Siemens KI21RAF30G refrigerator

Refrigerator
KI51R.. / KI41R.. / KI31R.. / KF31R.. / KI21R.. / KF21R..
en
User manual
en Table of Contents
Safety and warning information ............
Information concerning disposal ..........
Scope of delivery ....................................
Room temperature, ventilation
and cavity depth ......................................
Installation location .................................
Connecting the appliance .....................
Getting to know your appliance ...........
Switching on the appliance ...................
Setting the temperature .........................
Alarm function .........................................
Usable capacity .......................................
Refrigerator compartment .....................
3
5
5
6
6
7
7
8
9
9
9
9
Super cooling .......................................
Interior fittings .......................................
Sticker “OK” ..........................................
Switching off and disconnecting
the appliance ........................................
Cleaning the appliance .......................
Odours ...................................................
Light (LED) ............................................
Tips for saving energy ........................
Operating noises .................................
Eliminating minor faults yourself .......
Appliance self-test ...............................
Customer service .................................
10
11
11
11
12
13
13
13
14
14
16
16
en
enTable of ContentsenI struction for Use
Safety and warning
information
Before you switch ON the
appliance
Please read the operating and
installation instructions carefully! They
contain important information on how to
install, use and maintain the appliance.
The manufacturer is not liable if you fail
to comply with the instructions and
warnings. Retain all documents for
subsequent use or for the next owner.
Technical safety
This appliance contains a small quantity
of environmentally-friendly but flammable
R600a refrigerant. Ensure that the tubing
of the refrigerant circuit is not damaged
during transportation and installation.
Leaking refrigerant may cause eye
injuries or ignite.
If damage has occurred
■ Keep naked flames and/or ignition
sources away from the appliance,
■ thoroughly ventilate the room for
several minutes,
■ switch off the appliance and pull out
the mains plug,
■ inform customer service.
The more refrigerant an appliance
contains, the larger the room must be in
which the appliance is situated. Leaking
refrigerant can form a flammable gas-air
mixture in rooms which are too small.
The room must be at least 1 m³ per 8 g
of refrigerant. The amount of refrigerant
in your appliance is indicated on the
rating plate inside the appliance.
If the power cord of this appliance is
damaged, it must be replaced by the
manufacturer, customer service or a
similarly qualified person. Improper
installations and repairs may put the user
at considerable risk.
Repairs may be performed by the
manufacturer, customer service or a
similarly qualified person only.
Only original parts supplied by the
manufacturer may be used. The
manufacturer guarantees that only these
parts satisfy the safety requirements.
A extension cable may be purchased
from customer service only.
3
en
Important information when
using the appliance
■
■
■
■
■
■
■
■
■
■
4
Never use electrical appliances inside
the appliance (e.g. heater, electric ice
maker, etc.). Risk of explosion!
Never use a steam cleaner to defrost
or clean the appliance! The steam
may penetrate electrical parts
and cause a short-circuit. Risk of
electric shock!
Do not use pointed or sharp-edged
implements to remove frost or layers
of ice. You could damage
the refrigerant tubing. Leaking
refrigerant may ignite or cause eye
injuries.
Do not store products which contain
flammable propellants (e.g. spray
cans) or explosive substances in
the appliance. Risk of explosion!
Do not stand or support yourself on
the base, drawers or doors, etc.
Before defrosting and cleaning
the appliance, pull out the mains plug
or switch off the fuse. Do not pull out
the mains plug by tugging the cable.
Bottles which contain a high
percentage of alcohol must be sealed
and stored in an upright position.
Keep plastic parts and the door seal
free of oil and grease. Otherwise,
parts and door seal will become
porous.
Never cover or block the ventilation
openings for the appliance.
People (childern incl.) who have
limited physical, sensory or mental
abilities or inadequate knowledge
must not use this appliance unless
they are supervised or given
meticulous instructions.
Children in the household
■
■
■
Keep children away from packaging
and its parts.
Danger of suffocation from folding
cartons and plastic film!
Do not allow children to play with the
appliance!
If the appliance features a lock:
keep the key out of the reach of
children!
General regulations
The appliance is suitable for refrigerating
food.
This appliance is intended for use in
the home and the home environment.
The appliance is suppressed according
to EU Directive 2004/108/EC.
The refrigeration circuit has been
checked for leaks.
This product complies with the relevant
safety regulations for electrical
appliances (EN 60335-2-24).
en
Information concerning
disposal
* Disposal of packaging
The packaging protects your appliance
from damage during transit. All utilised
materials are environmentally safe and
recyclable. Please help us by disposing
of the packaging in an environmentally
friendly manner.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
* Disposal of your old
appliance
Old appliances are not worthless
rubbish! Valuable raw materials can be
reclaimed by recycling old appliances.
This appliance is identified
according to the European
guideline 2002/96/EC on waste
electrical and electronic
equipment – WEEE. The directive
specifies the framework for an
EU-wide valid return and re-use
of old appliances.
m Warning
Redundant appliances
1. Pull out the mains plug.
2. Cut off the power cord and discard
with the mains plug.
3. Do not take out the trays
and receptacles: children are
therefore prevented from climbing in!
4. Do not allow children to play with
the appliance once it has spent its
useful life. Danger of suffocation!
Refrigerators contain refrigerant
and gases in the insulation. Refrigerant
and gases must be disposed
of professionally. Ensure that tubing
of the refrigerant circuit is not damaged
prior to proper disposal.
Scope of delivery
After unpacking all parts, check for any
damage in transit.
If you have any complaints, please
contact the dealer from whom you
purchased the appliance or our
customer service.
The delivery consists of the following
parts:
■ Built-in appliance
■ Interior fittings (depending on model)
■ Bag containing installation materials
■ Operating instructions
■ Installation manual
■ Customer service booklet
■ Warranty enclosure
■ Information on the energy
consumption and noises
5
en
Room temperature,
ventilation and cavity
depth
Cavity depth
A cavity depth of 560 mm
is recommended for the appliance.
If the cavity depth is smaller – at least
550 mm – the energy consumption
increases slightly.
Ambient temperature
The appliance is designed for a specific
climate class. Depending on the climate
class, the appliance can be operated at
the following temperatures.
The climate class can be found on
the rating plate. Fig. .
Climate class
SN
N
ST
T
Permitted ambient temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C
Note
The appliance is fully functional within
the room temperature limits
of the indicated climatic class. If
an appliance of climatic class SN
is operated at colder room temperatures,
the appliance will not be damaged up to
a temperature of +5 °C.
Ventilation
The air on the rear panel of
the appliance heats up. Conduction of
the heated air must not be obstructed.
Otherwise, the refrigeration unit must
work harder. This increases power
consumption. Therefore: Never cover
or block the ventilation openings!
6
Installation location
Install the appliance in a dry, well
ventilated room. The installation location
should neither be exposed to direct
sunlight nor near a heat source, e. g.
a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use
a suitable insulating plate or observe
the following minimum distances to a
heat source:
■
■
3 cm to electric or gas cookers.
30 cm to an oil or coal-fired cooker.
en
Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance is switched on.
During transportation the oil in
the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for
the first time, clean the interior of
the appliance (see chapter “Cleaning
the appliance”).
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220-240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in nonEuropean countries, check whether the
stated voltage and current type match
the values of your mains supply. This
information can be found on the rating
plate. Fig. .
m Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mainscontrolled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
* Not all models.
1-5
6*
7
8
9*
10
11
12
13*
14
Controls
Fan
Light
Glass shelf
Extendable glass shelf
Vegetable container with humidity
control
Butter and cheese compartment
Door shelf
Vario door shelf
Shelf for large bottles
7
en
Controls
Fig. "
1
2
3
4
5
On/Off button
Serves to switch the appliance on
and off.
“super” button
Is used to switch on the super
cooling (see chapter entitled
“Super cooling”).
Temperature selection button
Press this button to set the
temperature.
Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
Switching on
the appliance
Fig. "
Switch on the appliance with the
On/Off button 1.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
■
■
■
8
After the appliance has been switched
on, it may take several hours until
the set temperature has been
reached.
Do not put any food in the appliance
beforehand.
While the refrigeration unit is running,
water droplets or hoarfrost may form
at the rear panel of the refrigerator.
This is due to functional reasons.
It is not necessary to scrape off
the frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects in the
drainage channel and is carried
to the refrigeration unit where it
evaporates. Fig. #
The front sides of the housing are
partly heated slightly. This prevents
condensation in the area of the door
seal.
en
Setting
the temperature
Refrigerator
compartment
Fig. "
The refrigerator compartment is the ideal
storage location for meat, sausage, fish,
dairy products, eggs, ready meals
and pastries.
Refrigerator compartment
The temperature can be set from
+2 °C to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Alarm function
Storing food
■
■
■
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close
the door to switch off the warning signal.
Switching off the alarm
Fig. "
Press the alarm button 5 to switch off
the warning signal.
■
Store fresh, undamaged food. The
quality and freshness will then
be retained for longer.
In the case of ready-made products
and bottled goods, observe the bestbefore date or use-by date specified
by the manufacturer.
To retain aroma, colour
and freshness, pack or cover food
well before placing in the appliance.
This will prevent the transfer
of flavours and the discolouration
of plastic parts in the refrigerator
compartment.
Allow warm food and drinks to cool
down before placing in the appliance.
Note
Avoid contact between food and rear
panel. Otherwise the air circulation will
be impaired.
Food or packaging could freeze to
the rear panel.
Usable capacity
Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. .
9
en
Note the chill zones in the
refrigerator compartment
The air circulation in the refrigerator
compartment creates different chill
zones:
■
■
Coldest zone is between the arrow
stamped on the side and the glass
shelf situated below. Fig. $
Note
Store perishable food (e.g. fish,
sausage, meat) in the coldest zone.
Warmest zone is at the very top
of the door.
Note
Store e.g. hard cheese and butter
in the warmest zone. Cheese can then
continue to release its flavour and the
butter will still be easy to spread.
Vegetable container with
humidity controller
Fig. %
The vegetable container is the optimum
storage location for fresh fruit and
vegetables. A humidity controller and
a special seal can be used to adjust the
air humidity in the vegetable container.
This allows fresh fruit and vegetables
to be stored twice as long as with
conventional storage.
The air humidity in the vegetable
container can be set according to the
type and amount of products to be
stored:
■ Mainly fruit as well as for a large load
– lower air humidity
■ Mainly vegetables as well as for
a mixed load or small load – higher air
humidity
10
Notes
■ Fruit sensitive to cold (e.g. pineapple,
banana, papaya and citrus fruit) and
vegetables sensitive to cold (e.g.
aubergines, cucumbers, zucchini,
peppers, tomatoes and potatoes)
should be stored outside
the refrigerator at temperatures
of approx. +8 °C to +12 °C for
optimum preservation of quality and
flavour.
■ Condensation may form in the
vegetable container depending on the
type and quantity of products stored.
Remove condensation with a dry cloth
and adjust air humidity in the
vegetable container with the humidity
controller.
Super cooling
Super cooling sets the refrigerator
temperature to the coldest temperature
setting for approx. 15 hours. Then
the appliance automatically switches
to the temperature set prior to super
cooling mode.
Switch on super cooling mode, e.g.
■
■
before placing large quantities of food
in the refrigerator compartment.
for the fast cooling of drinks.
Switching on and off
Fig. "
Press “super” button 2.
The button is lit when super cooling is
switched on.
Note
When super cooling is switched on,
increased operating noises may occur.
en
Interior fittings
Sticker “OK”
(not all models)
(not all models)
The “OK” temperature monitor
can be used to determine temperatures
below +4 °C. Gradually reduce
the temperature if the sticker
does not indicate “OK”.
Glass shelves
Fig. &
If required, you can vary the shelves
inside the appliance: To do this, pull out
shelf, lift at the front and take out.
Extendable glass shelf
Fig. '
The extendable glass shelf can be pulled
out for a better overview of the food.
Vario shelf
Fig. (
To facilitate the storage of tall items (e.g.
cans or bottles), the front part of the
Vario shelf can be taken out and pushed
under the rear part.
Vario door shelf
Fig. )
The position of the Vario door shelf can
be moved to the side so that tall bottles
can be stored on the lower shelf.
Bottle holder
Fig. *
The bottle holder prevents bottles
from falling over when the door
is opened and closed.
Note
When the appliance is switched on,
it may take 12 hours until
the temperature is reached.
Correct setting
Switching off and
disconnecting the
appliance
Switching off the appliance
Fig. "
Press the On/Off button 1.
Temperature display goes out,
refrigerating unit switches off.
Disconnecting the appliance
If you do not use the appliance
for a prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.
11
en
Cleaning the appliance
m Caution
■
■
■
Do not use abrasive, chloride or acidic
cleaning agents or solvents.
Do not use scouring or abrasive
sponges. The metallic surfaces could
corrode.
Never clean the shelves or containers
in the dishwasher. The parts may
become deformed!
Proceed as follows:
1. Before cleaning: Switch off
the appliance.
2. Pull out the mains plug or switch off
the fuse!
3. Take out the food and store in a cool
location. Place ice pack (if available)
on the food.
4. Wait until the layer of frost has thawed.
5. Clean the appliance with a soft cloth,
lukewarm water and a little pH neutral
washing-up liquid. The rinsing water
must not run into the light or through
the drainage hole into the evaporation
area.
6. Wipe the door seal with clear water
only and then wipe dry thoroughly.
7. After cleaning reconnect and switch
the appliance back on.
8. Put the food back into the appliance.
12
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Take out glass shelves
Fig. &
To do this, pull out shelf, lift at the front
and take out.
Taking out extendable glass shelf
Fig. '
Press levers on the underside on both
sides, pull forwards glass shelf, lower
and swivel out to the side.
Condensation channel
Fig. #
Regularly clean the condensation
channel and drainage hole with a cotton
bud or similar implement to ensure that
the condensation can drain.
Take out shelves in the door
Fig. +
Lift shelves upwards and take out.
Taking out glass shelf above vegetable
container
Fig. The glass shelf can be taken out and
disassembled for cleaning.
Note
Before taking out the glass shelf, pull out
vegetable container.
Removing the container
Fig. ,
Pull out the container all the way, lift at
the front and remove.
en
Odours
Light (LED)
If you experience unpleasant odours:
Your appliance features a maintenancefree LED light.
These lights may be repaired
by customer service or authorised
technicians only.
1. Switch off the appliance with the On/
Off button. Fig. "/1
2. Take all food out of the appliance.
3. Clean interior (see chapter “Cleaning
the appliance”).
4. Clean all packages.
5. Seal strong smelling food in order
to avoid odours from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation
of odours is still occuring after
24 hours.
Tips for saving energy
■
■
■
■
■
■
■
Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Select 560 mm cavity depth.
A smaller cavity depth will result in
a higher energy consumption.
Allow warm food and drinks to cool
down before placing in the appliance.
Thaw frozen food in the refrigerator
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
Open the appliance as briefly as
possible.
Occasionally clean the rear
of the appliance to prevent an
increased power consumption.
The arrangement of the fittings does
not affect the energy rating of the
appliance.
13
en
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating
units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are
switching on/off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit
level. If required, place something
underneath.
Containers or storage areas wobble
or stick
Please check the removable parts
and re-insert them correctly if required.
Bottles or receptacles are touching
each other
Move the bottles or receptacles slightly
away from each other.
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice – even if the appliance is still under
guarantee!
Fault
Temperature differs
greatly from the set
value.
Displays do not
illuminate.
14
Possible cause
Remedial action
In some cases it is adequate
to switch off the appliance
for 5 minutes.
If the temperature is too high wait
a few hours and check whether
the temperature has approached
the set value.
If the temperature is too low check
the temperature again the next day.
Power failure; the fuse Connect mains plug. Check whether
has been switched off; the power is on, check the fuses.
the mains plug
has not been inserted
properly.
en
Fault
Possible cause
Remedial action
The light does not
function.
The LED light
is defective.
See chapter “Light (LED)” section.
Appliance was open
too long.
Light is switched off
after approx. 10 min.
When the appliance is closed and
opened, the light is on again.
Bottom of the
refrigerator
compartment is wet.
The condensation
channel or drainage
hole are blocked.
Clean the condensation channel
and the drainage hole. See chapter
Cleaning the appliance. Fig. #
The temperature in
the refrigerator
compartment is too
cold.
Temperature has been Increase the temperature.
set too low.
The refrigerating unit
is switching on more
frequently and for
longer.
Appliance opened
frequently.
Do not open the appliance
unnecessarily.
The ventilation
openings have been
covered.
Remove obstacles.
Appliance is not
cooling, temperature
display and light
are lit.
Showroom mode is
switched on.
Hold down temperature selection
button fig. "/3 for 10 seconds until
an acknowledgement signal sounds.
After a short time check whether
your appliance is cooling.
15
en
Appliance self-test
Customer service
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).
These specifications
can be found on the rating plate. Fig. .
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Starting the appliance self-test
1. Switch off the appliance and wait
5 minutes.
2. Switch on appliance and hold down
the super button, Fig. "/2, for
3-5 seconds within the first
10 seconds until an acoustic signal
sounds.
The self-test programme starts.
While the self-test is running, a long
acoustic signal sounds.
When the self-test ends and an acoustic
signal sounds twice, your appliance is
in working order.
If the Super button flashes for
10 seconds and 5 acoustic signals
sound, there is a fault. Inform customer
service.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB
0844 892 8999
IE
US
01450 2655
866 447 4363
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
16
Calls from a BT
landline will be
charged at up
to 3 pence per
minute. A call
set-up fee of up
to 6 pence may
apply.
toll-free
!
ƒ&
"
#
$
%
&
'
(
)
*
+
,
-
E - Nr
FD - Nr
.
9000825193 (9411)
en