3.
Pivot the monitor clockwise to the angle you need.
1


20°
2
3
15cm


It is normal that the monitor slightly shakes while you adjust the viewing
angle.
2-2
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
MG279
Racing Mode DisplayPort 2560x1440@60Hz
G
GameVisual
Scenery Mode
Blue Light Filter
Racing Mode
Color
Cinema Mode
Image
RTS/RPG Mode
Input Select
FPS Mode
System Setup
sRGB Mode
MyFavorite
2.
Press the  and  buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3.
To select the highlighted item on the menu press the Center key.
4.
Press the  and  buttons to select the desired parameter.
5.
Press the Center key to enter the slide bar and then use the  or
 buttons, according to the indicators on the menu, to make your
changes.
6.
Press the
/

Press the MENU button to activate the OSD menu.

1.
to move left / right menu.
ASUS LCD Monitor MG279 Series
3-1
3.1.2
OSD Function Introduction
1.GameVisual
This function contains six sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
MG279
Racing Mode DisplayPort 2560x1440@60Hz
G
GameVisual
Scenery Mode
Blue Light Filter
Racing Mode
Color
Cinema Mode
Image
RTS/RPG Mode
Input Select
FPS Mode
System Setup
sRGB Mode
MyFavorite
3-2
•
Scenery Mode: This is the best choice for scenery photo displaying with
GameVisual™ Video Intelligence Technology.
•
Racing Mode: This is the best choice for racing game playing with
GameVisual™ Video Intelligence Technology.
•
Cinema Mode: This is the best choice for movie watching with
GameVisual™ Video Intelligence Technology.
•
RTS/RPG Mode: This is the best choice for Real-Time Strategy(RTS)/
Role-Playing Game(RPG) playing with GameVisual™ Video Intelligence
Technology.
•
FPS Mode: This is the best choice for First Person Shooter game playing
with GameVisual™ Video Intelligence Technology.
•
sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
•
In the Racing Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
•
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
Chapter 3: General Instruction
2.
Blue Light Filter
Adjust the energy level of blue light emitted from LED backlight
MG279
Racing Mode DisplayPort 2560x1440@60Hz
G
GameVisual
Level 0
Blue Light Filter
Level 1
Color
Level 2
Image
Level 3
Input Select
Level 4
System Setup
MyFavorite
•
Level 0: No change.
•
Level 1~4: The higher the level,the more blue light will be reduced.
•
When Blue Light Filter is activated,the default settings of Racing Mode will be
automatically imported.
•
Between Level 1 to Level 3, the Brightness function is user-configurable.
•
Level 4 is optimized setting. It is compliance with TUV Low Blue Light
Certification. The Brightness function is not user-configurable.
ASUS LCD Monitor MG279 Series
3-3
3.Color
Select the image color you like from this function.
MG279
Racing Mode DisplayPort 2560x1440@60Hz
G
GameVisual
Brightness
Blue Light Filter
Contrast
Color
Saturation
Image
Color Temp.
Input Select
Skin Tone
System Setup
MyFavorite
•
Brightness: The adjusting range is from 0 to 100.
•
Contrast: The adjusting range is from 0 to 100.
•
Saturation: The adjusting range is from 0 to 100.
•
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
•
Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
•
3-4
In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100.
Chapter 3: General Instruction
4.Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR and FreeSync, from this main function.
MG279
Racing Mode DisplayPort 2560x1440 @ 60Hz
G
GameVisual
Sharpness
Blue Light Filter
Trace Free
Color
Aspect Control
Image
VividPixel
Input Select
ASCR
System Setup
FreeSync
MyFavorite
•
Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
•
Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
•
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “1:1”,
“Overscan”.
•
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
•
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
•
FreeSync (DP/Mini-DP only): It can allow a FreeSync supported*
graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efficient, virtually stutter free and
low-latency display update.
•
4:3 is only available when input source is in 4:3 format。OverScan is only
available for the HDMI input source.
•
FreeSync only can be activated within “35Hz ~ 90Hz”.
•
FreeSync supported AMD GPUs: Radeon R9 295X2, R9 290, and R9 285
graphics cards.
•
For other supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
ASUS LCD Monitor MG279 Series
3-5
5.
Input Select
Select the input source from HDMI/MHL-1, HDMI/MHL-2,
DisplayPort or Mini DisplayPort input signal.
MG279
Racing Mode DisplayPort 2560x1440 @ 60Hz
G
GameVisual
HDMI/MHL-1
Blue Light Filter
HDMI/MHL-2
Color
DisplayPort
Image
Mini DisplayPort
Input Select
System Setup
MyFavorite
6.
System Setup
Adjusts the system configuration.
MG279
Racing Mode DisplayPort 2560x1440 @ 60Hz
G
GameVisual
GameVisual Demo Mode
Blue Light Filter
Volume
Color
GamePlus
Image
DisplayPort Stream
Input Select
ECO Mode
System Setup
OSD Setup
MyFavorite
Language
More
MG279
Racing Mode DisplayPort 2560x1440 @ 60Hz
G
3-6
GameVisual
Back
Blue Light Filter
Key Lock
Color
Information
Image
Power Indicator
Input Select
Power Key Lock
System Setup
USB Charging
MyFavorite
All Reset
Chapter 3: General Instruction
•
GameVisual Demo Mode: Activate the demo mode for the GameVisual
function.
•
Volume: Adjusts the output volume level.
•
GamePlus: The GamePlus Function provides a toolkit and creates a
better gaming environment for users when playing different types of
games. Particularly, Aimpoint function is specially designed for new
gamers or beginners interested in First Person Shooter (FPS) games.
To active GamePlus:
Select ON to enter the GamePlus main menu.
•
Press  and  to select between Aimpoint and Timer function.
•
Press Center key to confirm the function you choose. Press
back. Press X to go off, and exit.

•
to go
GamePlus main menu GamePlus-Aimpoint GamePlus-Timer
•
DisplayPort Stream: Compatibility with graphic card. Select DP 1.1 or
DP 1.2 by graphic card DP version.
•
ECO Mode: Activate the ecology mode for power saving.
•
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
•
Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Traditional Chinese,
Simplified Chinese, Japanese, Persian, Thai, Indonesian, Poland,
Turkey, Portugal, Czech, Croatia, Hungary, Romania, and Korean.
•
More: Return the next page of System Setting.
•
Back: Return the previous page of System Setting.
•
Key Lock: Disable all key functions. Pressing the down key for more
than five seconds to disable key lock function.
•
Information: Displays the monitor information.
•
Power Indicator: Turn the power LED indicator on/off.
•
Power Key Lock: To disable / enable power key.
ASUS LCD Monitor MG279 Series
3-7
•
USB Charging: Turn On/Off USB charging function during the standby
mode.
•
All Reset: Selects “Yes” to revert all settings to the factory default mode.
7.MyFavorite
Load/Save all settings on the monitor.
MG279
Racing Mode DisplayPort 2560x1440@60Hz
G
GameVisual
Setting1
Load
Blue Light Filter
Setting 2
Save
Color
Setting 3
Image
Setting 4
Input Select
System Setup
MyFavorite
3-8
Chapter 3: General Instruction
3.2
Specifications
Model
MG279Q
Panel Size
27.0”W (68.47 cm)
Max. Resolution
2560 x 1440
Brightness (Typ.)
350cd/m2
Intrinsic Contrast Ratio (Typ.)
≥1000:1
Viewing Angle (CR>10)
178°(V) /178°(H)
Display Colors
16.7 M(True 8bit)
Response Time
4ms (GTG)
Satellite Speaker
2W x 2 stereo
Earphone Output
Yes
HDMI/MHL input
Yes x 2
Mini-DP input
Yes
DisplayPort input
Yes
USB 3.0 Hub
Power ON Consumption
Yes (Upstream x 1, Downstream x 2)
< 38.7W*
Chassis Colors
Black
Power saving mode
< 0.5W
Power off mode
< 0.5W
Tilt
-5° ~ +20°
Swivel(angle)
+60°~-60°
Pivot(angle/direction)
90°(clockwise)
Height Adjustment (mm)
Yes(0~150mm)
VESA Wall Mounting
Yes (100mm x 100mm)
Phys. Dimension (WxHxD)
625 x 559 x 238 mm
Phys. Dimension w/o Stand
(WxHxD)
625 x 368 x 63 mm
Box Dimension (WxHxD)
753 x 452 x 224 mm
Net Weight (Esti.)
7.3 kg
Gross Weight (Esti.)
10.5 kg
Voltage Rating
AC 100~240V(Built-in)
Note:*Based on Energy Star 6.0 standard
ASUS LCD Monitor MG279 Series
3-9
3.3
Troubleshooting (FAQ)
Problem
Power LED is not ON
Possible Solution
• Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check Power Indicator function in main menu OSD.
Select “ON” to turn on power LED.
The power LED lights amber and • Check if the monitor and the computer are in the
there is no screen image
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark
• Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave • Make sure the signal cable is properly connected to
pattern is present in the image
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
3-10
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low
• Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
Chapter 3: General Instruction
3.4
Supported Timing List
VESA/IBM Modes Support Timing(HDMI and DisplayPort
inputs)
Resolution
Refresh Rate
Horizontal Frequency
640x350
70Hz
31.469kHz
640x480
60Hz
31.469kHz
640x480
67Hz
35kHz
640x480
75Hz
37.5kHz
720x400
70Hz
31.469kHz
800x600
56Hz
35.156kHz
800x600
60Hz
37.879kHz
800x600
72Hz
48.077kHz
800x600
75Hz
46.875kHz
832x624
75Hz
49.725kHz
848x480
60Hz
31.02kHz
1024x768
60Hz
48.363kHz
1024x768
70Hz
56.476kHz
1024x768
75Hz
60.023kHz
1152x864
75Hz
67.5kHz
1280x720
60Hz
44.772kHz
1280x800
60Hz
49.702kHz
1280x960
60Hz
60kHz
1280x1024
60Hz
63.981kHz
1280x1024
75Hz
79.976kHz
1366x768
60Hz
47.712kHz
1440x900
60Hz
55.935kHz
1440x900
75Hz
49.725kHz
1680x1050
60Hz
65.29kHz
1680x1050
60Hz
64.674kHz
1920x1080
60Hz
67.5kHz
1920x1080
60Hz
66.587kHz
2560x1440
60Hz
88.787kHz
2560x1440(Only for DP)
120Hz
182.817kHz
2560x1440(Only for DP)
144Hz
221.97kHz
WQHD Mode
* HDMI and DisplayPort, some graphics cards only support up to 1920 x 1200 resolution content
transmission via HDMI. And some graphics cards can’t support 1920x1080 100Hz/120Hz. Please
check with your local distributor or retailer on the hardware limitations of your laptop or desktop.
ASUS LCD Monitor MG279 Series
3-11
CEA-861 Formats Supported Timings (HDMI/MHL and
DisplayPort input)
Resolution
Refresh Rate
Horizontal Frequency
640x480P
59.94 / 60Hz
31.469 / 31.5kHz
720x480P
59.94 / 60Hz
31.469 / 31.5kHz
720x576P
50Hz
31.25kHz
1280x720P
50Hz
37.5kHz
1280x720P
59.94 / 60Hz
44.955 /45kHz
1440x480P
59.94 / 60Hz
31.469 / 31.5kHz
1440x576P
50Hz
31.25kHz
1920x1080P
50Hz
56.25kHz
1920x1080P
59.94 / 60Hz
67.433 / 67.5kHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
3-12
Chapter 3: General Instruction